Cetylpyridinium chloride chitosan blended mucoadhesive buccal films for treatment of pediatric oral diseases

Oral Films Printed with Green Propolis Ethanolic Extract

Oral film (OF) research has intensified due to the effortless administration and advantages related to absorption in systemic circulation. Chitosan is one of the polymers widely used in the production of OFs; however, studies evaluating the maintenance of the active principles' activity are incipient. Propolis has been widely used as an active compound due to its different actions. Printing techniques to incorporate propolis in OFs prove to be efficient. The objective of the present study is to develop and characterize oral films based on chitosan and propolis using printing techniques and to evaluate the main activities of the extract incorporated into the polymeric matrix. The OFs were characterized in relation to the structure using scanning and atomic force electron microscopy; the mechanical properties, disintegration time, wettability, and stability of antioxidant activity were evaluated. The ethanolic extract of green propolis (GPEE) concentration influenced the properties of the OFs. The stability (phenolic compounds and antioxidant activity) was reduced in the first 20 days, and after this period, it remained constant.

Development and In Vitro Evaluation of Aceclofenac Buccal Film

AIM

This study aimed to formulate and characterize aceclofenac buccal film formulations made of different polymers and evaluate the effects of polymer type on buccal film properties.

MATERIALS AND METHODS

Five polymer types, namely hydroxypropyl methylcellulose (HPMC), sodium carboxymethylcellulose (SCMC), polyvinyl alcohol (PVA), Eudragit S100, and Eudragit SR100, were used to prepare aceclofenac buccal film formulation either separately or combined by solvent-casting method. These formulations were evaluated in terms of physical appearance, folding test, film weight and thickness, drug content, percentage of elongation, moisture uptake, water vapor permeability, and in vitro drug release.

RESULTS

The addition of Eudragit polymer in most of the produced buccal films was unacceptable with low folding endurance. However, the dissolution profile of buccal films made from PVA and Eudragit SR100 provided a controlled drug release profile.

CONCLUSION

Buccal films can be formulated using different polymers either individually or in combination to obtain the drug release profile required to achieve a desired treatment goal. Furthermore, the property of the buccal films depends on the type and concentration of the polymer used.

Current Drug Delivery Strategies for Buccal Cavity Ailments using Mouth Dissolving Wafer Technology: A Comprehensive Review on the Present State of the Art

BACKGROUND

Mouth-dissolving wafer is polymer-based matrice that incorporates various pharmaceutical agents for oral drug delivery. This polymeric wafer is ingenious in the way that it needs not be administered with water, like in conventional tablet dosage form. It has better compliance among the pediatric and geriatric groups owing to its ease of administration.

OBJECTIVE

The polymeric wafer dissolves quickly in the oral cavity and is highly effective for a targeted local effect in buccal-specific ailments. It is a safe, effective, and versatile drug delivery carrier for a range of drugs used to treat a plethora of oral cavity-specific ailments that inflict common people, like thrush, canker sores, periodontal disease, benign oral cavity tumors, buccal neoplasm, and malignancies. This review paper focuses thoroughly on the present state of the art in mouth-dissolving wafer technology for buccal drug delivery and targeting. Moreover, we have also addressed present-time limitations associated with wafer technology to aid researchers in future developments in the arena of buccal drug delivery.

CONCLUSION

This dynamic novel formulation has tremendous future implications for designing drug delivery systems to target pernicious ailments and diseases specific to the buccal mucosa. In a nutshell, this review paper aims to summarize the present state of the art in buccal targeted drug delivery.

Synthesis of films based on chitosan and protic ionic liquids to be used as wound dressing on the oral mucosa

Oral mucosal ulcerations expose connective tissue to different pathogens and this can progress to systemic infection. This study aimed to synthesize environmentally-friendly films with chitosan and protic ionic liquids, possessing mucoadhesive properties, activity against opportunistic microorganisms, enhanced malleability and mechanical resistance to be used as a wound dressing on the oral mucosa. Therefore, films with chitosan and 10, 35, and 50 % (wt/wt) of 2-hydroxy diethylammonium lactate, salicylate, and maleate protic ionic liquids were synthesized. Thickness measurements and mechanical properties analysis were performed. In addition, oral mucoadhesion, antimicrobial activity, and cytotoxicity properties were investigated. Results showed that the addition of 35wt% and 50wt% of all kinds of protic ionic liquids tested presented significant improvements in film thickness and mechanical properties. Films based on chitosan and the protic ionic liquid 2-hydroxy diethylammonium salicylate at percentages of 35 and 50wt% exhibited superior mucoadhesive properties, antimicrobial activity on opportunistic microorganisms and an improvement in their flexibility after immersion in synthetic saliva. Cytotoxicity results suggest that all kinds of chitosan/protic ionic liquids films tested are safe for intra-oral use. Therefore, the results of this study indicate that these materials could be good candidates for efficient and environmentally-friendly wound dressing films on the oral mucosa.

Towards Formulation of Highly Acidic Active Ingredients: Development of Clinically Effective Concentrated Trichloroacetic Acid Gel for Wart Management

Common warts are benign skin lesions caused by the human papillomavirus. Although they are usually not harmful, they can cause pain, depending on their location. While many modalities are available for treatment of warts, none is a gold standard, and many are not affordable and/or have suboptimal outcomes. Trichloroacetic acid (TCA) is a chemical tissue-destroying agent used as a highly concentrated solution for wart management. While available and efficient, it is difficult to handle as the solution spreads to tissue surrounding the wart causing pain and burning. Hence, we developed a new polymer-based gel of high TCA content (100% w/v). Gels were formed successfully as hydroxyethyl cellulose (HEC) and chitosan were used to impart viscosity and bioadhesion. Formulae of different concentrations were tested for their physical properties, and the optimal formulation was selected for clinical evaluation. A combination of 3% HEC and 2% chitosan provided optimal viscosity and limited water content and have acceptable stability. The efficacy and safety of the biweekly application of TCA gel were evaluated in 30 patients. The clinical study revealed gel's efficacy and tolerability; half of the patients showed a complete cure, and 90% showed improvement within 6 weeks. Only 10-12% of the patients reported side effects. In summary, transforming TCA solution into a gel enabled its application and handling in a practical manner by physicians and patients alike, while maintaining its efficacy as a tissue-destroying agent. Moreover, it is economic and easy to apply, rendering it a promising formulation for similar conditions requiring controlled tissue ablation.

Technological Aspects and Evaluation Methods for Polymer Matrices as Dental Drug Carriers

The development of polymer matrices as dental drug carriers takes into account the following technological aspects of the developed formulations: the composition and the technology used to manufacture them, which affect the properties of the carriers, as well as the testing methods for assessing their behavior at application sites. The first part of this paper characterizes the methods for fabricating dental drug carriers, i.e., the solvent-casting method (SCM), lyophilization method (LM), electrospinning (ES) and 3D printing (3DP), describing the selection of technological parameters and pointing out both the advantages of using the mentioned methods and their limitations. The second part of this paper describes testing methods to study the formulation properties, including their physical and chemical, pharmaceutical, biological and in vivo evaluation. Comprehensive in vitro evaluation of carrier properties permits optimization of formulation parameters to achieve prolonged retention time in the dynamic oral environment and is essential for explaining carrier behavior during clinical evaluation, consequently enabling the selection of the optimal formulation for oral application.

The Antibacterial and Antifungal Capacity of Eight Commercially Available Types of Mouthwash against Oral Microorganisms: An In Vitro Study

This work aimed to evaluate and compare the antimicrobial actions and effects over time of eight types of mouthwash, based on the impact of chlorhexidine on the main microorganisms that are responsible for oral diseases: Enterococcus faecalis, Pseudomonas aeruginosa, and Candida albicans. The mouthwashes’ antimicrobial action was determined in terms of their minimum inhibitory concentration (MIC), minimum bactericidal/fungicidal concentration (MBC/MFC), and time-kill curves at different contact times (10 s, 30 s, 60 s, 5 min, 15 min, 30 min, and 60 min), against selected oral microorganisms. All the mouthwashes showed a notable effect against C. albicans (MICs ranging from 0.02% to 0.09%), and higher MIC values were recorded with P. aeruginosa (1.56% to >50%). In general, the mouthwashes showed similar antimicrobial effects at reduced contact times (10, 30, and 60 s) against all the tested microorganisms, except with P. aeruginosa, for which the most significant effect was observed with a long time (15, 30, and 60 min). The results demonstrate significant differences in the antimicrobial actions of the tested mouthwashes, although all contained chlorhexidine and most of them also contained cetylpyridinium chloride. The relevant antimicrobial effects of all the tested mouthwashes, and those with the best higher antimicrobial action, were recorded by A—GUM® PAROEX®A and B—GUM® PAROEX®, considering their effects against the resistant microorganisms and their MIC values.

Assessment of Binary Agarose-Carbopol Buccal Gels for Mucoadhesive Drug Delivery: Ex Vivo and In Vivo Characterization

Agarose (AG) is a naturally occurring biocompatible marine seaweed extract that is converted to hydrocolloid gel in hot water with notable gel strength. Currently, its mucoadhesion properties have not been fully explored. Therefore, the main aim of this study was to evaluate the mucoadhesive potential of AG binary dispersions in combination with Carbopol 934P (CP) as mucoadhesive gel preparations. The gels fabricated via homogenization were evaluated for ex vivo mucoadhesion, swelling index (SI), dissolution and stability studies. The mucoadhesive properties of AG were concentration dependent and it was improved by the addition of CP. Maximum mucoadhesive strength (MS) (27.03 g), mucoadhesive flow time (FT) (192.2 min), mucoadhesive time in volunteers (MT) (203.2 min) and SI (23.6% at 4 h) were observed with formulation F9. The mucoadhesive time investigated in volunteers (MT) was influenced by AG concentration and was greater than corresponding FT values. Formulations containing 0.3%, w/v AG (F3 and F9) were able to sustain the release (~99%) for both drugs till 3 h. The optimized formulation (F9) did not evoke any inflammation, irritation or pain in the buccal cavity of healthy volunteers and was also stable up to 6 months. Therefore, AG could be considered a natural and potential polymer with profound mucoadhesive properties to deliver drugs through the mucosal route.

Exploiting Polymeric Films as a Multipurpose Drug Delivery System: a Review

Polymeric films are drug delivery systems that maintain contact with the delivery tissue and sustain a controlled release of therapeutic molecules. These systems allow a longer time of drug contact with the target site in the case of topical treatments and allow the controlled administration of drugs. They can be manufactured by various methods such as solvent casting, hot melt extrusion, electrospinning, and 3D bioprinting. Furthermore, they can employ various polymers, for example PVP, PVA, cellulose derivatives, chitosan, gelling gum, pectin, and alginate. Its versatility is also applicable to different routes of administration, as it can be administered to the skin, oral mucosa, vaginal canal, and eyeballs. All these factors allow numerous combinations to obtain a better treatment. This review focuses on exploring some possible ways to develop them and some particularities and advantages/disadvantages in each case. It also aims to show the versatility of these systems and the advantages and disadvantages in each case, as they bring the opportunity to develop different medicines to facilitate therapies for the most diverse purposes .

The Development of Eletriptan Hydrobromide Immediate Release Buccal Films Using Central Composite Rotatable Design: An In Vivo and In Vitro Approach

The objective is to develop immediate release buccal films of Eletriptan Hydrobromide (EHBR) using hydroxypropyl methylcellulose (HPMC) E5. The buccal films have the ability to disintegrate rapidly and provide both systemic and local effects. The solvent casting method was employed to prepare the films and the central composite rotatable design (CCRD) model was used for film optimization. All the formulated films were characterized for physicochemical evaluation (Fourier transform infrared spectroscopy (FTIR), X-ray Diffraction (XRD), differential scanning calorimetry (DSC), and Scanning electron microscopy (SEM), in in-vitro, ex-vivo, and in-vivo drug release. The fabricated films were transparent, colorless, and evenly distributed. The FTIR spectra showed no chemical interaction between the drug and excipients. In in-vitro analysis, the film has the highest% drug release (102.61 ± 1.13), while a maximum of 92.87 ± 0.87% drug was diffused across the cellulose membrane having a pore size of 0.45 µm. In the ex-vivo study, drug diffusion across the goat mucosa was performed and 80.9% of the drug was released in 30 min. In-vivo results depict a mean half-life (t½) of 4.54 ± 0.18 h and a Cmax of 128 ± 0.87 (ng/mL); Tmax was achieved in 1 h. Furthermore, instability and histopathological studies buccal films were proven to be safe and act as an effective dosage form. In a nutshell, optimized and safe instant release EHBR buccal films were prepared that have the tendency to provide effect effectively.

Fabrication and Characterization of Buccal Film Loaded Self-emulsifying Drug Delivery System containing Lysiphyllum strychnifolium Stem Extracts

Lysiphyllum strychnifolium has long been used as a popular herbal medicinal plant for treating fever and alcohol intoxication. This study aimed to prepare buccal film for L. strychnifolium stem extracts. These extracts were less soluble in water and were therefore loaded in self-emulsifying systems before being mixed into the film. Astilbin was selected as a chemical marker in L. strychnifolium stem extracts. Firstly, the L. strychnifolium stem extracts were entrapped in the self-emulsifying systems which were designed and optimized based on 3² factorial design. The optimal formulation was 0.60 g of surfactant-co-surfactant mixture (Tween^® 80 and polyethylene glycol 400 in the ratio of 7.5:1) and 0.40 g of caprylic/capric triglyceride. Secondly, the optimal self-emulsifying system was loaded in the polymeric film which consisted of polyvinyl alcohol blended with poloxamer 407 using glycerin as a plasticizer. The properties of the prepared buccal film were unchanged, and the film showed an amorphous state, indicating all ingredients might be completely dissolved in the film. The buccal film could be placed in direct contact with the mouth without oral mucosal irritation, and showed a smooth and homogeneous surface with a rough and compact cross-sectional morphology. Astilbin content in the buccal film was 61.39 ± 11.45 µg/cm². Astilbin was released from the buccal film while the permeation rate was low. The release mechanism was both swelling and diffusion, and followed anomalous or non-Fickian transfer. The permeability coefficient of the cumulative amount of astilbin permeated from buccal film was 1.0192 ± 0.1395 ×10^-3 cm/h. Thus, the buccal film can be prepared by using a self-emulsifying system for herbal applications and shows potential as a safe and convenient form of oral drug administration.

Multiple Roles of Chitosan in Mucosal Drug Delivery: An Updated Review

Chitosan (CS) is a linear polysaccharide obtained by the deacetylation of chitin, which, after cellulose, is the second biopolymer most abundant in nature, being the primary component of the exoskeleton of crustaceans and insects. Since joining the pharmaceutical field, in the early 1990s, CS attracted great interest, which has constantly increased over the years, due to its several beneficial and favorable features, including large availability, biocompatibility, biodegradability, non-toxicity, simplicity of chemical modifications, mucoadhesion and permeation enhancer power, joined to its capability of forming films, hydrogels and micro- and nanoparticles. Moreover, its cationic character, which renders it unique among biodegradable polymers, is responsible for the ability of CS to strongly interact with different types of molecules and for its intrinsic antimicrobial, anti-inflammatory and hemostatic activities. However, its pH-dependent solubility and susceptibility to ions presence may represent serious drawbacks and require suitable strategies to be overcome. Presently, CS and its derivatives are widely investigated for a great variety of pharmaceutical applications, particularly in drug delivery. Among the alternative routes to overcome the problems related to the classic oral drug administration, the mucosal route is becoming the favorite non-invasive delivery pathway. This review aims to provide an updated overview of the applications of CS and its derivatives in novel formulations intended for different methods of mucosal drug delivery.

Development of an Insulin Nano-Delivery System through Buccal Administration

AIM

To develop a new nano-delivery system for insulin buccal administration.

BACKGROUND

Biodegradable polymeric nanoparticles (PNPs) had viewed countless breakthroughs in drug delivery systems. The main objective of PNPs application in delivering and carrying different promising drugs is to make sure that the drugs being delivered to their action sites. As a result maximizing the desired effect and overcoming their limitations and drawbacks.

OBJECTIVES

The main goals of this study were to produce an insulin consumable nano-delivery system for buccal administration and enhance the mucoadhesive effect in sustaining insulin release.

METHODS

Water in oil in water (W-O-W) microemulsion solvent evaporation technique was used for the preparation of nanoparticles consisting from positively charged poly (D, L-lactide-co-glycolide) coated with chitosan and loaded with insulin. Later, a consumable buccal film was prepared by the spin coating method and loaded with the previously prepared nanoparticles.

RESULTS

The newly prepared nanoparticle was assessed in terms of size, charge and surface morphology using a Scanning Electron Microscope (SEM), zeta potential, Atomic Force Microscope (AFM), and Fourier Transform Infra-red (FTIR) spectroscopy. An in-vitro investigation of the insulin release, from nanoparticles and buccal film, demonstrated controlled as well as sustained delivery over 6 hrs. The cumulative insulin release decreased to about (28.9%) with buccal film in comparing with the nanoparticle (50 %).

CONCLUSION

The buccal film added another barrier for insulin release. Therefore, the release was sustained.

The Expanded Role of Chitosan in Localized Antimicrobial Therapy

Chitosan is one of the most studied natural origin polymers for biomedical applications. This review focuses on the potential of chitosan in localized antimicrobial therapy to address the challenges of current rising antimicrobial resistance. Due to its mucoadhesiveness, chitosan offers the opportunity to prolong the formulation residence time at mucosal sites; its wound healing properties open possibilities to utilize chitosan as wound dressings with multitargeted activities and more. We provide an unbiased overview of the state-of-the-art chitosan-based delivery systems categorized by the administration site, addressing the site-related challenges and evaluating the representative formulations. Specifically, we offer an in-depth analysis of the current challenges of the chitosan-based novel delivery systems for skin and vaginal infections, including its formulations optimizations and limitations. A brief overview of chitosan's potential in treating ocular, buccal and dental, and nasal infections is included. We close the review with remarks on toxicity issues and remaining challenges and perspectives.

Antimicrobial and cytotoxic capacity of pyroligneous extracts films of Eucalyptus grandis and chitosan for oral applications

Chitosan films containing distilled pyroligneous extracts of Eucalyptus grandis (DPEC), characterized and developed by Brazilian Agricultural Research Corporation-Embrapa Temperate Agriculture (EMBRAPA-CPACT), were evaluated for antimicrobial activity against Candida albicans, Streptococcus mutans, and Lactobacillus acidophilus by direct contact test. Further, their capacity for the prevention of teeth enamel demineralization and cytotoxicity in vitro were also determined. The natural polymers were tested at different concentrations (1500-7500 µg mL-1) and the formulation of an experimental fluoride varnish with antimicrobial activity was evaluated by direct contact test, whereas cytotoxicity was analyzed through the colorimetric MTT assay. Preliminary data showed no statistically significant differences in cytotoxicity to NIH/3T3 cell line when DPEC is compared to the control group. On the other hand, the antimicrobial capacity and demineralization effects were found between the test groups at the different concentrations tested. Chitosan films containing distilled pyroligneous extracts of E. grandis may be an effective control strategy to prevent biofilm formation related to dental caries when applied as a protective varnish. They may inhibit the colonization of oral microorganisms and possibly control dental caries through a decrease in pH and impairment of enamel demineralization.

Preparation of Carbopol 934 Based Ketorolac Tromethamine Buccal Mucoadhesive Film: In Vitro, Ex Vivo, and In Vivo Assessments

The goal of present investigation was to formulate and evaluate ketorolac tromethamine (KTM) mucoadhesive buccal films. The films were prepared by solvent evaporation method using PVP K30, HPMC K4M, HPMC K15M, carbopol 934, chitosan, and sodium alginate as polymers and propylene glycol as plasticizer. The films were evaluated for thickness, weight variation, folding endurance, surface pH, swelling index, in vitro residence time, in vitro diffusion, release kinetics, ex vivo permeation, in vitro-ex vivo correlation, and in vivo pharmacological activities such as anti-inflammatory and analgesic activity. Thickness, weight, drug content, and folding endurance were found to be uniform for the films. Surface pH was $6.85\pm 0.10$ , and swelling index was the highest ( $27.27\pm 0.37$ ) for the best film containing carbopol 934 along with sodium alginate and PVP K 30 (formulation code F2). In vitro residence time was greater than 5 h, and in vitro % drug release was 98.71% for F2. It exhibited 55.49% of swelling inhibition at 5 h, and above 38.88% was maintained at even 8 h. The film F2 has shown maximum analgesic response of 17 sec at 5 h, and the response of 11 sec was maintained at even 8 h. The anti-inflammatory and analgesic effect of F2 was found be maximum while sustaining the effect for prolonged period when compared to free drug solution. Thus, KTM mucoadhesive buccal film containing carbopol 934, sodium alginate, and PVP K30 could be an effective alternative for conventional therapy with improved efficacy.

Applying design of experiments (DoE) on the properties of buccal film for nicotine delivery

Design of experiments is used to optimize ratios between deproteinized natural rubber latex, Eudragit® NM 30 D, and pectin for nicotine buccal film with dependent variables as moisture content, moisture uptake, and swelling index in simulated saliva 3 and 5 h. Mathematical models were linear for moisture content and moisture uptake, while swelling index in simulated saliva 3 and 5 h was a quadratic model. Optimized polymer ratio was 0.319:0.362:0.319, respectively. Experimental values were 13.17 ± 0.92%, 3.96 ± 0.84%, 112.58 ± 22.63%, and 124.69 ± 8.01% for dependent variables, respectively. The buccal film showed high swelling at pH 7 and swelling–deswelling behaviors in a water/ethanol environment. The surface pH, weight, and thickness were 8.11, 63.28 ± 6.18 mg, and 219.87 ± 44.28 µm, respectively. Nicotine content was found as 10.22 ± 0.46 mg/4 cm2. Maximum cumulative nicotine release was 9.82 ± 0.94 mg/4 cm2. Kinetic model fitted to the Korsmeyer-Peppas model and release exponent was 0.36, representing that release mechanism was controlled by Fickian diffusion release.

Recent advances of oral film as platform for drug delivery

Orally drug delivery film has received extensive interest duo to a distinct set of its advantageous properties compared to the traditional orally administered dosages, including faster rate of drug absorption, higher bioavailability and better patient compliance for children and elders with swallowing deficiencies. In particular, its potential capacity of delivering proteins and peptides has further attracted great attention. Lately, tremendous advances have been made in designing and developing both novel mucoadhesive films and orodispersible films to fulfill specific accomplishments of drug delivery. This review aims to summarize those newly developed oral films, discussing their formulation strategies, manufacturing methods as well as advantages and limitations thereof. Conclusions and future perspectives are also provided in brief.

Polysaccharide-Based Drug Delivery Systems for the Treatment of Periodontitis

Periodontal diseases are worldwide health problems that negatively affect the lifestyle of many people. The long-term effect of the classical treatments, including the mechanical removal of bacterial plaque, is not effective enough, causing the scientific world to find other alternatives. Polymer-drug systems, which have different forms of presentation, chosen depending on the nature of the disease, the mode of administration, the type of polymer used, etc., have become very promising. Hydrogels, for example (in the form of films, micro-/nanoparticles, implants, inserts, etc.), contain the drug included, encapsulated, or adsorbed on the surface. Biologically active compounds can also be associated directly with the polymer chains by covalent or ionic binding (polymer-drug conjugates). Not just any polymer can be used as a support for drug combination due to the constraints imposed by the fact that the system works inside the body. Biopolymers, especially polysaccharides and their derivatives and to a lesser extent proteins, are preferred for this purpose. This paper aims to review in detail the biopolymer-drug systems that have emerged in the last decade as alternatives to the classical treatment of periodontal disease.

Antibacterial and Antiviral Functional Materials: Chemistry and Biological Activity toward Tackling COVID-19-like Pandemics

The ongoing worldwide pandemic due to COVID-19 has created awareness toward ensuring best practices to avoid the spread of microorganisms. In this regard, the research on creating a surface which destroys or inhibits the adherence of microbial/viral entities has gained renewed interest. Although many research reports are available on the antibacterial materials or coatings, there is a relatively small amount of data available on the use of antiviral materials. However, with more research geared toward this area, new information is being added to the literature every day. The combination of antibacterial and antiviral chemical entities represents a potentially path-breaking intervention to mitigate the spread of disease-causing agents. In this review, we have surveyed antibacterial and antiviral materials of various classes such as small-molecule organics, synthetic and biodegradable polymers, silver, TiO2, and copper-derived chemicals. The surface protection mechanisms of the materials against the pathogen colonies are discussed in detail, which highlights the key differences that could determine the parameters that would govern the future development of advanced antibacterial and antiviral materials and surfaces.

Poloxamer-188 and d-α-Tocopheryl Polyethylene Glycol Succinate (TPGS-1000) Mixed Micelles Integrated Orodispersible Sublingual Films to Improve Oral Bioavailability of Ebastine; In Vitro and In Vivo Characterization

Orodispersible sublingual films (OSFs) composed of hydrophilic polymers were loaded with poloxamer-188 and d-α-tocopheryl polyethylene glycol succinate (TPGS-1000) mixed micelles to improve the oral bioavailability of a poorly soluble drug, ebastine (EBT). Mixed micelles formed by thin-film hydration method were incorporated into orodispersible sublingual film, consisting of HPMC and glycerol, using solvent casting technique. The mixed micelles and films were thoroughly evaluated for physicochemical characterization (size, polydispersity index, zeta potential, entrapment efficiency, thickness, weight, surface pH studies, disintegration time, swelling indices, mechanical properties, FTIR, PXRD, DSC, SEM, AFM, in vitro drug release, in vivo bioavailability, and toxicological studies). The results showed that the average particle size of mixed micelles was 73 nm. The mean zeta potential and PDI of the optimal mixed micelles formulation were -26 mV and 0.16, respectively. Furthermore, the maximum entrapment efficiency 82% was attained. The film's disintegration time was in the range of 28 to 102 s in aqueous media. The integrity of micelles was not affected upon incorporation in films. Importantly, the micelles-loaded films revealed rapid absorption, high permeability, and increased bioavailability of EBT as compared to the pure drug. The existence of ebastine loaded mixed micelles in the films enhanced the bioavailability about 2.18 folds as compared to pure drug. Further, the results evidently established in-vitro and in-vivo performance of bioavailability enhancement, biocompatibility, and good safety profile of micelles-loaded orodispersible EBT films. Finally, it was concluded that film loaded with poloxamer-188/TPGS-1000 mixed micelles could be an effective carrier system for enhancing the bioavailability of ebastine.