On-demand drug delivery from local depots

Poly(N-isopropylacrylamide) based smart nanofibrous scaffolds for use as on-demand delivery systems for oral and dental tissue regeneration

Stimuli-responsive domains capable of releasing loaded molecules, "on-demand," have garnered increasing attention due to their enhanced delivery, precision targeting, and decreased adverse effects. The development of an on-demand delivery system that can be easily triggered by dental clinicians might have major roles in dental and oral tissue engineering. A series of random graft poly(NIPAm-co-HEMA-Lactate) copolymers were synthesized using 95:5, 85:5, 60:40, and 40:60 ratios of thermosensitive NIPAm and HEMA-poly lactate respectively then electrospun to produce nanofibrous scaffolds loaded with bovine serum albumin (BSA). Cumulative BSA release was assessed at 25C and 37°C. To appraise the use of scaffolds as on-demand delivery systems, they were subjected to thermal changes in the form cooling and warming cycles during which BSA release was monitored. To confirm the triggered releasing ability of the synthesized scaffolds, the copolymer made with 60% NIPAm was selected, based on the results of the release tests, and loaded with bone morphogenetic protein-2 (BMP-2). The loaded scaffolds were placed with mesenchymal-like stem cells (iMSCs) derived from induced pluripotent stem cells (iPSCs), and subjected to temperature alterations. Then, the osteogenic differentiation of iMSCs, which might have resulted from the released protein, was evaluated after 10 days by analyzing runt-related transcription factor 2 (RUNX-2) osteogenic gene expression by the cells using real-time quantitative polymerase chain reaction (qRT-PCR). BSA release profiles showed a burst release at the beginning followed by a more linear pattern at 25°C, and a much slower release at 37°C. The release also decreased when the PNIPAm content decreased in the scaffolds. Thermal triggering led to a step-like release pattern in which the highest release was reported 30 min through the warming cycles. The iMSCs cultivated with scaffolds loaded with BMP-2 and exposed to temperature alteration showed significantly higher RUNX-2 gene expression than cells in the other experimental groups. The synthesized scaffolds are thermo-responsive and could be triggered to deliver biological biomolecules to be used in oral and dental tissue engineering. Thermal stimuli could be simulated by dental clinicians using simple means of cold therapy, for example, cold packs in intraoral accessible sites for specified times.

Preparation Strategies, Functional Regulation, and Applications of Multifunctional Nanomaterials-Based DNA Hydrogels

With the extensive attention of DNA hydrogels in biomedicine, biomaterial, and other research fields, more and more functional DNA hydrogels have emerged to match the various needs. Incorporating nanomaterials into the hydrogel network is an emerging strategy for functional DNA hydrogel construction. Surprisingly, nanomaterials-based DNA hydrogels can be engineered to possess favorable properties, such as dynamic mechanical properties, excellent optical properties, particular electrical properties, perfect encapsulation properties, improved magnetic properties, and enhanced antibacterial properties. Herein, the preparation strategies of nanomaterials-based DNA hydrogels are first highlighted and then different nanomaterial designs are used to demonstrate the functional regulation of DNA hydrogels to achieve specific properties. Subsequently, representative applications in biosensing, drug delivery, cell culture, and environmental protection are introduced with some selected examples. Finally, the current challenges and prospects are elaborated. The study envisions that this review will provide an insightful perspective for the further development of functional DNA hydrogels.

NIR light-facilitated bone tissue engineering

In the last decades, near-infrared (NIR) light has attracted considerable attention due to its unique properties and numerous potential applications in bioimaging and disease treatment. Bone tissue engineering for bone regeneration with the help of biomaterials is currently an effective means of treating bone defects. As a controlled light source with deeper tissue penetration, NIR light can provide real-time feedback of key information on bone regeneration in vivo utilizing fluorescence imaging and be used for bone disease treatment. This review provides a comprehensive overview of NIR light-facilitated bone tissue engineering, from the introduction of NIR probes as well as NIR light-responsive materials, and the visualization of bone regeneration to the treatment of bone-related diseases. Furthermore, the existing challenges and future development directions of NIR light-based bone tissue engineering are also discussed. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement.

Electrospun Polymeric Fibers Decorated with Silk Microcapsules via Encapsulation and Surface Immobilization for Drug Delivery

Hollow polymer microcapsules as drug carriers have the advantages of drug protection, storage, and controlled release. Microcapsules combined with tissue engineering scaffolds such as electrospun microfibers can enhance long-term local drug retention. However, the combination methods of microcapsules and fibers still need to be further explored. Here, different technical approaches to functionalize electrospun polycaprolactone (PCL) microfibers with silk fibroin (SF) microcapsules through encapsulation and surface immobilization are developed, including direct blending and emulsion electrospinning for encapsulation, as well as covalent and cleavable disulfide-linkage for surface immobilization. The results of "blending" approach show that silk microcapsules with different sizes could be uniformly encapsulated inside electrospun fibers without aggregation. To further reduce the use of organic solvents, the microcapsules in the aqueous phase can be uniformly distributed in the PCL organic phase and successfully electrospun into fibers using surfactant span-80. For surface immobilization, silk microcapsules are efficiently covalent binding to the surface of electrospun PCL fibers via click chemistry and exhibited noncytotoxic. Based on this method, with the incorporation of a disulfide bond, the linkages between microcapsule and fiber could be cleaved under reducing conditions. These microcapsule-electrospun fiber combination methods provide sufficient options for different drug delivery requirements.

Controlled release of adeno-associated virus from alginate hydrogel microbeads with enhanced sensitivity to ultrasound

Adeno-associated virus (AAV)-based gene therapy holds promise as a fundamental treatment for genetic disorders. For clinical applications, it is necessary to control AAV release timing to avoid an immune response to AAV. Here we propose an ultrasound (US)-triggered on-demand AAV release system using alginate hydrogel microbeads (AHMs) with a release enhancer. By using a centrifuge-based microdroplet shooting device, the AHMs encapsulating AAV with tungsten microparticles (W-MPs) are fabricated. Since W-MPs work as release enhancers, the AHMs have high sensitivity to the US with localized variation in acoustic impedance for improving the release of AAV. Furthermore, AHMs were coated with poly-l-lysine (PLL) to adjust the release of AAV. By applying US to the AAV encapsulating AHMs with W-MPs, the AAV was released on demand, and gene transfection to cells by AAV was confirmed without loss of AAV activity. This proposed US-triggered AAV release system expands methodological possibilities in gene therapy.

Dynamic and Wearable Electro-responsive Hydrogel with Robust Mechanical Properties for Drug Release

Electro-responsive dynamic hydrogels, which possess robust mechanical properties and precise spatiotemporal resolution, have a wide range of applications in biomedicine and energy science. However, it is still challenging to design and prepare electro-responsive hydrogels (ERHs) which have all of these properties. Here, we report one such class of ERHs with these features, based on the direct current voltage (DCV)-induced rearrangement of sodium dodecyl sulfate (SDS) micelles, where the rearrangement can tune the hydrogel networks that are originally maintained by the SDS micelle-assisted hydrophobic interactions. An enlarged mesh size is demonstrated for these ERHs after DCV treatment. Given the unique structure and properties of these ERHs, hydrophobic cargo (thiostrepton) has been incorporated into the hydrogels and is released upon DCV loading. Additionally, these hydrogels are highly stretchable (>6000%) and tough (507 J/m²), showing robust mechanical properties. Moreover, these hydrogels have a high spatiotemporal resolution. As the cross-links within our ERHs are enabled by the non-covalent (i.e., hydrophobic) interactions, these hydrogels are self-healing and malleable. Considering the robust mechanical properties, precise spatiotemporal resolution, dynamic nature (e.g., injectable and self-healing), and on-demand drug delivery ability, this class of ERHs will be of great interest in the fields of wearable bioelectronics and smart drug delivery systems.

Feedback-controlled solute transport through chemo-responsive polymer membranes

Polymer membranes are typically assumed to be inert and nonresponsive to the flux and density of the permeating particles in transport processes. Here, we theoretically study the consequences of membrane responsiveness and feedback on the steady-state force-flux relations and membrane permeability using a nonlinear-feedback solution-diffusion model of transport through a slab-like membrane. Therein, the solute concentration inside the membrane depends on the bulk concentration, c₀, the driving force, f, and the polymer volume fraction, ϕ. In our model, the solute accumulation in the membrane causes a sigmoidal volume phase transition of the polymer, changing its permeability, which, in return, affects the membrane's solute uptake. This feedback leads to nonlinear force-flux relations, j(f), which we quantify in terms of the system's differential permeability, P_sys ^Δ∝dj/df. We find that the membrane feedback can increase or decrease the solute flux by orders of magnitude, triggered by a small change in the driving force and largely tunable by attractive vs repulsive solute-membrane interactions. Moreover, controlling the inputs, c₀ and f, can lead to the steady-state bistability of ϕ and hysteresis in the force-flux relations. This work advocates that the fine-tuning of the membrane's chemo-responsiveness will enhance the nonlinear transport control features, providing great potential for future (self-)regulating membrane devices.

Advanced triboelectric nanogenerator-driven drug delivery systems for targeted therapies

In the current decade, remarkable efforts have been made to develop a self-regulated, on-demand and controlled release drug delivery system driven by triboelectric nanogenerators (TENGs). TENGs have great potential to convert biomechanical energy into electricity and are suitable candidates for self-powered drug delivery systems (DDSs) with exciting features such as small size, easy fabrication, biocompatible, high power output and economical. This review exclusively explains the development and implementation process of TENG-mediated, self-regulated, on-demand and targeted DDSs. It also highlights the recently used TENG-driven DDSs for cancer therapy, infected wounds healing, tissue regeneration and many other chronic disorders. Moreover, it summarises the crucial challenges that are needed to be addressed for their universal applications. Finally, a roadmap to advance the TENG-based drug delivery system developments is depicted for the targeted therapies and personalised healthcare.

Smart-Temporary-Film-Based Local-Delivery System with Controllable Drug-Release Behavior

The development of a simple local drug-delivery system that exhibits the advantages of macro- and microscale carriers with controllable drug-release behavior is still highly desired. Herein, in this work, a smart temporary film was prepared from doxorubicin (DOX)-loaded shape-memory microgels via a simple hot-compression programming method. The temporary film showed a very smooth surface and easy handing, as well as macroscopy mechanical properties, which could disintegrate into the microgels with heating at 45 °C. In this case, the temporary film showed a controllable DOX release behavior when compared with the microgels, which could release the DOX on demand. Consequently, the temporary film exhibited weaker cytotoxicity to normal cells and a much longer antitumor capability, as well as a higher drug-utilization efficiency when compared with microgels. Therefore, the smart temporary film has high potential as a candidate for use as a local drug-delivery system.

Ultrasound Responsive Smart Implantable Hydrogels for Targeted Delivery of Drugs: Reviewing Current Practices

Over the last two decades, the process of delivering therapeutic drugs to a patient with a controlled release profile has been a significant focus of drug delivery research. Scientists have given tremendous attention to ultrasound-responsive hydrogels for several decades. These smart nanosystems are more applicable than other stimuli-responsive drug delivery vehicles (ie UV-, pH- and thermal-, responsive materials) because they enable more efficient targeted treatment via relatively non-invasive means. Ultrasound (US) is capable of safely transporting energy through opaque and complex media with minimal loss of energy. It is capable of being localized to smaller regions and coupled to systems operating at various time scales. However, the properties enabling the US to propagate effectively in materials also make it very difficult to transform acoustic energy into other forms that may be used. Recent research from a variety of domains has attempted to deal with this issue, proving that ultrasonic effects can be used to control chemical and physical systems with remarkable specificity. By obviating the need for multiple intravenous injections, implantable US responsive hydrogel systems can enhance the quality of life for patients who undergo treatment with a varied dosage regimen. Ideally, the ease of self-dosing in these systems would lead to increased patient compliance with a particular therapy as well. However, excessive literature has been reported based on implanted US responsive hydrogel in various fields, but there is no comprehensive review article showing the strategies to control drug delivery profile. So, this review was aimed at discussing the current strategies for controlling and targeting drug delivery profiles using implantable hydrogel systems.

Biomaterial-targeted precision nanoparticle delivery to the injured spinal cord

Drug delivery requires precision in timing, location, and dosage to achieve therapeutic benefits. Challenges in addressing all three of these critical criteria result in poor temporal dexterity, widespread accumulation and off-target effects, and high doses with the potential for toxicity. To address these challenges, we have developed the BiomatErial Accumulating Carriers for On-demand Nanotherapy (BEACON) platform that utilizes an implantable biomaterial to serve as a target for systemically delivered nanoparticles (NPs). With the BEACON system, administered NPs are conjugated with a ligand that has high affinity for a receptor in the implanted biomaterial. To test BEACON, an in vivo spinal cord injury (SCI) model was used as it provides an injury model where the three identified criteria can be tested as it is a dynamic and complicated injury model with no currently approved therapies. Through our work, we have demonstrated temporal dexterity in NP administration by injecting 6 days post-SCI, decreased off-target accumulation with a significant drop in liver accumulation, and retention of our NPs in the target biomaterial. The BEACON system can be applied broadly, beyond the nervous system, to improve systemically delivered NP accumulation at an implanted biomaterial target. STATEMENT OF SIGNIFICANCE: Targeted drug delivery approaches have the potential to improve therapeutic regimens for patients on a case-by-case basis. Improved localization of a therapeutic to site of interest can result in increased efficacy and limit the need for repeat dosing. Unfortunately, targeted strategies can fall short when receptors on cells or tissues are too widespread or change over the course of disease or injury progression. The BEACON system developed herein eliminates the need to target a cell or tissue receptor by targeting an implantable biomaterial with location-controllable accumulation and sustained presentation over time. The targeting paradigm presented by BEACON is widely applicable throughout tissue engineering and regenerative medicine without the need to retool for each new application.

A Review of Multifunction Smart Nanoparticle based Drug Delivery Systems

Cancer nano-therapeutics are rapidly evolving and are often used to overcome a number of concerns with traditional drug delivery methods, including non-specific drug targeting and distribution, low oral bioavailability, and poor hydrophilicity. Modern nano-based targeting techniques have been developed as a result of advances in nano vehicle engineering and materials science, which may bring people with cancer a new hope. Clinical trials have been authorized for a number of medicinal nanocarriers. Nanocarriers with the best feasible size and surface attributes have been developed to optimize biodistribution and increase blood circulation duration. Nanotherapeutics can carry preloaded active medicine towards cancerous cells by preferentially leveraging the specific physiopathology of malignancies. In contrast to passive targeting, active targeting strategies involving antigens or ligands, developed against specific tumor sites, boost the selectivity of these curative nanovehicles. Another barrier that nanoparticles may resolve or lessen is drug resistance. Multifunctional and complex nanoparticles are currently being explored and are predicted to usher in a new era of nanoparticles that will allow for more individualized and customized cancer therapy. The potential prospects and opportunities of stimuli-triggered nanosystems in therapeutic trials are also explored in this review.

Ultrasound-Induced Drug Release from Stimuli-Responsive Hydrogels

Stimuli-responsive hydrogel drug delivery systems are designed to release a payload when prompted by an external stimulus. These platforms have become prominent in the field of drug delivery due to their ability to provide spatial and temporal control for drug release. Among the different external triggers that have been used, ultrasound possesses several advantages: it is non-invasive, has deep tissue penetration, and can safely transmit acoustic energy to a localized area. This review summarizes the current state of understanding about ultrasound-responsive hydrogels used for drug delivery. The mechanisms of inducing payload release and activation using ultrasound are examined, along with the latest innovative formulations and hydrogel design strategies. We also report on the most recent applications leveraging ultrasound activation for both cancer treatment and tissue engineering. Finally, the future perspectives offered by ultrasound-sensitive hydrogels are discussed.

Ultrasound-Responsive Hydrogels for On-Demand Protein Release

The development of tunable, ultrasound-responsive hydrogels that can deliver protein payload on-demand when exposed to focused ultrasound is described in this study. Reversible Diels-Alder linkers, which undergo a retro reaction when stimulated with ultrasound, were used to cross-link chitosan hydrogels with entrapped FITC-BSA as a model protein therapeutic payload. Two Diels-Alder linkage compositions with large differences in the reverse reaction energy barriers were compared to explore the influence of linker composition on ultrasound response. Selected physicochemical properties of the hydrogel construct, its basic degradation kinetics, and its cytocompatibility were measured with respect to Diels-Alder linkage composition. Focused ultrasound initiated the retro Diels-Alder reaction, controlling the release of the entrapped payload while also allowing for real-time visualization of the ongoing process. Additionally, increasing the focused ultrasound amplitude and time correlated with an increased rate of protein release, indicating stimuli responsive control.

Review of Recent Advances and Their Improvement in the Effectiveness of Hydrogel-Based Targeted Drug Delivery: A Hope for Treating Cancer

Using hydrogels for delivering cancer therapeutics is advantageous in pharmaceutical usage as they have an edge over traditional delivery, which is tainted due to the risk of toxicity that it imbues. Hydrogel usage leads to the development of a more controlled drug release system owing to its amenability for structural metamorphosis, its higher porosity to seat the drug molecules, and its ability to shield the drug from denaturation. The thing that makes its utility even more enhanced is that they make themselves more recognizable to the body tissues and hence can stay inside the body for a longer time, enhancing the efficiency of the delivery, which otherwise is negatively affected since the drug is identified by the human immunity as a foreign substance, and thus, an attack of the immunity begins on the drug injected. A variety of hydrogels such as thermosensitive, pH-sensitive, and magnetism-responsive hydrogels have been included and their potential usage in drug delivery has been discussed in this review that aims to present recent studies on hydrogels that respond to alterations under a variety of circumstances in "reducing" situations that mimic the microenvironment of cancerous cells.

Advanced Hydrogels for Cartilage Tissue Engineering: Recent Progress and Future Directions

Cartilage is a tension- and load-bearing tissue and has a limited capacity for intrinsic self-healing. While microfracture and arthroplasty are the conventional methods for cartilage repair, these methods are unable to completely heal the damaged tissue. The need to overcome the restrictions of these therapies for cartilage regeneration has expanded the field of cartilage tissue engineering (CTE), in which novel engineering and biological approaches are introduced to accelerate the development of new biomimetic cartilage to replace the injured tissue. Until now, a wide range of hydrogels and cell sources have been employed for CTE to either recapitulate microenvironmental cues during a new tissue growth or to compel the recovery of cartilaginous structures via manipulating biochemical and biomechanical properties of the original tissue. Towards modifying current cartilage treatments, advanced hydrogels have been designed and synthesized in recent years to improve network crosslinking and self-recovery of implanted scaffolds after damage in vivo. This review focused on the recent advances in CTE, especially self-healing hydrogels. The article firstly presents the cartilage tissue, its defects, and treatments. Subsequently, introduces CTE and summarizes the polymeric hydrogels and their advances. Furthermore, characterizations, the advantages, and disadvantages of advanced hydrogels such as multi-materials, IPNs, nanomaterials, and supramolecular are discussed. Afterward, the self-healing hydrogels in CTE, mechanisms, and the physical and chemical methods for the synthesis of such hydrogels for improving the reformation of CTE are introduced. The article then briefly describes the fabrication methods in CTE. Finally, this review presents a conclusion of prevalent challenges and future outlooks for self-healing hydrogels in CTE applications.

Advancing models of neural development with biomaterials

Human pluripotent stem cells have emerged as a promising in vitro model system for studying the brain. Two-dimensional and three-dimensional cell culture paradigms have provided valuable insights into the pathogenesis of neuropsychiatric disorders, but they remain limited in their capacity to model certain features of human neural development. Specifically, current models do not efficiently incorporate extracellular matrix-derived biochemical and biophysical cues, facilitate multicellular spatio-temporal patterning, or achieve advanced functional maturation. Engineered biomaterials have the capacity to create increasingly biomimetic neural microenvironments, yet further refinement is needed before these approaches are widely implemented. This Review therefore highlights how continued progression and increased integration of engineered biomaterials may be well poised to address intractable challenges in recapitulating human neural development.

3D Printing of dynamic tissue scaffold by combining self-healing hydrogel and self-healing ferrogel

Hydrogels have been widely utilized in tissue engineering applications as functional and biological synthetic extracellular matrices (ECMs) can be created with gels. However, typical hydrogels cannot be exploited in 3D printing, especially in extrusion printing, unless post-cross-linking after printing is provided. Additionally, dynamic tissue scaffolds that can mimic ECM environments in the body have been demonstrated to be useful in tissue engineering. Here, we hypothesized that a 3D-printed dynamic tissue scaffold could be fabricated by combining self-healing hydrogel and self-healing ferrogel without post-cross-linking, which could be useful for the regulation of cell phenotype under magnetic stimulation. Hydrogels were formed from oxidized sodium hyaluronate and glycol chitosan, and adipic acid dihydrazide was additionally utilized for self-healing behavior of the gel. Superparamagnetic iron oxide nanoparticles (SPIONs) were also used to prepare a magnetically responsive hydrogel system (i.e., ferrogel). Physicochemical properties, cytotoxicity, and printability of the self-healing hydrogel/ferrogel system fabricated by a 3D printing process, were investigated. Dimensional changes in a tissue scaffold were achieved by the application of a magnetic field. Interestingly, chondrogenic differentiation of ATDC5 cells cultured within the dynamic tissue scaffold was enhanced by applying a magnetic field in vitro. This approach may be useful for fabricating dynamic tissue scaffolds by a 3D printing method for tissue engineering applications.

A genome-engineered bioartificial implant for autoregulated anticytokine drug delivery

Biologic drug therapies are increasingly used for inflammatory diseases such as rheumatoid arthritis but may cause significant adverse effects when delivered continuously at high doses. We used CRISPR-Cas9 genome editing of iPSCs to create a synthetic gene circuit that senses changing levels of endogenous inflammatory cytokines to trigger a proportional therapeutic response. Cells were engineered into cartilaginous constructs that showed rapid activation and recovery in response to inflammation in vitro or in vivo. In the murine K/BxN model of inflammatory arthritis, bioengineered implants significantly mitigated disease severity as measured by joint pain, structural damage, and systemic and local inflammation. Therapeutic implants completely prevented increased pain sensitivity and bone erosions, a feat not achievable by current clinically available disease-modifying drugs. Combination tissue engineering and synthetic biology promises a range of potential applications for treating chronic diseases via custom-designed cells that express therapeutic transgenes in response to dynamically changing biological signals.

Clip Chemistry: Diverse (Bio)(macro)molecular and Material Function through Breaking Covalent Bonds

In the two decades since the introduction of the "click chemistry" concept, the toolbox of "click reactions" has continually expanded, enabling chemists, materials scientists, and biologists to rapidly and selectively build complexity for their applications of interest. Similarly, selective and efficient covalent bond breaking reactions have provided and will continue to provide transformative advances. Here, we review key examples and applications of efficient, selective covalent bond cleavage reactions, which we refer to herein as "clip reactions." The strategic application of clip reactions offers opportunities to tailor the compositions and structures of complex (bio)(macro)molecular systems with exquisite control. Working in concert, click chemistry and clip chemistry offer scientists and engineers powerful methods to address next-generation challenges across the chemical sciences.

Development of wound healing scaffolds with precisely-triggered sequential release of therapeutic nanoparticles

Natural bioactive cue profiles are generally transient with cues switching on/off to coordinate successful outcomes. Dysregulation of these sequences typically leads to disease. Successful wound healing, for example, should progress sequentially through hemostasis, inflammation, granulation tissue formation, and maturation. Chronic wounds, such as diabetic foot ulcers, suffer from uncoordinated signaling, and arrest and cycle between the inflammation and granulation stages. Traditionally, therapeutic delivery in tissue engineering has focused on sustaining delivery of key signaling factors; however, temporal and sequential delivery have increasingly come into focus. To fully take advantage of these signaling systems, a scaffold or matrix material that can house the delivery system is desirable. In this work, we functionalized a collagen-based scaffold - which has proven regenerative potential in wounds - with on-demand delivery of nanoparticles. Building on our previous work with ultrasound-responsive alginate that shows near-zero baseline release and a rapid release in response to an ultrasound trigger, we developed two novel scaffolds. In the first version, homogeneously-distributed microparticles of alginate were incorporated within the collagen-glycosaminoglycan (GAG) scaffold; ultrasound-triggered release of platelet derived growth factor (PDGF) loaded gold nanoparticles was demonstrated; and their maintained bioactivity confirmed. In the second version, pockets of alginate that can be individually loaded and triggered with ultrasound, were incorporated. The ability to sequentially release multiple therapeutics within these scaffolds using ultrasound was successfully confirmed. These platforms offer a precise and versatile way to deliver therapeutic nanoparticles within a proven regenerative template, and can be used to deliver and probe timed therapeutic delivery in wound healing and other tissue engineering applications.

Developing protein arginine methyltransferase 1 (PRMT1) inhibitor TC-E-5003 as an antitumor drug using INEI drug delivery systems

Injectable implants with the ability to form in situ are one of the most promising carriers for the delivery of chemotherapeutic drugs to tumor sites. We have reported a novel injectable in situ-forming implant system composed of n-butyl-2-cyanoacrylate (NBCA), ethyl oleate, along with the sol-gel phase transition. The chemotherapeutic drug-loaded injectable NBCA ethyl oleate implant (INEI) exhibited excellent therapeutic efficacy for local chemotherapy. Herein, we utilize this INEI to carry N, N'-(Sulfonyldi-4,1-phenylene)bis(2-chloroacetamide) (TE-C-5003), which is a selective protein arginine methyltransferase 1 (PRMT1) inhibitor, to treat the lung cancer mice model. The in vitro experiment shows that TE-C-5003 has a good anti-tumor effect on lung cancer (IC50 = 0.7022 µM for A549; IC50 = 0.6844 µM for NCL-H1299) and breast cancer (IC50 = 0.4128 µM for MCF-7; IC50 = 0.5965 µM for MDA-MB-231). Anti-tumor experiments in animal models showed that the average growth inhibition rate of xenografted human lung cancer cells by the TE-C-5003-loaded INEI (40% NBCA) was 68.23%, which is far more than TC-E-5003 alone (31.76%). Our study further confirms that INEI is an effective technique to improve the anti-tumor effect. The druggability of small molecule compounds can be improved with the help of the mentioned technology. Also, TC-E-5003 may be developed as a broad spectrum anti-tumor drug.

Progress and Prospects of Polymer-Based Drug Delivery Systems for Bone Tissue Regeneration

Despite the high regenerative capacity of bone tissue, there are some cases where bone repair is insufficient for a complete functional and structural recovery after damage. Current surgical techniques utilize natural and synthetic bone grafts for bone healing, as well as collagen sponges loaded with drugs. However, there are certain disadvantages associated with these techniques in clinical usage. To improve the therapeutic efficacy of bone tissue regeneration, a number of drug delivery systems based on biodegradable natural and synthetic polymers were developed and examined in in vitro and in vivo studies. Recent studies have demonstrated that biodegradable polymers play a key role in the development of innovative drug delivery systems and tissue engineered constructs, which improve the treatment and regeneration of damaged bone tissue. In this review, we discuss the most recent advances in the field of polymer-based drug delivery systems for the promotion of bone tissue regeneration and the physical-chemical modifications of polymers for controlled and sustained release of one or more drugs. In addition, special attention is given to recent developments on polymer nano- and microparticle-based drug delivery systems for bone regeneration.

Bright Infrared-to-Ultraviolet/Visible Upconversion in Small Alkaline Earth-Based Nanoparticles with Biocompatible CaF2 Shells

Upconverting nanoparticles (UCNPs) are promising candidates for photon-driven reactions, including light-triggered drug delivery, photodynamic therapy, and photocatalysis. Herein, we investigate the NIR-to-UV/visible emission of sub-15 nm alkaline-earth rare-earth fluoride UCNPs (M1-x Lnx F2+x, MLnF) with a CaF2 shell. We synthesize 8 alkaline-earth host materials doped with Yb3+ and Tm3+ , with alkaline-earth (M) spanning Ca, Sr, and Ba, MgSr, CaSr, CaBa, SrBa, and CaSrBa. We explore UCNP composition, size, and lanthanide doping-dependent emission, focusing on upconversion quantum yield (UCQY) and UV emission. UCQY values of 2.46 % at 250 W cm-2 are achieved with 14.5 nm SrLuF@CaF2 particles, with 7.3 % of total emission in the UV. In 10.9 nm SrYbF:1 %Tm3+ @CaF2 particles, UV emission increased to 9.9 % with UCQY at 1.14 %. We demonstrate dye degradation under NIR illumination using SrYbF:1 %Tm3+ @CaF2 , highlighting the efficiency of these UCNPs and their ability to trigger photoprocesses.

On-demand and tunable dual wavelength release of antibody using light-responsive hydrogels

There has been an increased interest in the use of protein therapeutics, especially antibodies, for the treatment of a variety of diseases due to their high specificity to tissues and biological pathways of interest. However, the use of antibodies can be hindered by physical aggregation, degradation, and diffusion when injected in vivo leading to the need for antibody-releasing depots for the controlled and localized delivery within tissues of interest. Here, we investigated photolabile hydrogel chemistries for creating on-demand and tunable antibody release profiles. Innovative, scalable synthetic procedures were established and applied for fabricating hydrogels with nitrobenzyl (NB) and coumarin (CMR) photolabile crosslinks that responded to clinically relevant doses of long-wavelength UV and short-wavelength visible light. This synthetic procedure includes a route to make a CMR linker possessing two functional handles at the same ring position with water-stable bonds. The photocleavage properties of NB and CMR crosslinked hydrogels were characterized, as well as their potential for translational studies by degradation through pig skin, a good human skin mimic. The mechanism of hydrogel degradation, bulk versus surface eroding, was determined to be dependent on the wavelength of light utilized and the molar absorptivity of the different photolabile linkers, providing a facile means for altering protein release upon hydrogel degradation. Further, the encapsulation and on-demand release of a model monoclonal antibody was demonstrated, highlighting the ability to control antibody release from these hydrogels through the application of light while retaining its bioactivity. In particular, the newly designed CMR hydrogels undergo surface erosion-based protein release using visible light, which is more commonly used clinically. Overall, this work establishes scalable syntheses and relevant pairings of formulation-irradiation conditions for designing on-demand and light-responsive material systems that provide controlled, tunable release of bioactive proteins toward addressing barriers to preclinical translation of light-based materials and ultimately improving therapeutic regimens.

Spatiotemporally Controlling the Release of Biological Effectors Enhances Their Effects on Cell Migration and Neurite Outgrowth

It is a major challenge to coordinate topographic cues from scaffolds with the on-demand, sustained release of biological effectors to maximize their performance in tissue regeneration. Here, a system involving masked, photo-triggered release of biological effectors from a temperature-sensitive scaffold for augmented cell migration and neurite outgrowth is reported. The scaffold contains microparticles of a phase-change material (PCM) sandwiched between two layers of electrospun fibers. The biological effectors are co-loaded with a photothermal dye in the PCM microparticles. Under irradiation with a near-infrared laser, the PCM will be melted to swiftly release the biological effectors. By imposing a photomask between the scaffold and the laser, only those microparticles in the irradiated region are melted, enabling a spatial control over the release. By adjusting the photomask, different regions of the scaffold can be sequentially irradiated at designated times, realizing on-demand and sustained release of the biological effectors with spatiotemporal controls. In one demonstration, this method is used to accelerate the directional migration of NIH-3T3 fibroblasts along the uniaxial or radial direction of fiber alignment by controlling the release of epidermal growth factor. In another demonstration, the release of nerve growth factor is managed to significantly promote neurite outgrowth from PC12 cells.

Target-Specific Superparamagnetic Hydrogel with Excellent pH Sensitivity and Reversibility: A Promising Platform for Biomedical Applications

Superparamagnetism has been widely used for many biomedical applications, such as early detection of inflammatory cancer and diabetes, magnetic resonance imaging (MRI), hyperthermia, etc., whereas incorporation of superparamagnetism in stimulus-responsive hydrogels has now gained substantial interest and attention for application in these fields. Recently, pH-responsive superparamagnetic hydrogels showing the potential use in disease diagnosis, biosensors, polymeric drug carriers, and implantable devices, have been developed based on the fact that pH is an important environmental factor in the body and some disease states manifest themselves by a change in the pH value. However, improvement in pH sensitivity of magnetic hydrogels is a dire need for their practical applications. In this study, we report the distinctly high pH sensitivity of new synthesized dual-responsive magnetic hydrogel nanocomposites, which was accomplished by copolymerization (free-radical polymerization) of two pH-sensitive monomers, acrylic acid (AA) and vinylsulfonic acid (VSA) with an optimum ratio, in the presence of presynthesized superparamagnetic iron oxide nanoparticles (Fe3O4(OH) x ). The monomers contain pH-sensitive functional groups (COO- and SO3 - for AA and VSA, respectively), and they have also been widely used as biomaterials because of the good biocompatibility. The pH sensitivity of the superparamagnetic hydrogel, poly(acrylic acid-co-vinylsulfonic acid), PAAVSA/Fe3O4, was investigated by swelling studies at different pH values from pH 7 to 1.4. Distinct pH reversibility of the system was also demonstrated through swelling/deswelling analysis. Thermal stability, chemical configuration, magnetic response, and structural properties of the system have been explored by suitable characterization techniques. Furthermore, the study reveals a pH-responsive significant change in the overall morphology and packing fraction of iron oxide nanoparticles in PAAVSA/Fe3O4 via energy-dispersive X-ray (EDX) elemental mapping with the field emission scanning electron microscopy (FESEM) study (for freeze-dried PAAVSA/Fe3O4, swelled at different pH values), implying a drastic change in susceptibility and induced saturation magnetization of the system. These important features could be easily utilized for the purpose of diagnosis using magnetic probe and/or impedance analysis techniques.

Controlled anti-cancer drug release through advanced nano-drug delivery systems: Static and dynamic targeting strategies

Advances in nanomedicine, including early cancer detection, targeted drug delivery, and personalized approaches to cancer treatment are on the rise. For example, targeted drug delivery systems can improve intracellular delivery because of their multifunctionality. Novel endogenous-based and exogenous-based stimulus-responsive drug delivery systems have been proposed to prevent the cancer progression with proper drug delivery. To control effective dose loading and sustained release, targeted permeability and individual variability can now be described in more-complex ways, such as by combining internal and external stimuli. Despite these advances in release control, certain challenges remain and are identified in this research, which emphasizes the control of drug release and applications of nanoparticle-based drug delivery systems. Using a multiscale and multidisciplinary approach, this study investigates and analyzes drug delivery and release strategies in the nanoparticle-based treatment of cancer, both mathematically and clinically.

Phase-Change Materials for Controlled Release and Related Applications

Phase-change materials (PCMs) have emerged as a novel class of thermo-responsive materials for controlled release, where the payloads encapsulated in a solid matrix are released only upon melting the PCM to trigger a solid-to-liquid phase transition. Herein, the advances over the past 10 years in utilizing PCMs as a versatile platform for the encapsulation and release of various types of therapeutic agents and biological effectors are highlighted. A brief introduction to PCMs in the context of desired properties for controlled release and related applications is provided. Among the various types of PCMs, a specific focus is placed on fatty acids and fatty alcohols for their natural availability, low toxicity, biodegradability, diversity, high abundance, and low cost. Then, various methods capable of processing PCMs, and their mixtures with payloads, into stable suspensions of colloidal particles, and the different means for triggering the solid-to-liquid phase transition are discussed. Finally, a range of applications enabled by the controlled release system based on PCMs are presented together with some perspectives on future directions.

Nanoscale delivery systems for microRNAs in cancer therapy

Concomitant with advances in research regarding the role of miRNAs in sustaining carcinogenesis, major concerns about their delivery options for anticancer therapies have been raised. The answer to this problem may come from the world of nanoparticles such as liposomes, exosomes, polymers, dendrimers, mesoporous silica nanoparticles, quantum dots and metal-based nanoparticles which have been proved as versatile and valuable vehicles for many biomolecules including miRNAs. In another train of thoughts, the general scheme of miRNA modulation consists in inhibition of oncomiRNA expression and restoration of tumor suppressor ones. The codelivery of two miRNAs or miRNAs in combination with chemotherapeutics or small molecules was also proposed. The present review presents the latest advancements in miRNA delivery based on nanoparticle-related strategies.

Injectable in Situ Forming Hydrogels of Thermosensitive Polypyrrole Nanoplatforms for Precisely Synergistic Photothermo-Chemotherapy

The combination of photothermal therapy (PTT) with chemotherapy has great potential to maximize the synergistic effect of thermo-induced chemosensitization and improve treatment performance. To achieve high drug-loading capacity as well as precise synchronization between the controllable release of chemotherapeutics and the duration of near-infrared PTT, in this work, a facile one-step method was first developed to fabricate a novel injectable in situ forming photothermal modulated hydrogel drug delivery platform (D-PPy@PNAs), in which a PNIPAM-based temperature-sensitive acidic triblock polymer [poly(acrylic acid-b-N-isopropylamide-b-acrylic acid (PNA)] was utilized as the stabilizing agent in the polymerization of polypyrrole (PPy). The in situ forming hydrogels showed a sensitive temperature-responsive sol-gel phase-transition behavior, as well as an excellent photothermal property. The strong interaction of ionic bonds together with π-π stacking interactions resulted in high doxorubicin (DOX) loading capacity and controlled/sustained drug release behavior. In addition, D-PPy@PNAs also displayed enhanced cellular uptake and promoted intratumoral penetration of DOX upon NIR laser irradiation. The synergistic photothermal therapy-chemotherapy of D-PPy@PNA hydrogels greatly improved the antitumor efficacy in vivo. Therefore, thermosensitive polypyrrole-based D-PPy@PNA hydrogels may be powerful drug delivery nanoplatforms for precisely synergistic photothermo-chemotherapy of tumors.

Advances in local and systemic drug delivery systems for post-surgical cancer treatment

Graphical representation of local and systemic drug delivery systems.

Integration of biological systems with electronic-mechanical assemblies

Biological systems continuously interact with the surrounding environment because they are dynamically evolving. The interaction is achieved through mechanical, electrical, chemical, biological, thermal, optical, or a synergistic combination of these cues. To provide a fundamental understanding of the interaction, recent efforts that integrate biological systems with the electronic-mechanical assemblies create unique opportunities for simultaneous monitoring and eliciting the responses to the biological system. Recent innovations in materials, fabrication processes, and device integration approaches have created the enablers to yield bio-integrated devices to interface with the biological system, ranging from cells and tissues to organs and living individual. In this short review, we will provide a brief overview of the recent development on the integration of the biological systems with electronic-mechanical assemblies across multiple scales, with applications ranging from healthcare monitoring to therapeutic options such as drug delivery and rehabilitation therapies. STATEMENT OF SIGNIFICANCE: An overview of the recent progress on the integration of the biological system with both electronic and mechanical assemblies is discussed. The integration creates the unique opportunity to simultaneously monitor and elicit the responses to the biological system, which provides a fundamental understanding of the interaction between the biological system and the electronic-mechanical assemblies. Recent innovations in materials, fabrication processes, and device integration approaches have created the enablers to yield bio-integrated devices to interface with the biological system, ranging from cells and tissues to organs and living individual.

Recent advances in musculoskeletal local drug delivery

Musculoskeletal disorders are a significant burden on the global economy and public health. Advanced drug delivery plays a key role in the musculoskeletal field and holds the promise of enhancing the repair of degenerated and injured musculoskeletal tissues. Ideally, drug delivery should have the ability to directly deliver therapeutic agents to the diseased/injured sites with a desirable drug level over a period of time. Here, we present a mini-review of the current state-of-the-art research associated with local drug delivery and its use for the treatment of musculoskeletal disorders. First, an overview of drug delivery strategies, with a focus on issues related to musculoskeletal pathology, potential therapeutic strategies, conventional and non-conventional drugs, and various delivery systems, is introduced. Then, we highlight recent advances in the emerging fields of musculoskeletal local drug delivery, involving therapeutic drugs (e.g., genes, small molecule therapeutics, and stem cells), novel delivery vehicles (e.g., 3D printing and tissue engineering techniques), and innovative delivery approaches (e.g., multi-drug delivery and smart stimuli-responsive delivery). The review concludes with future perspectives and associated challenges for developing local drug delivery for musculoskeletal applications. STATEMENT OF SIGNIFICANCE: Three important aspects are highlighted in this manuscript: 1) The advanced musculoskeletal drug delivery is introduced from the aspects ranging from musculoskeletal disorders, potential therapeutic solutions, and various drug delivery systems. 2) The recent advances in the emerging fields of musculoskeletal local drug delivery, involving therapeutic drugs (e.g., genes, small molecule therapeutics, and stem cells), novel delivery vehicles (e.g., 3D printing and tissue engineering technique), and innovative delivery approaches (e.g., multi-drug delivery and smart stimuli-responsive delivery), are highlighted. 3) The challenges and perspectives of future research directions in the development of musculoskeletal local drug delivery are presented.

Bioinspired mechanically active adhesive dressings to accelerate wound closure

Inspired by embryonic wound closure, we present mechanically active dressings to accelerate wound healing. Conventional dressings passively aid healing by maintaining moisture at wound sites. Recent developments have focused on drug and cell delivery to drive a healing process, but these methods are often complicated by drug side effects, sophisticated fabrication, and high cost. Here, we present novel active adhesive dressings consisting of thermoresponsive tough adhesive hydrogels that combine high stretchability, toughness, tissue adhesion, and antimicrobial function. They adhere strongly to the skin and actively contract wounds, in response to exposure to the skin temperature. In vitro and in vivo studies demonstrate their efficacy in accelerating and supporting skin wound healing. Finite element models validate and refine the wound contraction process enabled by these active adhesive dressings. This mechanobiological approach opens new avenues for wound management and may find broad utility in applications ranging from regenerative medicine to soft robotics.

Microparticle Depots for Controlled and Sustained Release of Endosomolytic Nanoparticles

Introduction

Nucleic acids have gained recognition as promising immunomodulatory therapeutics. However, their potential is limited by several drug delivery barriers, and there is a need for technologies that enhance intracellular delivery of nucleic acid drugs. Furthermore, controlled and sustained release is a significant concern, as the kinetics and localization of immunomodulators can influence resultant immune responses. Here, we describe the design and initial evaluation of poly(lactic-co-glycolic) acid (PLGA) microparticle (MP) depots for enhanced retention and sustained release of endosomolytic nanoparticles that enable the cytosolic delivery of nucleic acids.

Methods

Endosomolytic p[DMAEMA]_10kD-bl-[PAA_0.3-co-DMAEMA_0.3-co-BMA_0.4]_25kD diblock copolymers were synthesized by reversible addition-fragmentation chain transfer polymerization. Polymers were electrostatically complexed with nucleic acids and resultant nanoparticles (NPs) were encapsulated in PLGA MPs. To modulate release kinetics, ammonium bicarbonate was added as a porogen. Release profiles were quantified in vitro and in vivo via quantification of fluorescently-labeled nucleic acid. Bioactivity of released NPs was assessed using small interfering RNA (siRNA) targeting luciferase as a representative nucleic acid cargo. MPs were incubated with luciferase-expressing 4T1 (4T1-LUC) breast cancer cells in vitro or administered intratumorally to 4T1-LUC breast tumors, and silencing via RNA interference was quantified via longitudinal luminescence imaging.

Results

Endosomolytic NPs complexed to siRNA were effectively loaded into PLGA MPs and release kinetics could be modulated in vitro and in vivo via control of MP porosity, with porous MPs exhibiting faster cargo release. In vitro, release of NPs from porous MP depots enabled sustained luciferase knockdown in 4T1 breast cancer cells over a five-day treatment period. Administered intratumorally, MPs prolonged the retention of nucleic acid within the injected tumor, resulting in enhanced and sustained silencing of luciferase relative to a single bolus administration of NPs at an equivalent dose.

Conclusion

This work highlights the potential of PLGA MP depots as a platform for local release of endosomolytic polymer NPs that enhance the cytosolic delivery of nucleic acid therapeutics.

In vivo temperature-sensitive drug release system trigged by cooling using low-melting-point microcrystalline wax

Temperature-sensitive formulations are attractive controlled-release formulations, which release an incorporated drug by changes in body temperature induced by external temperature stimulation. Recently, it has been reported that wax matrix (WM) particles composed of a low-melting-point microcrystalline wax (MCW) released only a small amount of the drug at 37 °C, whereas faster drug release occurred at 25 °C. In this study, temperature-sensitive formulations composed of low-melting-point MCW that release drugs triggered by cooling, rather than heating, were developed. In an in vitro dissolution test in which the test medium was repeatedly cooled from 37 to 25 °C, control of the promotion and suppression of drug release was achieved. The drug concentration in the plasma of rats administered the particles was significantly increased by cooling compared with non-cooling, indicating that the drug release from the particles was promoted by cooling both in vitro and in vivo. Therefore, particles composed of low-melting-point MCW should be useful for the development of cooling-triggered, temperature-sensitive formulations.

Nano-, micro-, and macroscale drug delivery systems for cancer immunotherapy

Immunotherapy is moving to the frontier of cancer treatment. Drug delivery systems (DDSs) have greatly advanced the development of cancer immunotherapeutic regimen and combination treatment. DDSs can spatiotemporally present tumor antigens, drugs, immunostimulatory molecules, or adjuvants, thus enabling the modulation of immune cells including dendritic cells (DCs) or T-cells directly in vivo and thereby provoking robust antitumor immune responses. Cancer vaccines, immune checkpoint blockade, and adoptive cell transfer have shown promising therapeutic efficiency in clinic, and the incorporation of DDSs may further increase antitumor efficiency while decreasing adverse side effects. This review focuses on the use of nano-, micro-, and macroscale DDSs for co-delivery of different immunostimulatory factors to reprogram the immune system to combat cancer. Regarding to nanoparticle-based DDSs, we emphasize the nanoparticle-based tumor immune environment modulation or as an addition to gene therapy, photodynamic therapy, or photothermal therapy. For microparticle or capsule-based DDSs, an overview of the carrier type, fabrication approach, and co-delivery of tumor vaccines and adjuvants is introduced. Finally, macroscale DDSs including hydrogels and scaffolds are also included and their role in personalized vaccine delivery and adoptive cell transfer therapy are described. Perspective and clinical translation of DDS-based cancer immunotherapy is also discussed. We believe that DDSs hold great potential in advancing the fundamental research and clinical translation of cancer immunotherapy. STATEMENT OF SIGNIFICANCE: Immunotherapy is moving to the frontier of cancer treatment. Drug delivery systems (DDSs) have greatly advanced the development of cancer immunotherapeutic regimen and combination treatment. In this comprehensive review, we focus on the use of nano-, micro-, and macroscale DDSs for the co-delivery of different immunostimulatory factors to reprogram the immune system to combat cancer. We also propose the perspective on the development of next-generation DDS-based cancer immunotherapy. This review indicates that DDSs can augment the antitumor T-cell immunity and hold great potential in advancing the fundamental research and clinical translation of cancer immunotherapy by simultaneously delivering dual or multiple immunostimulatory drugs.