Roughened TiO2 film electrodes for electrocatalytic reduction of oxalic acid to glyoxylic acid

Evaluating the native oxide of titanium as an electrocatalyst for oxalic acid reduction

Herein, we show that unmodified titanium electrodes bearing the naturally-forming native TixOy coating display superior activity for the electroreduction of oxalic acid to glyoxylic acid and glycolic acid compared to Ti-based electrodes that have been deliberately modified for this purpose, in terms of both oxalic acid conversion and overall yields of reduced products.

Alanine Formation in a Zero-Gap Flow Cell and the Role of TiO2/Ti Electrocatalysts

The electrochemical synthesis of α ${\alpha }$ -amino acids at room temperature and pressure is a sustainable alternative to conventional methods like microbial fermentation and Strecker synthesis. A custom-built zero-gap flow electrolyzer was used to study the electrosynthesis of alanine via the electrocatalytic reductive amination (ERA) of the corresponding biomass-derivable α ${\alpha }$ -keto acid precursor - pyruvic acid (PA), and hydroxylamine (NH2OH) at very low pH. Non-toxic, abundant, and easy to prepare TiO2/Ti electrocatalysts were utilized as the cathode. Three TiO2/Ti felt electrodes with different oxide thicknesses were prepared and their characterization results were correlated with their respective electrochemical performance in terms of Faradaic efficiency η ${\eta }$ , and partial current densityj ‾ ${\left|\overline{j}\right|}$ . Cyclic voltammetry indicated a different electrocatalytic reduction process on hydrothermally treated electrodes, compared to thermally oxidized ones. Hydrothermally treated electrodes were also found to have the thickest porous anatase layer and achieved 50-75 % alanine conversion efficiencies. Optimization showed that the cell potential, reactant flow rate and the PA: NH2OH ratio were crucial parameters in determining the conversion efficiency. η ${\eta }$ andj ‾ ${\left|\overline{j}\right|}$ were found to significantly decrease when an excess of is used and, an optimal alanine η ${\eta }$ of 75 % was achieved at 2.0 V applied cell potential and 10 mL/h reactant flow rate.

Highly Efficient Electrosynthesis of Glycine over an Atomically Dispersed Iron Catalyst

Glycine is a nonessential amino acid that plays a vital role in various biological activities. However, the conventional synthesis of glycine requires sophisticated procedures or toxic feedstocks. Herein, we report an electrochemical pathway for glycine synthesis via the reductive coupling of oxalic acid and nitrate or nitrogen oxides over atomically dispersed Fe-N-C catalysts. A glycine selectivity of 70.7% is achieved over Fe-N-C-700 at -1.0 V versus RHE. Synergy between the FeN3C structure and pyrrolic nitrogen in Fe-N-C-700 facilitates the reduction of oxalic acid to glyoxylic acid, which is crucial for producing glyoxylic acid oxime and glycine, and the FeN3C structure could reduce the energy barrier of *HOOCCH2NH2 intermediate formation thus accelerating the glyoxylic acid oxime conversion to glycine. This new synthesis approach for value-added chemicals using simple carbon and nitrogen sources could provide sustainable routes for organonitrogen compound production.

Promoting Electrocatalytic Hydrogenation of Oxalic Acid to Glycolic Acid via an Al3+ Ion Adsorption Strategy Coupled with Ethylene Glycol Oxidation

Electrocatalytic hydrogenation (ECH) of oxalic acid (OX) to produce glycolic acid (GA), an important building block of biodegradable polymers as well as application in various branches of chemistry, has attracted extensive attention in the industry, while it still encounters challenges of low reaction rate and selectivity. Herein, we reported a cation adsorption strategy to realize the efficient ECH of OX to GA by adsorbing Al³⁺ ions on an anatase titanium dioxide (TiO₂) nanosheet array, achieving 2-fold enhanced GA productivity (1.3 vs 0.65 mmol cm^-2 h^-1) with higher Faradaic efficiency (FE) (85 vs 69%) at -0.74 V vs RHE. We reveal that the Al³⁺ adatoms on TiO₂ both act as electrophilic adsorption sites to enhance the carbonyl (C═O) adsorption of OX and glyoxylic acid (intermediate) and also promote the generation of reactive hydrogen (H*) on TiO₂, thus promoting the reaction rate. This strategy is demonstrated effective for different carboxylic acids. Furthermore, we realized the coproduction of GA at the bipolar of a H-type cell by pairing ECH of OX (at cathode) and electrooxidation of ethylene glycol (at anode), demonstrating an economical manner with maximum electron economy.

Advanced (photo)electrocatalytic approaches to substitute the use of fossil fuels in chemical production

Electrification of the chemical industry for carbon-neutral production requires innovative (photo)electrocatalysis. This study highlights the contribution and discusses recent research projects in this area, which are relevant case examples to explore new directions but characterised by a little background research effort. It is organised into two main sections, where selected examples of innovative directions for electrocatalysis and photoelectrocatalysis are presented. The areas discussed include (i) new approaches to green energy or H2 vectors, (ii) the production of fertilisers directly from the air, (iii) the decoupling of the anodic and cathodic reactions in electrocatalytic or photoelectrocatalytic devices, (iv) the possibilities given by tandem/paired reactions in electrocatalytic devices, including the possibility to form the same product on both cathodic and anodic sides to "double" the efficiency, and (v) exploiting electrocatalytic cells to produce green H2 from biomass. The examples offer hits to expand current areas in electrocatalysis to accelerate the transformation to fossil-free chemical production.

Electrocatalytic Hydrogenation of Biomass-Derived Organics: A Review

Sustainable energy generation calls for a shift away from centralized, high-temperature, energy-intensive processes to decentralized, low-temperature conversions that can be powered by electricity produced from renewable sources. Electrocatalytic conversion of biomass-derived feedstocks would allow carbon recycling of distributed, energy-poor resources in the absence of sinks and sources of high-grade heat. Selective, efficient electrocatalysts that operate at low temperatures are needed for electrocatalytic hydrogenation (ECH) to upgrade the feedstocks. For effective generation of energy-dense chemicals and fuels, two design criteria must be met: (i) a high H:C ratio via ECH to allow for high-quality fuels and blends and (ii) a lower O:C ratio in the target molecules via electrochemical decarboxylation/deoxygenation to improve the stability of fuels and chemicals. The goal of this review is to determine whether the following questions have been sufficiently answered in the open literature, and if not, what additional information is required:(1)What organic functionalities are accessible for electrocatalytic hydrogenation under a set of reaction conditions? How do substitutions and functionalities impact the activity and selectivity of ECH?(2)What material properties cause an electrocatalyst to be active for ECH? Can general trends in ECH be formulated based on the type of electrocatalyst?(3)What are the impacts of reaction conditions (electrolyte concentration, pH, operating potential) and reactor types?

Electrochemical hydrogenation of non-aromatic carboxylic acid derivatives as a sustainable synthesis process: from catalyst design to device construction

Electrochemical hydrogenation of a carboxylic acid using water as a hydrogen source is an environmentally friendly synthetic process for upgrading bio-based chemicals. We systematically studied electrochemical hydrogenation of non-aromatic carboxylic acid derivatives on anatase TiO2 by a combination of experimental analyses and density functional theory calculations, which for the first time shed light on mechanistic insights for the electrochemical hydrogenation of carboxylic acids. Development of a substrate permeable TiO2 cathode enabled construction of a flow-type electrolyser, i.e., a so-called polymer electrode alcohol synthesis cell (PEAEC) for the continuous synthesis of an alcoholic compound from a carboxylic acid. We demonstrated the highly efficient and selective conversion of oxalic acid to produce glycolic acid, which can be regarded as direct electric power storage into an easily treatable alcoholic compound.

Carbon-neutral energy cycles using alcohols

We demonstrated carbon-neutral (CN) energy circulation using glycolic acid (GC)/oxalic acid (OX) redox couple. Here, we report fundamental studies on both catalyst search for power generation process, i.e. GC oxidation, and elemental steps for fuel generation process, i.e. OX reduction, in CN cycle. The catalytic activity test on various transition metals revealed that Rh, Pd, Ir, and Pt have preferable features as a catalyst for electrochemical oxidation of GC. A carbon-supported Pt catalyst in alkaline conditions exhibited higher activity, durability, and product selectivity for electrooxidation of GC rather than those in acidic media. The kinetic study on OX reduction clearly indicated that OX reduction undergoes successive two-electron reductions to form GC. Furthermore, application of TiO₂ catalysts with large specific area for electrochemical reduction of OX facilitates the selective formation of GC.