Poly(vinyl alcohol)-graft-poly(lactide-co-glycolide) nanoparticles for local delivery of paclitaxel for restenosis treatment

Research progress on the therapeutic effects of nanoparticles loaded with drugs against atherosclerosis

Presently, there are many drugs for the treatment of atherosclerosis (AS), among which lipid-lowering, anti-inflammatory, and antiproliferative drugs have been the most studied. These drugs have been shown to have inhibitory effects on the development of AS. Nanoparticles are suitable for AS treatment research due to their fine-tunable and modifiable properties. Compared with drug monotherapy, experimental results have proven that the effects of nanoparticle-encapsulated drugs are significantly enhanced. In addition to nanoparticles containing a single drug, there have been many studies on collaborative drug treatment, collaborative physical treatment (ultrasound, near-infrared lasers, and external magnetic field), and the integration of diagnosis and treatment. This review provides an introduction to the therapeutic effects of nanoparticles loaded with drugs to treat AS and summarizes their advantages, including increased targeting ability, sustained drug release, improved bioavailability, reduced toxicity, and inhibition of plaque and vascular stenosis.

A comprehensive review on recent advances in preparation, physicochemical characterization, and bioengineering applications of biopolymers

Biopolymers are mainly the polymers which are created or obtained from living creatures such as plants and bacteria rather than petroleum, which has traditionally been the source of polymers. Biopolymers are chain-like molecules composed of repeated chemical blocks derived from renewable resources that may decay in the environment. The usage of biomaterials is becoming more popular as a means of reducing the use of non-renewable resources and reducing environmental pollution produced by synthetic materials. Biopolymers' biodegradability and non-toxic nature help to maintain our environment clean and safe. This study discusses how to improve the mechanical and physical characteristics of biopolymers, particularly in the realm of bioengineering. The paper begins with a fundamental introduction and progresses to a detailed examination of synthesis and a unique investigation of several recent focused biopolymers with mechanical, physical, and biological characterization. Biopolymers' unique non-toxicity, biodegradability, biocompatibility, and eco-friendly features are boosting their applications, especially in bioengineering fields, including agriculture, pharmaceuticals, biomedical, ecological, industrial, aqua treatment, and food packaging, among others, at the end of this paper. The purpose of this paper is to provide an overview of the relevance of biopolymers in smart and novel bioengineering applications.

Graphical abstract

The Graphical abstract represents the biological sources and applications of biopolymers. Plants, bacteria, animals, agriculture wastes, and fossils are all biological sources for biopolymers, which are chemically manufactured from biological monomer units, including sugars, amino acids, natural fats and oils, and nucleotides. Biopolymer modification (chemical or physical) is recognized as a crucial technique for modifying physical and chemical characteristics, resulting in novel materials with improved capabilities and allowing them to be explored to their full potential in many fields of application such as tissue engineering, drug delivery, agriculture, biomedical, food industries, and industrial applications.

Nanoparticles in the diagnosis and treatment of vascular aging and related diseases

Aging-induced alternations of vasculature structures, phenotypes, and functions are key in the occurrence and development of vascular aging-related diseases. Multiple molecular and cellular events, such as oxidative stress, mitochondrial dysfunction, vascular inflammation, cellular senescence, and epigenetic alterations are highly associated with vascular aging physiopathology. Advances in nanoparticles and nanotechnology, which can realize sensitive diagnostic modalities, efficient medical treatment, and better prognosis as well as less adverse effects on non-target tissues, provide an amazing window in the field of vascular aging and related diseases. Throughout this review, we presented current knowledge on classification of nanoparticles and the relationship between vascular aging and related diseases. Importantly, we comprehensively summarized the potential of nanoparticles-based diagnostic and therapeutic techniques in vascular aging and related diseases, including cardiovascular diseases, cerebrovascular diseases, as well as chronic kidney diseases, and discussed the advantages and limitations of their clinical applications.

Formoterol PLGA-PEG Nanoparticles Induce Mitochondrial Biogenesis in Renal Proximal Tubules

Formoterol is a long-acting β₂ agonist (LABA). Agonism of the β₂-adrenergic receptor by formoterol is known to stimulate mitochondrial biogenesis (MB) in renal proximal tubules and recover kidney function. However, formoterol has a number of cardiovascular side effects that limits its usage. The goal of this study was to design and develop an intravenous biodegradable and biocompatible polymeric nanoparticle delivery system that targets formoterol to the kidney. Poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) nanoparticles containing encapsulated formoterol were synthesized by a modified single-emulsion solvent evaporation technique resulting in nanoparticles with a median hydrodynamic diameter of 442 + 17 nm. Using primary cell cultures of rabbit renal proximal tubular cells (RPTCs), free formoterol, encapsulated formoterol polymeric nanoparticles, and drug-free polymeric nanoparticles were biocompatible and not cytotoxic over a wide concentration range. In healthy male mice, polymeric nanoparticles were shown to localize in tubules of the renal cortex and improved the renal localization of encapsulated formoterol compared to the free formoterol. At a lower total formoterol dose, the nanoparticle localization resulted in increased expression of peroxisome proliferator-activated receptor-γ coactivator-1α (PGC-1α), the master regulator of MB, and increased electron transport chain proteins, markers of MB. This was confirmed by direct visual quantification of mitochondria and occurred with both free formoterol and the encapsulated formoterol polymeric nanoparticles. At the same time, localization of nanoparticles to the kidneys resulted in reduced induction of MB markers in the heart. These new nanoparticles effectively target formoterol to the kidney and successfully produce MB in the kidney.

Non-Ionic Surfactants for Stabilization of Polymeric Nanoparticles for Biomedical Uses

Surfactants are essential in the manufacture of polymeric nanoparticles by emulsion formation methods and to preserve the stability of carriers in liquid media. The deposition of non-ionic surfactants at the interface allows a considerable reduction of the globule of the emulsion with high biocompatibility and the possibility of oscillating the final sizes in a wide nanometric range. Therefore, this review presents an analysis of the three principal non-ionic surfactants utilized in the manufacture of polymeric nanoparticles; polysorbates, poly(vinyl alcohol), and poloxamers. We included a section on general properties and uses and a comprehensive compilation of formulations with each principal non-ionic surfactant. Then, we highlight a section on the interaction of non-ionic surfactants with biological barriers to emphasize that the function of surfactants is not limited to stabilizing the dispersion of nanoparticles and has a broad impact on pharmacokinetics. Finally, the last section corresponds to a recommendation in the experimental approach for choosing a surfactant applying the systematic methodology of Quality by Design.

Automated and Continuous Production of Polymeric Nanoparticles

Polymeric nanoparticles (NPs) are increasingly used as therapeutics, diagnostics, and building blocks in (bio)materials science. Current barriers to translation are limited control over NP physicochemical properties and robust scale-up of their production. Flow-based devices have emerged for controlled production of polymeric NPs, both for rapid formulation screening (~μg min-1) and on-scale production (~mg min-1). While flow-based devices have improved NP production compared to traditional batch processes, automated processes are desired for robust NP production at scale. Therefore, we engineered an automated coaxial jet mixer (CJM), which controlled the mixing of an organic stream containing block copolymer and an aqueous stream, for the continuous nanoprecipitation of polymeric NPs. The CJM was operated stably under computer control for up to 24 h and automated control over the flow conditions tuned poly(ethylene glycol)-block-polylactide (PEG5K -b-PLA20K ) NP size between ≈56 nm and ≈79 nm. In addition, the automated CJM enabled production of NPs of similar size (D h ≈ 50 nm) from chemically diverse block copolymers, PEG5K -b-PLA20K , PEG-block-poly(lactide-co-glycolide) (PEG5K -b-PLGA20K ), and PEG-block-polycaprolactone (PEG5K -b-PCL20K ), by tuning the flow conditions for each block copolymer. Further, the automated CJM was used to produce model nanotherapeutics in a reproducible manner without user intervention. Finally, NPs produced with the automated CJM were used to scale the formation of injectable polymer-nanoparticle (PNP) hydrogels, without modifying the mechanical properties of the PNP gel. In conclusion, the automated CJM enabled stable, tunable, and continuous production of polymeric NPs, which are needed for the scale-up and translation of this important class of biomaterials.

Biomaterials of PVA and PVP in medical and pharmaceutical applications: Perspectives and challenges

Poly(vinyl alcohol) (PVA) has attracted considerable research interest and is recognized among the largest volume of synthetic polymers that have been produced worldwide for almost one century. This is due to its exceptional properties which dictated its extensive use in a wide variety of applications, especially in medical and pharmaceutical fields. However, studies revealed that PVA-based biomaterials present some limitations that can restrict their use or performances. To overcome these limitations, various methods have been reported, among which blending with poly(vinylpyrrolidone) (PVP) showed promising results. Thus, our aim was to offer a systematic overview on the current state concerning the preparation, properties and various applications of biomaterials based on synergistic effect of mixtures between PVA and PVP. Future trends towards where the biomaterials research is headed were discussed, showing the promising opportunities that PVA and PVP can offer.

An LTB-entrapped protein in PLGA nanoparticles preserves against enterotoxin of enterotoxigenic Escherichia coli

Objective(s):

Enterotoxigenic Escherichia coli (ETEC) is known as the most common bacterial causes of diarrheal diseases related to morbidity and mortality. Heat-labile enterotoxin (LT) is a part of major virulence factors in ETEC pathogenesis. Antigen entrapment into nanoparticles (NPs) can protect them and enhance their immunogenicity.

Materials and Methods:

In the present study, recombinant LTB protein was expressed in E. coli BL21 (DE3) and purified by an Ni-NTA agarose column. The protein was entrapped in PLGA polymer by the double emulsion method. NPs were characterized physicochemically and the protein release from the NPs was evaluated. ELISA assay was performed for investigation of raised antibody against the recombinant protein in mice. The anti-toxicity and anti-adherence attributes of the immune sera against ETEC were also evaluated.

Results:

It showed the successful cloning of a 313 bp DNA fragment encoding LTB protein in the pET28a vector. Over-expression in BL21 (DE3) led to the formation of corresponding 15.5 kDa protein bands in the SDS-PAGE gel. Western blotting by using anti-CTX confirmed the purified LTB. Protein-entrapped NPs had a spherical shape with the size of 238 nm mean diameter and 85% entrapment efficiency. Immunological analyses showed the production of a high titer of specific IgG antibody in immunized animals. The neutralizing antibody in the sera of immunized animals was approved by GM1 binding and Ileal loop assays.

Conclusion:

The results indicate the efficacy of the entrapped LTB protein as an effective immunogen which induces the humoral responses.

Coating Matters: Review on Colloidal Stability of Nanoparticles with Biocompatible Coatings in Biological Media, Living Cells and Organisms

Within the last two decades, the field of nanomedicine has not developed as successfully as has widely been hoped for. The main reason for this is the immense complexity of the biological systems, including the physico-chemical properties of the biological fluids as well as the biochemistry and the physiology of living systems. The nanoparticles' physicochemical properties are also highly important. These differ profoundly from those of freshly synthesized particles when applied in biological/living systems as recent research in this field reveals. The physico-chemical properties of nanoparticles are predefined by their structural and functional design (core and coating material) and are highly affected by their interaction with the environment (temperature, pH, salt, proteins, cells). Since the coating material is the first part of the particle to come in contact with the environment, it does not only provide biocompatibility, but also defines the behavior (e.g. colloidal stability) and the fate (degradation, excretion, accumulation) of nanoparticles in the living systems. Hence, the coating matters, particularly for a nanoparticle system for biomedical applications, which has to fulfill its task in the complex environment of biological fluids, cells and organisms. In this review, we evaluate the performance of different coating materials for nanoparticles concerning their ability to provide colloidal stability in biological media and living systems.

Smart materials on the way to theranostic nanorobots: Molecular machines and nanomotors, advanced biosensors, and intelligent vehicles for drug delivery

BACKGROUND

Theranostics, a fusion of two key parts of modern medicine - diagnostics and therapy of the organism's disorders, promises to bring the efficacy of medical treatment to a fundamentally new level and to become the basis of personalized medicine. Extrapolating today's progress in the field of smart materials to the long-run prospect, we can imagine future intelligent agents capable of performing complex analysis of different physiological factors inside the living organism and implementing a built-in program thereby triggering a series of therapeutic actions. These agents, by analogy with their macroscopic counterparts, can be called nanorobots. It is quite obscure what these devices are going to look like but they will be more or less based on today's achievements in nanobiotechnology.

SCOPE OF REVIEW

The present Review is an attempt to systematize highly diverse nanomaterials, which may potentially serve as modules for theranostic nanorobotics, e.g., nanomotors, sensing units, and payload carriers.

MAJOR CONCLUSIONS

Biocomputing-based sensing, externally actuated or chemically "fueled" autonomous movement, swarm inter-agent communication behavior are just a few inspiring examples that nanobiotechnology can offer today for construction of truly intelligent drug delivery systems.

GENERAL SIGNIFICANCE

The progress of smart nanomaterials toward fully autonomous drug delivery nanorobots is an exciting prospect for disease treatment. Synergistic combination of the available approaches and their further development may produce intelligent drugs of unmatched functionality.

Heparin-functionalized Pluronic nanoparticles to enhance the antitumor efficacy of sorafenib in gastric cancers

In this study, chitosan/heparin immobilized delivery system was developed for the delivery of sorafenib in gastric cancers. The SRF NP was nanosized with spherical outfit and present in the amorphous form. The SRF NP exhibited a sustained release of drug at pH 7.4 conditions and enhanced drug released at pH 5.5 conditions. Flow cytometer analysis showed that cellular uptake of NP increased two-fold after 4h of incubation compared to 1h incubation. The SRF NP showed superior anticancer effect compared to that of free SRF in BGC-823 cancer cells. SRF NP induced a remarkable apoptosis of cancer cells consistent with the cytotoxicity assay. Approximately, ∼ 50% of cell fractions were observed in early apoptosis phase with ∼ 15% of cells in the late apoptosis stage. Consistently, SRF NP exhibited a strong band for caspase-3 and P-53 than compared to free SRF in MGC-823 cancer cells. Importantly, SRF NP showed superior anticancer effect in xenograft tumor model making it a promising delivery vehicle in the treatment of gastric cancers.

Nanomedicine for the molecular diagnosis of cardiovascular pathologies

Predicting acute clinical events caused by atherosclerotic plaque rupture remains a clinical challenge. Anatomic mapping of the vascular tree provided by standard imaging technologies is not always sufficient for a robust diagnosis. Yet biological mechanisms leading to unstable plaques have been identified and corresponding biomarkers have been described. Nanosystems charged with contrast agents and targeted towards these specific biomarkers have been developed for several types of imaging modalities. The first systems that have reached the clinic are ultrasmall superparamagnetic iron oxides for Magnetic Resonance Imaging. Their potential relies on their passive accumulation by predominant physiological mechanisms in rupture-prone plaques. Active targeting strategies are under development to improve their specificity and set up other types of nanoplatforms. Preclinical results show a huge potential of nanomedicine for cardiovascular diagnosis, as long as the safety of these nanosystems in the body is studied in depth.

Long circulating micelles of an amphiphilic random copolymer bearing cell outer membrane phosphorylcholine zwitterions

Polymeric micelles with cell outer membrane mimetic structure were prepared in water from amphiphilic random copolymers bearing both the hydrophilic phosphorylcholine zwitterions and hydrophobic octadecyl side chains of cell outer membrane. The polymeric micelles showed sizes ranging from 80 nm to 120 nm in hydrodynamic diameter and zeta-potentials from -6.4 mV to -2.4 mV by dynamic light scattering measurements. The micelles loaded with 6-coumarin as a fluorescence probe were stable to investigate their blood circulation and biodistribution. The in vitro phagocytosis results using murine peritoneal macrophages showed 10-fold reduction compared with a reference micelle. The in vivo blood circulation half-life of the polymeric micelles following intravenous administration in New Zealand Rabbits was increased from 0.55 h to 90.5h. More interestingly, tissue distribution results showed that the concentration of the micelles in the kidney is 4-fold higher than that in the liver and other organs 48 h after administration. The results of this work show great promise for designing more effective stealth drug carriers that can minimize reticuloendothelial system clearance and circulate for long time to reach target by using simple cell membrane mimetic random copolymer micelles.

Innovative slow-release organic carbon-source material for groundwater in situ denitrification

Slow-release organic carbon-source (SOC) material, a new kind of electron donor for in situ groundwater denitrification, was prepared and evaluated in this study. With starch as a biologically utilized carbon source and polyvinyl alcohol (PVA) as a frame, this material performed controllable carbon release rates and demonstrated stable behaviour during the simulated denitrification process. Raman spectrum analysis showed that the PVA skeleton formed cross-linking network structures for hydrogen-bonded water molecules reset in low temperatures, and the starchy molecules filled in the interspace of the skeleton to form a two-phase interlocking/disperse phase structure. In a static system, carbon release processes followed the Fickian law with (1.294-6.560)×10(-3) mg g(-1) s(-1/2) as the release coefficient. Under domestication and in situ groundwater simulation conditions, SOC material played a favourable role during denitrification, with 1.049±0.165 as an average carbon-nitrogen ratio. The denitrification process followed the law of zero-order kinetics, while the dynamics parameter kN was 0.563-8.753 gN m(-3) d(-1). Generally, SOC material was suggested to be a potential carbon source (electron donor) suitable for in situ groundwater denitrification.

Structure and mass transportation model of slow-release organic carbon-source material for groundwater in situ denitrification

Based on the theories of organic polymer and chemical kinetics, the structure and mass transportation model of slow-release organic carbon-source (SOC) material was developed in this study to reveal and predict the carbon release mechanisms of polymer carbon source, which was feasible for in situ denitrification in nitrate-contaminated groundwater. Composed of polyvinyl alcohol (PVA) and starch, the SOC material formed the interlocking/disperse-phase structure. PVA performed as continuous phase and skeleton, whereas the starch or cellulose behaved as release component. Carbon release process was identified in two stages: solid-phase (inner) and interface (gel layer) diffusion. Solid-phase diffusion was affected by material porous medium parameters, for example, distance between the crosslinking points and starch free energy. The interface diffusion depended mostly on the groundwater dynamics and interface energy distribution. The interface diffusion was found as the limiting step of carbon release process, and the carbon release coefficient corresponded to kD,I as static coefficient and kC,I as dynamic coefficient. As the key indicator to evaluate carbon release capacity, kD,I and kC,I represented appropriate boundary conditions and interface properties. Sensitivity analysis showed that the key parameters of the carbon release model were the distance between the crosslinking points and the free energy of polymer, influenced by regulation of preparation technique, raw material composition and additive dosage.

Toxicity assessment and modelling of Moringa oleifera seeds in water purification by whole cell bioreporter

Moringa oleifera has been used as a coagulation reagent for drinking water purification, especially in developing countries such as Malawi. This research revealed the cytoxicity and genotoxicity of M. oleifera by Acinetobacter bioreporter. The results indicated that significant cytoxicity effects were observed when the powdered M. oleifera seeds concentration is from 1 to 50 mg/L. Through direct contact, ethanolic-water extraction and hexane extraction, the toxic effects of hydrophobic and hydrophilic components in M. oleifera seeds were distinguished. It suggested that the hydrophobic lipids contributed to the dominant cytoxicity, consequently resulting in the dominant genotoxicity in the water-soluble fraction due to limited dissolution when the M. oleifera seeds granule concentration was from 10 to 1000 mg/L. Based on cytoxicity and genotoxicity model, the LC50 and LC90 of M. oleifera seeds were 8.5 mg/L and 300 mg/L respectively and their genotoxicity was equivalent to 8.3 mg mitomycin C per 1.0 g dry M. oleifera seed. The toxicity of M. oleifera has also remarkable synergistic effects, suggesting whole cell bioreporter as an appropriate and complementary tool to chemical analysis for environmental toxicity assessment.

Role of biomaterials in prevention of in-stent restenosis

Coronary balloon angioplasty and coronary stenting are the procedures used in healing coronary artery disease. However, injury of arteries during angioplasty and stenting causes cell stimulations in tissue. Cell movement and thrombosis lead to re-narrowing of widened vessel called restenosis. Several new types of carriers and technology have been developed to suppress and/or prevent restenosis. Authors review the polymeric materials featured in drug/gene carrier systems, nanovehicles, and stent coating materials against restenosis.

Synthesis, characterisation and drug release properties of microspheres of polystyrene with aliphatic polyester side-chains

A series of graft copolymers consisting of polystyrene backbone with biocompatible side chains based on (co)polymers of l-lactic acid and glycolic acid were synthesised by combination two controlled polymerisations, namely, nitroxide mediated radical polymerisation (NMRP) and ring opening polymerisation (ROP) with "Click" chemistry. The main goal of this work was to design new biodegradable microspheres using obtained graft copolymers for long-term sustained release of imatinib mesylate (IMM) as a model drug. The IMM loaded microspheres of the graft copolymers, polystyrene-g-poly(lactide-co-glycolide) (PS-g-PLLGA), polystyrene-g-poly(lactic acid) (PS-g-PLLA) and poly(lactic-coglycolic acid) (PLLGA) were then prepared by a modified water-in-oil-in-water (w1/o/w2) double emulsion/solvent evaporation technique. The optimised microspheres were characterised by particle size, encapsulation efficiency, and surface morphology also; their degradation and release properties were studied in vitro. The degradation studies of three different types of microspheres showed that the PS backbone of the graft copolymers slows down the degradation rate compared to PLLGA.

Electrophoretic coating of amphiphilic chitosan colloids on regulating cellular behaviour

In this communication, we report a facile nanotopographical control over a stainless steel surface via an electrophoretic deposition of colloidal amphiphilic chitosan for preferential growth, proliferation or migration of vascular smooth muscle cells (VSMCs) and human umbilical vein endothelial cells (HUVECs). Atomic force microscopy revealed that the colloidal surface exhibited a deposition time-dependent nanotopographical evolution, wherein two different nanotopographic textures indexed by 'kurtosis' (Rkur) value were easily designed, which were termed as 'sharp' (i.e. high peak-to-valley texture) surface and 'flat' (i.e. low peak-to-valley texture) surface. Cellular behaviour of VSMCs and HUVECs on both surfaces demonstrated topographically dependent morphogenesis, adherent responses and biochemical properties in comparison with bare stainless steel. The formation of a biofunctionalized surface upon a facile colloidal chitosan deposition envisions the potential application towards numerous biomedical devices, and this is especially promising for cardiovascular stents wherein a new surface with optimized texture can be designed and is expected to create an advantageous environment to stimulate HUVEC growth for improved healing performance.

Subcritical CO2 sintering of microspheres of different polymeric materials to fabricate scaffolds for tissue engineering

The aim of this study was to use CO2 at sub-critical pressures as a tool to sinter 3D, macroporous, microsphere-based scaffolds for bone and cartilage tissue engineering. Porous scaffolds composed of ~200 μm microspheres of either poly(lactic-co-glycolic acid) (PLGA) or polycaprolactone (PCL) were prepared using dense phase CO2 sintering, which were seeded with rat bone marrow mesenchymal stromal cells (rBMSCs), and exposed to either osteogenic (PLGA, PCL) or chondrogenic (PLGA) conditions for 6 weeks. Under osteogenic conditions, the PLGA constructs produced over an order of magnitude more calcium than the PCL constructs, whereas the PCL constructs had far superior mechanical and structural integrity (125 times stiffer than PLGA constructs) at week 6, along with twice the cell content of the PLGA constructs. Chondrogenic cell performance was limited in PLGA constructs, perhaps as a result of the polymer degradation rate being too high. The current study represents the first long-term culture of CO2-sintered microsphere-based scaffolds, and has established important thermodynamic differences in sintering between the selected formulations of PLGA and PCL, with the former requiring adjustment of pressure only, and the latter requiring the adjustment of both pressure and temperature. Based on more straightforward sintering conditions and more favorable cell performance, PLGA may be the material of choice for microspheres in a CO2 sintering application, although a different PLGA formulation with the encapsulation of growth factors, extracellular matrix-derived nanoparticles, and/or buffers in the microspheres may be advantageous for achieving a more superior cell performance than observed here.

Self-assembled Tat nanofibers as effective drug carrier and transporter

Cell penetrating peptides (CPPs) have been extensively explored as molecular vectors through covalent linkage to anticancer drugs to improve the drug's water solubility and to help overcome multidrug resistance. We report here the use of the Tat CPP as a molecular building unit to construct well-defined supramolecular nanofibers that can be utilized as a nanoscale vector to encapsulate the hydrophobic drug paclitaxel (PTX) (loading efficiency: 89.7 ± 5.0%) with a high loading capacity (6.8 ± 0.4%). Notably, our TEM imaging results reveal that nanofibers containing a higher PTX content tend to be more flexible than those with a lower PTX content. Fluorescence and confocal microscopy imaging show that the Tat nanofibers can effectively transport encapsulated molecules into the cells through an adsorptive-mediated endocytosis pathway. Cytotoxicity experiments and flow cytometry measurements demonstrate that PTX loaded in the nanofibers exerts its cytotoxicity against cancer cells by arresting the cells at the G2/M phase, the same working mechanism as free PTX.

Multi-ligand poly(L-lactic-co-glycolic acid) nanoparticles inhibit activation of endothelial cells

Endothelial cell (EC) activation and inflammation is a key step in the initiation and progression of many cardiovascular diseases. Targeted delivery of therapeutic reagents to inflamed EC using nanoparticles is challenging as nanoparticles do not arrest on EC efficiently under high shear stress. In this study, we developed a novel polymeric platelet-mimicking nanoparticle for strong particle adhesion onto ECs and enhanced particle internalization by ECs. This nanoparticle was encapsulated with dexamethasone as the anti-inflammatory drug, and conjugated with polyethylene glycol, glycoprotein 1b, and trans-activating transcriptional peptide. The multi-ligand nanoparticle showed significantly greater adhesion on P-selectin, von Willebrand Factor, than the unmodified particles, and activated EC in vitro under both static and flow conditions. Treatment of injured rat carotid arteries with these multi-ligand nanoparticles suppressed neointimal stenosis more than unconjugated nanoparticles did. These results indicate that this novel multi-ligand nanoparticle is efficient to target inflamed EC and inhibit inflammation and subsequent stenosis.

Studies on stabilization mechanism and stealth effect of poloxamer 188 onto PLGA nanoparticles

In nanoparticulate engineering for drug delivery systems, poloxamers tri block copolymers are employed as adsorbing molecules to modify the aggregation state and impart stability to products. The aim was to prepare nanoparticles using poloxamer188 as stabiliser and investigate the mechanism of stabilisation of the prepared particles. Nanoparticles were prepared by solvent diffusion method with poloxamer 188 as stabiliser. Hydrodynamic thickness and zeta potential of the prepared nanoparticles were determined by photon correlation spectroscopy. To study the extent of adsorption of poloxamer onto the prepared nanoparticles, adsorption isotherms were constructed. The adsorbed amount of poloxamer 188 onto the particles was determined by depletion method. Macrophageal uptake study was performed to assess the uptake of the prepared nanoparticles using RAW 264.7 cell lines. Nanoparticles were prepared with slight increase in particle size and in absolute value of zeta potential compared to uncoated particles suggesting that this effect was due to adsorption of poloxamer 188. TEM studies and surface area analysis supported the results obtained from particle size analysis indicating preparation of particles with a thin layer of adsorbed poloxamer 188. Adsorption kinetics modeling suggested that at low concentrations (0.001-0.010 g/L), Langmuir monolayer equation fits quite well and at higher concentrations (above 0.010 g/L) multilayer adsorption of poloxamer 188 onto the prepared particles occurred. Thus the nanoparticles had multilayer of poloxamer 188 adsorbed onto the non uniform surface of PLGA. Results of macrophageal uptake and liver cell study exhibits adsorbed concentration dependent bypass of RES uptake of nanoparticles. Hence, results substantiate the application of adsorption isotherms for designing nanoparticles possessing potential to exhibit prolonged circulation when administered in vivo.

S/O-nanodispersion electrospun fiber mesh effective for sustained release of healthy plasmid DNA with the structural and functional integrity

Localized and sustained delivery of the therapeutic genes using a solid carrier matrix is a potential approach to develop highly curative treatments. Electrospun nanofiber mesh of biodegradable polymer has been applied extensively as a carrier for localized and sustained delivery of drugs, proteins, and DNA, but it remains difficult to release sufficient amounts of DNA while maintaining structural and functional integrity. To realize the stable sustained release of the healthy plasmid DNA (pDNA) from electrospun fiber mesh, a novel method was examined for loading pDNA into the fibers based on solid-in-oil (S/O) nanodispersion of pDNA in organic solvent for electrospinning polymer solution: S/O nanodispersion electrospinning. A prepared pDNA-loaded fiber mesh made of biodegradable polymer showed sustained release of pDNA without burst release. From luciferase activity-based in vitro transcription-translation assay, pDNA released from meshes of the S/O nanodispersion retained about 60% luciferase activity of control pDNA, whereas pDNA released from the meshes of simple mixing showed only about 5% activity, indicating that S/O nanodispersion electrospinning is effective for loading pDNA into electrospun fiber meshes while maintaining their healthy functions. Effectiveness of S/O nanodispersion electrospinning was verified for fabricating a sustained release carrier matrix for high molecular weight bioactives, including therapeutic genes.

Conformational entropy of a polymer chain grafted to rough surfaces

A polymer molecule (represented by a statistical chain) end-grafted to a topologically rough surface was studied by static MC simulations. A modified self-avoiding walk on a cubic lattice was used to model the polymer in an athermal solution. Different statistical models of surface roughness were applied. Conformational entropies of chains attached to uncorrelated Gaussian, Brownian, and fractional Brownian surfaces were calculated. Results were compared with the predictions of a simple analytical model of a macromolecule end-grafted to a fractal surface.

Figure

A review on comb-shaped amphiphilic polymers for hydrophobic drug solubilization

Comb-shaped amphiphilic polymers are rapidly emerging as an alternative approach to amphiphilic block copolymers for hydrophobic drug solubilization. These polymers consist of a homopolymer or copolymer backbone to which hydrophobic and hydrophilic pendant groups can be grafted resulting in a comb-like architecture. The hydrophobic pendants may consist of homopolymers, copolymers and other low-molecular weight hydrophobic structures. In this review, we focus on hydrophobically modified preformed homopolymers. Comb-shaped amphiphilic polymers possess reduced critical aggregation concentration values compared with traditional surfactant micelles indicating increased stability with decreased disruption experienced on dilution. They have been fabricated with diverse architectures and multifunctional properties such as site-specific targeting and external stimuli-responsive nature. The application of comb-shaped amphiphilic polymers is expanding; here we report on the progress achieved so far in hydrophobic drug solubilization for both intravenous and oral delivery.

Nanoparticle-based drug delivery: case studies for cancer and cardiovascular applications

Nanoparticles (NPs) comprised of nanoengineered complexes are providing new opportunities for enabling targeted delivery of a range of therapeutics and combinations. A range of functionalities can be included within a nanoparticle complex, including surface chemistry that allows attachment of cell-specific ligands for targeted delivery, surface coatings to increase circulation times for enhanced bioavailability, specific materials on the surface or in the nanoparticle core that enable storage of a therapeutic cargo until the target site is reached, and materials sensitive to local or remote actuation cues that allow controlled delivery of therapeutics to the target cells. However, despite the potential benefits of NPs as smart drug delivery and diagnostic systems, much research is still required to evaluate potential toxicity issues related to the chemical properties of NP materials, as well as their size and shape. The need to validate each NP for safety and efficacy with each therapeutic compound or combination of therapeutics is an enormous challenge, which forces industry to focus mainly on those nanoparticle materials where data on safety and efficacy already exists, i.e., predominantly polymer NPs. However, the enhanced functionality affordable by inclusion of metallic materials as part of nanoengineered particles provides a wealth of new opportunity for innovation and new, more effective, and safer therapeutics for applications such as cancer and cardiovascular diseases, which require selective targeting of the therapeutic to maximize effectiveness while avoiding adverse effects on non-target tissues.

Treatment of lung cancer via telomerase inhibition: self-assembled nanoplexes versus polymeric nanoparticles as vectors for 2'-O-Methyl-RNA

Antisense oligonucleotide, 2'-O-Methyl-RNA (OMR), is known as potent telomerase inhibitor for the treatment of lung cancer but limited by poor intracellular uptake. Chitosan-coated polymeric nanoparticles were compared to chitosan solution as non-viral vectors for OMR. The study investigated the role of chitosan properties and concentration in improving the efficiency of the nanocarriers in terms of loading, viability, cellular uptake, and telomerase inhibition in human lung cancer cell lines. Certain concentration of chitosan on nanoparticle surface is necessary to significantly increase the cellular uptake. However, excessive chitosan negatively affected the transfection efficiency. Self-assembled nanoplexes with chitosan polymer are preferentially adsorbed to the cell membrane rather than being internalized. Thus, polymeric nanoparticles proved to be superior to cationic polymers as carrier for antisense oligonucleotides. Charge cannot be considered the principle factor behind improved transfection. Uptake studies carried out on air-interface cell cultures to mimic in vivo conditions supported the results on normal cultures showing enhanced uptake of nanoplexes over naked oligonucleotides. OMR nanoplexes reduced telomerase activity by ∼50% in A549 cells concluding the potential of the system as a safe, non-invasive, and efficient treatment for lung carcinoma. These data are prerequisites for the ongoing studies on lung perfusion model and in vivo experiments.

In vivo PEG modification of vascular surfaces for targeted delivery

OBJECTIVE

Thrombosis and restenosis remain problematic for many intravascular procedures. Previously, it has been demonstrated that modifying an injured vascular surface with a protein-reactive polymer could block undesirable platelet deposition. As an added benefit, it would be advantageous if one could target therapeutics to the injured site. This study investigates a site-specific delivery system to target microspheres to vascular surfaces modified with a reactive polyethylene glycol tagged with biotin.

METHODS

Rabbit femoral arteries were injured with a 2F embolectomy catheter. Modification of the vascular surface was achieved using a channeled balloon catheter or small-diameter tube. Microspheres were injected intravenously through catheterization of the ear vein. Polymer modification on the injured surface and delivery of microspheres was quantified using epifluorescence microscopy at 0, 24, 48, and 72 hours.

RESULTS

Polymer modification of the vascular surface could be achieved using a channeled drug delivery catheter or small-diameter tube with similar results. Maximum polymer coverage occurred at 0 hours and decreased to 85% maximal at 24 hours, 72% at 48 hours, and 67% at 72 hours. The initial number of microspheres per mm(2) binding to modified, injured arteries was 304 versus 141 for the unmodified, damaged control (P < .01). At subsequent times, the number of adherent microspheres to modified, injured arteries decreased by 50%, 70%, and 84% at 24, 48, and 72 hours, respectively; while nonspecific binding to unmodified, injured arteries quickly decreased by 93%. Initial microsphere binding to modified, healthy arteries was 153 microspheres/mm(2) as opposed to 26 microspheres/mm(2) for the unmodified, healthy controls (P < .01).

CONCLUSIONS

Chemical modification of injured vessels following intravascular procedures can be readily accomplished in vivo to create a substrate for targeted delivery systems. As a proof of concept, targeted microspheres preferentially adhered to polymer-modified surfaces as opposed to injured, unmodified, or healthy vascular surfaces.

Nanotechnology for the treatment of coronary in stent restenosis: a clinical perspective

Coronary in stent restenosis remains a significant limitation to the long term efficacy of coronary artery stent placement. In this review the authors review the pathophysiology of coronary in stent restenosis, together with an overview of the current treatment modalities. The potential clinical utility of nanotechnology is also reviewed.The first human safety trial of systemic nanoparticle paclitaxel (nab-paclitaxel) for in stent restenosis (SNAPIST-I) is discussed. The results showed no significant adverse advents attributable to the nab-paclitaxel at 10 or 30 mg/m2, although moderate neutropenia, sensory neuropathy and mild to moderate reversible alopecia occurred at higher doses. No major adverse cardiac events were recorded at 2 months, whilst at 6 months, 4 target lesions required revascularisation. The investigators concluded therefore that systemic nab-paclitaxel was well tolerated at a dose of <70 mg/m2. To date however, no formal clinical evaluation has been reported as to the clinical utility of nab-paclitaxel, or any of the nano preparations discussed, for the suppression of coronary in stent restenosis.

Surfactant-free redispersible nanoparticles in fast-dissolving composite microcarriers for dry-powder inhalation

Spray-drying was investigated for the stabilization of surfactant-free nanoparticles as carriers for dry-powder inhalers. The microparticles rapidly dissolve after inhalation yielding dispersed nanoparticles. Nanoparticles were prepared by a solvent displacement technique avoiding any surfactants. Microcarriers were prepared by spray-drying nanoparticle suspensions with lactose, mannitol or α-cyclodextrin as stabilizers. Nanoparticle size and ζ-potential before and after spray-drying were analyzed with photon correlation spectroscopy and laser Doppler anemometry, respectively. Cell uptake into macrophages was studied using U 937 cells by confocal microscopy. Stabilization of nanoparticle suspensions by spray-drying with α-cyclodextrin yielded redispersible particles smaller than 200 nm. α-Cyclodextrin was a more efficient stabilizer than commonly used excipients. Microparticles with a mass median aerodynamic diameter of 4.3 μm showed properties suitable for dry-powder inhalation. The cell culture experiments with redispersed nanoparticles seem to suggest less interaction and uptake with macrophages compared to polymeric microparticles. In conclusion, nanoparticles can easily be transferred to dry-powders suitable for inhalation by spray-drying. This allows the pulmonary application of nanoparticles in high concentrations.