Synthesis and characterization of nitrogen-doped carbon dots as fluorescent nanoprobes with antimicrobial properties and skin permeability

Superoxide Dismutase-Mimetic Polyphenol-Based Carbon Dots for Multimodal Bioimaging and Treatment of Atopic Dermatitis

Polyphenols have been investigated for their potential to mitigate inflammation in the context of atopic dermatitis (AD). In this study, epigallocatechin-3-gallate (EGCG)-based carbon dots (EGCG@CDs) were developed to enhance transdermal penetration, reduce inflammation, recapitulate superoxide dismutase (SOD) activity, and provide antimicrobial effects for AD treatment. The water-soluble EGCG@CDs in a few nanometers size exhibit a negative zeta potential, making them suitable for effective transdermal penetration. The fluorescence properties, including an upconversion effect, make EGCG@CDs suitable imaging probes for both in vitro and in vivo applications. By mimicking the SOD enzyme, EGCG@CDs scavenge reactive oxygen species (ROS) and actively produce hydrogen peroxide through a highly catalytic capability toward the oxygen reduction reaction, resulting in the inhibition of bacterial growth. The enhanced antioxidant properties, high charge mobility, and various functional groups of EGCG@CDs prove effective in reducing intracellular ROS in an in vitro AD model. In the mouse AD model, EGCG@CDs incorporated into a hydrogel actively penetrated the epidermal layer, leading to ROS scavenging, reduced mast cell activation, and histological recovery of skin barriers. This research represents the versatile potential of EGCG@CDs in addressing AD and advancing tissue engineering.

Synthesizing Carbon Quantum Dots via Hydrothermal Reaction to Produce Efficient Antibacterial and Antibiofilm Nanomaterials

This study aimed to synthesize antibacterial carbon quantum dots (SP-CDs) from polyethyleneimine and spermidine via hydrothermal reaction. It was revealed that SP-CDs, with small size (7.18 nm) and high positive charge (+31.15 mV), had good fluorescence properties and lots of amino groups on their surfaces. The inhibition effect of SP-CDs on Staphylococcus aureus was better than that towards Escherichia coli, and the SP-CDs also had an inhibitory effect on multi-drug-resistant E. coli. The mechanism of SP-CDs shows that the SP-CDs were adsorbed on the surface of the negatively charged cell membrane through electrostatic interaction. SP-CDs can cause changes in membrane permeability, resulting in a shift of the cell membrane from order to disorder and the decomposition of chemical components, followed by the leakage of cell contents, resulting in bacterial death. SP-CDs can also significantly inhibit biofilm formation, destroy mature biofilms and reduce the number of living cells. Moreover, SP-CDs had negligible antimicrobial resistance even after 18 generations of treatment. This study proves that SP-CDs effectively inhibit the proliferation of foodborne pathogens, providing new feasibility for the application of carbon-based nanomaterials in the food industry.

Progress in drug delivery and diagnostic applications of carbon dots: a systematic review

Carbon dots (CDs), which have particle size of less than 10 nm, are carbon-based nanomaterials that are used in a wide range of applications in the area of novel drug delivery in cancer, ocular diseases, infectious diseases, and brain disorders. CDs are biocompatible, eco-friendly, easy to synthesize, and less toxic with excellent chemical inertness, which makes them very good nanocarrier system to deliver multi-functional drugs effectively. A huge number of researchers worldwide are working on CDs-based drug delivery systems to evaluate their versatility and efficacy in the field of pharmaceuticals. As a result, there is a tremendous increase in our understanding of the physicochemical properties, diagnostic and drug delivery aspects of CDs, which consequently has led us to design and develop CDs-based theranostic system for the treatment of multiple disorders. In this review, we aim to summarize the advances in application of CDs as nanocarrier including gene delivery, vaccine delivery and antiviral delivery, that has been carried out in the last 5 years.

Preparation of Nitrogen and Sulfur Co-Doped Fluorescent Carbon Dots from Cellulose Nanocrystals as a Sensor for the Detection of Rutin

The poor water solubility, large particle size, and low accessibility of cellulose, the most abundant bioresource, have restricted its generalization to carbon dots (CDs). Herein, nitrogen and sulfur co-doped fluorescent carbon dots (N, S-CDs) were hydrothermally synthesized using cellulose nanocrystals (CNC) as a carbon precursor, exhibiting a small particle size and excellent aqueous dispersion. Thiourea was selected as a nitrogen and sulfur dopant to introduce abundant fluorescent functional groups into N, S-CDs. The resulting N, S-CDs exhibited nanoscale size (6.2 nm), abundant functional groups, bright blue fluorescence, high quantum yield (QY = 27.4%), and high overall yield (16.2%). The excellent optical properties of N, S-CDs endowed it to potentially display a highly sensitive fluorescence "turn off" response to rutin. The fluorescence response for rutin allowed a wide linear range of 0-40 mg·L^-1, with a limit of detection (LOD) of 0.02 μM, which revealed the potential of N, S-CDs as a rapid and simple sensing platform for rutin detection. In addition, the sustainable and large-scale production of the N, S-CDs in this study paves the way for the successful high-value utilization of cellulose.

Multicolor Emitting Carbon Dot-Reinforced PVA Composites as Edible Food Packaging Films and Coatings with Antimicrobial and UV-Blocking Properties

Active food packaging has become attractive because of the possibility to provide a longer shelf-life by loading functional agents into the packages to maintain the quality of food products. Herein, photoluminescent and transparent polyvinyl alcohol (PVA)-based composites embedding multicolor fluorescent carbon dots (CD/PVA) were prepared by the solvent casting method. The prepared CDs emit a strong and stable fluorescence in solution while the CD/PVA composite films were transparent, flexible, and showed UV-blocking activity with a strong fluorescence emission. Blue color-emitting CDs showed the highest UV blockage at UVA (87.04%), UVB (87.04%), and UVC (92.22%) regions while PVA alone absorbed only less than 25% of the light in all UV regions. UV blockage capacity was shown to be decreased by half, in line with the emission color shift from blue to red. Thermal properties of the PVA film were improved by the addition of CDs to the polymer, and in vitro cell viability tests showed that none of the CDs were cytotoxic against the human lung fibroblast healthy cell line (MRC-F cells) when integrated into the PVA. The antimicrobial activity of CD/PVA nanofilms was qualitatively determined. The prepared films exhibited good antimicrobial activity against both Gram-positive and Gram-negative bacteria with mild antioxidant and metal chelating activity, and significant inhibition of biofilm formation with a strong link with emitted color and the concentration of the composites. Green- and red-emitting CD/PVA with the highest antimicrobial activity were then analyzed and compared with the plane PVA employing their effect on the shelf-life of strawberries as a model for perishable foods. Fresh strawberries dip coated with CD/PVA and PVA were monitored over time, and virtual evaluations showed that CDs/PVA film coating resulted in reduced weight and moisture loss and significantly inhibited the fungal growth and spoiling for over 6 days at RT and 12 days at fridge conditions maintaining the visual appearance and natural color of the fruit. The findings in this work indicated the potential of reported CD as non-cytotoxic, UV-blocking antimicrobial additives for the development of edible coatings and packages for their use in the food industry, as well as pharmaceutical and healthcare applications.

Development of carbon quantum dot-based lateral flow immunoassay for sensitive detection of aflatoxin M1 in milk

Currently, there is a great demand for simple, sensitive, and accurate sensors for aflatoxin M1 (AFM1) in dairy products. In the present research, a novel fluorescent immunosensor based on nitrogen-doped carbon quantum dots (CQDs) has been developed for AFM1 analysis. The N-doped CQDs were synthesized through the hydrothermal approach using citric acid and polyethyleneimine as precursors. The CQDs showed bright blue emission under ultraviolet light irradiation and a maximum emission was observed at 450 nm upon excitation at 350 nm. The anti-AFM1 antibody (Ab) was immobilized on the as-obtained amine-functionalized CQDs and the obtained CQDs/Ab probe was then directly used for developing the immunoassays for AFM1. The fluorescence of the CQDs/Ab solution was effectively quenched in the presence of increasing AFM1 concentrations. Under the optimized conditions, the fluorescent nanosensor exhibited high sensitivity towards AFM1 in the range of 0.2-0.8 ng/mL with low limit of detection i.e., 0.07 ng/mL in standard buffer. Furthermore, the CQDs/Ab immunosensor was developed as a lateral flow design for detecting the aflatoxin residues in milk. This strategy can be used for the development of low-cost, rapid, and highly sensitive sensor strips for the detection of AFM1 in dairy products.

Optical properties and photoactivity of carbon nanodots synthesized from olive solid wastes at different carbonization temperatures

Carbon nanodots (CNDs) have many fascinating properties, such as optical properties (UV-Visible absorption and fluorescence emission), which make them good candidates in many applications, such as photocatalysts for the degradation of several organic pollutants. This study aims to synthesize CNDs from olive solid wastes at different carbonization temperatures from 300 to 900 °C and study the effect on the optical properties of the CNDs, such UV-Vis, fluorescence, quantum yield, and energy bandgap, in addition to the influence on the photoactivity of the CNDs as photocatalysts for the degradation of methylene blue (MB). CNDs were prepared from olive solid wastes (OSWs) by pyrolysis at different temperatures (300–900 °C) for conversion to carbonized material, and then oxidized chemically in the presence of hydrogen peroxide (H₂O₂). It was found that an increase in the carbonization temperature of the OSWs leads to an increase in the product yield with a maximum value at 500 °C, and it then decreased dramatically. On the other hand, a decrease in fluorescence due to the diminishment of oxygen groups and the destruction of the surface of the CNDs was observed. The higher quantum yield (5.17%) and bandgap (2.77 eV) were achieved for CNDs prepared from OSWs that carbonized at 300 °C. The rate and degradation efficiency of MB were studied with the different synthesized CNDs, and it was found that an increase in the carbonization temperature leads to a decrease in the rate and degradation efficiency of MB, with the highest degradation rate of 0.0575 min⁻¹ and degradation efficiency of 100% after 120 minutes of light irradiation being realized for the sample carbonized at 300 °C.

Carbon nanodots with different optical properties and photoactivity degrees as photocatalysts for the degradation of methylene blue are successfully synthesized from olive solid wastes at different carbonization temperatures.

Fabrication of fluorescence sensor based on molecularly imprinted polymer on amine-modified carbon quantum dots for fast and highly sensitive and selective detection of tannic acid in food samples

Developing a rapid and accurate method for tannic acid (TA) detection and measurement is necessary due to its extensive applications in the food industry. In this work, a fluorescence sensor with a low limit of detection was synthesized for TA for the first time. First, amine-modified carbon quantum dots (a-CQDs) with high-quantum yield were synthesized by the hydrothermal method. A layer of molecularly imprinted polymer (MIP) was then placed on a-CQDs by the surface printing method to increase the sensor selectivity. The mechanism of TA detection by the prepared a-CQDs/MIPs was quenching the fluorescence intensity of a-CQDs in the presence of TA due to the transfer of electrons from the TA to the a-CQDs. The linear range of the sensor response was at the TA concentration of 1-200 nmol L^-1 and its detection limit was 0.6 nmol L^-1 under optimal conditions. Finally, the sensor was used to measure TA in grape juice, green tea, and black tea samples using the recovery method. Recovery values between 97.4 and 103.6% and RSDs less than 3.8% indicated the high potential of the prepared sensor for TA analysis in complex food samples.

Nanodrug Transmembrane Transport Research Based on Fluorescence Correlation Spectroscopy

Although conventional fluorescence intensity imaging can be used to qualitatively study the drug toxicity of nanodrug carrier systems at the single-cell level, it has limitations for studying nanodrug transport across membranes. Fluorescence correlation spectroscopy (FCS) can provide quantitative information on nanodrug concentration and diffusion in a small area of the cell membrane; thus, it is an ideal tool for studying drug transport across the membrane. In this paper, the FCS method was used to measure the diffusion coefficients and concentrations of carbon dots (CDs), doxorubicin (DOX) and CDs-DOX composites in living cells (COS7 and U₂OS) for the first time. The drug concentration and diffusion coefficient in living cells determined by FCS measurements indicated that the CDs-DOX composite distinctively improved the transmembrane efficiency and rate of drug molecules, in accordance with the conclusions drawn from the fluorescence imaging results. Furthermore, the effects of pH values and ATP concentrations on drug transport across the membrane were also studied. Compared with free DOX under acidic conditions, the CDs-DOX complex has higher cellular uptake and better transmembrane efficacy in U₂OS cells. Additionally, high concentrations of ATP will cause negative changes in cell membrane permeability, which will hinder the transmembrane transport of CDs and DOX and delay the rapid diffusion of CDs-DOX. The results of this study show that the FCS method can be utilized as a powerful tool for studying the expansion and transport of nanodrugs in living cells, and might provide a new drug exploitation strategy for cancer treatment in vivo.

Carbon Dots: Classification, Properties, Synthesis, Characterization, and Applications in Health Care-An Updated Review (2018-2021)

Carbon dots (CDs) are usually smaller than 10 nm in size, and are meticulously formulated and recently introduced nanomaterials, among the other types of carbon-based nanomaterials. They have gained significant attention and an incredible interest in the field of nanotechnology and biomedical science, which is merely due to their considerable and exclusive attributes; including their enhanced electron transferability, photobleaching and photo-blinking effects, high photoluminescent quantum yield, fluorescence property, resistance to photo-decomposition, increased electrocatalytic activity, good aqueous solubility, excellent biocompatibility, long-term chemical stability, cost-effectiveness, negligible toxicity, and acquaintance of large effective surface area-to-volume ratio. CDs can be readily functionalized owing to the abundant functional groups on their surfaces, and they also exhibit remarkable sensing features such as specific, selective, and multiplex detectability. In addition, the physico-chemical characteristics of CDs can be easily tunable based on their intended usage or application. In this comprehensive review article, we mainly discuss the classification of CDs, their ideal properties, their general synthesis approaches, and primary characterization techniques. More importantly, we update the readers about the recent trends of CDs in health care applications (viz., their substantial and prominent role in the area of electrochemical and optical biosensing, bioimaging, drug/gene delivery, as well as in photodynamic/photothermal therapy).

Carbon Dots as an Emergent Class of Antimicrobial Agents

Antimicrobial resistance is a recognized global challenge. Tools for bacterial detection can combat antimicrobial resistance by facilitating evidence-based antibiotic prescribing, thus avoiding their overprescription, which contributes to the spread of resistance. Unfortunately, traditional culture-based identification methods take at least a day, while emerging alternatives are limited by high cost and a requirement for skilled operators. Moreover, photodynamic inactivation of bacteria promoted by photosensitisers could be considered as one of the most promising strategies in the fight against multidrug resistance pathogens. In this context, carbon dots (CDs) have been identified as a promising class of photosensitiser nanomaterials for the specific detection and inactivation of different bacterial species. CDs possess exceptional and tuneable chemical and photoelectric properties that make them excellent candidates for antibacterial theranostic applications, such as great chemical stability, high water solubility, low toxicity and excellent biocompatibility. In this review, we will summarize the most recent advances on the use of CDs as antimicrobial agents, including the most commonly used methodologies for CD and CD/composites syntheses and their antibacterial properties in both in vitro and in vivo models developed in the last 3 years.

Green sonochemistry assisted synthesis of hollow magnetic and photoluminescent MgFe2O4-carbon dot nanocomposite as a sensor for toxic Ni(ii), Cd(ii) and Hg(ii) ions and bacteria

The purpose of this study was synthesis of photoluminescent nanoparticles for detection of toxic metal ions. Also, these controllable magnetic nanocomposites were used for detection of Pseudomonas aeruginosa bacteria. Carbon nano-templates were formed by calcination and sonication of lemon extract as a bio-compatible precursor. Then MgFe₂O₄ nanoparticles were incorporated on the carbon nano-templates. The composite was calcinated to decompose carbon and obtain hollow structures. Finally, photoluminescent carbon dots were deposited on the porous magnesium ferrite core. Because of the hollow structure, carbon dots can diffuse to the Mg-ferrite core so magnetic and photoluminescence properties are available simultaneously. Photoluminescence intensity decreases with increasing Ni(ii), Cd(ii), Hg(ii) metal ions and Pseudomonas aeruginosa. Results show an effective nanostructure for identification of toxic metal ions and also bacteria.

The purpose of this study is synthesis of magnetic and photoluminescence nanoparticles at the same time for finding of bacteria that could be fatal and its detection are crucial for some illness prohibition.

Glutathione-decorated fluorescent carbon quantum dots for sensitive and selective detection of levodopa

Levodopa has been a standard drug for treating Parkinson's disease since the 1960s, but it has caused many side effects such as wearing-off, motor fluctuation, and dystonia. In this work, we developed glutathione-conjugated carbon quantum dots (GSH-CQDs) as a novel fluorescent sensor for sensitive and selective detection of levodopa. The GSH-CQDs were prepared by EDC/NHS coupling reaction of glutathione (GSH) with amine-functionalized CQDs (N-CQDs) synthesized using meta-phenylenediamine and ethylenediamine. The synthesized GSH-CQDs emitted bright green fluorescence with a high quantum yield (QY) of 22.42 ± 6.88%. However, upon the addition of levodopa to GSH-CQDs under alkaline conditions, the fluorescence of GSH-CQDs was quenched. Since levodopa is converted to dopaquinone in an alkaline environment, it is presumed that thiol groups of GHS-CQDs form covalent bonds with dopaquinone, causing fluorescence quenching through photoinduced electron transfer. Therefore, as the concentration of levodopa increased, the fluorescence intensity of GSH-CQDs was gradually decreased. Under optimal conditions, a linear response was observed in the range of 0.05-1 μM, and limit of detection (LOD) was determined to be 0.057 μM. The GSH-CQDs exhibited high specificity to levodopa over other non-target biological substances, quinone derivatives, and Parkinson's medications. Furthermore, the capability of this GSH-CQDs sensor for monitoring levodopa in human serum were validated with excellent precision and recovery rates of 100.20-103.33%.

You Don't Learn That in School: An Updated Practical Guide to Carbon Quantum Dots

Carbon quantum dots (CQDs) have started to emerge as candidates for application in cell imaging, biosensing, and targeted drug delivery, amongst other research fields, due to their unique properties. Those applications are possible as the CQDs exhibit tunable fluorescence, biocompatibility, and a versatile surface. This review aims to summarize the recent development in the field of CQDs research, namely the latest synthesis progress concerning materials/methods, surface modifications, characterization methods, and purification techniques. Furthermore, this work will systematically explore the several applications CQDs have been subjected to, such as bioimaging, fluorescence sensing, and cancer/gene therapy. Finally, we will briefly discuss in the concluding section the present and future challenges, as well as future perspectives and views regarding the emerging paradigm that is the CQDs research field.

Carbon Dots Fabrication: Ocular Imaging and Therapeutic Potential

Vision loss is a major complication in common ocular infections and diseases such as bacterial keratitis, age-related macular degeneration (AMD) and diabetic retinopathy (DR). The prevalence of such ophthalmic diseases represents an urgent need to develop safe, effective, and long-term treatments. Current therapies are riddled with drawbacks and limitations which calls for the exploration of alternative drug delivery mechanisms. Toxicity of the inorganic metals and metal oxides used for drug delivery raise safety concerns that are alleviated with the alternate use of, a natural and organic polymer which is both biocompatible and environmentally friendly. Carbon dots (CDs) represent a great potential in novel biomedical applications due to their tunable fluorescence, biocompatibility, and ability to be conjugated with diverse therapeutic materials. There is a growing interest on the exploitation of these properties for drug delivery with enhanced bio-imaging. However, there are limited reports of CD applications for ophthalmic indications. In this review, we focus on the CD potential and the development of translational therapies for ophthalmic diseases. The current review presents better understanding of fabrication of CDs and how it may be useful in delivering anti-bacterial agents, anti-VEGF molecules as well as imaging for ophthalmic applications.