Improving effect of lyophilization on functional properties of resistant starch preparations formed by acid hydrolysis and heat treatment

Multi-scale ultrasound induced composite coacervates of whey protein and pullulan polysaccharide on emulsion forming and stabilizing mechanisms

A non-destructive technique known as multi-scale ultrasound (MSU) was employed to modify the emulsion consisting of glycosylated bovine whey protein (WP) and pullulan (Pu). To assess the effect on the structural and emulsifying properties of the WP-Pu, the formulated emulsion, was treated with divergent MSU at (single: 20 kHz, 40 kHz, and 60 kHz; dual: 20-40 kHz, 40-60 kHz, and 20-60 kHz; and tri: 20-40-60 kHz) frequency for a duration of 30 min. The tri-frequency, treated emulsion showed improved emulsifying stability compared to the control and MSU-treated single, and dual-frequency samples, as indicated by the particle size, structural morphology, and adsorbed protein. The molecular docking and numerous spectral analysis provided evidence that WP can undergo successful phenolation. This modified form of WP then interacts with Pu through various forces, including H-bonding and other mechanisms, resulting in the formation of a composite emulsion. The rheological properties revealed that both the control emulsion and the MSU-treated emulsion exhibited non-Newtonian pseudoplastic flow behavior. This behavior is characterized by shear thinning, where the viscosity decreases with increasing shear rate. The shear rates tested ranged from 1 to 300 1/s, additionally, the degree of crystallinity increased from 18.2° to 19.4°. Overall, the tri-frequency effect was most pronounced compared to single and dual-frequency. Ultrasonication, an emerging non-thermal technology, proves to be an efficient approach for the formulation of WP-Pu composites. These composites have significant potential for use in drug delivery systems and functional foods.

Nutritional and Technological Properties of Albino Peach Palm (Bactris gasipaes) from the Amazon: Influence of Cooking and Drying

This study aimed to subject the albino peach palm to cooking and drying processes and characterize the raw pulp (RP), cooked pulp (CP), raw pulp flour (RPF), and cooked pulp flour (CPF). The product's chemical composition, bioactive compounds, and physicochemical, color, thermal, morphological, and functional-technological properties were evaluated. The proximate composition showed that carbohydrates were the main constituents of all the products (69.59-72.08 g/100 g). The cooking process decreased the lipids (10.21 to 8.63 g/100 g), dietary fiber (13.64 to 12.81 g/100 g), and total sugar content (59.18 to 49.10 g/100 g) of the CP. The colorimetric parameters indicated a significant browning of the CP and CPF, which can be attributed to the Maillard reaction and lipid oxidation. After cooking, the total phenolic compound and ascorbic acid content decreased in the pulp. The RPF and CPF displayed different thermogravimetric behaviors. The spectral patterns in the infrared region showed the characteristic bands of organic compounds that are present in the structure of starches. The scanning electron microscopy showed amyloplast and fiber bundles with starches in the RP and gelatinized starch granules in the CP and CPF. The RPF presented small and heterogeneous starch granules with isolated amyloplast. The RPF and CPF showed different granulometric patterns and technological indices. The results suggest that the pulp and flour from the pulp of albino peach palms can be exploited by the food, pharmaceutical, and biotechnological industries.

Understanding the impact of Pulsed Electric Fields treatment on the thermal and pasting properties of raw and thermally processed oat flours

The aim of this research was to investigate the effect of Pulsed Electric Fields (PEF) treatments (electric field strengths 2 and 4.4 kV/cm combined with specific energy inputs between 48 and 484 kJ/kg) on the thermal and pasting properties of oat flours. Colour, β-glucan content, particle size distribution, morphological characteristics, starch short-range molecular order, protein secondary structure, thermal, and pasting properties of raw (dehulled and milled) and thermally processed (kilned at 115 °C for 30 min and steamed at 100-104 °C for 18 min under industrial process condition) oat flours under the influence of PEF treatment were evaluated. Results showed that PEF treatment, applied at any intensity, led to considerable changes in the structural properties especially when applied on raw oat flour. Both types of oat flour experienced an increase in particle size (up to four-fold), damage of starch granule morphology, and modifications in starch short-range molecular order and protein secondary structures as a result of PEF treatment. These physical changes observed after PEF treatment, particularly at increasing specific energy input, coincided with the thermal and pasting behaviour of PEF-treated oat flours, which include a decrease in gelatinisation enthalpy (up to 80%), increase in thermal transition temperatures (at least 3 °C), decrease in overall viscosity profile, and reduction in pasting temperature (up to 12 °C). Overall results suggested that PEF treatment improved majorly on starch-related functionality of oat, such as increased the pasting stability of raw and thermally processed oat flours and at the same time enhanced the retrogradation property (reduced syneresis and hardness) of raw oat flour, under lower temperature requirement without affecting pasting time. This research demonstrated the potential of PEF treatment in modifying the thermal and pasting properties of oat flour, thereby offering opportunities for novel products for food industry.

A combination of coarse-grain molecular dynamics to investigate the effects of sodium dodecyl sulfate on grafted reaction of starch-based adhesive

Graft copolymerization is a challenging step in preparation of starch-based adhesive due to the complexity and instantaneity. A combination of both experimental and simulation methodology has been employed to investigate the process at microscopic level. Through a series of characterizations of adhesives and copolymers with different SDS (sodium dodecyl sulfate) contents, 2% (w/w, 2g SDS/100 g starch) SDS demonstrated outstanding balance between the starch grafted percentage and interfacial properties. The coarse-grain molecular dynamics (CGMD) was utilized to reveal the molecular distribution and migratory mechanisms during the reaction by calculating radius distribution function (RDF) and mean square displacement (MSD). Starch chains covering the monomers surface was found to exhibit longer radius of gyration (Rg). Furthermore, the interfacial models were constructed in this study, and interfacial tension between water and VAc beads was calculated to confirm the improvement in interfacial properties and the rationality of simulation with the addition of SDS.

Effect of Rice Processing towards Lower Rapidly Available Glucose (RAG) Favors Idli, a South Indian Fermented Food Suitable for Diabetic Patients

The Asian food pattern primarily embraces rice and rice-based products, which mainly comprise 90% starch. Among these various food products, Idli is mostly prepared through fermentation. It has high palatability, and the rapid and highly digestible nature of the food product results in a higher post-glucose level in diabetic patients. A heat-treated Idli rice sample was prepared by roasting parboiled rice at the temperature range of 155 to 165 °C for 65 to 75 s. Idli/rice-based Dokala made from heat-treated rice is better when compared to untreated rice in terms of its microbiological profile and physiochemical properties. The proximate composition of heat-treated parboiled rice Idli/Rice Dokala showed slightly higher values than the untreated parboiled rice Idli/Rice Dokala, which reveals that it has marginally higher nutritive value. Determination of the Rapidly Available Glucose (RAG) and Slowly Available Glucose (SAG) values, SEM analysis, resistant starch analysis, microbial assay, and in vivo studies were performed to determine the glycemic index (GI) and glycemic load in normal and diabetic persons. Sensory analysis also proved that heat-treated Idli/Rice Dokala is superior to untreated based on the color, flavor, appearance, taste, and texture.

Culled banana resistant starch-soy protein isolate conjugate based emulsion enriched with astaxanthin to enhance its stability

The conjugates of biomacromolecules such as proteins and polysaccharides have potential to stabilize the emulsion system and encapsulate valuable bioactive compounds for biofortification in food systems. In this study, native banana starch (NBS) was isolated from green culled banana and modified into resistant starch (type III) by lintnerization followed by autoclaving-cooling process, resulting in lintnerized-autoclaved banana starch (LABS). Soy protein isolate (SPI) was used for developing the polysaccharide-protein conjugates i.e. LABS-SPI conjugate and used as wall material to stabilize the oil-in-water emulsion system. LABS-SPI conjugate emulsions were subjected to in vitro digestion model and oxidative stability evaluation. Furthermore, the emulsion system was enriched with astaxanthin and evaluated for its stability. The chemical finger printing of LABS-SPI conjugates showed stretching in immine and enaminol group of Schiff's bases, the CN stretching of Amadori product. During in vitro digestion LABS-SPI conjugate emulsion showed that the presence of resistant starch had an influence on the droplet digestion process and significantly (p < 0.05) lower free fatty acid release compared to emulsions stabilized by SPI alone. LABS-SPI conjugate emulsion system demonstrated higher stability of astaxanthin at storage temperatures (6, 20 and 37 °C), and can be used for biofortification of food and pharmaceutical formulations.

Pullulanase treatments to increase resistant starch content of black chickpea (Cicer arietinum L.) starch and the effects on starch properties

This study aimed to increase resistant starch (RS) content of black chickpeas (Cicer arietinum L.) by using pullulanase enzyme. Physicochemical and functional properties of enzyme treated starch (NE) was compared with that of enzyme-treated and gelatinized starch (GE) and the retrograded control starch (RC). RS contents for native black chickpea starch (NS) and black chickpea flour (NF) were measured as 15.2% and 5.0%, respectively. While for NE and GE, were found as 16.4% and 12.3%, respectively. Treatments made on the NS, increased the amount of RDS and reduced the amount of SDS significantly (p < .05). When the effect of enzyme application-autoclaving and retrogradation were compared, 41.3% increase in RS content was measured. In this study; RS3 production from black chickpea starch by a pullulanase enzyme was successfully performed. Enzymatic applications also improved the functional properties such as water absorption capacity, water solubility index value, fat binding capacity and emulsifying capacity. This enzyme treated black chickpea starch samples, being functionally improved, will possibly help to produce different products with desired quality parameters. Therefore, instead of native starch, pullulanase treated black chickpea starch may be used as a functional ingredient for increasing the amount of RS in food formulations.

Physicochemical Changes and Resistant-Starch Content of Extruded Cornstarch with and without Storage at Refrigerator Temperatures

Effects of extrusion cooking and low-temperature storage on the physicochemical changes and resistant starch (RS) content in cornstarch were evaluated. The cornstarch was conditioned at 20%–40% moisture contents and extruded in the range 90–130 °C and at screw speeds in the range 200–360 rpm. The extrudates were stored at 4 °C for 120 h and then at room temperature. The water absorption, solubility index, RS content, viscoelastic, thermal, and microstructural properties of the extrudates were evaluated before and after storage. The extrusion temperature and moisture content significantly affected the physicochemical properties of the extrudates before and after storage. The RS content increased with increasing moisture content and extrusion temperature, and the viscoelastic and thermal properties showed related behaviors. Microscopic analysis showed that extrusion cooking damaged the native starch structure, producing gelatinization and retrogradation and forming RS. The starch containing 35% moisture and extruded at 120 °C and 320 rpm produced the most RS (1.13 g/100 g) after to storage at low temperature. Although the RS formation was low, the results suggest that extrusion cooking could be advantageous for RS production and application in the food industry since it is a pollution less, continuous process requiring only a short residence time.

Effects of autoclaving temperature and storing time on resistant starch formation and its functional and physicochemical properties

In this study effects of autoclaving temperature (140-145°C) and storing time (24, 48 and 72 h) on resistant starch (RS) formation from high amylose corn starch were investigated and functional and pasting properties of RS preparations were determined. High autoclaving temperature (145 °C) and long storing time (72 h) showed beneficial impacts on RS formation. Significant decreases were observed in all RVA viscosities of RS preparations as the autoclaving temperature increased. There was significant effect of storage time on all RVA parameters of RS preparations within each autoclaving temperature. The water binding values of RS preparations autoclaved at 145 °C were higher than those of the samples autoclaved at 140 °C. RS preparations had approximately 2-fold higher emulsion capacity values than the native starch. Thermal enthalpy (ΔH) values of RS preparations were lower than those of native starch. Autoclaving temperature and storing time had no effects on TO and TP.

Effect of the Addition of Stearic Acid on Starch Properties

The effect of the addition of stearic acid on properties of wheat, mung bean and potato starches were studied. Soluble amylose content in three kinds of starches was significantly reduced. Both λmax values and the 630/520 nm ratio were decreased. Stearic acid added starches showed a significantly higher pasting temperature, breakdown and setback compared to the native starches as measured by RVA. Texture properties analysis showed that hardness of wheat and mung bean starches significantly decreased, while that of potato starch significantly increased after the addition of stearic acid. Diffraction peaks of wheat, mung bean and potato starches appeared at 22° which indicated that complex formation by X-ray diffraction

Production of resistant starch from taro (Colocasia esculenta L. Schott) corm and determination of its effects on health by in vitro methods

The aim of the study was the production of resistant starch from taro (Colocasia esculenta L. Schott) corm and determination of its effects on health by in vitro methods. Starch was isolated from taro corms with 98% purity, and 10.4±0.5% amylose content. By application of heating, autoclaving, enzymatic debranching, retrogradation, and drying processes to taro starch for two times, resistant starch (RS) content was increased 16 fold (35.1±1.9%, dry basis). The expected glycemic index (eGI) of taro starch and taro resistant starch was determined as 60.6±0.5 and 51.9±0.9, respectively and the decrease in the glycemic index of taro resistant starch was found as statistically significant (P<0.05). The in vitro binding of bile acids by taro starch and taro resistant starch relative to cholesterol decreasing drug cholestyramine were 5.2±0.2% and 7.6±1.7%, respectively.

Comparison of A and B starch granules from three wheat varieties

Three starches from the wheat varieties AK58, ZM18 and YZ4110 were separated into large (A) and small (B) granules, which were characterized structurally and evaluated for their functional properties. SEM results showed that the size of A-granules from ZM18 and YZ4110 were about the same, but the sizes of A-granules and B-granules from AK58 were larger than those of ZM18 and YZ4110. FTIR spectra showed that all the samples exhibited a similar pattern, with seven main modes with maximum absorbance peaks near 3,500, 3,000, 1,600, 1,400, 1,000, 800, 500 cm⁻¹. The B-granules of ZM18 and YZ4110 had less amylose content, although the difference among the total amylose contents of the three unfractionated starches was not significant. X-ray diffraction (XRD) patterns showed predominantly A-type crystallinity for all the starches. The A-granules showed sharper XRD patterns than the other starches. DSC analysis showed that the A-granules had broader ranges of gelatinization temperatures than the B-granules from the same wheat variety. The gelatinization enthalpy (ΔH) of A-granules was higher than that of B-granules. AK58 exhibited the smallest enthalpy, while ZM18 showed the largest enthalpy. In pasting tests, the A-granule starch of AK58 had higher peak, final and setback viscosity, lower breakdown and pasting temperature, and the B-granule starch and unfractionated starch of AK58 had lower peak, breakdown, final and setback viscosity and higher pasting temperature than ZM18 and YZ4110.