Oxygen vacancy self-doped black TiO2 nanotube arrays by aluminothermic reduction for photocatalytic CO2 reduction under visible light illumination

Black titanium oxide: synthesis, modification, characterization, physiochemical properties, and emerging applications for energy conversion and storage, and environmental sustainability

Since its advent in 2011, black titanium oxide (B-TiOx) has garnered significant attention due to its exceptional optical characteristics, notably its enhanced absorption spectrum ranging from 200 to 2000 nm, in stark contrast to its unmodified counterpart. The escalating urgency to address global climate change has spurred intensified research into this material for sustainable hydrogen production through thermal, photocatalytic, electrocatalytic, or hybrid water-splitting techniques. The rapid advancements in this dynamic field necessitate a comprehensive update. In this review, we endeavor to provide a detailed examination and forward-looking insights into the captivating attributes, synthesis methods, modifications, and characterizations of B-TiOx, as well as a nuanced understanding of its physicochemical properties. We place particular emphasis on the potential integration of B-TiOx into solar and electrochemical energy systems, highlighting its applications in green hydrogen generation, CO2 reduction, and supercapacitor technology, among others. Recent breakthroughs in the structure-property relationship of B-TiOx and its applications, grounded in both theoretical and empirical studies, are underscored. Additionally, we will address the challenges of scaling up B-TiOx production, its long-term stability, and economic viability to align with ambitious future objectives.

Fe-TiO2-x/TiO2 S-scheme homojunction for efficient photocatalytic CO2 reduction

CO2-to-high value-added chemicals via a photocatalytic route is of interest but strangled by the low efficiency. Herein, a novel Fe-TiO2-x/TiO2 S-scheme homojunction was designed and constructed by using a facile surface modification approach whereby oxygen vacancy (OV) and Fe introducing on the TiO2 nanorod surface. The as-synthesized Fe-TiO2-x/TiO2 S-scheme homojunction exhibits positive properties on promoting photocatalytic CO2 reduction: i) the nanorod structure provides numerous active sites and a radical charge transfer path; ii) the doped Fe and OV not only synergistically enhance light utilization but also promote CO2 adsorption; iii) the Fe-TiO2-x/TiO2 S-scheme homojunction benefits photoexcited charge separation and retains stronger redox capacity. Thanks to those good characters, the Fe-TiO2-x/TiO2 homojunction exhibits superior CO2 reduction performances with optimized CO/CH4 generation rates of 122/22 μmol g-1h-1 which exceed those of pure TiO2 by more than 9.4/7.3 folds and most currently reported catalytic systems. This manuscript develops a facile and universal approach to synthesize well-defined homojunction and may inspire the construction of other more high-efficiency photocatalysts toward CO2 reduction and beyond.

Enhancing photocatalytic CO2 reduction with TiO2-based materials: Strategies, mechanisms, challenges, and perspectives

The concentration of atmospheric CO2 has exceeded 400 ppm, surpassing its natural variability and raising concerns about uncontrollable shifts in the carbon cycle, leading to significant climate and environmental impacts. A promising method to balance carbon levels and mitigate atmospheric CO2 rise is through photocatalytic CO2 reduction. Titanium dioxide (TiO2), renowned for its affordability, stability, availability, and eco-friendliness, stands out as an exemplary catalyst in photocatalytic CO2 reduction. Various strategies have been proposed to modify TiO2 for photocatalytic CO2 reduction and improve catalytic activity and product selectivity. However, few studies have systematically summarized these strategies and analyzed their advantages, disadvantages, and current progress. Here, we comprehensively review recent advancements in TiO2 engineering, focusing on crystal engineering, interface design, and reactive site construction to enhance photocatalytic efficiency and product selectivity. We discuss how modifications in TiO2's optical characteristics, carrier migration, and active site design have led to varied and selective CO2 reduction products. These enhancements are thoroughly analyzed through experimental data and theoretical calculations. Additionally, we identify current challenges and suggest future research directions, emphasizing the role of TiO2-based materials in understanding photocatalytic CO2 reduction mechanisms and in designing effective catalysts. This review is expected to contribute to the global pursuit of carbon neutrality by providing foundational insights into the mechanisms of photocatalytic CO2 reduction with TiO2-based materials and guiding the development of efficient photocatalysts.

Advances in Defect Engineering of Metal Oxides for Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction technology, capable of converting low-density solar energy into high-density chemical energy, stands as a promising approach to alleviate the energy crisis and achieve carbon neutrality. Semiconductor metal oxides, characterized by their abundant reserves, good stability, and easily tunable structures, have found extensive applications in the field of photocatalysis. However, the wide bandgap inherent in metal oxides contributes to their poor efficiency in photocatalytic CO2 reduction. Defect engineering presents an effective strategy to address these challenges. This paper reviews the research progress in defect engineering to enhance the photocatalytic CO2 reduction performance of metal oxides, summarizing defect classifications, preparation methods, and characterization techniques. The focus is on defect engineering, represented by vacancies and doping, for improving the performance of metal oxide photocatalysts. This includes advancements in expanding the photoresponse range, enhancing photogenerated charge separation, and promoting CO2 molecule activation. Finally, the paper provides a summary of the current issues and challenges faced by defect engineering, along with a prospective outlook on the future development of photocatalytic CO2 reduction technology.

Photoactivity of amorphous and crystalline TiO2 nanotube arrays (TNA) films in gas phase CO2 reduction to methane with simultaneous H2 production

This study assessed the photoactivity of amorphous and crystalline TiO2 nanotube arrays (TNA) films in gas phase CO2 reduction. The TNA photocatalysts were fabricated by titanium anodization and submitted to an annealing treatment for crystallization and/or cathodic reduction to introduce Ti3+ and oxygen vacancies into the TiO2 structure. The cathodic reduction demonstrated a significant effect on the generated photocurrent. The photoactivity of the four TNA catalysts in CO2 reduction with water vapor was evaluated under UV irradiation for 3 h, where CH4 and H2 were detected as products. The annealed sample exhibited the best performance towards methane with a production rate of 78 μmol gcat-1 h-1, followed by the amorphous film, which also exhibited an impressive formation rate of 64 μmol gcat-1 h-1. The amorphous and reduced-amorphous films exhibited outstanding photoactivity regarding H2 production (142 and 144 μmol gcat-1 h-1, respectively). The annealed catalyst also revealed a good performance for H2 production (132 μmol gcat-1 h-1) and high stability up to five reaction cycles. Molecular dynamic simulations demonstrated the changes in the band structure by introducing oxygen vacancies. The topics covered in this study contribute to the Sustainable Development Goals (SDG), involving affordable and clean energy (SDG#7) and industry, innovation, and infrastructure (SDG#9).

Photoelectrochemical-driven nitrogen reduction to ammonia by a Vo-SnO2/TiO2 composite electrode

N2 molecules with the NN triple bond structure are difficult to cleave under mild conditions to achieve the nitrogen fixation reaction. Photoelectrochemical (PEC) catalysis technology combining the advantages of photocatalysis and electrocatalysis provides the possibility of the nitrogen reduction reaction under ambient conditions. Herein, an SnO2/TiO2 photoelectrode was first fabricated through depositing SnO2 quantum dots on TiO2 nanorod arrays via a simple hydrothermal method. The oxygen vacancy (Vo) content was then induced in SnO2 through annealing SnO2/TiO2 at high temperature under an inert atmosphere. The heterogeneous structure of Vo-SnO2 quantum dots and TiO2 nanorods boosted the separation of photocarriers. The photoelectrons generated by photoexcitation were transferred from the conduction band of TiO2 to the conduction band of Vo-SnO2 and trapped by Vo. Vo activates N2 molecules adsorbed on the catalyst surface, and reacts with H+ in the electrolyte to generate NH3. The nitrogen fixation yield of PEC catalysis and its faradaic efficiency can reach 19.41 μg cm-2 h-1, and 59.6% at -0.2 V bias potential, respectively. The heterogeneous structure of Vo-SnO2/TiO2, introduction of Vo and synergistic effect between light and electricity greatly promotes the PEC nitrogen reduction to NH3.

The Underlying Catalytic Role of Oxygen Vacancies in Fatty Acid Methyl Esters Ketonization over TiOx Catalysts

Recently, interest in converting bio-derived fatty acid methyl esters (FAMEs) into added-value products has significantly increased. The selectivity of ketonization reaction in the conversion of the FAMEs has significantly hampered the efficiency of this process. Herein, this work reports the preparation of catalysts with different levels of oxygen vacancies while the crystal phase remained unchanged. The catalyst with the highest level of oxygen vacancy exhibited the maximum selectivity. The density functional theory (DFT) simulation showed an increase in interatomic distances leading to the formation of frustrated Lewis pairs (FLPs) upon the creation of oxygen vacancies. The surface measurements, type and density of acid sites of the catalysts, showed that the Lewis acid sites enhanced the selectivity for ketone production; while Bronsted acid sites increased the formation of by-products. Moreover, the ketone formation rate was directly proportional to acid density. The findings of this research provide a different approach for catalyst design, based on defects engineering and their effect on the surface activity, which could be used for enhancing the catalytic performance of novel metal oxides.

Crystallinity swayed phase transformation and oxygen vacancy formation in TiO2 aerogel photocatalysts

The lack of crystallinity of the aerogel materials has limited their significance which otherwise have found huge potential in wide variety of applications. In current work, we have developed TiO2 aerogels by solid-state gelation method using commercially available P25 and ST-01 (commercial Ishihara TiO2 Powder). The lack of crystallinity in the aerogel framework was resolved via utilizing crystalline TiO2 nanoparticles and the phase transformation was assessed as a function of phase composition. Via controlled solid-state gelation, surface area retention of 88.7% was achieved whereas the rutile-to-anatase weight fraction (WR) was considerably enhanced to 0.50. Interestingly, the phase transformation occurred only in P25, which suggests the mixed phase (anatase + rutile) composition as prerequisite for successful phase transformation. Favorably, TiO2 aerogels imbibe high degree of oxygen vacancies (Vo) responsible for photocatalytic applications. Interestingly, Vo induction is higher for the TiO2 with anatase phase composition (ST-01) followed by the sample with mixed phase composition (P25). The developed TiO2 aerogel photocatalysts were employed to dye degradation of Rhodamine B (RhB) and Methylene Blue (MB). The samples attained 94.8% and 96.8% degradation efficiency within 15 min for RhB and MB with nearly 2-fold improvement in the photocatalytic efficiency compared to parent P25 TiO2 respectively.

Recent Advances in Black TiO2 Nanomaterials for Solar Energy Conversion

Titanium dioxide (TiO₂) nanomaterials have been widely used in photocatalytic energy conversion and environmental remediation due to their advantages of low cost, chemical stability, and relatively high photo-activity. However, applications of TiO₂ have been restricted in the ultraviolet range because of the wide band gap. Broadening the light absorption of TiO₂ nanomaterials is an efficient way to improve the photocatalytic activity. Thus, black TiO₂ with extended light response range in the visible light and even near infrared light has been extensively exploited as efficient photocatalysts in the last decade. This review represents an attempt to conclude the recent developments in black TiO₂ nanomaterials synthesized by modified treatment, which presented different structure, morphological features, reduced band gap, and enhanced solar energy harvesting efficiency. Special emphasis has been given to the newly developed synthetic methods, porous black TiO₂, and the approaches for further improving the photocatalytic activity of black TiO₂. Various black TiO₂, doped black TiO₂, metal-loaded black TiO₂ and black TiO₂ heterojunction photocatalysts, and their photocatalytic applications and mechanisms in the field of energy and environment are summarized in this review, to provide useful insights and new ideas in the related field.

Tube length optimization of titania nanotube array for efficient photoelectrochemical water splitting

Anodic TiO₂ nanotube arrays (TNTAs) have attracted much attention due to their excellent photoelectrochemical (PEC) properties. In this work, the tube length of TNTAs was optimized for efficient PEC water splitting under two different conditions, in which very few or a massive amount of gas bubbles were generated on the electrodes. As a result, relatively longer TNTAs were found to be preferable for higher PEC performance when a larger number of bubbles were generated. This suggests that the mass transport in the electrolyte is assisted by the generated bubbles, so that the electrode surfaces are more easily exposed to the fresh electrolyte, leading to the higher PEC performance.

Single-step fabrication of highly stable amorphous TiO2 nanotubes arrays (am-TNTA) for stimulating gas-phase photoreduction of CO2 to methane

This study investigates the facile fabrication of interfacial defects assisted amorphous TiO₂ nanotubes arrays (am-TNTA) for promoting gas-phase CO₂ photoreduction to methane. The am-TNTA catalyst was fabricated via a one-step synthesis, without heat treatment, by anodization of Titanium in Ethylene glycol-based electrolyte in a shorter anodizing time. The samples presented a TiO₂ nanostructured array with a nanotubular diameter of 100 ± 10 nm, a wall thickness of 26 ± 5 nm, and length of 3.7 ± 0.3 μm, resulting in a specific surface of 0.75 m² g. The am-TNTA presented prolonged chemical stability, a high exposed surface area, and a large number of surface traps that can reduce the recombination of the charge carriers. The am-TNTA showed promising photoactivity when tested in the CO₂ reduction reaction with water under UV irradiation with a methane production rate of 14.0 μmol g_cat^-1 h^-1 for a pure TiO₂ material without any modification procedure. This enhanced photocatalytic activity can be explained in terms of surface defects of the amorphous structure, mainly OH groups that can act as electron traps for increasing the electron lifetime. The CO₂ interacts directly with those traps, forming carbonate species, which favors the catalytic conversion to methane. The am-TNTA also exhibited a high stability during six reaction cycles. The photocatalytic activity, the significantly reduced time for synthesis, and high stability for continuous CH₄ production make this nanomaterial a potential candidate for a sustainable CO₂ reduction process and can be employed for other energy applications.

Pivotal Role of Holes in Photocatalytic CO2 Reduction on TiO2

Evidence is provided that in a gas-solid photocatalytic reaction the removal of photogenerated holes from a titania (TiO₂ ) photocatalyst is always detrimental for photocatalytic CO₂ reduction. The coupling of the reaction to a sacrificial oxidation reaction hinders or entirely prohibits the formation of CH₄ as a reduction product. This agrees with earlier work in which the detrimental effect of oxygen-evolving cocatalysts was demonstrated. Photocatalytic alcohol oxidation or even overall water splitting proceeds in these reaction systems, but carbon-containing products from CO₂ reduction are no longer observed. H₂ addition is also detrimental, either because it scavenges holes or because it is not an efficient proton donor on TiO₂ . The results are discussed in light of previously suggested reaction mechanisms for photocatalytic CO₂ reduction. The formation of CH₄ from CO₂ is likely not a linear sequence of reduction steps but includes oxidative elementary steps. Furthermore, new hypotheses on the origin of the required protons are suggested.

A 3D C@TiO2 multishell nanoframe for simultaneous photothermal catalytic hydrogen generation and organic pollutant degradation

Rapid heat loss and fast charge carrier recombination constitute two crucial issues that hinder the development of efficient solar energy utilization and conversion over the semiconductor in a photothermal catalytic system. Inspired by energy production from waste water, we designed an advanced 3D C@TiO₂ multishell nanoframe (MNF) photocatalyst. Its unique structural features of heat confinement and vibrant photocarrier kinetics lead to excellent photo-thermal conversion for synchronous superior photocatalytic H₂ evolution (503 μmol g^-1h^-1) and 98.2% RhB removal without the use of any co-catalyst and sacrificial reagent under simulated sunlight irradiation (AM 1.5G). Mechanism exploration reveals that the difference between the inner and outer gas pressure formed inside C@TiO₂ precursor facilitates the selective cleavage of outer TiO₂ layers at selected temperatures during calcination. Synergistic effects between residual carbon core and multi-shelled TiO₂ framework endow C@TiO₂ MNF with excellent heat confinement and vibrant photocarrier kinetics. Such MNF photo-thermocatalyst concept provides a novel strategy for effective utilization of solar energy, and this work may open a novel avenue towards advanced nanostructures for efficient waste-to-energy conversion.

Galvanic Deposition of Pt Nanoparticles on Black TiO2 Nanotubes for Hydrogen Evolving Cathodes

A galvanic deposition method for the in-situ formation of Pt nanoparticles (NPs) on top and inner surfaces of high-aspect-ratio black TiO2 -nanotube electrodes (bTNTs) for true utilization of their total surface area has been developed. Density functional theory calculations indicated that the deposition of Pt NPs was favored on bTNTs with a preferred [004] orientation and a deposition mechanism occurring via oxygen vacancies, where electrons were localized. High-resolution transmission electron microscopy images revealed a graded deposition of Pt NPs with an average diameter of around 2.5 nm along the complete nanotube axis (length/pore diameter of 130 : 1). Hydrogen evolution reaction (HER) studies in acidic electrolytes showed comparable results to bulk Pt (per geometric area) and Pt/C commercial catalysts (per mg of Pt). The presented novel HER cathodes of minimal engineering and low noble metal loadings (μg cm-2 range) achieved low Tafel slopes (30-34 mV dec-1 ) and high stability in acidic conditions. This study provides important insights for the in-situ formation and deposition of NPs in high-aspect-ratio structures for energy applications.

Enhanced light-driven CO2 reduction on metal-free rich terminal oxygen-defects carbon nitride nanosheets

Exploiting highly-efficient and metal-free photocatalyst for CO₂ conversion into useful chemicals is a promising pathway to solve the energy and environmental crises. In this work, through a facile exfoliation process, an ultra-thin and short-range order g-C₃N₄ nanosheet with rich terminal oxygen defects is successfully constructed, which presents total electron yield of 36.30 μmol g^-1h^-1, 3.05 times higher than that of bulk one. The results affirms that both the van der Waals forces between the C₃N₄ layers and the CN bonds on the periodic heptazine units could be disrupted during the sonication process, thus achieving the ultra-thin and ultra-small g-C₃N₄ nanosheet, which enables the improvement of optical absorption and carrier separation abilities. The π-conjugated triazine rings structure is still remained but the terminal active C radicals tend to transform into oxygen defects which become the sites to bind and activate CO₂. The in-situ DRIFTS provides the direct evidence that the size regulation and oxygen-defects design strategy can effectively promote the CO₂ adsorption and activation process upon the photocatalyst, thus turning out to boost the reactivity toward CO₂.

Black titania an emerging photocatalyst: review highlighting the synthesis techniques and photocatalytic activity for hydrogen generation

The TiO₂ semiconductor photocatalyst is in the limelight of sustainable energy research in recent years because of its beneficial properties. However, its wide band-gap and rapid exciton recombination rate makes it a lame horse, and reduces its photocatalytic efficiency. Recently, researchers have developed facile methods for lowering the band-gap, so that it captures a wide range of solar spectrum, but the efficiency is still way behind the target value. After the discovery of black titania (B-TiO₂), the associated drawbacks of white TiO₂ and its modified forms were addressed to a large extent because it not only absorbs photons in a broad spectral range (UV to IR region), but also modifies the structural and morphological features, along with the electronic properties of the material, significantly boosting the catalytic performance. Hence, B-TiO₂ effectively converts solar energy into renewable chemical energy i.e. green fuel H₂ that can ultimately satisfy the energy crisis and environmental pollution. However, the synthesis techniques involved are quite tedious and challenging. Hence, this review summarizes various preparation methods of B-TiO₂ and the involved characterization techniques. It also discusses the different modification strategies adopted to improve the H₂ evolution activity, and hopes that this review acts as a guiding tool for researchers working in this field.

Converting Organic Wastewater into CO Using MOFs-Derived Co/In2O3 Double-Shell Photocatalyst

The photocatalytic conversion of organic wastewater into value-added chemicals is a promising strategy to solve the environmental issue and energy crisis. Herein, Co/In₂O₃ nanotubes with a double-shell structure, as a highly efficient photocatalyst, are synthesized by a one-step calcination method. The Co/In₂O₃ heterostructure shows an outstanding photocatalytic CO₂ reduction performance of 4902 μmol h^-1 g^-1. Notably, these Co/In₂O₃ photocatalysts also achieve CO₂ self-generation and in situ reduction conversion in acid organic wastewater (phenol solution), in which the high CO₂ (47.5 μmol h^-1 g^-1) and CO (0.9 μmol h^-1 g^-1) evolution rates are demonstrated under solar irradiation. Transient photovoltage (TPV) tests demonstrate that Co nanoparticles on Co/In₂O₃ double-shell heterostructure serve as the CO₂ reduction sites for the effective capture and stabilization of the photogenerated electrons.

Self-Doping Surface Oxygen Vacancy-Induced Lattice Strains for Enhancing Visible Light-Driven Photocatalytic H2 Evolution over Black TiO2

The synergistic effect of surface oxygen vacancy with induced lattice strains on visible light-driven photocatalytic H₂ evolution over black TiO₂ was investigated. Experimental measurements and theoretical calculations on the lattice parameters of black TiO₂ show that surface oxygen vacancies induce internal lattice strain during two-step aluminothermic reduction, which regulates the band structure and optimizes the photoinduced charge behavior of black TiO₂. The hydrogen evolution rate of black TiO₂ with strain modification shows a 12-fold increase to 1.882 mmol/g· h (equal to 4.705 μmol/cm²·h) under visible light illumination. The metastable state caused by the surface oxygen vacancies leads to the formation of a high-energy surface, which enhances visible light absorption and improves the photoinduced charge separation efficiency. Furthermore, the internal lattice strain provides the driving force and channel for the directional movement of photoinduced electrons from the bulk to the high-energy surface for photocatalytic H₂ evolution. This strategy provides a new method for designing a high-performance photocatalyst for H₂ production.

Pd nanocrystal sensitization two-dimension porous TiO2 for instantaneous and high efficient H2 detection

Hydrogen (H₂) molecules are easy to leak during production, storage, transportation and usage. Because of their flammability and explosive nature, quick and reliable dectection of H₂ molecule is of great significance. Herein, an excellent H₂ gas sensor has been realized based on Pd nanocrystal sensitized two-dimensional (2D) porous TiO₂ (Pd/TiO₂). The formation of 2D porous TiO₂ with the removal of graphene oxide template has been monitored by an in-situ transmission electron microscope. It is found that the size of the GO template can be almost completely replicated by 2D TiO₂. The Pd/TiO₂ sensor exhibited an instantaneous response and a satisfactory low detection limit for H₂ detection. These excellent gas-sensing performances (good selectivity, unique linearity response and high stability) can be attributed to the unique 2D porous structure and the synergistic effect between oxidized Pd and TiO₂, including the unique adsorption properties of O₂ or/and H₂ on Pd/TiO₂, the reaction between PdO and H₂ gas, and the regulated depletion layer arising from p-type PdO to n-type TiO₂. This work demonstrates a rational design and synthesis of highly efficient H₂ sensitive materials for energy and manufacturing security.

Low-Dimensional Nanostructured Photocatalysts for Efficient CO2 Conversion into Solar Fuels

The ongoing energy crisis and global warming caused by the massive usage of fossil fuels and emission of CO2 into atmosphere continue to motivate researchers to investigate possible solutions. The conversion of CO2 into value-added solar fuels by photocatalysts has been suggested as an intriguing solution to simultaneously mitigate global warming and provide a source of energy in an environmentally friendly manner. There has been considerable effort for nearly four decades investigating the performance of CO2 conversion by photocatalysts, much of which has focused on structure or materials modification. In particular, the application of low-dimensional structures for photocatalysts is a promising pathway. Depending on the materials and fabrication methods, low-dimensional nanomaterials can be formed in zero dimensional structures such as quantum dots, one-dimensional structures such as nanowires, nanotubes, nanobelts, and nanorods, and two-dimensional structures such as nanosheets and thin films. These nanostructures increase the effective surface area and possess unique electrical and optical properties, including the quantum confinement effect in semiconductors or the localized surface plasmon resonance effect in noble metals at the nanoscale. These unique properties can play a vital role in enhancing the performance of photocatalytic CO2 conversion into solar fuels by engineering the nanostructures. In this review, we provide an overview of photocatalytic CO2 conversion and especially focus on nanostructured photocatalysts. The fundamental mechanism of photocatalytic CO2 conversion is discussed and recent progresses of low-dimensional photocatalysts for efficient conversion of CO2 into solar fuels are presented.

Defective TiO2 for photocatalytic CO2 conversion to fuels and chemicals

Photocatalytic conversion of CO2 into fuels and valuable chemicals using solar energy is a promising technology to combat climate change and meet the growing energy demand. Extensive effort is going on for the development of a photocatalyst with desirable optical, surface and electronic properties. This review article discusses recent development in the field of photocatalytic CO2 conversion using defective TiO2. It specifically focuses on the different synthesis methodologies adapted to generate the defects and their impact on the chemical, optical and surface properties of TiO2 and, thus, photocatalytic CO2 conversion. It also encompasses theoretical investigations performed to understand the role of defects in adsorption and activation of CO2 and identify the mechanistic pathway which governs the formation and selectivity of different products. It is divided into three parts: (i) general mechanism and thermodynamic criteria for defective TiO2 catalyzed CO2 conversion, (ii) theoretical investigation on the role of defects in the CO2 adsorption-activation and mechanism responsible for the formation and selectivity of different products, and (iii) the effect of variation of physicochemical properties of defective TiO2 synthesized using different methods on the photocatalytic conversion of CO2. The review also discusses the limitations and the challenges of defective TiO2 photocatalysts that need to be overcome for the production of sustainable fuel utilizing solar energy.

Highly Ordered TiO2 Nanotube Arrays with Engineered Electrochemical Energy Storage Performances

Nanoscale engineering of regular structured materials is immensely demanded in various scientific areas. In this work, vertically oriented TiO₂ nanotube arrays were grown by self-organizing electrochemical anodization. The effects of different fluoride ion concentrations (0.2 and 0.5 wt% NH₄F) and different anodization times (2, 5, 10 and 20 h) on the morphology of nanotubes were systematically studied in an organic electrolyte (glycol). The growth mechanisms of amorphous and anatase TiO₂ nanotubes were also studied. Under optimized conditions, we obtained TiO₂ nanotubes with tube diameters of 70–160 nm and tube lengths of 6.5–45 μm. Serving as free-standing and binder-free electrodes, the kinetic, capacity, and stability performances of TiO₂ nanotubes were tested as lithium-ion battery anodes. This work provides a facile strategy for constructing self-organized materials with optimized functionalities for applications.

A novel ternary MQDs/NCDs/TiO2 nanocomposite that collaborates with activated persulfate for efficient RhB degradation under visible light irradiation

TiO₂ nanosheets modified with dual MQDs/NCD quantum dots not only promote light absorption capacity and electron–hole transport but also collaborate well with activated persulfate for pollutant degradation.

Photocatalytic CO2 reduction to CH4 on iron porphyrin supported on atomically thin defective titanium dioxide

The synergistic effect of OVs and FeTPP on 2D TiO2 improves the efficiency and selectivity of CO2 photoreduction to CH4.

Black TiO2 Synthesis by Chemical Reduction Methods for Photocatalysis Applications

Applications of TiO2 nanomaterials in photocatalysis, batteries, supercapacitors and solar cells, have seen widespread development in recent decades. Nowadays, black TiO2 have won attention due to enhancing the solar light absorption by the formation of oxygen vacancies and Ti3+ defects, to promote the separation of photo-generated charge carriers leading to the improvement of the photocatalytic performance in H2 production and pollutants degradation. The enhanced photocatalytic activity of black TiO2 is also due to a lattice disorder on the surface and the presence of oxygen vacancies, Ti3+ ions, Ti-OH and Ti-H groups. Enhancing the optical absorption characteristics of TiO2 and change of energy level and band-gap of materials have been successfully demonstrated to improve their photocatalytic activities, especially for black TiO2 nanoparticles, which promote visible light absorption. The current review focuses on the investigation of the chemical reduction synthetic route for black TiO2 nanomaterials, and their proposed association with green applications such as photodegradation of organic pollutants and photocatalytic water splitting. The synthesis methods of black TiO2 involves the changes from Ti4+ to Ti3+ state, into different strategies: (1) The use of highly active hydrogen species such as H2, H2/Ar or H2/N2 gases, and metal hydrides (NaBH4, CaH2), (2) the reduction by active metals such as aluminum, magnesium and zinc, and (3) organic molecules such as imidazole and ascorbic acid.