Clinical Applications of Polymeric Micelle Carrier Systems in Chemotherapy and Image Diagnosis of Solid Tumors

Encapsulation of Ru(II) Polypyridine Complexes for Tumor-Targeted Anticancer Therapy

Ru(II) polypyridine complexes have attracted much attention as anticancer agents because of their unique photophysical, photochemical, and biological properties. Despite their promising therapeutic profile, the vast majority of compounds are associated with poor water solubility and poor cancer selectivity. Among the different strategies employed to overcome these pharmacological limitations, many research efforts have been devoted to the physical or covalent encapsulation of the Ru(II) polypyridine complexes into nanoparticles. This article highlights recent developments in the design, preparation, and physicochemical properties of Ru(II) polypyridine complex-loaded nanoparticles for their potential application in anticancer therapy.

Block Copolymer Micelles Encapsulating Au(III) Bis(Dithiolene) Complexes as Promising Nanostructures with Antiplasmodial Activity

Block copolymer micelles (BCMs) can be used to improve the solubility of lipophilic drugs and increase their circulation half-life. Hence, BCMs assembled from MePEG-b-PCL were evaluated as drug delivery systems of gold(III) bis(dithiolene) complexes (herein AuS and AuSe) to be employed as antiplasmodial drugs. These complexes exhibited remarkable antiplasmodial activity against liver stages of the Plasmodiumberghei parasite, and low toxicity in a model of zebrafish embryos. To improve the complexes' solubility, BCMs were loaded with AuS, AuSe, and the reference drug primaquine (PQ). PQ-BCMs (D_h = 50.9 ± 2.8 nm), AuSe-BCMs (D_h = 87.1 ± 9.7 nm), and AuS-BCMs (D_h = 72.8 ± 3.1 nm) were obtained with a loading efficiency of 82.5%, 55.5%, and 77.4%, respectively. HPLC analysis and UV-Vis spectrophotometry showed that the compounds did not suffer degradation after encapsulation in BCMs. In vitro release studies suggest that AuS/AuSe-BCMs present a more controlled release compared with PQ-loaded BCMs. The antiplasmodial hepatic activity of the drugs was assessed in vitro and results indicate that both complexes present higher inhibitory activity than PQ, although encapsulated AuS and AuSe presented lower activity than their non-encapsulated counterparts. Nevertheless, these results suggest that the use of BCMs as delivery vehicles for lipophilic metallodrugs, particularly AuS and AuSe, could enable the controlled release of complexes and improve their biocompatibility, constituting a promising alternative to conventional antimalarial treatments.

Inhaled siRNA Formulations for Respiratory Diseases: From Basic Research to Clinical Application

The development of siRNA technology has provided new opportunities for gene-specific inhibition and knockdown, as well as new ideas for the treatment of disease. Four siRNA drugs have already been approved for marketing. However, the instability of siRNA in vivo makes systemic delivery ineffective. Inhaled siRNA formulations can deliver drugs directly to the lung, showing great potential for treating respiratory diseases. The clinical applications of inhaled siRNA formulations still face challenges because effective delivery of siRNA to the lung requires overcoming the pulmonary and cellular barriers. This paper reviews the research progress for siRNA inhalation formulations for the treatment of various respiratory diseases and summarizes the chemical structural modifications and the various delivery systems for siRNA. Finally, we conclude the latest clinical application research for inhaled siRNA formulations and discuss the potential difficulty in efficient clinical application.

Dual Responsive poly(vinyl caprolactam)-Based Nanogels for Tunable Intracellular Doxorubicin Delivery in Cancer Cells

In this work, doxorubicin (Dox)-encapsulated poly(vinyl caprolactam) (PVCL)-based three-dimensional nanogel networks were developed and were crosslinked with disulfide linkages. The nanogels degrade rapidly to low molecular weight chains in the presence of the typical intracellular concentration of glutathione. Doxorubicin (Dox) was successfully encapsulated into these nanogels. The nanogels have a high drug loading of 49% and can be tailored to 182 nm to deliver themselves to the targeted cells and release Dox under dual stimuli conditions, such as redox and temperature. By evaluating cell viability in the HepG2 cell line, we observed that Dox-loaded nanogels effectively killed the cancer cell. Fluorescence microscopy results show that the nanogels could easily be internalized with HepG2 cells. The results confirm that the nanogels destabilized in intracellular cytosol via degradation of disulfide bonds in nanogels networks and release of the Dox nearby the nucleus. These carriers could be promising for cancer drug delivery.

Characterizing block-copolymer micelles used in nanomedicines via solution static scattering techniques

Block copolymers are well recognized as excellent nanotools for delivering hydrophobic drugs. The formulation of such delivery nanoparticles requires robust characterization and clarification of the critical quality attributes correlating with the safety and efficacy of the drug before applying to regulatory authorities for approval. Static solution scattering from block copolymers is one such technique. This paper first outlines the theoretical background and current models for analyzing this scattering and then presents an overview of our recent studies on block copolymers.

Current Status of Brain Tumor in the Kingdom of Saudi Arabia and Application of Nanobiotechnology for Its Treatment: A Comprehensive Review

OBJECTIVE

Brain tumors are the most challenging of all tumors and accounts for about 3% of all cancer allied deaths. The aim of the present review is to examine the brain tumor prevalence and treatment modalities available in the Kingdom of Saudi Arabia. It also provides a comprehensive analysis of the application of various nanotechnology-based products for brain cancer treatments along with their prospective future advancements.

METHODS

A literature review was performed to identify and summarize the current status of brain cancer in Saudi Arabia and the scope of nanobiotechnology in its treatment.

RESULTS

Depending upon the study population data analysis, gliomas, astrocytoma, meningioma, and metastatic cancer have a higher incidence rate in Saudi Arabia than in other countries, and are mostly treated in accordance with conventional treatment modalities for brain cancer. Due to the poor prognosis of cancer, it has an average survival rate of 2 years. Conventional therapy includes surgery, radiotherapy, chemotherapy, and a combination thereof, but these do not control the disease's recurrence. Among the various nanomaterials discussed, liposomes and polymeric nanoformulations have demonstrated encouraging outcomes for facilitated brain cancer treatment.

CONCLUSIONS

Nanomaterials possess the capacity to overcome the shortcomings of conventional therapies. Polymer-based nanomaterials have shown encouraging outcomes against brain cancer when amalgamated with other nano-based therapies. Nonetheless, nanomaterials could be devised that possess minimal toxicity towards normal cells or that specifically target tumor cells. In addition, rigorous clinical investigations are warranted to prepare them as an efficient and safe modality for brain cancer therapy.

Nanotechnology Based Approach for Hepatocellular Carcinoma Targeting

Hepatocellular carcinoma (HCC) is the primary liver cancer that has shown a high incidence and mortality rate worldwide among several types of cancers. A large variety of chemotherapeutic agents employed for the treatment have a limited success rate owing to their limited site-specific drug targeting ability. Thus, there is a demand to develop novel approaches for the treatment of HCC. With advancements in nanotechnology-based drug delivery approaches, the challenges of conventional chemotherapy have been continuously decreasing. Nanomedicines constituted of lipidic and polymeric composites provide a better platform for delivering and opening new pathways for HCC treatment. A score of nanocarriers such as surface-engineered liposomes, nanoparticles, nanotubes, micelles, quantum dots, etc., has been investigated in the treatment of HCC. These nanocarriers are considered to be highly effective clinically for delivering chemotherapeutic drugs with high site-specificity ability and therapeutic efficiency. The present review highlights the current focus on the application of nanocarrier systems using various ligand-based receptor-specific targeting strategies for the treatment and management of HCC. Moreover, the article has also included information on the current clinically approved drug therapy for hepatocellular carcinoma treatment and updates of regulatory requirements for approval of such nanomedicines.

Harnessing amphiphilic polymeric micelles for diagnostic and therapeutic applications: Breakthroughs and bottlenecks

Amphiphilic block copolymers are widely utilized in the design of formulations owing to their unique physicochemical properties, flexible structures and functional chemistry. Amphiphilic polymeric micelles (APMs) formed from such copolymers have gained attention of the drug delivery scientists in past few decades for enhancing the bioavailability of lipophilic drugs, molecular targeting, sustained release, stimuli-responsive properties, enhanced therapeutic efficacy and reducing drug associated toxicity. Their properties including ease of surface modification, high surface area, small size, and enhanced permeation as well as retention (EPR) effect are mainly responsible for their utilization in the diagnosis and therapy of various diseases. However, some of the challenges associated with their use are premature drug release, low drug loading capacity, scale-up issues and their poor stability that need to be addressed for their wider clinical utility and commercialization. This review describes comprehensively their physicochemical properties, various methods of preparation, limitations followed by approaches employed for the development of optimized APMs, the impact of each preparation technique on the physicochemical properties of the resulting APMs as well as various biomedical applications of APMs. Based on the current scenario of their use in treatment and diagnosis of diseases, the directions in which future studies need to be carried out to explore their full potential are also discussed.

Sequence of Polyurethane Ionomers Determinative for Core Structure of Surfactant-Copolymer Complexes

The core of micelles self-assembled from amphiphiles is hydrophobic and contains little water, whereas complex coacervate core micelles co-assembled from oppositely charged hydrophilic polymers have a hydrophilic core with a high water content. Co-assembly of ionic surfactants with ionic-neutral copolymers yields surfactant-copolymer complexes known to be capable of solubilizing both hydrophilic and hydrophobic cargo within the mixed core composed of a coacervate phase with polyelectrolyte-decorated surfactant micelles. Here we formed such complexes from asymmetric (PUI-A2) and symmetric (PUI-S2), sequence-controlled polyurethane ionomers and poly(N-methyl-2-vinylpyridinium iodide)29-b-poly(ethylene oxide)204 copolymers. The complexes with PUI-S2 were 1.3-fold larger in mass and 1.8-fold larger in radius of gyration than the PUI-A2 complexes. Small-angle X-ray scattering revealed differences in the packing of the similarly sized PUI micelles within the core of the complexes. The PUI-A2 micelles were arranged in a more ordered fashion and were spaced further apart from each other (10 nm vs. 6 nm) than the PUI-S2 micelles. Hence, this work shows that the monomer sequence of amphiphiles can be varied to alter the internal structure of surfactant-copolymer complexes. Since the structure of the micellar core may affect both the cargo loading and release, our findings suggest that these properties may be tuned through control of the monomer sequence of the micellar constituents.

Assessing the pharmacokinetics and toxicology of polymeric micelle conjugated therapeutics

Introduction: Analogous to nanocarriers such as nanoparticles, liposomes, nano lipoidal carriers, niosomes, and ethosomes, polymeric micelles have gained significance in the field of drug delivery. They have attracted scientists worldwide by their nanometric size, wide range of polymers available for building block synthesis, stability and potential to enhance the targeting and safety of drugs. Incorporation of drugs within the interior of polymeric micelles alters the drug pharmacokinetics, which generally results in increased efficiency.Areas covered: This review deals with the pharmacokinetics of various anti-neoplastic drugs loaded into micelles. The structure of polymeric micelles, polymers employed in their development and techniques involved will be discussed. This is followed by discussion on the pharmacokinetics of anti-cancer drugs loaded into polymeric micelles and the toxicity concerns associated.Expert opinion: Polymeric micelles are nanometeric carriers, with higher stability, polymeric flexibility and higher drug loading of poorly water-soluble drugs. These nanosystems help in increasing the bioavailability of drugs by encapsulating them within the hydrophobic core. The proper selection and design of the amphiphilic polymer for micelles is a crucial step as it decides the toxicity and the biocompatibility.

The Therapeutic Efficacy of Dendrimer and Micelle Formulations for Breast Cancer Treatment

Breast cancer is among the most common types of cancer in women and it is the cause of a high rate of mortality globally. The use of anticancer drugs is the standard treatment approach used for this type of cancer. However, most of these drugs are limited by multi-drug resistance, drug toxicity, poor drug bioavailability, low water solubility, poor pharmacokinetics, etc. To overcome multi-drug resistance, combinations of two or more anticancer drugs are used. However, the combination of two or more anticancer drugs produce toxic side effects. Micelles and dendrimers are promising drug delivery systems that can overcome the limitations associated with the currently used anticancer drugs. They have the capability to overcome drug resistance, reduce drug toxicity, improve the drug solubility and bioavailability. Different classes of anticancer drugs have been loaded into micelles and dendrimers, resulting in targeted drug delivery, sustained drug release mechanism, increased cellular uptake, reduced toxic side effects of the loaded drugs with enhanced anticancer activity in vitro and in vivo. This review article reports the biological outcomes of dendrimers and micelles loaded with different known anticancer agents on breast cancer in vitro and in vivo.

Novel Polymeric Micelles-Coated Magnetic Nanoparticles for In Vivo Bioimaging of Liver: Toxicological Profile and Contrast Enhancement

Magnetic nanoparticles are intensively studied for magnetic resonance imaging (MRI) as contrast agents but yet there remained some gaps regarding their toxicity potential and clinical implications of their biodistribution in organs. This study presents the effects induced by magnetite nanoparticles encapsulated in polymeric micelles (MNP-DSPE-PEG) on biochemical markers, metabolic functions, and MRI signal in CD1 mice liver. Three groups of animals, one control and the other ones injected with a suspension of five, respectively, 15 mg Fe/kg bw nanoparticles, were monitored up to 14 days. The results indicated the presence of MNP-DSPE-PEG in the liver in the first two days of the experiment. The most significant biochemical changes also occurred in the first 3 days after exposure when the most severe histological changes were observed. The change of the MRI signal intensity on the T2-weighted images and increased transverse relaxation rates R2 in the liver were observed after the first minutes from the nanoparticle administration. The study shows that the alterations of biomarkers level resulting from exposure to MNP-DSPE-PEG are restored in time in mice liver. This was associated with a significant contrast on T2-weighted images and made us conclude that these nanoparticles might be potential candidates for use as a contrast agent in liver medical imaging.

Pulsatile Drug Delivery System Triggered by Acoustic Radiation Force

Since biological systems exhibit a circadian rhythm (24-hour cycle), they are susceptible to the timing of drug administration. Indeed, several disorders require a therapy that synchronizes with the onset of symptoms. A targeted therapy with spatially and temporally precise controlled drug release can guarantee a considerable gain in terms of efficacy and safety of the treatment compared to traditional pharmacological methods, especially for chronotherapeutic disorders. This paper presents a proof of concept of an innovative pulsatile drug delivery system remotely triggered by the acoustic radiation force of ultrasound. The device consists of a case, in which a drug-loaded gel can be embedded, and a sliding top that can be moved on demand by the application of an acoustic stimulus, thus enabling drug release. Results demonstrate for the first time that ultrasound acoustic radiation force (up to 0.1 N) can be used for an efficient pulsatile drug delivery (up to 20 μg of drug released for each shot).

Systematic evaluation of design features enables efficient selection of Π electron-stabilized polymeric micelles

Polymeric micelles (PM) based on poly(ethylene glycol)-b-poly(N-2-benzoyloxypropyl methacrylamide) (mPEG-b-p(HPMA-Bz)) loaded with paclitaxel (PTX-PM) have shown promising results in overcoming the suboptimal efficacy/toxicity profile of paclitaxel. To get insight into the stability of PTX-PM formulations upon storage and to optimize their in vivo tumor-targeted drug delivery properties, we set out to identify a lead PTX-PM formulation with the optimal polymer composition. To this end, PM based on four different mPEG_5k-b-p(HPMA-Bz) block copolymers with varying molecular weight of the hydrophobic block (17-3 kDa) were loaded with different amounts of PTX. The hydrodynamic diameter was 52 ± 1 nm for PM prepared using polymers with longer hydrophobic blocks (mPEG_5k-b-p(HPMA-Bz)_17k and mPEG_5k-b-p(HPMA-Bz)_10k) and 39 ± 1 nm for PM composed of polymers with shorter hydrophobic blocks (mPEG_5k-b-p(HPMA-Bz)_5k and mPEG_5k-b-p(HPMA-Bz)_3k). The best storage stability and the slowest PTX release was observed for PM with larger hydrophobic blocks. On the other hand, smaller sized PM of shorter mPEG_5k-b-p(HPMA-Bz)_5k showed a better tumor penetration in 3D spheroids. Considering better drug retention capacity of the mPEG_5k-b-p(HPMA-Bz)_17k and smaller size of the mPEG_5k-b-p(HPMA-Bz)_5k as two desirable design features, we argue that PM based on these two polymers are the lead candidates for further in vivo studies.

Acoustic radiation force optical coherence elastography for evaluating mechanical properties of soft condensed matters and its biological applications

Evaluating mechanical properties of biological soft tissues and viscous mucus is challenging because of complicated dynamic behaviors. Soft condensed matter models have been successfully used to explain a number of dynamical behaviors. Here, we reported that optical coherence elastography (OCE) is capable of quantifying mechanical properties of soft condensed matters, micellar fluids. A 7.5 MHz focused transducer was utilized to generate acoustic radiation force exerted on the surface of soft condensed matters in order to produce Rayleigh waves. The waves were recorded by optical coherence tomography (OCT). The Kelvin-Voigt model was adopted to evaluate shear modulus and loss modulus of soft condensed matters. The results reported that various concentrations of micellar fluids can provide reasonable ranges of elasticity from 65.71 to 428.78 Pa and viscosity from 0.035 to 0.283 Pa·s, which are close to ranges for actual biological samples, like mucus. OCE might be a promising tool to differentiate pathologic mucus samples from healthy cases as advanced applications in the future.

Dihydroartemisinin and doxorubicin co-loaded Soluplus®-TPGS mixed micelles: formulation characterization, cellular uptake, and pharmacodynamic studies

Clinically, co-delivery of chemotherapeutics has been limited by poor water-solubility and severe systemic toxicity. This study was aimed at integrating the merits of combination chemotherapy and mixed micellar technology and demonstrating the anticancer potential of doxorubicin (DOX) and dihydroartemisinin (DHA) co-loaded Soluplus^®-TPGS mixed micellar system. In this study, physiochemically stable multidrug loaded mixed micelles were successfully prepared, encapsulation efficiencies of DOX and DHA were as high as 90%, and the average diameter of the micelles was 64.27 nm. The cellular uptake of DOX from the mixed micelles increased by 1.3 and 1.2 times for MCF-7 and MCF-7/ADR cell lines, respectively. The micelles were more cytotoxic than free DHA-DOX. Surprisingly, the co-loaded mixed micelles exhibited higher antitumor activity, while the systemic toxicity was reduced during the treatment. Therefore, the DOX and DHA mixed micelle might be a potential, effective, and less toxic drug-delivery system for cancer therapy.

Micelles Structure Development as a Strategy to Improve Smart Cancer Therapy

Micelles as colloidal suspension have attracted considerable attention due to their potential use for both cancer diagnosis and therapy. These structures have proven their ability to deliver poorly water-soluble anticancer drugs, improve drug stability, and have good penetration and site-specificity, leading to enhance therapeutic efficacy. Micelles are composed of hydrophobic and hydrophilic components assembled into nanosized spherical, ellipsoid, cylindrical, or unilamellar structures. For their simple formation, they are widely studied, either by using opposite polymers attachment consisting of two or more block copolymers, or by using fatty acid molecules that can modify themselves in a rounded shape. Recently, hybrid and responsive stimuli nanomicelles are formed either by integration with metal nanoparticles such as silver, gold, iron oxide nanoparticles inside micelles or by a combination of lipids and polymers into single composite. Herein, through this special issue, an updated overview of micelles development and their application for cancer therapy will be discussed.

Cure of tuberculosis using nanotechnology: An overview

Mycobacterium tuberculosis is the causative agent of tuberculosis (TB), a major health issue of the present era. The bacterium inhabits the host macrophage and other immune cells where it modulates the lysosome trafficking protein, hinders the formation of phagolysosome, and blocks the TNF receptor-dependent apoptosis of host macrophage/monocytes. Other limitations such as resistance to and low bioavailability and bio-distribution of conventional drugs aid to their high virulence and human mortality. This review highlights the use of nanotechnology-based approaches for drug formulation and delivery which could open new avenues to limit the pathogenicity of tuberculosis. Moreover phytochemicals, such as alkaloids, phenols, saponins, steroids, tannins, and terpenoids, extracted from terrestrial plants and mangroves seem promising against M. tuberculosis through different molecular mechanisms. Further understanding of the genomics and proteomics of this pathogenic microbe could also help overcome various research gaps in the path of developing a suitable therapy against tuberculosis.

Development of Chitosan-Based pH-Sensitive Polymeric Micelles Containing Curcumin for Colon-Targeted Drug Delivery

pH-sensitive N-naphthyl-N,O-succinyl chitosan (NSCS) and N-octyl-N,O-succinyl chitosan (OSCS) polymeric micelles carriers have been developed to incorporate curcumin (CUR) for colon-targeted drug delivery. The physical entrapment methods (dialysis, co-solvent evaporation, dropping, and O/W emulsion) were applied. The CUR-loaded micelles prepared by the dialysis method presented the highest loading capacity. Increasing initial amount of CUR from 5 to 40 wt% to polymer resulted in the increase in loading capacity of the polymeric micelles. Among the hydrophobic cores, there were no significant differences in the loading capacity of CUR-loaded micelles. The particle sizes of all CUR-loaded micelles were in the range of 120-338 nm. The morphology of the micelles changed after being contacted with medium with different pH values, confirming the pH-responsive properties of the micelles. The release characteristics of curcumin from all CUR-loaded micelles were pH-dependent. The percent cumulative release of curcumin from all CUR-loaded micelles in simulated gastric fluid (SGF) was limited to about 20%. However, the release amount was significantly increased after contacted with simulated intestinal fluid (SIF) (50-55%) and simulated colonic fluid (SCF) (60-70%). The released amount in SIF and SCF was significantly greater than the release of CUR from CUR powder. CUR-loaded NSCS exhibited the highest anti-cancer activity against HT-29 colorectal cancer cells. The stability studies indicated that all CUR-loaded micelles were stable for at least 90 days. Therefore, the colon targeted, pH-sensitive NSCS micelles may have potential to be a prospective candidate for curcumin delivery to the colon.

Preparation of a Mini-Library of Thermo-Responsive Star (NVCL/NVP-VAc) Polymers with Tailored Properties Using a Hexafunctional Xanthate RAFT Agent

A mini-library of star-shaped thermoresponsive polymers having six arms was prepared using a hexafunctional xanthate by reversible addition⁻fragmentation chain transfer (RAFT) polymerization. Star polymers with homopolymeric arms of poly(N-vinylcaprolactam) (PNVCL), copolymeric arms of poly(N-vinylcaprolactam-co-N-vinylpyrrolidone) (PNVCL-co-PNVP) and also arms of block copolymers of PNVCL-b-PVAc, (PNVCL-co-PNVP)-b-PVAc, and combinations of them changing the order of the block was achieved exploiting the R-RAFT synthetic methodology (or R-group approach), wherein the thiocarbonyl group is transferred to the polymeric chain end. Taking advantage of the RAFT benefits, the molecular weight of the star polymers was controlled (Mn = 11,880⁻153,400 g/mol) to yield star polymers of different sizes and lower critical solution temperature (LCST) values. Removing the xanthate group of the star polymers allowed for the introduction of specific functional groups at the ends of the star arms and resulted in an increase of the LCST values. Star PNVCL-b-PVAc diblock copolymers with PVAc contents of 5⁻26 mol % were prepared; the hydrophobic segment (PVAc) is located at the end of the star arms. Interestingly, when the PVAc content was 5⁻7 mol %, the hydrodynamic diameter (Dh) value of the aggregates formed in water was almost the same sa the Dh of the corresponding PNVCL star homopolymers. It is proposed that these star block copolymers self-assemble into single flowerlike micelles, showing great stability in aqueous solution. Star block copolymers with the PVAc hydrophobic block in the core of the star, such as PVAc-b-(PNVCL-co-PNVP), form micellar aggregates in aqueous solution with Dh values in the range from ~115 to 245 nm while maintaining a thermoresponsive behavior. Micellar aggregates of selected star polymers were used to encapsulate methotrexate (MTX) showing their potential in the temperature controlled release of this antineoplasic drug. The importance of the order in which each block constituent is introduced in the arms of the star polymers for their solution/aggregation behavior is demonstrated.

Recent advances in smart biotechnology: Hydrogels and nanocarriers for tailored bioactive molecules depot

Over the past ten years, the global biopharmaceutical market has remarkably grown, with ten over the top twenty worldwide high performance medical treatment sales being biologics. Thus, biotech R&D (research and development) sector is becoming a key leading branch, with expanding revenues. Biotechnology offers considerable advantages compared to traditional therapeutic approaches, such as reducing side effects, specific treatments, higher patient compliance and therefore more effective treatments leading to lower healthcare costs. Within this sector, smart nanotechnology and colloidal self-assembling systems represent pivotal tools able to modulate the delivery of therapeutics. A comprehensive understanding of the processes involved in the self-assembly of the colloidal structures discussed therein is essential for the development of relevant biomedical applications. In this review we report the most promising and best performing platforms for specific classes of bioactive molecules and related target, spanning from siRNAs, gene/plasmids, proteins/growth factors, small synthetic therapeutics and bioimaging probes.

Recent advances in co-delivery systems based on polymeric nanoparticle for cancer treatment

Cancer is a broad term for a class of prevalent diseases as one in three people develop cancer during their lifetime. Although, there are few success stories of cancer therapy, most of the existing medications do not lead to complete recovery. Because of the complexity of cancer, usually a single therapeutic approach is insufficient for the suppression of cancer growth and metastasis. Simultaneous loading and co-delivery of different agents with different physiochemical characteristics to the same tumors have been suggested for minimizing the dose of anticancer drugs and achieving the synergistic therapeutic impacts in cancers treatment. Intense work to develop nanotechnology-based systems as a suitable option for cancer treatment is currently underway. The purpose of this review is to provide an overview of the co-delivery systems based on polymeric nanoparticles including polymeric micelles, dendrimers, poly-d,l-lactide-co-glycolide, polyethylenimine, poly(l-lysine) and chitosan for efficacious cancer therapy.

Polymeric micelles: Basic research to clinical practice

Rapidly developing polymeric micelles as potential targeting carriers has intensified the need for better understanding of the underlying principles related to the selection of suitable delivery materials for designing, characterizing, drug loading, improving stability, targetability, biosafety and efficacy. The emergence of advanced analytical tools such as fluorescence resonance energy transfer and dissipative particle dynamics has identified new dimensions of these nanostructures and their behavior in much greater details. This review summarizes recent efforts in the development of polymeric micelles with respect to their architecture, formulation strategy and targeting possibilities along with their preclinical and clinical aspects. Literature of the past decade is discussed critically with special reference to the chemistry involved in the formation and clinical applications of these versatile materials. Thus, our main objective is to provide a timely update on the current status of polymeric micelles highlighting their applications and the important parameters that have led to successful delivery of drugs to the site of action.

Dually sensitive dextran-based micelles for methotrexate delivery

Temperature and pH-sensitive micelles prepared from dextran grafted with poly(N-isopropylacrylamide) (PNIPAAm)/polyethylene glycol methyl ether (PEGMA) with/without 2-aminoethylmethacrylate (2-AEM) were evaluated as methotrexate delivery systems.

Preparation of Two Types of Polymeric Micelles Based on Poly(β-L-Malic Acid) for Antitumor Drug Delivery

Polymeric micelles represent an effective delivery system for poorly water-soluble anticancer drugs. In this work, two types of CPT-conjugated polymers were synthesized based on poly(β-L-malic acid) (PMLA) derivatives. Folic acid (FA) was introduced into the polymers as tumor targeting group. The micellization behaviors of these polymers and antitumor activity of different self-assembled micelles were investigated. Results indicate that poly(ethylene glycol)-poly(β-L-malic acid)-campotothecin-I (PEG-PMLA-CPT-I, P1) is a grafted copolymer, and could form star micelles in aqueous solution with a diameter of about 97 nm, also that PEG-PMLA-CPT-II (P2) is an amphiphilic block copolymer, and could form crew cut micelles with a diameter of about 76 nm. Both P1 and P2 micelles could improve the cellular uptake of CPT, especially the FA-modified micelles, while P2 micelles showed higher stability, higher drug loading efficiency, smaller size, and slower drug release rate than that of P1 micelles. These results suggested that the P2 (crew cut) micelles possess better stability than that of the P1 (star) micelles and might be a potential drug delivery system for cancer therapy.

Nanocarriers Usage for Drug Delivery in Cancer Therapy

Conventional therapeutic agents have displayed significant shortcomings. For this reason, important achievements have effectively made in biotechnology for delivering the therapeutic agents to the site of action, and diminish side effects. Polymeric carriers, micelles, dendrimers, liposomes, solid lipid carriers, gold carriers, viral carriers, nanotubes and magnetic carriers incorporating cytotoxic therapeutics have developed. To improve biological distribution of therapeutic drugs, some modified carriers have designed in optimal size and modified surface area. Delivery of carriers to target cells could be done by passive and active targeting.

Biodistribution and fate of core-labeled 125I polymeric nanocarriers prepared by Flash NanoPrecipitation (FNP)

Non-invasive medical imaging techniques such as positron emission tomography (PET) imaging are powerful platforms to track the fate of radiolabeled materials for diagnostic or drug delivery applications. Polymer-based nanocarriers tagged with non-standard PET radionuclides with relatively long half-lives (e.g. 64Cu: t1/2 = 12.7 h, 76Br: t1/2 = 16.2h, 89Zr: t1/2 = 3.3 d, 124I: t1/2 = 4.2 d) may greatly expand applications of nanomedicines in molecular imaging and therapy. However, radiolabeling strategies that ensure stable in vivo association of the radiolabel with the nanocarrier remain a significant challenge. In this study, we covalently attach radioiodine to the core of pre-fabricated nanocarriers. First, we encapsulated polyvinyl phenol within a poly(ethylene glycol) coating using Flash NanoPrecipitation (FNP) to produce stable 75 nm and 120 nm nanocarriers. Following FNP, we radiolabeled the encapsulated polyvinyl phenol with 125I via electrophilic aromatic substitution in high radiochemical yields (> 90%). Biodistribution studies reveal low radioactivity in the thyroid, indicating minimal leaching of the radiolabel in vivo. Further, PEGylated [125I]PVPh nanocarriers exhibited relatively long circulation half-lives (t1/2 α = 2.9 h, t1/2 β = 34.9 h) and gradual reticuloendothelial clearance, with 31% of injected dose in blood retained at 24 h post-injection.

CD44 targeted chemotherapy for co-eradication of breast cancer stem cells and cancer cells using polymeric nanoparticles of salinomycin and paclitaxel

This combinational therapy is mainly aimed for complete eradication of tumor by killing both cancer cells and cancer stem cells. Salinomycin (SLM) was targeted towards cancer stem cells whereas paclitaxel (PTX) was used to kill cancer cells. Drug loaded poly (lactic-co-glycolic acid) nanoparticles were prepared by emulsion solvent diffusion method using cationic stabilizer. Size of the nanoparticles (below 150nm) was determined by dynamic light scattering technique and transmission electron microscopy. In vitro release study confirmed the sustained release pattern of SLM and PTX from nanoparticles more than a month. Cytotoxicity studies on MCF-7 cells revealed the toxicity potential of nanoparticles over drug solutions. Hyaluronic acid (HA) was coated onto the surface of SLM nanoparticles for targeting CD44 receptors over expressed on cancer stem cells and they showed the highest cytotoxicity with minimum IC50 on breast cancer cells. Synergistic cytotoxic effect was also observed with combination of nanoparticles. Cell uptake studies were carried out using FITC loaded nanoparticles. These particles showed improved cellular uptake over FITC solution and HA coating further enhanced the effect by 1.5 folds. CD44 binding efficiency of nanoparticles was studied by staining MDA-MB-231 cells with anti CD44 human antibody and CD44(+) cells were enumerated using flow cytometry. CD44(+) cell count was drastically decreased when treated with HA coated SLM nanoparticles indicating their efficiency towards cancer stem cells. Combination of HA coated SLM nanoparticles and PTX nanoparticles showed the highest cytotoxicity against CD44(+) cells. Hence combinational therapy using conventional chemotherapeutic drug and cancer stem cell inhibitor could be a promising approach in overcoming cancer recurrence due to resistant cell population.

Small molecule therapeutic-loaded liposomes as therapeutic carriers: from development to clinical applications

In this review, various methods and mechanisms for encapsulation of small therapeutic molecules in liposomes for targeted delivery and triggered release, as well as their potential in the clinical uses, are discussed.

Micellar carriers for the delivery of multiple therapeutic agents

Multi-drug therapy is described as a simultaneous or sequential administration of two or more drugs with similar or different mechanisms of action and is recognized as a more efficient solution to combat successfully, various ailments. Polymeric micelles (PMs) are self-assemblies of block copolymers providing numerous opportunities for drug delivery. To date various micellar formulations were studied for delivery of drugs, nutraceuticals and genes; a few of them are in clinical trials. It was observed that there is an immense need for the development of PMs embedding multiple therapeutic agents to combat various ailments, including cancers, HIV/AIDS, malaria, multiple sclerosis, hypertension, infectious diseases, cardiovascular and metabolic diseases, immune disorders and many psychiatric disorders. Several combinations of drug-drug, drug-nutraceutical, drug-gene and drug-siRNA explored to date are detailed in this review, with a special emphasis on their potential and future perspectives. A summary of various preparation methods, characterization techniques and applications of PMs are also provided. This review presents a holistic approach on multi-drug delivery using micellar carriers and emphasizes on the development of therapeutic hybrids embedding novel combinations for safer and effective therapy.

Hyperthermia approaches for enhanced delivery of nanomedicines to solid tumors

Drug delivery to solid tumors has received much attention in order to reduce harmful side effects and improve the efficacy of treatment. Different strategies have been utilized with nanoparticle drug delivery systems, or nanomedicines, including passive and active targeting strategies, as well as the incorporation of stimuli sensitivity. Additionally, hyperthermia has been used in combination with such systems to further improve accumulation, localization, penetration, and subsequently efficacy. Localized hyperthermia within the solid tumor tissue can be applied through different mechanisms able to trigger vascular and cellular mechanisms for enhanced delivery of nanomedicines. This review covers the use of nanoparticles in drug delivery, the different methods for inducing localized hyperthermia, combination effects of hyperthermia, and successful strategies for improving the delivery of nanomedicines using hyperthermia.

Tri/tetra-block co-polymeric nanocarriers as a potential ocular delivery system of lornoxicam: in-vitro characterization, and in-vivo estimation of corneal permeation

Polymeric micelles that can deliver drug to intended sites of the eye have attracted much scientific attention recently. The aim of this study was to evaluate the aqueous-based formulation of drug-loaded polymeric micelles that hold significant promise for ophthalmic drug delivery. This study investigated the synergistic performance of mixed polymeric micelles made of linear and branched poly(ethylene oxide)-poly(propylene oxide) for the more effective encapsulation of lornoxicam (LX) as a hydrophobic model drug. The co-micellization process of 10% binary systems combining different weight ratios of the highly hydrophilic poloxamers; Synperonic(®) PE/P84, and Synperonic(®) PE/F127 and the hydrophobic poloxamine counterpart (Tetronic(®) T701) was investigated by means of photon correlation spectroscopy and cloud point. The drug-loaded micelles were tested for their solubilizing capacity towards LX. Results showed a sharp solubility increase from 0.0318 mg/mL up to more than 2.34 mg/mL, representing about 73-fold increase. Optimized formulation was selected to achieve maximum drug solubilizing power and clarity with lowest possible particle size, and was characterized by (1)HNMR analysis which revealed complete encapsulation of the drug within the micelles. Further investigations by histopathological and confocal laser studies revealed the non-irritant nature and good corneal penetrating power of the proposed nano-formulation.

New glycosylated conjugate copolymer N-acetyl-β-D-glucosaminyl-pluronic: Synthesis, self-assembly and biological assays

This work describes the synthesis of a new glycosylated conjugate copolymer, GlcNAc-PEO75-PPO30-PEO75-GlcNAc (GlcNAc-PluronicF68-GlcNAc), using click chemistry from Pluronic(®) F68 and propargyl-2-N-acetamido-2-deoxy-β-D-glucopyranoside. Micelles were prepared by the self-assembly of GlcNAc-PluronicF68-GlcNAc in phosphate-buffered solution. The critical micelle concentration was determined by fluorescence spectroscopy, and the value was found to be equal to 5.8mgmL(-1). The Gibbs free energy (ΔG) of micellization is negative, indicating that the organization of amphiphiles is governed by the hydrophobic effects in an entropy-driven process. The scattering characterization of GlcNAc-PluronicF68-GlcNAc micelles showed a hydrodynamic radius of 8.7nm and negative zeta potential (-21.0±0.9mV). The TEM image evidences the spherical shape of the objects self-assemble into highly regular micelles having a mean diameter of 10nm. The SAXS profile confirmed the spherical shape of the assemblies comprising a swollen PPO core (Rcore=2.25nm) stabilized by PEO chains following Gaussian statistics. The results of the comet assay showed that the GlcNAc-PluronicF68-GlcNAc micelles were not genotoxic, and the cell viability test was higher than 97% for all concentrations, demonstrating that GlcNAc-PluronicF68-GlcNAc is not toxic.