Development and in vivo characterization of a novel peptide drug delivery system providing extended plasma half life

Discovery of the GSH responsive "Y-PROTACs" targeting ALK and CDK4/6 as a potential treatment for cancer

Combination of different molecular target inhibitors is an available method to improve the therapeutic effect on tumors. Herein, to achieve both tumor cell targeting and ALK degradation & CDK4/6 inhibition in one molecule, we designed and synthesized a novel GSH responsive "Y-PROTACs", Y5-3, a highly potent molecule with an IC₅₀ value of 90 nM against H3122 cells, which can be cleaved into ALK PROTAC and CDK4/6 inhibitor moieties in tumor cells. Mechanism studies revealed that Y5-3 exert anti-tumor proliferation activity in vitro not only by ALK degradation and CDK4/6 inhibition, but also by ALK/CDK4 dual degradation. These properties make Y5-3 a GSH responsive multifunctional antitumor agent, and our work provide a new strategy for the development of multifunctional PROTACs.

Synthesis, characterization and evaluation of hyaluronic acid-based polymers for nasal delivery

Epidemiological research has found that between 5 and 12 percent of the population suffers from chronic rhinosinusitis. Patients are dealing with local side effects such as nasal dryness, sporadic sneezing, and nasal pain in addition to the inflammation. The aim of this study was to synthesize a polymer based on hyaluronic acid in order to provide lubrication combined with a ligand leading to a covalent binding on the nasal mucosa. Hyaluronic acid (HA) was modified with L-cysteine ethyl ester hydrochloride (CYS) via amid bond formation. Ellman's assay, together with spectroscopic techniques like IR and ¹H NMR, confirmed that HACys had been successfully synthesized. It was demonstrated that HACys is safe for administration on the nasal mucosa. The mucoadhesive potential was determined by 3.26-fold with the rotating cylinder assay and 1.4-fold in terms of bioadhesive examination, respectively. Further, the stability of the modified polymer was improved by 7.6-fold compared to the unmodified polymer. Spraying the formulation on the nasal mucosa, the residence time of a model drug was 1.74-fold prolonged at the site of action compared to unmodified polymer. In light of these findings, modified hyaluronic acid (HACys) displayed compelling properties such as lubricity, targeted application, long-lasting effect, and safety and therefore could be an excellent candidate for nasal application.

Cleavage-Responsive Biofactory T Cells Suppress Infectious Diseases-Associated Hypercytokinemia

Severe infectious diseases, such as coronavirus disease 2019 (COVID-19), can induce hypercytokinemia and multiple organ failure. In spite of the growing demand for peptide therapeutics against infectious diseases, current small molecule-based strategies still require frequent administration due to limited half-life and enzymatic digestion in blood. To overcome this challenge, a strategy to continuously express multi-level therapeutic peptide drugs on the surface of immune cells, is established. Here, chimeric T cells stably expressing therapeutic peptides are presented for treatment of severe infectious diseases. Using lentiviral system, T cells are engineered to express multi-level therapeutic peptides with matrix metallopeptidases- (MMP-) and tumor necrosis factor alpha converting enzyme- (TACE-) responsive cleavage sites on the surface. The enzymatic cleavage releases γ-carboxyglutamic acid of protein C (PC-Gla) domain and thrombin receptor agonist peptide (TRAP), which activate endothelial protein C receptor (EPCR) and protease-activated receptor-1 (PAR-1), respectively. These chimeric T cells prevent vascular damage in tissue-engineered blood vessel and suppress hypercytokinemia and lung tissue damages in vivo, demonstrating promise for use of engineered T cells against sepsis and other infectious-related diseases.

The gelation behavior of thiolated citrus high-methoxyl pectin induced by sodium phosphate dibasic dodecahydrate

The present study found that sodium phosphate dibasic dodecahydrate (Na₂HPO₄) was capable of inducing the gelation of thiolated citrus high-methoxyl pectin (TCHMP). TCHMP was synthesized by amidation of citrus high-methoxyl pectin. The gel formation exhibited an obvious concentration-dependence, including TCHMP and Na₂HPO₄ concentration. For Na₂HPO₄-induced TCHMP gels (TCHMPGs), gel strength and water holding capacity (WHC) increased, while the microcellular network structure was more compact with the increase of TCHMP and Na₂HPO₄ concentration. Dynamic viscoelastic experiment showed when Na₂HPO₄ concentration was more than or equal to 0.5 mol/L, TCHMP sols could be transferred into gels within 30 min. Crystal property was not changed while thermal stability was improved after phase transition. Gelling forces analysis indicated that disulfide bonds were the main interaction forces in TCHMPGs. Consequently, TCHMPGs were covalently crosslinked and exhibited satisfactory gel performance. The results provide a theoretical basis for the formation of gels by Na₂HPO₄ induced TCHMP.

Synthesis, cytotoxicity assay, pharmacokinetics, biodistribution and modeling study of cabazitaxel-dextran nanoconjugates: targeted vs non targeted delivery

Cabazitaxel (CTX) is an anti-neoplastic agent of second-generation taxane derivatives, characterized by very low water solubility. The currently marketed formulation of CTX contains high concentrations of surfactant and ethanol, which causes severe hypersensitivity reactions in patients. To deal with aforementioned side effects, our previous study attempted to develop the prodrugs of CTX with dextran. Here our approach differs through synthesizing folate containing prodrug and also investigating cytotoxicity and pharmacokinetics parameters obtained with dextran and dextran-folate nanoconjugates versus free CTX. MCF-7 with medium folate receptor expression and MDA-MB-231 as high folate receptor expression cell lines were selected for cytotoxicity assay. Pharmacokinetics properties were studied by injecting prodrugs and CTX to Wistar rats, analyzing serum and selected tissue samples and the obtained results were sibjected to data modeling study. The size of synthesized prodrugs was mostly less than 90 nm. Folate conjugates provided higher toxicity in comparison with dextran conjugates on both cell lines. In vivo non-compartmental pharmacokinetics analysis revealed enhanced area under the curve (about 3-5 fold for different samples) and longer half-life (approximately 1.3-1.8 fold higher) which led to increased serum residence time of prodrugs in comparison to free CTX. Tissue accumulation data showed that liver was the major organ with high accumulation of CTX. The accumulation of folate conjugates was remarkably higher than dextran samples (p < 0.05 in samples of 2, 10 and 24 h). Data modeling by Principal Component Analysis (PCA) and Hierarchical Cluster models showed a significant difference between pharmacokinetics properties of CTX and prodrugs. In summary, prodrugs seem to be proper and promising CTX delivery systems as substitution for the current market formulation.

Thiolated polymers: Bioinspired polymers utilizing one of the most important bridging structures in nature

Thiolated polymers designated "thiomers" are obtained by covalent attachment of thiol functionalities on the polymeric backbone of polymers. In 1998 these polymers were first described as mucoadhesive and in situ gelling compounds forming disulfide bonds with cysteine-rich substructures of mucus glycoproteins and crosslinking through inter- and intrachain disulfide bond formation. In the following, it was shown that thiomers are able to form disulfides with keratins and membrane-associated proteins exhibiting also cysteine-rich substructures. Furthermore, permeation enhancing, enzyme inhibiting and efflux pump inhibiting properties were demonstrated. Because of these capabilities thiomers are promising tools for drug delivery guaranteeing a strongly prolonged residence time as well as sustained release on mucosal membranes. Apart from that, thiomers are used as drugs per se. In particular, for treatment of dry eye syndrome various thiolated polymers are in development and a first product has already reached the market. Within this review an overview about the thiomer-technology and its potential for different applications is provided discussing especially the outcome of studies in non-rodent animal models and that of numerous clinical trials. Moreover, an overview on product developments is given.

Improvements in chemical carriers of proteins and peptides

The successful intracellular delivery of biologically active proteins and peptides plays an important role for therapeutic applications. Indeed, protein/peptide delivery could overcome some problems of gene therapy, for example, controlling the expression levels and the integration of transgene into the host cell genome. Thus, protein/peptide drug delivery showed a promising and safe approach for treatment of cancer and infectious diseases. Due to the unique physical and chemical properties of proteins, their production (e.g., isolation, purification & formulation) and delivery represented significant challenges in pharmaceutical studies. Modification in the structural moieties of these protein/peptide drugs could improve their solubility, stability, crystallinity, lipophilicity, enzymatic susceptibility and targetability, and subsequently, therapies and cures against various diseases. Using the structural modification of protein/peptide, their delivery provided overall higher success rates including high specificity, high activity, bioreactivity and safety. Recently, biotechnological and pharmaceutical companies have tried to find novel techniques for the modifications and improve delivery systems/carriers. However, each carrier has its own benefits and drawbacks, and an appropriate carrier is often established by the physicochemical properties of protein or peptide, the ideal route of injection, and clinical characteristics of therapy. In this review, an attempt was made to give an overview on the chemical carriers for proteins and peptides as well as the recent advances in this field.

Glutathione responsive chitosan-thiolated dextran conjugated miR-145 nanoparticles targeted with AS1411 aptamer for cancer treatment

miR-145 is a tumor suppressive miRNA which is abnormally reduced in different cancers. miR-145 overexpression reduces cancer migration, invasion, and cell adhesion. Increasing miR-145 level using suitable and efficient gene delivery systems could be valuable in cancer treatment. In this study, a redox-responsive miR-145 conjugated thiolated dextran (TD-miR) was prepared. Also, polyelectrolyte complexes (PECs) of TD-miR and chitosan were fabricated and decorated with anti nucleolin aptamer, AS1411 (apt-PEC). The size of the PECs was between 40-270 nm, and the zeta potential was varied according to the TD-miR to chitosan molar ratio. The outcomes of cellular studies indicated the excellence of the apt-PEC as a duel targeted delivery system and the PECs composed of chitosan 18 kDa with TD-miR to chitosan ratio of 5. TD-miR and the PECs are appropriate as the smart gene delivery systems which preserve and transfect the cargo and release it in cytoplasm.

Thiolated citrus low-methoxyl pectin: Synthesis, characterization and rheological and oxidation-responsive gelling properties

In the present study, citrus low-methoxyl pectin was modified by conjugating cysteine via amide bonds, and the resultant polymer (CYS-PEC) was characterized. CYS-PEC conjugates with thiol contents varying from 77.8μmol/g to 296μmol/g were synthesized, and the successful conjugation was evidenced by elemental, and FT-IR analyses. The sulfur in CYS-PEC is predominately in the thiol form, with a minor fraction forming disulfide bonds (∼15%), which occur when thiol/disulfide interchange interrupts the intended thiolation. Both native and modified pectin dispersions exhibited strong pseudoplastic properties, and the frequency sweeps revealed them to be dispersions containing microgel particles. Dynamic viscoelastic analysis was used to determine the oxidation-response gelling capacities of polymer dispersions containing H₂O₂, especially those that are highly thiolated and have cross-linked gel properties. For oxidation-induced CYS-PEC gels, their gelation time, hardness, viscosity and elastic moduli and swelling-disintegration ratio are dependent on the thiol group content, H₂O₂ concentration and polymer concentration.

Novel delivery systems for improving the clinical use of peptides

Peptides have long been recognized as a promising group of therapeutic substances to treat various diseases. Delivery systems for peptides have been under development since the discovery of insulin for the treatment of diabetes. The challenge of using peptides as drugs arises from their poor bioavailability resulting from the low permeability of biological membranes and their instability. Currently, subcutaneous injection is clinically the most common administration route for peptides. This route is cost-effective and suitable for self-administration, and the development of appropriate dosing equipment has made performing the repeated injections relatively easy; however, only few clinical subcutaneous peptide delivery systems provide sustained peptide release. As a result, frequent injections are needed, which may cause discomfort and additional risks resulting from a poor administration technique. Controlled peptide delivery systems, able to provide required therapeutic plasma concentrations over an extended period, are needed to increase peptide safety and patient compliancy. In this review, we summarize the current peptidergic drugs, future developments, and parenteral peptide delivery systems. Special emphasis is given to porous silicon, a novel material in peptide delivery. Biodegradable and biocompatible porous silicon possesses some unique properties, such as the ability to carry exceptional high peptide payloads and to modify peptide release extensively. We have successfully developed porous silicon as a carrier material for improved parenteral peptide delivery. Nanotechnology, with its different delivery systems, will enable better use of peptides in several therapeutic applications in the near future.

Bioresponsive polymer-based nucleic acid carriers

Nucleic acid carriers need to possess multifunctionality for overcoming biological barriers, such as the stable encapsulation of nucleic acids in extracellular milieu, internalization by target cells, controlled intracellular distribution, and release of nucleic acids at the target site of action. To fulfill these stepwise functionalities, "bioresponsive" polymers that can alter their structure responding to site-specific biological signals are highly useful. Notably, pH, redox potential, and enzymatic activities vary along with microenvironments in the body, and thus, the responsiveness to these signals enables to construct nucleic acid carriers with programmed functionalities. This chapter describes the design of bioresponsive polymers that respond to various biological microenvironments for smart nucleic acids delivery.

Evaluation of functional characteristics of preactivated thiolated chitosan as potential therapeutic agent for dry mouth syndrome

PURPOSE

The objective of this study was to investigate preactivated thiomers for their potential in the treatment of dry mouth syndrome.

METHODS

Chitosan-thioglycolic-mercaptonicotinamide conjugates (chitosan-TGA-MNA) were synthesized by the oxidative S-S coupling of chitosan-thioglycolic acid (chitosan-TGA) with 6-mercaptonicotinamide (MNA). Test disks were compressed out of unmodified chitosan, chitosan-TGA (thiomers) and chitosan-TGA-MNA conjugates to investigate cohesive properties, cytotoxicity assays and mucoadhesion studies.

RESULTS

Immobilizing the MNA achieved higher swelling and cohesive properties of chitosan-TGA-MNA conjugates compared to unmodified chitosan. Rotating cylinder studies displayed a 3.1-fold improvement of mucoadhesiveness of chitosan-TGA-MNA conjugates compared to thiolated polymers. Findings in tensile strength were in good agreement with rotating cylinder ones. Furthermore, preactivated thiomers exhibit higher stability. All conjugates were found non-toxic against Caco-2 cells.

CONCLUSION

Preactivated thiolated chitosan could be a promising system for the treatment of dry mouth syndrome where mucosa requires lubrication and mucoadhesiveness.

Enhancement of anti-tumor activity of hybrid peptide in conjugation with carboxymethyl dextran via disulfide linkers

To improve the anti-tumor activity of EGFR2R-lytic hybrid peptide, we prepared peptide-modified dextran conjugates with the disulfide bonds between thiolated carboxymethyl dextran (CMD-Cys) and cysteine-conjugated peptide (EGFR2R-lytic-Cys). In vitro release studies showed that the peptide was released from the CMD-s-s-peptide conjugate in a concentration-dependent manner in the presence of glutathione (GSH, 2μM-2mM). The CMD-s-s-peptide conjugate exhibited a similar cytotoxic activity with free peptide alone against human pancreatic cancer BxPC-3 cells in vitro. Furthermore, it was shown that the CMD-s-s-peptide conjugates were highly accumulated in tumor tissue in a mouse xenograft model using BxPC-3 cells, and the anti-tumor activity of the conjugate was more effective than that of the free peptide. In addition, the plasma concentrations of peptide were moderately increased and the elimination half-life of the peptide was prolonged after intravenous injection of CMD-s-s-peptide conjugates. These results demonstrated that the conjugate based on thiolated CMD polymer would be potentially useful carriers for the sustained release of the hybrid peptide in vivo.

Custom cerium oxide nanoparticles protect against a free radical mediated autoimmune degenerative disease in the brain

Cerium oxide nanoparticles are potent antioxidants, based on their ability to either donate or receive electrons as they alternate between the +3 and +4 valence states. The dual oxidation state of ceria has made it an ideal catalyst in industrial applications, and more recently, nanoceria's efficacy in neutralizing biologically generated free radicals has been explored in biological applications. Here, we report the in vivo characteristics of custom-synthesized cerium oxide nanoparticles (CeNPs) in an animal model of immunological and free-radical mediated oxidative injury leading to neurodegenerative disease. The CeNPs are 2.9 nm in diameter, monodispersed and have a -23.5 mV zeta potential when stabilized with citrate/EDTA. This stabilizer coating resists being 'washed' off in physiological salt solutions, and the CeNPs remain monodispersed for long durations in high ionic strength saline. The plasma half-life of the CeNPs is ∼4.0 h, far longer than previously described, stabilized ceria nanoparticles. When administered intravenously to mice, the CeNPs were well tolerated and taken up by the liver and spleen much less than previous nanoceria formulations. The CeNPs were also able to penetrate the brain, reduce reactive oxygen species levels, and alleviate clinical symptoms and motor deficits in mice with a murine model of multiple sclerosis. Thus, CeNPs may be useful in mitigating tissue damage arising from free radical accumulation in biological systems.

Design and in vitro evaluation of a novel polymeric excipient for buccal applications

BACKGROUND

The objective of this study was to develop and evaluate a more effective mucoadhesive thiomer for buccal drug-delivery systems.

METHODS

2-iminothiolane was covalently attached to a chitosan backbone. A preactivation step followed, mediated by 6,6´dithionicotinamide, thiol groups were modified by disulfide bonds formation. Mucoadhesion studies were performed on buccal mucosa. In addition, water-uptake capacity, disintegration, release and cytotoxicity studies were completed.

RESULTS

The obtained chitosan-thiobutylamidine conjugate displayed 647.4 ± 85.23 µmol/g immobilized thiol groups. Due to the preactivation, approximately 60% of thiol groups were modified by formation of disulfide bonds. Chitosan-thiobutylamidine-mercaptonicotinamide displayed 1.8-fold higher stability and 1.6-fold higher mucoadhesive properties, respectively. The release study demonstrated a 1.4-fold more prolonged drug release compared with corresponding thiomers.

CONCLUSION

According to these results, preactivated thiomers demonstrate an improved stability and increased mucoadhesive properties. Therefore, they seem to be advantageous for buccal administration over corresponding thiomers and chitosan.

Thiomers: promising platform for macromolecular drug delivery

The application of macromolecules as therapeutic agents holds great promise for several major disorders such as cancer and cardiovascular disease. However, their use is limited by the lack of efficient, safe and specific delivery strategies. A promising strategy to overcome these challenges might be the use of thiolated polymers or designated thiomers. Thiomers are synthesized by immobilization of sulfhydryl bearing ligands on a polymeric backbone of well-established polymers. These multifunctional polymeric excipients show advantages in mucoadhesion, enzyme and efflux pump inhibition in comparison to unmodified polymers. One obstacle in the use of thiomers is that they are prone to oxidation at lower pH but this could be solved by introducing a completely new generation of thiomers, namely, the preactivated thiomer generation. Preactivated thiomers are mixed disulfides, which exhibit oxidation resistance and, beyond that, improved thiomer features. This review summarizes recent findings of polymeric excipients for macromolecular drug delivery as well as their synthesis and distinctive features.

Impact of physiochemical properties on pharmacokinetics of protein therapeutics

Physicochemical properties, such as molecular weight, size, partition coefficient, acid dissociation constant and solubility have a great impact on pharmacokinetics of traditional small molecule drugs and substantially used in development of small drugs. However, predicting pharmacokinetic fate (absorption, distribution, metabolism and elimination) of protein therapeutics from their physicochemical parameters is extremely difficult due to the macromolecular nature of therapeutic proteins and peptides. Their structural complexity and immunogenicity are other contributing factors that determine their biological fate. Therefore, to develop generalized strategies concerning development of therapeutic proteins and peptides are highly challenging. However, reviewing the literature, authors found that physiochemical properties, such as molecular weight, charge and structural modification are having great impact on pharmacokinetics of protein therapeutics and an attempt is made to provide the major findings in this manuscript. This manuscript will serve to provide some bases for developing protein therapeutics with desired pharmacokinetic profile.

Ceramic nanocarriers: versatile nanosystem for protein and peptide delivery

INTRODUCTION

Proteins and peptides have been established to be the potential drug candidate for various human diseases. But, delivery of these therapeutic protein and peptides is still a challenge due to their several unfavorable properties. Nanotechnology is expanding as a promising tool for the efficient delivery of proteins and peptides. Among numerous nano-based carriers, ceramic nanoparticles have proven themselves as a unique carrier for protein and peptide delivery as they provide a more stable, bioavailable, readily manufacturable, and acceptable proteins and polypeptide formulation.

AREAS COVERED

This article provides an overview of the various aspects of ceramic nanoparticles including their classification, methods of preparation, latest advances, and applications as protein and peptide delivery carriers.

EXPERT OPINION

Ceramic nanocarriers seem to have potential for preserving structural integrity of proteins and peptides, thereby promoting a better therapeutic effect. This approach thus provides pharmaceutical scientists with a new hope for the delivery of proteins and peptides. Still, considerable study on ceramic nanocarrier is necessary with respect to pharmacokinetics, toxicology, and animal studies to confirm their efficiency as well as safety and to establish their clinical usefulness and scale-up to industrial level.