Adsorption of human serum albumin onto glassy carbon surface – Applied to albumin-modified electrode: Mode of protein–ligand interactions

Synthesis and characterization of a nanostructure conductive copolymer based on polyaniline and polylactic acid as an effective substrate in proteins impedimetric biosensing

Despite of all the developments in DNA microarray technology, there is not sufficient knowledge about protein abundance or their function in processes such as proteolysis, phosphorylation. Therefore, there is a significant need for direct detection and quantification of proteins, especially in processes such as proteomics, drug design and disease prediction. The present work introduce the new generation of polymeric substrate based on polyaniline and, polylactic acid, which it was used for impedimetric sensor in detection of proteins in particular for bovine serum albumin (BSA). In this copolymerization, the polylactic acid-block-polyaniline copolymer (PLA-b-PANI) was synthesized to attach polylactic acid and polyaniline using epichlorohydrin as a coupling agent. The structure of synthesized compounds in all steps, were confirmed by FT-IR and, 1H-NMR. The thermal properties and, morphology were analyzed by DSC, TGA, and, SEM. Also the electrochemical characteristics of fabricated PLA-b-PANI electrode were investigated by Electrochemical Impedance Spectroscopy (EIS) and Cyclic Voltammetry (CV). The results demonstrated that morphology of the PLA-b-PANI is sphere shape nanoparticles with dimension less than 100 nanometer diameters and, reasonable thermal properties. PLA-b-PANI was used to modify a screen-printed carbon electrode (SPCE) to fabricate a BSA impedimetric sensor. In order to increase the performance of the proposed impedimetric sensor, optimization of incubation time, pH and amount of PLA-b-PANI were investigated. The results show that the impedimetric sensor has the highest response when the electrode surface is covered with 5 microliters of PLA-b-PANI, and is incubated in BSA solution with pH 6.5 for 5 min. Impedimetric results showed that the PLA-b-PANI has excellent properties in reducing the charge transfer resistance and increasing the electron charge transfer rate. The final impedimetric sensor exhibited good repeatability, reproducibility, and chemical stability within the linear concentration range of 0.1-20 μg L-1 of BSA, and a detection limit of 0.05 μg L-1.

Layered Clay Minerals in Cancer Therapy: Recent Progress and Prospects

Cancer is one of the deadliest diseases, and current treatment regimens suffer from limited efficacy, nonspecific toxicity, and chemoresistance. With the advantages of good biocompatibility, large specific surface area, excellent cation exchange capacity, and easy availability, clay minerals have been receiving ever-increasing interests in cancer treatment. They can act as carriers to reduce the toxic side effects of chemotherapeutic drugs, and some of their own properties can kill cancer cells, etc. Compared with other morphologies clays, layered clay minerals (LCM) have attracted more and more attention due to adjustable interlayer spacing, easier ion exchange, and stronger adsorption capacity. In this review, the structure, classification, physicochemical properties, and functionalization methods of LCM are summarized. The state-of-the-art progress of LCM in antitumor therapy is systematically described, with emphasis on the application of montmorillonite, kaolinite, and vermiculite. Furthermore, the property-function relationships of LCM are comprehensively illustrated to reveal the design principles of clay-based antitumor systems. Finally, foreseeable challenges and outlook in this field are discussed.

Immunosensor for Assessing the Welfare of Trainee Guide Dogs

Cortisol is a well established biomarker hormone that regulates many processes in the body and is widely referred to as the stress hormone. Cortisol can be used as a stress marker to allow for detection of stress levels in dogs during the training process. This test will indicate if they will handle the stress under the training or if they might be more suitable as an assistant or companion dog. An immunosensor for detection of cortisol was developed using electrochemical impedance spectroscopy (EIS). The sensor was characterized using chemical and topographical techniques. The sensor was calibrated and its sensitivity determined using a cortisol concentration range of 0.0005 to 50 μg/mL. The theoretical limit of detection was found to be 3.57 fg/mL. When the immunosensor was tested on canine saliva samples, cortisol was detected and measured within the relevant physiological ranges in dogs.

Chemometrics in investigation of small molecule-biomacromolecule interactions: A review

Chemometrics is chemical discipline in which mathematical and statistical methods are coupled with chemical data to extract useful information which cannot be extracted by the use of conventional methods. When experimental techniques are assisted by chemometric methods, very interesting studies will be performed which enable us to obtain valuable information about the system under our study. Chemico-biological interactions are very useful studies which are performed to obtain information about binding of small molecules with biological macromolecules. Recently, these studies have been assisted by chemometric methods to perform advanced studies which can help us to have a deep insight to them. Literature survey showed us that multivariate analysis of the chemico-biological interactions is becoming popular and nowadays, chemometricians are using multivariate chemometric methods for resolving chemico-biological interactions. This article focuses on the works published in the literature to provide a background for those who are interested to work in this field and finally, the results will be discussed and concluded.

Adsorption and Interaction of Bovine Serum Albumin and Pluronic P103 Triblock Copolymer on a Gold Electrode: Double-Layer Capacitance Measurements

The interactions of proteins and other molecules and their adsorption onto substrates is a fascinating topic that has been applied to surface technologies, biosensors, corrosion studies, biotechnologies, and other fields. The success of these applications requires a previous characterization using some analytical techniques that, ordinarily, are not electrochemical. This work proposes analyzing the variation of the double-layer capacitance obtained through impedance electrochemical spectroscopy as an alternative strategy to show evidence of the interactions between proteins and triblock copolymers. The proposal is supported through the study of the interaction and adsorption of bovine serum albumin (BSA) and a commercial triblock copolymer (P103) in phosphate buffer on a gold electrode. The double-layer capacitance and the apparent interface thickness vs polarization potential curves as well as the potential of zero charge for pure P103 (0.6 wt %, corresponding to 6 g L^-1), pure BSA (3 mg mL^-1), and P103-BSA solutions (0.6 wt % and 3 mg mL^-1, respectively) are sensitive enough to show not only the interaction and the adsorption of the species but also the polarization potential where these interactions are taking place. A qualitative and quantitative analysis concerning the double-layer capacitance behavior is given. The significance and impact of this work is also presented.

Matrix augmentation as an efficient method for resolving interaction of bromocriptine with human serum albumin: trouble shooting and simultaneous resolution

This work reports the results of an interesting study related to the investigation of interactions of bromocriptine (BCP) with human serum albumin (HSA) by mathematicall modelling of voltammetric and spectroscopic data into an augmented data matrix and its resolution by multivariate curve resolution-alternating least squares (MCR-ALS). The quality of the results obtained by MCR-ALS was examined by MCR-BANDS and its outputs confirmed the absence of rotational ambiguities in the MCR-ALS results. BCP-HSA interactions were also modeled by molecular docking methods to verify the results obtained from experimental sections and fortunately, they were compatible. Hard modeling of the experimental data by EQUISPEC helped us to calculate the binding constant of the complex formed from BCP-HSA interactions which was in a good agreement with that of calculated from direct analysis of the experimental data. Finally, with the help of two different amperometric measurements based on BCP-HSA interactions a novel electroanalytical method was developed for biosensing of HSA in serum samples.

Low fouling electrochemical sensing in complex biological media by using the ionic liquid-doped conducting polymer PEDOT: application to voltammetric determination of dopamine

An electrochemical sensor that can resist biofouling even when operated in complex biological medium is developed for the determination of dopamine. It is based on the use of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) that is doped with the water insoluble ionic liquid (IL), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. A glassy carbon electrode modified with PEDOT/IL is shown to enable accurate determination of dopamine, as a model analyte in the presence of high concentrations of proteins, and resist biological fouling even in native serum. It exhibited a low limit of detection of 33 nM for the detection of dopamine, with a wide linear range from 0.2 to 328 μM (at 0.2 V vs. saturated calomel electrode). The PEDOT/IL modified glassy carbon electrode has a porous microstructure, high electrical conductivity and good stability. The sensor can be used to quantify dopamine in human urine samples with satisfying accuracy. Graphical abstract An antifouling electrochemical sensor capable of detecting target in complex biological samples was developed based on the use of a conducting polymer (PEDOT) that was doped with a water insoluble ionic liquid.

Insight into the interaction of human serum albumin with folic acid: A biophysical study

Folic acid (FA) is a water soluble bioactive food constituent from the vitamin B-family complex (B9). FA deficiency can lead to a variety of human health problems, while a high intake of FA can reduce the cytotoxicity of natural killer cells. The main goal of this study was to investigate the interaction of FA with human serum albumin (HSA) at physiological pH using ATR-FTIR, fluorescence spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy in order to understand the role of HSA as a blood transporter for FA in aqueous solution that can be used in different therapies. The quenching of HSA in the presence of FA was followed and the binding constant (K_b) was determined. The variation of electrochemical parameters proved that the FA binds to immobilized HSA and the binding constant was ten times than the value obtained when the interaction takes place between free molecules in solution when studied by fluorescence quenching. The results can be used in future studies to improve drug delivery systems or cellular uptake of folic acid and food components conjugated to HSA nanoparticles or nanocapsules.

Raman studies of the interactions of fibrous carbon nanomaterials with albumin

Adsorption or immobilization of proteins on synthetic surfaces is a key issue in the context of the biocompatibility of implant materials, especially those intended for the needs of cardiac surgery but also for the construction of biosensors or nanomaterials used as drug carriers. The subject of research was the analysis of Raman spectra of two types of fibrous carbon nanomaterials, of great potential for biomedical applications, incubated with human serum albumin (HSA). The first nanomaterial has been created on the layer of MWCNTs deposited by electrophoretic method (EPD) and then covered by thin film of pyrolytic carbon introduced by chemical vapor deposition process (CVD). The second material was formed from carbonized nanofibers prepared via electrospinning (ESCNFs) of polyacrylonitrile (PAN) precursor and then covered with pyrolytic carbon (CVD). The G-band blue-shift towards the position of about 1600cm^-1, observed for both studied surfaces, clearly indicates the albumin (HSA) adhesion to the surface. The G and G' (2D) peak shift was employed to assess the stress build up on the carbon nanomaterials. The surface nano- and micro-topography as well as the method of ordering the carbon nanomaterial has a significant influence on the mode of surface-protein interaction.

Ultrasensitive environmental assessment of xeno-estrogens in water samples using label-free graphene immunosensors

There is a growing interest in the possible environmental health impact posed by endocrine-disrupting chemicals (EDCs). A challenge to the field of endocrine disruption is that these substances are diverse and may not appear to share any structural similarity other than usually being low molecular mass (<1000 Da) compounds. Here we demonstrate the effectiveness of sensor device for the detection of low molecular weight, poorly water soluble, estrogenic compounds E1, E2 and EE2, fabricated by electropolymerization over graphene screen printed electrode (SPE). The PANI/Gr-SPE-devices displayed linear responses to estrogenic substances, in EIS assays, from 0.0975 ng/L to 200 ng/L in water samples, with a detection limit of 0.043 pg/L for E1, 0.19 ng/L for E2 and 0.070 pg/L for EE2 which is lower than other current biosensing techniques. This portable, disposable immunosensor offers a solution for immediate measurement at sample collection sites, due to its excellent sensitivity and selectivity when testing water samples obtained directly from rivers and waste water treatment facilities. The simple screen printing production method will enable the low cost, high volume production required for this type of environmental analysis.

Polyaniline-graphene based α-amylase biosensor with a linear dynamic range in excess of 6 orders of magnitude

α-amylase is an established marker for diagnosis of pancreatic and salivary disease, and recent research has seen a substantial expansion of its use in therapeutic and diagnostic applications for infection, cancer and wound healing. The lack of bedside monitoring devices for α-amylase detection has hitherto restricted the clinical progress of such applications. We have developed a highly sensitive α-amylase immunosensor platform, produced via in situ electropolymerization of aniline onto a screen-printed graphene support (SPE). Covalently binding an α-amylase specific antibody to a polyaniline (PANI) layer and controlling device assembly using electrochemical impedance spectroscopy (EIS), we have achieved a highly linear response against α-amylase concentration. Each stage of the assembly was characterized using a suite of high-resolution topographical, chemical and mechanical techniques. Quantitative, highly sensitive detection was demonstrated using an artificially spiked human blood plasma samples. The device has a remarkably wide limit of quantification (0.025-1000IU/L) compared to α-amylase assays in current clinical use. With potential for simple scale up to volume manufacturing though standard semiconductor production techniques and subsequently clinical application, this biosensor will enable clinical benefit through early disease detection, and better informed administration of correct therapeutic dose of drugs used to treat α-amylase related diseases.

An electrochemical genosensor for Leishmania major detection based on dual effect of immobilization and electrocatalysis of cobalt-zinc ferrite quantum dots

Identification of Leishmania parasites is important in diagnosis and clinical studies of leishmaniasis. Although epidemiological and clinical methods are available, they are not sufficient for identification of causative agents of leishmaniasis. In the present study, quantum dots of magnetic cobalt-zinc ferrite (Co0.5Zn0.5Fe2O4) were synthesized and characterized by physicochemical methods. The quantum dots were then employed as an electrode modifier to immobilize a 24-mer specific single stranded DNA probe, and fabrication of a label-free, PCR-free and signal-on electrochemical genosensor for the detection of Leishmania major. Hybridization of the complementary single stranded DNA sequence with the probe under the selected conditions was explored using methylene blue as a redox marker, utilizing the electrocatalytic effect of the quantum dots on the methylene blue electroreduction process. The genosensor could detect a synthetic single stranded DNA target in a range of 1.0×10(-11) to 1.0×10(-18)molL(-1) with a limit of detection of 2.0×10(-19)molL(-1), and genomic DNA in a range of 7.31×10(-14) to 7.31×10(-6)ngμL(-1) with a limit of detection of 1.80×10(-14)ngμL(-1) with a high selectivity and sensitivity.

Zepto-molar electrochemical detection of Brucella genome based on gold nanoribbons covered by gold nanoblooms

Gold nanoribbons covered by gold nanoblooms were sonoelectrodeposited on a polycrystalline gold surface at −1800 mV (vs. AgCl) with the assistance of ultrasound and co-occurrence of the hydrogen evolution reaction. The nanostructure, as a transducer, was utilized to immobilize a Brucella-specific probe and fabrication of a genosensor, and the process of immobilization and hybridization was detected by electrochemical methods, using methylene blue as a redox marker. The proposed method for detection of the complementary sequence, sequences with base-mismatched (one-, two- and three-base mismatches), and the sequence of non-complementary sequence was assayed. The fabricated genosensor was evaluated for the assay of the bacteria in the cultured and human samples without polymerase chain reactions (PCR). The genosensor could detect the complementary sequence with a calibration sensitivity of 0.40 μA dm³ mol⁻¹, a linear concentration range of 10 zmol dm⁻³ to 10 pmol dm⁻³, and a detection limit of 1.71 zmol dm⁻³.

Electrochemical Characterization of Protein Adsorption onto YNGRT-Au and VLGXE-Au Surfaces

The adsorption of the proteins CD13, mucin and bovine serum albumin on VLGXE-Au and YNGRT-Au interfaces was monitored by electrochemical impedance spectroscopy in the presence of [Fe(CN)₆]^3−/4−. The hydrophobicity of the Au surface was tailored using specific peptides, blocking agents and diluents. The combination of blocking agents (ethanolamine or n-butylamine) and diluents (hexanethiol or 2-mercaptoethanol) was used to prepare various peptide-modified Au surfaces. Protein adsorption onto the peptide-Au surfaces modified with the combination of n-butylamine and hexanethiol produced a dramatic decrease in the charge transfer resistance, R_ct, for all three proteins. In contrast, polar peptide-surfaces induced a minimal change in R_ct for all three proteins. Furthermore, an increase in R_ct was observed with CD13 (an aminopeptidase overexpressed in certain cancers) in comparison to the other proteins when the VLGXE-Au surface was modified with n-butylamine as a blocking agent. The electrochemical data indicated that protein adsorption may be modulated by tailoring the peptide sequence on Au surfaces and that blocking agents and diluents play a key role in promoting or preventing protein adsorption. The peptide-Au platform may also be used for targeting cancer biomarkers with designer peptides.

Unzipped carbon nanotubes: analytical and binding applications of semisynthetic phlebotropic flavonoid, diosmin

Present study describes the utility of unzipped carbon nanotubes as electrochemical sensing platform for the determination of diosmin in pharmaceutical formulations and for the investigation of its binding to human serum albumin.

Electrochemical study of nanoporous gold revealing anti-biofouling properties

Schematic shows the morphology of the adsorbed BSA layer on nanoporous gold. Initial response of the electrode from biofouling resulted in faradaic current decay followed by its regeneration due to slow diffusion of analytes through the fouled layer.

A study of double stranded DNA adsorption on aluminum surface by means of electrochemical impedance spectroscopy

Immobilization of DNA on the solid surfaces is one of the goals in bio- and nano-technologies. Adsorption of double stranded DNA on the surface of aluminum was electrochemically studied by means of impedance spectroscopy. Nyquist diagram of aluminum in a tris (hydroxymethyl) ammoniummethane-HCl (Tris-HCl) buffer solution, pH 7.4 consisted of two overlapped capacitive semicircles. The high-frequency semicircle was related to the passivity of Cl(-)-containing aluminum species in the oxide layer, and low-frequency semicircle was attributed to metal dissolution. When DNA was added to the Tris-HCl buffer solution, Nyquist diagrams represented an inductive loop at low frequencies due to the adsorption of DNA on the pre-covered aluminum surface by hydroxy-contained species. The DNA adsorption on the aluminum surface was also confirmed by X-ray photoelectron spectroscopy. Open circuit potential variation with time also indicated the chemical adsorption of DNA on the aluminum surface.

Investigation of interaction of nuclear fast red with human serum albumin by experimental and computational approaches

For the first time, interaction of nuclear fast red (NFR) with human serum albumin (HSA) was studied by experimental and computational approaches. Firstly, experimental measurements including fluorescence spectroscopy (F), UVvis spectrophotometry (UVvis), cyclic voltammetry (CV), differential pulse voltammetry (DPV) and linear sweep voltammetry (LSV) were separately used to investigate the interaction of NFR with HSA and interesting thermodynamics information was obtained from these studies. Secondly, new information including electrochemical behavior of NFR-HSA complex species, relative concentrations of the various reacting species and effects of NFR on the sub-structure of HSA was obtained by applying multivariate curve resolution-alternating least squares (MCR-ALS). In this case, a row- and column-wise augmented matrix was built with DPV, LSV, F and UVvis sub-matrices and resolved by MCR-ALS. Surprisingly, by this method two NFR-HSA complex species with different stoichiometries and different electrochemical behaviors were found. Furthermore, by the use of the recorded voltammetric and spectroscopic data the binding constants of complex species were computed by EQUISPEC (a hard-modeling algorithm). Finally, the binding of NFR to HSA was modeled by molecular modeling and molecular dynamics (MD) simulations methods. Excellent agreement was found between experimental and computational results. Both experimental and computational results suggested that the NFR binds mainly to the sub-domain IIA of HSA.

Lignosulfonate-modified electrodes: electrochemical properties and electrocatalysis of NADH oxidation

Lignosulfonic acid (LS1) and partially desulfonated lignosulfonic acid (LS2) were oxidatively deposited on a preactivated glassy carbon (GC) electrode, giving rise to redox active films showing three distinct redox couples at midpeak potentials (E degrees ') of 0.22, 0.44, and 0.53 V (vs Ag/AgCl in 0.1 M H(2)SO(4)). The redox activity was assigned to quinone moieties of different degrees of substitution, formed upon the oxidation of electroactive groups in the lignosulfonate structure. The most predominant couple (E degrees ' = 0.44 V) shifted negatively with pH at a rate of 59.5 mV per pH unit. In neutral electrolytes, the LS1- and LS2-modified electrodes behaved as anionic coatings, showing an increase in the charge transfer resistance (R(ct)) for the ferrocyanide/ferricyanide redox couple. The change in R(ct) was highly dependent on the LS sulfonation degree, and in comparison to an unmodified electrode it increased by ca. 490% for LS1-modified electrodes and by only 53% for LS2-modified electrodes. The LS-modified electrodes showed high electrocatalytic activity toward oxidation of reduced nicotinamide adenine dinucleotide (NADH). Electrocatalysis was studied in TRIS-HNO(3) buffers having pH of 5.0, 7.5, and 8.5 in the absence and presence of 20 mM Mg(2+), using the rotating disk electrode technique. Determined kinetic constants revealed that the impact of electrocatalysis depended strongly on the pH, the LS sulfonation degree, and the presence of bivalent metal ions. At fixed pH, the observed oxidation rate constant was lower for LS1-based electrodes than for LS2-based electrodes. On the other hand, the relative enhancement of this constant caused by the presence of Mg(2+) ions was much higher for LS1-based electrodes than for LS2-based electrodes. This phenomenon was explained by the participation of sulfonic groups in the formation of a ternary complex between quinone moiety, metal ions, and NADH. The values of other kinetic constants, including the Michaelis-Menten constant (K(M)), suggested that the formation of such a complex is preferred in alkaline pHs.