Structure and remodelling of the human parietal bone: An age and gender histomorphometric study

A multimodal 3D imaging approach of pore networks in the human femur to assess age-associated vascular expansion and Lacuno-Canalicular reduction

Cellular communication in the mechanosensory osteocyte Lacuno-Canalicular Network (LCN) regulates bone tissue remodeling throughout life. Age-associated declines in LCN size and connectivity dysregulate mechanosensitivity to localized remodeling needs of aging or damaged tissue, compromising bone quality. Synchrotron radiation-based micro-Computed Tomography (SRμCT) and Confocal Laser Scanning Microscopy (CLSM) were employed to visualize LCN and vascular canal morphometry in an age series of the anterior femur (males n = 14, females n = 11, age range = 19-101, mean age = 55). Age-associated increases in vascular porosity were driven by pore coalescence, including a significant expansion in pore diameter and a significant decline in pore density. In contrast, the LCN showed significant age-associated reductions in lacunar volume fraction, mean diameter, and density, and in canalicular volume fraction and connectivity density. Lacunar density was significantly lower in females across the lifespan, exacerbating their age-associated decline. Canalicular connectivity density was also significantly lower in females but approached comparable declining male values in older age. Our data illuminate the trajectory and potential morphometric sources of age-associated bone loss. Increased vascular porosity contributes to bone fragility with aging, while an increasingly reduced and disconnected LCN undermines the mechanosensitivity required to repair and reinforce bone. Understanding why and how this degradation occurs is essential for improving the diagnosis and treatment of age-related changes in bone quality and fragility.

Three-dimensional environment and vascularization induce osteogenic maturation of human adipose-derived stem cells comparable to that of bone-derived progenitors

While human adipose‐derived stem cells (hADSCs) are known to possess osteogenic differentiation potential, the bone tissues formed are generally considered rudimentary and immature compared with those made by bone‐derived precursor cells such as human bone marrow‐derived mesenchymal stem cells (hBMSCs) and less commonly studied human calvarium osteoprogenitor cells (hOPs). Traditional differentiation protocols have tended to focus on osteoinduction of hADSCs through the addition of osteogenic differentiation media or use of stimulatory bioactive scaffolds which have not resulted in mature bone formation. Here, we tested the hypothesis that by reproducing the physical as well as biochemical bone microenvironment through the use of three‐dimensional (3D) culture and vascularization we could enhance osteogenic maturation in hADSCs. In addition to biomolecular characterization, we performed structural analysis through extracellular collagen alignment and mineral density in our bone tissue engineered samples to evaluate osteogenic maturation. We further compared bone formed by hADSCs, hBMSCs, and hOPs against mature human pediatric calvarial bone, yet not extensively investigated. Although bone generated by all three cell types was still less mature than native pediatric bone, a fibrin‐based 3D microenvironment together with vascularization boosted osteogenic maturation of hADSC making it similar to that of bone‐derived osteoprogenitors. This demonstrates the important role of vascularization and 3D culture in driving osteogenic maturation of cells easily available but constitutively less committed to this lineage and suggests a crucial avenue for recreating the bone microenvironment for tissue engineering of mature craniofacial bone tissues from pediatric hADSCs, as well as hBMSCs and hOPs.

Bone surrogates provide authentic onlay graft fixation torques

Onlay graft bone augmentation is a standard practice to restore the loss of height of the alveolar ridge following loss of a tooth. Cranial grafts, lifted from the parietal bone, are sandwiched and used to bridge the bony defect in the jaw by means of small screws. During the elevation of the covering gum and subsequent screw placement, care has to be taken in order to preserve underlying nerves. Therefore, to avoid harm to the patient, a solid education of surgeons is essential, which requires training and experience. A simulator for cranial graft-lift training was already developed and shall be expanded to train the augmentation of the lifted implants. Therefore, in this study, synthetic bones for onlay block graft screw placement with realistic haptics for the screw application training were evaluated and compared with human specimens. Six different polyurethane based bone surrogate composites, enriched with varying amounts of calcium-based mineral fillers and blowing agents, were developed. The haptical properties of these synthetic bones were validated for screw placement and compared with human parietal bone specimens. For that, bones were pre-drilled, screws were automatically inserted using a customized testbench and the slope of the screw-insertion torques were analyzed. The slope of the screw insertion torques of the human reference bones was 56.5 ± 14.0 * 10^-3 Nm/deg, Surrogates with lower amounts of mineral fillers and blowing agents showed lower torques than the human bone. Synthetic bones, validated for drilling, milling and sawing in an earlier study, also achieved significantly lower torques, which were only the half of the human parietal bones. Two intermediate stages of the aforementioned material compositions, consisting of 75% mineral filler with 0.75% blowing agent and 100% mineral filler with 1.00% blowing agent revealed results comparable with human bone (57.4 ± 10.2 *10^-3 Nm/deg, p = 0.893 and 54.9 ± 11.1 *10^-3 Nm/deg, p = 0.795, respectively). In conclusion, our findings suggest that, two newly developed polyurethane-based materials mimicking the haptical properties of an onlay bone graft screw fixation, have been identified. Thus, these surrogates are capable of mimicking real bone tissue in our simulator for the education of novice surgeons.

Characterization of an artificial skull cap for cranio-maxillofacial surgery training

Cranial grafts are favored to reconstruct skeletal defects because of their reduced resorption and their histocompatibility. Training possibilities for novice surgeons include the "learning by doing" on the patient, specimens or simulators. Although the acceptance of simulators is growing, the major drawback is the lack of validated bone models. The aim of this study was to create and validate a realistic skull cap model and to show superiority compared to a commercially available skull model. Characteristic forces during machinery procedures were recorded and thickness parameters from the bony layers were obtained. The thickness values of the bone layers of the developed parietal bone were comparable to the human ones. Differences between drilling and sawing forces of human and artificial bones were not detected using statistical analysis. In contrast the parameters of the commercially available skull model were significantly different. However, as a result, a model-based simulator for tabula externa graft lift training, consisting of a brain, skull bone cap and covering soft tissues was created. This simulator enables the training of all procedural steps of a "split thickness graft lift". In conclusion, an artificial skull cap suitable for parietal graft lift training was manufactured and validated against human parietal bones.

MCP-1 Feedback Loop Between Adipocytes and Mesenchymal Stromal Cells Causes Fat Accumulation and Contributes to Hematopoietic Stem Cell Rarefaction in the Bone Marrow of Patients With Diabetes

Fat accumulates in bone marrow (BM) of patients with diabetes. In this study, we investigated the mechanisms and consequences of this phenomenon. BM mesenchymal stromal cells (BM-MSCs) from patients with type 2 diabetes (T2D) constitutively express adipogenic markers and robustly differentiate into adipocytes (ADs) upon in vitro induction as compared with BM-MSCs from subjects without diabetes. Moreover, BM-ADs from subjects with T2D (T2D BM-ADs) paracrinally stimulate a transcriptional adipogenic program in BM-MSCs. Antagonism of MCP-1, a chemokine pivotally expressed in T2D BM-ADs, prevented the T2D BM-AD secretome from converting BM-MSCs into ADs. Mechanistic validation of human data was next performed in an obese T2D mouse model. Systemic antagonism of MCP-1 improved metabolic control, reduced BM fat, and increased osteocyte density. It also indirectly re-established the abundance of long-term versus short-term hematopoietic stem cells. We reveal a diabetic feedback loop in which 1) BM-MSCs are constitutively inclined to make ADs, and 2) mature BM-ADs, via secreted MCP-1, relentlessly fuel BM-MSC determination into new fat. Pharmacological inhibition of MCP-1 signaling can contrast this vicious cycle, restoring, at least in part, the balance between adipogenesis and hematopoiesis in BM from subjects with T2D.

Aging, Osteocytes, and Mechanotransduction

PURPOSE OF REVIEW

The bone is able to adapt its structure to mechanical signals via the bone remodeling process governed by mechanosensitive osteocytes. With aging, an imbalance in bone remodeling results in osteoporosis. In this review, we hypothesized that changes in lacunar morphology underlie the decreased bone mechanoresponsiveness to mechanical loading with aging.

RECENT FINDINGS

Several studies have reported considerable variations in the shape of osteocytes and their lacunae with aging. Since osteocytes can sense matrix strain directly via their cell bodies, the variations in osteocyte morphology may cause changes in osteocyte mechanosensitivity. As a consequence, the load-adaptive response of osteocytes may change with aging, even when mechanical loading would remain unchanged. Though extensive quantitative data is lacking, evidence exists that the osteocyte lacunae are becoming smaller and more spherical with aging. Future dedicated studies might reveal whether these changes would affect osteocyte mechanosensation and the subsequent biological response, and whether this is (one of) the pathways involved in age-related bone loss.

Reliability of new poly (lactic-co-glycolic acid) membranes treated with oxygen plasma plus silicon dioxide layers for pre-prosthetic guided bone regeneration processes

BACKGROUND

The use of cold plasmas may improve the surface roughness of poly(lactic-co-glycolic) acid (PLGA) membranes, which may stimulate the adhesion of osteogenic mediators and cells, thus accelerating the biodegradation of the barriers. Moreover, the incorporation of metallic-oxide particles to the surface of these membranes may enhance their osteoinductive capacity. Therefore, the aim of this paper was to evaluate the reliability of a new PLGA membrane after being treated with oxygen plasma (PO2) plus silicon dioxide (SiO2) layers for guided bone regeneration (GBR) processes.

MATERIAL AND METHODS

Circumferential bone defects (diameter: 11 mm; depth: 3 mm) were created on the top of eight experimentation rabbits' skulls and were randomly covered with: (1) PLGA membranes (control), or (2) PLGA/PO2/SiO2 barriers. The animals were euthanized two months afterwards. A micromorphologic study was then performed using ROI (region of interest) colour analysis. Percentage of new bone formation, length of mineralised bone, concentration of osteoclasts, and intensity of ostheosynthetic activity were assessed and compared with those of the original bone tissue. The Kruskal-Wallis test was applied for between-group com Asignificance level of a=0.05 was considered.

RESULTS

The PLGA/PO2/SiO2 membranes achieved the significantly highest new bone formation, length of mineralised bone, concentration of osteoclasts, and ostheosynthetic activity. The percentage of regenerated bone supplied by the new membranes was similar to that of the original bone tissue. Unlike what happened in the control group, PLGA/PO2/SiO2 membranes predominantly showed bone layers in advanced stages of formation.

CONCLUSIONS

The addition of SiO2 layers to PLGA membranes pre-treated with PO2 improves their bone-regeneration potential. Although further research is necessary to corroborate these conclusions in humans, this could be a promising strategy to rebuild the bone architecture prior to rehabilitate edentulous areas.

In vivo comparative model of oxygen plasma and nanocomposite particles on PLGA membranes for guided bone regeneration processes to be applied in pre-prosthetic surgery: a pilot study

OBJECTIVES

To evaluate the bone regeneration potential of a new membrane fabricated with polyglycolide acid (PLGA) after being treated with oxygen plasma (PO2), and/or being functionalized with silicon dioxide (SiO2) or titanium dioxide (TiO2) nanoparticles.

METHODS

Bone defects (5 mm 3 mm) were produced on the top of 3 experimentation rabbits’ skulls and were covered with variously modified PLGA scaffolds. After the animals were sacrificed, neoformed bone (%), mineralized bone (mm), bone resorption (%), osteoclasts/mm2, and intensity of osteosynthetic activity, were assessed under microscope.

RESULTS

The following groups were formed depending on the type of membrane: PLGA (control); PLGA/PO2; PLGA/SiO2; PLGA/TiO2; PLGA/PO2/SiO2; and PLGA/PO2/TiO2. The histological sections showed bone layers in advanced stages of formation. The highest percentages of neoformed bone corresponded to PLGA/PO2/SiO2 membranes (59.07%; p = 0.31) followed by PLGA/PO2 barriers (50.27%). The controls showed the lowest mineralization (13.89 mm; p = 0.24). PLGA/TiO2 scaffolds exhibited the least bone resorption (4.45%; p = 0.77) and osteoclasts/ mm2 (1.58; p = 0.86). PLGA/SiO2 and PLGA/TiO2 membranes stimulated the maximum osteosynthetic activity.

CONCLUSIONS

The treatment of PLGA barriers with PO2 increased bone regeneration in rabbits. When comparing the effect of PO2/SiO2 and PO2/TiO2, higher percentages of neoformed bone were encountered after silicon-dioxide coating.

CLINICAL SIGNIFICANCE

The incorporation of SiO2 nanoparticles onto PO2-treated PLGA membranes was the most promising technique out of those investigated to promote bone formation in rabbits. The addition of SiO2 or TiO2 layers to PLGA substrates may stimulate the osteosynthetic activity, which might be useful to restore bone dimensions in preparation for naturally appearing dental prostheses.

A principal components analysis: how pneumatization and edentulism contribute to maxillary atrophy

OBJECTIVE

The aim of this retrospective cohort study was to investigate the role of sinus pneumatization and residual ridge resorption in maxillary bone loss in 400 computed tomography (CT) scans.

MATERIALS AND METHODS

In 200 dentate and 200 edentulous patients, both sinuses were analysed using CT scans. The image analysis sequence consisted of manual placement of 24 reference points, followed by automated segmentation and final manual refinement. Finally, a principal components analysis was performed.

RESULTS

A total of 788 sinuses were included into the analysis. The edentulous group (98 female: 67.77 ± 11.28 years, 99 male: 65.22 ± 9.87) was significantly older than the group with teeth (99 female: 46.89 ± 16.77 years, 96 male: 49.74 ± 16.2). Female and male patients did not differ regarding age. The alveolar height differed significantly between the groups (edentulous: 7.1 ± 4.3 mm, with teeth: 9.7 ± 4.1 mm), but not between gender (female: 8.3 ± 4.4 mm, male: 8.5 ± 4.4 mm). Principal components analysis was able to explain 90% of the variation in sinus morphology.

CONCLUSIONS

Prolonged edentulism in the maxillary molar region leads to centripetal and to minor degrees centrifugal ridge resorption. Minor pneumatization occurs in the sinus walls, but the sinus depth underlies the anatomical variation independent of dentition.

'Pre-prosthetic use of poly(lactic-co-glycolic acid) membranes treated with oxygen plasma and TiO2 nanocomposite particles for guided bone regeneration processes'

OBJECTIVES

Guided bone regeneration (GBR) processes are frequently necessary to achieve appropriate substrates before the restoration of edentulous areas. This study aimed to evaluate the bone regeneration reliability of a new poly-lactic-co-glycolic acid (PLGA) membrane after treatment with oxygen plasma (PO2) and titanium dioxide (TiO2) composite nanoparticles.

METHODS

Circumferential bone defects (diameter: 10mm; depth: 3mm) were created on the parietal bones of eight experimentation rabbits and were randomly covered with control membranes (Group 1: PLGA) or experimental membranes (Group 2: PLGA/PO2/TiO2). The animals were euthanized two months afterwards, and a morphologic study was then performed under microscope using ROI (region of interest) colour analysis. Percentage of new bone formation, length of mineralised bone formed in the grown defects, concentration of osteoclasts, and intensity of osteosynthetic activity were assessed. Comparisons among the groups and with the original bone tissue were made using the Kruskal-Wallis test. The level of significance was set in advance at a=0.05.

RESULTS

The experimental group recorded higher values for new bone formation, mineralised bone length, and osteoclast concentration; this group also registered the highest osteosynthetic activity. Bone layers in advanced formation stages and low proportions of immature tissue were observed in the study group.

CONCLUSIONS

The functionalised membranes showed the best efficacy for bone regeneration.

CLINICAL SIGNIFICANCE

The addition of TiO2 nanoparticles onto PLGA/PO2 membranes for GBR processes may be a promising technique to restore bone dimensions and anatomic contours as a prerequisite to well-supported and natural-appearing prosthetic rehabilitations.

The Role of Osteocytes in Age-Related Bone Loss

The decrease in bone mass and strength during aging has multiple causes. Osteocytes are long-lived cells within the bone matrix that perform a variety of functions, including the control of bone remodeling. Because of their longevity, osteocytes are more likely than osteoclasts or osteoblasts to accumulate molecular damage over time. Osteocytes utilize quality-control pathways like autophagy to remove damaged organelles and macromolecules, and thereby maintain function. When the damage is excessive, cell death pathways such as apoptosis minimize the impact of potential osteocyte dysfunction on the skeleton. The goal of this review is to discuss how dysregulation of these pathways in osteocytes may contribute to the decline in bone mass and strength with age.

Variation of bone layer thicknesses and trabecular volume fraction in the adult male human calvarium

The human calvarium is a sandwich structure with two dense layers of cortical bone separated by porous cancellous bone. The variation of the three dimensional geometry, including the layer thicknesses and the volume fraction of the cancellous layer across the population, is unavailable in the current literature. This information is of particular importance to mathematical models of the human head used to simulate mechanical response. Although the target geometry for these models is the median geometry of the population, the best attempt so far has been the scaling of a unique geometry based on a few median anthropometric measurements of the head. However, this method does not represent the median geometry. This paper reports the average three dimensional geometry of the calvarium from X-ray computed tomography (CT) imaging and layer thickness and trabecular volume fraction from micro CT (μCT) imaging of ten adult male post-mortem human surrogates (PMHS). Skull bone samples have been obtained and μCT imaging was done at a resolution of 30 μm. Monte Carlo simulation was done to estimate the variance in these measurements due to the uncertainty in image segmentation. The layer thickness data has been averaged over areas of 5mm(2). The outer cortical layer was found to be significantly (p < 0.01; Student's t test) thicker than the inner layer (median of thickness ratio 1.68). Although there was significant location to location difference in all the layer thicknesses and volume fraction measurements, there was no trend. Average distribution and the variance of these metrics on the calvarium have been shown. The findings have been reported as colormaps on a 2D projection of the cranial vault.

Morphometric characteristics of cortical and trabecular bone in atrophic edentulous mandibles

OBJECTIVES

Adaptations of the alveolar ridge after tooth loss have been well described. However, studies on the morphometric characteristics of cortical bone are rare; hence, this study of human atrophic edentulous mandibles was undertaken.

MATERIAL AND METHODS

Total cortical area, porosity, and thickness, and the percentage of cortical area in the complete mandibular area as well as in an area (height, 10 mm) starting at the most caudal point of the trabecular compartment and extending in the coronal direction were determined in 185 thin ground sections of edentulous mandibles (incisor region, 49; premolar region, 76; molar region, 60; 95 from females and 90 from males; mean age, 78.2 years, SD ± 7.8 years; Caucasian donors; cause of death: cardiovascular disease). Further, mandibular height and width and degree of residual ridge resorption (RRR) were recorded.

RESULTS

The percentage of cortical area in the complete mandibular area increased with increasing RRR. Yet, evaluation of the 10-mm caudal portion corresponding to the basal part of the mandibular body did not confirm these changes in cortical bone. Cortical porosity and thickness decreased from the mesial to the distal region. Cortical porosity was unaffected by RRR, while cortical thickness increased, mainly at lingual aspects.

CONCLUSIONS

In conclusion, cortical bone remained stable in different degrees of RRR except for some modulations in the lingual aspects. Changes in the relative composition between cortical and trabecular bone are due to loss of height and total area, mainly at expense of trabecular bone area, but not to adaptations of the cortical bone.

An estimation of the number of cells in the human body

BACKGROUND

All living organisms are made of individual and identifiable cells, whose number, together with their size and type, ultimately defines the structure and functions of an organism. While the total cell number of lower organisms is often known, it has not yet been defined in higher organisms. In particular, the reported total cell number of a human being ranges between 10(12) and 10(16) and it is widely mentioned without a proper reference.

AIM

To study and discuss the theoretical issue of the total number of cells that compose the standard human adult organism.

SUBJECTS AND METHODS

A systematic calculation of the total cell number of the whole human body and of the single organs was carried out using bibliographical and/or mathematical approaches.

RESULTS

A current estimation of human total cell number calculated for a variety of organs and cell types is presented. These partial data correspond to a total number of 3.72 × 10(13).

CONCLUSIONS

Knowing the total cell number of the human body as well as of individual organs is important from a cultural, biological, medical and comparative modelling point of view. The presented cell count could be a starting point for a common effort to complete the total calculation.

Midterm clinical and tomodensitometric evaluation of cortical bone repair using bone substitute and allogenic membrane protection in the areas of cortical bone harvesting in the parietal cranium in preimplant reconstructive surgery

The authors present their clinical and computed tomographic findings in a series of 13 cases of monocortical bone harvesting, in the setting of preimplant reconstructive surgery, with the harvest sites filled with granular bovine bone substitute, which had an additional coverage using a collagen membrane. These patients were compared with a control group of 6 patients who had not received any cranial bone reconstruction during the initial harvesting. Clinical and computed tomographic evaluations of the repaired parietal cortical bone harvest sites were performed to study the contour of the cortical bone harvest sites in relation to the surrounding soft tissue. Among the 13, there were no clinical cases of infection or allergic reaction. Midterm results of the parietal cortical bone reconstruction using granular bone substitute with overlying protective biodegradable membrane show that this method of reconstruction of the cranium after cranial bone harvesting resulted in significantly improved clinical outcomes.

Variation in osteocyte lacunar morphology and density in the human femur--a synchrotron radiation micro-CT study

In recent years there has been growing interest in the spatial properties of osteocytes (including density and morphology) and how these potentially relate to adaptation, disease and aging. This interest has, in part, arisen from the availability of increasingly high-resolution 3D imaging modalities such as synchrotron radiation (SR) micro-CT. As resolution increases, field of view generally decreases. Thus, while increasingly detailed spatial information is obtained, it is unclear how representative this information is of the skeleton or even the isolated bone. The purpose of this research was to describe the variation in osteocyte lacunar density, morphology and orientation within the femur from a healthy young male human. Multiple anterior, posterior, medial and lateral blocks (2 mm × 2 mm) were prepared from the proximal femoral shaft and SR micro-CT imaged at the Advanced Photon Source. Average lacunar densities (± standard deviation) from the anterior, posterior, medial and lateral regions were 27,169 ± 1935, 26,3643 ± 1262, 37,521 ± 6416 and 33,972 ± 2513 lacunae per mm(3) of bone tissue, respectively. These values were significantly different between the medial and both the anterior and posterior regions (p<0.05). The density of the combined anterior and posterior regions was also significantly lower (p=0.001) than the density of the combined medial and lateral regions. Although no difference was found in predominant orientation, shape differences were found; with the combined anterior and posterior regions having more elongated (p=0.004) and flattened (p=0.045) lacunae, than those of the medial and lateral regions. This study reveals variation in osteocyte lacunar density and morphology within the cross-section of a single bone and that this variation can be considerable (up to 30% difference in density between regions). The underlying functional significance of the observed variation in lacunar density likely relates to localized variations in loading conditions as the pattern corresponds well with mechanical axes. Lower density and more elongate shapes being associated with the antero-posterior oriented neutral axis. Our findings demonstrate that the functional and pathological interpretations that are increasingly being drawn from high resolution imaging of osteocyte lacunae need to be better situated within the broader context of normal variation, including that which occurs even within a single skeletal element.

Microarchitectural changes in the aging skeleton

The age-related reduction in bone mass is disproportionally related to skeletal weakening, suggesting that microarchitectural changes are also important determinants of bone quality. The study of cortical and trabecular microstructure, which for many years was mainly based on two-dimensional histologic and scanning electron microscopy imaging, gained a tremendous momentum in the last decade and a half, due to the introduction of microcomputed tomography (μCT). This technology provides highly accurate qualitative and quantitative analyses based on three-dimensional images at micrometer resolution, which combined with finite elemental analysis predicts the biomechanical implications of microstructural changes. Global μCT analyses of trabecular bone have repeatedly suggested that the main age-related change in this compartment is a decrease in trabecular number with unaltered, or even increased, trabecular thickness. However, we show here that this may result from a bias whereby thick trabeculae near the cortex and the early clearance of thin struts mask authentic trabecular thinning. The main cortical age-related change is increased porosity due to negatively balanced osteonal remodeling and expansion of Haversian canals, which occasionally merge with endosteal and periosteal resorption bays, thus leading to rapid cortical thinning and cortical weakening. The recent emergence of CT systems with submicrometer resolution provides novel information on the age-related decrease in osteocyte lacunar density and related micropetrosis, the result of lacunar hypermineralization. Last but not least, the use of the submicrometer CT systems confirmed the occurrence of microcracks in the skeletal mineralized matrix and vastly advanced their morphologic characterization and mode of initiation and propagation.