Nonenzymatic amperometric determination of hydrogen peroxide by graphene and gold nanorods nanocomposite modified electrode

Enhancing electrochemical sensing through the use of functionalized graphene composites as nanozymes

Graphene-based nanozymes possess inherent nanomaterial properties that offer not only a simple substitute for enzymes but also a versatile platform capable of bonding with complex biochemical environments. The current review discusses the replacement of enzymes in developing biosensors with nanozymes. Functionalization of graphene-based materials with various nanoparticles can enhance their nanozymatic properties. Graphene oxide functionalization has been shown to yield graphene-based nanozymes that closely mimic several natural enzymes. This review provides an overview of the classification, current state-of-the-art development, synthesis routes, and types of functionalized graphene-based nanozymes for the design of electrochemical sensors. Furthermore, it includes a summary of the application of functionalized graphene-based nanozymes for constructing electrochemical sensors for pollutants, drugs, and various water and food samples. Challenges related to nanozymes as electrocatalytic materials are discussed, along with potential solutions and approaches for addressing these shortcomings.

Cu Aerogels with Sustainable Cu(I)/Cu(II) Redox Cycles for Sensitive Nonenzymatic Glucose Sensing

Developing functional nanomaterials for nonenzymatic glucose electrochemical sensing platforms is vital and challenging from the perspective of pathology and physiology. Accurate identification of active sites and thorough investigation of catalytic mechanisms are critical prerequisites for the design of advanced catalysts for electrochemical sensing. Herein, Cu aerogels are synthesized as a model system for sensitive nonenzymatic glucose sensing. The resultant Cu aerogels exhibit good catalytic activity for glucose electrooxidation with high sensitivity and a low detection limit. Significantly, in situ electrochemical investigations and Raman characterizations reveal the catalytic mechanism of Cu-based nonenzymatic glucose sensing. During the electrocatalytic oxidation of glucose, Cu(I) is electrochemically oxidized to generate Cu(II), and the resultant Cu(II) is spontaneously reduced back to Cu(I) by glucose, achieving the sustained Cu(I)/Cu(II) redox cycles. This study provides profound insights into the catalytic mechanism for nonenzymatic glucose sensing, which provides great potential guidance for a rational design of advanced catalysts in the future.

TiO2/MWCNT/Nafion-Modified Glassy Carbon Electrode as a Sensitive Voltammetric Sensor for the Determination of Hydrogen Peroxide

In this work we describe a straightforward approach for creating a nanocomposite comprising multiwalled carbon nanotubes (MWCNTs) and titanium dioxide (TiO2) using the hydrothermal technique, which is then characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectrometer (EDS), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA) to assess its properties. Nafion is employed as a reticular agent for the nanocomposite on the glassy carbon electrode (GCE), creating the MWCNT/TiO2/Nafion/GCE system. The electrochemical behavior of the system was evaluated using cyclic voltammetry, revealing its remarkable electrocatalytic activity for detecting hydrogen peroxide in water. The developed sensor showcased a broad linear response range of 14.00 to 120.00 μM, with a low detection limit of 4.00 μM. This electrochemical sensor provides a simple and highly sensitive method for detecting hydrogen peroxide in aqueous solutions and shows promising potential for various real-world applications, particularly in H2O2 monitoring.

Recent Advances in Electrochemical Sensing of Hydrogen Peroxide (H2O2) Released from Cancer Cells

Cancer is by far the most common cause of death worldwide. There are more than 200 types of cancer known hitherto depending upon the origin and type. Early diagnosis of cancer provides better disease prognosis and the best chance for a cure. This fact prompts world-leading scientists and clinicians to develop techniques for the early detection of cancer. Thus, less morbidity and lower mortality rates are envisioned. The latest advancements in the diagnosis of cancer utilizing nanotechnology have manifested encouraging results. Cancerous cells are well known for their substantial amounts of hydrogen peroxide (H₂O₂). The common methods for the detection of H₂O₂ include colorimetry, titration, chromatography, spectrophotometry, fluorimetry, and chemiluminescence. These methods commonly lack selectivity, sensitivity, and reproducibility and have prolonged analytical time. New biosensors are reported to circumvent these obstacles. The production of detectable amounts of H₂O₂ by cancerous cells has promoted the use of bio- and electrochemical sensors because of their high sensitivity, selectivity, robustness, and miniaturized point-of-care cancer diagnostics. Thus, this review will emphasize the principles, analytical parameters, advantages, and disadvantages of the latest electrochemical biosensors in the detection of H₂O₂. It will provide a summary of the latest technological advancements of biosensors based on potentiometric, impedimetric, amperometric, and voltammetric H₂O₂ detection. Moreover, it will critically describe the classification of biosensors based on the material, nature, conjugation, and carbon-nanocomposite electrodes for rapid and effective detection of H₂O₂, which can be useful in the early detection of cancerous cells.

Efficiency improvement in non-enzymatic H2O2 detection induced by the simultaneous synthesis of Au and Ag nanoparticles in an RGO/Au/Fe3O4/Ag nanocomposite

Developing a quick and precise technique for hydrogen peroxide (H₂O₂) detection would open up a new class of technologies for biological, medical and chemical applications.

A glassy carbon electrode modified with a nanocomposite prepared from Pd/Al layered double hydroxide and carboxymethyl cellulose for voltammetric sensing of hydrogen peroxide

A Pd/Al layered double hydroxide/carboxymethyl cellulose nanocomposite (CMC@Pd/Al-LDH) was fabricated using carboxymethyl cellulose as a green substrate via co-precipitation method. The synthesized nanocomposite was characterized using different methods such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray powder diffraction, transmission electron microscopy, and electrochemical techniques. A glassy carbon electrode (GCE) was then modified with the suspended composite to obtain an electrochemical sensor for hydrogen peroxide (H₂O₂). The voltammetric (cathodic) current of the modified GCE was measured at -380 mV (vs. Ag/AgCl), at the scan rate of 50 mV.s^-1. Results show a linear dynamic range of 1 to 120 μM, and a 0.3 µM limit of detection (at S/N = 3). Intraday and interday relative standard deviations are in the ranges of 4.9-5.4% and 6.8-7.3%, respectively. The sensor was applied for the determination of H₂O₂ in basil extracts, milk, and spiked river water samples. The recoveries are between 96.60 and 102.30%. Graphical abstractA Pd/Al layered double hydroxide/carboxymethyl cellulose nanocomposite (CMC@Pd/Al-LDH) was fabricated via co-precipitation method and was characterized using scanning electron microscopy, Energy-dispersive X-ray spectroscopy, X-ray powder diffraction, transmission electron microscopy and electrochemical techniques. CMC@Pd/Al-LDH was used to fabricate H₂O₂ electrochemical sensor.

A nanocomposite consisting of gold nanobipyramids and multiwalled carbon nanotubes for amperometric nonenzymatic sensing of glucose and hydrogen peroxide

Gold nanobipyramids were synthesized by a seed-mediated growth method and then supported by multi-walled carbon nanotubes (denoted as AuNBP/MWCNTs). The electrocatalytic activity of the AuNBP/MWCNTs on a glassy carbon electrode (GCE) towards direct glucose oxidation and hydrogen peroxide reduction was superior to that of AuNBPs and MWCNTs. The modified GCE, operated at a typical working voltage of +0.15 V (vs. SCE) and in 0.1 M NaOH solution, exhibits a linear response in the 10 μM to 36.7 mM glucose concentration range with a 3.0 μM detection limit (at S/N = 3) and a sensitivity of 101.2 μA mM^-1 cm^-2. It also demonstrates good sensitivity towards hydrogen peroxide in at pH 7 solution at a working potential of -0.50 V (vs. SCE), with a linear response range from 5.0 μM to 47.3 mM, a sensitivity of 170.6 μA mM^-1 cm^-2 and a detection limit of 1.5 μM. Graphical abstract A electrochemical sensing platform based on the use of gold nanobipyramids and multi-walled carbon nanotubes nanocomposites (AuNBP/MWCNTs) is described for the determination of glucose and hydrogen peroxide.

Preparation of Nano Au and Pt Alloy Microspheres Decorated with Reduced Graphene Oxide for Nonenzymatic Hydrogen Peroxide Sensing

The flourish of nanotechnology has brought new vitality to the research and development of electrochemical sensing materials. In this work, we successfully synthesized Nano Au and Pt alloy microspheres decorated with reduced graphene oxide (RGO/nAPAMSs) by a simple, facile, and eco-friendly one-step reduction strategy for the fabrication of highly sensitive nonenzymatic H₂O₂ sensing interfaces. Energy-dispersive X-ray spectroscopy mapping (EDX mapping), energy-dispersive X-ray spectroscopy analysis (EDX), transmission electron microscopy (TEM), Fourier transform infrared spectrum (FT-IR), and X-ray diffraction spectrum (XRD) were employed to characterize RGO/nAPAMSs from a microscopic perspective. The results of cyclic voltammetry and chronoamperometry exhibited excellent electrochemical behaviors toward H₂O₂, with a rapid response time within 5 s, remarkable sensitivity of 1117.0 μA mM^-1 cm^-2, wide linear range of 0.005 to 4.0 mM and lower detection limit of 0.008 μM (S/N = 3), which provide RGO/nAPAMS not only a promising prospect for the quantitative detection of H₂O₂ but also a potential application in other fields of sensors. Moreover, further analysis showed the principles of the superior H₂O₂ sensing performance of RGO/nAPAMSs. This discovery provides a significant contribution to future study in nonenzymatic H₂O₂ sensing based on Nano Pt, Nano Au noble metal electrocatalysts.

Recent advances in graphene-based nanomaterials for fabricating electrochemical hydrogen peroxide sensors

Due to the large specific surface area, extraordinary mechanical flexibility, chemical stability, and superior electrical and thermal conductivities, graphene (G)-based materials have recently opened up an exciting field in the science and technology of two-dimensional (2D) nanomaterials with continuously growing academic and technological impetus. In the past several years, graphene-based materials have been well designed, synthesized, and investigated for sensing applications. In this review, we discuss the synthesis and application of graphene-based 2D nanomaterials for the fabrication of hydrogen peroxide (H₂O₂) electrochemical sensors. In particular, graphene-based nanomaterials as immobilization matrix of heme proteins for the fabrication of enzymatic H₂O₂ electrochemical biosensors is first summarized. Then, the application of graphene-based electrocatalysts (metal-free, noble-metals and non-noble metals) in constructing non-enzymatic H₂O₂ electrochemical sensors is discussed in detail. We hope that this review is helpful to push forward the advancement of this academic issue (189 references).

Decoration of GO with Fe spinel-Naf/DMAP: an electrochemical probe for sensing H2O2 reduction

We herein report the preparation of graphene oxide decorated with Fe spinel (Fe₃O₄)-Naf/DMAP for an unprecedented and highly selective non-enzymatic electrochemical sensing of hydrogen peroxide.

Graphene-based nanoprobes for molecular diagnostics

In recent years, graphene has received widespread attention owing to its extraordinary electrical, chemical, optical, mechanical and structural properties. Lately, considerable interest has been focused on exploring the potential applications of graphene in life sciences, particularly in disease-related molecular diagnostics. In particular, the coupling of functional molecules with graphene as a nanoprobe offers an excellent platform to realize the detection of biomarkers, such as nucleic acids, proteins and other bioactive molecules, with high performance. This article reviews emerging graphene-based nanoprobes in electrical, optical and other assay methods and their application in various strategies of molecular diagnostics. In particular, this review focuses on the construction of graphene-based nanoprobes and their special advantages for the detection of various bioactive molecules. Properties of graphene-based materials and their functionalization are also comprehensively discussed in view of the development of nanoprobes. Finally, future challenges and perspectives of graphene-based nanoprobes are discussed.

Design and preparation of a non-enzymatic hydrogen peroxide sensor based on a novel rigid chain liquid crystalline polymer/reduced graphene oxide composite

A novel non-enzymatic hydrogen peroxide (H₂O₂) sensor was developed using a rigid chain liquid crystalline (LC) polymer with ferrocenyl as the side group and reduced graphene oxide (rGO) composite.

AgAuPt nanocages for highly sensitive detection of hydrogen peroxide

AgAuPt hybrid nanocages modified electrode showed high sensitivity for the detection of hydrogen peroxide.

Hierarchical polystyrene@reduced graphene oxide–Pt core–shell microspheres for non-enzymatic detection of hydrogen peroxide

A non-enzymatic electrochemical sensor based on polystyrene@reduced graphene oxide (RGO)–Pt core–shell microspheres was developed for sensitive detection of hydrogen peroxide (H₂O₂).

Nanocomposite hydrogels based on liquid crystalline brush-like block copolymer–Au nanorods and their application in H2O2 detection

The nanocomposite hydrogel from liquid crystalline brush-like block copolymers and gold nanorods is developed, which is used to develop a simple and reproducible method to detect H₂O₂.