In-office bleaching with low/medium vs. high concentrate hydrogen peroxide: A systematic review and meta-analysis

Evaluating color change and hydrogen peroxide penetration in human and bovine teeth through in-office bleaching procedures

OBJECTIVE

Assess color alteration and hydrogen peroxide (HP) penetration in human and bovine teeth using various in-office bleaching protocols with different application times.

MATERIALS AND METHODS

Thirty healthy human premolars and 30 healthy bovine incisors were divided into five groups and subjected to different bleaching protocols: 2 × 15 min, 1 × 30 min, 2 × 20 min, or 1 × 40 min, with a control group for each tooth type. All teeth were treated with 35% HP gel. Color alteration was measured using digital spectrophotometry before and 1 week after bleaching. HP concentration within the pulp was determined via UV-Vis spectrophotometry. Statistical analysis included one-way ANOVA, Tukey's, and Dunnett's tests (α = 0.05).

RESULTS

All groups exhibited significant color alteration, with no statistically differences among them (p > 0.05). However, significant differences were observed when compared with their respective control groups (p < 0.05). HP penetration into the pulp was evident in all bleached teeth compared to the control groups (p < 0.05), with the 2 × 20 group showing the highest HP levels within the pulp cavity, irrespective of tooth type (p < 0.05).

CONCLUSION

A simplified 1 × 30-min protocol can be recommended as it effectively maintains color alteration and HP penetration, irrespective of whether human or bovine teeth.

CLINICAL SIGNIFICANCE

This study suggests that an in-office dental bleaching protocol using a 1 × 30-min session is recommended, as it ensures both effective color change and no increase in the amount of HP penetration.

Effect of the type of application tip for 35% hydrogen peroxide on bleaching efficacy and tooth sensitivity: A randomized clinical trial

OBJECTIVES

Evaluate the bleaching efficacy (BE) and tooth sensitivity (TS) of in-office bleaching using different application tips.

METHODS

Forty-eight participants were selected (split-mouth), one to receive bleaching with an attached brush tip and one with a conventional tip. The procedure was performed with Whiteness Automixx Plus 35%. The BE was evaluated at the beginning, weekly, one and 12 months post-bleaching with a Vita Easyshade spectrophotometer (ΔE*ab, ΔE00, and WID) and with Vita classical A1-D4 and Vita Bleachedguide shade guides units (ΔSGU). Absolute risk and intensity of TS were recorded using the Visual Analogue Scale. The equivalence of BE was analyzed using the two one-sided t-tests for paired samples. The absolute risk of TS was evaluated using the McNemar test, and the TS intensity was measured with the paired t test (α = 0.05).

RESULTS

The equivalence of BE was observed for both groups in all color evaluations (p > 0.05). A lower absolute risk and intensity of TS were observed for the attached brush tip when compared with the conventional tip (p < 0.003 and p < 0.0001).

CONCLUSION

Using an attached brush tip showed the same BE as a conventional tip. However, for the attached brush tip, there was a reduction in TS.

CLINICAL SIGNIFICANCE

The applicator-attached brush tip is recommended for in-office dental bleaching, because of the possible reduction in risk and intensity of TS.

Effect of Bleaching Agents on Composite Resins with and without Bis-GMA: An In Vitro Study

The objective was to evaluate the change in color, hardness, and roughness produced by carbamide peroxide (CP) at two different concentrations on two resins. The 16% or 45% CP was applied to 66 resin discs with and without Bis-GMA. The color was measured with a spectrophotometer, and ΔEab and ΔE00 were calculated. Microhardness tester and SEM were used. In both composites, the a* and b* coordinates tended to be red and yellow, respectively, and were significant in the Bis-GMA group (p < 0.05). The ΔEab and ΔE00 were higher in the composite with Bis-GMA, regardless of the treatment received (p < 0.05). The microhardness was reduced in both composites regardless of the PC concentration compared to the control (p < 0.05). The 45% CP reduced the microhardness in the resin group with Bis-GMA compared to 16% CP (p < 0.001) but was not significant in the resin without Bis-GMA (p = 1). An increase in roughness was directly proportional to the concentration of CP, and it was more notable in the composite without Bis-GMA. The composite with Bis-GMA showed a greater tendency to darken than the one without Bis-GMA. The surface hardness of the composite was reduced in both composites and was not influenced by CP concentration in the composite without Bis-GMA. Bleaching is a common procedure nowadays. It is important to know how CP affects composites to establish a prognosis of the treatments in terms of color change, roughness, and hardness.

Effect of Bleaching Agents on Healthy Enamel, White Spots, and Carious Lesions: A Systematic Review and Meta-Analysis

This systematic review examines studies focusing on tooth bleaching and its effects on healthy enamel or incipient caries and bacterial adhesion. The aim is to explore the impact of different bleaching agents on incipient caries lesions and healthy enamel. Clinical studies, in vitro studies, and observational studies that compared at least two groups were included. A search strategy was used to select studies from the MEDLINE via Pubmed and Scopus databases. Two evaluators performed data extraction, screening, and quality assessment independently. Only studies written in English were included. From 968 initial records, 28 studies were selected for a full-text evaluation. Of these, 7 studies were classified as cluster 1 (bacterial adherence on teeth), 12 studies as cluster 2 (no bacteria involved), 4 studies as cluster 3 (no teeth deployment), and 5 clinical studies were cluster 4. Of the selected studies, 6 (21.4%) supported increased bacterial attachment capacity and cariogenic dynamics, 4 (14.3%) decreased adhesion and cariogenic activity, 7 (25%) showed no difference, and 11 (39.3%) followed a different methodological approach and could not be categorized. The risk of bias appeared to be high, mainly because of the different methodologies in the studies, so we cannot reach a confident conclusion. Nevertheless, as far as carbamide peroxide bleaching is concerned, there does not seem to be a clinically significant alteration, neither in microorganism counts nor in enamel microstructure.

Bleaching efficacy of in-office dental bleaching with different application protocols: a single-blind randomized controlled trial

OBJECTIVE

This randomized controlled trial aimed to evaluate the equivalence in the color change, adverse effects, self-perception (AS) and the impact on oral condition (IO) of participants submitted to different application protocols of in-office dental bleaching.

MATERIALS AND METHODS

165 participants were bleached with a 35% hydrogen peroxide gel (Total Blanc Office One-Step, DFL), according to the following protocols: (1) 2 applications of 20-min each (2 × 20 min); (2) 1 × 40-min and; (3) 1 × 30-min. The color change was evaluated with the Vita Easyshade spectrophotometer, Vita Classical and Vita Bleachedguide scales. The intensity and risk of tooth sensitivity (TS) and gingival irritation (GI) were recorded using a 0-10 visual analogue scale (VAS). AS and IO was assessed before and after the bleaching procedure using the Orofacial Aesthetic Scale and Oral Health Impact Profile-14, respectively.

RESULTS

Equivalent color change were observed (p < 0.001), with no significant difference between groups. The group 2 × 20 min presented the highest risk of TS (76%, 95% CI 63 to 85), compared to the 1 × 30 min (p < 0.04). The intensity of TS and GI and the risk of GI was similar between groups (p > 0.31). Irrespectively of the group (p = 0.32), significant improvements were observed for all items of AS and IO after bleaching (p < 0.02).

CONCLUSIONS

The 1 × 30 min protocol produced equivalent color change to the other bleaching protocols with reduced risk of TS and shorter application time.

CLINICAL RELEVANCE

A more simplified application regimen of a single application of 30 min yields effective bleaching and patient satisfaction while minimizing undesirable side effects and improving patient satisfaction.

In-office Bleaching Activated With Violet LED: Effect on Pulpal and Tooth Temperature and Pulp Viability

OBJECTIVES

This study evaluated the influence of hydrogen peroxide (HP) with or without titanium dioxide nanotubes (TiO2) associated with violet LED (VL) regarding: a) the temperature change in the pulp chamber and facial surface; b) the decomposition of HP; and c) the cytotoxicity of the gels on pulp cells.

METHODS AND MATERIALS

The experimental groups were: HP35 (35% HP/Whiteness HP, FGM); HP35+VL; HP35T (HP35+TiO2); HP35T+VL; HP7 (7.5% HP/White Class 7.5%, FGM); HP7+VL; HP7T (HP7+TiO2); and HP7T+VL. TiO2 was incorporated into the bleaching gels at 1%. Eighty bovine incisors were evaluated to determine temperature change in 8 experimental groups (n=10/group). A k-type thermocouple was used to evaluate the temperatures of the facial surface and in the pulp chamber, achieved by enabling endodontic access to the palatal surface, throughout the 30-minute session. HP decomposition (n=3) of gels was evaluated by using an automatic potentiometric titrator at the initial and 30-minute time points. Trans-enamel and trans-dentinal cell viability were assessed with a pulp chamber device as well as enamel and dentin discs (n=6), and the treatment extracts (culture medium + diffused components) were collected and applied to MDPC-23 odontoblast cells to evaluate cell viability according to the MTT test.

RESULTS

A temperature increase in the pulp chamber was observed in the presence of VL at 30 minutes (p<0.05) (Mann-Whitney test). Also at 30 minutes, HP35 showed greater decomposition in the presence of VL rather than in its absence (p<0.05) (mixed linear models and the Tukey-Kramer test). HP7 provided greater cell viability than the groups treated with HP35 (p<0.05) (generalized linear models test). Cell viability was significantly lower for HP7 in the presence of VL (p<0.05).

CONCLUSION

Pulpal temperature increased with VL (maximum of 1.9°C), but did not exceed the critical limit to cause pulp damage. Less concentrated HP resulted in higher cell viability, even when associated with VL.

Tooth whitening: current status and prospects

As a safe, effective, economical, and convenient technique, tooth whitening is one of the most popular treatments for improving tooth discoloration. This review summarizes the theoretical and recent research developments in the classification and mechanisms of tooth discoloration, as well as the principles, agents, effects, and side effects of tooth whitening techniques. The aim is to provide a basis for the clinical treatment of tooth whitening techniques and to suggest possible new ideas for further research. The accepted mechanism of whitening is the redox reaction of oxides in the whitening reagent, and the whitening effect is remarkable. However, side effects such as tooth sensitivity and irritation of gum and other oral soft tissues can still occur. It is recommended that more monitoring be carried out in the clinic to monitor these side effects, and care should be taken to protect the soft tissues in the mouth during office whitening procedures. Furthermore, there is a need to develop new additives or natural whitening products to reduce the occurrence of side effects.

Whitening efficacy of activated charcoal-based products: A single-blind randomized controlled clinical trial

OBJECTIVE

This randomized controlled clinical trial evaluated the whitening efficacy, tooth sensitivity (TS), and volunteers' satisfaction following the use of activated charcoal powder and toothpaste.

METHODS

Fifty-six volunteers were randomly allocated into 4 groups (n = 14) according to a 14-day toothbrushing or whitening treatment with activated charcoal powder (ACPW), activated charcoal toothpaste (ACT), regular fluoridated toothpaste (RT), and 10 % carbamide peroxide (CP). Objective (ΔE00) and subjective (ΔSGU) color and whiteness index (ΔWID) changes were calculated. Patients self-reported the risk and intensity of TS using a visual analogue scale and the volunteer's satisfaction was determined by a questionnaire. Color assessments were analyzed by Kruskal-Wallis followed by Dwas-Steel-Crithlow-Fligner, and absolute TS risk and volunteer's satisfaction by Fisher exact test (p < 0.05).

RESULTS

ACPW and ACT promoted similar effects in ΔE00, ΔSGU, and ΔWID to that observed for RT. No significant difference was found in terms of TS risk intensity. TS risk became high after 7 and 14 days, with higher TS prevalence in CP. Volunteers reported that ACPW exhibited the lowest ease-of-use, comfort, and whitening satisfaction among groups (p < 0.05).

CONCLUSION

Activated charcoal-based products presented a minor and unsatisfactory whitening effect while CP resulted in optimal tooth whitening and the highest level of satisfaction among volunteers. Risk was higher from 7 days onwards and was more pronounced in the CP.

CLINICAL RELEVANCE

Based on the whitening effect and patient satisfaction, this controlled-randomized clinical evidence supports that the use of activated charcoal-based products should be discouraged.

In-office dental bleaching in adolescents using 6% hydrogen peroxide with and without gingival barrier: a randomized double-blind clinical trial

BACKGROUND

At low concentrations used for in-office bleaching gels, such as 6% HP, gingival barrier continues to be performed. If we take into account that, in the at-home bleaching technique, no barrier is indicated, it seems that the use of a gingival barrier fails to make much sense when bleaching gel in low concentration is used for in-office bleaching.

OBJECTIVE

This double-blind, split-mouth, randomized clinical trial evaluated the gingival irritation (GI) of in-office bleaching using 6% hydrogen peroxide (HP) with and without a gingival barrier in adolescents, as well as color change and the impact of oral condition on quality of life.

METHODOLOGY

Overall, 60 participants were randomized into which side would or would not receive the gingival barrier. In-office bleaching was performed for 50 minutes with 6% HP in three sessions. The absolute risk and intensity of GI were assessed with a visual analogue scale. Color change was assessed using a digital spectrophotometer and color guides. The impact of oral condition on quality of life was assessed using the Brazilian version of the Oral Health Impact Profile (α=0.05).

RESULTS

The proportion of patients who presented GI for the "with barrier" group was 31.6% and for the "without barrier" group, 30% (p=1.0). There is an equivalence for the evaluated groups regarding GI intensity (p<0.01). Color change was detected with no statistical differences (p>0.29). There was a significant impact of oral condition on quality of life after bleaching (p<0.001).

CONCLUSIONS

The use or not of the gingival barrier for in-office bleaching with 6% HP was equivalent for GI, as well as for bleaching efficacy, with improvement in the impact of oral condition on quality of life.

Effect of antioxidant on tooth sensitivity after bleaching

OBJECTIVES

This study aimed to investigate the effect of antioxidant (sodium ascorbate) on tooth sensitivity after two in-office bleaching techniques (light-activated and chemical bleaching).

MATERIALS AND METHODS

Ten patients aged 18-25 were bleached in four groups according to bleaching materials and/or antioxidant used. Group A: Maxillary right quadrant received light-activated bleaching with antioxidant. Group B: Maxillary left quadrant received light-activated bleaching without antioxidant. Group C: Mandibular right quadrant received chemical bleaching without antioxidant. Group D: Mandibular left quadrant received chemical bleaching with antioxidant. The tooth sensitivity was recorded using Numerical Rating Scale (NRS) and Schiff Scale (SS) immediately after treatment, 1 day, 1 week, 2 weeks, and 1 month follow-up periods.

RESULTS

Group B exhibited higher sensitivity values than Group A. This difference was statistically significant on the first day after treatment (p = 0.027* in NRS and p = 0.046* in SS). Furthermore, antioxidant incorporation in Group D led to a reduction in teeth sensitivity values compared to Group C. This disparity was highly significant on the first day after treatment (p = 0.001* in NRS and p < 0.001** in SS).

CONCLUSIONS

The antioxidant (10% sodium ascorbate) reduces the intensity of tooth sensitivity at the different follow-up periods, especially after 1 day from bleaching.

CLINICAL SIGNIFICANCE

Using 10% sodium ascorbate after bleaching is advisable to reduce post-operative tooth sensitivity.

Low and high hydrogen peroxide concentrations of in-office dental bleaching associated with violet light: an in vitro study

OBJECTIVES

This study aims to assess hydrogen peroxide (HP) penetration within the pulp chamber, color change (CC), physical-chemical properties, and temperature using in-office different concentration bleaching gels with or without violet light.

MATERIALS AND METHODS

Fifty teeth were divided into five groups (n = 10) based on the HP concentration bleaching gels used (6% and 35%) and the used violet light (with or without). HP penetration within the pulp chamber was measured using UV-Vis. The CC was evaluated with a digital spectrophotometer. Initial and final concentration, and pH were measured through titration, and a Digital pHmeter, respectively. Temperature analyses were measured through a thermocouple. Statistical analysis included two-way ANOVA, Tukey's, and Dunnett's test (α = 0.05).

RESULTS

The presence of violet light did not affect the amount of HP within the pulp chamber, or the CC (p > 0.05). Greater penetration of HP was observed within the pulp chamber, as well as CC when using 35% HP (p < 0.05). The final concentration of both gels was lower than the initial concentration, regardless of the use of violet light (p < 0.05). The initial and final pH levels remained neutral and stable (p > 0.05). The pulp temperature increased when the gels were used in conjunction with violet light (p < 0.05).

CONCLUSIONS

Using violet light in conjunction with 6% or 35% HP does not alter the physical properties of the bleaching agents, the penetration of HP or enhance color change. However, an increase in temperature was observed when violet light was applied associated with bleaching gels.

CLINICAL RELEVANCE

While the simultaneous use of violet light with hydrogen peroxide 6% or 35% does not alter the material's properties, it also does not bring benefits in reducing hydrogen peroxide penetration and improving color change. Furthermore, the use of violet light increases pulp temperature.

Comparison of in-office and at-home bleaching techniques: An umbrella review of efficacy and post-operative sensitivity

Objectives

The objective of this umbrella review is to evaluate the efficacy and adverse effects of different teeth whitening techniques in-office (IO) and at-home (AH), regarding chromatic changes and teeth sensitivity.

Materials and methods

The search was carried out from several databases. The included studies were all systematic reviews with or without meta-analysis of RCT or quasi-RCT. The participants were patients that underwent external dental bleaching in permanent vital teeth. The interventions were in-office (IO) bleaching techniques and at-home (AT) bleaching techniques with different bleaching agents and concentrations.

Results

The search resulted in a total of 257 articles, and 28 SR were included in the qualitative analysis and nine in the quantitative analysis. There is no difference between in-office and at-home techniques in terms of color change (p = 0.95) and post-treatment sensitivity (p = 0.85). There is similarity risk and intensity of teeth sensitivity between AH and IO bleaching. IO bleaching with light-activated systems with low concentrations of bleaching agent showed similar results to IO bleaching techniques with high concentrated bleaching gels. With the application of the criteria of the AMSTAR 2 tool, the reviews were considered critically low to high.

Conclusions

There are no significant differences in terms of color change between the different bleaching techniques compared. Teeth sensitivity is always present regardless of the technique used. The use of light activation systems did not increase the intensity and risk of post-operative sensitivity.

At-home bleaching versus whitening toothpastes for treatment of tooth discoloration: a cost-effectiveness analysis

OBJECTIVES

This study aimed to analyze the cost-effectiveness of whitening toothpastes and at-home bleaching for the treatment of tooth discoloration.

METHODOLOGY

A cost-effectiveness economic analysis was conducted, and eight randomized clinical trials were selected based on the whitening agent product used: blue covarine dentifrices (BCD), hydrogen peroxide dentifrices (HPD), dentifrices without bleaching agents (CD, negative control), and 10% carbamide peroxide (CP10, positive control) for at-home bleaching. The consumer/patient perspective was adopted, macro-costing techniques were used and a decision tree model was performed considering the costs in the American and Brazilian markets. The color change evaluation (ΔE*ab) was used to calculate the effectiveness of tooth bleaching. A probabilistic analysis was performed using a Monte Carlo simulation and incremental cost-effectiveness ratios were obtained.

RESULTS

CP10 resulted in the highest cost-effectiveness compared to the use of dentifrices in both markets. In Brazil, HPD was more cost-effective than BCD and CD. In the US, the increased costs of HPD and BCD did not generate any whitening benefit compared to CD.

CONCLUSIONS

CP10 was more cost-effective than BCD and HPD for tooth bleaching from the perspectives of the Brazilian and American markets. Decision-making should consider the use of CP10 for treating tooth discoloration.

Effects of enamel moistening and repositioning guide color on tooth whitening outcomes: A clinical trial

This clinical trial investigated the effects of pre-application enamel moistening on the impact of a 37% carbamide peroxide whitener on tooth color changes and the influence of repositioning guide colors. Forty participants were randomly assigned to in-office tooth bleaching with either moistened enamel (experimental) or dry enamel (control). The whitener was applied for 45 min over two sessions. Tooth color was visually measured or assessed using a spectrophotometer with purple or green silicone guides. Tooth bleaching was assessed using CIE76 (ΔEab ) and CIEDE2000 (ΔE00 ) formulas and by whitening and bleaching index score changes. Moistening the enamel did not significantly affect tooth color. However, the guide color choice only impacted tooth color when measured instrumentally. At baseline, the green guide resulted in statistically significantly whiter teeth than the purple guide. Less pronounced differences in the b* coordinate between baseline and final measurements were found using the green guide. The green guide also produced lower ΔEab values and less change in indexes. In conclusion, moistening the enamel did not significantly impact tooth color changes. However, the repositioning guide color influenced the tooth bleaching measured instrumentally, except for ΔE00 .

Influence of blue and violet LED and infrared laser on the temperature of bleaching protocols in different concentrations of hydrogen peroxide

BACKGROUND

The photo-acceleration of bleaching gels by lights has been extensively researched. However, the induced temperature increase during this process needs to be further evaluated to prevent damage to the dental pulp. Therefore, the objective of this study was to evaluate the surface and intrapulpal temperature kinetics of different concentrations of hydrogen peroxide (HP) gels photo-accelerated by blue or violet light and infrared laser.

METHODS

The whitening gels at concentrations of HP35, HP15, and HP6 % were irradiated with blue and violet LED/laser on the surface of a human canine tooth. The surface temperature variation (∆Ts) was evaluated using a pH meter, while the intrapulpal temperature variation (∆Ti) was assessed using a digital thermometer at intervals of 1, 15, and 30 min. Statistical analysis was conducted using a Two-way repeated measures ANOVA test, and Bonferroni post-test was applied at a significance level of 5 %.

RESULTS

All violet LED photo-accelerated groups showed a higher increase in ∆Ts compared to the blue LED/laser groups. However, there were no significant differences between the groups for ∆Ti.

CONCLUSION

Although the photo-acceleration of HP35 and HP15 % gels with violet LED/laser has a greater increase in surface temperature compared to HP6 % gel, the different light systems do not significantly increase the intrapulpal temperature.

Catalysis-based approaches with biopolymers and violet LED to improve in-office dental bleaching

This in vitro experimental investigation aimed to evaluate the impact of the combined application of a nanofiber scaffold (NS), a polymeric catalyst primer (PCP) containing 10 mg/mL of heme peroxidase enzyme, and violet LED (LEDv) on the esthetic efficacy (EE), trans-amelodentinal cytotoxicity (TC), and procedural duration of conventional in-office bleaching therapy. To achieve this, 96 standardized enamel/dentin discs were individually placed in artificial pulp chambers. A 35% hydrogen peroxide (H2O2) bleaching gel was administered for 45, 30, or 15 min to the enamel, either previously coated with NS + PCP or left uncoated, followed by irradiation with LEDv for 15 min or no irradiation. The established groups were as follows: G1, negative control (no treatment); G2, 35% H2O2/45 min; G3, NS + PCP + LEDv; G4, NS + PCP + 35%H2O2/45 min + LEDv; G5, NS + PCP + 35%H2O2/30 min + LEDv; and G6, NS + PCP + 35%H2O2/15 min + LEDv. Extracts (culture medium + gel components diffused through the discs) were collected and applied to odontoblast-like MDPC-23 cells. EE (ΔE00 and ΔWI) and TC were assessed using ANOVA/Tukey analysis (p < 0.05). The EE analysis revealed no statistical differences between G6 and G2 (p > 0.05). Cells in G6 exhibited higher viability and lower oxidative stress compared to other bleached groups (p < 0.05). In conclusion, employing NS + PCP + LEDv to catalyze a 35%H2O2 bleaching gel applied for 15 min to the enamel resulted in successful esthetic improvements and reduced the cytotoxicity commonly linked with traditional in-office bleaching procedures.

Effect of incorporation of calcium polyphosphate sub-microparticles in low-concentration bleaching gels on physical properties of dental enamel

AIM

To evaluate the bleaching efficacy and effects on enamel properties of experimental gels with carbamide peroxide (CP; 10%) or hydrogen peroxide (HP; 6%) containing calcium polyphosphate sub-microparticles (CaPPs).

METHODS

A total of 216 bovine tooth specimens were divided for microhardness and color analyses (n = 108) and block randomized into nine groups (n = 12): (G1) commercial CP (Whiteness Perfect, FGM; Brazil); (G2) experimental CP; (G3) CP-0.5%CaPPs; (G4) CP-1.5%CaPPs; (G5) commercial HP (Potenza Bianco, PHS; Brazil); (G6) experimental HP; (G7) HP-0.5%CaPPs; (G8) HP-1.5%CaPPs; (G9) artificial saliva. The gels' pH values were determined with a bench pH meter. Color (ΔE, ΔE00, ΔWID) and microhardness variation were evaluated before and after the therapy. Part of the specimens used for microhardness was submitted to the scanning electron microscopy (SEM) (n = 3) and energy-dispersive X-ray spectroscopy EDX (n = 3) analyses. Statistical analyses were performed in the R statistical software (α = 0.05). Linear mixed models for repeated measures in time were used to analyze microhardness and L* values. Generalized linear models were used to analyze the a*, b*, ΔE, ΔE00, and ΔWID, considering a group effect. The EDX data were analyzed using a one-way ANOVA with Tukey's test.

RESULTS

The gels' pH remained over 6,0. All gels effectively bleached the specimens and did not differ significantly. When compared to the control group, the hardness was significantly lower in the G1, G2, G6, and G7 groups. The G3, G4, G5, and G8 groups did not differ significantly (p > 0.05).

CONCLUSION

The incorporation of CaPPs in low-concentration whitening gels reduces its negative effects on microhardness without interfering with their bleaching efficacy.

Effects of the application of sodium ascorbate after in-office bleaching on the penetration of hydrogen peroxide, color change, and microtensile bond strength

This study aimed to evaluate the effects of the application of 10% sodium ascorbate (SA) after in-office bleaching on the penetration of hydrogen peroxide (HP) into the pulp chamber, color change, and microtensile bond strength (µTBS) to the resin-enamel interface. Thirty premolars and thirty molars were randomly divided into three groups (n = 20 each). One group was exposed to deionized water (negative control). The other two groups were bleached with 35% HP in a single session for 3x15 minutes for each application. However, in only one of them, SA was applied for 10 minutes after bleaching. After, the concentration (µg/mL) of HP in each pulp chamber was evaluated by UV-Vis spectrophotometry. Color changes (ΔEab, ΔE00, and ΔWID) were evaluated with a digital spectrophotometer before and in the first week after bleaching. After treatment, molars were restored and sectioned to obtain resin-enamel interface sticks for µTBS at a crosshead speed of 1 mm/min until failure. The HP concentration and µTBS data were analyzed using one-way ANOVA and Tukey tests, and color changes were analyzed by t-tests (α = 0.05). SA application significantly improved the µTBS values and reduced the HP concentrations within the pulp chambers (p < 0.0001). The application of SA significantly interfered with the color changes after bleaching when compared to the control group (p < 0.05). Application of 10% SA after in-office bleaching successfully reduced the penetration of HP into the pulp chamber; however, it decreased color change.

An In Vitro Study regarding the Wear of Composite Materials Following the Use of Dental Bleaching Protocols

Composite materials used in dental restorations are considered resistant, long-lasting and aesthetic. As the wear of restorations is an important element in long-term use, the aim of this study was to evaluate the surface condition of nanohybrid and microfilled composite resins, after being subjected to the erosive action of dental bleaching protocols. This paper reflects a comparative study between one nanofilled composite and three microfilled composites used in restorations. For each composite, three sets of samples (under the form of composite discs) were created: a control group, an "office bleach" group with discs bleached with 40% hydrogen peroxide gel, and a "home bleach" group with discs bleached with 16% carbamide peroxide gel. Wear was numerically determined as the trace and the coefficients of friction obtained using a tribometer, the ball-on-disk test method, and two balls: alumina and sapphire. For all composite groups, there were statistically significant differences between the wear corresponding to the control and bleaching groups, for both testing balls. Regarding the composite type, the largest traces were recorded for GC Gradia direct anterior, for all groups, using the alumina ball. In contrast, for the sapphire ball, 3M ESPE Filtek Z550 was characterized by the largest traces. With respect to the friction coefficients, the "office bleach" group recorded the largest values, no matter the composite or the ball type used. The 3M ESPE Valux Plus composite recorded the largest friction coefficients for the alumina ball, and 3M ESPE Filtek Z550 for the sapphire ball. Overall, the "office bleach" group was characterized by higher composite wear, compared to the "home bleach" protocol or control group. Nanofilled composite resins showed superior wear resistance to microfilled resins after undergoing a bleaching protocol.

Bleaching Gels Used After 1 Week of Mixing: Efficacy, Hydrogen Peroxide Penetration, and Physical-chemical Properties

OBJECTIVES

This in vitro study aimed to evaluate the bleaching efficacy (BE), hydrogen peroxide penetration into the pulp chamber (HPP), and physical-chemical properties (concentration, pH, and viscosity) of in-office bleaching gels immediately and after 1 week of mixing.

METHODS AND MATERIALS

We randomly divided 49 premolars into seven groups: control (no bleaching) and the following in-office bleaching (Opalescence Boost 40%, Total Blanc One Step 35%, and Whiteness HP Blue 35%) applied at two storage times: immediately and after 1 week. We evaluated the BE using a digital spectrophotometer and the HPP through UV-Vis spectroscopy. We measured the initial concentration, pH, and viscosity using titration, a Digital pH meter and Rheometer, respectively. For statistical analysis, we used a twoway analysis of variance and Tukey and Dunnet tests (α=0.05).

RESULTS

We observed higher BE and HPP for Opalescence Boost and Total Blanc One Step after 1 week of mixing than for Whiteness HP Blue (p<0.001). We observed a significantly lower initial concentration for Whiteness HP Blue 1 week after mixing compared to immediately (p=0.00001). All bleaching gels showed a decrease in pH after 1 week of mixing (p=0.00003). However, Total Blanc One Step had a lower pH at both evaluation times (p<0.001). Only Opalescence Boost maintained viscosity 1 week after mixing.

CONCLUSIONS

Opalescence Boost was the only bleaching gel able to keep bleaching efficacy, with the same characteristics of permeability and physical- chemical properties after 1 week of mixing.

Whitening efficacy and tooth sensitivity in a combined in-office and at-home whitening protocol: A randomized controlled clinical trial

OBJECTIVE

This controlled randomized clinical trial determined the whitening efficacy and the intensity and absolute risk of tooth sensitivity in dual whitening when prefilled at-home whitening trays were used between in-office whitening intervals.

MATERIALS AND METHODS

An in-office whitening agent containing 35% hydrogen peroxide was used. A prefilled tray with a whitening agent containing 6% hydrogen peroxide was used for at-home whitening. Sixty-six subjects were randomly assigned to three groups. Group I: at-home whitening was performed 10 times between the in-office whitening treatments. Group II: at-home whitening was performed five times between the in-office whitening treatments. Group III: only in-office whitening was performed. The tooth color changes were evaluated using a spectrophotometer. A visual analog scale was used to express the pain intensity.

RESULTS

All the groups showed increased ΔE*ab, ΔE00 , and ΔWID with increased whitening sessions. Group I at the 3rd whitening session showed significantly higher ΔE*ab, ΔE00 , and ΔWID than group III. Tooth sensitivity showed higher values up to 24 h after whitening.

CONCLUSIONS

Although dual whitening with the prefilled tray and in-office whitening had higher whitening ability than in-office whitening alone, the intensity and absolute risk of tooth sensitivity was similar.

CLINICAL RELEVANCE

The dual whitening might produce faster and stronger whitening effects than in-office whitening alone.

Hypochlorous Acid as a Potential Postsurgical Antimicrobial Agent in Periodontitis: A Randomized, Controlled, Non-Inferiority Trial

BACKGROUND

Hypochlorous acid (HOCl) is an antimicrobial agent with high affinity to Gram-negative bacteria of the subgingival biofilm. It could have an equivalent or no inferiority effect to chlorhexidine (CHX) to avoid recolonization of these microorganisms after the post-surgical period.

OBJECTIVE

The objective is to compare the reduction of plaque index (PI), gingival index (GI), pocket depth (PD), gain of clinical attachment level (CAL), and bacterial recolonization of periodontopathic microorganisms in subgingival biofilm at 7, 21, and 90 days after Open Flap Debridement (OFD) under two antimicrobial protocols: (A) HOCl 0.05% followed by HOCl 0.025% and (B) CHX 0.2%/CHX 0.12% used per 21 days without regular oral hygiene during the post-surgical period.

MATERIAL AND METHODS

A no-inferiority randomized controlled trial was carried out. Thirty-two patients were randomly divided to receive each antiplaque protocol after OFD in patients with periodontitis. Clinical indexes and bacterial recolonization were assessed using qPCR for up to 90 days. Data were analyzed using repeated measures ANOVA, mixed effects models adjusted for treatment, time, and the Chi-squared/Fisher test. A no-inferiority analysis was also performed using the Hodges-Lehmann hypothesis test for non-inferiority.

RESULTS

HOCl was not inferior to CHX in reducing PI. Both groups showed a comparable reduction of recolonization for Porphyromonas gingivalis, Tannerella forsythia, and Eubacterium nodatum. However, the HOCl protocol was non-inferior to the CHX protocol for Treponema denticola and Aggregatibacter actinomicetemcomitans.

CONCLUSIONS

HOCl improved periodontal healing. HOCl showed an impact in reducing the recolonization of periodontopathic bacteria in the postoperative period.

Can all highly concentrated in-office bleaching gels be used as a single-application?

OBJECTIVE

This in vitro study aims to evaluate of hydrogen peroxide (HP) diffusion into the pulp chamber, bleaching efficacy (BE), and pH stability (pH) of single-application high concentrated in-office bleaching gels.

MATERIALS AND METHODS

Eighty-eight healthy premolars were randomly into eleven groups (n = 8) according to the in-office dental bleaching: DSP White Clinic 35% calcium (DW), Nano White 35% (NW), Opalescence XTra Boost 40% (OB), Pola Office + 37.5% (PO), Potenza Bianco Pro SS 38% (PB), Total Blanc 35% (TB), Total Blanc One-Step 35% (TO), Whiteness Automixx 35% (WA), Whiteness Automixx Plus 35% (WP), and Whiteness HP Blue 35% (WB). A group not exposed to bleaching agents was the control group (CG). All bleaching agents were applied in one session with a single application. After the bleaching procedure, the concentration of HP diffusion (μg/mL) into the pulp chamber was assessed using UV-Vis spectrophotometry. The BE (ΔEab and ΔE00) was evaluated before and 1 week after the bleaching procedure using a digital spectrophotometer. The pH of each bleaching gel was evaluated by digital pHmeter. The one-way ANOVA and Tukey's was used for a statistical analysis (α = 0.05).

RESULTS

The concentration of HP diffusion into the pulp chamber was higher in all in-office bleaching gels when compared to CG (p < 0.0000001). However, there are a significant difference between them (p = 0.0001). A significant BE was observed in all in-office bleaching gels (p < 0.0001 for ΔEab and ΔE00), with a significant difference between them (p < 0.0001). PO, OB, TB, WP, and WB showed a higher BE when compared to DW, PB, and WA (p < 0.0001). Most bleaching gels were slightly acidic or alkaline during the total application time, while DW, PB, TB, and WA showed a high acidic behavior after 30 min of application.

CONCLUSIONS

A single application was able to produce a bleaching efficacy. However, usually, gels with slightly acidic or alkaline pH during the application time reduces the HP diffusion into the pulp chamber.

CLINICAL RELEVANCE

The single-application of bleaching gels with slightly acidic or alkaline and stable pH decreased the penetration of hydrogen peroxide into the pulp chamber in in-office bleaching and maintained the bleaching efficacy.

Continuous vs fractionated violet LED light protocols for dental bleaching: evaluations of color change and temperature of the dental pulp and buccal surface

BACKGROUND

Dental color change and the temperature of the pulp chamber and of the buccal surface were evaluated during bleaching with 37% carbamide peroxide (CP) with continuous vs fractionated violet LED light protocols.

METHODOLOGY

Bovine incisors received in-office bleaching for 30 minutes using different light protocols (Bright Max Whitening, MMOptics). Teeth were separated into groups (n=10): HP) 35% hydrogen peroxide (Whiteness HP, FGM)/no light; CP) 37% carbamide peroxide (Whiteness SuperEndo, FGM)/no light; CP10) CP+10 min of continuous light; CP20) CP+20 min of continuous light; CP30) CP+30 min of continuous light; CPF) CP+20 cycles of 60 s light / 30 s no light (fractionated). Color evaluations were performed at different times. Evaluations of pulp and buccal surface temperatures were performed before and throughout the 30 minutes of bleaching.

RESULTS

Generalized linear models for repeated measures over time were applied to the data (α=5%). After the 1st session, CP20 and CP30 had significantly lower b* values ​​than CP and CP10 (p=0.0071). For ΔE_ab and ΔE₀₀, CPF, CP20 and CP30 showed the highest color change among the treatments after the third bleaching (p<0.05). For temperature evaluations, CP30 showed higher pulp and buccal surface temperatures than the other protocols (p<0.0001) after 20 min.

CONCLUSION

Fractionated or continuous application of violet LED for 20 or 30 min leads to greater effectiveness of color change. All protocols with the application of LED led to an increase in pulp and buccal surface temperatures during bleaching, although the fractionated application appeared to be safer than the use of continuous light.

Microstructural effect of different concentrations of hydrogen peroxide photoactivated with LED/laser

BACKGROUND

The use of different concentrations of hydrogen peroxide (HP) photoactivated with LED/laser sources is recurrent; however, their influence on tooth structure is not yet fully elucidated. This study aimed to evaluate the pH, microhardness and surface roughness of different bleaching protocols photoactivated with LED/laser.

METHODS

Forty bovine incisors were sectioned (7×7×2mm) and randomized into four groups for analysis of pH (n=5), microhardness and roughness (n=10): HP35, HP6_L, HP15_L, HP35_L. The pH analysis was performed in the initial and final minute of the bleaching protocol. Microhardness and roughness were evaluated before and 7 days after the last bleaching session. Results were obtained from two-way ANOVA for repeated measures and Bonferroni post-test at a significance level of 5%.

RESULTS

HP6_L showed higher pH and greater stability between the initial and final evaluations, while the other groups showed similar pH with reduced values in the intragroup evaluation. No differences between groups in microhardness and roughness evaluations were observed.

CONCLUSIONS

Although HP6_L showed higher alkalinity and pH stability, none of the protocols reduced the microhardness and surface roughness of bovine enamel.

Influence of violet LED and fluoride-containing carbamide peroxide bleaching gels on early-stage eroded/abraded teeth

PURPOSE

This study evaluated enamel with early-stage erosion/abrasion following bleaching with 20% and 45% carbamide peroxide (CP) gels containing fluoride (F) and irradiated with violet LED (LED).

METHODS

Enamel blocks were immersed in 1% citric acid (5 min) and artificial saliva (120 min) three times to produce early-stage enamel erosion. Simulated toothbrushing was performed only after the first saliva immersion, to provoke enamel abrasion. The erosive/abraded enamel samples were submitted to (n=10): LED/CP20, CP20, LED/CP20_F, CP20_F, LED/CP45, CP45, LED/CP45_F, CP45_F, LED, and control (without treatment). The pH of the gels was assessed, and color (ΔE₀₀) and whiteness index (ΔWI_D) changes were calculated after cycling (T₁), and 7 days from bleaching (T₂). Enamel surface roughness average (Ra) and Knoop microhardness (kg/mm², %SHR) were evaluated at baseline (T₀) at T₁ and T_2. Scanning electron microscopy evaluated the enamel surface morphology at T₂.

RESULTS

The gels' pH was neutral and CP20 and CP45 exhibited no differences in ΔE₀₀ and ΔWI_D (p>0.05) but LED increased these parameters for CP20_F and CP45. Erosion/abrasion significantly decreased mean kg/mm², and the LED group was the only one not increasing microhardness after bleaching (p>0.05). None of the groups fully recovered the initial microhardness. All groups exhibited %SHR similar to the control (p>0.05) and the increase in Ra was detected only after erosion/abrasion. CP20_F groups exhibited a more preserved enamel morphology.

CONCLUSION

Light irradiation combined with low-concentrated CP gel promoted a bleaching effect comparable to the high-concentrated CP. The bleaching protocols did not adversely impact the surface of early-stage eroded/abraded enamel.

Partial Ceramic Veneer Technique for Challenging Esthetic Frontal Restorative Procedures

Frontal darkened teeth have shown to be one of the most challenging treatments for esthetic dentistry in recent years. This case report, along with a 30-month follow-up, describes the application of a partial ceramic veneer, restricted to the mid-cervical third region, made in the upper left central incisor darkened by trauma. The procedure consisted of maintenance of the entire incisal face, as well as esthetic and morphological rehabilitation of the smile line with veneers and ultra-thin partial ceramic veneers. The planning process was thoroughly elaborated by photographs, study models, a virtual smile designed, diagnostic waxing, and reproduction in the patient's mouth through mock-up. Following, dental home bleaching, esthetic gingival contouring, and minimally invasive tooth preparation were performed. Two types of glass ceramics (lithium disilicate and feldspathic) were used in different regions due to the peculiar characteristics of resistance, finishing, and polishing. According to the present case report, preparing a cervical partial ceramic veneer is an innovative, viable, and safe approach to maintaining the incisal portion of the tooth preserved and setting a detailed tooth morphology/color. The application of partial ceramic veneer provides incisal edge preservation and simplifies the reproduction of the adjacent tooth characteristics, avoiding multiple esthetic appointments.

The Effect of In-Office Bleaching with Different Concentrations of Hydrogen Peroxide on Enamel Color, Roughness, and Color Stability

The aim of this study is to evaluate the effectiveness of in-office bleaching in esthetic dentistry on the roughness and color stability of the enamel surface, using different concentrations of hydrogen peroxide (HP). Fifty human incisors were randomly divided into 5 groups (n = 10). No bleaching was performed in the control group. For these groups, concentrations of 40% HP with fluoride (F), 35% HP with calcium (Ca), 25% HP with nano-hydroxyapatite (nHA) and 18% HP with nHA were used for bleaching in the test groups. Surface roughness was assessed at baseline after bleaching occurred. Color measurements were first obtained at baseline, then after the first and second sessions of bleaching, and, finally, after the staining protocol. Scanning electron microscopy and atomic force microscopy were performed. Statistical analysis was conducted with a one-way ANOVA, followed by a post hoc Tukey's test and a paired-samples t-test (p < 0.05). All the bleaching gels used exhibited a similar color change (p > 0.05). Bleaching gels containing 18% HP with nHA and that containing 35% HP with Ca caused less surface roughness of the enamel. Of these concentrations, 25% HP with nHA caused the most surface roughness and no significant difference was observed, compared with 40% HP with F. The highest coloration after bleaching was observed in 40% HP with F and 25% HP with nHA. The lowest coloration was obtained in 35% HP with Ca and 18% HP with nHA but no significant difference was observed between them and the control group. A concentration above 18% HP does not increase the bleaching effectiveness. The results show that 18% HP with nHA and 35% HP with Ca resulted in the least increase in enamel surface roughness when compared to high-concentrate HP; however, it also prevented recoloration after bleaching.

Evidence-based fact checking for selective procedures in restorative dentistry

OBJECTIVES

Similar to other dental specialties, there are many clinical procedures in restorative dentistry that may or may not be supported by good evidence. Thus, the effectiveness of these procedures is uncertain. The aim of this paper is to reduce this knowledge gap by critically inspecting selective procedures in restorative dentistry and exploring if these well-established or widely advocated treatment modalities are necessary for improving treatment outcomes based on the best available evidence.

MATERIALS AND METHODS

A MEDLINE search was conducted to identify research on selective procedures while focusing on clinical trials and systematic reviews. Due to their practical relevance in the decision-making process, cost-effectiveness analyses were also included.

RESULTS

Mixed results were identified regarding the included interventions. Some procedures had adequate evidence supporting them while others were mostly based on beliefs.

CONCLUSIONS

A critical review of the available literature indicates that some common restorative procedures lack adequate support from high-quality research evidence.

CLINICAL RELEVANCE

This paper attempts to highlight the need to critically examine the scientific validity of traditional knowledge and techniques through the context of current research evidence. This will not only help generate consensus between educators, clinicians, and researchers regarding restorative procedures but will also lead to improved patient care and outcomes.

Clinical Evidence of Biomimetic Hydroxyapatite in Oral Care Products for Reducing Dentin Hypersensitivity: An Updated Systematic Review and Meta-Analysis

Dentin hypersensitivity (DH) is a very common dental problem that can have a negative impact on the quality of life and can lead to invasive dental procedures. Prevention of DH and control of symptoms are highly desirable. Hydroxyapatite (HAP) has been shown in vitro to block dentinal tubules and in vivo to be a safe and effective additive in oral care products that reduce DH clinically. This study's aim was to conduct a systematic review and meta-analysis of the current evidence that HAP-containing oral care products reduce DH. Databases were searched, and only clinical trials in humans were included; studies conducted in vitro or on animals were not included. Publications in a foreign language were translated and included. We found 44 published clinical trials appropriate for systematic analysis. More than half of the trials had high-quality GRADE scores. HAP significantly reduced dentin hypersensitivity compared to placebo (39.5%; CI 95% [48.93; 30.06]), compared to fluoride (23%; CI 95% [34.18; 11.82]), and with a non-significant tendency compared to other desensitizing agents (10.2%; CI 95% [21.76; -19.26]). In conclusion, the meta-analysis showed that HAP added to oral care products is a more effective agent than fluoride in controlling dentin hypersensitivity and may be superior to other desensitizers.

Violet LED associated with high concentration hydrogen peroxide: Effects on bleaching efficacy, pH, and temperature

BACKGROUND

This study aimed to evaluate the bleaching efficacy, pH, and temperature of 35% hydrogen peroxide (HP) gel used alone or associated with violet LED.

METHODS

Sixty bovine crowns were sectioned (5 × 5 × 2mm). After staining with black tea, the specimens were randomized into four groups (n = 10) according to the bleaching protocol: HP35R: 3 × 15 min 35% HP; HP35: 1 × 45 min 35% HP; HP35VR: 3 × 8min 35% HP + Violet LED; HP35V: 1 × 24 min + Violet LED. Two bleaching sessions were performed for all the groups. Color change was evaluated before, 24h after each session, 7 days and 15 days after the last session. The variables ∆E₀₀ [CIEDE2000] and W_ID were used for color analysis. The pH variation (initial and final) and the temperature of the gel were recorded (n = 5). ANOVA two-way for repeated measures and Bonferroni post-test was used at a significance level of 5%.

RESULTS

HP35VR and HP35V the most noticeable color change(p < 0.05). The final values of pH were lower than the initial ones, but with no difference between the groups (p > 0.05). Groups HP35VR and HP35V showed an increase in temperature in relation to HP35R (p < 0.05).

CONCLUSIONS

Violet LED improved the bleaching efficacy of 35% HP in a time-saving manner without negatively affecting the pH and temperature of 35% HP. The renewal of HP did not influence the outcomes.

Bleaching efficacy and quality of life of different bleaching techniques - randomized controlled trial

OBJECTIVES

To evaluate bleaching efficacy and oral health-related quality of life (ORHQoL) of three bleaching systems with similar hydrogen peroxide (HP) concentration for up to 6 months post-treatment.

MATERIALS AND METHODS

A randomized controlled trial was designed with three parallel groups: group A - in-office 6% HP paint-on varnish; group B - at-home 6% HP with adaptable tray; group C - at-home 16% carbamide peroxide with custom tray. At three different stages (baseline, after bleaching, and 6-month follow-up), ORHQoL was evaluated by the OHIP-14 questionnaire and tooth color of the upper canines and central incisors were measured by two shade guides and a spectrophotometer (measuring CIE L*a*b* with respective color/whiteness differences - ΔE00/ΔWID). Results were presented as mean and 95% confidence intervals and statistical tests were performed appropriately, considering a significance level of α = 0.05.

RESULTS

All groups presented significant color differences (P < 0.05) between all stages, with ΔE00/ΔWID surpassing the perceptibility threshold in 98% cases, with group C's results being significantly (P < 0.05) higher when compared to other groups, although with significantly (P < 0.05) higher values of color relapse. Significative ORHQoL improvements (P < 0.05) were detected after bleaching in a global analysis with no differences between techniques.

CONCLUSIONS

All techniques presented bleaching efficacy, color stability, and improvements in ORHQoL up to 6 months post-treatment.

CLINICAL SIGNIFICANCE

Clinicians may consider both at-home and in-office bleaching techniques with 6% HP to attain long-lasting satisfactory clinical results while producing positive changes in ORHQoL.

The influence of hydrogen peroxide concentration on the chemical kinetics of photo-accelerated tooth whitening

BACKGROUND

The bleaching procedure consists of chemical principles of free radical release that react with chromophores, which results in an amount of energy released in this process. However, the evaluation of the electrical potential generated in these protocols has not yet been thoroughly investigated in the literature. Thus, this study aimed to examine variations in pH, mV, and temperature of different concentrations of hydrogen peroxide in the presence or absence of an intermittent LED/LASER photo acceleration system.

METHODS

The study was divided into six groups (n = 9) according to the concentration of hydrogen peroxide (6%, 15%, and 35%), associated or not with the photo acceleration system LED/LASER. We followed the variation of pH, mV, and temperature at 1, 5, 10, 15, and 30 min after gel manipulation. Data were evaluated by two-way ANOVA of repeated measures (α =0.05).

RESULTS

pH, mV, and temperature of the groups showed statistical differences both in the light and bleach and in the interaction between the two factors (p < 0.0001), where pH and mV were more influenced by the bleach and light factor, while the temperature was influenced by the bleach factor associated with light. HP15 presented the most significant change in pH, mV, and temperature.

CONCLUSION

The use of LED/laser increased the temperature of the gels and altered the pH and mV kinetics of HP6 and HP15, which did not occur in HP35, possibly due to the high ionic potential linked to the concentration.

The influence of violet LED application time on the esthetic efficacy and cytotoxicity of a 35% H2O2 bleaching gel

OBJECTIVE

To assess the potential influence of violet LED (V-LED) application time on the esthetic efficacy and cytotoxicity of a 35% H₂O₂ bleaching gel.

METHODOLOGY

Stained and standardized enamel/dentin discs were subjected to one in-office tooth bleaching session (45 min), and the gel was either irradiated or not with V-LED. Thus, the following groups were established (n = 8): G1: No treatment (negative control, NC); G2: 35% H₂O₂ (positive control, PC); G3: 35%H₂O₂ + V-LED/15 min; G4: 35%H₂O₂ + V-LED/30 min; G5: 35%H₂O₂ + V-LED/45 min. First, esthetic efficacy was assessed (ΔE₀₀ and ΔWI). Discs assembled in artificial pulp chambers were subjected to the same bleaching treatments. Then, the extracts (culture medium + diffused bleaching gel components) were collected and applied to MDPC-23 pulp cells, which were analyzed for viability (Live/Dead, MTT) and oxidative stress (OxS). The amount of H₂O₂ in the extracts was also determined (leuco crystal-violet/peroxidase). The data were subjected to ANOVA/Tukey at a 5% significance level.

RESULTS

Although esthetic efficacy did not differ among the irradiated groups (G3, G4, and G5) (p > 0.05), their results were higher than in G2 (PC; p < 0.05). In the irradiated groups, the cell viability and OxS as well as the amount of H₂O₂ in the extracts were statistically similar to G2 (PC), regardless of irradiation time (p > 0.05).

CONCLUSION

Although V-LED improves the esthetic outcome of in-office tooth bleaching, increasing irradiation time does not effect the color changes and cytotoxicity of this professional therapy.

Modern concepts of teeth whitening – a narrative review

Whitening has been known since Biblical times. Nowadays, in the developed world, patients are placing a stronger interest in the aesthetic appearance of their teeth. As a result, public demand for aesthetic dentistry, including tooth whitening, has recently increased. Aesthetics of the teeth is of great importance to many patients. The aim is to summarise and discuss the teeth whitening procedure, tools, materials, and methods, as well as its efficacy and safety. In addition, the paper aims to provide full and comprehensive information for dentists and their patients about the merits and perils of whitening. Methods. Relevant literature from Scopus published in English was selected using the following search criteria "tooth OR teeth AND whitening OR bleaching" by 2022. In total, there were found 3840 papers. Then, we applied the inclusion and exclusion criteria to the selected scientific papers to choose the relevant ones. Results. A comprehensive study of the available information related to means and products for teeth whitening was carried out. Whitening may be accomplished by the physical removal of the stain or a chemical reaction to lighten the tooth colour. The indications for appropriate use of tooth-whitening methods and products depend on the correct diagnosis of the discolouration. When used appropriately, tooth-whitening methods are safe and effective. Conclusions. Tooth whitening is a form of dental treatment and should be completed as part of a comprehensive treatment plan developed by a dentist after an oral examination.

Effect of an experimental desensitizing gel on bleaching-induced tooth sensitivity after in-office bleaching—a double-blind, randomized controlled trial

OBJECTIVES

To evaluate the risk and intensity of tooth sensitivity (TS), and the efficacy of in-office bleaching after applying an experimental desensitizing gel composed of 10% calcium gluconate, 0.1% dexamethasone acetate, 10% potassium nitrate, and 5% glutaraldehyde.

MATERIAL AND METHODS

In a split-mouth, double-blind, placebo-controlled study, 50 participants had their upper hemiarches randomized into experimental and placebo groups. Desensitizing and placebo gels were applied for 10 min before in-office bleaching (35% hydrogen peroxide, 1 × 50 min; two bleaching sessions; 1-week interval). TS was recorded immediately after bleaching, 1, 24, and 48 h after each session, with a 0-10 visual analogue scale (VAS) and a five-point numerical rating scale (NRS). The color was recorded in all groups at baseline, 1 week after each session, and 1 month after the end of bleaching using shade guide units (ΔSGUs) and a spectrophotometer (ΔE_ab, ΔE₀₀, and ΔWI_D).

RESULTS

Most participants (96%) felt some discomfort during treatment regardless of the study group. The odds ratio for pain was 0.65 (95% CI 0.1 to 4.1; p = 1.0). The intensity of TS did not differ between groups (p > 0.31), and it was only 0.34 VAS units lower in the experimental group. A significant color change occurred in both groups regardless of the group.

CONCLUSIONS

The desensitizing experimental gel applied before in-office bleaching did not reduce the risk and the intensity of TS and did not affect color change.

CLINICAL RELEVANCE

Although the experimental desensitizing agent with varying mechanisms of action did not jeopardize the color change, it did not reduce the risk or intensity of in-office bleaching.

CLINICAL TRIAL REGISTRATION NUMBER

RBR-7T7D4D.

Present status and future directions - Managing discoloured teeth

Managing tooth discolouration involves a range of different protocols for clinicians and patients in order to achieve an aesthetic result. There is an increasing public awareness in the appearance of their teeth and management of tooth discolouration may be inter-disciplinary and involve both vital and nonvital teeth. Vital teeth can be easily treated with low concentration hydrogen peroxide products safely and effectively using an external approach and trays. For endodontically treated teeth, the walking bleach technique with hydrogen releasing peroxide products is popular. However, there is an association with external cervical root resorption with higher concentrations of hydrogen peroxide of 30%-35%. There are also regulatory considerations for the use of hydrogen peroxide in certain jurisdictions internationally. Prosthodontic treatments are more invasive and involve loss of tooth structure as well as a life cycle of further treatment in the future. This narrative review is based on searches on PubMed and the Cochrane library. Bleaching endodontically treated teeth can be considered a safe and effective protocol in the management of discoloured teeth. However, the association between bleaching and resorption remains unclear although there is likely to be a relation to prior trauma. It is prudent to avoid thermocatalytic approaches and to use a base/sealer to cover the root filling. An awareness expectations of patients and multidisciplinary treatment considerations is important in achieving the aesthetic result for the patient. It is likely that there will be an increasing demand for aesthetic whitening treatments. Bleaching of teeth has also become increasingly regulated although there are international differences in the use and concentration of bleaching agents.

Use of an applicator brush with high concentration bleaching gels

OBJECTIVES

To evaluate in vitro two high concentration self-mix bleaching gels (35% or 37.5%) with different application tips (with or without an applicator brush) during in-office bleaching.

MATERIALS AND METHODS

Healthy premolars were randomly assigned to five groups (n = 8): no treatment; 35% HP without applicator brush, 35% HP with applicator brush, 37.5% HP without applicator brush, and 37.5% HP with applicator brush. After the procedures, the concentration of HP transferred into the pulp chamber was evaluated using UV-Vis. The amount of gel used in each group was measured on a precision analytical balance. Color change (ΔEab, ΔE00, and ΔWID) was evaluated with a digital spectrophotometer. Initial concentration was measured by titration with potassium permanganate. The pH was evaluated using a digital pH meter. The data from each test were submitted to nonparametric tests (α = 0.05).

RESULTS

Using a tip with an applicator brush expended less gel and left a lower amount of HP inside the pulp chamber compared to the tip without a brush for both bleaching gels (p < 0.0003), although no significant difference in color change was observed (p < 0.05). The 37.5% HP showed a more stable and less acidic pH and a lower amount of HP in the pulp chamber than the 35% HP (p < 0.00001).

CONCLUSION

The HP penetration into the pulp chamber was lower when using an applicator with a brush tip than when using one with a conventional tip. As for the color, both tips were considered to lighten teeth.

CLINICAL SIGNIFICANCE

For the application of a self-mixing high concentration in-office bleaching gel, a brush tip should be recommended because its use diminishes the penetration of HP into the pulp chamber and wastes less bleaching gel.

Effects of At-Home and In-Office Bleaching Agents on the Color Recovery of Esthetic CAD-CAM Restorations after Red Wine Immersion

The aim of this study was to evaluate the effects of at-home and in-office bleaching agents on esthetic CAD-CAM materials after red wine immersion by measuring their optical properties. Sixty specimens were prepared out of three esthetic CAD-CAM materials: Vita Enamic, Celtra Duo, and Ceresmart (n = 20). All specimens were immersed in a red wine solution, and color measurements were performed. Specimens were randomly divided (n = 10) according to the bleaching procedure (in office, at home), bleaching durations were set to 3 time points, and color measurements were performed. According to the Commission Internationale de l’Eclairage (CIE) L* a* b* parameters, CIEDE2000 color differences (ΔE00), translucency parameters (TP00), and whiteness index values (ΔWID) after wine staining and after bleaching were calculated. Data were analyzed using the Mann−Whitney U-test, the Kruskal−Wallis test, and a two-way analysis of variance (ANOVA) (α = 0.05). ΔE00, ΔTP00, and ΔWID decreased with an increase in bleaching treatment. ΔE00 after the final bleaching treatment of in-office bleaching ranged from 1.7 to 2.0, whereas those of in-office treatment ranged from 0.4 to 1.1. All ΔTP00 and ΔWID after the final treatment were below the 50:50% perceptibility thresholds (ΔTP00 < 0.6, and ΔWID < 0.7). Significant differences in ΔE00, ΔTP00, and ΔWID among esthetic CAD-CAM materials were found between CD and CE. In the present study, color recovery after at-home and in-office bleaching appeared to be material-dependent. In-office bleaching showed more effective recovery comparing to at-home bleaching.

Manganese oxide increases bleaching efficacy and reduces the cytotoxicity of a 10% hydrogen peroxide bleaching gel

OBJECTIVE

The study aims to assess the effects of a 10% H₂O₂ bleaching gel with different MnO₂ concentrations on the bleaching efficacy (BE), degradation kinetics (DK) of H₂O₂, and trans-amelodentinal cytotoxicity (TC).

MATERIALS AND METHODS

Standardized bovine enamel/dentin disks (n = 96) were placed in artificial pulp chambers, and the bleaching gels were applied for 45 min. Thus, the following groups were established: (G1) no treatment (negative control/NC); (G2) 35% H₂O₂ (positive control/PC); (G3) 10% H₂O₂; (G4) 10% H₂O₂ + 2 mg/mL MnO₂; (G5) 10% H₂O₂ + 6 mg/mL MnO₂; and (G6) 10% H₂O₂ + 10 mg/mL MnO₂. After analyzing bleaching efficacy (ΔE₀₀ and ΔWI), the degradation kinetics of H₂O₂ and trans-amelodentinal cytotoxicity were determined (n = 8, ANOVA/Tukey; p < 0.05).

RESULTS

G6 presented BE (ΔE₀₀ and ΔWI) statistically similar to G2, which represented conventional in-office bleaching (p = 0.6795; p > 0.9999). A significant reduction in the diffusion of H₂O₂ occurred in G3, G4, G5, and G6 compared to G2 (p < 0.0001). The highest DK of H₂O₂ occurred in G6 (p < 0.0001), which had the lowest TC in comparison with all other bleached groups (p ≤ 0.0186).

CONCLUSION

The addition of 10 mg/mL of MnO₂ in a 10% H₂O₂ bleaching gel potentiates the degradation of this reactive molecule, which increases the BE of the product and decreases TC.

CLINICAL SIGNIFICANCE

Replacing a 35% H₂O₂ gel commonly used for conventional in-office dental bleaching by a 10% H₂O₂ gel containing 10 mg/mL of MnO₂ reduces the cytotoxicity of this professional therapy, maintaining its excellent esthetic efficacy.

Pyro-catalysis for tooth whitening via oral temperature fluctuation

Tooth whitening has recently become one of the most popular aesthetic dentistry procedures. Beyond classic hydrogen peroxide-based whitening agents, photo-catalysts and piezo-catalysts have been demonstrated for non-destructive on-demand tooth whitening. However, their usage has been challenged due to the relatively limited physical stimuli of light irradiation and ultrasonic mechanical vibration. To address this challenge, we report here a non-destructive and convenient tooth whitening strategy based on the pyro-catalysis effect, realized via ubiquitous oral motion-induced temperature fluctuations. Degradation of organic dyes via pyro-catalysis is performed under cooling/heating cycling to simulate natural temperature fluctuations associated with intake and speech. Teeth stained by habitual beverages and flavorings can be whitened by the pyroelectric particles-embedded hydrogel under a small surrounding temperature fluctuation. Furthermore, the pyro-catalysis-based tooth whitening procedure exhibits a therapeutic biosafety and sustainability. In view of the exemplary demonstration, the most prevalent oral temperature fluctuation will enable the pyro-catalysis-based tooth whitening strategy to have tremendous potential for practical applications.

Whitening efficacy of low concentration hydrogen peroxide photoactivated with blue or violet LED

BACKGROUND

Bleaching protocols using low concentration hydrogen peroxide (HP) photoactivated with LED sources have been widely discussed. We evaluated the whitening efficacy of 15% HP photoactivated with blue or violet LED compared to 35% HP.

METHODS

Thirty bovine crowns were sectioned into 5 × 5 × 2mm specimens. After staining in black tea, the specimens were randomized into three groups (n=10): 35% HP, 15% HP + blue LED and 15% HP + violet LED. Two bleaching sessions were performed and the color assessment (∆L*, ∆a*, ∆b*, ∆E_ab [CIELab], ∆E₀₀ [CIEDE2000] and WI_D) was performed before, 24h after each session, 7 days and 1 month after the last session. Data were evaluated by two-way repeated measures ANOVA and Bonferroni post-test at a significance level of 5%.

RESULTS

All groups showed effective and similar results over 1 month of follow-up (p > 0.05), with only intragroup differences among the time intervals (p < 0.05).

CONCLUSIONS

The use of 15% HP photoactivated with blue or violet LED showed similar whitening efficacy compared to 35% HP. Thus, the association of low concentration bleaching gels with LED sources can provide a successful and less aggressive treatment in terms of color change.

Copper Doped Carbon Dots for Addressing Bacterial Biofilm Formation, Wound Infection, and Tooth Staining

Oral infectious diseases and tooth staining, the main challenges of dental healthcare, are inextricably linked to microbial colonization and the formation of pathogenic biofilms. However, dentistry has so far still lacked simple, safe, and universal prophylactic options and therapy. Here, we report copper-doped carbon dots (Cu-CDs) that display enhanced catalytic (catalase-like, peroxidase-like) activity in the oral environment for inhibiting initial bacteria (Streptococcus mutans) adhesion and for subsequent biofilm eradication without impacting the surrounding oral tissues via oxygen (O₂) and reactive oxygen species (ROS) generation. Especially, Cu-CDs exhibit strong affinity for lipopolysaccharides (LPS) and peptidoglycans (PGN), thus conferring them with excellent antibacterial ability against Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli), such that they can prevent wound purulent infection and promoting rapid wound healing. Additionally, the Cu-CDs/H₂O₂ system shows a better performance in tooth whitening, compared with results obtained with other alternatives, e.g., CDs and clinically used H₂O₂, particularly its negligible enamel and dentin destruction. It is anticipated that the biocompatible Cu-CDs presented in this work are a promising nano-mouthwash for eliminating oral pathogenic biofilms, prompting wound healing as well as tooth whitening, highlighting their significance in oral health management.

Effects of tooth bleaching protocols with violet LED and hydrogen peroxide on enamel properties

BACKGROUND

This study evaluated the color change, enamel surface roughness and microhardness after different tooth bleaching protocols, using hydrogen peroxide (HP) and/or violet LED.

METHODS

Forty bovine specimens (7 × 7 × 2 mm) were randomly distributed into 4 groups: 35% HP, 6% HP, 6% HP + violet LED and violet LED alone. First, the specimens were stained with black tea and then submitted to two bleaching sessions of 30 min with an interval of 7 days. Color change (∆L*, ∆a*, ∆b* and ∆E00) after 24 h of each session and 1 week after the last session was evaluated. Enamel roughness and microhardness were evaluated immediately before the sessions, 24 h and 1 week after the last session. Data were evaluated by ANOVA for repeated measures and Bonferroni post-test or Kruskall-Wallis and Dunn tests (α = 0.05). Representative specimens from each group were analyzed by scanning electron microscopy.

RESULTS

6% HP + violet LED and 35% HP showed the highest color change, while violet LED alone had the lowest results. Enamel roughness analyses showed that 6% HP + violet LED and 35% HP showed changes after two bleaching sessions. No differences were observed regarding enamel microhardness.

CONCLUSIONS

The use of 6% HP + violet LED showed enhanced bleaching efficacy compared to 35% HP. However, violet LED used alone exhibited the lowest color change. 6% HP + violet LED and 35% HP promoted changes on enamel roughness, while no microhardness changes was observed for any group.

Pilot study on the applicability of boron-doped diamond electrodes for tooth whitening

Objectives

While various approaches are available for tooth whitening, the basic concept employs the use of peroxides in the form of gels, which are applied to tooth surfaces. Previous studies have shown that reactive oxygen species acting as potent disinfectants can be produced using boron‐doped diamond (BDD) electrodes for the electrolysis of water. With these electrodes being applicable, for example, for endodontic treatment, it was the goal of this pilot study to use such electrodes for tooth whitening.

Material and Methods

Two groups (n = 10) of intact clinical crowns were obtained by horizontally cutting off roots of extracted human teeth. The crowns were either bleached by applying a commercially available agent based on 40% hydrogen peroxide or were immersed in saline undergoing electrolysis with BDD electrodes. Whitening of specimens was judged on standardized photographs by examiners with three different levels of experience. Statistical analysis was based on Gwet's AC2 coefficient with quadratic weights, Shapiro–Wilk tests, and two‐way analysis of variance of aligned rank transformed data (level of significance set at α = .05).

Results

Levels of reliability ranging from fair to substantial were recorded for single persons while the level of reliability ranged between fair and moderate for groups of raters. The level of experience had no significant effect on the ratings (p = .2500). The bleaching method had a significant effect on ratings (p = .0005) with BDD electrodes showing less effect.

Conclusions

Bleaching by applying BDD electrodes was possible, but was not as effective as the use of commercially available in‐office whitening gel. A potential explanation may be seen in different concentrations of reactive oxygen species.

Whitening efficacy of popular natural products on dental enamel

The objective of this study was to evaluate the effect of natural bleaching products on the color, whiteness, and superficial properties of dental enamel. Seventy fragments of bovine teeth were obtained (6mm x 6mm x 2mm). Initial surface roughness (Surfcorder SE1700, Kosakalab), microhardness (HMV-2, Shimadzu), color (EasyShade, VITA), and surface gloss (Micro-Gloss 45º BYK, Gardner) readings were done. Samples were separated into five groups (n=14) according to the treatments used: CT-conventional toothpaste (negative control); CH-charcoal; TU-turmeric; BP-banana peel, and CP16%-16% carbamide peroxide gel (positive control, 4 h/day for 14 days), and then brushed for 560 cycles (T1) and 1200 cycles (T2), equivalent to 14 and 30 days of brushing. New measurements were performed after T1 and T2. The whiteness index for dentistry change (∆WID) and Weight loss (Wl) were calculated. CP16% demonstrated the highest (p<.05) color change (ΔE00) and ∆WID (2-way ANOVA, Bonferroni, p<.05). Surface gloss alterations were lower for TU, CP16%, and BP. CT and CH increased surface roughness (p<.05). CP16% decreased enamel microhardness. CH presented medium abrasiveness, and CT and TU, low abrasiveness. The popular bleaching products were not efficient for tooth whitening. Furthermore, brushing with charcoal increased the enamel surface roughness, and CP16% decreased enamel microhardness over time.