CO2 Assisted Oxidative Dehydrogenation of Propane to Propylene over Fluidizable MoO3/La2O3-γAl2O3 Catalysts

Metallic Catalysts for Oxidative Dehydrogenation of Propane Using CO2

The oxidative dehydrogenation of propane using CO₂ (CO₂ -ODP) is a promising technique for realizing high-yield propylene production and CO₂ usage. Developing a highly efficient catalyst for CO₂ -ODP is essential and beneficial to the chemical industry and for realizing net-zero emissions. Many studies have investigated metal oxide-based catalysts, revealing that rapid deactivation and low selectivity remain limiting factors for their industrial applications. In recent years, metallic nanoparticle catalysts have become increasingly attractive due to their unique properties. Therefore, we summarize the performance of metal-based catalysts in CO₂ -ODP reactions by considering catalyst design concepts, different mechanisms in the reaction process, and the role of CO₂ .

Low-temperature propane oxidative dehydrogenation over UiO-66 supported vanadia catalysts: Role of support confinement effects

Overoxidation is the principal barrier against commercializing propane oxidative dehydrogenation (PODH) catalysts for propylene production. The current approach to reducing overoxidation, i.e., coating the non-selective support surface with a monolayer of active phase, can itself increase the probability of overoxidation of the produced propylene due to polymerization of active phase species. Incorporating the "confinement agents" onto the metal oxide support might be considered as an alternative solution to prevent hydrocarbons from reaching the support and overoxidizing. Herein, the UiO-66 metal-organic framework, which contains numerous organic ligands connected to the zirconia nodes, was used as support for the vanadia active phase to highlight the role of support's confinement effects on the overall catalytic performance toward the PODH. The UiO-66 supported vanadia catalysts with various vanadium loadings were fabricated via an ultrasonic-assisted wet impregnation procedure. The catalytic function is related to the underlying chemical processes at catalyst surfaces using physicochemical characterization techniques, PODH performance measurements, and machine learning tools. The results showed that the catalyst with a relatively low vanadia density of 2.7 nm-2, equivalent to less than half of the entire support surface coverage, could achieve propylene productivity of 4.43 [Formula: see text] , propane conversion of 17.1%, and propylene selectivity of 49.7% at 350 °C.

Increased Light Olefin Production by Sequential Dehydrogenation and Cracking Reactions

In this study, a sequential reaction using selected metal oxides, followed by ZSM-5-based catalysts, was employed to demonstrate a promising route for enhancing light olefin production in the catalytic cracking of naphtha. The rationale for the reaction is based on the induction of alkenes into hydrocarbon feeds prior to cracking. The optimum olefin induction was achieved by carefully optimizing the dehydrogenation active sites Mo/Al2O3 catalyst. The formed alkenes have a lower activation energy for C-H/C-C bond breaking compared to alkanes. This could accelerate the formation of carbenium ions, thus promoting the conversion of n-octane to produce light olefins. Detailed product distribution and DFT calculation indicated a remarkable increase in ethylene and propylene production in the final product through a modified reaction pathway. Compared with the common metal-promoted zeolite catalysts, the new route could avoid the block of zeolite channels and corresponding decreased catalytic cracking activity. The feasibility of the proposed route was confirmed with different ratios of dehydrogenation catalyst to the reactant. The highest yields of ethylene and propylene reached 13.22% and 33.12% with ratios of Mo/Al2O3 and ZSM-5-based catalyst to n-octane both 10:1 at 600 °C. Stability tests showed that the catalytic activity of the double-bed system was stable over 10 cycles.

Research progress of CO2 oxidative dehydrogenation of propane to propylene over Cr-free metal catalysts

CO₂-assisted oxidative dehydrogenation of propane (CO₂-ODHP) is an attractive strategy to offset the demand gap of propylene due to its potentiality of reducing CO₂ emissions, especially under the demands of peaking CO₂ emissions and carbon neutrality. The introduction of CO₂ as a soft oxidant into the reaction not only averts the over-oxidation of products, but also maintains the high oxidation state of the redox-active sites. Furthermore, the presence of CO₂ increases the conversion of propane by coupling the dehydrogenation of propane (DHP) with the reverse water gas reaction (RWGS) and inhibits the coking formation to prolong the lifetime of catalysts via the reverse Boudouard reaction. An effective catalyst should selectively activate the C-H bond but suppress the C-C cleavage. However, to prepare such a catalyst remains challenging. Chromium-based catalysts are always applied in industrial application of DHP; however, their toxic properties are harmful to the environment. In this aspect, exploring environment-friendly and sustainable catalytic systems with Cr-free is an important issue. In this review, we outline the development of the CO₂-ODHP especially in the last ten years, including the structural information, catalytic performances, and mechanisms of chromium-free metal-based catalyst systems, and the role of CO₂ in the reaction. We also present perspectives for future progress in the CO₂-ODHP.

Pore Distortion in a Metal-Organic Framework for Regulated Separation of Propane and Propylene

The development of porous solids for adsorptive separation of propylene and propane remains an important and challenging line of research. State-of-the-art sorbent materials often suffer from the trade-off between adsorption capacity and selectivity. Here, we report the regulated separation of propylene and propane in a metal-organic framework via designed pore distortion. The distorted pore structure of HIAM-301 successfully excludes propane and thus achieved simultaneously high selectivity (>150) and large capacity (∼3.2 mmol/g) of propylene at 298 K and 1 bar. Dynamic breakthrough measurements validated the excellent separation of propane and propylene. In situ neutron powder diffraction and inelastic neutron scattering revealed the binding domains of adsorbed propylene molecules in HIAM-301 as well as host-guest interaction dynamics. This study presents a new benchmark for the adsorptive separation of propylene and propane.

C–H and C–C bond activation of propane to propylene and ethylene selectivity assisted by CO2 over titania catalysts

C–H and C–C bond activation of propane to propylene and ethylene selectivity assisted by CO2 over titania catalysts.