A sensitive method to monitor catechol by using graphitic carbon nitride quantum dots as coreactants in Ru(bpy)32+-based electrochemiluminescent system

Binary-amplifying electrochemiluminescence sensor for sensitive assay of catechol and luteolin based on HKUST-1 derived CuO nanoneedles as a novel luminophore

Herein, a highly novel and effective electrochemiluminescence (ECL) sensor based on metal-organic framework (MOF, HKUST-1) derived CuO nanoneedles (HKUST-1 derived CuO NNs), gold nanoparticles (AuNPs) and TiO2 was developed for ultrasensitive detection of catechol and luteolin. The HKUST-1 derived CuO NNs were employed as luminophore for the first time, which were successfully fabricated by using HKUST-1 as precursor. The results revealed that the HKUST-1 derived CuO NNs exhibit excellent ECL activity ascribed to its abundant active site and the high specific surface area, thus obviously promoting the separation and transfer of charge and further improving the current density of ECL sensor. To binary-amplify the signal of the ECL sensor, the AuNPs and TiO2 nano-materials with good biocompatibility, great electron transport efficiency and high catalytic activity were used as co-reaction accelerators in the ECL process. Dependent on the above brilliant strategy, the proposed ECL sensor achieved wide linear ranges from 3 × 10-9 - 1 × 10-4 M for catechol and 1 × 10-8 - 2 × 10-4 M for luteolin, with the detection limits of 1.5 × 10-9 M for catechol and 5.3 × 10-9 M for luteolin, respectively. Furthermore, the ECL sensor exhibited outstanding selectivity, repeatability, stability and obtained great feedback on determination of catechol and luteolin in actual samples. The method not only filled a gap in the ECL application of MOF-derived materials but also provided a novel sight for design other highly efficient luminescent materials.

An ultrasensitive ratiometric aptasensor based on the dual-potential electrochemiluminescence of Ru(bpy)32+ in a novel ternary system for detection of Patulin in fruit products

To sensitively monitor trace-level of toxic patulin (PAT), an ultrasensitive PAT ratiometric aptasensor based on the dual-potential electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ was first proposed. Noteworthily, Ru(bpy)₃²⁺-doped trimetallic nanocube (Ru@Tri) innovatively integrated the luminophore and cathode coreaction accelerator (CCA), which could generate strong cathodic ECL in the existence of low concentration of K₂S₂O₈. Simultaneously, anthocyanin-derived carbon quantum dots (anth-CQDs) prepared from purple potato skins was first served as a green anodic coreactant. And SiO₂-coated anth-CQDs (anth-CQDs@SiO₂) exhibited excellent performance for enhancing anodic ECL of Ru@Tri. Based on this, a novel ternary ECL system was established. In the presence of PAT, the ECL intensity ratio of anode to cathode (I_ECL-A/I_ECL-C) was significantly increased, and a low detection limit of 0.05 pg mL^-1 was obtained. Moreover, when proposed method and high performance liquid chromatography (HPLC) were simultaneously applied to series of fruit products, the obtained results were completely consistent, reflecting its practicability.

Emerging Trends of Carbon-Based Quantum Dots: Nanoarchitectonics and Applications

Carbon-based quantum dots (QDs) have emerged as a fascinating class of advanced materials with a unique combination of optoelectronic, biocompatible, and catalytic characteristics, apt for a plethora of applications ranging from electronic to photoelectrochemical devices. Recent research works have established carbon-based QDs for those frontline applications through improvements in materials design, processing, and device stability. This review broadly presents the recent progress in the synthesis of carbon-based QDs, including carbon QDs, graphene QDs, graphitic carbon nitride QDs and their heterostructures, as well as their salient applications. The synthesis methods of carbon-based QDs are first introduced, followed by an extensive discussion of the dependence of the device performance on the intrinsic properties and nanostructures of carbon-based QDs, aiming to present the general strategies for device designing with optimal performance. Furthermore, diverse applications of carbon-based QDs are presented, with an emphasis on the relationship between band alignment, charge transfer, and performance improvement. Among the applications discussed in this review, much focus is given to photo and electrocatalytic, energy storage and conversion, and bioapplications, which pose a grand challenge for rational materials and device designs. Finally, a summary is presented, and existing challenges and future directions are elaborated.

Chloramphenicol-activated electro-chemiluminescent behavior of BNQDs-Ru(phen)32+ system for ultra-sensitive sensing of chloramphenicol in pharmaceutical and milk samples

To improve the sensitivity for electro-chemiluminescent (ECL) detection of chloramphenicol (CAP), a common broad-spectrum antibiotic, boron nitride quantum dots (BNQDs) were prepared with excellent photoelectric property and low toxicity. After its structure and electrochemical property were investigated in detail, it was noted that the ECL signal of Ru(Phen)₃²⁺could be strengthened by the proposed BNQDs, which was further activated by ten's times in the presence of CAP. Under the optimized conditions, there was an excellent linear relationship between ΔECL and lgc_CAPin a wide linear range from 1.0 × 10^-10to 1.0 × 10^-6mol l^-1CAP. The detection limit was super-low to be 3.3 × 10^-11mol l^-1(S/N = 3). When applied for CAP detection in real pharmaceutical and food samples, the recoveries were between 97.8% and 105.7% with R.S.D. less than 3.3%. A possible CAP-activated ECL mechanism of BNQDs-Ru(phen)₃²⁺was also proposed. This work will offer a great potential for efficient monitoring of CAP pollution and clinical diagnosing of CAP-related diseases in future.

A sensitive electrochemiluminescence biosensor for assay of cancer biomarker (MMP-2) based on NGQDs-Ru@SiO2 luminophore

A sensitive biosensor that can be used for the determination of matrix metalloproteinase 2 (MMP-2) was proposed. The biosensor was developed by using an excellent self-enhanced nanocomposites as an illuminant and a peptide as a recognition element. For the electrostatic attraction between Ru(bpy)₃²⁺ and nitrogen-doped graphene quantum dots (NGQDs), the self-enhanced electrochemiluminescence (ECL) nanocomposites of NGQDs-Ru(bpy)₃²⁺-doped silica nanoparticles (NGQDs-Ru@SiO₂) were synthesized through a simple sol-gel process. Then, a specific peptide (labeled sulfhydryl) was combined with the self-enhanced ECL nanocomposites (carboxyl in NGQDs) via acylation reaction to obtain the peptide-NGQDs-Ru@SiO₂ nanoprobe, which was fabricated onto the gold electrode surface via Au-S bond. The peptide of the ECL nanoprobe was exposed to cleavage in the presence of MMP-2, which caused the signal substance to move farther away from the electrode, leading to a decrease of the ECL signal. The proposed NGQDs-Ru@SiO₂-labeled peptide ECL biosensor displayed a lower detection limit of 6.5 pg mL^-1 than those of reported ECL methods. The proposed biosensor provided an outlook for future applications in other disease-associated biomarkers.

Facile synthesis of nitrogen-doped graphene quantum dots as nanocarbon emitters for sensitive detection of catechol

Development of nanomaterial-based electrochemiluminescence (ECL) emitters is highly desirable for the fabrication and wide applications of ECL sensors. Herein, nitrogen-doped graphene quantum dots (NGQDs) were easily synthesized as nanocarbon emitters with anodic ECL for sensitive ECL determination of catechol (CC). Facile synthesis of NGQDs was easily achieved using molecular fusion of a carbon precursor in a one-step hydrothermal process. The synthesis has advantages of simple and convenient operation and high yield. The as-prepared NGQDs have uniform size, good crystallinity, single-layered graphene structure, and excitation-independent fluorescence. In the presence of hydrogen peroxide (H₂O₂), NGQDs exhibit high anodic ECL owing to the presence of functional hydrazide groups. As CC could significantly reduce the ECL intensity of NGQDs, sensitive determination of CC was realized with a linear range from 100 nM to 10 μM and 10 μM to 60 μM with a low limit of detection (LOD, 42 nM). The determination of CC in environmental water was also achieved with high reliability.

Nitrogen-doped graphene quantum dots are easily synthesized and can be used as nanocarbon emitters for sensitive electrochemiluminescence detection of catechol.

Label-free Hg(II) electrochemiluminescence sensor based on silica nanoparticles doped with a self-enhanced Ru(bpy)32+-carbon nitride quantum dot luminophore

Herein, a label-free, self-enhanced electrochemiluminescence (ECL) sensing strategy for divalent mercury (Hg(II)) detection was presented. First, a novel self-enhanced ECL luminophore was prepared by combining the ECL reagent tris(2, 2'-bipyridyl) dichlororuthenium(II) hexahydrate (Ru(bpy)₃²⁺) and its co-reactant carbon nitride quantum dots (CNQDs) via electrostatic interactions. In contrast to traditional ECL systems where the emitter and its co-reactant underwent an intermolecular reaction, the self-enhanced ECL system exhibited a shortened electron-transfer distance and enhanced luminous efficiency because the electrons transferred from CNQDs to oxidized Ru(bpy)₃²⁺ via an intramolecular pathway. Furthermore, the as-prepared self-enhanced ECL material was encapsulated in silica (SiO₂) nanoparticles to generate a Ru-QDs@SiO₂ luminophore. Based on the different affinity of Ru-QDs@SiO₂ nanoparticles for single-stranded DNA (ssDNA) and Hg(II)-triggered double-stranded DNA (dsDNA), a label-free ECL biosensor for Hg(II) detection was developed as follows: in the absence of Hg(II), ssDNA was adsorbed on Ru-QDs@SiO₂ surface via hydrogen bond, electrostatic, and hydrophobic interaction. Thus, quenched ECL signal was observed. On the contrary, in the presence of Hg(II), stable dsDNA was formed and carried the ssDNA separating from Ru-QDs@SiO₂ surface, resulting in most of Ru-QDs@SiO₂ existing in their free state. Therefore, a recovered ECL intensity was obtained. On this basis, Hg(II) was measured by the proposed method in the range of 0.1 nM-10 μM, with a detection limit of 33 pM. Finally, Hg(II) spiked in water samples was measured to evaluate the practicality of the fabricated biosensor.