Electrochemical immunosensor for carcinoembryonic antigen based on signal amplification strategy of graphene and Fe3O4/Au NPs

Quenching study of Cu2S-MPA/NGODs composites in electrochemiluminescence detection by modulating resonance energy transfer and adsorption process

This study explores the principles of resonance energy transfer and adsorption modulation using composites of Cu2S-MPA/NGODs. These composites can efficiently control the quenching process of electrochemiluminescence (ECL). Mercaptopropionic acid (MPA) was added during the synthesis of Cu2S-MPA to enhance its attachment to nitrogen-doped graphene quantum dots (NGODs). The UV absorption peaks of NGODs coincided with the emission peaks of luminol ECL, enabling resonance energy transfer and enhancing the quenching capability of Cu2S-MPA. Meanwhile, there is another quenching strategy. When the readily reducible Cu+ ions underwent partial reduction to Cu when they were bound to NGODs. This weakened the electrocatalytic effect on reactive oxygen species (ROS) and had a detrimental impact on electron transfer. Under optimal conditions, the immunosensor ECL intensity decreased linearly with the logarithm of carcinoembryonic antigen (CEA) concentration in the range of 0.00001-40 ng/mL, with a detection limit of 0.269 fg/mL. The sensor was effectively utilized for the identification of CEA in actual serum samples.

Achieving enhanced sensitivity and accuracy in carcinoembryonic antigen (CEA) detection as an indicator of cancer monitoring using thionine/chitosan/graphene oxide nanocomposite-modified electrochemical immunosensor

The current study has focused on electrochemical immunosensing of carcinoembryonic antigen (CEA) employing an immobilized antibody on a thionine, chitosan, or graphene oxide nanocomposite modified glassy carbon electrode (anti-CEA/THi-CS-GO/GCE) as an indicator of cancer monitoring. THi-CS-GO nanocomposites were made using ultrasonication, and analyses of their morphology and crystal structure using SEM, FTIR, and XRD showed that thionine and chitosan molecules were intercalated with stacking interactions with both the top and bottom of GO nanosheets. Electrochemical experiments revealed anti-CEA, THi-CS-GO/GCE to have exceptional sensitivity and selectivity towards CEA compounds. The detection limit value was established to be 0.8 pg/mL when it was discovered that variations in the decrease peak current were directly proportional to the logarithm concentration of CEA over a wide range from 10-3 to 104 ng/mL. Results of testing the immunosensor's application capability for detecting CEA in a sample of human serum show that ELISA and DPV results are very congruent. The produced immunosensor demonstrated adequate immunosensor precision in determining CEA in prepared genuine samples of human serum and clinical applications.

Surface-Defect-Involved and Eye-Visible Electrochemiluminescence of Unary Copper Nanoclusters for Immunoassay

A single-stabilizer-capped strategy is proposed for achieving highly efficient and surface-defect-involved electrochemiluminescence (ECL) from unary copper nanoclusters (NCs) via employing l-cysteine (Cys) as a capping agent of luminophore. The Cys-capped CuNCs (Cys-CuNCs) can be electrochemically injected with valence band (VB) holes and exhibit eye-touchable ECL processes around +0.95 and +1.15 V upon employing TPrA as a coreactant. Both accumulated ECL spectra and spooling ECL spectra demonstrated that the two ECL processes are of the same single waveband and spectrally identical to each other with the same maximum emission wavelength of 640 nm. Promisingly, ECL of the Cys-CuNCs/TPrA system is obviously red-shifted for ∼150 nm to PL of Cys-CuNCs, indicating that the bandgap-engineered routes for ECLs of Cys-CuNCs are completely blocked. The oxidative-reduction ECL process of the Cys-CuNCs/TPrA system is a kind of highly efficient, eye-visible, and single-color emission in surface-defect-involved route. The capping agent of Cys can enable the CuNCs/TPrA system with a stronger ECL than other thiol capping agents, so that Cys-CuNCs are utilized as ECL tags for sensitive and selective immunoassays, which exhibit a wide linear response range from 0.05 pg/mL to 0.5 ng/mL and a limit of detection of 0.01 pg/mL (S/N = 3) with carcinoembryonic antigen as the analyte. Moreover, both the luminophore Cys-CuNCs and conjugates Ab₂-CuNCs can be safely stored in aqueous media without any protector, which is promising for the evolution and clinic application of metal NC ECL in the surface-defect-involved route.

Nanotechnology-based approaches for effective detection of tumor markers: A comprehensive state-of-the-art review

As well-appreciated biomarkers, tumor markers have been spotlighted as reliable tools for predicting the behavior of different tumors and helping clinicians ascertain the type of molecular mechanism of tumorigenesis. The sensitivity and specificity of these markers have made them an object of even broader interest for sensitive detection and staging of various cancers. Enzyme-linked immunosorbent assay (ELISA), fluorescence-based, mass-based, and electrochemical-based detections are current techniques for sensing tumor markers. Although some of these techniques provide good selectivity, certain obstacles, including a low sample concentration or difficulty carrying out the measurement, limit their application. With the advent of nanotechnology, many studies have been carried out to synthesize and employ nanomaterials (NMs) in sensing techniques to determine these tumor markers at low concentrations. The fabrication, sensitivity, design, and multiplexing of sensing techniques have been uplifted due to the attractive features of NMs. Various NMs, such as magnetic and metal nanoparticles, up-conversion NPs, carbon nanotubes (CNTs), carbon-based NMs, quantum dots (QDs), and graphene-based nanosensors, hyperbranched polymers, optical nanosensors, piezoelectric biosensors, paper-based biosensors, microfluidic-based lab-on-chip sensors, and hybrid NMs have proven effective in detecting tumor markers with great sensitivity and selectivity. This review summarizes various categories of NMs for detecting these valuable markers, such as prostate-specific antigen (PSA), human carcinoembryonic antigen (CEA), alpha-fetoprotein (AFP), human chorionic gonadotropin (hCG), human epidermal growth factor receptor-2 (HER2), cancer antigen 125 (CA125), cancer antigen 15-3 (CA15-3, MUC1), and cancer antigen 19-9 (CA19-9), and highlights recent nanotechnology-based advancements in detection of these prognostic biomarkers.

Impedimetric and Plasmonic Sensing of Collagen I Using a Half-Antibody-Supported, Au-Modified, Self-Assembled Monolayer System

This research presents an electrochemical immunosensor for collagen I detection using a self-assembled monolayer (SAM) of gold nanoparticles (AuNPs) and covalently immobilized half-reduced monoclonal antibody as a receptor; this allowed for the validation of the collagen I concentration through two different independent methods: electrochemically by Electrochemical Impedance Spectroscopy (EIS), and optically by Surface Plasmon Resonance (SPR). The high unique advantage of the proposed sensor is based on the performance of the stable covalent immobilization of the AuNPs and enzymatically reduced half-IgG collagen I antibodies, which ensured their appropriate orientation onto the sensor's surface, good stability, and sensitivity properties. The detection of collagen type I was performed in a concentration range from 1 to 5 pg/mL. Moreover, SPR was utilized to confirm the immobilization of the monoclonal half-antibodies and sensing of collagen I versus time. Furthermore, EIS experiments revealed a limit of detection (LOD) of 0.38 pg/mL. The selectivity of the performed immunosensor was confirmed by negligible responses for BSA. The performed approach of the immunosensor is a novel, innovative attempt that enables the detection of collagen I with very high sensitivity in the range of pg/mL, which is significantly lower than the commonly used enzyme-linked immunosorbent assay (ELISA).

An ultrasensitive aptamer-antibody sandwich cortisol sensor for the noninvasive monitoring of stress state

Cortisol is a major glucocorticoid that can affect physiological activities in the human body. Besides, it is also a biomarker that can reflect the stress state of the body. Therefore, in order to monitor stress states in a sensitive and non-invasive manner, an ultra-sensitive aptamer-antibody sandwich sensor modified with multi-walled carbon nanotubes, ordered mesoporous carbon CMK-3, and silver nanoparticles (MWCNTs/CMK-3/AgNPs) was proposed for non-invasive detection of cortisol in human saliva. The MWCNTs/CMK-3/AgNPs nanocomposite was fixed on the surface of the glassy carbon electrodes (GCEs) as the material for the first round of signal amplification, and secondary signal amplification was realized by conjugating cortisol antibodies with gold nanoparticles (AuNPs). Finally, the aptamer-antibody sandwich pattern was used to specifically recognize and bind cortisol. The concentration response range for this aptamer-antibody sandwich sensor is 0.1 pg/mL-10 ng/mL, and the limit of detection (LOD) is 0.09 pg/mL. So far, the LOD of this sensor has been relatively low, showing its good sensitivity, selectivity, stability, and reproducibility. Furthermore, it has been successfully applied to detect cortisol in saliva samples to compare the stress states of postgraduates and undergraduates.

A novel SWCNT-amplified "signal-on" electrochemical aptasensor for the determination of trace level of bisphenol A in human serum and lake water

A novel "signal-on" electrochemical aptasensor was developed for ultrasensitive and specific detection of BPA, using single-walled carbon nanotubes (SWCNT) as the electro-catalytic probe for further signal amplification. The multi-walled carbon nanotubes (MWCNT), amino-functionalized magnetite, and gold nanoparticles (NH₂-Fe₃O₄/Au NPs) were applied first to modify the glassy carbon electrode (GCE) surface and to form a nanomaterial film with satisfactory conductive properties, stability, and biocompatibility. The BPA aptamer was then loaded onto the sensing platform by hybridization with complementary DNA (CDNA). In the presence of BPA it combines with the aptamer and the BPA-aptamer conjugate was released from the electrode;subsequently the added SWCNT and CDNA assembled quickly. Thus, the dual-amplification of the "signal-on" electrochemical aptasensor takes effect. The [Fe (CN)₆]^3-/4- redox probe signal (∆I) detected by DPV (differential pulse voltammetry) is proportional to the negative logarithm of BPA concentration between 10^-19 M and 10^-14 M. The detection limit is 0.08 aM. Importantly, the proposed biosensor represents a successful application for determination of BPA in human serum and lake water. Schematic representation of SWCNT-amplified "signal-on" electrochemical aptasensor for the detection of trace level of bisphenol A in human serum and lake water.

Nanobioconjugates for Signal Amplification in Electrochemical Biosensing

Nanobioconjugates are hybrid materials that result from the coalescence of biomolecules and nanomaterials. They have emerged as a strategy to amplify the signal response in the biosensor field with the potential to enhance the sensitivity and detection limits of analytical assays. This critical review collects a myriad of strategies for the development of nanobioconjugates based on the conjugation of proteins, antibodies, carbohydrates, and DNA/RNA with noble metals, quantum dots, carbon- and magnetic-based nanomaterials, polymers, and complexes. It first discusses nanobioconjugates assembly and characterization to focus on the strategies to amplify a biorecognition event in biosensing, including molecular-, enzymatic-, and electroactive complex-based approaches. It provides some examples, current challenges, and future perspectives of nanobioconjugates for the amplification of signals in electrochemical biosensing.

Progress in cancer biomarkers monitoring strategies using graphene modified support materials

Cancer is the one of the fatal and dreaded disease responsible for huge number of morbidity and mortality across the globe. It is expected that the global burden will increase to 21.7 million fresh cancer cases as compared to present estimate of 18.1 million cancer cases in addition to nearly 9.6 million cancer deaths worldwide. In response to cancerous or certain benign conditions; specific type of tumor or cancer markers (biomarkers) are produced at much higher levels which are secreted into the urine, blood, stool, tumor or other tissues. Therefore, the efficient and early detection of cancer biomarkers is necessary which can offer a reliable way for cancer patient screening and diagnosis. This process not only helps in the evaluation of pathogenic processes but also the prognosis of different cancers and pharmacological responses to therapeutic interventions are secured. Over the past several years, electrochemical detection methods have proved to be the most attractive methods among many, due to the advantages, such as simple instrumentation, portability, low cost and high sensitivity. Furthermore, the modifications of these electrochemical immunosensors by utilizing various types of nanomaterials enable these systems to detect trace amount of target tumor markers. Hence, herein, we intend to review the selective works on electrochemical detection of various biomarkers using wide range of nanomaterials with a particular focus on graphene.

Microstructure evolution of sandwich graphite oxide/interlayer-embedded Au nanoparticles induced from γ-rays for carcinoembryonic antigen biosensor

With the capability of inducing small particle sizes of supported metal in graphite oxide (GO), the γ-ray irradiation method applied for preparing graphite oxide-gold (GO-Au) nanocomposites as electrochemical immunosensors has attracted specific attention recently. To study the accurate factors influencing the precise morphology and final performance of the prepared composites in the γ-irradiation system, we proposed a facile method to investigate the evolution of the GO structure, size and dispersion of Au nanoparticles (AuNPs) produced with the addition of isopropyl alcohol to the system. The GO-Au nanocomposites were characterized by Fourier transform infrared spectroscopy, x-ray diffraction spectra, Raman spectra, x-ray photoelectron spectroscopy and high resolution transmission electron microscopy. These nanocomposites with sandwich morphology exhibited an excellent immunosensor performance with a low detection limit of 15.8 pg ml^-1 (S/N = 3) and a wide linear range from 1 to 40 ng ml^-1 for detecting carcinoembryonic antigens. The enhanced biosensing performance is attributed to the synergistic effect of γ-irradiation and the precise structure of GO, which endows the smaller size and more uniform distribution of AuNPs on the GO as well as the good signal amplification capability. Furthermore, adopting the γ-irradiation method and use of GO as a precursor is propitious for application in large-scale production because of its high-efficiency and high-yielding characteristics.

Amperometric aptasensor for carcinoembryonic antigen based on the use of bifunctionalized Janus nanoparticles as biorecognition-signaling element

We report herein the design of a novel biosensing strategy for the detection of carcinoembryonic antigen (CEA), based on the use of Janus-type nanoparticles having Au and silica opposite faces as integrated electrochemical biorecognition-signaling system. The Janus nanoparticles were properly functionalized with horseradish peroxidase on the silica surface to act as signaling element, and a biotin thiol-modified anti-CEA DNA hairpin aptamer the Au face to assemble the biorecognition element. The sensing approach relies on the first specific recognition of CEA by the bifunctionalized Janus nanoparticles, causing unfolding of the DNA hairpin structure and unmasking the biotin residues at the aptamer chain. This CEA-Janus nanoparticle complex was then captured by avidin-modified Fe₃O₄@SiO₂ NanoCaptors^®, allowing further magnetic deposition on carbon screen printed electrodes for the amperometric detection of the cancer biomarker. The Janus nanoparticles-based aptasensor was able to detect CEA in the range from 1 to 5000 ng mL^-1 (5.5 pM-28 nM) with a detection limit of 210 pg mL^-1 (1.2 pM). The aptasensor also showed high reproducibility and storage stability, and was successfully validated in human serum.

Electrospun γ-Fe2O3 nanofibers as bioelectrochemical sensors for simultaneous determination of small biomolecules

Nanofibers of α-Fe₂O₃ and γ-Fe₂O₃ have been obtained after the controlled calcination of precursor nanofibers synthesized by electrospinning. α-Fe₂O₃ nanofibers showed an irregular toruloid structure due to the decomposition of poly (4-vinyl) pyridine in air while γ-Fe₂O₃ nanoparticles decorated nanofibers were observed after the calcination under N₂ atmosphere. Electrochemical measurements showed that different electrochemical behaviors were observed on the glassy carbon electrodes modified by α-Fe₂O₃ and γ-Fe₂O₃ nanofibers. The electrode modified by γ-Fe₂O₃ nanofibers exhibited high electrocatalytic activities toward oxidation of dopamine, uric acid and ascorbic acid while α-Fe₂O₃ nanofibers cannot. Furthermore, the γ-Fe₂O₃ modified electrode can realize the selective detection of biomolecules in ternary electrolyte solutions. The synthesis of nanofibers of α-Fe₂O₃ and γ-Fe₂O₃ and their electrochemical sensing properties relationship have been discussed and analyzed based on the experimental results.

Development of an Fe3O4@Cu silicate based sensing platform for the electrochemical sensing of dopamine

Abnormal levels of dopamine (DA) in body fluids is an indication of serious health issues, hence development of highly sensitive platforms for the precise detection of DA is highly essential. Herein, we demonstrate an Fe₃O₄@Cu silicate based electrochemical sensing platform for the detection of DA. Morphology and BET analysis shows the formation of ∼320 nm sized sea urchin-like Fe₃O₄@Cu silicate core–shell nanostructures with a 174.5 m² g⁻¹ surface area. Compared to Fe₃O₄ and Fe₃O₄@SiO₂, the Fe₃O₄@Cu silicate urchins delivered enhanced performance towards the electrochemical sensing of DA in neutral pH. The Fe₃O₄@Cu silicate sensor has a 1.37 μA μM⁻¹ cm⁻² sensitivity, 100–700 μM linear range and 3.2 μM limit of detection (LOD). In addition, the proposed Fe₃O₄@Cu silicate DA sensor also has good stability, selectivity, reproducibility and repeatability. The presence of Cu in Fe₃O₄@Cu silicate and the negatively charged surface of the Cu silicate shell play a vital role in achieving high selectivity and sensitivity during DA sensing. The current investigation not only represents the development of a highly selective DA sensor but also directs towards the possibility for the fabrication of other Cu silicate based core–shell nanostructures for the precise detection of DA.

Abnormal levels of dopamine (DA) in body fluids is an indication of serious health issues, hence development of highly sensitive platforms for the precise detection of DA is highly essential.

Iron-Based Nanomaterials/Graphene Composites for Advanced Electrochemical Sensors

Iron oxide nanostructures (IONs) in combination with graphene or its derivatives-e.g., graphene oxide and reduced graphene oxide-hold great promise toward engineering of efficient nanocomposites for enhancing the performance of advanced devices in many applicative fields. Due to the peculiar electrical and electrocatalytic properties displayed by composite structures in nanoscale dimensions, increasing efforts have been directed in recent years toward tailoring the properties of IONs-graphene based nanocomposites for developing more efficient electrochemical sensors. In the present feature paper, we first reviewed the various routes for synthesizing IONs-graphene nanostructures, highlighting advantages, disadvantages and the key synthesis parameters for each method. Then, a comprehensive discussion is presented in the case of application of IONs-graphene based composites in electrochemical sensors for the determination of various kinds of (bio)chemical substances.

An ultrasensitive enzyme-free electrochemical immunosensor based on redox cycling amplification using methylene blue

We report a new enzyme-free electrochemical sensor for ultrasensitive measurements of protein biomarkers in plasma and whole blood samples based on a unique electrochemical-chemical-chemical (ECC) redox cycling signal amplification scheme. This scheme uses methylene blue (MB) as a redox indicator which undergoes an endergonic reaction with Ru(NH3)63+ and a highly exergonic reaction with tris(2-carboxyethyl)phosphine (TCEP). This approach offers improved detection sensitivity and sensor stability compared with enzyme-based ECC redox cycling techniques, while involving a simpler sensor modification process and detection protocol. This redox cycling scheme was combined with a robust immunosandwich assay for quantitative measurements of protein biomarkers. For proof of principle, Plasmodium falciparum histidine-rich protein 2 (PfHRP2) was measured in human plasma and whole blood samples, which could be detected down to 10 fg mL-1 and 18 fg mL-1, respectively. Furthermore, this immunosensor exhibits high selectivity, excellent reproducibility and good stability for up to 2 weeks, making it a promising platform for point-of-care testing, especially for detecting extremely low biomarker concentrations in raw biofluids.

Non-Invasive Breast Cancer Diagnosis through Electrochemical Biosensing at Different Molecular Levels

The rapid and accurate determination of specific circulating biomarkers at different molecular levels with non- or minimally invasive methods constitutes a major challenge to improve the breast cancer outcomes and life quality of patients. In this field, electrochemical biosensors have demonstrated to be promising alternatives against more complex conventional strategies to perform fast, accurate and on-site determination of circulating biomarkers at low concentrations in minimally treated body fluids. In this article, after discussing briefly the relevance and current challenges associated with the determination of breast cancer circulating biomarkers, an updated overview of the electrochemical affinity biosensing strategies emerged in the last 5 years for this purpose is provided highlighting the great potentiality of these methodologies. After critically discussing the most interesting features of the electrochemical strategies reported so far for the single or multiplexed determination of such biomarkers with demonstrated applicability in liquid biopsy analysis, existing challenges still to be addressed and future directions in this field will be pointed out.

Graphene- gold based nanocomposites applications in cancer diseases; Efficient detection and therapeutic tools

Early detection and efficient treatment of cancer disease remains a drastic challenge in 21st century. Throughout the bulk of funds, studies, and current therapeutics, cancer seems to aggressively advance with drug resistance strains and recurrence rates. Nevertheless, nanotechnologies have indeed given hope to be the next generation for oncology applications. According to US National cancer institute, it is anticipated to revolutionize the perspectives of cancer diagnosis and therapy. With such success, nano-hybrid strategy creates a marvelous preference. Herein, graphene-gold based composites are being increasingly studied in the field of oncology, for their outstanding performance as robust vehicle of therapeutic agents, built-in optical diagnostic features, and functionality as theranostic system. Additional modes of treatments are also applicable including photothermal, photodynamic, as well as combined therapy. This review aims to demonstrate the various cancer-related applications of graphene-gold based hybrids in terms of detection and therapy, highlighting the major attributes that led to designate such system as a promising ally in the war against cancer.

Recent Advances in Electrochemical Immunosensors

Immunosensors have experienced a very significant growth in recent years, driven by the need for fast, sensitive, portable and easy-to-use devices to detect biomarkers for clinical diagnosis or to monitor organic pollutants in natural or industrial environments. Advances in the field of signal amplification using enzymatic reactions, nanomaterials such as carbon nanotubes, graphene and graphene derivatives, metallic nanoparticles (gold, silver, various oxides or metal complexes), or magnetic beads show how it is possible to improve collection, binding or transduction performances and reach the requirements for realistic clinical diagnostic or environmental control. This review presents these most recent advances; it focuses first on classical electrode substrates, then moves to carbon-based nanostructured ones including carbon nanotubes, graphene and other carbon materials, metal or metal-oxide nanoparticles, magnetic nanoparticles, dendrimers and, to finish, explore the use of ionic liquids. Analytical performances are systematically covered and compared, depending on the detection principle, but also from a chronological perspective, from 2012 to 2016 and early 2017.

Core-Shell Nanoparticle-Enhanced Raman Spectroscopy

Core-shell nanoparticles are at the leading edge of the hot research topics and offer a wide range of applications in optics, biomedicine, environmental science, materials, catalysis, energy, and so forth, due to their excellent properties such as versatility, tunability, and stability. They have attracted enormous interest attributed to their dramatically tunable physicochemical features. Plasmonic core-shell nanomaterials are extensively used in surface-enhanced vibrational spectroscopies, in particular, surface-enhanced Raman spectroscopy (SERS), due to the unique localized surface plasmon resonance (LSPR) property. This review provides a comprehensive overview of core-shell nanoparticles in the context of fundamental and application aspects of SERS and discusses numerous classes of core-shell nanoparticles with their unique strategies and functions. Further, herein we also introduce the concept of shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) in detail because it overcomes the long-standing limitations of material and morphology generality encountered in traditional SERS. We then explain the SERS-enhancement mechanism with core-shell nanoparticles, as well as three generations of SERS hotspots for surface analysis of materials. To provide a clear view for readers, we summarize various approaches for the synthesis of core-shell nanoparticles and their applications in SERS, such as electrochemistry, bioanalysis, food safety, environmental safety, cultural heritage, materials, catalysis, and energy storage and conversion. Finally, we exemplify about the future developments in new core-shell nanomaterials with different functionalities for SERS and other surface-enhanced spectroscopies.

Electrochemical switching with a DNA aptamer-based electrochemical sensor

The present study was focused on the application of NH₂-functionalized Fe₃O₄/gold nanoparticles (Fe₃O₄/AuNPs)-decorated carbon nanotubes (CNTs) in the development of electrochemical sensor for bisphenol A (BPA) detection. After the nanocomposite synthesis and its characterization, the optimization of the measurement conditions and working parameters of sensors were evaluated. Aminated detection probe (DNA aptamer) was surface confined on the NH₂-functionalized Fe₃O₄/AuNPs surface using glutaraldehyde as a linker. The constructed nanoaptasensor incorporated the advantages of the neatly deposited Fe₃O₄/AuNPs and the covalent attachment of the detection probe at the surface of sensing interface. The results revealed that BPA could be detected in a wide linear range from 1 to 600nM with a low detection limit down to 300pM. Moreover, the resultant aptasensor exhibited good specificity, stability and reproducibility, indicating that the present strategy was promising for broad potential application in clinic assay.

Ultrasensitive Label-free Electrochemical Immunosensor based on Multifunctionalized Graphene Nanocomposites for the Detection of Alpha Fetoprotein

In this work, a novel label-free electrochemical immunosensor was developed for the quantitative detection of alpha fetoprotein (AFP). Multifunctionalized graphene nanocomposites (TB-Au-Fe₃O₄-rGO) were applied to modify the electrode to achieve the amplification of electrochemical signal. TB-Au-Fe₃O₄-rGO includes the advantages of graphene, ferroferric oxide nanoparticles (Fe₃O₄ NPs), gold nanoparticles (Au NPs) and toluidine blue (TB). As a kind of redox probe, TB can produce the electrochemical signal. Graphene owns large specific surface area, high electrical conductivity and good adsorption property to load a large number of TB. Fe₃O₄ NPs have good electrocatalytic performance towards the redox of TB. Au NPs have good biocompatibility to capture the antibodies. Due to the good electrochemical performance of TB-Au-Fe₃O₄-rGO, the effective and sensitive detection of AFP was achieved by the designed electrochemical immunosensor. Under optimal conditions, the designed immunosensor exhibited a wide linear range from 1.0 × 10⁻⁵ ng/mL to 10.0 ng/mL with a low detection limit of 2.7 fg/mL for AFP. It also displayed good electrochemical performance including good reproducibility, selectivity and stability, which would provide potential applications in the clinical diagnosis of other tumor markers.

Recent developments in the synthesis, properties, and biomedical applications of core/shell superparamagnetic iron oxide nanoparticles with gold

In the last decade, Gold (Au) coated superparamagnetic iron oxide nanoparticles (SPIONs), have immensely promoted the advancement of diagnostics and theranostics in the biomedical field.