Fabrication of one dimensional CNTs/Fe3O4@PPy/Pd magnetic composites for the accumulation and electrochemical detection of triclosan

Efficient Synthesis of Fe3O4/PPy Double-Carbonized Core-Shell-like Composites for Broadband Electromagnetic Wave Absorption

Ever-increasing electromagnetic pollution largely affects human health, sensitive electronic equipment, and even military security, but current strategies used for developing functional attenuation materials cannot be achieved in a facile and cost-effective way. Here, a unique core-shell-like composite was successfully synthesized by a simple chemical approach and a rapid microwave-assisted carbonization process. The obtained composites show exceptional electromagnetic wave absorption (EMWA) properties, including a wide effective absorption band (EAB) of 4.64 GHz and a minimum reflection loss (RLmin) of -26 dB at 1.6 mm. The excellent performance can be attributed to the synergistic effects of conductive loss, dielectric loss, magnetic loss, and multiple reflection loss within the graphene-based core-shell-like composite. This work demonstrates a convenient, rapid, eco-friendly, and cost-effective method for synthesizing high-performance microwave absorption materials (MAMs).

Copper-zinc nanoparticle-decorated nitrogen-doped carbon composite for electrochemical determination of triclosan

A new sensor based on copper-zinc bimetal embedded and nitrogen-doped carbon-based composites (CuZn@NC) was prepared for triclosan (TCS) detection by pyrolyzing the precursor of Cu-Zn binuclear metal-organic framework (MOF). The performance for detecting TCS was evaluated using linear scanning voltammetry (LSV) and differential pulse voltammetry (DPV), and the proton and electron numbers during TCS oxidation have been proved to be one-to-one. The results indicated that CuZn@NC can present a satisfactory analysis performance for TCS detection. Under the optimized conditions, the linear response range was 0.2-600 µM and the detection limit was 47.9 nM. The sensor presented good stability (signal current dropped only 2.5% after 21 days) and good anti-interference of inorganic salts and small molecular organic acids. The good recovery (97.5-104.1%) for detecting spiked TCS in commercial products (toothpaste and hand sanitizer) suggested its potential for routine determination of TCS in real samples.

Development of MWCNT/Magnetite Flexible Triboelectric Sensors by Magnetic Patterning

The fabrication of low-electrical-percolation-threshold polymer composites aims to reduce the weight fraction of the conductive nanomaterial necessary to achieve a given level of electrical resistivity of the composite. The present work aimed at preparing composites based on multiwalled carbon nanotubes (MWCNTs) and magnetite particles in a polyurethane (PU) matrix to study the effect on the electrical resistance of electrodes produced under magnetic fields. Composites with 1 wt.% of MWCNT, 1 wt.% of magnetite and combinations of both were prepared and analysed. The hybrid composites combined MWCNTs and magnetite at the weight ratios of 1:1; 1:1/6; 1:1/12; and 1:1/24. The results showed that MWCNTs were responsible for the electrical conductivity of the composites since the composites with 1 wt.% magnetite were non-conductive. Combining magnetite particles with MWCNTs reduces the electrical resistance of the composite. SQUID analysis showed that MWCNTs simultaneously exhibit ferromagnetism and diamagnetism, ferromagnetism being dominant at lower magnetic fields and diamagnetism being dominant at higher fields. Conversely, magnetite particles present a ferromagnetic response much stronger than MWCNTs. Finally, optical microscopy (OM) and X-ray micro computed tomography (micro CT) identified the interaction between particles and their location inside the composite. In conclusion, the combination of magnetite and MWCNTs in a polymer composite allows for the control of the location of these particles using an external magnetic field, decreasing the electrical resistance of the electrodes produced. By adding 1 wt.% of magnetite to 1 wt.% of MWCNT (1:1), the electric resistance of the composites decreased from 9 × 10⁴ to 5 × 10³ Ω. This approach significantly improved the reproducibility of the electrode's fabrication process, enabling the development of a triboelectric sensor using a polyurethane (PU) composite and silicone rubber (SR). Finally, the method's bearing was demonstrated by developing an automated robotic soft grip with tendon-driven actuation controlled by the triboelectric sensor. The results indicate that magnetic patterning is a versatile and low-cost approach to manufacturing sensors for soft robotics.

Fabrication of a bi-metallic metal organic framework nanocomposite for selective and sensitive detection of triclosan

Transition metal-ion based nanocomposites are widely used owing to their ease of synthesis and cost-effectiveness in the sensor development. In this study, we have synthesized bi-metallic (iron and zinc) metal organic framework (MOF) nanorods-nanoparticles (denoted as Fe₂Zn-MIL-88B) with a well-defined structure and characterized them. The bimetallic material nanocomposite (Fe₂Zn-MIL-88B, nafion (Nf), and multiwalled carbon nanotube (MWCNT)) was fabricated on the electrode (glassy carbon electrode (GCE) or screen printed carbon electrode (SPCE)) surface within 10 min at room temperature. The Fe₂Zn-MIL-88B/Nf/MWCNT@GCE showed an excellent electron transfer mechanism compared to a bare GCE and bare SPCE. The Fe₂Zn-MIL-88B based nanocomposite electrode triggers the oxidation of the environmental carcinogenic molecule triclosan (TCS). Under optimized conditions, the sensor has a limit of detection of 0.31 nM and high selectivity to TCS in the presence of other interfering agents. The sensor has a good day-to-day TCS detection reproducibility. Fe₂Zn-MIL-88B was stable even after 11 months of synthesis and detected TCS with similar sensitivity. The fabrication of the Fe₂Zn-MIL-88B/Nf/MWCNT nanocomposite was successfully translated from the GCE to SPCE. TCS was detected in human plasma and commercial products such as soaps, skin care products, shampoos, and tooth pastes.

Triclosan and related compounds in the environment: Recent updates on sources, fates, distribution, analytical extraction, analysis, and removal techniques

Triclosan (TCS) has been widely used in daily life because of its broad-spectrum antibacterial activities. The residue of TCS and related compounds in the environment is one of the critical environmental safety problems, and the pandemic of COVID-19 aggravates the accumulation of TCS and related compounds in the environment. Therefore, detecting TCS and related compound residues in the environment is of great significance to human health and environmental safety. The distribution of TCS and related compounds are slightly different worldwide, and the removal methods also have advantages and disadvantages. This paper summarized the research progress on the source, distribution, degradation, analytical extraction, detection, and removal techniques of TCS and related compounds in different environmental samples. The commonly used analytical extraction methods for TCS and related compounds include solid-phase extraction, liquid-liquid extraction, solid-phase microextraction, liquid-phase microextraction, and so on. The determination methods include liquid chromatography coupled with different detectors, gas chromatography and related methods, sensors, electrochemical method, capillary electrophoresis. The removal techniques in various environmental samples mainly include biodegradation, advanced oxidation, and adsorption methods. Besides, both the pros and cons of different techniques have been compared and summarized, and the development and prospect of each technique have been given.

The environmentally friendly approaches based on the heterojunction interface of the LaFeO3/Fe2O3@g-C3N4 composite for the disposable and laboratory sensing of triclosan

Triclosan (TCS) is a polychlorinated phenoxy phenol (PCPPs) used as a disinfectant and a broad-spectrum antibacterial and antifungal agent in personal hygiene products. TCS easily forms diphenyl ethers and dioxins, which are persistent organic pollutants. This work used a double approach for the TSC sensing: a) screen-printed (SPE) electrochemical platform for on-site application, modified with lanthanum iron oxide and graphitic carbon nitride composite (LaFeO₃/Fe₂O₃@g-C₃N₄/SPE); and b) carbon paste electrode (CPE), modified with the same material and used in laboratory conditions. Linear range from 0.1 μM to 10 μM, the limit of detection (LOD) of 29 nM and the limit of quantification (LOQ) of 91 nM were obtained for CP electrode in BRBS pH 8. SPE showed the best analytical parameters in BRBS at pH 3, with a linear range from 0.3 μM to 7 μM, LOD of 0.09 μM and LOQ of 0.28 μM. Furthermore, the influence of potential interferents was investigated and proven to be negligible. Determination of TSC was performed to estimate the environmental impact of this compound as well as the practical usefulness of the proposed sensor in the real sample analysis, confirmed with a HPLC analysis.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

An Overview on Recent Progress of Metal Oxide/Graphene/CNTs-Based Nanobiosensors

Nanobiosensors are convenient, practical, and sensitive analyzers that detect chemical and biological agents and convert the results into meaningful data between a biologically active molecule and a recognition element immobilized on the surface of the signal transducer by a physicochemical detector. Due to their fast, accurate and reliable operating characteristics, nanobiosensors are widely used in clinical and nonclinical applications, bedside testing, medical textile industry, environmental monitoring, food safety, etc. They play an important role in such critical applications. Therefore, the design of the biosensing interface is essential in determining the performance of the nanobiosensor. The unique chemical and physical properties of nanomaterials have paved the way for new and improved sensing devices in biosensors. The growing demand for devices with improved sensing and selectivity capability, short response time, lower limit of detection, and low cost causes novel investigations on nanobiomaterials to be used as biosensor scaffolds. Among all other nanomaterials, studies on developing nanobiosensors based on metal oxide nanostructures, graphene and its derivatives, carbon nanotubes, and the widespread use of these nanomaterials as a hybrid structure have recently attracted attention. Nanohybrid structures created by combining these nanostructures will directly meet the future biosensors' needs with their high electrocatalytic activities. This review addressed the recent developments on these nanomaterials and their derivatives, and their use as biosensor scaffolds. We reviewed these popular nanomaterials by evaluating them with comparative studies, tables, and charts.

Biosensing platform on ferrite magnetic nanoparticles: Synthesis, functionalization, mechanism and applications

Ferrite magnetic nanoparticles (FMNPs) are gaining popularity to design biosensors for high-performance clinical diagnosis. The fusion of information shows that FMNPs based biosensors require well-tuned FMNPs as detection probes to produce large and specific biological signals with minimal non-specific binding. Nevertheless, there is a noticeable lacuna of information to solve the issues related to suitable synthesis route, particle size reduction, functionalization, sensitivity towards targeted intercellular biological tiny particles, and lower signal-to-noise ratio. Therefore it allows exploring unique characteristics of FMNPs to design a suitable sensing device for intracellular measurements and diseases detection. This review focuses on the extensively used synthesis routes, their advantages and limitations, crystalline structure, functionalization, along with recent applications of FMNPs in biosensors, taking into consideration their analytical figures of merit and range of linearity. This work also addresses the current progress, key factors for sensitivity, selectivity and productivity improvement along with the challenges, future trends and perspectives of FMNPs based biosensors.

Development of nano-immunosensor with magnetic separation and electrical detection of Escherichia coli using antibody conjugated Fe3O4@Ppy

Detection of bacterial pathogens is the need of the hour due to the increase in antibiotic resistance and the infusion of multi-drug-resistant parasites. The conventional strategies such as ELISA, PCR, and MNP based tests for the detection are efficient but they are cost, time, lab, and manpower intensive. Thus, warranting a simple and effective technique for rapid detection of bacterial pathogens. Magnetic nanoparticles (NPs) have proved to be better alternatives for separation of bacterial pathogens from a variety of sample sources. However, the use of magnetic NPs has not been successful in the detection of these parasites. The current work involves the coating of magnetic NPs (Fe₃O₄) with a conducting polymer (polypyrrole; Ppy) to facilitate simultaneous separation and detection. Electrical (conductivity) measurement was the mode of choice due to the sensitivity, accuracy, and ease it offers. To enhance the conductivity, carboxylic groups were expressed on the Fe₃O₄@Ppy complex and to ensure specificity, E. coli specific antibodies were conjugated. The resulting complex at various process parameters was characterized using FTIR, VSM, and SEM. SEM images were recorded to ensure bacterial separation at optimal process parameters. The impedance analysis and conductivity measurements were carried out for the sample volume of 15 μl. The bacterial suspension from 10¹-10⁶ CFU ml^-1 was successfully detected with a limit of detection of 10 CFU ml^-1 within 10 min using a simplistic detection method.

Magnetic nanoparticles in developing electrochemical sensors for pharmaceutical and biomedical applications

A revolutionary impact on the pharmaceutical and biomedical applications has been arisen in the few years to come as a result of the advances made in magnetic nanoparticles (MNPs) research. The use of MNPs opens wide opportunities in diagnostics, drug and gene delivery, in vivo imaging, magnetic separation, and hyperthermia therapy, etc. Besides, their possible integration in sensors makes them an ideal essential element of innovative pharmaceutical and biomedical applications. Nowadays, MNPs-based electrochemical sensors have attracted great attention to pharmaceutical and biomedical applications owing to their high sensitivity, stability. Selectivity towards the target as well as their simplicity of manufacture. Therefore, this review focus on recent advances with cutting-edge approaches dealing with the synthesis, design, and advantageous analytical performance of MNPs in the electrochemical sensors utilized for pharmaceutical and biomedical applications between 2015 and 2020. The challenges existing in this research area and some potential strategies/future perspectives for the rational design of electrochemical sensors are also outlined.

Nanomaterial-based electrochemical sensors and biosensors for the detection of pharmaceutical compounds

The surging growth of the pharmaceutical industry is a result of the rapidly increasing human population, which has inevitably led to new biomedical and environmental issues. Aside from the quality control of pharmaceutical production and drug delivery, there is an urgent need for precise, sensitive, portable, and cost-effective technologies to track patient overdosing and to monitor ambient water sources and wastewater for pharmaceutical pollutants. The development of advanced nanomaterial-based electrochemical sensors and biosensors for the detection of pharmaceutical compounds has garnered immense attention due to their advantages, such as high sensitivity and selectivity, real-time monitoring, and ease of use. This review article surveys state-of-the-art nanomaterials-based electrochemical sensors and biosensors for the detection and quantification of six classes of significant pharmaceutical compounds, including anti-inflammatory, anti-depressant, anti-bacterial, anti-viral, anti-fungal, and anti-cancer drugs. Important factors such as sensor/analyte interactions, design rationale, fabrication, characterization, sensitivity, and selectivity are discussed. Strategies for the development of high-performance electrochemical sensors and biosensors tailored toward specific pharmaceuticals are highlighted to provide readers and scientists with an extensive toolbox for the detection of a wide range of pharmaceuticals. Our aims are two-fold: (i) to inspire readers by further elucidating the properties and functionalities of existing nanomaterials for the detection of pharmaceuticals; and (ii) to provide examples of the potential opportunities that these devices have for the advanced sensing of pharmaceutical compounds toward safeguarding human health and ecosystems on a global scale.

Polyelectrolyte Based Sensors as Key to Achieve Quantitative Electronic Tongues: Detection of Triclosan on Aqueous Environmental Matrices

Triclosan (TCS) is a bacteriostatic used in household items that promotes antimicrobial resistance and endocrine disruption effects both to humans and biota, raising health concerns. In this sense, new devices for its continuous monitoring in complex matrices are needed. In this work, sensors, based on polyelectrolyte layer-by-layer (LbL) films prepared onto gold interdigitated electrodes (IDE), were studied. An electronic tongue array, composed of (polyethyleneimine (PEI)/polysodium 4-styrenesulfonate (PSS))₅ and (poly(allylamine hydrochloride/graphene oxide)₅ LbL films together with gold IDE without coating were used to detect TCS concentrations (10⁻¹⁵–10⁻⁵ M). Electrical impedance spectroscopy was used as means of transduction and the obtained data was analyzed by principal component analysis (PCA). The electronic tongue was tested in deionized water, mineral water and wastewater matrices showing its ability to (1) distinguish between TCS doped and non-doped solutions and (2) sort out the TCS range of concentrations. Regarding film stability, strong polyelectrolytes, as (PEI/PSS)_n, presented more firmness and no significant desorption when immersed in wastewater. Finally, the PCA data of gold IDE and (PEI/PSS)₅ sensors, for the mineral water and wastewater matrices, respectively, showed the ability to distinguish both matrices. A sensitivity value of 0.19 ± 0.02 per decade to TCS concentration and a resolution of 0.13 pM were found through the PCA second principal component.

Electrode modified with graphene quantum dots supported in chitosan for electrochemical methods and non-linear deconvolution of spectra for spectrometric methods: approaches for simultaneous determination of triclosan and methylparaben

Two analytical methods were developed using electrochemical and spectrometric techniques for the simultaneous determination of endocrine disruptors triclosan and methylparaben in the monitoring of personal care products. For the electroanalytical analyses, a sensitive electrode based on graphene quantum dots supported in chitosan was employed. Under optimized conditions and a working potential of typically + 0.60 V for triclosan and + 0.81 V (vs. Ag/AgCl) for methylparaben, the calibration plots obtained by differential pulse voltammetry were linear in the range 0.10 to 10.0 μmol L^-1. The detection limits were 0.03 and 0.04 μmol L^-1 for triclosan and methylparaben, respectively. For the spectrometric method, UV/VIS spectrometry was used with a mathematical processing of non-linear deconvolution. This processing was used to solve the problem of overlapping absorption bands of triclosan (282 nm) and methylparaben (257 nm), which enabled simultaneous determination. The calibration plots by UV/VIS spectrometry were linear in the range 1.0 to 14.0 μmol L^-1 with detection limits of 0.42 and 0.37 μmol L^-1, respectively, for triclosan and methylparaben. Similar results obtained from the calibration plots of individual analytes suggest that the methods can be applied for individual or simultaneous determination of these species. Both methods were employed in the analysis of five samples of personal care products: toothpaste, antiseptic soap, antiseptic deodorant, shampoo, and a bath kit (soap and shampoo). The statistical tests indicated that there were no significant differences regarding the accuracy and precision of the data provided by the two methods described herein. Graphical abstract Schematic representation for simultaneous determination of triclosan and methylparaben: electrochemical method employing an electrode modified with graphene quantum dots supported in chitosan and spectrometric method applying a non-linear deconvolution of spectrum.

An Immunoaffinity Purification Method for the Simultaneous Analysis of Triclocarban and Triclosan in Foodstuffs by Liquid Chromatography Tandem Mass Spectrometry

Triclocarban (TCC) and triclosan (TCS) have been simultaneously detected in five kinds of foodstuffs using an immunoaffinity purification method coupled with ultrahigh-performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) for the first time. Two highly specific monoclonal antibodies against TCC and TCS were produced and coupled to N-hydroxysuccinimide-activated Sepharose 6B gel to prepare the immunosorbent. Under the optimal conditions, mean recoveries from spiked samples by the IAC-UHPLC-MS/MS method were 70.1-92.8% for TCC and 76.6-102.5% for TCS. Intraday relative standard deviations were below 14.5%. The limits of quantification (LOQs) of TCC were 1 ng/L for beverage samples and 0.01-0.02 μg/kg for food samples. The LOQs of TCS were 0.03 μg/L for beverage samples and 0.2-0.3 μg/kg for food samples. The applicability of the method has been proven by analyzing TCC and TCS in different samples from supermarkets in Beijing. The proposed method is sufficiently sensitive and reliable for monitoring trace concentrations of TCC and TCS in food samples.

Light and Flexible Composite Nanofibrous Membranes for High-Efficiency Electromagnetic Absorption in a Broad Frequency

With the fast advancement of up-to-date communication technologies, electromagnetic wave (EMW) absorption materials are widely required for various applications. However, it is still a big challenge to produce lightweight, flexible, and high-efficiency EMW absorption materials in a broad-ranging frequency. Herein, we designed to fabricate the magnetic and dielectric nanofibrous membranes which can be effectively used as EMW absorption materials by facile electrospinning process. The as-fabricated composite carbon nanofibers (CNFs), which combined the components of nickel, cobalt antioxidant nanoparticles, and carbon nanotubes, exhibited outstanding magnetic and dielectric properties and strong absorption ability in a wide frequency range. These nanoparticles encapsulated in CNFs are extremely beneficial to the electrical conductivity of the composites through decreasing the contact loss within the CNFs by formation of the metal-metal interfaces. Correspondingly, the R_L value of -46.60 dB was reached at 4.88 GHz frequency range with a layer thickness of 5.5 mm for these mechanically light and flexible membranes. The enhanced absorption performance (<-10 dB) in the wide frequency band (4.16-18 GHz) can be achieved by selecting a suitable thickness of the material. Results demonstrate that the permittivity and permeability of developed samples have been largely improved because of the integrated interaction of all introduced components in the structure. The composite membranes are a promising candidate for scalable, lightweight, and high-performance EMW absorption materials in the frequency range from C band to Ku band (4-18 GHz).