Control of liposomes diameter at micrometric and nanometric level using a supercritical assisted technique

Liposomes, transfersomes and niosomes: production methods and their applications in the vaccinal field

One of the most effective strategies to fight viruses and handle health diseases is vaccination. Recent studies and current applications are moving on antigen, DNA and RNA-based vaccines to overcome the limitations related to the conventional vaccination strategies, such as low safety, necessity of multiple injection, and side effects. However, due to the instability of pristine antigen, RNA and DNA molecules, the use of nanocarriers is required. Among the different nanocarriers proposed for vaccinal applications, three types of nanovesicles were selected and analysed in this review: liposomes, transfersomes and niosomes. PubMed, Scopus and Google Scholar databases were used for searching recent papers on the most frequently used conventional and innovative methods of production of these nanovesicles. Weaknesses and limitations of conventional methods (i.e., multiple post-processing, solvent residue, batch-mode processes) can be overcome using innovative methods, in particular, the ones assisted by supercritical carbon dioxide. SuperSomes process emerged as a promising production technique of solvent-free nanovesicles, since it can be easily scaled-up, works in continuous-mode, and does not require further post-processing steps to obtain the desired products. As a result of the literature analysis, supercritical carbon dioxide assisted methods attracted a lot of interest for nanovesicles production in the vaccinal field. However, despite their numerous advantages, supercritical processes require further studies for the production of liposomes, transfersomes and niosomes with the aim of reaching well-defined technologies suitable for industrial applications and mass production of vaccines.

Current Applications of Liposomes for the Delivery of Vitamins: A Systematic Review

Liposomes have been used for several decades for the encapsulation of drugs and bioactives in cosmetics and cosmeceuticals. On the other hand, the use of these phospholipid vesicles in food applications is more recent and is increasing significantly in the last ten years. Although in different stages of technological maturity-in the case of cosmetics, many products are on the market-processes to obtain liposomes suitable for the encapsulation and delivery of bioactives are highly expensive, especially those aiming at scaling up. Among the bioactives proposed for cosmetics and food applications, vitamins are the most frequently used. Despite the differences between the administration routes (oral for food and mainly dermal for cosmetics), some challenges are very similar (e.g., stability, bioactive load, average size, increase in drug bioaccessibility and bioavailability). In the present work, a systematic review of the technological advancements in the nanoencapsulation of vitamins using liposomes and related processes was performed; challenges and future perspectives were also discussed in order to underline the advantages of these drug-loaded biocompatible nanocarriers for cosmetics and food applications.

Lipid-Based Drug Delivery Systems for Diseases Managements

Liposomes are tiny lipid-based vesicles composed of one or more lipid bilayers, which facilitate the encapsulation of hydrophilic, lipophilic, and amphiphilic biological active agents. The description of the physicochemical properties, formulation methods, characteristics, mechanisms of action, and large-scale manufacturing of liposomes as delivery systems are deeply discussed. The benefits, toxicity, and limitations of the use of liposomes in pharmacotherapeutics including in diagnostics, brain targeting, eye and cancer diseases, and in infections are provided. The experimental approaches that may reduce, or even bypass, the use of liposomal drug drawbacks is described. The application of liposomes in the treatment of numerous diseases is discussed.

Drug Carriers: A Review on the Most Used Mathematical Models for Drug Release

Carriers are protective transporters of drugs to target cells, facilitating therapy under each points of view, such as fast healing, reducing infective phenomena, and curing illnesses while avoiding side effects. Over the last 60 years, several scientists have studied drug carrier properties, trying to adapt them to the release environment. Drug/Carrier interaction phenomena have been deeply studied, and the release kinetics have been modeled according to the occurring phenomena involved in the system. It is not easy to define models’ advantages and disadvantages, since each of them may fit in a specific situation, considering material interactions, diffusion and erosion phenomena, and, no less important, the behavior of receiving medium. This work represents a critical review on main mathematical models concerning their dependency on physical, chemical, empirical, or semi-empirical variables. A quantitative representation of release profiles has been shown for the most representative models. A final critical comment on the applicability of these models has been presented at the end. A mathematical approach to this topic may help students and researchers approach the wide panorama of models that exist in literature and have been optimized over time. This models list could be of practical inspiration for the development of researchers’ own new models or for the application of proper modifications, with the introduction of new variable dependency.

Recent Advances in Antimicrobial Nano-Drug Delivery Systems

Infectious diseases are among the major health issues of the 21st century. The substantial use of antibiotics over the years has contributed to the dissemination of multidrug resistant bacteria. According to a recent report by the World Health Organization, antibacterial (ATB) drug resistance has been one of the biggest challenges, as well as the development of effective long-term ATBs. Since pathogens quickly adapt and evolve through several strategies, regular ATBs usually may result in temporary or noneffective treatments. Therefore, the demand for new therapies methods, such as nano-drug delivery systems (NDDS), has aroused huge interest due to its potentialities to improve the drug bioavailability and targeting efficiency, including liposomes, nanoemulsions, solid lipid nanoparticles, polymeric nanoparticles, metal nanoparticles, and others. Given the relevance of this subject, this review aims to summarize the progress of recent research in antibacterial therapeutic drugs supported by nanobiotechnological tools.

A Comprehensive Review on Novel Liposomal Methodologies, Commercial Formulations, Clinical Trials and Patents

Liposomes are well-recognized and essential nano-sized drug delivery systems. Liposomes are phospholipid vesicles comprised of cell membrane components and have been employed as artificial cell models to mimic structure and functions of cells and are of immense use in various biological analyses. Liposomes acquire great advantages and provide wide range of applications as useful drug carriers in pre-clinical and clinical trials. This review summarizes exclusively on scalable techniques for liposome preparation and focuses on the strengths and limitations with respect to industrial applicability. Also, this review discusses the updated recent advancements in biomedical applications with a mention of key highlights of commercially available formulations, clinical trials and patents in recent past. Furthermore, this review also provides brief information of the classification, composition and characterization of liposomes.

Environmental and Sustainability Analysis of a Supercritical Carbon Dioxide-Assisted Process for Pharmaceutical Applications

Drug delivery systems (DDS) are artificial devices employed to enhance drug bioavailability during administration to a human body. Among DDS, liposomes are spherical vesicles made of an aqueous core surrounded by phospholipids. Conventional production methods are characterized by several drawbacks; therefore, Supercritical assisted Liposome formation (SuperLip) has been developed to overcome these problems. Considering that the use of high pressures involves high energy cost, in this paper, sustainability indicators were calculated to quantitatively evaluate the emissions related to the attainment of liposomes containing daunorubicin (a model antibiotic drug) using the SuperLip process. The indicators were depicted using a spider diagram to raise the actual weaknesses of this technique; some variations were proposed in the process layout to solve the critical issues. According to the literature, many studies related to the pharmaceutical industry are expressed in terms of solid, liquid waste, and toxic emissions; however, liposomes have never explicitly been considered for an analysis of environmental sustainability.

Effect of the Carrier on the Coprecipitation of Curcumin through Supercritical-Assisted Atomization

In this paper, composite systems containing curcumin (CUR) were prepared through supercritical-assisted atomization (SAA), using different carriers. Curcumin is particularly interesting in the pharmaceutical and nutraceutical fields for its antioxidant, antitumoral, and anti-inflammatory properties. However, its therapeutic effect on human health is restricted by its poor water solubility and low dissolution rate, limiting its absorption after its oral administration. To increase the dissolution rate and then the bioavailability of the active compound, CUR was coprecipitated with polymeric, i.e., polyvinylpyrrolidone (PVP) and dextran (DXT), and not polymeric, i.e., hydroxypropyl-β-cyclodextrin (HP-β-CD), carriers. The effects of some operating parameters, namely the concentration of solutes in solution and the active compound/carrier ratio, on the morphology and the particle size distribution of the powders were investigated. Submicrometric particles were produced with all the carriers. Under the best operating conditions, the mean diameters ± standard deviation were equal to 0.69 ± 0.20 μm, 0.40 ± 0.13 μm, and 0.81 ± 0.25 μm for PVP/CUR, DXT/CUR, and HP-β-CD/CUR, respectively. CUR dissolution rates from coprecipitated particles were significantly increased in the case of all the carriers. Therefore, the results are exciting from a pharmaceutical and nutraceutical point of view, to produce supplements containing curcumin, but assuring a high dissolution rate and bioavailability and, consequently, a more effective therapeutic effect.

Preparation of Liposomes from Soy Lecithin Using Liquefied Dimethyl Ether

We investigated a method to prepare liposomes; soy lecithin was dissolved in liquefied dimethyl ether (DME) at 0.56 MPa, which was then injected into warm water. Liposomes can be successfully prepared at warm water temperatures above 45 °C. The transmission electron microscopy (TEM) images of the obtained liposomes, size distribution, ζ-potential measurements by dynamic light scattering and the amount of residual medium were compared by gas chromatography using the conventional medium, diethyl ether. The size of the obtained liposomes was approximately 60-300 nm and the ζ-potential was approximately -57 mV, which was almost the same as that of the conventional medium. Additionally, for the conventional media, a large amount remained in the liposome dispersion even after removal by depressurization and dialysis membrane treatment; however, liquefied DME, owing to its considerably low boiling point, was completely removed by depressurization. Liquefied DME is a very attractive medium for the preparation of liposomes because it does not have the toxicity and residue problems of conventional solvents or the hazards of ethanol addition and high pressure of supercritical carbon dioxide; it is also environmentally friendly.

Mechanisms and Pharmaceutical Action of Lipid Nanoformulation of Natural Bioactive Compounds as Efficient Delivery Systems in the Therapy of Osteoarthritis

Osteoarthritis (OA) is a degenerative joint disease. An objective of the nanomedicine and drug delivery systems field is to design suitable pharmaceutical nanocarriers with controllable properties for drug delivery and site-specific targeting, in order to achieve greater efficacy and minimal toxicity, compared to the conventional drugs. The aim of this review is to present recent data on natural bioactive compounds with anti-inflammatory properties and efficacy in the treatment of OA, their formulation in lipid nanostructured carriers, mainly liposomes, as controlled release systems and the possibility to be intra-articularly (IA) administered. The literature regarding glycosaminoglycans, proteins, polyphenols and their ability to modify the cell response and mechanisms of action in different models of inflammation are reviewed. The advantages and limits of using lipid nanoformulations as drug delivery systems in OA treatment and the suitable route of administration are also discussed. Liposomes containing glycosaminoglycans presented good biocompatibility, lack of immune system activation, targeted delivery of bioactive compounds to the site of action, protection and efficiency of the encapsulated material, and prolonged duration of action, being highly recommended as controlled delivery systems in OA therapy through IA administration. Lipid nanoformulations of polyphenols were tested both in vivo and in vitro models that mimic OA conditions after IA or other routes of administration, recommending their clinical application.

Ultrahigh nanostructured drug payloads from degradable mesoporous silicon aerocrystals

Porous silicon has found increased attention as a drug delivery system due to its unique features such as high drug payloads, surface area and biodegradation. In this study supercritical fluid (SCF) assisted drying of ultrahigh porosity (>90%) silicon particles and flakes was shown to result in much higher mesopore volumes (~4.66 cm³/g) and surface areas (~680 m²/g) than with air-drying. The loading and physical state of the model drug (S)-(+)-Ibuprofen in SCF dried matrices was quantified and assessed using thermogravimetric analysis, differential scanning calorimetry, UV-Vis spectrophotometry, gravimetric analysis, gas adsorption and electron microscopy. Internal drug payloads of up to 72% were achieved which was substantially higher than values published for both conventionally dried porous silicon (17-51%) and other mesoporous materials (7-45%). In-vitro degradability kinetics of SCF-dried matrices in simulated media was also found to be faster than air-dried controls. The in-vitro release studies provided improved but sustained drug dissolution at both pH 2.0 and pH 7.4.

Functionalized Particles Designed for Targeted Delivery

Pure bioactive compounds alone can only be exceptionally administered in medical treatment. Usually, drugs are produced as various forms of active compounds and auxiliary substances, combinations assuring the desired healing functions. One of the important drug forms is represented by a combination of active substances and particle-shaped polymer in the nano- or micrometer size range. The review describes recent progress in this field balanced with basic information. After a brief introduction, the paper presents a concise overview of polymers used as components of nano- and microparticle drug carriers. Thereafter, progress in direct synthesis of polymer particles with functional groups is discussed. A section is devoted to formation of particles by self-assembly of homo- and copolymer-bearing functional groups. Special attention is focused on modification of the primary functional groups introduced during particle preparation, including introduction of ligands promoting anchorage of particles onto the chosen living cell types by interactions with specific receptors present in cell membranes. Particular attention is focused on progress in methods suitable for preparation of particles loaded with bioactive substances. The review ends with a brief discussion of the still not answered questions and unsolved problems.

Drug Carriers: Classification, Administration, Release Profiles, and Industrial Approach

This work is aimed at providing a description of the complex world of drug carriers, starting from the description of this particular market in terms of revenue. Then, a brief overview of several types of conventional and innovative drug carrier systems has been included. The types of administration routes were also analyzed, with a critical and qualitative comment on drug release kinetics and drug profile shapes. Carriers were classified according to their ability to provide a prolonged and targeted release. The concept of the therapeutic window has been presented, providing advantages of having pulsed drug release to avoid side effects to target tissues. A critical comment on the use of conventional and innovative techniques for the production of drug carriers by large industrial companies has been proposed. As a final attempt for this work, an overall unique schematization of a drug carrier production process has been added, highlighting the necessity to create a strong double link among world-requested versatility of drug carriers for human applications and the newly developed industrial processes.

Liposomes for oral delivery of protein and peptide-based therapeutics: challenges, formulation strategies, and advances

Throughout the past decade, there has been a rapid growth in the development of protein/peptide-based therapeutics. These therapeutics have found widespread applications in the treatment of cancer, infectious diseases, and other metabolic disorders owing to their several desirable attributes, such as reduced toxicity, diverse biological activities, high specificity, and potency. Most protein/peptide-based drugs are still administered parenterally, and there is an unprecedented demand in the pharmaceutical industry to develop oral delivery routes to increase patient acceptability and convenience. Recent advancements in nanomedicine discoveries have led to the development of several nano and micro-particle-based oral delivery platforms for protein/peptide-based therapeutics and among these, liposomes have emerged as a prominent candidate. Liposomes are spherical vesicles composed of one or more phospholipid bilayers enclosing a core aqueous phase. Their unique amphiphilic nature enables encapsulation of a diverse range of bioactives/drugs including both hydrophobic and hydrophilic compounds for delivery. Against this backdrop, this review provides an overview of the current approaches and challenges associated with the routes and methods of oral administration of protein/peptide-based therapeutics by using liposomes as a potential vehicle. First, the conventional and innovative liposome formation approaches have been discussed along with their applications. Next, the challenges associated with current approaches for oral delivery of protein and peptide-derived therapeutics have been thoroughly addressed. Lastly, we have critically reviewed the potential of liposomes utilization as vehicles for oral delivery of proteins emphasizing the current status and future directions in this area.

Insight Into Nanoliposomes as Smart Nanocarriers for Greening the Twenty-First Century Biomedical Settings

The necessity to develop more efficient, biocompatible, patient compliance, and safer treatments in biomedical settings is receiving special attention using nanotechnology as a potential platform to design new drug delivery systems (DDS). Despite the broad range of nanocarrier systems in drug delivery, lack of biocompatibility, poor penetration, low entrapment efficiency, and toxicity are significant challenges that remain to address. Such practices are even more demanding when bioactive agents are intended to be loaded on a nanocarrier system, especially for topical treatment purposes. For the aforesaid reasons, the search for more efficient nano-vesicular systems, such as nanoliposomes, with a high biocompatibility index and controlled releases has increased considerably in the past few decades. Owing to the stratum corneum layer barrier of the skin, the in-practice conventional/conformist drug delivery methods are inefficient, and the effect of the administered therapeutic cues is limited. The current advancement at the nanoscale has transformed the drug delivery sector. Nanoliposomes, as robust nanocarriers, are becoming popular for biomedical applications because of safety, patient compliance, and quick action. Herein, we reviewed state-of-the-art nanoliposomes as a smart and sophisticated drug delivery approach. Following a brief introduction, the drug delivery mechanism of nanoliposomes is discussed with suitable examples for the treatment of numerous diseases with a brief emphasis on fungal infections. The latter half of the work is focused on the applied perspective and clinical translation of nanoliposomes. Furthermore, a detailed overview of clinical applications and future perspectives has been included in this review.

Economic Analysis of a New Business for Liposome Manufacturing Using a High-Pressure System

Supercritical assisted Liposome formation (SuperLip) is a lab-scale process for the production of liposomes. SuperLip was recognized as being a versatile supercritical assisted technique for the encapsulation of molecules for different industrial applications, such as pharmaceutic, cosmetic, textile, and nutraceutic purposes. The aim of this work was to perform an economic analysis to assess the profitability of the SuperLip process. The liposomes market was analyzed and the SuperLip process was compared to other techniques in terms of manufacturing advantages using the Canvas and Strengths, Weaknesses, Opportunities, and Treats (S.W.O.T.) models. SuperLip Plant Capital Expenditures (CAPEX) were estimated, and plant Operating Expenditures (OPEX) were also evaluated and integrated with personnel cost and other plant goods and services. A profit and loss statement was generated, together with a cash flow analysis. According to the market average selling price, liposome price is 1.8 €/mL; in order to join the market rapidly, the selling price of liposomes produced using SuperLip was set at 1.1 €/mL. A payback time has been identified at the fourth year of business. Economic indexes such as ROI and ROS were calculated on a 10-year business prospect, obtaining about a 230% return on investment and a 26.7% return on sales.

Liposomes: From Bangham to Supercritical Fluids

Liposomes are spherical vesicles made up of an aqueous core surrounded by phospholipids. These delivery systems (DS) are largely employed as drug carriers in several industrial fields, such as pharmaceutical and nutraceutical fields. The aim of this short review is to provide a fast overview on the main fundamentals of liposomes, thought as a compact guide for researchers and students that want to approach this topic for the first time. The mini-review will focus on the definitions, production methods and characterization protocols of the liposomes produced, making a critical comparison of the main conventional and supercritical based manufacturing methods available. The literature was analyzed deeply from the first works by Dr. Bangham in 1965 to the most recent supercritical fluid applications. The advantages and disadvantages of conventional and high-pressure processes will be described in terms of solvent elimination, production at the nanometric (50–300 nm) and micrometric level (1–100 μm) and encapsulation efficiency (20–90%). The first proposed methods were characterized by a low encapsulation efficiency (20–40%), resulting in drug loss, a high solvent residue and high operating cost. The repeatability of conventional processes was also low, due to the prevalent batch mode. Supercritical-assisted methods were developed in semi-continuous layouts, resulting in an easy process scale-up, better control of liposome dimensions (polydispersity index, PDI) and also higher encapsulation efficiencies (up to 90%).

Liposomes for Intra-Articular Analgesic Drug Delivery in Orthopedics: State-of-Art and Future Perspectives. Insights from a Systematic Mini-Review of the Literature

Background and objectives: Liposomal structures are artificial vesicles composed of one or several lamellae of phospholipids which surround an inner aqueous core. Given the amphoteric nature of phospholipids, liposomes are promising systems for drug delivery. The present review provides an updated synthesis of the main techniques for the production of liposomes for orthopedic applications, focusing on the drawbacks of the conventional methods and on the advantages of high pressure techniques. Materials and Methods: Articles published in any language were systematically retrieved from two major electronic scholarly databases (PubMed/MEDLINE and Scopus) up to March 2020. Nine articles were retained based on the “Preferred Reporting Items for Systematic Reviews and Meta-Analyses” (PRISMA) guidelines. Results: Liposome vesicles decrease the rate of inflammatory reactions after local injections, and significantly enhance the clinical effectiveness of anti-inflammatory agents providing controlled drug release, reducing toxic side effects. Conclusions: This review presents an update on the improvement in musculoskeletal ailments using liposome treatment.

Supercritical Fluid Applications in the Design of Novel Antimicrobial Materials

Bacterial resistance to antibiotics is one of the biggest problems in the modern world. The prevention of bacterial spreading from hospitals to the community and vice versa is an issue we have to deal with. This review presents a vast potential of contemporary high-pressure techniques in the design of materials with antimicrobial activity. Scientists from all over the world came up with ideas on how to exploit extraordinary properties of supercritical fluids in the production of advantageous materials in an environmentally friendly way. The review summarizes reported methods and results.