Structure and enzymatic resistivity of debranched high temperature–pressure treated high-amylose corn starch

Molecular weight-mediated interaction changes for enhancing structural stability, release behavior and M cells-targeting transport efficacy of starch-based nanoparticles

Molecular weight (Mw) of ligand-mediated nanocarriers plays a pivotal role in their architecture and properties. In this study, self-assembled ovalbumin (OVA)-loaded nanoparticles were meticulously engineered by starch polyelectrolytes with different Mw. Results unveiled that, tailoring Mw of GRGDS pentapeptides-grafted carboxymethyl starch (G-CMS) displayed strong binding-affinity and transport efficiency through microfold cells (M cells) pathway in the simulated intestinal epithelial cell monolayer in which M cells were randomly located in the Caco-2 cells monolayer. Notably, nanoparticles assembled from G-CMS with relatively higher Mw exhibited more compact structures due to the stronger interactions between layers compared to that with relatively lower Mw, which rendered remarkably stable and only 19.01 % in vitro OVA leakage under conditions of the upper gastrointestinal tract. Subsequently, more intact nanoparticles reached M cells after in vitro digestion and exhibited higher transport efficiency through the M cells pathways (apparent permeability: 9.38 × 10-5 cm/s) than Caco-2 cells, attributing to specific- and non-specific binding affinity towards M cells. Therefore, optimal Mw tailoring of starch polyelectrolytes can mediate the molecular interactions among their assembled layers and the interactions with M cells to balance the structural compactness, release and transport efficacy of nanoparticles, holding promise for advancing M cells-targeting oral delivery technologies.

Sub-high amylose maize starch: an ideal substrate to generate starch with lower digestibility by fermentation of Qu

BACKGROUND

The fermentation of Qu (FQ) is a novel method to modify the properties of starch to expand its application and especially to increase the resistant starch (RS) content. Using waxy maize starch (WMS) as a fermentation substrate can increase the RS content significantly but it may be time consuming and not cost effective due to the almost negligible RS content of WMS. To solve this problem, we hypothesized that sub-high amylose starch (s-HAMS), with an amylose content close to 50% could be an ideal substrate for FQ.

RESULTS

The results showed that FQ did not change the shape and the particle size of starch granules, the gelatinization peak (Tp), or the conclusion temperature (Tc), but the slowly digested starch content declined. Rapidly digested starch content fluctuated during FQ and the amylose content decreased within 36 h and then increased. Within 24h, FQ significanlty increased these values: the RS content, relative crystallinity (RC), the ratio of FTIR absorbances at 1047/1022cm-1, the diffraction peak at 19.8° in X-ray diffraction (XRD), and the gelatinization onset temperature (To) increased significantly, within 24 h of FQ. However, after 24 h of fermentation, the RS content, RC, the ratio of FTIR absorbances at 1047/1022 cm-1, and gelatinization enthalpy (ΔH) decreased significantly.

CONCLUSION

Sub-high amylose starch is more suitable for FQ to produce low digestibility starch, and the increase in RS may be due to the formation of 'amylose-lipid' complexes (RS5). © 2024 Society of Chemical Industry.

The mechanisms in the gut microbiota regulation and type 2 diabetes therapeutic activity of resistant starches

Resistant starch (RS) can potentially prevent type 2 diabetes through the modulation of intestinal microbiota and microbial metabolites. Currently, it has been wildly noted that altering the intestinal microbial composition and short-chain fatty acids levels can achieve therapeutic effects, although the specific mechanisms were rarely elucidated. This review systematically explores the structural characteristics of different RS, analyzes the cross-feeding mechanism utilized by intestinal microbiota, and outlines the pathways and targets of butyrate, a primary microbial metabolite, for treating diabetes. Different RS types may have a unique impact on microbiota composition and their cross-feeding, thus exploring regulatory mechanisms of RS on diabetes through intestinal flora interaction and their metabolites could pave the way for more effective treatment outcomes for host health. Furthermore, by understanding the mechanisms of strain-level cross-feeding and metabolites of RS, precise dietary supplementation methods targeted at intestinal composition and metabolites can be achieved to improve T2DM.

Controlling sodium chloride concentration modulates the supramolecular structure and sol features of wheat starch-acetylated starch binary matrix

The sol performance of wheat starch (WS) matrix incorporating acetylated starch (AS) is crucial for the processing and quality features of wheat products. From a supramolecular structure view, how regulating salt (sodium chloride) concentration modulates the sol features, e.g., pasting, zero-shear viscosity (ZSV) and thixotropy of WS-AS binary matrix was explored. Compared to the salt-free counterpart, the saline matrices exhibited a delayed pasting profile and a decreased viscoelasticity. Thereinto, the sol at 0.02 M NaCl exhibited the smallest ZSV (23,710 Pa·s) and the greatest in-shear recovery ratio (33.7 %). Such variations could be attributed to the weakened coil-helix, nematic-smectic and isotropy-anisotropy transitions from a side-chain liquid-crystalline perspective. Meanwhile, the correlation length (ξ) and radius of gyration (Rg) obtained from small angle X-ray scattering analysis were increased by 5.2 and 9.6 Å respectively, which disclosed a restrained entanglement and an enhanced chain mobility. These results would provide a reference for the design of fluid/semisolid products with optimized qualities.

Amylose content controls the V-type structural formation and in vitro digestibility of maize starch-resveratrol complexes and their effect on human gut microbiota

The chain structure of starch affects its interaction with polyphenol molecules which in turn determines the nutritional function of starch. In this study, starch with different amylose content including waxy maize starch (WMS), normal maize starch (NMS) and G50 high-amylose maize starch (G50) were selected to complex with resveratrol (RA) in high-pressure homogenization (HPH) environment, and structural changes of the complexes, together with their effects on in vitro digestibility and gut microbiota were discussed. The results showed that with increasing amylose content, RA could form more inclusion complex with starch through non-covalent bonds accompanied by the increased single helix structure, V-type crystalline structure, compact nano-aggregates and total ordered structure content, which thus endowed the complex lower digestibility and intestinal probiotic function. Notably, when RA addition reached 3 %, the resistant starch (RS) content of HP-G50-3 % rose to 29.2 %, correspondingly increased the relative abundance of beneficial gut microbiota such as Megamonas and Bifidobacterium, as well as the total short-chain fatty acids (SCFAs) content. Correlation analysis showed that V-type crystalline structure positively correlated with the growth of Pediococcu and Blautia (p < 0.05) for producing SCFAs. These findings provided feasible ideas for the development of personalized nutritional starch-based foods.

Meta-analysis reveals gut microbiome and functional pathway alterations in response to resistant starch

Resistant starch (RS) has the ability to improve the structure of the gut microbiota, regulate glucolipid metabolism and maintain the health of the human body, and has been extensively studied by many scholars in recent years. However, previous studies have provided a wide range of results on the differences in the gut microbiota after RS intake. In this article, we performed a meta-analysis of a total of 955 samples of 248 individuals from the seven studies included to compare the gut microbiota of the baseline and the end-point of RS intake. At the end-point, RS intake was related to a lower gut microbial α-diversity and higher relative abundance of Ruminococcus, Agathobacter, Faecalibacterium and Bifidobacterium, and the functional pathways of the gut microbiota related to the carbohydrate metabolism, lipid metabolism, amino acid metabolism and genetic information processing were higher. Different types of resistant starch and different populations led to varied responses on the gut microbiome. The altered gut microbiome may contribute to improve the blood glucose level and insulin resistance, which may be a potential treatment route for diabetes, obesity and other metabolic diseases.

High-amylose maize starch: Structure, properties, modifications and industrial applications

High-amylose maize refers to a special type of maize cultivar with a 50 %-90 % amylose content of the total starch. High-amylose maize starch (HAMS) is of interest because it possesses unique functionalities and provides many health benefits for humans. Therefore, many high-amylose maize varieties have been developed via mutation or transgenic breeding approaches. From the literature reviewed, the fine structure of HAMS is different from the waxy and normal corn starches, influencing its gelatinization, retrogradation, solubility, swelling power, freeze-thaw stability, transparency, pasting and rheological properties, and even in vitro digestion. HAMS has undergone physical, chemical, and enzymatical modifications to enhance its characteristics and thereby broaden its possible uses. HAMS has also been used for the benefit of increasing resistant starch levels in food products. This review summarizes the recent developments in our understanding of the extraction and chemical composition, structure, physicochemical properties, digestibility, modifications, and industrial applications of HAMS.

The Starch Physicochemical Properties between Superior and Inferior Grains of Japonica Rice under Panicle Nitrogen Fertilizer Determine the Difference in Eating Quality

Nitrogen fertilizer is essential for rice growth and development, and topdressing nitrogen fertilizer at panicle stage has a huge impact on rice grain quality. However, the effect of panicle nitrogen fertilizer (PNF) on starch physicochemical properties and fine structure remain unclear. In this study, four PNF levels (0, 60, 120, 180 kg N ha−1) were grown with the same basal and tiller fertilizer (150 kg N ha−1). The starch physicochemical properties, fine structure, texture properties and eating quality of two japonica rice were determined. We found that the content of total protein, crude fat and amylose between superior and inferior grains were significantly different. Compared with inferior grains, superior grains had low relative crystallinity, good pasting characteristics and outstanding eating quality. With the increase of nitrogen application rates, the starch volume mean diameter was lower; the average chain length of amylopectin was longer; and the relative crystallinity of starch was higher. The changes above in starch structure resulted in an increase in starch solubility, swelling power and gelatinization enthalpy, and led to a decrease in retrogradation enthalpy, retrogradation percentage and pasting viscosity, consequently contributing to the increase in hardness and stickiness of rice and the deterioration of taste value. These results indicated that topdressing PNF lengthened the amylopectin chain, decreased starch granule size, enhanced crystallization stability and increased gelatinization enthalpy, which were the direct reasons for the deterioration of cooking and eating quality.

Effect of Different Ratios of Glycerol and Erythritol on Properties of Corn Starch-Based Films

The demand for biodegradable products has increased; hence, a suitable method for producing green composites is essential. This study prepared corn starch-based films using the solution casting method, and the physicochemical properties of the prepared films were investigated using a mixture of glycerol (GLY) and erythritol (ERY) at different ratios (4:0, 3:1, 2:2, 1:3, and 0:4) as plasticizing agents. The crystallinity, hydrophilicity, mechanical properties, oxygen and water vapor, surface roughness, and thermal stability of corn starch-based films were analyzed using small-angle X-ray diffraction, water contact angle, automatic tensile testing machine, oxygen permeability tester and water vapor permeability analyzer, atomic force microscope, and thermogravimetric analyzer. With the increase in GLY ratio, the thickness, water-solubility, water content, water vapor permeability, elongation at break, oxygen permeability and V-shaped crystallization of the corn starch-based films increased. The tensile strength and the thermal stability decreased with increasing the GLY ratio. We developed a new plasticizer using glycerol and erythritol to improve the properties of starch films and provided the basis for the industrial production of corn starch-based films.

High-amylose starch: Structure, functionality and applications

Starch with a high amylose (AM) content (high AM starch, HAS) has attracted increasing research attention due to its industrial application potential, such as functional foods and biodegradable packaging. In the past two decades, HAS structure, functionality, and applications have been the research hotspots. However, a review that comprehensively summarizes these areas is lacking, making it difficult for interested readers to keep track of past and recent advances. In this review, we highlight studies that benefited from rapidly developing techniques, and systematically review the structure, functionality, and applications of HAS. We particularly emphasize the relationships between HAS molecular structure and physicochemical properties.

Microwave Cooking Enriches the Nanoscale and Short/Long-Range Orders of the Resulting indica Rice Starch Undergoing Storage

The chain reorganization of cooked starch during storage plays an important role in the performance of starchy products such as rice foods. Here, different analytical techniques (such as small-angle X-ray scattering) were used to reveal how microwave cooking influences the chain assembly of cooked indica rice starch undergoing storage for 0, 24, or 48 h. While stored, more short-range double helices, long-range crystallites, and nanoscale orders emerged for the microwave-cooked starch than for its conventionally cooked counterpart. For instance, after storage for 24 h, the microwave-cooked starch contained 46.8% of double helices, while its conventionally cooked counterpart possessed 34.3% of double helices. This could be related to the fact that the microwave field caused high-frequency movements of polar groups such as hydroxyls, which strengthened the interactions between starch chains and water molecules and eventually their assembly into double helices, crystallites, and nanoscale orders. This work provides further insights into the chain reassembly of microwave-cooked starch undergoing storage, which is closely related to the quality attributes of starch-based products.

A review of wheat starch analyses: Methods, techniques, structure and function

Wheat starch has received much attention as an important source of dietary energy for humans, an interesting carbohydrate and a polymeric material. The understanding of the structure and function of wheat starch has always been accompanied by newer technological tools. On the one hand, the general knowledge of wheat starch is constantly being enriched. On the other hand, an increasing number of studies are trying to add new insights to what is already known from two frontier perspectives, namely, wheat starch supramolecular structures and wheat starch fine structures (CLDs). This review describes the structure and function of wheat starch from the perspective of wheat starch analysis techniques (instruments).

Effects of Hydrothermal and Microwave Dual Treatment and Zein on the Enzymolysis of High Amylose Corn Starch

Resistant starch (RS) type 2-high-amylose corn starch (HACS) was subjected to simultaneous hydrothermal (25% moisture content, 90 °C for 12 h) and microwave (35% moisture content, 40 W/g microwaving for 4 min) treatment and zein (at a zein to treated starch ratio of 1:5, 50 °C for 1 h) to improve its resistance to enzymolysis. Scanning electron microscopy (SEM) highlighted the aggregation and adhesion of the composite. The average particle size of the composite (27.65 μm) was exceeded that of both the HACS (12.52 μm) and the hydrothermal and microwave treated HACS (hydro-micro-HACS) (12.68 μm). The X-ray diffraction results revealed that the hydro-micro-HACS and composite remained B-type, while their crystallinity significantly decreased to 16.98% and 12.11%, respectively. The viscosity of the hydro-micro-HACS and composite at 50 °C was 25.41% and 35.36% lower than that of HACS. The differential scanning calorimetry (DSC) results demonstrated that the composite displayed a new endothermic peak at 95.79 °C, while the weight loss rate and decomposition temperature were 7.61% and 2.39% lower than HACS, respectively. The RS content in HACS, the hydro-micro-HACS, and composite was 47.12%, 57.28%, and 62.74%, respectively. In conclusion, hydrothermal and microwave treatment combined with zein provide an efficient physical strategy to enhance the RS type 2-HACS.

Mesona chinensis polysaccharide accelerates the short-term retrogradation of debranched waxy corn starch

The effect of non-starch polysaccharides on the structural and functional properties of native starch have been extensively studied. However, the effect of non-starch polysaccharides on the structural characteristics of debranched starch, a kind of enzymatic modified starch, remains unclear. The aim of this study is to investigate the effects of Mesona chinensis polysaccharide (MP) on starch retrogradation and structural properties of debranched waxy corn starch (DWS). The results showed that only appropriate addition of MP (0.5 or 1%) can effectively promote the short-term retrogradation of DWS, while excessive MP (3 or 5%) had a negative effect. Gel hardness results revealed that the short-term retrogradation (24 h) of DWS could be divided into two phases. The retrogradation of DWS-MP gels mainly occurred at first stage (0–4 h), which was demonstrated by the rapid increase of gel hardness and relative crystallinity in this stage. In the second stage (4–24 h), DWS-MP gels were more likely to undergo the aggregation of starch granules as proved by SEM and particle size results. The degree of short-range ordered decreased during the total retrogradation stage. Overall, this work aims to provide an insight into the effect of non-starch polysaccharides on the short-term retrogradation of DWS.

•

Only the appropriate addition of MP could accelerate the retrogradation of DWS.

•

The short-term retrogradation of DWS could be divided into two stages.

•

Gel hardness and relative crystallinity increased significantly in the first stage.

•

The degree of short-range ordered reduced monotonically with retrogradation time.

•

Starch particles mainly underwent aggregation in the second stage.

Pickering emulsifiers based on enzymatically modified quinoa starches: Preparation, microstructures, hydrophilic property and emulsifying property

Quinoa starch was developed as a new kind of Pickering emulsifier by enzymatic modification. The morphological structure, crystalline structure, lamellar structure, fractal structure, particle size distribution, contact angle, emulsion index (EI), and emulsion micromorphology were studied to explore the relationship between structure characteristics, hydrophilic property, and emulsifying properties of enzymatically modified (EM) quinoa starches. With the increasing enzymatic hydrolysis time in the test range of 0-9 h, particle size of EM quinoa starch decreased, and the broken starch and contact angle of EM quinoa starch increased; the EI value of emulsions with EM quinoa starch increased, and the oil droplet size of emulsions with EM quinoa starch decreased. It suggested that both the smallest particle size and the closest extent of the contact angle to 90° derived the best emulsifying property of EM-9. The EM quinoa starch had higher emulsifying capacity at higher oil volume fraction (Φ) (50%) than at lower Φ (20%), proving that the EM starch has potential to be used as Pickering emulsifiers in higher oil products, such as salad dressing.

Structural Features and Digestibility of Corn Starch With Different Amylose Content

In this study, the in vitro digestibility of corn starch with different amylose content was determined. The results showed that waxy corn starch (WCS) and corn starch (CS) have the highest digestibility, while high amylose corn starch (HACS) has a higher content of resistant starch (RS). Besides being related to amylose content, RS content is also closely related to particle shape, debranched fine structure, molecular structure, and semi-crystalline structure. HACS can maintain a complete particle structure after gelatinization and enzymolysis; differential scanning calorimetry showed a positive correlation between gelatinization enthalpy and RS content. As the amylose content increased, the content of fa (DP 6–12) decreased, while the content of fb2 (DP 25–36) and fb3 (DP ≥ 37) increased, which in-turn decreased the cluster polymer formed by short branch chains, and the formation of more hydrogen bonds between long chain branches improved starch stability. D, which characterizes the compactness of starch semi-crystalline structure, increased with the increase of RS content. HACS 60 with the highest RS content had a unique surface fractal structure between 7.41 < d (2π/q) < 10.58 nm, indicating that the dense structure is effective in maintaining the RS content.

Preparation and evaluation of starch-based extrusion-blown nanocomposite films incorporated with nano-ZnO and nano-SiO2

The effects of nano-ZnO and nano-SiO₂ nanoparticles on the properties of starch-based films prepared by extrusion blowing were investigated in this study. New hydrogen bonds between hydroxypropyl starch (HS) and nanoparticles during the extrusion process were formed as shown by Fourier transform infrared spectroscopy (FTIR). The diffraction patterns of nanocomposite films reinforced with nano-ZnO were similar to those of nano-ZnO, except that the peak intensity decreased, whereas, the addition of SiO₂ nanoparticles decreased the intensity of the main characteristic peaks, regardless of the HS and nano-ZnO reinforced films. The thermal stability, tensile strength, moisture barrier property, and surface hydrophobicity of nanocomposite films were improved with the incorporation of nano-ZnO and nano-SiO₂, the finding that could be attributed to a strong interplay between nano-ZnO, nano-SiO₂, and the starch matrix during the extrusion film blowing process. Similarly, the nano-ZnO/nano-SiO₂ composite-reinforced films showed smooth, flat, and uniform appearances by scanning electron microscopy (SEM) and atomic force microscope (AFM) tests. In sum, Nano-ZnO and nano-SiO₂ nanoparticles can be used as composite reinforcing agents for preparation of starch-based films through extrusion blowing.

Application of starch nanoparticles as host materials for encapsulation of curcumin: Effect of citric acid modification

To encapsulate curcumin, absolute ethanolic curcumin solution with various content (300-1200 μg) was added to aqueous dispersion of citric acid-modified starch nanoparticles (M.SNPs) with various contents (0.5-2.5%), and then ethanol of the mixture was evaporated by nitrogen gas purge for 40 min (ethanol content decreased to 1%). SNPs (100 mg) could encapsulate 75.7 μg of curcumin in matrices of the composite, while 100 mg of M.SNPs could encapsulate 144.9 μg of curcumin. The XRD results revealed that curcumin was amorphously encapsulated in the composite, and hydrogen bond formation between M.SNPs and curcumin was one of the major driving forces for encapsulation as suggested by FT-IR. The composites had a spherical shape and mean particle size of the composites was increased from 136.3 to 255.3 nm with higher curcumin content in the matrices of composites. UV, pH, and thermal stability of curcumin significantly enhanced by the encapsulation, which was further increased when using M.SNPs and/or higher content of host materials. For the release of curcumin in simulated intestinal fluid digestion, release mechanism explained by Korsmeyer-Peppas model. For M.SNPs, k value was decreased from 13.097 to 2.938 as addition level of host material increased from 0.5 to 2.5%.

Plasticized Starch/Agar Composite Films: Processing, Morphology, Structure, Mechanical Properties and Surface Hydrophilicity

Natural biopolymers, which are renewable, widely available, biodegradable, and biocompatible, have attracted huge interest in the development of biocomposite materials. Herein, formulation–property relationships for starch/agar composite films were investigated. First, rapid visco analysis was used to confirm the conditions needed for their gelation and to prepare filmogenic solutions. All the original crystalline and/or lamellar structures of starch and agar were destroyed, and films with cohesive and compact structures were formed, as shown by SEM, XRD, and SAXS. All the plasticized films were predominantly amorphous, and the polymorphs of the composite films were closer to that of the agar-only film. FTIR results suggest that the incorporation of agar restricted starch chain interaction and rearrangement. The addition of agar to starch increased both tensile strength and elongation at break, but the improvements were insignificant after the agar content was over 50 wt.%. Contact angle results indicate that compared with the other samples, the 4:6 (wt./wt.) starch/agar film was less hydrophilic. Thus, this work shows that agar dominates the structure and properties of starch/agar composites, and the best properties can be obtained with a certain starch/agar ratio. Such composite polysaccharide films with tailored mechanical properties and surface hydrophilicity could be useful in biodegradable packaging and biomedical applications (wound dressing and tissue scaffolding).

Effect of different ionic liquids acting as plasticizers on the multi-scale structures and physical properties of hydroxypropyl methylcellulose/monosodium phosphate photophobic film

Different ionic liquid (IL)s were added to hydroxypropyl methylcellulose /monosodium phosphate (HPMC/MSP) photophobic film to improve its ductility, and their effects on its multi-scale structures and physical properties were studied. After adding these ILs, smoothness of the fractal structure, tensile strength, modulus of the film did not change obviously, while the crystallinity, the number of holes, and elongation increased, the hole size and T_g decreased. Compared to films with other ILs, the film with 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF₄) showed the largest elongation and crystallinity, the smallest hole size, the least holes, and highest whiteness. The film with 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) showed the largest water content and the lowest T_g. The increased elongation proved that all these ILs could improve the ductility of the film, among which, [EMIM]BF₄ had the strongest plasticizing effect.

Effect of Freeze-Drying on Quality and Grinding Process of Food Produce: A Review

Freeze-drying is an important processing unit operation in food powder production. It offers dehydrated products with extended shelf life and high quality. Unfortunately, food quality attributes and grinding characteristics are affected significantly during the drying process due to the glass transition temperature (during drying operation) and stress generated (during grinding operation) in the food structure. However, it has been successfully applied to several biological materials ranging from animal products to plants products owning to its specific advantages. Recently, the market demands for freeze-dried and ground food products such as spices, vegetables, and fruits are on the increase. In this study, the effect of the freeze-drying process on quality attributes, such as structural changes, the influence of glass transition during grinding, together with the effect on grinding efficiency in terms of energy requirement, grinding yield, and morphological changes in the powder as a result of temperature, drying time were discussed. An overview of models for drying kinetics for freeze-dried food sample, and grinding characteristics developed to optimize the drying processes, and a prediction of the grinding characteristics are also provided. Some limitations of the drying process during grinding are also discussed together with innovative methods to improve the drying and grinding processes.

Structural Characterization and Digestibility of Curcumin Loaded Octenyl Succinic Nanoparticles

Curcumin displays anti-cancer, anti-inflammatory and anti-obesity properties but its water insolubility limits the wholesome utility. In this study, curcumin has been encapsulated in an amphiphilic biopolymer to enhance its water solubility. This was accomplished through self-assembly of octenyl succinic anhydride-short glucan chains (OSA-SGC) and curcumin. The nanoparticles were prepared with the degree of substitution (DS) of 0.112, 0.286 and 0.342 of OSA. Thus prepared nanoparticles were in the range of 150-200 nm and display high encapsulation efficiency and high loading capacity of curcumin. The Fourier-transform infrared (FTIR) and X-ray diffraction analyses confirmed the curcumin loading in the OSA-SGC nanoparticles. The complexes possessed a V-type starch structure. The thermo gravimetric analysis (TGA) revealed the thermal stability of encapsulated curcumin. The OSA-SGC nanoparticles greatly improved the curcumin release and dissolution, and in-turn promoted the sustained release.