Detecting caries lesions of different radiographic extension on bitewings using deep learning

Diagnostic performance of artificial intelligence-aided caries detection on bitewing radiographs: a systematic review and meta-analysis

The accuracy of artificial intelligence-aided (AI) caries diagnosis can vary considerably depending on numerous factors. This review aimed to assess the diagnostic accuracy of AI models for caries detection and classification on bitewing radiographs. Publications after 2010 were screened in five databases. A customized risk of bias (RoB) assessment tool was developed and applied to the 14 articles that met the inclusion criteria out of 935 references. Dataset sizes ranged from 112 to 3686 radiographs. While 86 % of the studies reported a model with an accuracy of ≥80 %, most exhibited unclear or high risk of bias. Three studies compared the model's diagnostic performance to dentists, in which the models consistently showed higher average sensitivity. Five studies were included in a bivariate diagnostic random-effects meta-analysis for overall caries detection. The diagnostic odds ratio was 55.8 (95 % CI= 28.8 - 108.3), and the summary sensitivity and specificity were 0.87 (0.76 - 0.94) and 0.89 (0.75 - 0.960), respectively. Independent meta-analyses for dentin and enamel caries detection were conducted and showed sensitivities of 0.84 (0.80 - 0.87) and 0.71 (0.66 - 0.75), respectively. Despite the promising diagnostic performance of AI models, the lack of high-quality, adequately reported, and externally validated studies highlight current challenges and future research needs.

Validation of artificial intelligence application for dental caries diagnosis on intraoral bitewing and periapical radiographs

OBJECTIVES

This study aimed to assess the reliability of AI-based system that assists the healthcare processes in the diagnosis of caries on intraoral radiographs.

METHODS

The proximal surfaces of the 323 selected teeth on the intraoral radiographs were evaluated by two independent observers using an AI-based (Diagnocat) system. The presence or absence of carious lesions was recorded during Phase 1. After 4 months, the AI-aided human observers evaluated the same radiographs (Phase 2), and the advanced convolutional neural network (CNN) reassessed the radiographic data (Phase 3). Subsequently, data reflecting human disagreements were excluded (Phase 4). For each phase, the Cohen and Fleiss kappa values, as well as the sensitivity, specificity, positive and negative predictive values, and diagnostic accuracy of Diagnocat, were calculated.

RESULTS

During the four phases, the range of Cohen kappa values between the human observers and Diagnocat were κ=0.66-1, κ=0.58-0.7, and κ=0.49-0.7. The Fleiss kappa values were κ=0.57-0.8. The sensitivity, specificity and diagnostic accuracy values ranged between 0.51-0.76, 0.88-0.97 and 0.76-0.86, respectively.

CONCLUSIONS

The Diagnocat CNN supports the evaluation of intraoral radiographs for caries diagnosis, as determined by consensus between human and AI system observers.

CLINICAL SIGNIFICANCE

Our study may aid in the understanding of deep learning-based systems developed for dental imaging modalities for dentists and contribute to expanding the body of results in the field of AI-supported dental radiology..

Expert gaze as a usability indicator of medical AI decision support systems: a preliminary study

Given the current state of medical artificial intelligence (AI) and perceptions towards it, collaborative systems are becoming the preferred choice for clinical workflows. This work aims to address expert interaction with medical AI support systems to gain insight towards how these systems can be better designed with the user in mind. As eye tracking metrics have been shown to be robust indicators of usability, we employ them for evaluating the usability and user interaction with medical AI support systems. We use expert gaze to assess experts' interaction with an AI software for caries detection in bitewing x-ray images. We compared standard viewing of bitewing images without AI support versus viewing where AI support could be freely toggled on and off. We found that experts turned the AI on for roughly 25% of the total inspection task, and generally turned it on halfway through the course of the inspection. Gaze behavior showed that when supported by AI, more attention was dedicated to user interface elements related to the AI support, with more frequent transitions from the image itself to these elements. When considering that expert visual strategy is already optimized for fast and effective image inspection, such interruptions in attention can lead to increased time needed for the overall assessment. Gaze analysis provided valuable insights into an AI's usability for medical image inspection. Further analyses of these tools and how to delineate metrical measures of usability should be developed.

Applications and performance of artificial intelligence models in removable prosthodontics: A literature review

PURPOSE

In this narrative review, we present the current applications and performances of artificial intelligence (AI) models in different phases of the removable prosthodontic workflow and related research topics.

STUDY SELECTION

A literature search was conducted using PubMed, Scopus, Web of Science, and Google Scholar databases between January 2010 and January 2023. Search terms related to AI were combined with terms related to removable prosthodontics. Articles reporting the structure and performance of the developed AI model were selected for this literature review.

RESULTS

A total of 15 articles were relevant to the application of AI in removable prosthodontics, including maxillofacial prosthetics. These applications included the design of removable partial dentures, classification of partially edentulous arches, functional evaluation and outcome prediction in complete denture treatment, early prosthetic management of patients with cleft lip and palate, coloration of maxillofacial prostheses, and prediction of the material properties of denture teeth. Various AI models with reliable prediction accuracy have been developed using supervised learning.

CONCLUSIONS

The current applications of AI in removable prosthodontics exhibit significant potential for improving the prosthodontic workflow, with high accuracy levels reported in most of the reviewed studies. However, the focus has been predominantly on the diagnostic phase, with few studies addressing treatment planning and implementation. Because the number of AI-related studies in removable prosthodontics is limited, more models targeting different prosthodontic disciplines are required.

The concept of AI-assisted self-monitoring for skeletal malocclusion

Background: Skeletal malocclusion is common among populations. Its severity often increases during adolescence, yet it is frequently overlooked. The introduction of deep learning in stomatology has opened a new avenue for self-health management. Methods: In this study, networks were trained using lateral photographs of 2109 newly diagnosed patients. The performance of the models was thoroughly evaluated using various metrics, such as sensitivity, specificity, accuracy, confusion matrix analysis, the receiver operating characteristic curve, and the area under the curve value. Heat maps were generated to further interpret the models' decisions. A comparative analysis was performed to assess the proposed models against the expert judgment of orthodontic specialists. Results: The modified models reached an impressive average accuracy of 84.50% (78.73%-88.87%), with both sex and developmental stage information contributing to the AI system's enhanced performance. The heat maps effectively highlighted the distinct characteristics of skeletal class II and III malocclusion in specific regions. In contrast, the specialist achieved a mean accuracy of 71.89% (65.25%-77.64%). Conclusions: Deep learning appears to be a promising tool for assisting in the screening of skeletal malocclusion. It provides valuable insights for expanding the use of AI in self-monitoring and early detection within a family environment.

Maxillary sinus detection on cone beam computed tomography images using ResNet and Swin Transformer-based UNet

OBJECTIVES

This study, which uses artificial intelligence-based methods, aimed to determine the limits of pathologic conditions and infections related to the maxillary sinus in cone beam computed tomography (CBCT) images to facilitate the work of dentists.

METHODS

A new UNet architecture based on a state-of-the-art Swin transformer called Res-Swin-UNet was developed to detect the sinus. The encoder part of the proposed network model consists of a pre-trained ResNet architecture, and the decoder part consists of Swin transformer blocks. Swin transformers achieve powerful global context properties with self-attention mechanisms. Because the output of the Swin transformer generates sectorized features, the patch expanding layer was used in this section instead of the traditional upsampling layer. In the last layer of the decoder, sinus diagnosis was conducted through classical convolution and sigmoid function. In experimental works, we used a data set including 298 CBCT images.

RESULTS

The Res-Swin-UNet model achieved more success, with a 91.72% F1-score, 99% accuracy, and 84.71% IoU, outperforming the state-of-the-art models.

CONCLUSIONS

The deep learning-based model proposed in the present study can assist dentists in automatically detecting the boundaries of pathologic conditions and infections within the maxillary sinus based on CBCT images.

Artificial intelligence for caries detection: a novel diagnostic tool using deep learning algorithms

OBJECTIVES

The aim of this study was to develop an assessment tool for automatic detection of dental caries in periapical radiographs using convolutional neural network (CNN) architecture.

METHODS

A novel diagnostic model named ResNet + SAM was established using numerous periapical radiographs (4278 images) annotated by medical experts to automatically detect dental caries. The performance of the model was compared to the traditional CNNs (VGG19, ResNet-50), and the dentists. The Gradient-weighted Class Activation Mapping (Grad-CAM) technique shows the region of interest in the image for the CNNs.

RESULTS

ResNet + SAM demonstrated significantly improved performance compared to the modified ResNet-50 model, with an average F1 score of 0.886 (95% CI 0.855-0.918), accuracy of 0.885 (95% CI 0.862-0.901) and AUC of 0.954 (95% CI 0.924-0.980). The comparison between the performance of the model and the dentists revealed that the model achieved higher accuracy than that of the junior dentists. With the assist of the tool, the dentists achieved superior metrics with a mean F1 score of 0.827 and the interobserver agreement for dental caries is enhanced from 0.592/0.610 to 0.706/0.723.

CONCLUSIONS

According to the results obtained from the experiments, the automatic assessment tool using the ResNet + SAM model shows remarkable performance and has excellent possibilities in identifying dental caries. The use of the assessment tool in clinical practice can be of great benefit as a clinical decision-making support in dentistry and reduce the workload of dentists.

Image preprocessing with contrast-limited adaptive histogram equalization improves the segmentation performance of deep learning for the articular disk of the temporomandibular joint on magnetic resonance images

OBJECTIVES

The objective was to evaluate the robustness of deep learning (DL)-based encoder-decoder convolutional neural networks (ED-CNNs) for segmenting temporomandibular joint (TMJ) articular disks using data sets acquired from 2 different 3.0-T magnetic resonance imaging (MRI) scanners using original images and images subjected to contrast-limited adaptive histogram equalization (CLAHE).

STUDY DESIGN

In total, 536 MR images from 49 individuals were examined. An expert orthodontist identified and manually segmented the disks in all images, which were then reviewed by another expert orthodontist and 2 expert oral and maxillofacial radiologists. These images were used to evaluate a DL-based semantic segmentation approach using an ED-CNN. Original and preprocessed CLAHE images were used to train and validate the models whose performances were compared.

RESULTS

Original and CLAHE images acquired on 1 scanner had pixel values that were significantly darker and with lower contrast. The values of 3 metrics-the Dice similarity coefficient, sensitivity, and positive predictive value-were low when the original MR images were used for model training and validation. However, these metrics significantly improved when images were preprocessed with CLAHE.

CONCLUSIONS

The robustness of the ED-CNN model trained on a dataset obtained from a single device is low but can be improved with CLAHE preprocessing. The proposed system provides promising results for a DL-based, fully automated segmentation method for TMJ articular disks on MRI.

Developing the Benchmark: Establishing a Gold Standard for the Evaluation of AI Caries Diagnostics

Background/Objectives: The aim of this study was to establish a histology-based gold standard for the evaluation of artificial intelligence (AI)-based caries detection systems on proximal surfaces in bitewing images. Methods: Extracted human teeth were used to simulate intraoral situations, including caries-free teeth, teeth with artificially created defects and teeth with natural proximal caries. All 153 simulations were radiographed from seven angles, resulting in 1071 in vitro bitewing images. Histological examination of the carious lesion depth was performed twice by an expert. A total of thirty examiners analyzed all the radiographs for caries. Results: We generated in vitro bitewing images to evaluate the performance of AI-based carious lesion detection against a histological gold standard. All examiners achieved a sensitivity of 0.565, a Matthews correlation coefficient (MCC) of 0.578 and an area under the curve (AUC) of 76.1. The histology receiver operating characteristic (ROC) curve significantly outperformed the examiners' ROC curve (p < 0.001). All examiners distinguished induced defects from true caries in 54.6% of cases and correctly classified 99.8% of all teeth. Expert caries classification of the histological images showed a high level of agreement (intraclass correlation coefficient (ICC) = 0.993). Examiner performance varied with caries depth (p ≤ 0.008), except between E2 and E1 lesions (p = 1), while central beam eccentricity, gender, occupation and experience had no significant influence (all p ≥ 0.411). Conclusions: This study successfully established an unbiased dataset to evaluate AI-based caries detection on bitewing surfaces and compare it to human judgement, providing a standardized assessment for fair comparison between AI technologies and helping dental professionals to select reliable diagnostic tools.

Empowering Modern Dentistry: The Impact of Artificial Intelligence on Patient Care and Clinical Decision Making

Advancements in artificial intelligence (AI) are poised to catalyze a transformative shift across diverse dental disciplines including endodontics, oral radiology, orthodontics, pediatric dentistry, periodontology, prosthodontics, and restorative dentistry. This narrative review delineates the burgeoning role of AI in enhancing diagnostic precision, streamlining treatment planning, and potentially unveiling innovative therapeutic modalities, thereby elevating patient care standards. Recent analyses corroborate the superiority of AI-assisted methodologies over conventional techniques, affirming their capacity for personalization, accuracy, and efficiency in dental care. Central to these AI applications are convolutional neural networks and deep learning models, which have demonstrated efficacy in diagnosis, prognosis, and therapeutic decision making, in some instances surpassing traditional methods in complex cases. Despite these advancements, the integration of AI into clinical practice is accompanied by challenges, such as data security concerns, the demand for transparency in AI-generated outcomes, and the imperative for ongoing validation to establish the reliability and applicability of AI tools. This review underscores the prospective benefits of AI in dental practice, envisioning AI not as a replacement for dental professionals but as an adjunctive tool that fortifies the dental profession. While AI heralds improvements in diagnostics, treatment planning, and personalized care, ethical and practical considerations must be meticulously navigated to ensure responsible development of AI in dentistry.

Construction and Evaluation of an AI-based CBCT Resolution Optimization Technique for Extracted Teeth

INTRODUCTION

In dental clinical practice, cone-beam computed tomography (CBCT) is commonly used to assist practitioners to recognize the complex morphology of root canal systems; however, because of its resolution limitations, certain small anatomical structures still cannot be accurately recognized on CBCT. The purpose of this study was to perform image super-resolution (SR) processing on CBCT images of extracted human teeth with the help of a deep learning model, and to compare the differences among CBCT, super-resolution computed tomography (SRCT), and micro-computed tomography (Micro-CT) images through three-dimensional reconstruction.

METHODS

The deep learning model (Basicvsr++) was selected and modified. The dataset consisted of 171 extracted teeth that met inclusion criteria, with 40 maxillary first molars as the training set and 40 maxillary first molars as well as 91 teeth from other tooth positions as the external test set. The corresponding CBCT, SRCT, and Micro-CT images of each tooth in test sets were reconstructed using Mimics Research 17.0, and the root canal recognition rates in the 3 groups were recorded. The following parameters were measured: volume of hard tissue (V1), volume of pulp chamber and root canal system (V2), length of visible root canals under orifice (VL-X, where X represents the specific root canal), and intersection angle between coronal axis of canal and long axis of tooth (∠X, where X represents the specific root canal). Data were statistically analyzed between CBCT and SRCT images using paired sample t-test and Wilcoxon test analysis, with the measurement from Micro-CT images as the gold standard.

RESULTS

Images from all tested teeth were successfully processed with the SR program. In 4-canal maxillary first molar, identification of MB2 was 72% (18/25) in CBCT group, 92% (23/25) in SRCT group, and 100% (25/25) in Micro-CT group. The difference of hard tissue volume between SRCT and Micro-CT was significantly smaller than that between CBCT and Micro-CT in all tested teeth except 4-canal mandibular first molar (P < .05). Similar results were obtained in volume of pulp chamber and root canal system in all tested teeth (P < .05). As for length of visible root canals under orifice, the difference between SRCT and Micro-CT was significantly smaller than that between CBCT and Micro-CT (P < .05) in most root canals.

CONCLUSIONS

The deep learning model developed in this study helps to optimize the root canal morphology of extracted teeth in CBCT. And it may be helpful for the identification of MB2 in the maxillary first molar.

Teeth segmentation and carious lesions segmentation in panoramic X-ray images using CariSeg, a networks' ensemble

Background

Dental cavities are common oral diseases that can lead to pain, discomfort, and eventually, tooth loss. Early detection and treatment of cavities can prevent these negative consequences. We propose CariSeg, an intelligent system composed of four neural networks that result in the detection of cavities in dental X-rays with 99.42% accuracy.

Method

The first model of CariSeg, trained using the U-Net architecture, segments the area of interest, the teeth, and crops the radiograph around it. The next component segments the carious lesions and it is an ensemble composed of three architectures: U-Net, Feature Pyramid Network, and DeeplabV3. For tooth identification two merged datasets were used: The Tufts Dental Database consisting of 1000 panoramic radiography images and another dataset of 116 anonymized panoramic X-rays, taken at Noor Medical Imaging Center, Qom. For carious lesion segmentation, a dataset consisting of 150 panoramic X-ray images was acquired from the Department of Oral and Maxillofacial Surgery and Radiology, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca.

Results

The experiments demonstrate that our approach results in 99.42% accuracy and a mean 68.2% Dice coefficient.

Conclusions

AI helps in detecting carious lesions by analyzing dental X-rays and identifying cavities that might be missed by human observers, leading to earlier detection and treatment of cavities and resulting in better oral health outcomes.

Identification of Root Canal Morphology in Fused-rooted Mandibular Second Molars From X-ray Images Based on Deep Learning

INTRODUCTION

Understanding the intricate anatomical morphology of fused-rooted mandibular second molars (MSMs) is essential for root canal treatment. The present study utilized a deep learning approach to identify the three-dimensional root canal morphology of MSMs from two-dimensional X-ray images.

METHODS

A total of 271 fused-rooted MSMs were included in the study. Micro-computed tomography reconstruction images and two-dimensional X-ray projection images were obtained. The ground truth of three-dimensional root canal morphology was determined through micro-computed tomography images, which were classified into merging, symmetrical, and asymmetrical types. To amplify the X-ray image dataset, traditional augmentation techniques from the python package Augmentor and a multiangle projection method were employed. Identification of root canal morphology was conducted using the pretrained VGG19, ResNet18, ResNet50, and EfficientNet-b5 on X-ray images. The classification results from convolutional neural networks (CNNs) were then compared with those performed by endodontic residents.

RESULTS

The multiangle projection augmentation method outperformed the traditional approach in all CNNs except for EfficientNet-b5. ResNet18 combined with the multiangle projection method outperformed all other combinations, with an overall accuracy of 79.25%. In specific classifications, accuracies of 81.13%, 86.79%, and 90.57% were achieved for merging, symmetrical, and asymmetrical types, respectively. Notably, CNNs surpassed endodontic residents in classification performance; the average accuracy for endodontic residents was only 60.38% (P < .05).

CONCLUSIONS

CNNs were more effective than endodontic residents in identifying the three-dimensional root canal morphology of MSMs. The result indicates that CNNs possess the capacity to employ two-dimensional images effectively in aiding three-dimensional diagnoses.

AI-Assisted Detection of Interproximal, Occlusal, and Secondary Caries on Bite-Wing Radiographs: A Single-Shot Deep Learning Approach

Tooth decay is a common oral disease worldwide, but errors in diagnosis can often be made in dental clinics, which can lead to a delay in treatment. This study aims to use artificial intelligence (AI) for the automated detection and localization of secondary, occlusal, and interproximal (D1, D2, D3) caries types on bite-wing radiographs. The eight hundred and sixty bite-wing radiographs were collected from the School of Dentistry database. Pre-processing and data augmentation operations were performed. Interproximal (D1, D2, D3), secondary, and occlusal caries on bite-wing radiographs were annotated by two oral radiologists. The data were split into 80% for training, 10% for validation, and 10% for testing. The AI-based training process was conducted using the YOLOv8 algorithm. A clinical decision support system interface was designed using the Python PyQT5 library, allowing for the use of dental caries detection without the need for complex programming procedures. In the test images, the average precision, average sensitivity, and average F1 score values for secondary, occlusal, and interproximal caries were obtained as 0.977, 0.932, and 0.954, respectively. The AI-based dental caries detection system yielded highly successful results in the test, receiving full approval from dentists for clinical use. YOLOv8 has the potential to increase sensitivity and reliability while reducing the burden on dentists and can prevent diagnostic errors in dental clinics.

Performance comparison of multifarious deep networks on caries detection with tooth X-ray images

OBJECTIVES

Deep networks have been preliminarily studied in caries diagnosis based on clinical X-ray images. However, the performance of different deep networks on caries detection is still unclear. This study aims to comprehensively compare the caries detection performances of recent multifarious deep networks with clinical dentist level as a bridge.

METHODS

Based on the self-collected periapical radiograph dataset in clinic, four most popular deep networks in two types, namely YOLOv5 and DETR object detection networks, and UNet and Trans-UNet segmentation networks, were included in the comparison study. Five dentists carried out the caries detection on the same testing dataset for reference. Key tooth-level metrics, including precision, sensitivity, specificity, F1-score and Youden index, were obtained, based on which statistical analysis was conducted.

RESULTS

The F1-score order of deep networks is YOLOv5 (0.87), Trans-UNet (0.86), DETR (0.82) and UNet (0.80) in caries detection. A same ranking order is found using the Youden index combining sensitivity and specificity, which are 0.76, 0.73, 0.69 and 0.64 respectively. A moderate level of concordance was observed between all networks and the gold standard. No significant difference (p > 0.05) was found between deep networks and between the well-trained network and dentists in caries detection.

CONCLUSIONS

Among investigated deep networks, YOLOv5 is recommended to be priority for caries detection in terms of its high metrics. The well-trained deep network could be used as a good assistance for dentists to detect and diagnose caries.

CLINICAL SIGNIFICANCE

The well-trained deep network shows a promising potential clinical application prospect. It can provide valuable support to healthcare professionals in facilitating detection and diagnosis of dental caries.

Surveying the landscape of diagnostic imaging in dentistry's future: Four emerging technologies with promise

BACKGROUND

Advances in digital radiography for both intraoral and panoramic imaging and cone-beam computed tomography have led the way to an increase in diagnostic capabilities for the dental care profession. In this article, the authors provide information on 4 emerging technologies with promise.

TYPES OF STUDIES REVIEWED

The authors feature the following: artificial intelligence in the form of deep learning using convolutional neural networks, dental magnetic resonance imaging, stationary intraoral tomosynthesis, and second-generation cone-beam computed tomography sources based on carbon nanotube technology and multispectral imaging. The authors review and summarize articles featuring these technologies.

RESULTS

The history and background of these emerging technologies are previewed along with their development and potential impact on the practice of dental diagnostic imaging. The authors conclude that these emerging technologies have the potential to have a substantial influence on the practice of dentistry as these systems mature. The degree of influence most likely will vary, with artificial intelligence being the most influential of the 4.

CONCLUSIONS AND PRACTICAL IMPLICATIONS

The readers are informed about these emerging technologies and the potential effects on their practice going forward, giving them information on which to base decisions on adopting 1 or more of these technologies. The 4 technologies reviewed in this article have the potential to improve imaging diagnostics in dentistry thereby leading to better patient care and heightened professional satisfaction.

Familiarity with ChatGPT Features Modifies Expectations and Learning Outcomes of Dental Students

OBJECTIVES

The number of approvals for AI-based systems is increasing rapidly, although AI clinical trial designs lack consideration of the impact of human-AI interaction. Aim of this work was to investigate how reading of an AI system (ChatGPT) features/descriptions could influence the willingness and expectations for use of this technology as well as dental students' learning performance.

METHODS

Dental students (N = 104) were asked to learn about side effects of drugs used in dental practice via reading recommended literature or ChatGPT. Expectations towards ChatGPT were measured by survey, before and after reading of a system features description, whilst learning outcomes were evaluated via pharmacology quiz.

RESULTS

Students who used ChatGPT (YG group) showed better results on the pharmacology quiz than students who neither read the description nor employed ChatGPT for learning (NN condition). Moreover, students who read the description of ChatGPT features yet did not use it (NG) showed better results on the pharmacology quiz compared with the NN condition, although none of them employed ChatGPT for learning. The NG students compared to the YG students had less trust in AI system assistance in learning, and after the AI system description reading, their expectations changed significantly, showing an association with quiz scores.

CONCLUSIONS

A majority of students in our cohort was reluctant to use ChatGPT. Furthermore, familarity (reading) with ChatGPT features appear to alter the expectations and enhance learning performance of students.suggesting an AI description-related cognitive bias. Hence the content description of ChatGPTshould be reviewed and verified prior to AI system use for educational purposes.

Perceptions and attitudes of dental students and dentists in South Korea toward artificial intelligence: a subgroup analysis based on professional seniority

BACKGROUND

This study explored dental students' and dentists' perceptions and attitudes toward artificial intelligence (AI) and analyzed differences according to professional seniority.

METHODS

In September to November 2022, online surveys using Google Forms were conducted at 2 dental colleges and on 2 dental websites. The questionnaire consisted of general information (8 or 10 items) and participants' perceptions, confidence, predictions, and perceived future prospects regarding AI (17 items). A multivariate logistic regression analysis was performed on 4 questions representing perceptions and attitudes toward AI to identify highly influential factors according to position, age, sex, residence, and self-reported knowledge level about AI of respondents. Participants were reclassified into 2 subgroups based on students' years in school and 4 subgroups based on dentists' years of experience. The chi-square test or Fisher's exact test was used to determine differences between dental students and dentists and between subgroups for all 17 questions.

RESULTS

The study included 120 dental students and 96 dentists. Participants with high level of AI knowledge were more likely to be interested in AI compared to those with moderate or low level (adjusted OR 24.345, p < 0.001). Most dental students (60.8%) and dentists (67.7%) predicted that dental AI would complement human limitations. Dental students responded that they would actively use AI in almost all cases (40.8%), while dentists responded that they would use AI only when necessary (44.8%). Dentists with 11-20 years of experience were the most likely to disagree that AI could outperform skilled dentists (50.0%), and respondents with longer careers had higher response rates regarding the need for AI education in schools.

CONCLUSIONS

Knowledge level about AI emerged as the factor influencing perceptions and attitudes toward AI, with both dental students and dentists showing similar views on recognizing the potential of AI as an auxiliary tool. However, students' and dentists' willingness to use AI differed. Although dentists differed in their confidence in the abilities of AI, all dentists recognized the need for education on AI. AI adoption is becoming a reality in dentistry, which requires proper awareness, proper use, and comprehensive AI education.

Dental Caries Detection and Classification in CBCT Images Using Deep Learning

OBJECTIVES

This study aimed to investigate the accuracy of deep learning algorithms to diagnose tooth caries and classify the extension and location of dental caries in cone beam computed tomography (CBCT) images. To the best of our knowledge, this is the first study to evaluate the application of deep learning for dental caries in CBCT images.

METHODS

The CBCT image dataset comprised 382 molar teeth with caries and 403 noncarious molar cases. The dataset was divided into a development set for training and validation and test set. Three images were obtained for each case, including axial, sagittal, and coronal. The test dataset was provided to a multiple-input convolutional neural network (CNN). The network made predictions regarding the presence or absence of dental decay and classified the lesions according to their depths and types for the provided samples. Accuracy, sensitivity, specificity, and F1 score values were measured for dental caries detection and classification.

RESULTS

The diagnostic accuracy, sensitivity, specificity, and F1 score for caries detection in carious molar teeth were 95.3%, 92.1%, 96.3%, and 93.2%, respectively, and for noncarious molar teeth were 94.8%, 94.3%, 95.8%, and 94.6%. The CNN network showed high sensitivity, specificity, and accuracy in classifying caries extensions and locations.

CONCLUSIONS

This research demonstrates that deep learning models can accurately identify dental caries and classify their depths and types with high accuracy, sensitivity, and specificity. The successful application of deep learning in this field will undoubtedly assist dental practitioners and patients in improving diagnostic and treatment planning in dentistry.

CLINICAL SIGNIFICANCE

This study showed that deep learning can accurately detect and classify dental caries. Deep learning can provide dental caries detection accurately. Considering the shortage of dentists in certain areas, using CNNs can lead to broader geographic coverage in detecting dental caries.

Detection of caries around restorations on bitewings using deep learning

OBJECTIVE

Secondary caries lesions adjacent to restorations, a leading cause of restoration failure, require accurate diagnostic methods to ensure an optimal treatment outcome. Traditional diagnostic strategies rely on visual inspection complemented by radiographs. Recent advancements in artificial intelligence (AI), particularly deep learning, provide potential improvements in caries detection. This study aimed to develop a convolutional neural network (CNN)-based algorithm for detecting primary caries and secondary caries around restorations using bitewings.

METHODS

Clinical data from 7 general dental practices in the Netherlands, comprising 425 bitewings of 383 patients, were utilized. The study used the Mask-RCNN architecture, for instance, segmentation, supported by the Swin Transformer backbone. After data augmentation, model training was performed through a ten-fold cross-validation. The diagnostic accuracy of the algorithm was evaluated by calculating the area under the Free-Response Receiver Operating Characteristics curve, sensitivity, precision, and F1 scores.

RESULTS

The model achieved areas under FROC curves of 0.806 and 0.804, and F1-scores of 0.689 and 0.719 for primary and secondary caries detection, respectively.

CONCLUSION

An accurate CNN-based automated system was developed to detect primary and secondary caries lesions on bitewings, highlighting a significant advancement in automated caries diagnostics.

CLINICAL SIGNIFICANCE

An accurate algorithm that integrates the detection of both primary and secondary caries will permit the development of automated systems to aid clinicians in their daily clinical practice.

Dental student application of artificial intelligence technology in detecting proximal caries lesions

OBJECTIVES

This study aimed to investigate the caries diagnosis performances of dental students after training with an artificial intelligence (AI) application utilizing deep learning techniques, a type of artificial neural network.

METHODS

A total of 1200 bitewing radiographs were obtained from the institution's database and two specialist dentists labeled the caries lesions in the images. Randomly selected 1000 images were used for training purposes and the remaining 200 radiographs were used to evaluate the caries diagnostic performance of the AI. Then, a convolutional neural network, a deep learning algorithm commonly employed to analyze visual imagery problems, called "You Only Look Once," was modified and trained to detect enamel and dentin caries lesions in the radiographs. Forty dental students were selected voluntarily and randomly divided into two groups. The pre-test results of dental caries diagnosis performances of both groups were recorded. After 1 week, group 2 students were trained using an AI application. Then, the post-test results of both groups were recorded. The labeling duration of the students was also measured and analyzed.

RESULTS

When both groups' pre-test and post-test results were evaluated, a statistically significant improvement was found for all parameters examined except precision score (p < 0.05). However, the trained group's accuracy, sensitivity, specificity, and F1 scores were significantly higher than the non-trained group in terms of post-test scores (p < 0.05). In group 2 (trained group), the post-test labeling time was considerably increased (p < 0.05).

CONCLUSIONS

The students trained by AI showed promising results in detecting caries lesions. The use of AI can also contribute to the clinical education of dental students.

AI-Dentify: deep learning for proximal caries detection on bitewing x-ray - HUNT4 Oral Health Study

BACKGROUND

Dental caries diagnosis requires the manual inspection of diagnostic bitewing images of the patient, followed by a visual inspection and probing of the identified dental pieces with potential lesions. Yet the use of artificial intelligence, and in particular deep-learning, has the potential to aid in the diagnosis by providing a quick and informative analysis of the bitewing images.

METHODS

A dataset of 13,887 bitewings from the HUNT4 Oral Health Study were annotated individually by six different experts, and used to train three different object detection deep-learning architectures: RetinaNet (ResNet50), YOLOv5 (M size), and EfficientDet (D0 and D1 sizes). A consensus dataset of 197 images, annotated jointly by the same six dental clinicians, was used for evaluation. A five-fold cross validation scheme was used to evaluate the performance of the AI models.

RESULTS

The trained models show an increase in average precision and F1-score, and decrease of false negative rate, with respect to the dental clinicians. When compared against the dental clinicians, the YOLOv5 model shows the largest improvement, reporting 0.647 mean average precision, 0.548 mean F1-score, and 0.149 mean false negative rate. Whereas the best annotators on each of these metrics reported 0.299, 0.495, and 0.164 respectively.

CONCLUSION

Deep-learning models have shown the potential to assist dental professionals in the diagnosis of caries. Yet, the task remains challenging due to the artifacts natural to the bitewing images.

A novel deep learning-based perspective for tooth numbering and caries detection

OBJECTIVES

The aim of this study was automatically detecting and numbering teeth in digital bitewing radiographs obtained from patients, and evaluating the diagnostic efficiency of decayed teeth in real time, using deep learning algorithms.

METHODS

The dataset consisted of 1170 anonymized digital bitewing radiographs randomly obtained from faculty archives. After image evaluation and labeling process, the dataset was split into training and test datasets. This study proposed an end-to-end pipeline architecture consisting of three stages for matching tooth numbers and caries lesions to enhance treatment outcomes and prevent potential issues. Initially, a pre-trained convolutional neural network (CNN) utilized to determine the side of the bitewing images. Then, an improved CNN model YOLOv7 was proposed for tooth numbering and caries detection. In the final stage, our developed algorithm assessed which teeth have caries by comparing the numbered teeth with the detected caries, using the intersection over union value for the matching process.

RESULTS

According to test results, the recall, precision, and F1-score values were 0.994, 0.987 and 0.99 for teeth detection, 0.974, 0.985 and 0.979 for teeth numbering, and 0.833, 0.866 and 0.822 for caries detection, respectively. For teeth numbering and caries detection matching performance; the accuracy, recall, specificity, precision and F1-Score values were 0.934, 0.834, 0.961, 0.851 and 0.842, respectively.

CONCLUSIONS

The proposed model exhibited good achievement, highlighting the potential use of CNNs for tooth detection, numbering, and caries detection, concurrently.

CLINICAL SIGNIFICANCE

CNNs can provide valuable support to clinicians by automating the detection and numbering of teeth, as well as the detection of caries on bitewing radiographs. By enhancing overall performance, these algorithms have the capacity to efficiently save time and play a significant role in the assessment process.

Artificial intelligence for radiographic imaging detection of caries lesions: a systematic review

BACKGROUND

The aim of this systematic review is to evaluate the diagnostic performance of Artificial Intelligence (AI) models designed for the detection of caries lesion (CL).

MATERIALS AND METHODS

An electronic literature search was conducted on PubMed, Web of Science, SCOPUS, LILACS and Embase databases for retrospective, prospective and cross-sectional studies published until January 2023, using the following keywords: artificial intelligence (AI), machine learning (ML), deep learning (DL), artificial neural networks (ANN), convolutional neural networks (CNN), deep convolutional neural networks (DCNN), radiology, detection, diagnosis and dental caries (DC). The quality assessment was performed using the guidelines of QUADAS-2.

RESULTS

Twenty articles that met the selection criteria were evaluated. Five studies were performed on periapical radiographs, nine on bitewings, and six on orthopantomography. The number of imaging examinations included ranged from 15 to 2900. Four studies investigated ANN models, fifteen CNN models, and two DCNN models. Twelve were retrospective studies, six cross-sectional and two prospective. The following diagnostic performance was achieved in detecting CL: sensitivity from 0.44 to 0.86, specificity from 0.85 to 0.98, precision from 0.50 to 0.94, PPV (Positive Predictive Value) 0.86, NPV (Negative Predictive Value) 0.95, accuracy from 0.73 to 0.98, area under the curve (AUC) from 0.84 to 0.98, intersection over union of 0.3-0.4 and 0.78, Dice coefficient 0.66 and 0.88, F1-score from 0.64 to 0.92. According to the QUADAS-2 evaluation, most studies exhibited a low risk of bias.

CONCLUSION

AI-based models have demonstrated good diagnostic performance, potentially being an important aid in CL detection. Some limitations of these studies are related to the size and heterogeneity of the datasets. Future studies need to rely on comparable, large, and clinically meaningful datasets.

PROTOCOL

PROSPERO identifier: CRD42023470708.

Exploring the Methodological Approaches of Studies on Radiographic Databases Used in Cariology to Feed Artificial Intelligence: A Systematic Review

INTRODUCTION

A growing number of studies on diagnostic imaging show superior efficiency and accuracy of computer-aided diagnostic systems compared to those of certified dentists. This methodological systematic review aimed to evaluate the different methodological approaches used by studies focusing on machine learning and deep learning that have used radiographic databases to classify, detect, and segment dental caries.

METHODS

The protocol was registered in PROSPERO before data collection (CRD42022348097). Literature research was performed in MEDLINE, Embase, IEEE Xplore, and Web of Science until December 2022, without language restrictions. Studies and surveys using a dental radiographic database for the classification, detection, or segmentation of carious lesions were sought. Records deemed eligible were retrieved and further assessed for inclusion by two reviewers who resolved any discrepancies through consensus. A third reviewer was consulted when any disagreements or discrepancies persisted between the two reviewers. After data extraction, the same reviewers assessed the methodological quality using the CLAIM and QUADAS-AI checklists.

RESULTS

After screening 325 articles, 35 studies were eligible and included. The bitewing was the most commonly used radiograph (n = 17) at the time when detection (n = 15) was the most explored computer vision task. The sample sizes used ranged from 95 to 38,437, while the augmented training set ranged from 300 to 315,786. Convolutional neural network was the most commonly used model. The mean completeness of CLAIM items was 49% (SD ± 34%). The applicability of the CLAIM checklist items revealed several weaknesses in the methodology of the selected studies: most of the studies were monocentric, and only 9% of them used an external test set when evaluating the model's performance. The QUADAS-AI tool revealed that only 43% of the studies included in this systematic review were at low risk of bias concerning the standard reference domain.

CONCLUSION

This review demonstrates that the overall scientific quality of studies conducted to feed artificial intelligence algorithms is low. Some improvement in the design and validation of studies can be made with the development of a standardized guideline for the reproducibility and generalizability of results and, thus, their clinical applications.

Automatic caries detection in bitewing radiographs-Part II: experimental comparison

OBJECTIVE

The objective of this study was to compare the detection of caries in bitewing radiographs by multiple dentists with an automatic method and to evaluate the detection performance in the absence of a reliable ground truth.

MATERIALS AND METHODS

Four experts and three novices marked caries using bounding boxes in 100 bitewing radiographs. The same dataset was processed by an automatic object detection deep learning method. All annotators were compared in terms of the number of errors and intersection over union (IoU) using pairwise comparisons, with respect to the consensus standard, and with respect to the annotator of the training dataset of the automatic method.

RESULTS

The number of lesions marked by experts in 100 images varied between 241 and 425. Pairwise comparisons showed that the automatic method outperformed all dentists except the original annotator in the mean number of errors, while being among the best in terms of IoU. With respect to a consensus standard, the performance of the automatic method was best in terms of the number of errors and slightly below average in terms of IoU. Compared with the original annotator, the automatic method had the highest IoU and only one expert made fewer errors.

CONCLUSIONS

The automatic method consistently outperformed novices and performed as well as highly experienced dentists.

CLINICAL SIGNIFICANCE

The consensus in caries detection between experts is low. An automatic method based on deep learning can improve both the accuracy and repeatability of caries detection, providing a useful second opinion even for very experienced dentists.

Rapid detection of non-normal teeth on dental X-ray images using improved Mask R-CNN with attention mechanism

PURPOSE

Dental health has been getting increased attention. Timely detection of non-normal teeth (caries, residual root, retainer, teeth filling, etc.) is of great importance for people's health, well-being, and quality of life. This work proposes a rapid detection of non-normal teeth based on improved Mask R-CNN, aiming to achieve comprehensive screening of non-normal teeth on dental X-ray images.

METHODS

An improved Mask R-CNN based on attention mechanism was used to develop a non-normal teeth detection method trained on a high-quality annotated dataset, which can segment the whole mask of each non-normal tooth on the dental X-ray image immediately.

RESULTS

The average precision (AP) of the proposed non-normal teeth detection was 0.795 with an intersection-over-union of 0.5 and max detections (maxDets) of 32, which was higher than that of the typical Mask R-CNN method (AP = 0.750). In addition, validation experiments showed that the evaluation metrics (AP, recall, precision-recall (P-R) curve) of the proposed method were superior to those of the Mask R-CNN method. Furthermore, the experimental results indicated that proposed method exhibited a high sensitivity (95.65%) in detecting secondary caries. The proposed method took about 0.12 s to segment non-normal teeth on one dental X-ray image using the laptop (8G memory, NVIDIA RTX 3060 graphics processing unit), which was much faster than conventional manual methods.

CONCLUSION

The proposed method enhances the accuracy and efficiency of abnormal tooth diagnosis for practitioners, while also facilitating early detection and treatment of dental caries to substantially lower patient costs. Additionally, it can enable rapid and objective evaluation of student performance in dental examinations.

Impact of artificial intelligence on dentists' gaze during caries detection: A randomized controlled trial

OBJECTIVES

We aimed to understand how artificial intelligence (AI) influences dentists by comparing their gaze behavior when using versus not using an AI software to detect primary proximal carious lesions on bitewing radiographs.

METHODS

22 dentists assessed a median of 18 bitewing images resulting in 170 datasets from dentists without AI and 179 datasets from dentists with AI, after excluding data with poor gaze recording quality. We compared time to first fixation, fixation count, average fixation duration, and fixation frequency between both trial groups. Analyses were performed for the entire image and stratified by (1) presence of carious lesions and/or restorations and (2) lesion depth (E1/2: outer/inner enamel; D1-3 outer-inner third of dentin). We also compared the transitional pattern of the dentists' gaze between the trial groups.

RESULTS

Median time to first fixation was shorter in all groups of teeth for dentists with AI versus without AI, although p>0.05. Dentists with AI had more fixations (median=68, IQR=31, 116) on teeth with restorations compared to dentists without AI (median=47, IQR=19, 100), p = 0.01. In turn, average fixation duration was longer on teeth with caries for the dentists with AI than those without AI; although p>0.05. The visual search strategy employed by dentists with AI was less systematic with a lower proportion of lateral tooth-wise transitions compared to dentists without AI.

CONCLUSIONS

Dentists with AI exhibited more efficient viewing behavior compared to dentists without AI, e.g., lesser time taken to notice caries and/or restorations, more fixations on teeth with restorations, and fixating for shorter durations on teeth without carious lesions and/or restorations.

CLINICAL SIGNIFICANCE

Analysis of dentists' gaze patterns while using AI-generated annotations of carious lesions demonstrates how AI influences their data extraction methods for dental images. Such insights can be exploited to improve, and even customize, AI-based diagnostic tools, thus reducing the dentists' extraneous attentional processing and allowing for more thorough examination of other image areas.

Tooth caries classification with quantitative light-induced fluorescence (QLF) images using convolutional neural network for permanent teeth in vivo

BACKGROUND

Owing to the remarkable advancements of artificial intelligence (AI) applications, AI-based detection of dental caries is continuously improving. We evaluated the efficacy of the detection of dental caries with quantitative light-induced fluorescence (QLF) images using a convolutional neural network (CNN) model.

METHODS

Overall, 2814 QLF intraoral images were obtained from 606 participants at a dental clinic using Qraypen C® (QC, AIOBIO, Seoul, Republic of Korea) from October 2020 to October 2022. These images included all the types of permanent teeth of which surfaces were smooth or occlusal. Dataset were randomly assigned to the training (56.0%), validation (14.0%), and test (30.0%) subsets of the dataset for caries classification. Moreover, masked images for teeth area were manually prepared to evaluate the segmentation efficacy. To compare diagnostic performance for caries classification according to the types of teeth, the dataset was further classified into the premolar (1,143 images) and molar (1,441 images) groups. As the CNN model, Xception was applied.

RESULTS

Using the original QLF images, the performance of the classification algorithm was relatively good showing 83.2% of accuracy, 85.6% of precision, and 86.9% of sensitivity. After applying the segmentation process for the tooth area, all the performance indics including 85.6% of accuracy, 88.9% of precision, and 86.9% of sensitivity were improved. However, the performance indices of each type of teeth (both premolar and molar) were similar to those for all teeth.

CONCLUSION

The application of AI to QLF images for caries classification demonstrated a good performance regardless of teeth type among posterior teeth. Additionally, tooth area segmentation through background elimination from QLF images exhibited a better performance.

Automatic caries detection in bitewing radiographs: part I-deep learning

OBJECTIVE

The aim of this work was to assemble a large annotated dataset of bitewing radiographs and to use convolutional neural networks to automate the detection of dental caries in bitewing radiographs with human-level performance.

MATERIALS AND METHODS

A dataset of 3989 bitewing radiographs was created, and 7257 carious lesions were annotated using minimal bounding boxes. The dataset was then divided into 3 parts for the training (70%), validation (15%), and testing (15%) of multiple object detection convolutional neural networks (CNN). The tested CNN architectures included YOLOv5, Faster R-CNN, RetinaNet, and EfficientDet. To further improve the detection performance, model ensembling was used, and nested predictions were removed during post-processing. The models were compared in terms of the [Formula: see text] score and average precision (AP) with various thresholds of the intersection over union (IoU).

RESULTS

The twelve tested architectures had [Formula: see text] scores of 0.72-0.76. Their performance was improved by ensembling which increased the [Formula: see text] score to 0.79-0.80. The best-performing ensemble detected caries with the precision of 0.83, recall of 0.77, [Formula: see text], and AP of 0.86 at IoU=0.5. Small carious lesions were predicted with slightly lower accuracy (AP 0.82) than medium or large lesions (AP 0.88).

CONCLUSIONS

The trained ensemble of object detection CNNs detected caries with satisfactory accuracy and performed at least as well as experienced dentists (see companion paper, Part II). The performance on small lesions was likely limited by inconsistencies in the training dataset.

CLINICAL SIGNIFICANCE

Caries can be automatically detected using convolutional neural networks. However, detecting incipient carious lesions remains challenging.

Enhancing Caries Detection in Bitewing Radiographs Using YOLOv7

The study aimed to evaluate the impact of image size, area of detection (IoU) thresholds and confidence thresholds on the performance of the YOLO models in the detection of dental caries in bitewing radiographs. A total of 2575 bitewing radiographs were annotated with seven classes according to the ICCMS™ radiographic scoring system. YOLOv3 and YOLOv7 models were employed with different configurations, and their performances were evaluated based on precision, recall, F1-score and mean average precision (mAP). Results showed that YOLOv7 with 640 × 640 pixel images exhibited significantly superior performance compared to YOLOv3 in terms of precision (0.557 vs. 0.268), F1-score (0.555 vs. 0.375) and mAP (0.562 vs. 0.458), while the recall was significantly lower (0.552 vs. 0.697). The following experiment found that the overall mAPs did not significantly differ between 640 × 640 pixel and 1280 × 1280 pixel images, for YOLOv7 with an IoU of 50% and a confidence threshold of 0.001 (p = 0.866). The last experiment revealed that the precision significantly increased from 0.570 to 0.593 for YOLOv7 with an IoU of 75% and a confidence threshold of 0.5, but the mean-recall significantly decreased and led to lower mAPs in both IoUs. In conclusion, YOLOv7 outperformed YOLOv3 in caries detection and increasing the image size did not enhance the model's performance. Elevating the IoU from 50% to 75% and confidence threshold from 0.001 to 0.5 led to a reduction of the model's performance, while simultaneously improving precision and reducing recall (minimizing false positives and negatives) for carious lesion detection in bitewing radiographs.

Evaluation of a Decision Support System Developed with Deep Learning Approach for Detecting Dental Caries with Cone-Beam Computed Tomography Imaging

This study aims to investigate the effect of using an artificial intelligence (AI) system (Diagnocat, Inc., San Francisco, CA, USA) for caries detection by comparing cone-beam computed tomography (CBCT) evaluation results with and without the software. 500 CBCT volumes are scored by three dentomaxillofacial radiologists for the presence of caries separately on a five-point confidence scale without and with the aid of the AI system. After visual evaluation, the deep convolutional neural network (CNN) model generated a radiological report and observers scored again using AI interface. The ground truth was determined by a hybrid approach. Intra- and inter-observer agreements are evaluated with sensitivity, specificity, accuracy, and kappa statistics. A total of 6008 surfaces are determined as 'presence of caries' and 13,928 surfaces are determined as 'absence of caries' for ground truth. The area under the ROC curve of observer 1, 2, and 3 are found to be 0.855/0.920, 0.863/0.917, and 0.747/0.903, respectively (unaided/aided). Fleiss Kappa coefficients are changed from 0.325 to 0.468, and the best accuracy (0.939) is achieved with the aided results. The radiographic evaluations performed with aid of the AI system are found to be more compatible and accurate than unaided evaluations in the detection of dental caries with CBCT images.

Lesion Detection in Optical Coherence Tomography with Transformer-Enhanced Detector

Optical coherence tomography (OCT) is an emerging imaging tool in healthcare with common applications in ophthalmology for the detection of retinal diseases and in dentistry for the early detection of tooth decay. Speckle noise is ubiquitous in OCT images, which can hinder diagnosis by clinicians. In this paper, a region-based, deep learning framework for the detection of anomalies is proposed for OCT-acquired images. The core of the framework is Transformer-Enhanced Detection (TED), which includes attention gates (AGs) to ensure focus is placed on the foreground while identifying and removing noise artifacts as anomalies. TED was designed to detect the different types of anomalies commonly present in OCT images for diagnostic purposes and thus aid clinical interpretation. Extensive quantitative evaluations were performed to measure the performance of TED against current, widely known, deep learning detection algorithms. Three different datasets were tested: two dental and one CT (hosting scans of lung nodules, livers, etc.). The results showed that the approach verifiably detected tooth decay and numerous lesions across two modalities, achieving superior performance compared to several well-known algorithms. The proposed method improved the accuracy of detection by 16-22% and the Intersection over Union (IOU) by 10% for both dentistry datasets. For the CT dataset, the performance metrics were similarly improved by 9% and 20%, respectively.

Bibliometric Analysis of Context, Trends, and Contents of Digital Health Technology Used in Dental Health

Digital tools and apps are revolutionizing healthcare and provide creative answers to urgent problems. Through teamwork and the incorporation of digital technologies, dentistry has experienced a remarkable revolution. A large body of scholarly research backs up this trend. The context, trends, and content of digital health technology in oral and dental health are examined in our bibliometric analysis. Using targeted keywords and synonyms, an organized searching technique was used in the Scopus database, yielding 1942 articles that were extracted into a CSV file. To acquire insights into the content, trends, and context, visualization using VOSviewer 1.6.18 and a variety of analyses-including coauthorship, citation, cooccurrence of author keywords, bibliographic coupling, and cocitation-were executed. The analysis revealed that the USA and the UK contributed to a significant quantity of the literature, with newer contributions coming from nations like India. Cone Beam Computed Tomography, Dental Caries, and Artificial Intelligence were prominent keywords. It is important to note that BMC Oral Health was associated with a sizable number of the papers. This bibliometric analysis provides insightful information about the context, content, and trends of digital health in the field of oral and dental health. By implementing the right technology, policymakers can use this information to increase oral health, encourage dental literacy, and improve access to dental treatment. It is vital to take into account the wide variety of technologies and their classifications based on dental services and contextual variables.

ResMIBCU-Net: an encoder-decoder network with residual blocks, modified inverted residual block, and bi-directional ConvLSTM for impacted tooth segmentation in panoramic X-ray images

OBJECTIVE

Impacted tooth is a common problem that can occur at any age, causing tooth decay, root resorption, and pain in the later stages. In recent years, major advances have been made in medical imaging segmentation using deep convolutional neural network-based networks. In this study, we report on the development of an artificial intelligence system for the automatic identification of impacted tooth from panoramic dental X-ray images.

METHODS

Among existing networks, in medical imaging segmentation, U-Net architectures are widely implemented. In this article, for dental X-ray image segmentation, blocks and convolutional block structures using inverted residual blocks are upgraded by taking advantage of U-Net's network capacity-intensive connections. At the same time, we propose a method for jumping connections in which bi-directional convolution long short-term memory is used instead of a simple connection. Assessment of the proposed artificial intelligence model performance was evaluated with accuracy, F1-score, intersection over union, and recall.

RESULTS

In the proposed method, experimental results are obtained with 99.82% accuracy, 91.59% F1-score, 84.48% intersection over union, and 90.71% recall.

CONCLUSION

Our findings show that our artificial intelligence system could help with future diagnostic support in clinical practice.

Determining the reliability of diagnosis and treatment using artificial intelligence software with panoramic radiographs

Purpose

The objective of this study was to evaluate the accuracy and effectiveness of an artificial intelligence (AI) program in identifying dental conditions using panoramic radiographs (PRs), as well as to assess the appropriateness of its treatment recommendations.

Material and Methods

PRs from 100 patients (representing 4497 teeth) with known clinical examination findings were randomly selected from a university database. Three dentomaxillofacial radiologists and the Diagnocat AI software evaluated these PRs. The evaluations were focused on various dental conditions and treatments, including canal filling, caries, cast post and core, dental calculus, fillings, furcation lesions, implants, lack of interproximal tooth contact, open margins, overhangs, periapical lesions, periodontal bone loss, short fillings, voids in root fillings, overfillings, pontics, root fragments, impacted teeth, artificial crowns, missing teeth, and healthy teeth.

Results

The AI demonstrated almost perfect agreement (exceeding 0.81) in most of the assessments when compared to the ground truth. The sensitivity was very high (above 0.8) for the evaluation of healthy teeth, artificial crowns, dental calculus, missing teeth, fillings, lack of interproximal contact, periodontal bone loss, and implants. However, the sensitivity was low for the assessment of caries, periapical lesions, pontic voids in the root canal, and overhangs.

Conclusion

Despite the limitations of this study, the synthesized data suggest that AI-based decision support systems can serve as a valuable tool in detecting dental conditions, when used with PR for clinical dental applications.

Applications, functions, and accuracy of artificial intelligence in restorative dentistry: A literature review

OBJECTIVE

The applications of artificial intelligence (AI) are increasing in restorative dentistry; however, the AI performance is unclear for dental professionals. The purpose of this narrative review was to evaluate the applications, functions, and accuracy of AI in diverse aspects of restorative dentistry including caries detection, tooth preparation margin detection, tooth restoration design, metal structure casting, dental restoration/implant detection, removable partial denture design, and tooth shade determination.

OVERVIEW

An electronic search was performed on Medline/PubMed, Embase, Web of Science, Cochrane, Scopus, and Google Scholar databases. English-language articles, published from January 1, 2000, to March 1, 2022, relevant to the aforementioned aspects were selected using the key terms of artificial intelligence, machine learning, deep learning, artificial neural networks, convolutional neural networks, clustering, soft computing, automated planning, computational learning, computer vision, and automated reasoning as inclusion criteria. A manual search was also performed. Therefore, 157 articles were included, reviewed, and discussed.

CONCLUSIONS

Based on the current literature, the AI models have shown promising performance in the mentioned aspects when being compared with traditional approaches in terms of accuracy; however, as these models are still in development, more studies are required to validate their accuracy and apply them to routine clinical practice.

CLINICAL SIGNIFICANCE

AI with its specific functions has shown successful applications with acceptable accuracy in diverse aspects of restorative dentistry. The understanding of these functions may lead to novel applications with optimal accuracy for AI in restorative dentistry.

Artificial intelligence in the detection and classification of dental caries

STATEMENT OF PROBLEM

Automated detection of dental caries could enhance early detection, save clinician time, and enrich treatment decisions. However, a reliable system is lacking.

PURPOSE

The purpose of this study was to train a deep learning model and to assess its ability to detect and classify dental caries.

MATERIAL AND METHODS

Bitewings radiographs with a 1876×1402-pixel resolution were collected, segmented, and anonymized with a radiographic image analysis software program and were identified and classified according to the modified King Abdulaziz University (KAU) classification for dental caries. The method was based on supervised learning algorithms trained on semantic segmentation tasks.

RESULTS

The mean score for the intersection-over-union of the model was 0.55 for proximal carious lesions on a 5-category segmentation assignment and a mean F1 score of 0.535 using 554 training samples.

CONCLUSIONS

The study validated the high potential for developing an accurate caries detection model that will expedite caries identification, assess clinician decision-making, and improve the quality of patient care.

Detection of the pathological exposure of pulp using an artificial intelligence tool: a multicentric study over periapical radiographs

BACKGROUND

Introducing artificial intelligence (AI) into the medical field proved beneficial in automating tasks and streamlining the practitioners' lives. Hence, this study was conducted to design and evaluate an AI tool called Make Sure Caries Detector and Classifier (MSc) for detecting pathological exposure of pulp on digital periapical radiographs and to compare its performance with dentists.

METHODS

This study was a diagnostic, multi-centric study, with 3461 digital periapical radiographs from three countries and seven centers. MSc was built using Yolov5-x model, and it was used for exposed and unexposed pulp detection. The dataset was split into a train, validate, and test dataset; the ratio was 8-1-1 to prevent overfitting. 345 images with 752 labels were randomly allocated to test MSc. The performance metrics used to test MSc performance included mean average precision (mAP), precision, F1 score, recall, and area under receiver operating characteristic curve (AUC). The metrics used to compare the performance with that of 10 certified dentists were: right diagnosis exposed (RDE), right diagnosis not exposed (RDNE), false diagnosis exposed (FDE), false diagnosis not exposed (FDNE), missed diagnosis (MD), and over diagnosis (OD).

RESULTS

MSc achieved a performance of more than 90% in all metrics examined: an average precision of 0.928, recall of 0.918, F1-score of 0.922, and AUC of 0.956 (P<.05). The results showed a higher mean of 1.94 for all right (correct) diagnosis parameters in MSc group, while a higher mean of 0.64 for all wrong diagnosis parameters in the dentists group (P<.05).

CONCLUSIONS

The designed MSc tool proved itself reliable in the detection and differentiating between exposed and unexposed pulp in the internally validated model. It also showed a better performance for the detection of exposed and unexposed pulp when compared to the 10 dentists' consensus.

Gaze patterns of dentists while evaluating bitewing radiographs

OBJECTIVES

Understanding dentists' gaze patterns on radiographs may allow to unravel sources of their limited accuracy and develop strategies to mitigate them. We conducted an eye tracking experiment to characterize dentists' scanpaths and thus their gaze patterns when assessing bitewing radiographs to detect primary proximal carious lesions.

METHODS

22 dentists assessed a median of nine bitewing images each, resulting in 170 datasets after excluding data with poor quality of gaze recording. Fixation was defined as an area of attentional focus related to visual stimuli. We calculated time to first fixation, fixation count, average fixation duration, and fixation frequency. Analyses were performed for the entire image and stratified by (1) presence of carious lesions and/or restorations and (2) lesion depth (E1/2: outer/inner enamel; D1-3: outer-inner third of dentin). We also examined the transitional nature of the dentists' gaze.

RESULTS

Dentists had more fixations on teeth with lesions and/or restorations (median=138 [interquartile range=87, 204]) than teeth without them (32 [15, 66]), p<0.001. Notably, teeth with lesions had longer fixation durations (407 milliseconds [242, 591]) than those with restorations (289 milliseconds [216, 337]), p<0.001. Time to first fixation was longer for teeth with E1 lesions (17,128 milliseconds [8813, 21,540]) than lesions of other depths (p = 0.049). The highest number of fixations were on teeth with D2 lesions (43 [20, 51]) and lowest on teeth with E1 lesions (5 [1, 37]), p<0.001. Generally, a systematic tooth-by-tooth gaze pattern was observed.

CONCLUSIONS

As hypothesized, while visually inspecting bitewing radiographic images, dentists employed a heightened focus on certain image features/areas, relevant to the assigned task. Also, they generally examined the entire image in a systematic tooth-by-tooth pattern.

Deep Learning in Diagnosis of Dental Anomalies and Diseases: A Systematic Review

Deep learning and diagnostic applications in oral and dental health have received significant attention recently. In this review, studies applying deep learning to diagnose anomalies and diseases in dental image material were systematically compiled, and their datasets, methodologies, test processes, explainable artificial intelligence methods, and findings were analyzed. Tests and results in studies involving human-artificial intelligence comparisons are discussed in detail to draw attention to the clinical importance of deep learning. In addition, the review critically evaluates the literature to guide and further develop future studies in this field. An extensive literature search was conducted for the 2019-May 2023 range using the Medline (PubMed) and Google Scholar databases to identify eligible articles, and 101 studies were shortlisted, including applications for diagnosing dental anomalies (n = 22) and diseases (n = 79) using deep learning for classification, object detection, and segmentation tasks. According to the results, the most commonly used task type was classification (n = 51), the most commonly used dental image material was panoramic radiographs (n = 55), and the most frequently used performance metric was sensitivity/recall/true positive rate (n = 87) and accuracy (n = 69). Dataset sizes ranged from 60 to 12,179 images. Although deep learning algorithms are used as individual or at least individualized architectures, standardized architectures such as pre-trained CNNs, Faster R-CNN, YOLO, and U-Net have been used in most studies. Few studies have used the explainable AI method (n = 22) and applied tests comparing human and artificial intelligence (n = 21). Deep learning is promising for better diagnosis and treatment planning in dentistry based on the high-performance results reported by the studies. For all that, their safety should be demonstrated using a more reproducible and comparable methodology, including tests with information about their clinical applicability, by defining a standard set of tests and performance metrics.

Automatic recognition of teeth and periodontal bone loss measurement in digital radiographs using deep-learning artificial intelligence

Background/purpose

Artificial Intelligence (AI) can optimize treatment approaches in dental healthcare due to its high level of accuracy and wide range of applications. This study seeks to propose a new deep learning (DL) ensemble model based on deep Convolutional Neural Network (CNN) algorithms to predict tooth position, detect shape, detect remaining interproximal bone level, and detect radiographic bone loss (RBL) using periapical and bitewing radiographs.

Materials and methods

270 patients from January 2015 to December 2020, and all images were deidentified without private information for this study. A total of 8000 periapical radiographs with 27,964 teeth were included for our model. AI algorithms utilizing the YOLOv5 model and VIA labeling platform, including VGG-16 and U-Net architecture, were created as a novel ensemble model. Results of AI analysis were compared with clinicians' assessments.

Results

DL-trained ensemble model accuracy was approximately 90% for periapical radiographs. Accuracy for tooth position detection was 88.8%, tooth shape detection 86.3%, periodontal bone level detection 92.61% and radiographic bone loss detection 97.0%. AI models were superior to mean accuracy values from 76% to 78% when detection was performed by dentists.

Conclusion

The proposed DL-trained ensemble model provides a critical cornerstone for radiographic detection and a valuable adjunct to periodontal diagnosis. High accuracy and reliability indicate model's strong potential to enhance clinical professional performance and build more efficient dental health services.

A Comprehensive Review of Recent Advances in Artificial Intelligence for Dentistry E-Health

Artificial intelligence has made substantial progress in medicine. Automated dental imaging interpretation is one of the most prolific areas of research using AI. X-ray and infrared imaging systems have enabled dental clinicians to identify dental diseases since the 1950s. However, the manual process of dental disease assessment is tedious and error-prone when diagnosed by inexperienced dentists. Thus, researchers have employed different advanced computer vision techniques, and machine- and deep-learning models for dental disease diagnoses using X-ray and near-infrared imagery. Despite the notable development of AI in dentistry, certain factors affect the performance of the proposed approaches, including limited data availability, imbalanced classes, and lack of transparency and interpretability. Hence, it is of utmost importance for the research community to formulate suitable approaches, considering the existing challenges and leveraging findings from the existing studies. Based on an extensive literature review, this survey provides a brief overview of X-ray and near-infrared imaging systems. Additionally, a comprehensive insight into challenges faced by researchers in the dental domain has been brought forth in this survey. The article further offers an amalgamative assessment of both performances and methods evaluated on public benchmarks and concludes with ethical considerations and future research avenues.

Classification of Maxillofacial Morphology by Artificial Intelligence Using Cephalometric Analysis Measurements

The characteristics of maxillofacial morphology play a major role in orthodontic diagnosis and treatment planning. While Sassouni's classification scheme outlines different categories of maxillofacial morphology, there is no standardized approach to assigning these classifications to patients. This study aimed to create an artificial intelligence (AI) model that uses cephalometric analysis measurements to accurately classify maxillofacial morphology, allowing for the standardization of maxillofacial morphology classification. This study used the initial cephalograms of 220 patients aged 18 years or older. Three orthodontists classified the maxillofacial morphologies of 220 patients using eight measurements as the accurate classification. Using these eight cephalometric measurement points and the subject's gender as input features, a random forest classifier from the Python sci-kit learning package was trained and tested with a k-fold split of five to determine orthodontic classification; distinct models were created for horizontal-only, vertical-only, and combined maxillofacial morphology classification. The accuracy of the combined facial classification was 0.823 ± 0.060; for anteroposterior-only classification, the accuracy was 0.986 ± 0.011; and for the vertical-only classification, the accuracy was 0.850 ± 0.037. ANB angle had the greatest feature importance at 0.3519. The AI model created in this study accurately classified maxillofacial morphology, but it can be further improved with more learning data input.

Automatic sex estimation using deep convolutional neural network based on orthopantomogram images

Sex estimation is very important in forensic applications as part of individual identification. Morphological sex estimation methods predominantly focus on anatomical measurements. Based on the close relationship between sex chromosome genes and facial characterization, craniofacial hard tissues morphology shows sex dimorphism. In order to establish a more labor-saving, rapid, and accurate reference for sex estimation, the study investigated a deep learning network-based artificial intelligence (AI) model using orthopantomograms (OPG) to estimate sex in northern Chinese subjects. In total, 10703 OPG images were divided into training (80%), validation (10%), and test sets (10%). At the same time, different age thresholds were selected to compare the accuracy differences between adults and minors. The accuracy of sex estimation using CNN (convolutional neural network) model was higher for adults (90.97%) compared with minors (82.64%). This work demonstrated that the proposed model trained with a large dataset could be used in automatic morphological sex-related identification with favorable performance and practical significance in forensic science for adults in northern China, while also providing a reference for minors to some extent.

Visual Diagnostics of Dental Caries through Deep Learning of Non-Standardised Photographs Using a Hybrid YOLO Ensemble and Transfer Learning Model

BACKGROUND

Access to oral healthcare is not uniform globally, particularly in rural areas with limited resources, which limits the potential of automated diagnostics and advanced tele-dentistry applications. The use of digital caries detection and progression monitoring through photographic communication, is influenced by multiple variables that are difficult to standardize in such settings. The objective of this study was to develop a novel and cost-effective virtual computer vision AI system to predict dental cavitations from non-standardised photographs with reasonable clinical accuracy.

METHODS

A set of 1703 augmented images was obtained from 233 de-identified teeth specimens. Images were acquired using a consumer smartphone, without any standardised apparatus applied. The study utilised state-of-the-art ensemble modeling, test-time augmentation, and transfer learning processes. The "you only look once" algorithm (YOLO) derivatives, v5s, v5m, v5l, and v5x, were independently evaluated, and an ensemble of the best results was augmented, and transfer learned with ResNet50, ResNet101, VGG16, AlexNet, and DenseNet. The outcomes were evaluated using precision, recall, and mean average precision (mAP).

RESULTS

The YOLO model ensemble achieved a mean average precision (mAP) of 0.732, an accuracy of 0.789, and a recall of 0.701. When transferred to VGG16, the final model demonstrated a diagnostic accuracy of 86.96%, precision of 0.89, and recall of 0.88. This surpassed all other base methods of object detection from free-hand non-standardised smartphone photographs.

CONCLUSION

A virtual computer vision AI system, blending a model ensemble, test-time augmentation, and transferred deep learning processes, was developed to predict dental cavitations from non-standardised photographs with reasonable clinical accuracy. This model can improve access to oral healthcare in rural areas with limited resources, and has the potential to aid in automated diagnostics and advanced tele-dentistry applications.

Oral biosciences: The annual review 2022

BACKGROUND

The Journal of Oral Biosciences is devoted to advancing and disseminating fundamental knowledge concerning every aspect of oral biosciences.

HIGHLIGHT

This review features review articles in the fields of "Bone Cell Biology," "Tooth Development & Regeneration," "Tooth Bleaching," "Adipokines," "Milk Thistle," "Epithelial-Mesenchymal Transition," "Periodontitis," "Diagnosis," "Salivary Glands," "Tooth Root," "Exosome," "New Perspectives of Tooth Identification," "Dental Pulp," and "Saliva" in addition to the review articles by the winner of the "Lion Dental Research Award" ("Plastic changes in nociceptive pathways contributing to persistent orofacial pain") presented by the Japanese Association for Oral Biology.

CONCLUSION

The review articles in the Journal of Oral Biosciences have inspired its readers to broaden their knowledge about various aspects of oral biosciences. The current editorial review introduces these exciting review articles.

Feasibility of deep learning for dental caries classification in bitewing radiographs based on the ICCMS™ radiographic scoring system

OBJECTIVE

To evaluate the potential of deep learning models for categorization of dental caries in bitewing radiographs based on the International Caries Classification and Management System (ICCMS™) radiographic scoring system (RSS).

STUDY DESIGN

In total, 2758 annotated bitewing radiographs were randomly divided into 3 experiments to assess the ResNet-18, -50, -101, and -152. Experiment A tested 4-class ICCMS™-RSS training and validation using Carestream (CS) radiographs; experiment B tested training and validation using CS and VistaScan radiographs; experiment C tested 7-class ICCMS™-RSS training and validation using CS and VistaScan radiographs. The performance matrices and the areas under the receiver operating characteristic curves were analyzed to assess all procedures.

RESULTS

In experiment A, ResNet-50 and ResNet-152 were equally accurate (71.11%) and approximately 78% sensitive. The latter presented the highest specificity (56.90%). In experiment B, ResNet-50 presented the highest sensitivity (79.51%) but ResNet-152 had the highest specificity (60.71%). In experiment C, all models markedly underperformed in distinguishing the 7-class ICCMS™-RSS with specificities of 16.46% to 22.41%. They had fewer classification errors in the 4-class classification (28.89%-35.56%) than in the 7-class classification (42.34%-53.06%). The areas under the receiver operating characteristic curves of all models were unanimously comparable.

CONCLUSIONS

The ResNet models were able to classify dental caries according to the ICCMS™-RSS with average performances. The models underperformed in complicated classification tasks.

The U-Net Approaches to Evaluation of Dental Bite-Wing Radiographs: An Artificial Intelligence Study

Bite-wing radiographs are one of the most used intraoral radiography techniques in dentistry. AI is extremely important in terms of more efficient patient care in the field of dentistry. The aim of this study was to perform a diagnostic evaluation on bite-wing radiographs with an AI model based on CNNs. In this study, 500 bite-wing radiographs in the radiography archive of Eskişehir Osmangazi University, Faculty of Dentistry, Department of Oral and Maxillofacial Radiology were used. The CranioCatch labeling program (CranioCatch, Eskisehir, Turkey) with tooth decays, crowns, pulp, restoration material, and root-filling material for five different diagnoses were made by labeling the segmentation technique. The U-Net architecture was used to develop the AI model. F1 score, sensitivity, and precision results of the study, respectively, caries 0.8818-0.8235-0.9491, crown; 0.9629-0.9285-1, pulp; 0.9631-0.9843-0.9429, with restoration material; and 0.9714-0.9622-0.9807 was obtained as 0.9722-0.9459-1 for the root filling material. This study has shown that an AI model can be used to automatically evaluate bite-wing radiographs and the results are promising. Owing to these automatically prepared charts, physicians in a clinical intense tempo will be able to work more efficiently and quickly.

Deep Learning-Based Multiclass Instance Segmentation for Dental Lesion Detection

Automated dental imaging interpretation is one of the most prolific areas of research using artificial intelligence. X-ray imaging systems have enabled dental clinicians to identify dental diseases. However, the manual process of dental disease assessment is tedious and error-prone when diagnosed by inexperienced dentists. Thus, researchers have employed different advanced computer vision techniques, as well as machine and deep learning models for dental disease diagnoses using X-ray imagery. In this regard, a lightweight Mask-RCNN model is proposed for periapical disease detection. The proposed model is constructed in two parts: a lightweight modified MobileNet-v2 backbone and region-based network (RPN) are proposed for periapical disease localization on a small dataset. To measure the effectiveness of the proposed model, the lightweight Mask-RCNN is evaluated on a custom annotated dataset comprising images of five different types of periapical lesions. The results reveal that the model can detect and localize periapical lesions with an overall accuracy of 94%, a mean average precision of 85%, and a mean insection over a union of 71.0%. The proposed model improves the detection, classification, and localization accuracy significantly using a smaller number of images compared to existing methods and outperforms state-of-the-art approaches.