Development of a reservoir-type transdermal enantioselective-controlled delivery system for racemic propranolol using a molecularly imprinted polymer composite membrane

Molecularly imprinted polymer composite membranes: From synthesis to diverse applications

This review underscores the fundamentals of MIP-CMs and systematically summarizes their synthetic strategies and applications, and potential developments. MIP-CMs are widely acclaimed for their versatility, finding applications in separation, filtration, detection, and trace analysis, as well as serving as scaffolds in a range of analytical, biomedical and industrial contexts. Also characterized by extraordinary selectivity, remarkable sensitivity, and outstanding capability to bind molecules, those membranes are also cost-effective, highly stable, and configurable in terms of recognition and, therefore, inalienable in various application fields. Issues relating to the potential future for the paper are discussed in the last section with the focus on the improvement of resource practical application across different areas. Hence, this review can be seen as a kind of cookbook for the design and fabrication of MIP-CMs with an intention to expand the scope of their application.

Long-acting transdermal drug delivery formulations: Current developments and innovative pharmaceutical approaches

Transdermal administration remains an active research and development area as an alternative route for long-acting drug delivery. It avoids major drawbacks of conventional oral (gastrointestinal side effects, low drug bioavailability, and need for multiple dosing) or parenteral routes (invasiveness, pain, and psychological stress and bio-hazardous waste generated from needles), thereby increasing patient appeal and compliance. This review focuses on the current state of long-acting transdermal drug delivery, including adhesive patches, microneedles, and molecularly imprinted polymeric systems. Each subsection describes an approach including key considerations in formulation development, design, and process parameters with schematics. An overview of commercially available conventional (adhesive) patches for long-acting drug delivery (longer than 24 h), the reservoir- and matrix-type systems under preclinical evaluation, as well as the advanced transdermal formulations, such as the core-shell, nanoformulations-incorporated and stimuli-responsive microneedles, and 3D-printed and molecularly imprinted polymers that are in development, is also provided. Finally, we elaborated on translational aspects, challenges in patch formulation development, and future directions for the clinical advancement of new long-acting transdermal products.

In Vivo Applications of Molecularly Imprinted Polymers for Drug Delivery: A Pharmaceutical Perspective

Molecularly imprinted polymers (MIPs) have been proven to be a promising candidate for drug delivery systems (DDS) due to their ability to provide a sustained and controlled drug release, making them useful for treating a wide range of medical conditions. MIP-based DDS offer many advantages, including the administration of a smaller drug doses, due to the higher drug payload or targeted delivery, resulting in fewer side effects, as well as the possibility of attaining high concentrations of the drug in the targeted tissues. Whether designed as drug reservoirs or targeted DDS, MIPs are of great value to drug delivery as conventional drug formulations can be redesigned as DDS to overcome the active pharmaceutical ingredient's (APIs) poor bioavailability, toxic effects, or other shortcomings that previously made them less efficient or unsuitable for therapy. Therefore, MIP design could be a promising alternative to the challenging research and development of new lead compounds. Research on MIPs is primarily conducted from a material science perspective, which often overlooks some of their key pharmaceutical requirements. In this review, we emphasize the specific features that make MIPs suitable for clinical use, from both a material science and a biopharmaceutical perspective.

A Critical Review of Analytical Applications of Chitosan as a Sustainable Chemical with Functions Galore

Biomass and biowastes stand as sustainable and cost-effective environmentally benign alternative feedstock. Chitosan is a biocompatible, bioactive, and biodegradable biopolymer derived from chitin to achieve eight aspects out of the 12 green chemistry principles. Chitosan got significant attention in several fields including chemical analysis, in addition to chemical functionally, which enabled its use as adsorbent and its structural crosslinking using various crosslinkers. The physicochemical, technological, and optical properties of chitosan have been extensively exploited in analysis. Mainly, deacetylation degree and molecular weight are controlling its properties and hence controlling its functions. This review presents a structure, properties, and functions relationships of chitosan. It also aims to provide an overview of the different functions that chitosan can serve in each analytical technique such as supporting matrix, catalyst…etc. The contribution of chitosan in improving the ecological performance is discussed in each technique.

Role of molecularly imprinted hydrogels in drug delivery - A current perspective

Molecular imprinting in hydrogels crafts memory for template molecules in a flexible macromolecular structure. Molecular imprinting can control the pattern of the drug release via different mechanistic pathways which may involve swelling, which releases the drug via diffusion or receptive-swollen networks. Responsive hydrogels or smart hydrogels can be tailored to undergo a change in the network structure in response to a stimulus by inserting specific chemical or biological entities along their backbone polymer chains. The stimuli which can be either physical, chemical or biochemical in nature, may impact at various energy levels thereby initiating the molecular interactions at critical onset points. Conventional hydrogels lack in responding to an external stimuli in a swift manner, hence the molecular imprinting technology can significantly advance the therapeutic efficiency of the drugs with anticipated controlled release and targeting efficiency. Molecular imprinting in hydrogels is thus anticipated as a step towards establishment of drug delivery systems by providing improved delivery profiles or longer release times and deliver the drugs in a feedback regulated way. The review article focuses on the current scenario of molecularly imprinted hydrogels with emphasis on the imprinting strategies within hydrogels and challenges encountered, latent translational applications, and future perspectives.

Green Chemistry and Molecularly Imprinted Membranes

Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.

Molecularly imprinted polymers: preparation, characterisation, and application in drug delivery systems

Molecular imprinting technology defines the creation of molecularly imprinted polymer (MIP) molecules in which template molecules can place in a key-lock relationship through shape, diameter, and functional groups. Although molecular imprinting technology has been employed in different fields, its applications in drug delivery systems (DDSs) have gained momentum recently. The high loading efficiency, high stability, and controlled drug release are the primary advantages of MIPs. Here, the main components, preparation methods, and characterisation tests of MIPs are summarised, and their applications in DDSs administered by different routes are evaluated in detail. The review offers a perspective on molecular imprinting technology and applications of MIPs in drug delivery by surveying the literature approximately 1998-2021 together with the outlined prospects.

Enantioselective chitosan-based racemic ketoprofen imprinted polymer: Chiral recognition and resolution study

This work presented a novel racemic imprinting process employing the chiral properties of chitosan monomer. The preparation of racemic ketoprofen (RS-KTP) imprinted polymer (RS-MIP) was conducted using glutaraldehyde as a crosslinker. The nature of elution solvent affected the % desorption ratio suggesting a heterogenous nature of the formed binding sites. Good imprinting was indicated by an imprinting factor of 3.50 for S-KTP. The enantioselectivity of the RS-MIP was indicated by enantioselectivity coefficient of 2.31 and % enantiomeric excess (%ee) of 28.55%. A SPE cartridge packed with RS-MIP enabled resolution of RS-KTP using gradient elution solvent system. Scatchard plot revealed two binding sites types of different affinity towards S-KTP and density observed for the RS-MIP. The binding capacity of RS-MIP showed observed dependence on the % ee of S-KTP indicating its enantioselectivity. The success of using racemic template for the preparation of enantioselective MIP brings a new possibility to achieve enantioseparation of racemic mixtures having very expensive or unavailable pure enantiomers.

Molecularly Imprinted Polymers as State-of-the-Art Drug Carriers in Hydrogel Transdermal Drug Delivery Applications

Molecularly Imprinted Polymers (MIPs) are polymeric networks capable of recognizing determined analytes. Among other methods, non-covalent imprinting has become the most popular synthesis strategy for Molecular Imprinting Technology (MIT). While MIPs are widely used in various scientific fields, one of their most challenging applications lies within pharmaceutical chemistry, namely in therapeutics or various medical therapies. Many studies focus on using hydrogel MIPs in transdermal drug delivery, as the most valuable feature of hydrogels in their application in drug delivery systems that allow controlled diffusion and amplification of the microscopic events. Hydrogels have many advantages over other imprinting materials, such as milder synthesis conditions at lower temperatures or the increase in the availability of biological templates like DNA, protein, and nucleic acid. Moreover, one of the most desirable controlled drug delivery applications is the development of stimuli-responsive hydrogels that can modulate the release in response to changes in pH, temperature, ionic strength, or others. The most important feature of these systems is that they can be designed to operate within a particular human body area due to the possibility of adapting to well-known environmental conditions. Therefore, molecularly imprinted hydrogels play an important role in the development of modern drug delivery systems.

Alleviating neuropathy of diabetic foot ulcer by co-delivery of venlafaxine and matrix metalloproteinase drug-loaded cellulose nanofiber sheets: production, in vitro characterization and clinical trial

BACKGROUND

The objective of the present study was co-delivery of venlafaxin (VEN) and doxycycline (DOX), a matrix metalloproteinase inhibitor drug, for alleviating inflammation and neuropathy in diabetic foot ulcer (DFU).

METHODS

Bacterial cellulose nanofiber sheets (BCNS) were loaded with DOX and VEN and categorized by their loading efficiency, release profiles and ex vivo permeation throughrat skin. The optimized nanofibers were used in patients with DFU to compare with the standard wound care regimen during a 12-week trial. Wound area was measured every 2 weeks. Biochemical parameters and microscopic studies of the skin were examined prior and at the end of the treatment. The Michigan Neuropathy Screening Instrument (MNSI) questionnaire was utilized to assess diabetic neuropathy.

RESULTS

The optimum formulation showed loading efficiency of 37.8 ± 1.6% for DOX and 48 ± 1.9% for VEN. Rat skin permeation was 40% for DOX after 7-29 h and 83% for VEN during 105 h. Patients treated with BCNS showed no significant difference in their biochemical parameters before and after intervention. The ulcer size showed faster reduction after 12 weeks in the treatment group compared to the control group. The abnormal responses in the MNSI questionnaire decreased and pain-free walking distance increased significantly in the treatment group compared with the control group (p < 0.001). Microscopic studies of the skin after using nanofibers showed a large number of polymorphonuclear chronic inflammatory cells and formation of new capillary beds.

CONCLUSIONS

The BCNS loaded with DOX and VEN may expedite healing and reduce neuropathy in the DFU of diabetic patients.

Chiral 4-O-acylterpineol as transdermal permeation enhancers: insights of the enhancement mechanisms of a transdermal enantioselective delivery system for flurbiprofen

In order to devise more effective penetration enhancers, 4-O-acylterpineol derivatives which were expected to be hydrolyzed into nontoxic metabolites by esterase in the living epidermis, were synthesized from 4-terpineol (4-TER) enantiomers and straight chain fatty acids. Their promoting activities on the SR-flurbiprofen and its enantiomers were tested across full-thickness rabbit skin, as well as to correlate under in vitro and in vivo conditions. The permeation studies indicated that both d-4-O-acylterpineol and l-4-O-acylterpineol had significant enhancing effects, interestingly, d-4-O-aclyterpineol had higher enhancing effects than l-4-O-aclyterpineol with the exception of d-4-methyl-1-(1-methylethyl)-3-cyclohexen-1-yl octadec-9-enoate (d-4-T-dC18). The mechanism of 4-O-acylterpineol facilitating the drug penetration across the skin was confirmed by Attenuated total reflection-Fourier transformed infrared spectroscopy (ATR-FTIR) and molecular simulation. The mechanism of penetration enhancers promoting drug release was explored by the in vitro release experiment. Finally, a relative safety skin irritation of enhancers was also investigated by in vivo histological evaluation. The present research suggested that d-4-O-aclyterpineol and l-4-O-aclyterpineol could significantly promote the penetration of SR-flurbiprofen and its enantiomers both in vitro and in vivo, with the superiorities of high flux and low dermal toxicity.

Molecularly imprinted polymers in biological applications

Molecularly imprinted polymers (MIPs) are currently widely used and further developed for biological applications. The MIP synthesis procedure is a key process, and a wide variety of protocols exist. The templates that are used for imprinting vary from the smallest glycosylated glycan structures or even amino acids to whole proteins or bacteria. The low cost, quick preparation, stability and reproducibility have been highlighted as advantages of MIPs. The biological applications utilizing MIPs discussed here include enzyme-linked assays, sensors, in vivo applications, drug delivery, cancer diagnostics and more. Indeed, there are numerous examples of how MIPs can be used as recognition elements similar to natural antibodies.

Poloxamer Hydrogels for Biomedical Applications

This review article focuses on thermoresponsive hydrogels consisting of poloxamers which are of high interest for biomedical application especially in drug delivery for ophthalmic, injectable, transdermal, and vaginal administration. These hydrogels remain fluid at room temperature but become more viscous gel once they are exposed to body temperature. In this way, the gelling system remains at the topical level for a long time and the drug release is controlled and prolonged. Poloxamers are synthetic triblock copolymers of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO), also commercially known as Pluronics®, Synperonics® or Lutrol®. The different poloxamers cover a range of liquids, pastes, and solids, with molecular weights and ethylene oxide-propylene oxide weight ratios varying from 1100 to 14,000 and 1:9 to 8:2, respectively. Concentrated aqueous solutions of poloxamers form thermoreversible gels. In recent years this type of gel has arouse interest for tissue engineering. Finally, the use of poloxamers as biosurfactants is evaluated since they are able to form micelles in an aqueous environment above a concentration threshold known as critical micelle concentration (CMC). This property is exploited for drug delivery and different therapeutic applications.

A polyhedral oligomeric silsesquioxane/molecular sieve codoped molecularly imprinted polymer for gastroretentive drug-controlled release in vivo

Flotation drug delivery system (FDDS) is recognized as an efficient means to improve the therapeutic efficiency and enhance the drug bioavailability. Herein, we have developed a molecularly imprinted polymer (MIP) against capecitabine (CAP) to fabricate a FDDS by exploiting polyhedral oligomeric silsesquioxane (POSS) and Mobil composition of matter no. 41 (MCM-41) as the codopant. The synergistic effect of POSS and MCM-41 endows MIPs with enhanced imprinting effect and improved mass transfer efficiency. The impacts of the type of dopant, the type of functional monomer, the template/functional monomer ratio and the functional monomer/cross-linker ratio on imprinting effect have been investigated in detail. The POSS/MCM-41 codoped MIPs present favourable sustained release property in vitro and in vivo, displaying a high relative bioavailability of 173.4%. The proposed MIPs with high selectivity and superior physical and chemical stability exhibit potential as an alternative drug carrier applied in FDDS.

Stainless Steel Wire Mesh Supported Molecularly Imprinted Composite Membranes for Selective Separation of Ebracteolata Compound B from Euphorbia fischeriana

Stainless steel wire mesh supported molecularly imprinted composite membranes for selective separation of Ebracteolata Compound B (ECB) were prepared based on surface polymerization using ECB separated from Euphorbia fischeriana as a template, acrylamide as a functional monomer, ethylene glycol dimethacrylate as a cross-linker, azodiisobutyronitrile as an initiator, and stainless steel wire mesh as support. Structure and purity of ECB were characterized by nuclear magenetic resonance (¹H-NMR, 13C-NMR) and ultra high performance liquid chromatography (UHPLC). The molecularly imprinted composite membranes were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). The membrane adsorbed on the ECB reached equilibrium about 30 min later, with a maximum adsorption amount of 3.39 μmol/cm². Adsorption behavior between ECB and the molecularly imprinted composite membranes followed pseudo-second-order kinetics equation and Freundlich isotherm model. The molecularly imprinted composite membranes that could selectively identify and transport ECB in similar structures have a permeation rate of 38.71% to ECB. The ECB content in the permeation solution derived from the extract of Euphorbia fischeriana through the imprinted membrane was 87%. Overall, the obtained results demonstrated that an efficient approach with the molecularly imprinted composite membranes for selective separation of ECB from Euphorbia fischeriana.

The molecularly imprinted polymer essentials: curation of anticancer, ophthalmic, and projected gene therapy drug delivery systems

The development of polymeric materials as drug delivery systems has advanced from systems that rely on classical passive targeting to carriers that can sustain the precisely controlled release of payloads upon physicochemical triggers in desired microenvironment. Molecularly imprinted polymers (MIP), materials designed to capture specific molecules based on their molecular shape and charge distribution, are attractive candidates for fulfilling these purposes. In particular, drug-imprinted polymers coupled with active targeting mechanisms have been explored as potential drug delivery systems. In this review, we have curated important recent efforts in the development of drug-imprinted polymers in a variety of clinical applications, especially oncology and ophthalmology. MIP possesses properties that may complement the traditional delivery systems of these two disciplines, such as passive enhanced permeability and retention effect (EPR) in cancer tumors, and passive drug diffusion in delivering ophthalmic therapeutics. Furthermore, the prospects of MIP integration with the emerging gene therapies will be discussed.

Biomaterials for drug delivery patches

The limited efficiency of conventional drugs has been instigated the development of new and more effective drug delivery systems (DDS). Transdermal DDS, are associated with numerous advantages such its painless application and less frequent replacement and greater flexibility of dosing, features that triggered the research and development of such devices. Such systems have been produced using either biopolymer; or synthetic polymers. Although the first ones are safer, biocompatible and present a controlled degradation by human enzymes or water, the second ones are the most currently available in the market due to their greater mechanical resistance and flexibility, and non-degradation over time. This review highlights the most recent advances (mainly in the last five years) of patches aimed for transdermal drug delivery, focusing on the different materials (natural, synthetic and blends) and latest designs for the development of such devices, emphasizing also their combination with drug carriers that enable enhanced drug solubility and a more controlled release of the drug over the time. The benefits and limitations of different patches formulations are considered with reference to their appliance to transdermal drug delivery. Furthermore, a record of the currently available patches on the market is given, featuring their most relevant characteristics. Finally, a list of most recent/ongoing clinical trials regarding the use of patches for skin disorders is detailed and critical insights on the current state of patches for transdermal drug delivery are also provided.

Sodium deoxycholate/TRIS-based hydrogels for multipurpose solute delivery vehicles: Ambient release, drug release, and enantiopreferential release

Herein, we report the investigation of sodium deoxycholate (NaDC)/TRIS-based hydrogels as delivery vehicles for a broad range of applications. Three hydrogel formulations were chosen for unique rheological behaviors that suggest a change in internal hydrogel structure with the application of a shear force. In this work, we compare solute release from sheared and non-sheared hydrogels in order to explore the effect of shear force on structure and release kinetics. It was found that the application of a shear force, in addition to changes in temperature, drug solubility, drug concentration, and hydrogel formulation each affected the amount of solute ultimately released from a hydrogel system. Moreover, the use of the inherent chirality of the hydrogel network for enantio-preferential drug release was also explored. We show significant enantio-preference in the release of model drugs tryptophan and ibuprofen from the hydrogel network. Furthermore, hydrophobic domains within the hydrogel network were exploited to enable ibuprofen loading at ten times the maximum water solubility. Retention of enantio-preference was observed at this higher ibuprofen concentration. Cyclodextrin modification to the hydrogel matrix allowed for enantio-preferential inversion which is an unprecedented observation.

Molecularly imprinted polymers based drug delivery devices: a way to application in modern pharmacotherapy. A review

This review presents the current status of molecularly imprinted polymers (MIPs) for drug delivery, in particular the studies that focus on biocompatibility, cytotoxicity, and in vitro or in vivo behavior of MIPs. It also shows the limitations that hamper the introduction of MIPs to pharmacotherapy and prevent this class of polymers from commercialization. MIPs are promising materials in the construction of drug delivery devices because they can provide improved delivery profiles or longer release times and deliver the drugs in the feedback regulated way, which is extremely important in modern pharmacotherapy. Here, a brief overview of the imprinting process and a concise description of drug release mechanisms from the imprinted materials will be presented followed by the discussion of potential MIP drug delivery devices for ocular, dermal, intravenous and oral routes of administration. Finally, future prospects for imprinted drug delivery forms will be outlined.

Adsorptive molecularly imprinted composite membranes for chiral separation of phenylalanine

Two types of composite imprinted membranes, i.e., composite membrane comprised of D-Phe imprinted beads and D-Phe imprinted membrane or DCM and composite membrane comprised of L-Phe imprinted beads and L-Phe imprinted membranes or LCM, were synthesized by phase inversion technique after a uniform dispersion of beads within the polymeric solutions using simple physico-mechanical process. The assemblies of the prepared DCM, LCM and control membranes were employed in ultrafiltration for chiral separation of D, L-Phenylalanine racemate solution. DCM and LCM showed an improved adsorption capacity (0.334 mg g-1 and 0.365 mg g-1 respectively), and adsorption selectivity (2.72 and 2.98 respectively). However, the percent rejection of the template and counter enantiomer were lower than that of control membranes. Compared to control membrane, the DCM and LCM showed inverse permselectivity. These composite membranes having better adsorption and separation ability for Phenylalanine racemate solution will be suitable in the future for various other applications.

Surface Molecularly Imprinted Polymer of Chitosan Grafted Poly(methyl methacrylate) for 5-Fluorouracil and Controlled Release

The molecular surface imprinted graft copolymer of chitosan with methyl methacrylate (MIP-CS-g-PMMA) were prepared by free radical polymerization with 5-fluorouracil (5-FU) as the template molecule using initiator of ammonium persulfate as adsorption system. MIPs were characterized by FTIR, X-ray diffraction, thermo-gravimetric analysis, (1)H NMR and SEM. The mechanism of graft copolymerization and factors affected graft reaction were studied in details, and the optimum reaction conditions (to the highest %G and %E as the standard) were obtained at [MMA] 1.2 mol/L, [Chitosan] 16.67 mol/L, [initiator] 0.0062 mol/L, temperature 60 °C and reaction time 7 h. MIPs exhibited high recognition selectivity and excellent combining affinity to template molecular. The in vitro release of the 5-FU was highly pH-dependent and time delayed. The release behavior showed that the drugs did not release in simulated gastric fluid (pH = 1.0), and the drug release was small in the simulated small intestinal fluid (pH = 6.8), and drug abrupt release will be produced in the simulated colon fluid (pH = 7.4), indicating excellent colon-specific drug delivery behavior.

Quantitative characterization of chitosan in the skin by Fourier-transform infrared spectroscopic imaging and ninhydrin assay: application in transdermal sciences

The chitosan has been used as the primary excipient in transdermal particulate dosage form design. Its distribution pattern across the epidermis and dermis is not easily accessible through chemical assay and limited to radiolabelled molecules via quantitative autoradiography. This study explored Fourier-transform infrared spectroscopy imaging technique with built-in microscope as the means to examine chitosan molecular distribution over epidermis and dermis with the aid of histology operation. Fourier-transform infrared spectroscopy skin imaging was conducted using chitosan of varying molecular weights, deacetylation degrees, particle sizes and zeta potentials, obtained via microwave ligation of polymer chains at solution state. Both skin permeation and retention characteristics of chitosan increased with the use of smaller chitosan molecules with reduced acetyl content and size, and increased positive charge density. The ratio of epidermal to dermal chitosan content decreased with the use of these chitosan molecules as their accumulation in dermis (3.90% to 18.22%) was raised to a greater extent than epidermis (0.62% to 1.92%). A larger dermal chitosan accumulation nonetheless did not promote the transdermal polymer passage more than the epidermal chitosan. A small increase in epidermal chitosan content apparently could fluidize the stratum corneum and was more essential to dictate molecular permeation into dermis and systemic circulation. The histology technique aided Fourier-transform infrared spectroscopy imaging approach introduces a new dimension to the mechanistic aspect of chitosan in transdermal delivery.

Molecularly imprinted polymeric micro- and nano-particles for the targeted delivery of active molecules

Molecular imprinting (MI) represents a strategy to introduce a 'molecular memory' in a polymeric system obtaining materials with specific recognition properties. MI particles can be used as drug delivery systems providing a targeted release and thus reducing the side effects. The introduction of molecular recognition properties on a polymeric drug carrier represents a challenge in the development of targeted delivery systems to increase their efficiency. This review will summarize the limited number of drug delivery MI particles described in the literature along with an overview of potential solutions for a larger exploitation of MI particles as targeted drug delivery carriers. Molecularly imprinted drug carriers can be considered interesting candidates to significantly improve the efficiency of a controlled drug treatment.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Molecular imprinted polymers as drug delivery vehicles

This review is aimed to discuss the molecular imprinted polymer (MIP)-based drug delivery systems (DDS). Molecular imprinted polymers have proved to possess the potential and also as a suitable material in several areas over a long period of time. However, only recently it has been employed for pharmaceuticals and biomedical applications, particularly as drug delivery vehicles due to properties including selective recognition generated from imprinting the desired analyte, favorable in harsh experimental conditions, and feedback-controlled recognitive drug release. Hence, this review will discuss their synthesis, the reason they are selected as drug delivery vehicles and for their applications in several drug administration routes (i.e. transdermal, ocular and gastrointestinal or stimuli-reactive routes).

Bio-mimetic sensors based on molecularly imprinted membranes

An important challenge for scientific research is the production of artificial systems able to mimic the recognition mechanisms occurring at the molecular level in living systems. A valid contribution in this direction resulted from the development of molecular imprinting. By means of this technology, selective molecular recognition sites are introduced in a polymer, thus conferring it bio-mimetic properties. The potential applications of these systems include affinity separations, medical diagnostics, drug delivery, catalysis, etc. Recently, bio-sensing systems using molecularly imprinted membranes, a special form of imprinted polymers, have received the attention of scientists in various fields. In these systems imprinted membranes are used as bio-mimetic recognition elements which are integrated with a transducer component. The direct and rapid determination of an interaction between the recognition element and the target analyte (template) was an encouraging factor for the development of such systems as alternatives to traditional bio-assay methods. Due to their high stability, sensitivity and specificity, bio-mimetic sensors-based membranes are used for environmental, food, and clinical uses. This review deals with the development of molecularly imprinted polymers and their different preparation methods. Referring to the last decades, the application of these membranes as bio-mimetic sensor devices will be also reported.

Characteristics and anticancer properties of bacterial cellulose films containing ethanolic extract of mangosteen peel

Bacterial cellulose (BC) films containing an ethanolic extract of mangosteen peel were prepared and their physical, chemical, and anticancer properties were characterized. The cumulative absorption and release profiles of bioactive compounds in the films were determined based on total phenolic and α-mangostin content. The BC films were filled with total phenolic compounds expressed as gallic acid equivalent varying from 4.72 to 275.91 mg/cm3 dried film, and α-mangostin varying from 2.06 to 248.20 mg/cm3 dried film. A Fourier transform infrared spectroscopy evaluation showed that there were weak interactions between the functional groups of the extract and the BC. Decreases in the water absorption capacity and water vapor transmission rate of the modified films were detected. Release studies were performed using Franz diffusion cells. In a non-transdermal system, the release of bioactive compounds from the films depended on concentration, immersion time, and the pH of the dissolution medium. A transdermal diffusion study showed that 59-62% of total phenolic compounds that were initially loaded were released from the films and more than 95% of bioactive compounds released from the films were adsorbed into pig skin. Only very small amount of the bioactive compounds penetrated through pig skin and into phosphate and acetate buffers. In studies of anticancer abilities, the release of 2.0 μg/ml α-mangostin from the BC films could suppress the growth of B16F10 melanoma (approximately 31% survival). With the release of α-mangostin at greater than 17.4-18.4 μg/ml, less than 15 and 5% survival of B16F10 melanoma and MCF-7 breast cancer cells, respectively, was observed.

A review of bacterial cellulose-based drug delivery systems: their biochemistry, current approaches and future prospects

Objectives

The field of pharmaceutical technology is expanding rapidly because of the increasing number of drug delivery options. Successful drug delivery is influenced by multiple factors, one of which is the appropriate identification of materials for research and engineering of new drug delivery systems. Bacterial cellulose (BC) is one such biopolymer that fulfils the criteria for consideration as a drug delivery material.

Key findings

BC showed versatility in terms of its potential for in-situ modulation, chemical modification after synthesis and application in the biomedical field, thus expanding the current, more limited view of BC and facilitating the investigation of its potential for application in drug delivery.

Summary

Cellulose, which is widely available in nature, has numerous applications. One of the applications is that of BC in the pharmaceutical and biomedical fields, where it has been primarily applied for transdermal formulations to improve clinical outcomes. This review takes a multidisciplinary approach to consideration of the feasibility and potential benefits of BC in the development of other drug delivery systems for various routes of administration.

Coumarin derivatives, but not coumarin itself, cause skin irritation via topical delivery

Coumarin and its derivatives are widely employed as a fragrance in cosmetics and skin care products. The skin absorption level and possible disruption to the skin by topical application of coumarins were evaluated in this study. Percutaneous absorption of osthole, daphnoretin, coumarin, byakangelicin, and 7-hydroxycoumarin was assessed in vitro and in vivo. Skin physiology measurements and immunoblotting were utilized as methodologies for validating toxicity. The relationship between structures and permeation/toxicity of coumarins was elucidated. Both equimolar concentration and saturated solubility in 30% ethanol were used as the applied dose. Osthole with the most lipophilic characteristic demonstrated the greatest skin accumulation, followed by coumarin and 7-hydroxycoumarin. Coumarin was the permeant with the highest flux across the skin. The trend of in vivo deposition was consistent with that of the in vitro profiles. Skin uptake of osthole was 8-fold higher than that of coumarin. Hair follicles played a significant role as a pathway for transport of coumarin according to the examination of follicular accumulation. Osthole and 7-hydroxycoumarin slightly, but significantly, enhanced transepidermal water loss after a consecutive 5-day administration. The immunoblotting profiling verified the role of proliferation in skin damage induced by osthole, byakangelicin, and 7-hydroxycoumarin. The proliferation-related proteins examined in this work included glucose-regulated proteins, cytokeratin, and C-myc. Daphnoretin and coumarin showed a negligible alteration on protein biomarkers. The experimental results suggested that skin irritation caused by coumarins was mainly derived from the analogs but not from coumarin itself.

Systemic delivery of β-blockers via transdermal route for hypertension

Hypertension is the most common cardiovascular disease worldwide. Moreover, management of hypertension requires long-term treatment that may result in poor patient compliance with conventional dosage forms due to greater frequency of drug administration. Although there is availability of a plethora of therapeutically effective antihypertensive molecules, inadequate patient welfare is observed; this arguably presents an opportunity to deliver antihypertensive agents through a different route. Ever since the transdermal drug delivery came into existence, it has offered great advantages including non-invasiveness, prolonged therapeutic effect, reduced side effects, improved bioavailability, better patient compliance and easy termination of drug therapy. Attempts were made to develop the transdermal therapeutic system for various antihypertensive agents, including β-blockers, an important antihypertensive class. β-blockers are potent, highly effective in the management of hypertension and other heart ailments by blocking the effects of normal amounts of adrenaline in the heart and blood vessels. The shortcomings associated with β-blockers such as more frequent dose administration, extensive first pass metabolism and variable bioavailability, make them an ideal candidate for transdermal therapeutic systems. The present article gives a brief view of different β-blockers formulated as transdermal therapeutic system in detail to enhance the bioavailability as well as to improve patient compliance. Constant improvement in this field holds promise for the long-term success in technologically advanced transdermal dosage forms being commercialized sooner rather than later.

Recent advances in gel technologies for topical and transdermal drug delivery

Transdermal drug delivery systems are a constant source of interest because of the benefits that they afford in overcoming many drawbacks associated with other modes of drug delivery (i.e. oral, intravenous). Because of the impermeable nature of the skin, designing a suitable drug delivery vehicle that penetrates the skin barrier is challenging. Gels are semisolid formulations, which have an external solvent phase, may be hydrophobic or hydrophilic in nature, and are immobilized within the spaces of a three-dimensional network structure. Gels have a broad range of applications in food, cosmetics, biotechnology, pharmatechnology, etc. Typically, gels can be distinguished according to the nature of the liquid phase, for example, organogels (oleogels) contain an organic solvent, and hydrogels contain water. Recent studies have reported other types of gels for dermal drug application, such as proniosomal gels, emulgels, bigels and aerogels. This review aims to introduce the latest trends in transdermal drug delivery via traditional hydrogels and organogels and to provide insight into the latest gel types (proniosomal gels, emulgels, bigels and aerogels) as well as recent technologies for topical and transdermal drug delivery.