Electrochemically reduced graphene oxide modified acetylene black paste electrode for the sensitive determination of bisphenol A

Carboxymethylcellulose reinforced starch films and rapid detection of spoiled beverages

The integrity of the packaging of a liquid foodstuff makes it difficult to detect spoilage. Therefore, it is important to develop a sensitive, fast and real-time material for liquid food detection. CMC, as lignocellulose derivatives and starch are widely used in the food industry. In this study, starch films with pH-responsive properties are successfully prepared from full-component starch and corn amylopectin (CA) by adding CMC. The effects of CMC on the mechanical properties, morphology characteristics, physical and chemical structures, stability and pH responsiveness of the starch films are analyzed. The starch/CMC-1.0 g composite films display good electrical conductivity and reduce the resistance of the composite film by two orders of magnitude. The composite films have pH response ability; in the simulation of orange juice spoilage experiment, the CA/CMC composite film has a more sensitive current response and was more suitable for the application to liquid food quality detection. Additionally, the starch/CMC composite films have potential applications for rapid detection and real-time monitoring of the safety of liquid food.

Ion-Modified Starch Film Enables Rapid Detection of Spoiled Fruit Juices

Juice, as a liquid foodstuff, is subject to spoilage and damage due to complications during transport and storage. The appearance of intact outer packaging often makes spoilage and damage difficult to detect. Therefore, it of particular importance to develop a fast, real-time material to evaluate liquid foodstuffs. In this paper, starch films with pH response characteristics are successfully prepared by inorganic ion modification by utilizing whole starch and amylopectin as raw materials. The mechanical properties, stability properties, hydrophilic properties and pH electrical signal response indices of the films are analyzed and measured. The films exhibit good electrical conductivity values with 1.0 mL of ion addition (10 mmol/L), causing the composite film to respond sensitively to solutions with varying pH values. In the test of spoiled orange juice, the full-component corn starch (CS) film has more sensitive resistance and current responses, which is more conducive for applications in the quality monitoring of juice. The results indicate that modified starch films can potentially be applied in the real-time monitoring of the safety of liquid foodstuffs.

Electrochemical detection of bisphenols in food: A review

Bisphenols (BPs) are worldwide used organic compounds in plastics, belonging to the group of endocrine disrupting chemicals (EDCs) which exhibits endocrine disruption to beings. Migration of BPs from food contact materials like plastic containers, epoxy coatings in metal cans and thermal papers, would results in bioaccumulation of BPs in human beings, causing adverse health effects. Therefore, sensitive and selective determination of BPs in food is needed. Among different strategies have been explored for the detection of BPs, electrochemical sensors with relatively high sensitivity and fast response are promising. This paper is devoted to comprehensively review the developed electrochemical methods for BPs sensing in food, so that to find a direction for developing low cost, high accuracy and compatibility sensors toward the sensitive and selective detection of BPs. Different electrochemical technologies categorized by recognition agents, aptamers, enzymes, molecularly imprinted polymers and nanomaterials are discussed and summarized in their mechanisms, usages, merits and limitations. The challenges and further perspectives in the development of electrochemical sensors is also discussed.

Fabrication of Amine-Modified Magnetite-Electrochemically Reduced Graphene Oxide Nanocomposite Modified Glassy Carbon Electrode for Sensitive Dopamine Determination

Amine-modified magnetite (NH₂-Fe₃O₄)/reduced graphene oxide nanocomposite modified glassy carbon electrodes (NH₂-Fe₃O₄/RGO/GCEs) were developed for the sensitive detection of dopamine (DA). The NH₂-Fe₃O₄/RGO/GCEs were fabricated using a drop-casting method followed by an electrochemical reduction process. The surface morphologies, microstructure and chemical compositions of the NH₂-Fe₃O₄ nanoparticles (NPs), reduced graphene oxide (RGO) sheets and NH₂-Fe₃O₄/RGO nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-Ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy. The electrochemical behaviors of DA on the bare and modified GCEs were investigated in phosphate buffer solution (PBS) by cyclic voltammetry (CV). Compared with bare electrode and RGO/GCE, the oxidation peak current (i_pa) on the NH₂-Fe₃O₄/RGO/GCE increase significantly, owing to the synergistic effect between NH₂-Fe₃O₄ NPs and RGO sheets. The oxidation peak currents (i_pa) increase linearly with the concentrations of DA in the range of 1 × 10^-8 mol/L - 1 × 10^-7 mol/L, 1 × 10^-7 mol/L - 1 × 10^-6 mol/L and 1 × 10^-6 mol/L - 1 × 10^-5 mol/L. The detection limit is (4.0 ± 0.36) ×10^-9 mol/L (S/N = 3). Moreover, the response peak currents of DA were hardly interfered with the coexistence of ascorbic acid (AA) and uric acid (UA). The proposed NH₂-Fe₃O₄/RGO/GCE is successfully applied to the detection of dopamine hydrochloride injections with satisfactory results. Together with low cost, facile operation, good selectivity and high sensitivity, the NH₂-Fe₃O₄/RGO/GCEs have tremendous prospects for the detection of DA in various real samples.

Preparation of Cu₂O-Reduced Graphene Nanocomposite Modified Electrodes towards Ultrasensitive Dopamine Detection

Cu₂O-reduced graphene oxide nanocomposite (Cu₂O-RGO) was used to modify glassy carbon electrodes (GCE), and applied for the determination of dopamine (DA). The microstructure of Cu₂O-RGO nanocomposite material was characterized by scanning electron microscope. Then the electrochemical reduction condition for preparing Cu₂O-RGO/GCE and experimental conditions for determining DA were further optimized. The electrochemical behaviors of DA on the bare electrode, RGO- and Cu₂O-RGO-modified electrodes were also investigated using cyclic voltammetry in phosphate-buffered saline solution (PBS, pH 3.5). The results show that the oxidation peaks of ascorbic acid (AA), dopamine (DA), and uric acid (UA) could be well separated and the peak-to-peak separations are 204 mV (AA-DA) and 144 mV (DA-UA), respectively. Moreover, the linear response ranges for the determination of 1 × 10⁻⁸ mol/L~1 × 10⁻⁶ mol/L and 1 × 10⁻⁶ mol/L~8 × 10⁻⁵ mol/L with the detection limit 6.0 × 10⁻⁹ mol/L (S/N = 3). The proposed Cu₂O-RGO/GCE was further applied to the determination of DA in dopamine hydrochloride injections with satisfactory results.

The effect of tunable morphology on the potential application of p(acrylic acid-co-2-ethylhexyl acrylate)/silica nanohybrids

The present study deals with the one-pot synthesis of acrylate copolymers/silica latexes through the use of simultaneous radical polymerization of acrylic monomers and a silica sol-gel precursor. In presence of 3-methacryloxypropyltrimethoxysilane (γ-MPS) and 3-aminopropyltriethoxysilane (APTS), compatibility of acrylate chains to the silica species was improved by the chemical bonds as revealed by Fourier transform infrared spectroscopy (FTIR) analysis. Transmission electron microscopy (TEM) demonstrated the successful formation of p(acrylic acid-co-2-ethylhexyl acrylate)/silica nanohybrids with core-shell morphology. The nanohybrids have been used to modify a glassy carbon electrode (GCE). Cyclic voltammetry and electrochemical impedance spectra were utilized to investigate the properties of the modified electrode in a 1.0 m KCl solution that contained 1.0 mm K4[Fe(CN)6]/K3[Fe(CN)6], and the interface properties of electrode surfaces. The result showed a dramatic decrease in redox activity as compared to the bare GCE electrode. This revealed a slight increase in electron transfer resistance and the conductivity of the copolymer oligomers and silica species in the hybrid nanostructure. All the electrochemical results illustrated that the p(acrylic acid-co- 2-ethylhexyl acrylate)/silica nanohybrids could immobilize the selective analytes on the electrodes, which had electrochemical catalytic activity. The barrier properties of the hybrid films were also examined via ultraviolet (UV) absorption capacity of the films. It could be concluded that the adsorption capacity was a function of the silica content and uniform dispersion of the nanoparticles in the resultant films.

Advances in sensing and biosensing of bisphenols: A review

Bisphenols (BPs) are well known endocrine disrupting chemicals (EDCs) that cause adverse effects on the environment, biotic life and human health. BPs have been studied extensively because of an increasing concern for the safety of the environment and for human health. They are major raw materials for manufacturing polycarbonates, thermal papers and epoxy resins and are considered hazardous environmental contaminants. A vast array of sensors and biosensors have been developed for the sensitive screening of BPs based on carbon nanomaterials (carbon nanotubes, fullerenes, graphene and graphene oxide), quantum dots, metal and metal oxide nanocomposites, polymer nanocomposites, metal organic frameworks, ionic liquids and molecularly imprinted polymers. This review is devoted mainly to a variety of sensitive, selective and reliable sensing and biosensing methods for the detection of BPs using electrochemistry, fluorescence, colorimetry, surface plasmon resonance, luminescence, ELISAs, circular dichroism, resonance Rayleigh scattering and adsorption techniques in plastic products, food samples, food packaging, industrial wastes, pharmaceutical products, human body fluids and many other matrices. It summarizes the advances in sensing and biosensing methods for the detection of BPs since 2010. Furthermore, the article discusses challenges and future perspectives in the development of novel sensing methods for the detection of BP analogs.

Zwitterionic Surfactant Modified Acetylene Black Paste Electrode for Highly Facile and Sensitive Determination of Tetrabromobisphenol A

A electrochemical sensor for the highly sensitive detection of tetrabromobisphenol A (TBBPA) was fabricated based on acetylene black paste electrode (ABPE) modified with 3-(N,N-Dimethylpalmitylammonio) propanesulfonate (SB3-16) in this study. The peak current of TBBPA was significantly enhanced at SB3-16/ABPE compared with unmodified electrodes. To further improve the electrochemical performance of the modified electrode, corresponding experimental parameters such as the length of hydrophobic chains of zwitterionic surfactant, the concentration of SB3-16, pH value, and accumulation time were examined. The peak currents of TBBPA were found to be linearly correlated with its concentrations in the range of 1 nM to 1 µM, with a detection limit of 0.4 nM. Besides, a possible mechanism was also discussed, and the hydrophobic interaction between TBBPA and the surfactants was suggested to take a leading role in enhancing the responses. Finally, this sensor was successfully employed to detect TBBPA in water samples.

Molecular Dynamics Simulations of the Permeation of Bisphenol A and Pore Formation in a Lipid Membrane

Bisphenol A (BPA) is particularly considered as one of the most suspicious endocrine disruptors. Exposure to BPA may bring about possible human toxicities, such as cancerous tumors, birth defects and neoteny. One of the key issues to understand its toxicities is how BPA enters cells. In this paper, we perform molecular dynamics simulations to explore the interactions between BPA and a phospholipid membrane (dipalmitoylphosphatidylcholine, DPPC bilayer). The simulation results show that BPA can easily enter the membrane from the aqueous phase. With the increasing concentrations of BPA in the membrane, BPA tends to aggregate and form into cluster. Meanwhile, several DPPC lipids are pulled out from each leaflet and adsorbed on the cluster surface, leading to pore formation. Detailed observations indicate that the lipid extraction results mainly from the dispersion interactions between BPA cluster and lipid tails, as well as weak electrostatic attractions between lipid headgroups and the two hydroxyl groups on BPA. The lipid extraction and pore formation may cause cell membrane damage and are of great importance to uncover BPA’s cytotoxicity.

Sensitive Adsorptive Voltammetric Method for Determination of Bisphenol A by Gold Nanoparticle/Polyvinylpyrrolidone-Modified Pencil Graphite Electrode

A novel electrochemical sensor gold nanoparticle (AuNP)/polyvinylpyrrolidone (PVP) modified pencil graphite electrode (PGE) was developed for the ultrasensitive determination of Bisphenol A (BPA). The gold nanoparticles were electrodeposited by constant potential electrolysis and PVP was attached by passive adsorption onto the electrode surface. The electrode surfaces were characterized by electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). The parameters that affected the experimental conditions were researched and optimized. The AuNP/PVP/PGE sensor provided high sensitivity and selectivity for BPA recognition by using square wave adsorptive stripping voltammetry (SWAdSV). Under optimized conditions, the detection limit was found to be 1.0 nM. This new sensor system offered the advantages of simple fabrication which aided the expeditious replication, low cost, fast response, high sensitivity and low background current for BPA. This new sensor system was successfully tested for the detection of the amount of BPA in bottled drinking water with high reliability.

Electrochemical determination of bisphenol A at ordered mesoporous carbon modified nano-carbon ionic liquid paste electrode

A simple bisphenol A (BPA) sensor was successfully fabricated based on ordered mesoporous carbon CMK-3 modified nano-carbon ionic liquid paste electrode (CMK-3/nano-CILPE). The nanostructure of CMK-3 and the surface morphologies of modified electrodes were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Electrochemical properties of the fabricated electrodes were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The fabricated sensor displayed excellent electroactivity towards bisphenol A using linear sweep voltammetry (LSV). Experimental conditions influencing the analytical performance of the modified electrode were optimized. Under optimal conditions, the oxidation peak current was proportional to BPA concentration in the range from 0.2 μM to 150 μM with a detection limit of 0.05 μM (S/N=3). This method was successfully used for determination of BPA leached from drinking bottle and plastic bag with good recoveries.

Construction of a nanostructure-based electrochemical sensor for voltammetric determination of bisphenol A

A novel carbon paste electrode modified with graphene oxide nanosheets and an ionic liquid (n-hexyl-3-methylimidazolium hexafluoro phosphate) was fabricated. The electrochemical study of the modified electrode, as well as its efficiency for voltammetric oxidation of bisphenol A, is described. The electrode was also employed to study the electrochemical oxidation of bisphenol A, using cyclic voltammetry, chronoamperometry, square wave voltammetry and electrochemical impedance spectroscopy as diagnostic techniques. Square wave voltammetry exhibits a linear dynamic range from 9.0 × 10(-8) to 2.5 × 10(-4) M and a detection limit of 55.0 nM for bisphenol A. Finally, this new sensor was used for determination of bisphenol A in water samples using the standard addition method.

Amperometric determination of promethazine in tablets using an electrochemically reduced graphene oxide modified electrode

Graphene films were prepared on a glassy carbon electrode for amperometric determination of promethazine hydrochloride in pharmaceutical products.

Electrochemical determination of bisphenol A in plastic bottled drinking water and canned beverages using a molecularly imprinted chitosan-graphene composite film modified electrode

Herein, a novel electrochemical sensor based on an acetylene black paste electrode modified with molecularly imprinted chitosan-graphene composite film for sensitive and selective detection of bisphenol A (BPA) has been developed. Several important parameters controlling the performance of the sensor were investigated and optimised. The imprinted sensor offers a fast response and sensitive BPA quantification. Under the optimal conditions, a linear range from 8.0 nM to 1.0 μM and 1.0 to 20 μM for the detection of BPA was observed with the detection limit of 6.0 nM (S/N=3). Meanwhile, the fabricated sensor showed excellent specific recognition to template molecule among the structural similarities and coexistence substances. Furthermore, this imprinted electrochemical sensor was successfully employed to detect BPA in plastic bottled drinking water and canned beverages.