Controlling the hydration rate of a hydrophilic matrix in the core of an intravaginal ring determines antiretroviral release

Refining the in vitro release test method for a dapivirine-releasing vaginal ring to match in vivo performance

Previously reported in vitro release test methods for drug-releasing vaginal rings containing poorly water-soluble drugs have described use of water-alcohol systems or surfactant solutions in efforts to maintain sink conditions. Here, as part of efforts to more closely match in vitro and in vivo release for the 25 mg dapivirine matrix-type silicone elastomer vaginal ring for HIV prevention, we have investigated alternatives to the 1:1 v/v water/isopropanol medium described previously. Specifically, we evaluated dapivirine release from rings into (i) monophasic water/isopropanol mixtures of varying compositions and (ii) biphasic buffer/octanol systems using pH 4.2 and pH 7.0 buffers. The rate and mechanism of dapivirine release were dependent upon the isopropanol concentration in the release medium, in accordance with the observed trend in drug solubility. At 0 and 10% v/v isopropanol concentrations, dapivirine release followed a partition-controlled mechansim. For media containing ≥ 20% v/v isopropanol, in vitro release of dapivirine was significantly increased and obeyed permeation-controlled kinetics. Cumulative release of ~3.5 mg dapivirine over 28 days was obtained using a water isopropanol mixture containing 20% v/v isopropanol, similar to the ~4 mg dapivirine released in vivo. Dapivirine release into the biphasic buffer/octanol system (intended to mimic the fluid/tissue environment in vivo) was constrained by the limited solubility of dapivirine in the buffer component in which the ring resided, such that cumulative dapivirine release was consistently lower than that observed with the 20% v/v isopropanol in water medium. Release into the biphasic system was also pH dependent, in line with dapivirine's pK_a and with potential implications for in vivo release and absorption in women with elevated vaginal pH.

The Vaginal Microbiota, Bacterial Biofilms and Polymeric Drug-Releasing Vaginal Rings

The diversity and dynamics of the microbial species populating the human vagina are increasingly understood to play a pivotal role in vaginal health. However, our knowledge about the potential interactions between the vaginal microbiota and vaginally administered drug delivery systems is still rather limited. Several drug-releasing vaginal ring products are currently marketed for hormonal contraception and estrogen replacement therapy, and many others are in preclinical and clinical development for these and other clinical indications. As with all implantable polymeric devices, drug-releasing vaginal rings are subject to surface bacterial adherence and biofilm formation, mostly associated with endogenous microorganisms present in the vagina. Despite more than 50 years since the vaginal ring concept was first described, there has been only limited study and reporting around bacterial adherence and biofilm formation on rings. With increasing interest in the vaginal microbiome and vaginal ring technology, this timely review article provides an overview of: (i) the vaginal microbiota, (ii) biofilm formation in the human vagina and its potential role in vaginal dysbiosis, (iii) mechanistic aspects of biofilm formation on polymeric surfaces, (iv) polymeric materials used in the manufacture of vaginal rings, (v) surface morphology characteristics of rings, (vi) biomass accumulation and biofilm formation on vaginal rings, and (vii) regulatory considerations.

In Vitro Methods for Evaluating Drug Release of Vaginal Ring Formulations-A Critical Review

The vagina is a promising site for both local and systemic drug delivery and represents an interesting administration route for compounds with poor oral bioavailability. Whereas most of the currently marketed dosage forms were designed as immediate release formulations, intravaginal rings (IVRs) offer the possibility of a controlled vaginal drug delivery over several weeks or months. For a long time, the development of IVRs was limited to steroid-releasing formulations. Recently, IVRs have witnessed a surge of new interest as promising delivery systems for microbicides. Therefore, various novel IVR designs have been introduced. To ensure that only safe and effective IVRs will be administered to patients, it is important to properly distinguish between IVRs with desired and undesired release performance. In vitro methods for evaluating drug release of IVRs that present with sufficient predictive capacity for in vivo drug release, and discriminatory power with regard to IVRs quality, are an essential tool for this purpose. The objective of the present review article is to present the current status of in vitro drug release testing of IVRs and to critically discuss current compendial and non-official in vitro drug release methods with regard to their discriminatory power and in vivo predictivity.

Vaginal rings with exposed cores for sustained delivery of the HIV CCR5 inhibitor 5P12-RANTES

Antiretroviral-releasing vaginal rings are at the forefront of ongoing efforts to develop microbicide-based strategies for prevention of heterosexual transmission of the human immunodeficiency virus (HIV). However, traditional ring designs are generally only useful for vaginal administration of relatively potent, lipophilic, and small molecular weight drug molecules that have sufficient permeability in the non-biodegradable silicone elastomer or thermoplastic polymers. Here, we report a novel, easy-to-manufacture 'exposed-core' vaginal ring that provides sustained release of the protein microbicide candidate 5P12-RANTES, an experimental chemokine analogue that potently blocks the HIV CCR5 coreceptor. In vitro release, mechanical, and stability testing demonstrated the utility and practicality of this novel ring design. In a sheep pharmacokinetic model, a ring containing two ¼-length excipient-modified silicone elastomer cores - each containing lyophilised 5P12-RANTES and exposed to the external environment by two large windows - provided sustained concentrations of 5P12-RANTES in vaginal fluid and vaginal tissue between 10 and 10,000 ng/g over 28days, at least 50 and up to 50,000 times the reported in vitro IC50 value.

Setting up multivariate specifications on critical raw material attributes to ensure consistent drug dissolution from high drug-load sustained-release matrix tablet

The purpose of this study was to describe the raw material variability that influenced the in-vitro dissolution behavior of high drug-load sustained-release matrix tablet and to ensure the consistent quality of the final product. The Panax notoginseng saponins (PNS) - hydroxypropyl methylcellulose - anhydrous lactose - magnesium stearate (57:20:23:0.5%, w/w) was used as the model formulation. PNS extract powders with lot-to-lot and source-to-source differences were collected to cover the common cause variations and their physicochemical properties were characterized by the chromatographic fingerprints and the SeDeM expert system. It was found that the release behavior of active pharmaceutical ingredients (APIs) in PNS from different batches exhibited considerable variations. Latent variable modeling results demonstrated that the physical properties of raw materials played major roles in predicting the drug dissolution. PNS extracts with high specific surface area, the width of particle size distribution and hygroscopicity or low moisture content led to an increase in drug release. In order to perform efficient pass/fail judgments for incoming new materials, multivariate specifications of critical material attributes (CMAs) were established and the multivariate design space in line with the quality by design (QbD) principles was explored to achieve the release target.

Sustained Release Drug Delivery Applications of Polyurethanes

Since their introduction over 50 years ago, polyurethanes have been applied to nearly every industry. This review describes applications of polyurethanes to the development of modified release drug delivery. Although drug delivery research leveraging polyurethanes has been ongoing for decades, there has been renewed and substantial interest in the field in recent years. The chemistry of polyurethanes and the mechanisms of drug release from sustained release dosage forms are briefly reviewed. Studies to assess the impact of intrinsic drug properties on release from polyurethane-based formulations are considered. The impact of hydrophilic water swelling polyurethanes on drug diffusivity and release rate is discussed. The role of pore formers in modulating drug release rate is examined. Finally, the value of assessing mechanical properties of the dosage form and approaches taken in the literature are described.

Implant delivering hydroxychloroquine attenuates vaginal T lymphocyte activation and inflammation

Evidence suggests that women who are naturally resistant to HIV infection exhibit low baseline immune activation at the female genital tract (FGT). This "immune quiescent" state is associated with lower expression of T-cell activation markers, reduced levels of gene transcription and pro-inflammatory cytokine or chemokine production involved in HIV infection while maintaining an intact immune response against pathogens. Therefore, if this unique immune quiescent state can be pharmacologically induced locally, it will provide an excellent women-oriented strategy against HIV infection To our knowledge, this is the first research article evaluating in vivo, an innovative trackable implant that can provide controlled delivery of hydroxychloroquine (HCQ) to successfully attenuate vaginal T lymphocyte activation and inflammation in a rabbit model as a potential strategy to induce an "immune quiescent" state within the FGT for the prevention of HIV infection. This biocompatible implant can deliver HCQ above therapeutic concentrations in a controlled manner, reduce submucosal immune cell recruitment, improve mucosal epithelium integrity, decrease protein and gene expression of T-cell activation markers, and attenuate the induction of key pro-inflammatory mediators. Our results suggest that microbicides designed to maintain a low level of immune activation at the FGT may offer a promising new strategy for reducing HIV infection.

A Dose Ranging Pharmacokinetic Evaluation of IQP-0528 Released from Intravaginal Rings in Non-Human Primates

PURPOSE

Design of intravaginal rings (IVRs) for delivery of antiretrovirals is often guided by in vitro release under sink conditions, based on the assumption that in vivo release will follow a similar release profile.

METHODS

We conducted a dose-ranging study in the female reproductive tract of pigtail macaques using matrix IVRs containing IQP-0528, a poorly soluble but highly potent antiretroviral drug with an IC₉₀ of 146 ng/mL. These IVRs consisted of drug-loaded segments, 15.6% IQP-0528 in Tecoflex 85A, comprising either all, half, or a quarter of the entire ring.

RESULTS

In vitro release under sink conditions demonstrates loading-proportional release, with a cumulative 30-day release of 48.5 ± 2.2 mg for our 100% loaded ring, 24.8 ± .36 mg from our 50% loaded ring, and 13.99 ± 1.58 mg from our 25% loaded ring. In vivo, while drug concentration in vaginal fluid is well in excess of IQP-0528's EC₉₀, we find no statistical difference between the different ring loadings in either swab drug levels or drug released from our rings.

CONCLUSIONS

We show that in vitro release may not accurately reflect in vivo release, particularly for poorly soluble drugs. All tested loadings of our IVRs are capable of delivering IQP-0528 well in excess of the IC₉₀.

Past, Present, and Future Drug Delivery Systems for Antiretrovirals

The human immunodeficiency virus has infected millions of people and the epidemic continues to grow rapidly in some parts of the world. Antiretroviral (ARV) therapy has provided improved treatment and prolonged the life expectancy of patients. Moreover, there is growing interest in using ARVs to protect against new infections. Hence, ARVs have emerged as our primary strategy in combating the virus. Unfortunately, several challenges limit the optimal performance of these drugs. First, ARVs often require life-long use and complex dosing regimens. This results in low patient adherence and periods of lapsed treatment manifesting in drug resistance. This has prompted the development of alternate dosage forms such as vaginal rings and long-acting injectables that stand to improve patient adherence. Another problem central to therapeutic failure is the inadequate penetration of drugs into infected tissues. This can lead to incomplete treatment, development of resistance, and viral rebound. Several strategies have been developed to improve drug penetration into these drug-free sanctuaries. These include encapsulation of drugs in nanoparticles, use of pharmacokinetic enhancers, and cell-based drug delivery platforms. In this review, we discuss issues surrounding ARV therapy and their impact on drug efficacy. We also describe various drug delivery-based approaches developed to overcome these issues.