Fabrication of Bi-BiOCl/MgIn2S4 heterostructure with step-scheme mechanism for carbon dioxide photoreduction into methane

CuS/Bi2O3 composites activating PMS under visible light for efficient degradation of antibiotic tetracycline

CuS/Bi2O3 composite photocatalyst was prepared by calcination and in situ precipitation, and peroxymonosulfate (PMS) was applied to the degradation of tetracycline (TC) wastewater under visible light. The microscopic morphology, chemical composition, and optical properties of the composites were investigated by characterization means of XRD, FTIR, SEM, XPS, and UV-Vis DRS. The results showed that the introduction of CuS increased the specific surface area of Bi2O3 and increased the visible absorption boundary of Bi2O3 from 455 to 524 nm, which effectively inhibited the complexation of photogenerated electron-hole pairs. The experimental results showed that the introduction of PMS strengthened the removal of TC from the composites, and 95% of TC could be removed under visible light irradiation, and the reaction rate was 8.22 times higher than that of the unspiked PMS, indicating that the BC-15+vis/PMS catalytic system could degrade the pollutants efficiently. The radical capture experiments showed that several radicals, including ·OH, SO4·-, ·O2-, h+, and 1O2, were present in the catalytic system as the main active species to degrade TC, and the mechanism of photocatalytic activation of PMS by Z-type heterostructures of CuS/Bi2O3 composites was proposed. The present study showed that BC-15 has excellent degradation performance and stability, which provides new ideas for the treatment of antibiotic wastewater.

Dual Z-scheme BiOI/Bi2S3/MgIn2S4 composite photocatalyst for effective photocatalytic degradation of Congo red

The demand and use of dyes in modern life are increasing, and dye pollution has become a widespread concern worldwide; therefore, it is essential to develop novel environmentally friendly materials to deal with dye wastewater. Herein, a novel visible-light-driven ternary catalyst (BiOI/Bi2S3/MgIn2S4) was fabricated by employing the hydrothermal method. Compared to BiOI, the synthesized ternary catalyst exhibited better photocatalytic performance to decompose Congo red under visible light. Congo red was completely degraded after 0.5 h (0.5 g/L photocatalyst BiOI/Bi2S3/MIS-1) in the presence of visible light, which was 16.83 and 9.94 times of that of pure BiOI and MgIn2S4, respectively. A repetitive experiment showed that the BiOI/Bi2S3/MIS-1 could be reusable to degrade Congo red, demonstrating that it has excellent mechanical properties. The enhanced photocatalytic capability was due to addition of BiOI and Bi2S3, which increased the charge separation as well as suppressed the recombination of photo-induced holes and electrons. Electron paramagnetic resonance technique and free radical trapping tests were employed to determine the radicals produced in BiOI/Bi2S3/MgIn2S4 in the presence of visible light, indicating that ·O2- and h+ were major active species to decompose Congo red under photocatalytic process. Seventeen main intermediates or reaction products were identified by UPLC-MS. The tentative degradation pathway of Congo red was also proposed.

Rapid photocatalytic reduction of hexavalent chromium over Z-scheme MgIn2S4/BiPO4 heterojunction: Performance, DFT calculation and mechanism insight

The accumulation of highly fluid and biotoxic hexavalent chromium (Cr(VI)) impairs water ecosystems. It is urgent to quickly reduce Cr (VI) to trivalent chromium (Cr (III)) in wastewater. Hereby, Z-scheme MgIn₂S₄/BiPO₄ heterojunction was prepared, and MB-30 (mass ratio of BiPO₄ to composite) presented a rapid Cr(VI) (10 mg L^-1) removal efficiency of 100% within 10 min, its kinetic rate constant was 9.0 and 30.1 folds that of MgIn₂S₄ and BiPO₄, respectively. After four rounds, MB-30 maintained a high removal rate of 93.18% and stabilized crystal texture. First-principles calculations revealed that the formation of Z-scheme heterojunction could ameliorate charge generation, detachment, migration capability, and light utilization. Meanwhile, the coupling of S and O in the two components produced a tight S-O bond, which acted as an atomic-level access to promote carrier migration. The findings were consistent with the structure superiority and optical and electronic properties of MB-30. The Z-scheme pattern was substantiated based on multifarious experiments, which exhibited an elevated reduction potential while emphasizing the significance of interfacial chemical bond and the internal electric field (IEF) on carrier detachment and migration.

Fabrication and characterization of Z-scheme BiOCl/C/Cu2O heterojunction nanocomposites as efficient catalysts for the photocatalytic reduction of CO2

The photocatalytic reduction of CO₂ to hydrocarbons is expected to simultaneously alleviate the energy crisis and greenhouse effect. Herein, the ternary BiOCl/C/Cu₂O catalysts with different mass ratios were compounded using a simple hydrothermal method, revealing better photocatalytic activity than the monomer. In the absence of sacrificial agents and photosensitizers, 25% BiOCl/C/Cu₂O showed optimal photocatalytic performance. The CO and CH₄ yields over 25% BiOCl/C/Cu₂O reached 26.77 and 9.86 μmol g^-1 h^-1, which is 2.9 and 8.7 times higher than that of the pristine Cu₂O, respectively. The ameliorative activity can be attributed to the construction of the Z-scheme heterostructure and carbon layer, which are conducive to the transfer and separation of photogenerated carriers. This study offers valuable references for the design and investigation of a Z-scheme heterojunction using a carbon layer as an electron transfer medium.

A superior ternary Z-scheme photocatalyst of Bi/Black Phosphorus nanosheets/P-doped BiOCl containing interfacial P-P bond and metallic mediator for H2O2 production and RhB degradation

Photocatalytic performance is significantly influenced by the efficiency of photogenerated electron-hole pairs separation and transfer. In this paper, rational designed Z-scheme Bi/Black Phosphorus Nanosheets/P-doped BiOCl (Bi/BPNs/P-BiOCl) nanoflower photocatalyst was synthesized by a facile in-situ reduction process. The interfacial P-P bond between Black phosphorus nanosheets (BPNs) and P-doped BiOCl (P-BiOCl) was investigated by the XPS spectrum. The Bi/BPNs/P-BiOCl photocatalysts exhibited enhanced photocatalytic performance for H₂O₂ production and RhB degradation. The optimally modified photocatalyst (Bi/BPNs/P-BiOCl-20) showed an excellent photocatalytic H₂O₂ generation rate of 4.92 mM/h and RhB degradation rate of 0.1169 min^-1 under simulated sunlight irradiation, which was 1.79 times and 1.25 times greater than the P-P bond free Bi/BPNs/BiOCl-20. The mechanism was investigated through charge transfer route, radical capture experiments, and band gap structure analysis, indicating that the formation of Z-scheme heterojunctions and interfacial P-P bond not only enhances the redox potential of the photocatalyst but also facilitates the separation and migration of photogenerated electrons-holes. This work might provide a promising strategy for constructing Z-scheme 2D composite photocatalysts combining interfacial heterojunction and elemental doping engineering for efficient photocatalytic H₂O₂ production and organic dye pollutant degradation.

Recent Progress of Three-dimensionally Ordered Macroporous (3DOM) Materials in Photocatalytic Applications: A Review

In recent years, three-dimensionally ordered macroporous (3DOM) materials have attracted tremendous interest in the field of photocatalysis due to the periodic spatial structure and unique physicochemical properties of 3DOM catalysts. In this review, the fundamentals and principles of 3DOM photocatalysts are briefly introduced, including the overview of 3DOM materials, the photocatalytic principles based on 3DOM materials, and the advantages of 3DOM materials in photocatalysis. The preparation methods of 3DOM materials are also presented. The structure and properties of 3DOM materials and their effects on photocatalytic performance are briefly summarized. More importantly, 3DOM materials, as a supported catalyst, are extensively employed to combine with various common materials, including metal nanoparticles, metal oxides, metal sulfides, and carbon materials, to enhance photocatalytic performance. Finally, the prospects and challenges for the development of 3DOM materials in the field of photocatalysis are presented.

Research status, challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve carbon peaking and carbon neutrality. Among them, the catalytic conversion of carbon dioxide to generate renewable fuels has received great attention. As one of these methods, photocatalysis has its unique properties and mechanism, which can only rely on sunlight without inputting other energy. It is an emerging discipline with great development prospects. The core of photocatalysis lies in the development of photocatalysts with high activity, high selectivity, low cost, and high durability. This review first introduces the background and mechanism of photocatalysis, then introduces various types of photocatalysts based on different substrates, and analyzes the methods and mechanisms to improve the activity and selectivity of photocatalysts. Finally, combining the plasmon effect with photocatalysis, the review analyzes the promoting effect of the plasmon effect on the photocatalytic carbon dioxide synthesis of renewable fuels, which provides a new idea for it.

Progress and perspectives on 1D nanostructured catalysts applied in photo(electro)catalytic reduction of CO2

Reducing CO₂ into value-added chemicals and fuels by artificial photosynthesis (photocatalysis and photoelectrocatalysis) is one of the considerable solutions to global environmental and energy issues. One-dimensional (1D) nanostructured catalysts (nanowires, nanorods, nanotubes and so on.) have attracted extensive attention due to their superior light-harvesting ability, co-catalyst loading capacity, and high carrier separation rate. This review analyzed the basic principle of the photo(electro)catalytic CO₂ reduction reaction (CO₂ RR) briefly. The preparation methods and properties of 1D nanostructured catalysts are introduced. Next, the applications of 1D nanostructured catalysts in the field of photo(electro)catalytic CO₂ RR are introduced in detail. In particular, we introduced the design of composite catalysts with 1D nanostructures, for example loading 0D, 1D, 2D, and 3D materials on a 1D nanostructured semiconductor to construct a heterojunction to optimize the photo-response range, carrier separation and transport efficiency, CO₂ adsorption and activation capacity, and stability of the catalyst. Finally, the development prospects of 1D nanostructured catalysts are discussed and summarized. This review can provide guidance for the rational design of advanced catalysts for photo(electro)catalytic CO₂ RR.

Fabrication of a ternary NiS/ZnIn2S4/g-C3N4 photocatalyst with dual charge transfer channels towards efficient H2 evolution

As a renewable green energy, hydrogen has received widespread attention due to its huge potential in solving energy shortages and environment pollution. In this paper, a one-step solvothermal method was applied to grow ultra-thin g-C₃N₄ (UCN) nanosheets and NiS nanoparticles on the surface of ZnIn₂S₄ (ZIS). A ternary NiS/ZnIn₂S₄/ultra-thin-g-C₃N₄ composite material with dual high-speed charge transfer channels was constructed for the advancement of the photocatalytic H₂ generation. The optimal ternary catalyst 1.5wt.%NiS/ZnIn₂S₄/ultra-thin-g-C₃N₄ (NiS/ZIS/UCN) achieved a H₂ evolution yield reached to 5.02 mmolg^-1h^-1, which was 5.23 times superior than that of pristine ZnIn₂S₄ (0.96 mmolg^-1h^-1) and even outperform than that of the best precious metal modified 3.0 wt%Pt/ZnIn₂S₄ (4.08 mmolg^-1h^-1). The AQY at 420 nm could be achieved as high as 30.5%. The increased photocatalytic performance of NiS/ZIS/UCN could be ascribed to the type-I heterojunctions between intimated ZIS and UCN. In addition, NiS co-catalyst with large quantity of H₂ evolution sites, could result in efficient photo-induced charges separation and migration. Furthermore, the NiS/ZIS/UCN composite exhibited excellent H₂ evolution stability and recyclability. This work would also offer a reference for the design and synthesis of ternary co-catalyst with heterojunction composite for green energy conversion.

Emerging S-Scheme Photocatalyst

Photocatalysis is a green technology to use ubiquitous and intermittent sunlight. The emerging S-scheme heterojunction has demonstrated its superiority in photocatalysis. This article covers the state-of-the-art progress and provides new insights into its general designing criteria. It starts with the challenges confronted by single photocatalyst from the perspective of energy dissipation by borrowing the common behaviors in the dye molecule. Subsequently, other problems faced by single photocatalyst are summarized. Then a viable solution for these problems is the construction of heterojunctions. To overcome the problems and mistakes of type-II and Z-scheme heterojunctions, S-scheme heterojunction is proposed and the underlying reaction mechanism is summarized. Afterward, the design principles for S-scheme heterojunction are proposed and four types of S-scheme heterojunctions are suggested. Following this, direct characterization techniques for testifying the charge transfer in S-scheme heterojunction are presented. Finally, different photocatalytic applications of S-scheme heterojunctions are summarized. Specifically, this work endeavors to clarify the critical understanding on curved Fermi level in S-scheme heterojunction interface, which can help strengthen and advance the fundamental theories of photocatalysis. Moreover, the current challenges and prospects of the S-scheme heterojunction photocatalyst are critically discussed.

The selective production of CH4via photocatalytic CO2 reduction over Pd-modified BiOCl

The selective production of CH4via photocatalytic CO2 reduction was achieved over Pd-modified BiOCl.

A NiS co-catalyst decorated Zn3In2S6/g-C3N4 type-II ball-flower-like nanosphere heterojunction for efficient photocatalytic hydrogen production

Promoting the separation of photogenerated electron-hole pairs and enhancing the charge carrier transfer are critical in photocatalysis. In our work, a ball-flower-like NiS/Zn₃In₂S₆/g-C₃N₄ photocatalyst fabricated by a hydrothermal method exhibited superior performance for photocatalytic water splitting. The optimized 2.0% NiS/Zn₃In₂S₆/g-C₃N₄ rivaled noble metal based Pt/g-C₃N₄ and showed an apparent quantum efficiency (AQE) of 24.3% at 420 nm, with a H₂ yield of 4.135 mmol g^-1 h^-1, which was 30.4 and 9.51 times that of pure g-C₃N₄ and binary Zn₃In₂S₆/g-C₃N₄ composites, respectively. The experimental and characterization results suggested that the heterojunction formed between Zn₃In₂S₆/g-C₃N₄ and the decorating NiS co-catalyst cooperatively suppressed the electron-hole recombination and facilitated the charge carrier transfer, thus resulting in significant improvement of the H₂ evolution performance. Moreover, the increased specific surface area and the enhanced visible-light absorption also contributed to superior water splitting performance. The prepared ternary catalytic system with the heterojunction and non-noble metal co-catalyst has great potential as an alternative to noble metals for achieving cost-efficient water splitting systems.