Drug eluting stents: Developments and current status

Targeted Delivery of Nanoparticles to Blood Vessels for the Treatment of Atherosclerosis

Atherosclerosis is a common form of cardiovascular disease, which is one of the most prevalent causes of death worldwide, particularly among older individuals. Surgery is the mainstay of treatment for severe stenotic lesions, though the rate of restenosis remains relatively high. Current medication therapy for atherosclerosis has limited efficacy in reversing the formation of atherosclerotic plaques. The search for new drug treatment options is imminent. Some potent medications have shown surprising therapeutic benefits in inhibiting inflammation and endothelial proliferation in plaques. Unfortunately, their use is restricted due to notable dose-dependent systemic side effects or degradation. Nevertheless, with advances in nanotechnology, an increasing number of nano-related medical applications are emerging, such as nano-drug delivery, nano-imaging, nanorobots, and so forth, which allow for restrictions on the use of novel atherosclerotic drugs to be lifted. This paper reviews new perspectives on the targeted delivery of nanoparticles to blood vessels for the treatment of atherosclerosis in both systemic and local drug delivery. In systemic drug delivery, nanoparticles inhibit drug degradation and reduce systemic toxicity through passive and active pathways. To further enhance the precise release of drugs, the localized delivery of nanoparticles can also be accomplished through blood vessel wall injection or using endovascular interventional devices coated with nanoparticles. Overall, nanotechnology holds boundless potential for the diagnosis and treatment of atherosclerotic diseases in the future.

Phenotypic switching of vascular smooth muscle cells in atherosclerosis, hypertension, and aortic dissection

Vascular smooth muscle cells (VSMCs) play a critical role in regulating vasotone, and their phenotypic plasticity is a key contributor to the pathogenesis of various vascular diseases. Two main VSMC phenotypes have been well described: contractile and synthetic. Contractile VSMCs are typically found in the tunica media of the vessel wall, and are responsible for regulating vascular tone and diameter. Synthetic VSMCs, on the other hand, are typically found in the tunica intima and adventitia, and are involved in vascular repair and remodeling. Switching between contractile and synthetic phenotypes occurs in response to various insults and stimuli, such as injury or inflammation, and this allows VSMCs to adapt to changing environmental cues and regulate vascular tone, growth, and repair. Furthermore, VSMCs can also switch to osteoblast-like and chondrocyte-like cell phenotypes, which may contribute to vascular calcification and other pathological processes like the formation of atherosclerotic plaques. This provides discusses the mechanisms that regulate VSMC phenotypic switching and its role in the development of vascular diseases. A better understanding of these processes is essential for the development of effective diagnostic and therapeutic strategies.

Coatings for Cardiovascular Stents-An Up-to-Date Review

Cardiovascular diseases (CVDs) increasingly burden health systems and patients worldwide, necessitating the improved awareness of current treatment possibilities and the development of more efficient therapeutic strategies. When plaque deposits narrow the arteries, the standard of care implies the insertion of a stent at the lesion site. The most promising development in cardiovascular stents has been the release of medications from these stents. However, the use of drug-eluting stents (DESs) is still challenged by in-stent restenosis occurrence. DESs' long-term clinical success depends on several parameters, including the degradability of the polymers, drug release profiles, stent platforms, coating polymers, and the metals and their alloys that are employed as metal frames in the stents. Thus, it is critical to investigate new approaches to optimize the most suitable DESs to solve problems with the inflammatory response, delayed endothelialization, and sub-acute stent thrombosis. As certain advancements have been reported in the literature, this review aims to present the latest updates in the coatings field for cardiovascular stents. Specifically, there are described various organic (e.g., synthetic and natural polymer-based coatings, stents coated directly with drugs, and coatings containing endothelial cells) and inorganic (e.g., metallic and nonmetallic materials) stent coating options, aiming to create an updated framework that would serve as an inception point for future research.

In Vitro Targeted Delivery of Simvastatin and Niacin to Macrophages Using Mannan-Grafted Magnetite Nanoparticles

Atherosclerosis, a leading cause of mortality worldwide, involves various subsets of macrophages that contribute to its initiation and progression. Current treatment approaches focus on systemic, long-term administration of cholesterol-lowering antioxidants such as statins and certain vitamins, which unfortunately come with prolonged side effects. To overcome these drawbacks, a mannose-containing magnetic nanoparticle (NP) is introduced as a drug delivery system to specifically target macrophages in vitro using simvastatin or niacin and a combinational therapy approach that reduces local inflammation while avoiding unwanted side effects. The synthesized NPs exhibited superparamagnetic behavior, neutrally charged thin coating with a hydrodynamic size of 77.23 ± 13.90 nm, and a metallic core ranging from 15 to 25 nm. Efficient loading of niacin (87.21%) and simvastatin (75.36%) on the NPs was achieved at respective weights of 20.13 and 5.03 (w/w). In the presence of a mannan hydrolyzing enzyme, 79.51% of simvastatin and 67.23% of niacin were released from the NPs within 90 min, with a leakage rate below 19.22%. Additionally, the coated NPs showed no destructive effect on J774A macrophages up to a concentration of 200 μg/mL. Simvastatin-loaded NPs exhibited a minimal increase in IL-6 expression. The low dosage of simvastatin decreased both IL-6 and ARG1 expressions, while niacin and combined simvastatin/niacin increased the level of ARG1 expression significantly. Toxicity evaluations on human umbilical vein endothelial cells and murine liver cells revealed that free simvastatin administration caused significant toxicity, whereas the encapsulated forms of simvastatin, niacin, and a combination of simvastatin/niacin at equivalent concentrations exhibited no significant toxicity. Hence, the controlled release of the encapsulated form of simvastatin and niacin resulted in the effective modulation of macrophage polarization. The delivery system showed suitability for targeting macrophages to atherosclerotic plaque.

Antistricture Ureteral Stents with a Braided Composite Structure and Surface Modification with Antistenosis Drugs

The present work describes the development of a drug-loaded ureteral stent with antistricture function based on a trilayer design in which the middle layer was braided from biodegradable poly(p-dioxanone) (PDO) monofilament. Antistenosis drugs rapamycin and paclitaxel were loaded into a silk fibroin (SF) solution and coated on the inner and outer layers of the braided PDO stent. The cumulative release of rapamycin and paclitaxel was sustained over 30 days, with a total release above 80%. The drug-loaded ureteral stents inhibited the proliferation of fibroblasts and smooth muscle cells in vitro. Subcutaneous implantation in rats showed that the drug-loaded ureteral stents were biocompatible with durable mechanical properties in vivo, revealing the inhibition of an excessive growth of fibroblasts and excessive deposition of collagen fibers. In conclusion, the dual-drug-loaded biodegradable ureteral stents show the possibility for treatment of ureteral strictures and avoid the occurrence of complications such as inflammation and restricture.

Polyphenol-mediated sandwich-like coating promotes endothelialization and vascular healing

Drug-eluting stents have become one of the most effective methods to treat cardiovascular diseases. However, this therapeutic strategy may lead to thrombosis, stent restenosis, and intimal hyperplasia and prevent re-endothelialization. In this study, we selected 3-aminophenylboronic acid-modified hyaluronic acid and carboxylate chitosan as polyelectrolyte layers and embedded an epigallocatechin-3-gallate-tanshinone IIA sulfonic sodium (EGCG-TSS) complex to develop a sandwich-like layer-by-layer coating. The introduction of a functional molecular EGCG-TSS complex improved not only the biocompatibility of the coating but also its stability by enriching the interaction between the polyelectrolyte coatings through electrostatic interactions, hydrogen bonding, π-π stacking, and covalent bonding. We further elucidated the effectiveness of sandwich-like coatings in regulating the inflammatory response, smooth muscle cell growth behavior, stent thrombosis and restenosis suppression, and vessel re-endothelialization acceleration via in vivo and in vitro. Conclusively, we demonstrated that sandwich-like coating assisted by an EGCG-TSS complex may be an effective surface modification strategy for cardiovascular therapeutic applications.

Cardiovascular Stents: Types and Future Landscape

One of the prominent reasons for mortality and morbidity worldwide is coronary artery disease (CAD), an ailment that manifests itself by the narrowing of the artery with the deposition of plaque. The definitive mode of action for dealing with this condition is using a medical device known as a stent at the affected location. This extremely important tubular equipment helps tremendously with vessel support. It also helps by keeping the path of blood flow clear for the heart muscle masses, its crucial nutrients, and oxygen supply. Several generations of stents have been continuously developed to improve patient outcomes and reduce side effects post-stent implantation. As we move from bare metal stents (BMSs) to drug-eluting stents (DESs) and, more recently, to bioabsorbable stents, the research area continues to develop. The use of this biomedical device has increased the standard of living in many cases; therefore, it is much needed to work on the possible growth areas in the cardiovascular stents and improve them to such an extent that the patients suffering from cardiovascular ailments get to live a comfortable life. Most articles deal with stents that are available for current use and their various types. They also cover the topic of stent optimization, as it is one of the key factors in enhancing stent usability and plays a prominent role in optimizing stent placement in the vessels of the body. To keep in touch with advances in stent technology over the past few decades, this article reviews advances in the devices, working on how available stents can be optimized to create new stents.

Three Dimensional Printing and Its Applications Focusing on Microneedles for Drug Delivery

Microneedles (MNs) are considered to be a novel smart injection system that causes significantly low skin invasion upon puncturing, due to the micron-sized dimensions that pierce into the skin painlessly. This allows transdermal delivery of numerous therapeutic molecules, such as insulin and vaccines. The fabrication of MNs is carried out through conventional old methods such as molding, as well as through newer and more sophisticated technologies, such as three-dimensional (3D) printing, which is considered to be a superior, more accurate, and more time- and production-efficient method than conventional methods. Three-dimensional printing is becoming an innovative method that is used in education through building intricate models, as well as being employed in the synthesis of fabrics, medical devices, medical implants, and orthoses/prostheses. Moreover, it has revolutionary applications in the pharmaceutical, cosmeceutical, and medical fields. Having the capacity to design patient-tailored devices according to their dimensions, along with specified dosage forms, has allowed 3D printing to stand out in the medical field. The different techniques of 3D printing allow for the production of many types of needles with different materials, such as hollow MNs and solid MNs. This review covers the benefits and drawbacks of 3D printing, methods used in 3D printing, types of 3D-printed MNs, characterization of 3D-printed MNs, general applications of 3D printing, and transdermal delivery using 3D-printed MNs.

Development of three-dimensionally printed vascular stents of bioresorbable poly(l-lactide-co-caprolactone)

With the ripening of 3D printing technology and the discovery of a variety of printable materials, 3D-printed vascular stents provide new treatment options for patients with angiocardiopathy. Bioresorbable stent not only combines the advantages of metallic stent and drug-coated balloon, but also avoids the disadvantages of them. 3D printing is also an economical and efficient way to produce stents and makes it possible to construct complex structures. In this study, stents made from poly(l-lactic acid) (PLLA), poly(ε-caprolactone) (PCL) and poly(l-lactide-co-caprolactone) (PLCL) were manufactured by 3D printing and evaluated for radial strength, crystallinity and molecular weight. PLCL copolymerized by different proportions of lactic acid and caprolactone showed different mechanical and degradation properties. This demonstrated the potential of 3D printing as a low-cost and high throughput method for stent manufacturing. The PLLA and PLCL 95/5 stents had similar mechanical properties, whereas PLCL 85/15 and PCL stents both had relatively low radial strength. In general, PLCL 95/5 had a faster degradation rate than PLLA. These two materials were made into peripheral vascular bioresorbable scaffolds (BRS) and further studied by additional bench testing. PLCL 95/5 peripheral BRS had superior mechanical properties in terms of flexural/bending fatigue and compression resistance.

Evaluation of coronary stents: A review of types, materials, processing techniques, design, and problems

In the world, one of the leading causes of death is coronary artery disease (CAD). There are several ways to treat this disease, and stenting is currently the most appropriate way in many cases. Nowadays, the use of stents has rapidly increased, and they have been introduced in various models, with different geometries and materials. To select the most appropriate stent required, it is necessary to have an analysis of the mechanical behavior of various types of stents. The purpose of this article is to provide a complete overview of advanced research in the field of stents and to discuss and conclude important studies on different topics in the field of stents. In this review, we introduce the types of coronary stents, materials, stent processing technique, stent design, classification of stents based on the mechanism of expansion, and problems and complications of stents. In this article, by reviewing the biomechanical studies conducted in this field and collecting and classifying their results, a useful set of information has been presented to continue research in the direction of designing and manufacturing more efficient stents, although the clinical-engineering field still needs to continue research to optimize the design and construction. The optimum design of stents in the future is possible by simulation and using numerical methods and adequate knowledge of stent and artery biomechanics.

Endogenous stimulus-responsive nitric oxide releasing bioactive liposome for a multilayered drug-eluting balloon

Drug-eluting balloon (DEB) system has been widely utilized for percutaneous coronary intervention (PCI), treating atherosclerosis to overcome the limitations of cardiovascular stents. With the anti-proliferative drug, everolimus (EVL), nitric oxide (NO) plays a key bioregulator role to facilitate the angiogenesis of endothelial cells (ECs) and inhibit the cell proliferation of smooth muscle cells (SMCs) in the lesions of cardiovascular diseases. Due to the very short lifetime and limited exposure area of NO in the body, the continuous release and efficient delivery of NO must be carefully considered. In this respect, a liposome-containing disulfide bonding group was introduced as a delivery vehicle of EVL and NO with the continuous release of NO via successive reaction cycles with GSH and SNAP in the blood vessel without the need for exogenous stimulations. With a multilayer coating platform consisting of a polyvinylpyrrolidone (PVP)/EVL-laden liposome with NO (EVL-NO-Lipo)/PVP, we precluded the loss of the EVL-encapsulated liposome with NO release during the transition time and maximized the transfer rate from the surface of DEB to the tissues. The sustained release of NO was monitored using a nitric oxide analyzer (NOA), and the synergistic bioactivities of EVL and NO were proved in EC and SMC with angiogenesis and cell proliferation-related assays. From the results of hemocompatibility and ex vivo studies, the feasibility was provided for future in vivo applications of the multilayer-coated DEB system.

Reduced restenosis and enhanced re-endothelialization of functional biodegradable vascular scaffolds by everolimus and magnesium hydroxide

BACKGROUND

Coronary artery disease is a cardiovascular disease with a high mortality and mortality rate in modern society. Vascular stent insertion to restore blood flow is essential to treat this disease. A fully biodegradable vascular scaffold (BVS) is a vascular poly (L-lactic acid) (PLLA) stent that is receiving growing interest as this is biodegradable in the body and does not require secondary removal surgery. However, acidic byproducts composed of PLLA produced during the biodegradation of the BVS can induce an inflammatory response. Magnesium hydroxide, a basic inorganic particle, neutralizes the acidic byproducts of PLLA.  METHODS: In this study, we investigated using a BVS coated with everolimus and surface-modified magnesium hydroxide that suppresses smooth muscle cell proliferation and protects endothelial cells, respectively. The various characteristics of the functional stent were evaluated using in vitro and in vivo analyses.  RESULTS: The BVS was successfully prepared with evenly coated everolimus and surface-modified magnesium hydroxide. A neutral pH value was maintained by magnesium hydroxide during degradation, and everolimus was released for one month. The coated BVS effectively inhibited protein adsorption and platelet adhesion, demonstrating excellent blood compatibility. In vitro analysis showed that BVS protects endothelial cells with magnesium hydroxide and selectively inhibits smooth muscle cell proliferation via everolimus treatment. The functional BVS was inserted into porcine coronary arteries for 28 days, and the results demonstrated that the restenosis and inflammation greatly decreased and re-endothelialization was enhanced as compared to others.

CONCLUSIONS

This study provides new insights into the design of drug-incorporated BVS stent for coronary artery disease.

The endothelium permeability after bioresorbable scaffolds implantation caused by the heterogeneous expression of tight junction proteins

As one of the main functions of vascular endothelial cells, Vascular permeability is determined by four tight junction proteins (TJPs): Zonula Occludens-1 (ZO-1), Claudin-5, Occludin and Tricellulin. The barrier function of blood vessels will be reconstructed after they are damaged by endothelial mechanical injuries caused by vascular interventions. In this study, the effects of balloon expansion (transient mechanical injury) on four TJPs and vascular permeability were compared with those of poly-l-lactic acid bioresorbable scaffolds (BRSs) implantation (continuous mechanical stimulation). We found that BRSs do not affect vascular permeability, while the recovery of vascular barrier function was found to be only related to the mechanical injuries and repair of endothelium. Mechanical stimulation affects and accelerates the recovery process of vascular permeability with the heterogeneous expression levels of TJPs induced after BRSs implantation. Different TJPs have different sensitivity to different loyal mechanical stimuli. ZO-1 is more sensitive to shear stress and tension than to static pressure. Occludin is sensitive to static pressure and shear stress. Tricellulin is more sensitive to tension stretching. Compared with the other three TJPs, Claudin-5 can respond to mechanical stimulation, with relatively low sensitivity, though. This difference in sensitivity determines the heterogeneous expression of TJPs. Mechanical stimulation of different kinds and strengths can also cause different cell morphological changes and inflammatory reactions. As an important element affecting endothelial function, the mechanical factors emerging after BRSs implantation are worthy of more attention.

•

The repair of vascular permeability is directly related to the type of vascular injuries, while BRSs implantation has little effect on vascular permeability.

•

Transient and persistent mechanical stimulation is the main reason to influence the expression of TJPs.

•

Heterogeneous expression of TJPs caused by their different sensitivity to the form of mechanical stimuli.

Development of Innovative Biomaterials and Devices for the Treatment of Cardiovascular Diseases

Cardiovascular diseases have become the leading cause of death worldwide. The increasing burden of cardiovascular diseases has become a major public health problem and how to carry out efficient and reliable treatment of cardiovascular diseases has become an urgent global problem to be solved. Recently, implantable biomaterials and devices, especially minimally invasive interventional ones, such as vascular stents, artificial heart valves, bioprosthetic cardiac occluders, artificial graft cardiac patches, atrial shunts, and injectable hydrogels against heart failure, have become the most effective means in the treatment of cardiovascular diseases. Herein, an overview of the challenges and research frontier of innovative biomaterials and devices for the treatment of cardiovascular diseases is provided, and their future development directions are discussed.

Iron-containing metal-organic framework thin film as a drug delivery system

Selective bulk metal-organic frameworks (MOFs) have exhibited great potential in biomedical applications. However, topical treatments and drug elution coatings will require uniform films as drug delivery systems. This work studies the use of surface supportive MOF thin films for drug loading and releasing. More specifically, we focus on an iron-containing MOF, MIL-88B(Fe), on a COOH-terminated self-assembled monolayer (SAM) modified Au surface for encapsulating ibuprofen as a model drug. A combined experimental and computational approach was employed to study the fabrication of MIL-88B(Fe) film on functionalized Au surfaces. We used several surface characterization techniques, including infrared spectroscopy and scanning electron microscopy, to confirm the chemical composition and morphological changes of the surface after each modification step. The resulting MIL-88B(Fe) thin film was found capable of loading 8.7 wt% of ibuprofen using quartz crystal microbalance analysis. Moreover, we applied cluster simulations to study the binding mechanisms of MIL-88B(Fe) and its interactions with ibuprofen based on the density functional theory (DFT). The unsaturated Fe site was confirmed kinetically more favorable to bind to the COOH-end group on the SAM. Hydrogen bonding and π-CH interactions between ibuprofen and MIL-88B(Fe) promote ibuprofen being retained inside of the cages of MIL-88B(Fe).

Mechanical and hydrodynamic effects of stent expansion in tapered coronary vessels

Percutaneous coronary intervention (PCI) has become the primary treatment for patients with coronary heart disease because of its minimally invasive nature and high efficiency. Anatomical studies have shown that most coronary vessels gradually shrink, and the vessels gradually become thinner from the proximal to the distal end. In this paper, the effects of different stent expansion methods on the mechanical and hemodynamic behaviors of coronary vessels and stents were studied. To perform a structural-mechanical analysis of stent implantation, the coronary vessels with branching vessels and the coronary vessels with large bending curvature are selected. The two characteristic structures are implanted in equal diameter expansion mode and conical expansion mode, and the stress and mechanical behaviors of the coronary vessels and stents are analyzed. The results of the structural-mechanical analysis showed that the mechanical behaviors and fatigue performance of the cobalt-chromium alloy stent were good, and the different expansion modes of the stent had little effect on the fatigue performance of the stent. However, the equal diameter expansion mode increased distal coronary artery stress and the risk of vascular injury. The computational fluid dynamics analysis results showed that different stent expansion methods had varied effects on coronary vessel hemodynamics and that the wall shear stress distribution of conical stent expansion is more uniform compared with equal diameter expansion. Additionally, the vortex phenomenon is not apparent, the blood flow velocity is slightly increased, the hydrodynamic environment is more reasonable, and the risk of coronary artery injury is reduced.

Flexible 3D Nanonetworked Silica Film as a Polymer-Free Drug-Eluting Stent Platform to Effectively Suppress Tissue Hyperplasia in Rat Esophagus

Loading and eluting drugs on self-expandable metallic stents (SEMSs) can be challenging in terms of fabrication, mechanical stability, and therapeutic effects. In this study, a flexible 3D nanonetworked silica film (NSF) capable of withstanding mechanical stress during dynamic expansion is constructed to function as a drug delivery platform on an entire SEMS surface. Despite covering a broad curved area, the synthesized NSF is defect-free and thin enough to increase the stent strut diameter (110 µm) by only 0.4 percent (110.45 µm). The hydrophobic modification of the surface enables loading of 4.7 times the sirolimus (SRL) concentration in NSF than Cypher, polymer-coated commercial stent, which is based on the same thickness of coating layer. Furthermore, SRL-loaded NSF exhibits a twofold delay in release compared to the control group without NSF. The SRL-loaded NSF SEMS significantly suppresses stent-induced tissue hyperplasia than the control SEMS in the rat esophagus (all variables, p < 0.05). Thus, the developed NSF is a promising polymer-free drug delivery platform to efficiently treat esophageal stricture.

A Polyphenol-Network-Mediated Coating Modulates Inflammation and Vascular Healing on Vascular Stents

Localized drug delivery from drug-eluting stents (DESs) to target sites provides therapeutic efficacy with minimal systemic toxicity. However, DESs failure may cause thrombosis, delay arterial healing, and impede re-endothelialization. Bivalirudin (BVLD) and nitric oxide (NO) promote arterial healing. Nevertheless, it is difficult to combine hydrophilic signal molecules with hydrophobic antiproliferative drugs while maintaining their bioactivity. Here, we fabricated a micro- to nanoscale network assembly consisting of copper ion and epigallocatechin gallate (EGCG) via π-π interactions, metal coordination, and oxidative polymerization. The network incorporated rapamycin and immobilized BVLD by the thiol-ene "click" reaction and provided sustained rapamycin and NO release. Unlike rapamycin-eluting stents, those coated with the EGCG-Cu-rapamycin-BVLD complex favored competitive endothelial cell (EC) growth over that of smooth muscle cells, exhibited long-term antithrombotic efficacy, and attenuated the negative impact of rapamycin on the EC. In vivo stent implantation demonstrated that the coating promoted endothelial regeneration and hindered restenosis. Therefore, the polyphenol-network-mediated surface chemistry can be an effective strategy for the engineering of multifunctional surfaces.

Anti-coagulation and anti-hyperplasia coating for retrievable vena cava filters by electrospraying and their performance in vivo

A novel drug eluting retrievable vena cava filter (RVCF) with a heparin-modified poly(ε-caprolactone) (hPCL) coating containing rapamycin was prepared by electrospraying. The in vitro drug release pattern showed that the encapsulated rapamycin in the coating can be sustainably released within one month, whereas activated partial thromboplastin time (APTT) and in vitro cell culture showed that the drug eluting RVCF can effectively extend blood clotting time and inhibit smooth muscle cell (SMC) and endothelial cell (EC) proliferation, respectively. The as-prepared drug eluting RVCF and corresponding commercial RVCF were implanted into the vena cava of sheep. The retrieval operation at a predetermined time point showed that the drug eluting RVCF had a much higher retrieval rate than the commercial RVCF. Comprehensive investigations, including histological, immunohistological and immunofluorescence analyses, on explanted veins were carried out. The results demonstrated that the as-prepared RVCF possessed excellent antihyperplasia properties in vivo, significantly improving the retrieval rate and extending the in vivo dwelling time in sheep. Consequently, the drug eluting RVCF has promising potential for application in the clinic to improve RVCF retrieval rates.

A heparin-functionalized covered stent prepared by plasma technology

In this study, the surface of the covered stent was treated by plasma technology to introduce amino functional groups, and glutaraldehyde and heparin were successfully grafted to prepare a heparin-functionalized covered stent (HPLCS). The preparation parameters such as plasma treatment power, plasma treatment time, concentration of glutaraldehyde and heparin, and pH of heparin solution were studied in detail. The functionalized heparin covered stent can make the titer of heparin reach 1.23 ± 0.03 IU/cm². In animal experiments, after implantation in pigs for 6 months, the titer of heparin can still reach 0.93 ± 0.05 IU/cm². This work provides a good method for preparing heparin covered stent.

Acetazolamide-eluting biodegradable tubular stent prevents pancreaticojejunal anastomotic leakage

Postoperative pancreatic fistula at the early stage can lead to auto-digestion, which may delay the recovery of the pancreaticojejunal (PJ) anastomosis. The efficacy and safety of an acetazolamide-eluting biodegradable tubular stent (AZ-BTS) for the prevention of self-digestion and intra-abdominal inflammatory diseases caused by pancreatic juice leakage after PJ anastomosis in a porcine model were investigated. The AZ-BTS was successfully fabricated using a multiple dip-coating process. Then, the drug amount and release profile were analyzed. The therapeutic effects of AZ were examined in vitro using two kinds of pancreatic cancer cell lines, AsPC-1 and PANC-1. The efficacy of AZ-BTS was assessed in a porcine PJ leakage model, with animals were each assigned to a leakage group, a BTS group and an AZ-BTS group. The overall mortality rates in these three groups were 44.4%, 16.6%, and 0%, respectively. Mean α-amylase concentrations were significantly higher in the leakage and BTS groups than in the AZ-BTS group on day 2-5 (p < 0.05 each all). The luminal diameters and areas of the pancreatic duct were significantly larger in the leakage group than in the BTS and AZ-BTS groups (p < 0.05 each all). These findings indicate that AZ-BTS can significantly suppress intra-abdominal inflammatory diseases caused by pancreatic juice leakage and also prevent late stricture formation at the PJ anastomotic site in a porcine model.

Cardiovascular Stents: A Review of Past, Current, and Emerging Devices

One of the leading causes of morbidity and mortality worldwide is coronary artery disease, a condition characterized by the narrowing of the artery due to plaque deposits. The standard of care for treating this disease is the introduction of a stent at the lesion site. This life-saving tubular device ensures vessel support, keeping the blood-flow path open so that the cardiac muscle receives its vital nutrients and oxygen supply. Several generations of stents have been iteratively developed towards improving patient outcomes and diminishing adverse side effects following the implanting procedure. Moving from bare-metal stents to drug-eluting stents, and recently reaching bioresorbable stents, this research field is under continuous development. To keep up with how stent technology has advanced in the past few decades, this paper reviews the evolution of these devices, focusing on how they can be further optimized towards creating an ideal vascular scaffold.

A Multilayer Functionalized Drug-Eluting Balloon for Treatment of Coronary Artery Disease

Drug-eluting balloons (DEBs) have been mostly exploited as an interventional remedy for treating atherosclerosis instead of cardiovascular stents. However, the therapeutic efficacy of DEB is limited due to their low drug delivery capability to the disease site. The aim of our study was to load drugs onto a balloon catheter with preventing drug loss during transition time and maximizing drug transfer from the surface of DEBs to the cardiovascular wall. For this, a multilayer-coated balloon catheter, composed of PVP/Drug-loaded liposome/PVP, was suggested. The hydrophilic property of 1st layer, PVP, helps to separate drug layer in hydrophilic blood vessel, and the 2nd layer with Everolimus (EVL)-loaded liposome facilitates drug encapsulation and sustained release to the targeted lesions during inflation time. Additionally, a 3rd layer with PVP can protect the inner layer during transition time for preventing drug loss. The deionized water containing 20% ethanol was utilized to hydrate EVL-loaded liposome for efficient coating processes. The coating materials showed negligible toxicity in the cells and did not induce pro-inflammatory cytokine in human coronary artery smooth muscle cells (HCASMCs), even in case of inflammation induction through LPS. The results of hemocompatibility for coating materials exhibited that protein adsorption and platelet adhesion somewhat decreased with multilayer-coated materials as compared to bare Nylon tubes. The ex vivo experiments to confirm the feasibility of further applications of multilayer-coated strategy as a DEB system demonstrated efficient drug transfer of approximately 65% in the presence of the 1st layer, to the tissue in 60 s after treatment. Taken together, a functional DEB platform with such a multilayer coating approach would be widely utilized for percutaneous coronary intervention (PCI).

Designing Better Cardiovascular Stent Materials - A Learning Curve

Cardiovascular stents are life-saving devices and one of the top 10 medical breakthroughs of the 21st century. Decades of research and clinical trials have taught us about the effects of material (metal or polymer), design (geometry, strut thickness, and the number of connectors), and drug-elution on vasculature mechanics, hemocompatibility, biocompatibility, and patient health. Recently developed novel bioresorbable stents are intended to overcome common issues of chronic inflammation, in-stent restenosis, and stent thrombosis associated with permanent stents, but there is still much to learn. Increased knowledge and advanced methods in material processing have led to new stent formulations aimed at improving the performance of their predecessors but often comes with potential tradeoffs. This review aims to discuss the advantages and disadvantages of stent material interactions with the host within five areas of contrasting characteristics, such as 1) metal or polymer, 2) bioresorbable or permanent, 3) drug elution or no drug elution, 4) bare or surface-modified, and 5) self-expanding or balloon-expanding perspectives, as they relate to pre-clinical and clinical outcomes and concludes with directions for future studies.

Cytocompatibility Evaluation of a Novel Series of PEG-Functionalized Lactide-Caprolactone Copolymer Biomaterials for Cardiovascular Applications

Although the use of bioresorbable materials in stent production is thought to improve long-term safety compared to their durable counterparts, a recent FDA report on the 2-year follow-up of the first FDA-approved bioresorbable vascular stent showed an increased occurrence of major adverse cardiac events and thrombosis in comparison to the metallic control. In order to overcome the issues of first generation bioresorbable polymers, a series of polyethylene glycol-functionalized poly-L-lactide-co-ε-caprolactone copolymers with varying lactide-to-caprolactone content is developed using a novel one-step PEG-functionalization and copolymerization strategy. This approach represents a new facile way toward surface enhancement for cellular interaction, which is shown by screening these materials regarding their cyto- and hemocompatibility in terms of cytotoxicity, hemolysis, platelet adhesion, leucocyte activation and endothelial cell adhesion. By varying the lactide-to-caprolactone polymer composition, it is possible to gradually affect endothelial and platelet adhesion which allows fine-tuning of the biological response based on polymer chemistry. All polymers developed were non-cytotoxic, had acceptable leucocyte activation levels and presented non-hemolytic (<2% hemolysis rate) behavior except for PLCL-PEG 55:45 which presented hemolysis rate of 2.5% ± 0.5. Water contact angles were reduced in the polymers containing PEG functionalization (PLLA-PEG: 69.8° ± 2.3, PCL-PEG: 61.2° ± 7.5) versus those without (PLLA: 79.5° ± 3.2, PCL: 76.4° ± 10.2) while the materials PCL-PEG550, PLCL-PEG550 90:10 and PLCL-PEG550 70:30 demonstrated best endothelial cell adhesion. PLLA-PEG550 and PLCL-PEG550 70:30 presented as best candidates for cardiovascular implant use from a cytocompatibility perspective across the spectrum of testing completed. Altogether, these polymers are excellent innovative materials suited for an application in stent manufacture due to the ease in translation of this one-step synthesis strategy to device production and their excellent in vitro cyto- and hemocompatibility.

Overview of the latest developments in the field of drug-eluting stent technology

Angioplasty with stent implantation is considered to be the basic treatment method of stenosis of blood vessels. The process of stent implantation changed through the years, from stents made only from metals, produced from polymers, to biodegradable ones and those which elute drugs. The purpose of this review is to outline the development of this medical procedure and present the advantages and disadvantages of each type of stent.

Recent Advances in Manufacturing Innovative Stents

Cardiovascular diseases are the most distributed cause of death worldwide. Stenting of arteries as a percutaneous transluminal angioplasty procedure became a promising minimally invasive therapy based on re-opening narrowed arteries by stent insertion. In order to improve and optimize this method, many research groups are focusing on designing new or improving existent stents. Since the beginning of the stent development in 1986, starting with bare-metal stents (BMS), these devices have been continuously enhanced by applying new materials, developing stent coatings based on inorganic and organic compounds including drugs, nanoparticles or biological components such as genes and cells, as well as adapting stent designs with different fabrication technologies. Drug eluting stents (DES) have been developed to overcome the main shortcomings of BMS or coated stents. Coatings are mainly applied to control biocompatibility, degradation rate, protein adsorption, and allow adequate endothelialization in order to ensure better clinical outcome of BMS, reducing restenosis and thrombosis. As coating materials (i) organic polymers: polyurethanes, poly(ε-caprolactone), styrene-b-isobutylene-b-styrene, polyhydroxybutyrates, poly(lactide-co-glycolide), and phosphoryl choline; (ii) biological components: vascular endothelial growth factor (VEGF) and anti-CD34 antibody and (iii) inorganic coatings: noble metals, wide class of oxides, nitrides, silicide and carbide, hydroxyapatite, diamond-like carbon, and others are used. DES were developed to reduce the tissue hyperplasia and in-stent restenosis utilizing antiproliferative substances like paclitaxel, limus (siro-, zotaro-, evero-, bio-, amphi-, tacro-limus), ABT-578, tyrphostin AGL-2043, genes, etc. The innovative solutions aim at overcoming the main limitations of the stent technology, such as in-stent restenosis and stent thrombosis, while maintaining the prime requirements on biocompatibility, biodegradability, and mechanical behavior. This paper provides an overview of the existing stent types, their functionality, materials, and manufacturing conditions demonstrating the still huge potential for the development of promising stent solutions.

A Review of the Ultrathin Orsiro Biodegradable Polymer Drug-eluting Stent in the Treatment of Coronary Artery Disease

Drug-eluting stents (DES) have revolutionised the treatment of coronary artery disease (CAD) in patients undergoing percutaneous coronary intervention. In recent years, there has been a focus on a new generation of DES, such as biodegradable polymer DES (BP-DES). This novel stent platform was developed with the hope of eliminating the risk of very late stent thrombosis associated with the current gold-standard durable polymer DES (DP-DES). Ultrathin Orsiro BP-DES (Biotronik, Bülach, Switzerland) are based on a cobalt-chromium stent platform that is coated with a bioresorbable polymer coating containing sirolimus. These devices have one of the thinnest struts available in the current market and have the theoretical benefit of reducing a chronic inflammatory response in the vessel wall. In 2019, the United States Food and Drug Administration (FDA) approved the use of Orsiro BP-DES in patients with CAD based on promising results in recent landmark trials, such as BIOFLOW V and BIOSTEMI. The aim of the present review article was to discuss the history of stent technology and the continued opportunities for improvements, focusing on the potential benefits of Orsiro BP-DES.

Lactic acid-mediated endothelial to mesenchymal transition through TGF-β1 contributes to in-stent stenosis in poly-L-lactic acid stent

Currently, bioresorbable stents made with biodegradable materials are attracting more and more attentions in cardiovascular tissue engineering. Especially, poly-L-lactic acid (PLLA) stent has been regarded as the most promising one due to excellent biodegradability until serious in-stent restenosis at late stage was reported. This imply that the PLLA stent has side effect in cell function, and it is rarely reported the effect of degradation product of PLLA on endothelial function. Here we reported that lactic acid (LA) not acidic pH induced endothelial-to-mesenchymal transition (EndMT) leading to vascular fibrosis which may contribute to in-stent stenosis after PLLA stent implantation. Furthermore, we found TGF-β1 signaling was involved in boosting EndMT by LA. These results demonstrate a mechanism of in-stent stenosis induced by PLLA and indicate its utility for the future design of polymeric vascular scaffolds.

Ni-free, built-in nanotubular drug eluting stents: Experimental and theoretical insights

Stents used for cardiovascular applications are composed of three main elements; a metal, polymer coating and the specific drug component. Nickel-based metals and polymer coatings currently used in the stent market have increased the recurrence of in-stent restenosis and stent failure due to inflammation. In this study, a Ti-8Mn alloy was used to fabricate a nanostructured surface that can be used for drug eluting stents to overcome the hypersensitivity of metals that are currently used in stent making as well as introducing a new built-in nano-drug reservoir instead of polymer coatings. Two different systems were studied: titanium dioxide nanotubes (NTs) and Ti-8Mn oxides NTs. The materials were characterized using field emission electron microscope (FESEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), roughness, wettability and surface energy measurements. Nanoindentation was used to evaluate the mechanical properties of the nanotubes as well as their stability. In-vitro cytotoxicity and cell proliferation assays were used to study the effect of the nanotubes on cell viability. Computational insights were also used to test the blood compatibility using band gap model analysis, comparing the band gap of the materials under investigation with that of the fibrinogen, in order to study the possibility of charge transfer that affects the blood clotting mechanism. In addition, the drug loading capacity of the materials was studied using acetyl salicylic acid as a drug model.

Inhibition of in-stent restenosis after graphene oxide double-layer drug coating with good biocompatibility

In this study, we designed a double layer-coated vascular stent of 316L stainless steel using an ultrasonic spray system to achieve both antiproliferation and antithrombosis. The coating included an inner layer of graphene oxide (GO) loaded with docetaxel (DTX) and an outer layer of carboxymethyl chitosan (CMC) loaded with heparin (Hep). The coated surface was uniform without aggregation and shedding phenomena before and after stent expanded. The coating treatment was able to inhibit the adhesion and activation of platelets and the proliferation and migration of smooth muscle cells, indicating the excellent biocompatibility and antiproliferation ability. The toxicity tests showed that the GO/DTX and CMC/Hep coating did not cause deformity and organ abnormalities in zebrafish under stereomicroscope. The stents with GO double-layer coating were safe and could effectively prevent thrombosis and in-stent restenosis after the implantation into rabbit carotid arteries for 4–12 weeks.

In vitro and in vivo evaluation of a dextran-graft-polybutylmethacrylate copolymer coated on CoCr metallic stent

Introduction: The major complications of stent implantation are restenosis and late stent thrombosis. PBMA polymers are used for stent coating because of their mechanical properties. We previously synthesized and characterized Dextrangraft-polybutylmethacrylate copolymer (Dex-PBMA) as a potential stent coating. In this study, we evaluated the haemocompatibility and biocompatibility properties of Dex-PBMA in vitro and in vivo. Methods: Here, we investigated: (1) the effectiveness of polymer coating under physiological conditions and its ability to release Tacrolimus®, (2) the capacity of Dex-PBMA to inhibit Staphylococcus aureus adhesion, (3) the thrombin generation and the human platelet adhesion in static and dynamic conditions, (4) the biocompatibility properties in vitro on human endothelial colony forming cells ( ECFC) and on mesenchymal stem cells (MSC) and in vivo in rat models, and (5) we implanted Dex-PBMA and Dex-PBMA_TAC coated stents in neointimal hyperplasia restenosis rabbit model. Results: Dex-PBMA coating efficiently prevented bacterial adhesion and release Tacrolimus®. Dex-PBMA exhibit haemocompatibility properties under flow and ECFC and MSC compatibility. In vivo, no pathological foreign body reaction was observed neither after intramuscular nor intravascular aortic implantation. After Dex-PBMA and Dex-PBMA_TAC coated stents 30 days implantation in a restenosis rabbit model, an endothelial cell coverage was observed and the lumen patency was preserved. Conclusion: Based on our findings, Dex-PBMA exhibited vascular compatibility and can potentially be used as a coating for metallic coronary stents.

Surface-Degradable Drug-Eluting Stent with Anticoagulation, Antiproliferation, and Endothelialization Functions

Drug-eluting stents (DES) have been widely applied for saving the life of patients with coronary artery diseases (CADs). However, conventional polymers such as polylactic acid (PLA) and poly (lactic-co-glycolic acid) (PLGA), which are widely applied for drug-eluting stents studies, have serious bulk erosion problems, like high local acidity and poor mechanical properties. Instead, we chose surface erosion polymer poly (1, 3-trimethylene carbonate) (PTMC) as a drug carrier in this study. Here, we fabricated and characterized a novel durable-polymer drug-eluting 316 L stainless steel (SS) stent, in which the inner surface was coated with a Ti–O film using the magnetron sputtering method to promote the growth of endothelial cells (ECs). On the outer layer of the stent, first, a Ti–O film was deposited and, then, on top of it a rapamycin-loaded PTMC coat was deposited using the ultrasonic atomization spray method. This dual coating inhibited the migration and expansion of smooth muscle cells (SMCs). The drug coating also inhibited the adhesion/activation of platelets. In tests on dogs, it was found the novel stent promoted re-endothelialization and reduced restenosis, in contrast to the plain SS stent. Thus, the novel stent may have promise for use in treating patients with CAD.

Non-polymer drug-eluting coronary stents

Cardiovascular complications are leading causes of most fatalities. Coronary artery disease and surgical failures contribute to the death of the majority of patients. Advanced research in the field of medical devices like stents has efficiently resolved these problems. Clinically, drug-eluting stents have proven their efficacy and safety compared to bare metal stents, which have problems of in-stent restenosis. However, drug-loaded stents coated with polymers have shown adverse effects related to the stability and deterioration of the polymer coating over time. This results in late stent thrombosis and immunogenicity. These reasons laid the foundation for the development of non-polymeric drug-eluting stents. This review focuses on non-polymer drug-eluting stents loaded with different drugs like anti-inflammatory agents, anti-thrombotic, anti-platelet agents, immune suppressants and others. Surface modification techniques on stents like crystalline coating; microporous, macroporous, and nanoporous coatings; and chemically modified self-assembled monolayers are described in detail. There is also an update on clinically approved products and those under development.

An asymmetrical dual coating on the stent prepared by ultrasonic atomization

This study aims to design an asymmetric dual coating (ADC) on the stent by ultrasonic atomization to solve the problem of delayed endothelialization and late or very late stent thrombosis which caused by drug eluting stent (DES) with symmetric coating. Chitosan-loaded monoclonal platelet glycoprotein IIIa receptor antibody SZ-21 coating (CSC) was sprayed on inner surface of stents, and outer surface was sprayed CSC and poly(lactic-co-glycolic acid) (PLGA) loaded with docetaxel (DTX) coating (PDC). The coated surface was uniform without aggregation and no shedding phenomenon either before or after stent expanded. Fluorescence labeling has confirmed that the coating has an asymmetric structure. The cumulative release for SZ-21 and DTX was 40.11% and 27.22% within first 24 h, then DTX became the major released drug from 24 h to 7 d, after released for 28 d about 40% of the SZ-21 and 50% DTX still remained on the coated stent. It achieved that ADC can inhibit thrombosis at earlier period and inhibit vascular smooth muscle cells (VSMCs) proliferation at later period. And that ADC has good hemocompatibility and can significantly inhibit VSMCs proliferation. Finally, 4 and 12 weeks after the stent with ADC implanted into rabbit carotid arteries, it showed that the stent with ADC was safe and could effectively prevent thrombosis and in-stent restenosis. © 2018 Wiley Periodicals, Inc. J. Biomed. Mater. Res. Part B, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 825-837, 2019.

Multifunctional coatings that mimic the endothelium: surface bound active heparin nanoparticles with in situ generation of nitric oxide from nitrosothiols

Multifunctional coatings that mimic the endothelial function in terms of nitric oxide generation and membrane-bound active heparin species are prepared via the immobilization of cystamine-modified heparin/polyethyleneimine (Hep-Cys/PEI) nanoparticles. Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS) were conducted to confirm the coating formation. Functions of active heparin release and nitric oxide (NO) generation are obtained on the material surface after the immobilization of Hep-Cys/PEI nanoparticles. Moreover, a nanoparticle-immobilized coating is sufficiently flexible to resist the deformation of a 316L SS stent without any destruction. With the introduction of heparin, the antithrombin III (AT-III) binding ability was significantly enhanced with prolonged APTT time. Besides, a Hep-Cys/PEI nanoparticle immobilized coating surface not only significantly suppressed the platelet adhesion and activation, but also promoted EC proliferation and inhibited SMC proliferation. Besides, a milder tissue response was observed on the NP immobilized surface. With the synergistic effect of heparin and nitric oxide generating moieties, such multifunctional coatings presented potential for the modification of vascular materials.

Arsenic Trioxide-Coated Stent Is an Endothelium-Friendly Drug Eluting Stent

An ideal vascular stent would both inhibit in-stent restenosis (ISR) and promote rapid re-endothelialization. In the current study, the performance of arsenic trioxide (ATO)-drug eluting stent (AES) is compared with the bare metal stent, poly-lactic-co-glycolic acid-coating metal stent, and rapamycin-drug eluting stent (RES). In vivo AES is shown to prevent neointimal hyperplasia more efficiently than the others when implanted into the carotid arteries of rabbits. Moreover, AES promotes endothelial cells proliferation and re-endothelialization more quickly than RES. In vitro ATO exposure significantly increases the viability, proliferation, adhesion, and spreading of primary porcine coronary artery endothelial cells (PCAECs), which are critical for endothelialization. However, ATO exposure reduces the viability of porcine coronary artery smooth muscle cells (PCASMCs). The evaluation of mitochondrial morphology, membrane potential, and function demonstrates that ATO at 2 µmol L^-1 causes enlargement of the mitochondrion, enhancement of mitochondrial membrane potential, and adenosine triphosphate (ATP) production in PCAECs but not in PCASMCs. Thus, both in vivo and in vitro studies demonstrate that AES is an effective strategy for rapid re-endothelialization and inhibition of ISR.

Rapamycin Treatment Attenuates Angiotensin II -induced Abdominal Aortic Aneurysm Formation via VSMC Phenotypic Modulation and Down-regulation of ERK1/2 Activity

The aim of the present study is to address the effect of rapamycin on abdominal aortic aneurysm (AAA) and the potential mechanisms. A clinically relevant AAA model was induced in apolipoprotein E-deficient (ApoE-/-) mice, in which miniosmotic pump was implanted subcutaneously to deliver angiotensin II (Ang II) for 14 days. Male ApoE-/- mice were randomly divided into 3 groups: saline infusion, Ang II infusion, and Ang II infusion plus intraperitoneal injection of rapamycin. The diameter of the supra-renal abdominal aorta was measured by ultrasonography at the end of the infusion. Then aortic tissue was excised and examined by Western blotting and histoimmunochemistry. Ang n with or without rapamycin treatment was applied to the cultured vascular smooth muscle cells (VSMCs) in vitro. The results revealed that rapamycin treatment significantly attenuated the incidence of Ang II induced-AAA in ApoE-/- mice. Histologic analysis showed that rapamycin treatment decreased disarray of elastin fibers and VSMCs hyperplasia in the medial layer. Immunochemistry staining and Western blotting documented the increased phospho-ERK1/2 and ERK1/2 expression in aortic walls in Ang II induced-AAA, as well as in human lesions. Whereas in the rapamycintreated group, decreased phospho-ERKl/2 expression level was detected. Moreover, rapamycin reversed Ang II -induced VSMCs phenotypic change both in vivo and in vitro. Based on those results, we confirmed that rapamycin therapy suppressed Ang II -induced AAA formation in mice, partially via VSMCs phenotypic modulation and down-regulation of ERK1/2 activity.

Protective Layer Development for Enhancing Stability and Drug-Delivery Capabilities of DES Surface-Crystallized Coatings

Carrier-free drug-eluting stents (DES)-based crystalline coatings are gaining prominence because of their function, skipping many limitations and clinical complications of the currently marketed DES. However, their usage has been humbled by inflexibility of the crystalline coating and limited mechanical and physical properties. This study reports for the first time the development of a protective top coating for enhancing the merits and delivery capabilities of the crystalline coating. Flexible and water-soluble polysaccharide top coating was developed and applied onto rapamycin (RM) crystalline carpet. The top coating prevented crystalline coating delamination during stent crimping and expansion without affecting its release profile. Crystalline coating strata and its interfaces with the metallic substrate and top coating were fully studied and characterized. The crystalline top-coated stents showed significant physical, mechanical, and chemical stability enhancement with ∼2% RM degradation after 1 year under different storage conditions. Biocompatibility study of the top-coated stents implanted subcutaneously for 1 month into SD rats did not provoke any safety concerns. Incorporating RM into the top coating to develop a bioactive protective coating for multilayer release purposes was also investigated. The developed protective coating had wide applicability and may be further implemented for various drugs and implantable medical devices.

Drug-eluting balloon: design, technology and clinical aspects

A drug-eluting balloon is a non-stent technology in which the effective homogenous delivery of anti-proliferative drugs is processed by the vessel wall through an inflated balloon. This is done to restore luminal vascularity in order to treat atherosclerosis, in-stent restenosis and reduce the risk of late thrombosis without implanting a permanent foreign object. The balloon technology relies on the concept of targeted drug delivery, which helps in the rapid healing of the vessel wall and prevents the proliferation of smooth muscle cells. Several drug eluting devices in the form of coated balloons are currently in clinical use, namely DIOR^®, PACCOCATH^®, SeQuent^®Please and IN.PACT™. The device varies in terms of the material used for making the balloon, the coating techniques, the choice of coated drug and the release pattern of the drug at the site. This review gives an insight into the evolution, rationale and comparison of the marketed drug-eluting balloons. Here, different coating techniques have been analysed for the application and critical analysis of available DEB technologies, and a technical comparison has been done.