Chondrogenesis in injectable enzymatically crosslinked heparin/dextran hydrogels

Bioinspired injectable hydrogels for bone regeneration

The effective regeneration of bone/cartilage defects remains a significant clinical challenge, causing irreversible damage to millions annually.Conventional therapies such as autologous or artificial bone grafting often yield unsatisfactory outcomes, emphasizing the urgent need for innovative treatment methods. Biomaterial-based strategies, including hydrogels and active scaffolds, have shown potential in promoting bone/cartilage regeneration. Among them, injectable hydrogels have garnered substantial attention in recent years on account of their minimal invasiveness, shape adaptation, and controlled spatiotemporal release. This review systematically discusses the synthesis of injectable hydrogels, bioinspired approaches-covering microenvironment, structural, compositional, and bioactive component-inspired strategies-and their applications in various bone/cartilage disease models, highlighting bone/cartilage regeneration from an innovative perspective of bioinspired design. Taken together, bioinspired injectable hydrogels offer promising and feasible solutions for promoting bone/cartilage regeneration, ultimately laying the foundations for clinical applications. Furthermore, insights into further prospective directions for AI in injectable hydrogels screening and organoid construction are provided.

Bioactive Hydrogels Based on Tyramine and Maleimide Functionalized Dextran for Tissue Engineering Applications

Hydrogels are widely used in tissue engineering due to their ability to form three-dimensional (3D) structures that support cellular functions and mimic the extracellular matrix (ECM). Despite their advantages, dextran-based hydrogels lack intrinsic biological activity, limiting their use in this field. Here, we present a strategy for developing bioactive hydrogels through sequential thiol-maleimide bio-functionalization and enzyme-catalyzed crosslinking. The hydrogel network is formed through the reaction of tyramine moieties in the presence of horseradish peroxidase (HRP) and hydrogen peroxide (H2O2), allowing for tunable gelation time and stiffness by adjusting H2O2 concentrations. Maleimide groups on the hydrogel backbone enable the coupling of thiol-containing bioactive molecules, such as arginylglycylaspartic acid (RGD) peptides, to enhance biological activity. We examined the effects of hydrogel stiffness and RGD concentration on human mesenchymal stem cells (hMSCs) during differentiation and found that hMSCs encapsulated within these hydrogels exhibited over 88% cell viability on day 1 across all conditions, with a slight reduction to 60-81% by day 14. Furthermore, the hydrogels facilitated adipogenic differentiation, as evidenced by positive Oil Red O staining. These findings demonstrate that DexTA-Mal hydrogels create a biocompatible environment that is conducive to cell viability and differentiation, offering a versatile platform for future tissue engineering applications.

Smart responsive in situ hydrogel systems applied in bone tissue engineering

The repair of irregular bone tissue suffers severe clinical problems due to the scarcity of an appropriate therapeutic carrier that can match dynamic and complex bone damage. Fortunately, stimuli-responsive in situ hydrogel systems that are triggered by a special microenvironment could be an ideal method of regenerating bone tissue because of the injectability, in situ gelatin, and spatiotemporally tunable drug release. Herein, we introduce the two main stimulus-response approaches, exogenous and endogenous, to forming in situ hydrogels in bone tissue engineering. First, we summarize specific and distinct responses to an extensive range of external stimuli (e.g., ultraviolet, near-infrared, ultrasound, etc.) to form in situ hydrogels created from biocompatible materials modified by various functional groups or hybrid functional nanoparticles. Furthermore, "smart" hydrogels, which respond to endogenous physiological or environmental stimuli (e.g., temperature, pH, enzyme, etc.), can achieve in situ gelation by one injection in vivo without additional intervention. Moreover, the mild chemistry response-mediated in situ hydrogel systems also offer fascinating prospects in bone tissue engineering, such as a Diels-Alder, Michael addition, thiol-Michael addition, and Schiff reactions, etc. The recent developments and challenges of various smart in situ hydrogels and their application to drug administration and bone tissue engineering are discussed in this review. It is anticipated that advanced strategies and innovative ideas of in situ hydrogels will be exploited in the clinical field and increase the quality of life for patients with bone damage.

A review of advanced hydrogels for cartilage tissue engineering

With the increase in weight and age of the population, the consumption of tobacco, inappropriate foods, and the reduction of sports activities in recent years, bone and joint diseases such as osteoarthritis (OA) have become more common in the world. From the past until now, various treatment strategies (e.g., microfracture treatment, Autologous Chondrocyte Implantation (ACI), and Mosaicplasty) have been investigated and studied for the prevention and treatment of this disease. However, these methods face problems such as being invasive, not fully repairing the tissue, and damaging the surrounding tissues. Tissue engineering, including cartilage tissue engineering, is one of the minimally invasive, innovative, and effective methods for the treatment and regeneration of damaged cartilage, which has attracted the attention of scientists in the fields of medicine and biomaterials engineering in the past several years. Hydrogels of different types with diverse properties have become desirable candidates for engineering and treating cartilage tissue. They can cover most of the shortcomings of other treatment methods and cause the least secondary damage to the patient. Besides using hydrogels as an ideal strategy, new drug delivery and treatment methods, such as targeted drug delivery and treatment through mechanical signaling, have been studied as interesting strategies. In this study, we review and discuss various types of hydrogels, biomaterials used for hydrogel manufacturing, cartilage-targeting drug delivery, and mechanosignaling as modern strategies for cartilage treatment.

Composite Hydrogel Dressings with Enhanced Mechanical Properties and Anti-Inflammatory Ability for Effectively Promoting Wound Repair

Background

Hydrogel dressings have been used as a crucial method to keep the wound wet and hasten the healing process. Due to safety concerns regarding the gel components, low mechanical adhesiveness, and unsatisfactory anti-inflammatory capacity qualities for practical uses in vivo, leading to the clinical translation of wound dressings is still difficult.

Methods

A type of composite hydrogel (acrylamide/polyethylene glycol diacrylate/tannic acid, ie, AM/PEGDA/TA) by double bond crosslinking, Schiff base, and hydrogen bond interaction is proposed. The mechanical characteristics, adhesiveness, and biocompatibility of the hydrogel system were all thoroughly examined. Additionally, a full-thickness cutaneous wound model was employed to assess the in vivo wound healing capacity of resulting hydrogel dressings.

Results

Benefiting the mechanism of multiple crosslinking, the designed composite hydrogels showed significant mechanical strength, outstanding adhesive capability, and good cytocompatibility. Moreover, the hydrogel system also had excellent shape adaptability, and they can be perfectly integrated into the irregularly shaped wounds through a fast in situ forming approach. Additional in vivo tests supported the findings that the full-thickness wound treated with the composite hydrogels showed quicker epithelial tissue regeneration, fewer inflammatory cells, more collagen deposition, and greater levels of platelet endothelial cell adhesion molecule (CD31) expression.

Conclusion

These above results might offer a practical and affordable product or method of skin wound therapy in a medical context.

Mimicking the extracellular matrix by incorporating functionalized graphene into hybrid hydrogels

The efficient functionalization of graphene with sulfonic groups using a sustainable approach facilitates the interaction of biomolecules with its surface. The inclusion of these graphene sheets inside a photopolymerized acrylamide-based hydrogel provides a 3D scaffold with viscoelastic behaviour closer to that found in natural tissues. Cell-culture experiments and differentiation assays with SH-SY5Y cells showed that these hybrid hydrogels are non-cytotoxic, thus making them potentially useful as scaffold materials mimicking the extracellular environment.

Choice of Protein, Not Its Amyloid-Fold, Determines the Success of Amyloid-Based Scaffolds for Cartilage Tissue Regeneration

The formation of fibrocartilage during articular cartilage regeneration remains a clinical problem affecting adequate restoration of articular cartilage in joints. To stimulate chondrocytes to form articular cartilage, we investigated the use of amyloid fibril-based scaffolds. The proteins α-synuclein, β-lactoglobulin, and lysozyme were induced to self-assemble into amyloid fibrils and, during dialysis, formed micrometer scale amyloid networks that resemble the cartilage extracellular matrix. Our results show that lysozyme amyloid micronetworks supported chondrocyte viability and extracellular matrix deposition, while α-synuclein and β-lactoglobulin maintained cell viability. With this study, we not only confirm the possible use of amyloid materials for tissue regeneration but also demonstrate that the choice of protein, rather than its amyloid-fold per se, affects the cellular response and tissue formation.

Three-Dimensional Bioprinting of Naturally Derived Hydrogels for the Production of Biomimetic Living Tissues: Benefits and Challenges

Three-dimensional bioprinting is the process of manipulating cell-laden bioinks to fabricate living structures. Three-dimensional bioprinting techniques have brought considerable innovation in biomedicine, especially in the field of tissue engineering, allowing the production of 3D organ and tissue models for in vivo transplantation purposes or for in-depth and precise in vitro analyses. Naturally derived hydrogels, especially those obtained from the decellularization of biological tissues, are promising bioinks for 3D printing purposes, as they present the best biocompatibility characteristics. Despite this, many natural hydrogels do not possess the necessary mechanical properties to allow a simple and immediate application in the 3D printing process. In this review, we focus on the bioactive and mechanical characteristics that natural hydrogels may possess to allow efficient production of organs and tissues for biomedical applications, emphasizing the reinforcement techniques to improve their biomechanical properties.

Electrically Conductive Hydrogels for Articular Cartilage Tissue Engineering

Articular cartilage is a highly specialized tissue found in diarthrodial joints, which is crucial for healthy articular motion. Despite its importance, articular cartilage has limited regenerative capacities, and the degeneration of this tissue is a leading cause of disability worldwide, with hundreds of millions of people affected. As current treatment options for cartilage degeneration remain ineffective, tissue engineering has emerged as an exciting approach to create cartilage substitutes. In particular, hydrogels seem to be suitable candidates for this purpose due to their biocompatibility and high customizability, being able to be tailored to fit the biophysical properties of native cartilage. Furthermore, these hydrogel matrices can be combined with conductive materials in order to simulate the natural electrochemical properties of articular cartilage. In this review, we highlight the most common conductive materials combined with hydrogels and their diverse applications, and then present the current state of research on the development of electrically conductive hydrogels for cartilage tissue engineering. Finally, the main challenges and future perspectives for the application of electrically conductive hydrogels on articular cartilage repair strategies are also discussed.

Injectable hydrogels for bone and cartilage tissue engineering: a review

Tissue engineering, using a combination of living cells, bioactive molecules, and three-dimensional porous scaffolds, is a promising alternative to traditional treatments such as the use of autografts and allografts for bone and cartilage tissue regeneration. Scaffolds, in this combination, can be applied either through surgery by implantation of cell-seeded pre-fabricated scaffolds, or through injection of a solidifying precursor and cell mixture, or as an injectable cell-seeded pre-fabricated scaffold. In situ forming and pre-fabricated injectable scaffolds can be injected directly into the defect site with complex shape and critical size in a minimally invasive manner. Proper and homogeneous distribution of cells, biological factors, and molecular signals in these injectable scaffolds is another advantage over pre-fabricated scaffolds. Due to the importance of injectable scaffolds in tissue engineering, here different types of injectable scaffolds, their design challenges, and applications in bone and cartilage tissue regeneration are reviewed.

Effect of Bone Morphogenetic Protein-2 (BMP-2)/Hydroxyapatite/In Situ-Formed Hyaluronan Hydrogel Composites on Bone Formation in a Murine Model of Posterolateral Lumbar Fusion

Several types of calcium phosphate (CaP) biomaterial carriers have been designed to deliver bone morphogenetic protein-2 (BMP-2) to augment spinal fusion in spinal surgery. Here, we evaluated an in situ-formed hydrogel (IFH) constructed from hyaluronan (IFH-HA) combined with a BMP2/hydroxyapatite (HAP) composite in bone formation in a murine model of posterolateral lumbar fusion (PLF). HAP was submerged in HA-tyramine (TA) polymer solution containing horseradish peroxidase (HRP) and 2 µg BMP-2 (BMP2/HA-TA/HRP solution). H₂O₂ was added to initiate the curing reaction (BMP-2/IFH-HA). phosphate-buffered saline (PBS) was added to the BMP2/HA-TA/HRP solution (BMP-2/HA-TA) instead of H₂O₂ to evaluate the effectiveness of the curing reaction. HAP immersed in PBS was used as a control. PLF model mice were randomly assigned to receive one these composites (n = 10 each).

X-ray images were taken to assess the bone fusion, and microcomputed tomography analysis was conducted to examine new bone formation at the graft site four weeks following surgery. No evidence of fusion was observed four weeks after surgery in the Control or BMP2/HA-TA group. In contrast, the BMP2/IFH-HA group exhibited newly formed bone between the transverse processes and bone union in coronal sections. Relative to the Control and BMP2/HA-TA groups, the BMP2/IFH-HA group showed significantly greater bone volume. The BMP2/IFH-HA group also showed significantly elevated bone mineral content relative to the BMP2/HA-TA group. A composite comprising BMP2/HAP and IFH-HA, thus, enhanced the new bone formation in a murine model of PLF, suggesting its promise for augmenting spinal fusion.

Micro- and nanotechnology in biomedical engineering for cartilage tissue regeneration in osteoarthritis

Osteoarthritis, which typically arises from aging, traumatic injury, or obesity, is the most common form of arthritis, which usually leads to malfunction of the joints and requires medical interventions due to the poor self-healing capacity of articular cartilage. However, currently used medical treatment modalities have reported, at least in part, disappointing and frustrating results for patients with osteoarthritis. Recent progress in the design and fabrication of tissue-engineered microscale/nanoscale platforms, which arises from the convergence of stem cell research and nanotechnology methods, has shown promising results in the administration of new and efficient options for treating osteochondral lesions. This paper presents an overview of the recent advances in osteochondral tissue engineering resulting from the application of micro- and nanotechnology approaches in the structure of biomaterials, including biological and microscale/nanoscale topographical cues, microspheres, nanoparticles, nanofibers, and nanotubes.

Calcium peroxide aids tyramine-alginate gel to crosslink with tyrosinase for efficient cartilage repair

The innate cartilage extracellular matrix is avascular and plays a vital role in innate chondrocytes. Recapping the crucial components of the extracellular matrix in engineered organs via polymeric gels and bioinspired approaches is promising for improving the regenerative aptitude of encapsulated cartilage/chondrocytes. Conventional gel formation techniques for polymeric materials rely on employing oxidative crosslinking, which is constrained in this avascular environment. Further, poor mechanical properties limit the practical applications of polymeric gels and reduce their therapeutic efficacy. Herein, the purpose of this study was to develop a bioadhesive gel possessing dual crosslinking for engineering cartilage. Tyramine (TYR) was first chemically conjugated to the alginate (ALG) backbone to form an ALG-TYR precursor, followed by the addition of calcium peroxide (CaO₂); calcium ions of CaO₂ physically crosslink with ALG, and oxygen atoms of CaO₂ chemically crosslink TYR with tyrosinase, thus enabling dual/enhanced crosslinking and possessing injectability. The ALG-TYR/tyrosinase/CaO₂ gel system was chemically, mechanically, cellularly, and microscopically characterized. The gel system developed herein was biocompatible and showed augmented mechanical strength. The results showed, for the first time, that CaO₂ supplementation preserved cell viability and enhanced the crosslinking ability, bioadhesion, mechanical strength, chondrogenesis, and stability for cartilage regeneration.

Bioinspired tunable hydrogels: An update on methods of preparation, classification, and biomedical and therapeutic applications

Hydrogels exhibit water-insoluble three-dimensional polymeric networks capable of absorbing large amounts of biological fluids. Both natural and synthetic polymers are used for the preparation of hydrogel networks. Such polymeric networks are fabricated through chemical or physical mechanisms of crosslinking. Chemical crosslinking is accomplished mainly through covalent bonding, while physical crosslinking involves self-healing secondary forces like H-bonding, host-guest interactions, and antigen-antibody interactions. The building blocks of the hydrogels play an important role in determining the mechanical, biological, and physicochemical properties. Hydrogels are used in a variety of biomedical applications like diagnostics (biodetection and bioimaging), delivery of therapeutics (drugs, immunotherapeutics, and vaccines), wound dressing and skin materials, cardiac complications, contact lenses, tissue engineering, and cell culture because of the inherent characteristics like enhanced water uptake and structural similarity with the extracellular matrix (ECM). This review highlights the recent trends and advances in the roles of hydrogels in biomedical and therapeutic applications. We also discuss the classification and methods of hydrogels preparation. A brief outlook on the future directions of hydrogels is also presented.

Sulfated Hydrogels in Intervertebral Disc and Cartilage Research

Hydrogels are commonly used for the 3D culture of musculoskeletal cells. Sulfated hydrogels, which have seen a growing interest over the past years, provide a microenvironment that help maintain the phenotype of chondrocytes and chondrocyte-like cells and can be used for sustained delivery of growth factors and other drugs. Sulfated hydrogels are hence valuable tools to improve cartilage and intervertebral disc tissue engineering. To further advance the utilization of these hydrogels, we identify and summarize the current knowledge about different sulfated hydrogels, highlight their beneficial effects in cartilage and disc research, and review the biofabrication processes most suitable to secure best quality assurance through deposition fidelity, repeatability, and attainment of biocompatible morphologies.

Chemically Modified Biopolymers for the Formation of Biomedical Hydrogels

Biopolymers are natural polymers sourced from plants and animals, which include a variety of polysaccharides and polypeptides. The inclusion of biopolymers into biomedical hydrogels is of great interest because of their inherent biochemical and biophysical properties, such as cellular adhesion, degradation, and viscoelasticity. The objective of this Review is to provide a detailed overview of the design and development of biopolymer hydrogels for biomedical applications, with an emphasis on biopolymer chemical modifications and cross-linking methods. First, the fundamentals of biopolymers and chemical conjugation methods to introduce cross-linking groups are described. Cross-linking methods to form biopolymer networks are then discussed in detail, including (i) covalent cross-linking (e.g., free radical chain polymerization, click cross-linking, cross-linking due to oxidation of phenolic groups), (ii) dynamic covalent cross-linking (e.g., Schiff base formation, disulfide formation, reversible Diels-Alder reactions), and (iii) physical cross-linking (e.g., guest-host interactions, hydrogen bonding, metal-ligand coordination, grafted biopolymers). Finally, recent advances in the use of chemically modified biopolymer hydrogels for the biofabrication of tissue scaffolds, therapeutic delivery, tissue adhesives and sealants, as well as the formation of interpenetrating network biopolymer hydrogels, are highlighted.

A review of hydrogel systems based on poly(N-isopropyl acrylamide) for use in the engineering of bone tissues

Bone fracture is usually a medical condition where occurred by high force impact or stress. Recent advances to repair damaged or diseased bone tissues employs three-dimensional (3D) polymer matrices. This review aims to investigate the potential of injectable, dual thermally, and chemically gelable N-isopropyl acrylamide-based hydrogels to deliver scaffold, cells, and growth factors in vitro and in vivo.

Recent Advancements in 3D Printing of Polysaccharide Hydrogels in Cartilage Tissue Engineering

The application of hydrogels coupled with 3-dimensional (3D) printing technologies represents a modern concept in scaffold development in cartilage tissue engineering (CTE). Hydrogels based on natural biomaterials are extensively used for this purpose. This is mainly due to their excellent biocompatibility, inherent bioactivity, and special microstructure that supports tissue regeneration. The use of natural biomaterials, especially polysaccharides and proteins, represents an attractive strategy towards scaffold formation as they mimic the structure of extracellular matrix (ECM) and guide cell growth, proliferation, and phenotype preservation. Polysaccharide-based hydrogels, such as alginate, agarose, chitosan, cellulose, hyaluronan, and dextran, are distinctive scaffold materials with advantageous properties, low cytotoxicity, and tunable functionality. These superior properties can be further complemented with various proteins (e.g., collagen, gelatin, fibroin), forming novel base formulations termed "proteo-saccharides" to improve the scaffold's physiological signaling and mechanical strength. This review highlights the significance of 3D bioprinted scaffolds of natural-based hydrogels used in CTE. Further, the printability and bioink formation of the proteo-saccharides-based hydrogels have also been discussed, including the possible clinical translation of such materials.

Protein Adsorption Enhances Energy Dissipation in Networks of Lysozyme Amyloid Fibrils

Hydrogels of amyloid fibrils are a versatile biomaterial for tissue engineering and other biomedical applications. Their suitability for these applications has been partly ascribed to their excellent and potentially engineerable rheological properties. However, while in biomedical applications the gels have to function in compositionally complex physiological solutions, their rheological behavior is typically only characterized in simple buffers. Here we show that the viscoelastic response of networks of amyloid fibrils of the protein lysozyme in biologically relevant solutions substantially differs from the response in simple buffers. We observe enhanced energy dissipation in both cell culture medium and synovial fluid. We attribute this energy dissipation to interactions of the amyloid fibrils with other molecules in these solutions and especially to the adsorption of the abundantly present protein serum albumin. This finding provides the basis for a better understanding of the performance of amyloid hydrogels in biomedical applications.

Polysaccharides on gelatin-based hydrogels differently affect chondrogenic differentiation of human mesenchymal stromal cells

Selection of feasible hybrid-hydrogels for best chondrogenic differentiation of human mesenchymal stromal cells (hMSCs) represents an important challenge in cartilage regeneration. In this study, three-dimensional hybrid hydrogels obtained by chemical crosslinking of poly (ethylene glycol) diglycidyl ether (PEGDGE), gelatin (G) without or with chitosan (Ch) or dextran (Dx) polysaccharides were developed. The hydrogels, namely G-PEG, G-PEG-Ch and G-PEG-Dx, were prepared with an innovative, versatile and cell-friendly technique that involves two preparation steps specifically chosen to increase the degree of crosslinking and the physical-mechanical stability of the product: a first homogeneous phase reaction followed by directional freezing, freeze-drying and post-curing. Chondrogenic differentiation of human bone marrow mesenchymal stromal cells (hBM-MSC) was tested on these hydrogels to ascertain whether the presence of different polysaccharides could favor the formation of the native cartilage structure. We demonstrated that the hydrogels exhibited an open pore porous morphology with high interconnectivity and the incorporation of Ch and Dx into the G-PEG common backbone determined a slightly reduced stiffness compared to that of G-PEG hydrogels. We demonstrated that G-PEG-Dx showed a significant increase of its anisotropic characteristic and G-PEG-Ch exhibited higher and faster stress relaxation behavior than the other hydrogels. These characteristics were associated to absence of chondrogenic differentiation on G-PEG-Dx scaffold and good chondrogenic differentiation on G-PEG and G-PEG-Ch. Furthermore, G-PEG-Ch induced the minor collagen proteins and the formation of collagen fibrils with a diameter like native cartilage. This study demonstrated that both anisotropic and stress relaxation characteristics of the hybrid hydrogels were important features directly influencing the chondrogenic differentiation potentiality of hBM-MSC.

Acceleration of bone formation using in situ-formed hyaluronan-hydrogel containing bone morphogenetic protein-2 in a mouse critical size bone defect model

BACKGROUND

An enzymatic crosslinking strategy using hydrogen peroxide and horseradish peroxidase is receiving increasing attention for application with in situ-formed hydrogels (IFHGs). IFHGs may also be ideal carrier materials for bone repair, although their ability to carry bone morphogenetic protein-2 (BMP2) has yet to be examined.

OBJECTIVE

We examined the effectiveness of an IFHG made of hyaluronan (IFHG-HA) containing BMP2 for promoting bone formation in a mouse critical size bone defect model.

METHODS

C57/BL6J mice received a 2-mm femoral critical-sized bone defect before being randomly assigned to one of the following treatment groups (n = 6): control (no treatment), IFHG-HA only, PBS with BMP2, and IFHG-HA with BMP2. X-ray radiographs were utilized to track new bone formation, and micro-computed tomography and histological examination were performed on new bone formed at the bone defect site two weeks after surgery.

RESULTS

Mice treated with PBS with BMP2 and IFHG-HA with BMP2 had greater bone volume (BV) and bone mineral content (BMC) than those receiving control, and successfully achieved consolidation. Mice treated with IFHG-HA with BMP2 had significantly higher BV and BMC than those treated with PBS with BMP2.

CONCLUSIONS

IFHG-HA may be an effective carrier for BMP2 to enable delivery for bone defect repair.

Acceleration of bone union by in situ-formed hydrogel containing bone morphogenetic protein-2 in a mouse refractory fracture model

Background

An enzymatic crosslinking strategy using hydrogen peroxide and horseradish peroxidase is receiving increasing attention for application with in situ-formed hydrogels (IFHs). Several studies have reported the application of IFHs in cell delivery and tissue engineering. IFHs may also be ideal carrier materials for bone repair, although their potential as a carrier for bone morphogenetic protein (BMP)-2 has yet to be examined. Here, we examined the effect of an IFH made of hyaluronic acid (IFH-HA) containing BMP-2 in promoting osteogenesis in a mouse refractory fracture model.

Methods

Immediately following a fracture procedure, animals either received no treatment (control) or an injection of IFH-HA/PBS or IFH-HA containing 2 μg BMP-2 (IFH-HA/BMP-2) into the fracture site (n = 16, each treatment).

Results

Fracture sites injected with IFH-HA/BMP-2 showed significantly greater bone volume, bone mineral content, and bone union compared with sites receiving no treatment or treated with IFH-HA/PBS alone (each n = 10). Gene expression levels of osteogenic markers, Alpl, Bglap, and Osx, were significantly raised in the IFH-HA/BMP-2 group compared to the IFH-HA/PBS and control groups (each n = 6).

Conclusion

IFH-HA/BMP-2 may contribute to the treatment of refractory fractures.

Acceleration of Bone Healing by In Situ-Forming Dextran-Tyramine Conjugates Containing Basic Fibroblast Growth Factor in Mice

An enzymatic crosslinking strategy using hydrogen peroxide (H₂O₂) and horseradish peroxidase (HRP) has been receiving increasing attention for use with in situ-formed hydrogels (IFHs). Several studies have reported the application of IFHs in cell delivery and tissue engineering. IFHs may also be ideal carrier materials for bone repair, although their potential as a carrier for basic fibroblast growth factor (bFGF) has yet to be evaluated. Here, we examined the effect of an IFH made of dextran (Dex)-tyramine (TA) conjugates (IFH-Dex-TA) containing bFGF in promoting bone formation in a fracture model in mice. Immediately following a fracture procedure, animals either received no treatment (control) or an injection of IFH-Dex-TA/phosphate-buffered saline (IFH-Dex-TA/PBS) or IFH-Dex-TA containing 1 μg bFGF (IFH-Dex-TA/bFGF) into the fracture site (n=10, each treatment). Fracture sites injected with IFH-Dex-TA/bFGF showed significantly greater bone volume, mineral content, and bone union than sites receiving no treatment or treated with IFH-Dex-TA/PBS alone (each n=10). This Dex-TA gel may be an effective drug delivery system for optimizing bFGF therapy.

Enzyme-catalysed polymer cross-linking: Biocatalytic tools for chemical biology, materials science and beyond

Intermolecular cross-linking is one of the most important techniques that can be used to fundamentally alter the material properties of a polymer. The introduction of covalent bonds between individual polymer chains creates 3D macromolecular assemblies with enhanced mechanical properties and greater chemical or thermal tolerances. In contrast to many chemical cross-linking reactions, which are the basis of thermoset plastics, enzyme catalysed processes offer a complimentary paradigm for the assembly of cross-linked polymer networks through their predictability and high levels of control. Additionally, enzyme catalysed reactions offer an inherently 'greener' and more biocompatible approach to covalent bond formation, which could include the use of aqueous solvents, ambient temperatures, and heavy metal-free reagents. Here, we review recent progress in the development of biocatalytic methods for polymer cross-linking, with a specific focus on the most promising candidate enzyme classes and their underlying catalytic mechanisms. We also provide exemplars of the use of enzyme catalysed cross-linking reactions in industrially relevant applications, noting the limitations of these approaches and outlining strategies to mitigate reported deficiencies.

Dynamic crosslinked and injectable biohydrogels as extracellular matrix mimics for the delivery of antibiotics and 3D cell culture

Antibiotics are widely used in clinical medicine. As an important member, vancomycin often plays an irreplaceable role in some serious infections but for its use, there is still a lack of suitable carriers and effective formulations. To find a vancomycin carrier with potential for clinical applications, a new class of poly(γ-glutamic acid)/dextran-based injectable hydrogels have been constructed through dynamic covalent hydrazone linkages. Adipic dihydrazide (ADH)-grafted poly(γ-glutamic acid) (PGAADH) and sodium periodate-oxidized dextran (OD) precursors were synthesized; then, the hydrogels were formed by blending PGAADH and OD buffer solutions without any additives under physiological conditions. The newly formed precursor structures, mechanical properties, morphologies, hydrogel degradation profiles, and the interaction between the drug and precursors were investigated with FTIR spectroscopy, 1H NMR spectroscopy, rheological experiments, compression tests, SEM, and isothermal titration calorimetric (ITC) measurements. The resulting hydrogels exhibited excellent antibacterial ability and ideal variable performances. Moreover, the hydrogels exhibited different drug release kinetics and mechanisms and were applied effectively towards the controlled release of vancomycin. Significantly, benefitting from the reversibly cross-linked systems and the excellent biocompatibility, the hydrogels can work as the ideal material for HeLa cell culture, leading to encapsulated cells with higher viability and capacity that is proliferative. Therefore, the injectable PGAADH/OD hydrogels demonstrated attractive properties for future applications in pharmaceutics and tissue engineering.

Enzymatic outside-in cross-linking enables single-step microcapsule production for high-throughput three-dimensional cell microaggregate formation

Cell-laden hydrogel microcapsules enable the high-throughput production of cell aggregates, which are relevant for three-dimensional tissue engineering and drug screening applications. However, current microcapsule production strategies are limited by their throughput, multistep protocols, and limited amount of compatible biomaterials. We here present a single-step process for the controlled microfluidic production of single-core microcapsules using enzymatic outside-in cross-linking of tyramine-conjugated polymers. It was hypothesized that a physically, instead of the conventionally explored biochemically, controlled enzymatic cross-linking process would improve the reproducibility, operational window, and throughput of shell formation. Droplets were flown through a silicone delay line, which allowed for highly controlled diffusion of the enzymatic cross-linking initiator. The microcapsules' cross-linking density and shell thickness is strictly depended on the droplet's retention time in the delay line, which is predictably controlled by flow rate. The here presented hydrogel cross-linking method allows for facile and cytocompatible production of cell-laden microcapsules compatible with the formation and biorthogonal isolation of long-term viable cellular spheroids for tissue engineering and drug screening applications.

Enzymatically crosslinked silk and silk-gelatin hydrogels with tunable gelation kinetics, mechanical properties and bioactivity for cell culture and encapsulation

Silk fibroin (SF) was enzymatically crosslinked with tyramine-substituted silk fibroin (SF-TA) or gelatin (G-TA) to fabricate hybrid hydrogels with tunable gelation kinetics, mechanical properties and bioactivity. Horseradish peroxidase (HRP)/hydrogen peroxide (H2O2) mediated crosslinking of SF in physiological buffers results in slow gelation and limited mechanical properties. Moreover, SF lacks cell attachment sequences, leading to poor cell-material interactions. These shortcomings can limit the uses of enzymatically crosslinked silk hydrogels in injectable tissue fillings, 3D bioprinting or cell microencapsulation, where rapid gelation and high bioactivity are desired. Here SF/SF-TA and SF/G-TA composite hydrogels were characterized for hydrogel properties and the influence of conjugated cyclic arginine-glycine-aspartic acid (RGD) peptide or G-TA content on bioactivity was explored. Both SF-TA and G-TA significantly increased gelation kinetics, improved mechanical properties and delayed enzymatic degradation in a concentration-dependent manner. β-Sheet formation and hydrogel stiffening were accelerated by SF-TA content but delayed by G-TA. Both cyclic RGD and G-TA significantly improved morphology and metabolic activity of human mesenchymal stem cells (hMSCs) cultured on or encapsulated in composite hydrogels. The hydrogel formulations introduced in this study provide improved control of gel formation and properties, along with biocompatible systems that can be utilized in tissue engineering and cell delivery applications.

In situ forming oxidized salecan/gelatin injectable hydrogels for vancomycin delivery and 3D cell culture

Antibiotics are widely used in clinical medicine. As an important member, vancomycin often plays an irreplaceable role in some serious infections, but its use still lacks suitable carriers and effective formulations. In order to find a vancomycin carrier with potential for clinical application, a new class of oxidized salecan/gelatin based injectable hydrogels are constructed through dynamic covalent Schiff base reaction. The sodium periodate oxidized salecan (OS) precursor was synthesized, and then the gelatin/oxidized salecan (GS) hydrogels are formed by blending gelatin and OS buffer solutions without any additives under physiological condition. The chemical structure, as well as internal morphologies, mechanical properties, In vitro enzymatic degradation profile of hydrogels are investigated with proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), compression test and rheological experiments. The resulted hydrogels exhibit excellent antibacterial ability and variable characteristics. Moreover, the hydrogels display ideal drug release kinetics and mechanisms, and are applied successfully to the controlled release of vancomycin. Importantly, benefitting from the excellent biocompatibility and the reversibly crosslinked networks, GS hydrogels can function as suitable three dimensional (3D) extracellular matrix for HeLa cells, leading to the encapsulated cells maintaining a high viability and proliferative capacity. Therefore, the injectable GS hydrogels demonstrated attractive properties for future application in pharmaceutics and tissue engineering.

An injectable heparin-conjugated hyaluronan scaffold for local delivery of transforming growth factor β1 promotes successful chondrogenesis

Cartilage lacks basic repair mechanisms and thus surgical interventions are necessary to treat lesions. Minimally-invasive arthroscopic procedures require the development of injectable biomaterials to support chondrogenesis of implanted cells. However, most cartilage tissue engineering approaches rely on pre-culture of scaffolds in media containing growth factors (GFs) such as transforming growth factor (TGF)-β1, which are crucial for cartilage formation and homeostasis. GFs media-supplementation is incompatible with injectable approaches and has led to a knowledge gap about optimal dose of GFs and release profiles needed to achieve chondrogenesis. This study aims to determine the optimal loading and release kinetics of TGF-β1 bound to an engineered GAG hydrogel to promote optimal cartilaginous matrix production in absence of TGF-β1 media-supplementation. We show that heparin, a GAG known to bind a wide range of GFs, covalently conjugated to a hyaluronan hydrogel, leads to a sustained release of TGF-β1. Using this heparin-conjugated hyaluronan hydrogel, 0.25 to 50 ng TGF-β1 per scaffold was loaded and cell viability, proliferation and cartilaginous matrix deposition of the encapsulated chondroprogenitor cells were measured. Excellent chondrogenesis was found when 5 ng TGF-β1 per scaffold and higher were used. We also demonstrate the necessity of a sustained release of TGF-β1, as no matrix deposition is observed upon a burst release. In conclusion, our biomaterial loaded with an optimal initial dose of 5 ng/scaffold TGF-β1 is a promising injectable material for cartilage repair, with potentially increased safety due to the low, locally administered GF dose. STATEMENT OF SIGNIFICANCE: Cartilage cell-based products are dependent on exogenous growth factor supplementation in order for proper tissue maturation. However, for a one-step repair of defects without need for expensive tissue maturation, an injectable, growth factor loaded formulation is required. Here we show development of an injectable hyaluronan hydrogel, which achieves a sustained release of TGF-β1 due to covalent conjugation of heparin. These grafts matured into cartilaginous tissue in the absence of growth factor supplementation. Additionally, this system allowed us to screen TGF-β1 concentrations to determine the mimimum amount of growth factor required for chondrogenesis. This study represents a critical step towards development of a minimally-invasive, arthroscopic treatment for cartilage lesions.

Functionalization of Novel Theranostic Hydrogels with Kartogenin-Grafted USPIO Nanoparticles To Enhance Cartilage Regeneration

Here, kartogenin (KGN), an emerging stable nonprotein compound with the ability to promote differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) into chondrocytes, was grafted onto the surface of modified ultrasmall superparamagnetic iron-oxide (USPIO) and then integrated into cellulose nanocrystal/dextran hydrogels. The hydrogels served as a carrier for the USPIO-KGN and a matrix for cartilage repair. We carried out in vitro and in vivo studies, the results of which demonstrated that KGN undergoes long-term stable sustained release, recruits endogenous host cells, and induces BMSCs to differentiate into chondrocytes, thus enabling in situ cartilage regeneration. Meanwhile, the USPIO-incorporated theranostic hydrogels exhibited a distinct magnetic resonance contrast enhancement and maintained a stable relaxation rate, with almost no loss, both in vivo and in vitro. According to noninvasive in vivo observation results and immunohistochemistry analyses, the regenerated cartilage tissue was very similar to natural hyaline cartilage. This innovative diagnosis and treatment system increases the convenience and effectiveness of chondrogenesis.

Advances in crosslinking strategies of biomedical hydrogels

Biomedical hydrogels as sole repair matrices or combined with pre-seeded cells and bioactive growth factors are extensively applied in tissue engineering and regenerative medicine. Hydrogels normally provide three dimensional structures for cell adhesion and proliferation or the controlled release of the loading of drugs or proteins. Various physiochemical properties of hydrogels endow them with distinct applications. In this review, we present the commonly used crosslinking method for hydrogel synthesis involving physical and chemical crosslinks and summarize their current progress and future perspectives.

Osteochondral Tissue Regeneration Using a Tyramine-Modified Bilayered PLGA Scaffold Combined with Articular Chondrocytes in a Porcine Model

Repairing damaged articular cartilage is challenging due to the limited regenerative capacity of hyaline cartilage. In this study, we fabricated a bilayered poly (lactic-co-glycolic acid) (PLGA) scaffold with small (200–300 μm) and large (200–500 μm) pores by salt leaching to stimulate chondrocyte differentiation, cartilage formation, and endochondral ossification. The scaffold surface was treated with tyramine to promote scaffold integration into native tissue. Porcine chondrocytes retained a round shape during differentiation when grown on the small pore size scaffold, and had a fibroblast-like morphology during transdifferentiation in the large pore size scaffold after five days of culture. Tyramine-treated scaffolds with mixed pore sizes seeded with chondrocytes were pressed into three-mm porcine osteochondral defects; tyramine treatment enhanced the adhesion of the small pore size scaffold to osteochondral tissue and increased glycosaminoglycan and collagen type II (Col II) contents, while reducing collagen type X (Col X) production in the cartilage layer. Col X content was higher for scaffolds with a large pore size, which was accompanied by the enhanced generation of subchondral bone. Thus, chondrocytes seeded in tyramine-treated bilayered scaffolds with small and large pores in the upper and lower parts, respectively, can promote osteochondral regeneration and integration for articular cartilage repair.

Enhancement of human adipose-derived stem cell spheroid differentiation in an in situ enzyme-crosslinked gelatin hydrogel

Standardized human adipose-derived stem cell spheroids can be harvested abundantly and the differentiation capability of cell spheroids performed well in the enzyme-crosslinked gelatin hydrogel.

Preparation and in vitro characterization of cross-linked collagen-gelatin hydrogel using EDC/NHS for corneal tissue engineering applications

Corneal disease is considered as the second leading cause of vision loss and keratoplasty is known as an effective treatment for it. However, the tissue engineered corneal substitutes are promising tools in experimental in vivo repair of cornea. Selecting appropriate cell sources and scaffolds are two important concerns in corneal tissue engineering. The object of this study was to investigate biocompatibility and physical properties of the bio-engineered cornea, fabricated from type-I collagen (COL) and gelatin (Gel). Two gelatin based hydrogels cross-linked with EDC/NHS were fabricated, and their physicochemical properties such as equilibrium water content, enzymatic degradation, mechanical properties, rheological, contact angle and optical properties as well as their ability to support human bone-marrow mesenchymal stem cells (hBM-MSCs) survival were characterized. The equilibrium water content and enzymatic degradation of these hydrogels can be easily controlled by adding COL. Our findings suggest that incorporation of COL-I increases optical properties, hydrophilicity, stiffness and Young's modulus. The viability of hBM-MSCs cultured in Gel and Gel: COL was assessed via CCK-8 assay. Also, the morphology of the hBM-MSCs on the top of Gel and Gel: COL hydrogels were characterized by phase-contrast microscopy. This biocompatible hydrogel may promise to be used as artificial corneal substitutes.

Injectable Biomaterials in Plastic and Reconstructive Surgery: A Review of the Current Status

BACKGROUND

Injectable biomaterials have attracted increasing attention for volume restoration and tissue regeneration. The main aim of this review is to discuss the current status of the injectable biomaterials for correction of tissue defects in plastic and reconstructive surgery.

METHODS

Requirements of injectable biomaterials, mechanism of in situ gelation, characteristics, and the combinational usage of adipose-derived stem cells (ADSCs) and growth factors were reviewed.

RESULTS

The ideal injectable biomaterials should be biocompatible, non-toxic, easy to use, and cost-effective. Additionally, it should possess adequate mechanical properties and stability. In situ gelation method includes physical, chemical, enzymatic and photo-initiated methods. Natural and synthetic biomaterials carry their pros and cons due to their inherent properties. The combined use of ADSCs and growth factors provides enhanced potential for adipose tissue regeneration.

CONCLUSIONS

The usage of injectable biomaterials has been increasing for the tissue restoration and regeneration. The future of incorporating ADSCs and growth factors into the injectable biomaterials is promising.

Injectable hydrogels: a new paradigm for osteochondral tissue engineering

Osteochondral tissue engineering has become a promising strategy for repairing focal chondral lesions and early osteoarthritis (OA), which account for progressive joint pain and disability in millions of people worldwide. Towards improving osteochondral tissue repair, injectable hydrogels have emerged as promising matrices due to their wider range of properties such as their high water content and porous framework, similarity to the natural extracellular matrix (ECM), ability to encapsulate cells within the matrix and ability to provide biological cues for cellular differentiation. Further, their properties such as those that facilitate minimally invasive deployment or delivery, and their ability to repair geometrically complex irregular defects have been critical for their success. In this review, we provide an overview of innovative approaches to engineer injectable hydrogels towards improved osteochondral tissue repair. Herein, we focus on understanding the biology of osteochondral tissue and osteoarthritis along with the need for injectable hydrogels in osteochondral tissue engineering. Furthermore, we discuss in detail different biomaterials (natural and synthetic) and various advanced fabrication methods being employed for the development of injectable hydrogels in osteochondral repair. In addition, in vitro and in vivo applications of developed injectable hydrogels for osteochondral tissue engineering are also reviewed. Finally, conclusions and future perspectives of using injectable hydrogels in osteochondral tissue engineering are provided.

Mussel-Inspired Tissue-Adhesive Hydrogel Based on the Polydopamine-Chondroitin Sulfate Complex for Growth-Factor-Free Cartilage Regeneration

Glycosaminoglycan-based hydrogels are widely used for cartilage repair because glycosaminoglycans are the main component of the cartilage extracellular matrix and can maintain chondrocyte functions. However, most of the glycosaminoglycan-based hydrogels are negatively charged and cell-repellant, and they cannot host cells or favor tissue regeneration. Inspired by mussel chemistry, we designed a polydopamine-chondroitin sulfate-polyacrylamide (PDA-CS-PAM) hydrogel with tissue adhesiveness and super mechanical properties for growth-factor-free cartilage regeneration. Thanks to the abundant reactive catechol groups on the PDA, a cartilage-specific PDA-CS complex was formed by the self-assembly of PDA and CS, and then the PDA-CS complex was homogenously incorporated into an elastic hydrogel network. This catechol-group-enriched PDA-CS complex endowed the hydrogel with good cell affinity and tissue adhesiveness to facilitate cell adhesion and tissue integration. Compared with bare CS, the PDA-CS complex in the hydrogel was more effective in exerting its functions on adhered cells to upregulate chondrogenic differentiation. Because of the synergistic effects of noncovalent interactions caused by the PDA-CS complex and covalently cross-linked PAM network, the hydrogel exhibited super resilience and toughness, meeting the mechanical requirement of cartilage repair. Collectively, this tissue-adhesive and tough PDA-CS-PAM hydrogel with good cell affinity creates a growth-factor-free and biomimetic microenvironment for chondrocyte growth and cartilage regeneration and sheds light on the development of growth-factor-free biomaterials for cartilage repair.