Endosperm and aleurone cell structure in barley and wheat as studied by optical and Raman microscopy

Adsorption of aflatoxin B1 to corn by-products

The adsorption of aflatoxin B1 (AFB1) to natural fiber materials prepared from corn by-products was investigated in this study. The results showed that corn cob powder (CCP) dose, particle size, time (0.25-24 h), temperature (4, 20, 37, 50 and 100 °C) and pH (2-8), had significant effects on adsorption. The maximum adsorption (98%) was with particles 500-355 µm in size at 20 °C for 8 h, at the dose of 50 mg mL-1. The adsorption fitted pseudo-second-order model and Langmuir isotherm well. Besides, CCP had a higher adsorption capacity to AFB1 than any single cell wall components of corn, which indicated that capillary effect happened in cell wall might be the main reason for adsorption. The results also suggested that CCP could reduce AFB1 content from both liquid and solid food matrixes. Briefly, CCP displayed promising properties that could be developed in nature-based practical applications for food aflatoxin decontamination.

Coordinated Transcriptome and Metabolome Analyses of a Barley hvhggt Mutant Reveal a Critical Role of Tocotrienols in Endosperm Starch Accumulation

Tocotrienols and tocopherols (vitamin E) are potent antioxidants that are synthesized in green plants. Unlike ubiquitous tocopherols, tocotrienols predominantly accumulate in the endosperm of monocot grains, catalyzed by homogentiate geranylgeranyl transferase (HGGT). Previously, we generated a tocotrienol-deficient hvhggt mutant with shrunken barley grains. However, the relationship between tocotrienols and grain development remains unclear. Here, we found that the hvhggt lines displayed hollow endosperms with defective transfer cells and reduced aleurone layers. The carbohydrate and starch contents of the hvhggt endosperm decreased by approximately 20 and 23%, respectively. Weighted gene coexpression network analyses identified a critical gene module containing HvHGGT, which was strongly associated with the hvhggt mutation and enriched with gene functions in starch and sucrose metabolism. Metabolome measurements revealed an elevated soluble sugar content in the hvhggt endosperm, which was significantly associated with the identified gene modules. The hvhggt endosperm had significantly higher NAD(H) and NADP(H) contents and lower levels of ADPGlc (regulated by redox balance) than the wild-type, consistent with the absence of tocotrienols. Interestingly, exogenous α-tocotrienol spraying on developing hvhggt spikes partially rescued starch accumulation and endosperm defects. Our study supports a potential novel function of tocotrienols in grain starch accumulation and endosperm development in monocot crops.

Structural Characterization and Properties of Modified Soybean Meal Protein via Solid-State Fermentation by Bacillus subtilis

Soybean meal (SBM) is a high-quality vegetable protein, whose application is greatly limited due to its high molecular weight and anti-nutritional properties. The aim of this study was to modify the protein of soybean meal via solid-state fermentation of Bacillus subtilis. The fermentation conditions were optimized as, finally, the best process parameters were obtained, namely fermentation temperature of 37 °C, inoculum amount of 12%, time of 47 h, and material-liquid ratio of 1:0.58, which improved the content of acid-soluble protein. To explore the utilization of modified SBM as a food ingredient, the protein structure and properties were investigated. Compared to SBM, the protein secondary structure of fermented soybean meal (FSBM) from the optimal process decreased by 8.3% for α-helix content, increased by 3.08% for β-sheet, increased by 2.71% for β-turn, and increased by 2.51% for random coil. SDS-PAGE patterns showed that its 25-250 KDa bands appeared to be significantly attenuated, with multiple newborn peptide bands smaller than 25 KDa. The analysis of particle size and zeta potential showed that fermentation reduced the average particle size and increased the absolute value of zeta potential. It was visualized by SEM and CLSM maps that the macromolecular proteins in FSBM were broken down into fragmented pieces with a folded and porous surface structure. Fermentation increased the solubility, decreased the hydrophobicity, increased the free sulfhydryl content, decreased the antigenicity, improved the protein properties of SBM, and promoted further processing and production of FSBM as a food ingredient.

Protein reservoirs of seeds are amyloid composites employed differentially for germination and seedling emergence

Seed protein localization in seed storage protein bodies (SSPB) and their significance in germination are well recognized. SSPB are spherical and contain an assembly of water-soluble and salt-soluble proteins. Although the native structures of some SSPB proteins are explored, their structural arrangement to the functional correlation in SSPB remains unknown. SSPB are morphologically analogous to electron-dense amyloid-containing structures reported in other organisms. Here, we show that wheat, mungbean, barley, and chickpea SSPB exhibit a speckled pattern of amyloids interspersed in an amyloid-like matrix along with native structures, suggesting the composite nature of SSPB. This is confirmed by multispectral imaging methods, electron microscopy, infrared, and X-ray diffraction analysis, using in situ tissue sections, ex vivo protoplasts, and in vitro SSPB. Laser capture microdissection coupled with peptide fingerprinting has shown that globulin 1 and 3 in wheat, and 8S globulin and conglycinin in mungbean are the major amyloidogenic proteins. The amyloid composites undergo a sustained degradation during germination and seedling growth, facilitated by an intricate interplay of plant hormones and proteases. These results would lay down the foundation for understanding the amyloid composite structure during SSPB biogenesis and its evolution across the plant kingdom and have implications in both basic and applied plant biology.

Current Application of Advancing Spectroscopy Techniques in Food Analysis: Data Handling with Chemometric Approaches

In today's era of increased food consumption, consumers have become more demanding in terms of safety and the quality of products they consume. As a result, food authorities are closely monitoring the food industry to ensure that products meet the required standards of quality. The analysis of food properties encompasses various aspects, including chemical and physical descriptions, sensory assessments, authenticity, traceability, processing, crop production, storage conditions, and microbial and contaminant levels. Traditionally, the analysis of food properties has relied on conventional analytical techniques. However, these methods often involve destructive processes, which are laborious, time-consuming, expensive, and environmentally harmful. In contrast, advanced spectroscopic techniques offer a promising alternative. Spectroscopic methods such as hyperspectral and multispectral imaging, NMR, Raman, IR, UV, visible, fluorescence, and X-ray-based methods provide rapid, non-destructive, cost-effective, and environmentally friendly means of food analysis. Nevertheless, interpreting spectroscopy data, whether in the form of signals (fingerprints) or images, can be complex without the assistance of statistical and innovative chemometric approaches. These approaches involve various steps such as pre-processing, exploratory analysis, variable selection, regression, classification, and data integration. They are essential for extracting relevant information and effectively handling the complexity of spectroscopic data. This review aims to address, discuss, and examine recent studies on advanced spectroscopic techniques and chemometric tools in the context of food product applications and analysis trends. Furthermore, it focuses on the practical aspects of spectral data handling, model construction, data interpretation, and the general utilization of statistical and chemometric methods for both qualitative and quantitative analysis. By exploring the advancements in spectroscopic techniques and their integration with chemometric tools, this review provides valuable insights into the potential applications and future directions of these analytical approaches in the food industry. It emphasizes the importance of efficient data handling, model development, and practical implementation of statistical and chemometric methods in the field of food analysis.

Effects of cereal grain cell wall composition and structure on starch digestion

BACKGROUND

Wheat is an important food crop, and its characteristics vary depending on the region of cultivation; different environments have varying effects on the composition of the grains. We previously reported the effects of environmental factors on wheat grain cell wall composition and structure.

METHODS

The variations in the structure of aleurone cell walls between different wheat samples were examined to determine the effects of aleurone cell walls on grain starch digestion properties. Ten different varieties of wheat grains with different aleurone cell wall structure and composition constituted a simple research system used to study their effect on the starch digestion of bread.

RESULTS

The aleurone cell wall thickness ranged from 3.05 μm to 4.67 μm, and the arabinose to xylose ration of water-extractable arabinoxylan was 0.79-0.97. With the increase in arabinoxylans content or cell wall thickness, the total digestibility of starch within the bread decreased; this phenomenon may be related to the changes in the interaction between polysaccharides and starch granules in this process.

CONCLUSION

Our study showed that the wheat cell wall structure has a great impact on starch hydrolysis, indicating that the change in the digestibility of starch in flour and bread may be due to changes in the cell wall structure leading to different combinations, thus affecting digestibility. The present study showed that the cell wall combines the starch granules during the bread-making process; thus, the diffusion of enzymes through the cell wall was hindered. This article is protected by copyright. All rights reserved.

Wheat bran layers: composition, structure, fractionation, and potential uses in foods

Wheat bran, the main by-product of dry milling of wheat, is currently mainly used in the animal feed industry, but has attracted attention as a food ingredient owing to its high dietary fiber and phytochemical contents, providing excellent physiological effects. The bran layers (aleurone layer, outer pericarp and intermediate layer) contain different compositions, structures, and nutrients, and have different properties. Each layer, when separated and isolated, potentially could find more extensive applications in foods. This triggered interest in isolating the bran layers using milling and wet- or dry-fractionation techniques based on their chemical or physical properties. The recent progress has allowed the production of commercial products from wheat bran layers, particularly aleurone-rich products, enhancing the value of wheat bran layers and their applications in food. The present review highlights the recent advances in studying the chemical composition including distribution of chemical components, physical structure, biopolymer matrix, and physicochemical properties of each wheat bran layer. Technologies to fractionate wheat bran layers and utilization of different bran layers in foods are discussed and reviewed, providing new strategies for improving the value of wheat bran and utilization of wheat bran in foods.

The Wheat Aleurone Layer: Optimisation of Its Benefits and Application to Bakery Products

The wheat aleurone layer is, according to millers, the main bran fraction. It is a source of nutritionally valuable compounds, such as dietary fibres, proteins, minerals and vitamins, that may exhibit health benefits. Despite these advantages, the aleurone layer is scarce on the market, probably due to issues related to its extraction. Many processes exist with some patents, but a choice must be made between the quality and quantity of the resulting product. Nonetheless, its potential has been studied mainly in bread and pasta. While the nutritional benefits of aleurone-rich flour addition to bread agree, opposite results have been obtained concerning its effects on end-product characteristics (namely loaf volume and sensory characteristics), thus ensuing different acceptability responses from consumers. However, the observed negative effects of aleurone-rich flour on bread dough could be reduced by subjecting it to pre- or post-extracting treatments meant to either reduce the particle size of the aleurone's fibres or to change the conformation of its components.

Cereal Endosperms: Development and Storage Product Accumulation

The persistent triploid endosperms of cereal crops are the most important source of human food and animal feed. The development of cereal endosperms progresses through coenocytic nuclear division, cellularization, aleurone and starchy endosperm differentiation, and storage product accumulation. In the past few decades, the cell biological processes involved in endosperm formation in most cereals have been described. Molecular genetic studies performed in recent years led to the identification of the genes underlying endosperm differentiation, regulatory network governing storage product accumulation, and epigenetic mechanism underlying imprinted gene expression. In this article, we outline recent progress in this area and propose hypothetical models to illustrate machineries that control aleurone and starchy endosperm differentiation, sugar loading, and storage product accumulations. A future challenge in this area is to decipher the molecular mechanisms underlying coenocytic nuclear division, endosperm cellularization, and programmed cell death.

Effect of synergistic fermentation of Lactobacillus plantarum and Saccharomyces cerevisiae on thermal properties of wheat bran dietary fiber-wheat starch system

A synergistic fermentation system was constructed using single strains of Lactobacillus plantarum and Saccharomyces cerevisiae cultured separately; wheat starches containing different wheat bran dietary fiber (WBDF) levels (0, 3, 6, 9 & 12%) were fermented in this system. The thermal properties of materials were measured by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and rapid viscosity analysis (RVA). The results showed that WBDF may alter the thermal behavior of starch by forming hydrogen bonds with the leached starch chains and limit the available water of starch. The viscosity properties (peak, trough, and final viscosity) and setback decreased, and they were negatively correlated with the WBDF levels. In addition, dynamic rheological measurements showed that the addition of WBDF significantly enhanced the elasticity of fermented starch gels while slightly improving the mechanical strength, and 6% level of WBDF had the largest contribution. This study provides some data for the production of high dietary fiber fermented flour products, both common and gluten-free.

Spatial Distribution of Polyphenolic Compounds in Corn Grains (Zea mays L. var. Pioneer) Studied by Laser Confocal Microscopy and High-Resolution Mass Spectrometry

Desirable changes in the biochemical composition of food plants is a key outcome of breeding strategies. The subsequent localization of nutritional phytochemicals in plant tissues gives important information regarding the extent of their synthesis across a tissue. We performed a detailed metabolomic analysis of phytochemical substances of grains from Zea mays L. (var. Pioneer) by tandem mass spectrometry and localization by confocal microscopy. We found that anthocyanins are located mainly in the aleurone layer of the grain. High-performance liquid chromatography in combination with ion trap tandem mass spectrometry revealed the presence of 56 compounds, including 30 polyphenols. This method allows for effective and rapid analysis of anthocyanins by plotting their distribution in seeds and grains of different plants. This approach will permit a more efficient screening of phenotypic varieties during food plant breeding.

Accumulation and physicochemical properties of starch in relation to eating quality in different parts of taro (Colocasia esculenta) corm

The accumulation and physicochemical properties of starch affect the eating quality of taro corm. This study aims to investigate the accumulation, morphology, and physicochemical properties of starch from inner and outer tissues in the top, middle, and basal parts of taro corm. Structural and morphological observations showed that the inner tissues of the taro corm accumulated more starch, and the middle tissue had moderate amylose content and the largest granule diameter. Starch from different tissues exhibited A-type orthorhombic structure and similar nuclear magnetic resonance spectrum. The relative crystallinity of starch in the middle tissue was higher than that in the top and basal tissues. Compared with middle and basal tissues, starch from top tissue showed higher peak viscosity, pasting time, swelling power and solubility. Compared with the top and basal tissues, the middle tissue of taro corm exhibited higher index of eating quality including smell, texture, and total evaluation score. The results indicated that starches in various spatial parts of taro corm exhibit differences in accumulation, morphology, structure and physicochemical properties that lead to diverse eating qualities.

Effect of thermal processing on the molecular, structural, and antioxidant characteristics of highland barley β-glucan

This present work evaluated the effect of heat fluidization, microwave roasting and baking treatment of highland barley (HB) on the molecular, structural, thermal and antioxidant characteristics of β-glucan. Fluorescence microscopy results showed that heat fluidization exhibited the greatest disruption effect on endosperm cell walls, resulting in the highest extractability (3.35 ± 0.06 g/100 g flour) and purity (92.67 ± 0.73%) of β-glucan. After HB thermal processing, the molecular weight and polydispersity index of β-glucan were respectively reduced by 3.68%-90.35% and 26.45%-39.83%, and its microscopic molecular morphology transformed from large sphere aggregate to alveolate gel network structure. Meanwhile, the structural elucidation by X-ray diffraction and infrared spectroscopy revealed that thermal processing induced the scission of polymeric chain and formation of lattice-type microgels without changing the primary functional groups of β-glucan. Furthermore, thermogravimetry and antioxidant results indicated the thermal stability and antioxidant activity of β-glucan were enhanced by thermal processing.

Expansion of Internal Hyphal Growth in Fusarium Head Blight-Infected Grains Contributes to the Elevated Mycotoxin Production During the Malting Process

Fusarium head blight (FHB) and the occurrence of mycotoxins is the largest food safety threat to malting and brewing grains. Worldwide surveys of commercial beers have reported that the trichothecene mycotoxin deoxynivalenol (DON) is the most frequent contaminant in beer. Although the DON content of grain generally declines during steeping due to its solubilization, Fusarium spp. can continue to grow and produce DON from steeping through the early kilning stage of malting. DON present on malt is largely extracted into beer. The objective of the current study was to localize the growth of Fusarium spp. within FHB-infected kernels by developing an improved method and to associate fungal growth with the production of DON during malting. FHB-infected barley, wheat, rye, and triticale grains that exhibited large increases in the amount of Fusarium Tri5 DNA and trichothecene mycotoxins following malting were screened for hyphal localization. The growth of fungal hyphae associated with grain and malt was imaged by scanning electron microscopy and confocal laser-scanning microscopy assisted with WGA-Alexa Fluor 488 staining, respectively. In barley, hyphae were present on or within the husk, vascular bundle, and pericarp cavities. Following malting, vast hyphal growth was observed not only in these regions but also in the aleurone layer, endosperm, and embryo. Extensive fungal growth was also observed following malting of wheat, rye, and triticale. However, these grains already had an extensive internal presence of Fusarium hyphae in the unmalted grain, thus representing an enhanced chance of fungal expansion during the malting.[Formula: see text] Copyright © 2021 The Author(s). This is an open access article distributed under the CC BY 4.0 International license.

Multicomponent carbohydrase system from Trichoderma reesei: A toolbox to address complexity of cell walls of plant substrates in animal feed

A diverse range of monocot and dicot grains and their by-products are commonly used in the animal feed industry. They all come with complex and variable cell wall structures which in turn contribute significant fiber to the complete feed. The cell wall is a highly interconnected matrix of various polysaccharides, proteins and lignin and, as such, requires a collaborative effort of different enzymes for its degradation. In this regard, we investigated the potential of a commercial multicomponent carbohydrase product from a wild type fermentation of Trichoderma reesei (T. reesei) (RONOZYME® MultiGrain) in degrading cell wall components of wheat, barley, rye, de-oiled rice bran, sunflower, rapeseed and cassava. A total of thirty-one different enzyme proteins were identified in the T. Reesei carbohydrase product using liquid chromatography with tandem mass spectrometry LC-MS/MS including glycosyl hydrolases and carbohydrate esterases. As measured by in vitro incubations and non-starch polysaccharide component analysis, and visualization by immunocytochemistry and confocal microscopy imaging of immuno-labeled samples with confocal microscopy, the carbohydrase product effectively solubilized cellulolytic and hemicellulolytic polysaccharides present in the cell walls of all the feed ingredients evaluated. The T. reesei fermentation also decreased viscosity of arabinoxylan, xyloglucan, galactomannan and β-glucan substrates. Combination of several debranching enzymes including arabinofuranosidase, xylosidase, α-galactosidase, acetyl xylan esterase, and 4-O-methyl-glucuronoyl methylesterase with both GH10 and GH11 xylanases in the carbohydrase product resulted in effective hydrolyzation of heavily branched glucuronoarabinoxylans. The different β-glucanases (both endo-β-1,3(4)-glucanase and endo-β-1,3-glucanase), cellulases and a β-glucosidase in the T. reesei fermentation effectively reduced polymerization of both β-glucans and cellulose polysaccharides of viscous cereals grains (wheat, barley, rye and oat). Interestingly, the secretome of T. reesei contained significant amounts of an exceptional direct chain-cutting enzyme from the GH74 family (Cel74A, xyloglucan-specific β-1,4-endoglucanase), that strictly cleaves the xyloglucan backbone at the substituted regions. Here, we demonstrated that the balance of enzymes present in the T. reesei secretome is capable of degrading various cell wall components in both monocot and dicot plant raw material used as animal feed.

Magneto-Primed Triticale Seeds Studied by Micro-Raman Spectra

The spectroscopy technique of Micro-Raman is an appropriate method to investigate the microscopic structure of internally heterogeneous (i.e., composed of multiple layers) agro-food products. The effects of applying magnetic fields (magneto-priming technique) and imbibition on the chemical makeup of Triticale seed were studied, particularly in its pericarp, germ and endosperm parts, with the help of Micro-Raman. In light of the results obtained, the magneto-primed seeds soaked in water presented a greater number of chemical compounds than the control seeds, although those treatments were not as effective as the ones with only magneto-priming. The effects of the magneto-priming treatment were especially noticeable in the endosperm due to the large number of chemical compounds identified. The seed composition differences among treatments showed that the use of Micro-Raman jointly with magneto-priming is an appropriate method to obtain and analyse information of the key components of Triticale seeds, notably regarding their pericarp and endosperm.

Xylan Decomposition in Plant Cell Walls as an Inducer of Surfactin Synthesis by Bacillus subtilis

Hemicellulose is the second most abundant plant heterogenous biopolymer. Among products obtained from a wide range of agro-residues, biosurfactants, e.g., surfactin (SU), are gaining increasing interest. Our previous studies have shown that a Bacillus subtilis strain can successfully produce a significant amount of SU using a rapeseed cake. This work aimed to investigate plant hemicellulose components as substrates promoting SU's efficient production by B. subtilis 87Y. Analyses of SU production, enzymatic activity and cell wall composition of hulled oat caryopses suggest that the main ingredients of plant hemicellulose, in particular xylan and its derivatives, may be responsible for an increased biosurfactant yield.

Evaluation of nutrition components in Lanzhou lily bulb by confocal Raman microscopy

Lanzhou lily is a famous lily variety in China, which has many advantages different from other lily varieties. It is rich in nutrients and can be used as medicine or food. The present study is performed to evaluate the quality of Lanzhou lily by Raman spectroscopy. Here, Raman spectra of lily bulbs were collected by confocal Raman microscopy. Through study of a variety of samples, we found that Raman peaks of several important nutrients including starch, sucrose and amino acids were clearly observed from scales of lily bulb, while strong characteristic peaks of ferulic acid were observed at the epidermis of the same scale due to the stimulation of the external environment. We also compared lily bulbs with various sizes and shapes using an average Raman spectrum of selected area. Then, changes of nutrients were quantitively analyzed in different storage period. The results show that the nutrient components including starch, sucrose, amino acids and ferulic acid can be evaluated by Raman spectroscopy. Then the quality of Lanzhou lily can be evaluated by Raman spectroscopy. This is valuable for quality evaluation of lily using non-destructive methods.

Nondestructive Testing for Wheat Quality with Sensor Technology Based on Big Data

Nondestructive testing with sensor technology is one of the fastest growing and most promising wheat quality information analysis technologies. Nondestructive testing with sensor technology benefits from the latest achievement of many disciplines such as computer, optics, mathematics, chemistry, and chemometrics. It has the advantages of simplicity, speed, low cost, no pollution, and no contact. It is widely used in wheat quality analysis and testing research. This article summarizes nondestructive testing with sensor technology for wheat quality, including the mechanical model, hyperspectral technology, Raman spectroscopy, and near-infrared techniques for wheat mechanical properties, storage properties, and physical and chemical properties (such as moisture, ash, protein, and starch) in the past decade. Based on the current research progress, big data technology needs a lot of research in spectral data mining, modeling algorithm optimization, model robustness, etc. to provide more data support and method reference for the research and application of wheat quality.

Effect of thermal treatment on the physicochemical, ultrastructural and nutritional characteristics of whole grain highland barley

Highland barley (HB) was subjected to three thermal treatments (heat fluidization, microwave, and baking) and assessed for physicochemical, ultrastructural and nutritional properties. After thermal treatments, the hardness, bulk density, thousand kernel weight, length/breadth ratio, and color difference decreased significantly, while puffing index increased. Meanwhile, the formation of fissure was observed in the appearance. Microstructure images illustrated that numerous micropores were evenly distributed in the endosperm structure, and aleurone layer cells were deformed by compression. Furthermore, a dramatically disruption of endosperm cell walls and slightly deformation of outer layers were observed by confocal laser scanning microscopy. Moreover, a notably decrease in total phenolics (14.02%-36.91%), total flavonoids (25.28%-44.94%), and bound phenolics (8.99%-27.53%) was detected, while free phenolics (8.81%-43.40%), β-glucan extractability (4.71%-43.66%), antioxidant activity (71.87%-349.77%), and reducing power (3.05%-56.13%) increased significantly. Greatest increase in nutritional values was caused by heat fluidization, which possessed the potential for development of ready-to-eat functional foods.

Comprehensive comparison and applications of different sections in investigating the microstructure and histochemistry of cereal kernels

This review summarizes the main applications of different sections and some improved sectioning methods in investigating the microstructure and histochemistry of cereal kernels. Thick sections of developing kernels prepared by free-hand and sliding microtome-aided sectioning method can be employed to elucidate tissue anatomy and histochemistry. The thin sections of mature kernels prepared by ultramicrotome-aided sectioning method can exhibit the micromorphology of starch granules when stained with iodine solution. The paraffin sections of developing kernels can exhibit the tissue anatomy of kernel, the accumulation of storage substances, and the location of protein and gene transcripts with immunohistochemistry and in situ hybridization techniques. The semithin resin sections can clearly exhibit the morphology of cells, starch granules, and protein bodies in kernel, but the sections prepared with different resins have various advantages and disadvantages for research investigating the morphology and histochemistry of cereal kernels. The improved methods of free-hand sectioning and ultramicrotome-aided sectioning of mature kernels are suitable for investigating the morphology of starch granules in a large number of samples in a short time. The modified method for preparing resin sections of whole kernels can be employed to determine the morphology and distribution of cells, starch granules, and storage protein in mature, developing, germinated, and cooked kernels in situ. This review could help researchers choose appropriate sections for investigating the microstructure and histochemistry of cereal kernels according to their study objectives.

An image processing method for investigating the morphology of cereal endosperm cells

In cereal seeds, the number, morphology and development of endosperm cells are closely related to grain quality, weight and yield. Endosperm cells differ morphologically in different regions of the seed. Nevertheless, it is important to be able to analyze the morphology of cereal endosperm cells. We established an image processing method to enhance the outlines of endosperm cells. The endosperm cell wall was traced precisely using the "pen tool" in Photoshop software (PS). The tracing was defined as the "work path" and was highlighted using the PS "brush tool." Images of mature rice, maize and wheat endosperm sections stained with different methods were analyzed using this method. Combined with the whole sections of mature and developing cereal kernels, the processed image exhibited clearly the morphology of endosperm cells in any region of endosperm and at any stage of endosperm development. The processed image was more accurate and efficient for analyzing morphological characteristics than the unprocessed image.

In situ chemically specific mapping of agrochemical seed coatings using stimulated Raman scattering microscopy

Providing sufficient, healthy food for the increasing global population is putting a great deal of pressure on the agrochemical industry to maximize crop yields without sustaining environmental damage. The growth and yield of every plant with sexual reproduction, depends on germination and emergence of sown seeds, which is affected greatly by seed disease. This can be most effectively controlled by treating seeds with pesticides before they are sown. An effective seed coating treatment requires a high surface coverage and adhesion of active ingredients onto the seed surface and the addition of adhesive agents in coating formulations plays a key role in achieving this. Although adhesive agents are known to enhance seed germination, little is understood about how they affect surface distribution of actives and how formulations can be manipulated to rationally engineer seed coating preparations with optimized coverage and efficacy. We show, for the first time, that stimulated Raman scattering microscopy can be used to map the seed surface with microscopic spatial resolution and with chemical specificity to identify formulation components distributed on the seed surface. This represents a major advance in our capability to rationally engineer seed coating formulations with enhanced efficacy.

A simple and rapid method for preparing the whole section of starchy seed to investigate the morphology and distribution of starch in different regions of seed

BACKGROUND

Storage starch in starchy seed influences the seed weight and texture, and determines its applications in food and nonfood industries. Starch granules from different plant sources have significantly different shapes and sizes, and even more the difference exists in the different regions of the same tissue. Therefore, it is very important to in situ investigate the morphology and distribution of starch in the whole seed. However, a simple and rapid method is deficient to prepare the whole section of starchy seed for investigating the morphology and distribution of starch in the whole seeds for a large number of samples.

RESULTS

A simple and rapid method was established to prepare the whole section of starchy seed, especially for floury seed, in this study. The whole seeds of translucent and chalky rice, vitreous and floury maize, and normal barley and wheat were sectioned successfully using the newly established method. The iodine-stained section clearly exhibited the shapes and size of starch granules in different regions of seed. The starch granules with different morphologies and iodine-staining colors existed regionally in the seeds of high-amylose rice and maize. The sections of lotus and kidney bean seeds also showed the feasibility of this method for starchy non-cereal seeds.

CONCLUSION

The simple and rapid method was proven effective for preparing the whole sections of starchy seeds. The whole section of seed could be used to investigate the morphology and distribution of starch granules in different regions of the whole seed. The method was especially suitable for large sample numbers to investigate the starch morphology in short time.

A Genome Wide Association Study of arabinoxylan content in 2-row spring barley grain

In barley endosperm arabinoxylan (AX) is the second most abundant cell wall polysaccharide and in wheat it is the most abundant polysaccharide in the starchy endosperm walls of the grain. AX is one of the main contributors to grain dietary fibre content providing several health benefits including cholesterol and glucose lowering effects, and antioxidant activities. Due to its complex structural features, AX might also affect the downstream applications of barley grain in malting and brewing. Using a high pressure liquid chromatography (HPLC) method we quantified AX amounts in mature grain in 128 spring 2-row barley accessions. Amounts ranged from ~ 5.2 μg/g to ~ 9 μg/g. We used this data for a Genome Wide Association Study (GWAS) that revealed three significant quantitative trait loci (QTL) associated with grain AX levels which passed a false discovery threshold (FDR) and are located on two of the seven barley chromosomes. Regions underlying the QTLs were scanned for genes likely to be involved in AX biosynthesis or turnover, and strong candidates, including glycosyltransferases from the GT43 and GT61 families and glycoside hydrolases from the GH10 family, were identified. Phylogenetic trees of selected gene families were built based on protein translations and were used to examine the relationship of the barley candidate genes to those in other species. Our data reaffirms the roles of existing genes thought to contribute to AX content, and identifies novel QTL (and candidate genes associated with them) potentially influencing the AX content of barley grain. One potential outcome of this work is the deployment of highly associated single nucleotide polymorphisms markers in breeding programs to guide the modification of AX abundance in barley grain.

History of adaptation determines short-term shifts in performance and community structure of hydrogen-producing microbial communities degrading wheat straw

This study addresses the question of ecological interest for the determination of structure and diversity of microbial communities that degrade lignocellulosic biomasses to produce biofuels. Two microbial consortia with different history, native of wheat straw (NWS) and from a methanogenic digester (MD) fed with cow manure, were contrasted in terms of hydrogen performance, substrate disintegration and microbial diversity. NWS outperformed the hydrogen production rate of MD. Microscopic images revealed that NWS acted on the cuticle and epidermis, generating cellulose strands with high crystallinity, while MD degraded deeper layers, equally affecting all polysaccharides. The bacterial composition markedly differed according to the inocula origin. NWS almost solely comprised hydrogen producers of the phyla Firmicutes and Proteobacteria, with 38% members of Enterococcus. After hydrogen fermentation, NWS comprised 8% Syntrophococcus, an acetogen that cleaves aryl ethers of constituent groups on the aromatic components of lignin. Conversely, MD comprised thirteen phyla, primarily including Firmicutes with H₂‐producing members, and Bacteroidetes with non‐H₂‐producing members, which reduced the hydrogen performance. Overall, the results of this study provide clear evidence that the history of adaptation of NWS enhanced the hydrogen performance from untreated wheat straw. Further, native wheat straw communities have the potential to refine cellulose fibers and produce biofuels simultaneously.

Preparation and characterization of glycoprotein-resistant starch complex as a coating material for oral bioadhesive microparticles for colon-targeted polypeptide delivery

For effective oral delivery of polypeptide or protein and enhancement their oral bioavailability, a new resistant starch-glycoprotein complex bioadhesive carrier and an oral colon-targeted bioadhesive delivery microparticle system were developed. A glycoprotein, concanavalin A (Con A), was successfully conjugated to the molecules of resistant starch acetate (RSA), leading to the formation of resistant starch-glycoprotein complex. This Con A-conjugated RSA film as a coating material showed an excellent controlled-release property. In streptozotocin (STZ)-induced type II diabetic rats, the insulin-loaded microparticles coated with this Con A-conjugated RSA film exhibited good hypoglycemic response for keeping the plasma glucose level within the normal range for totally 44-52 h after oral administration with different insulin dosages. Oral glucose tolerance tests indicated that successive oral administration of these colon-targeted bioadhesive microparticles with insulin at a level of 50 IU/kg could achieve a hypoglycemic effect similar to that by injection of insulin at 35 IU/kg. Therefore, the potential of this new Con A-conjugated RSA film-coated microparticle system has been demonstrated to be capable of improving the oral bioavailability of bioactive proteins and peptides.

Dispersive and FT-Raman spectroscopic methods in food analysis

Raman spectroscopy is a powerful technique for molecular analysis of food samples.

Evolution and development of cell walls in cereal grains

The composition of cell walls in cereal grains and other grass species differs markedly from walls in seeds of other plants. In the maternal tissues that surround the embryo and endosperm of the grain, walls contain higher levels of cellulose and in many cases are heavily lignified. This may be contrasted with walls of the endosperm, where the amount of cellulose is relatively low, and the walls are generally not lignified. The low cellulose and lignin contents are possible because the walls of the endosperm perform no load-bearing function in the mature grain and indeed the low levels of these relatively intractable wall components are necessary because they allow rapid degradation of the walls following germination of the grain. The major non-cellulosic components of endosperm walls are usually heteroxylans and (1,3;1,4)-β-glucans, with lower levels of xyloglucans, glucomannans, and pectic polysaccharides. Pectic polysaccharides and xyloglucans are the major non-cellulosic wall constituents in most dicot species, in which (1,3;1,4)-β-glucans are usually absent and heteroxylans are found at relatively low levels. Thus, the "core" non-cellulosic wall polysaccharides in grain of the cereals and other grasses are the heteroxylans and, more specifically, arabinoxylans. The (1,3;1,4)-β-glucans appear in the endosperm of some grass species but are essentially absent from others; they may constitute from zero to more than 45% of the cell walls of the endosperm, depending on the species. It is clear that in some cases these (1,3;1,4)-β-glucans function as a major store of metabolizable glucose in the grain. Cereal grains and their constituent cell wall polysaccharides are centrally important as a source of dietary fiber in human societies and breeders have started to select for high levels of non-cellulosic wall polysaccharides in grain. To meet end-user requirements, it is important that we understand cell wall biology in the grain both during development and following germination.