Study on the electrochemical behavior of BiVO4/PANI composite as a high performance supercapacitor material with excellent cyclic stability

AM, Beknalkar SA, Dhas SD, Shin DK. Ni3V2O8 Marigold Structures with rGO Coating for Enhanced Supercapacitor Performance

In this work, Ni3V2O8 (NVO) and Ni3V2O8-reduced graphene oxide (NVO-rGO) are synthesized hydrothermally, and their extensive structural, morphological, and electrochemical characterizations follow subsequently. The synthetic materials' crystalline structure was confirmed by X-ray diffraction (XRD), and its unique marigold-like morphology was observed by field emission scanning electron microscopy (FESEM). The chemical states of the elements were investigated via X-ray photoelectron spectroscopy (XPS). Electrochemical impedance spectroscopy (EIS), Galvanostatic charge-discharge (GCD), and cyclic voltammetry (CV) were used to assess the electrochemical performance. A specific capacitance of 132 F/g, an energy density of 5.04 Wh/kg, and a power density of 187 W/kg were demonstrated by Ni3V2O8-rGO. Key electrochemical characteristics were b = 0.67; a transfer coefficient of 0.52; a standard rate constant of 6.07 × 10-5 cm/S; a diffusion coefficient of 5.27 × 10-8 cm2/S; and a series resistance of 1.65 Ω. By employing Ni3V2O8-rGO and activated carbon, an asymmetric supercapacitor with a specific capacitance of 7.85 F/g, an energy density of 3.52 Wh/kg, and a power density of 225 W/kg was achieved. The series resistance increased from 4.27 Ω to 6.63 Ω during cyclic stability tests, which showed 99% columbic efficiency and 87% energy retention. The potential of Ni3V2O8-rGO as a high-performance electrode material for supercapacitors is highlighted by these findings.

Facile synthesis of multifunctional zinc vanadate/polyaniline composite for photocatalytic degradation and supercapacitor applications

Multifunctional Zn₃V₂O₈/Polyaniline (ZnV/PANI) composite was prepared by in-situ oxidative polymerization method. The formation of ZnV and ZnV/PANI composite was proved by various characterization tools including such as FTIR, XRD, SEM, BET, VSM, TEM and XPS analysis. The average crystalline size calculated using Scherrer equation of ZnV and ZnV/PANI were found to be 45 nm and 92 nm respectively. From the Tauc plots the bandgap values (E_g) were found to be 2.4 eV and 2.0 eV for ZnV and ZnV/PANI respectively. The FE-SEM images clearly show the flakes incorporated cluster-like morphology. The BET surface area of ZnV and ZnV/PANI was found to be 22 m² g^-1 and 40 m² g^-1. The XPS results also confirm the successful formation of ZnV/PANI composite. The as-prepared samples were utilized as photocatalyst and electrode materials for energy applications. The ZnV/PANI composite showed an outstanding photocatalytic activity (94%) in the degradation of aqueous RhB dye under visible light irradiation. The optimum catalyst dosage for the degradation of 50 mL of 1 × 10^-5 M RhB dye aqueous solution was 50 mg. The Langmuir-Hinselwood (L-H) kinetic model proves that the photodegradation mechanism follows pseudo-first order kinetics. Further, the supercapacitive behavior of the ZnV/PANI composite was tested using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) techniques in 1 M KOH electrolyte at the potential window of 0-0.55 V. ZnV/PANI electrode displayed a specific capacitance (C_sp) of 664 F g^-1 at 1 A/g. The satisfactory performance of ZnV/PANI composite is mainly ascribed to the synergistic effect of ZnV-PANI matrixes with the occurrence of multiple electroactive sites in the composite. The cycling stability test proved that ZnV/PANI electrode material retained 92% of its initial capacitance even after 6000 GCD cycles at 2 A/g. The finding of this study will help to determine the most efficient and cost-effective method for the removal of dyes from textile industry wastewater and also as an effective material for supercapacitor applications.

Biomimetic Synthesis of PANI/Graphitic Oxidized Carbon Nitride for Supercapacitor Applications

Polyaniline (PANI) composites have gained momentum as supercapacitive materials due to their high energy density and power density. However, some drawbacks in their performance remain, such as the low stability after hundreds of charge-discharge cycles and limitations in the synthesis scalability. Herein, we report for the first time PANI-Graphitic oxidized carbon nitride composites as potential supercapacitor material. The biomimetic polymerization of aniline assisted by hematin, supported by phosphorous and oxygen-modified carbon nitrides (g-POCN and g-OCN, respectively), achieved up to 89% yield. The obtained PAI/g-POCN and PANI/g-OCN show enhanced electrochemical properties, such as conductivity of up to 0.0375 S/cm, specific capacitances (C_s) of up to 294 F/g (at high current densities, 5 A/g) and a stable operation after 500 charge-discharge cycles (at 3 A/g). In contrast, the biomimetic synthesis of Free PANI, assisted by stabilized hematin in cosolvents, exhibited lower performance properties (65%). Due to their structural differences, the electrochemical properties of Free PANI (conductivity of 0.0045 S/cm and C_s of up to 82 F/g at 5 A/g) were lower than those of nanostructured PANI/g-POCN and g-OCN supports, which provide stability and improve the properties of biomimetically synthesized PANI. This work reveals the biomimetic synthesis of PANI, assisted by hematin supported by modified carbon nitrides, as a promising strategy to produce nanostructured supercapacitors with high performance.

Polyaniline-wrapped MnMoO4 as an active catalyst for hydrogen production by electrochemical water splitting

Developing efficient, low-cost, and environment-friendly electrocatalysts for hydrogen generation is critical for lowering energy usage in electrochemical water splitting. Moreover, for commercialization, fabricating cost-efficient, earth-abundant electrocatalysts with superior characteristics is of urgent need. Towards this endeavor, we report the synthesis of PANI-MnMoO₄ nanocomposites using a hydrothermal approach and an in situ polymerization method with various concentrations of MnMoO₄. The fabricated nanocomposite electrocatalyst exhibits bifunctional electrocatalytic activity towards the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) at a lower overpotential of 410 mV at 30 mA cm^-2 and 155 mV at 10 mA cm^-2, respectively in an alkaline electrolyte. Furthermore, while showing overall water splitting (OWS) performance, the optimized PM-10 (PANI-MnMoO₄) electrode reveals the most outstanding OWS performance with a lower cell voltage of 1.65 V (vs. RHE) at a current density of 50 mA cm^-2 with an excellent long-term cell resilience of 24 h.

Biomass-derived porous activated carbon from anacardium occidentale shell as electrode material for supercapacitors

Anacardium occidentale shell (AOS) biowaste was chemically activated using KOH at various temperatures to produce AC. Interestingly, this study also presents a novel strategy for achieving value-added usage of cashewnut shell in the energy storage field.

A review of π-conjugated polymer-based nanocomposites for metal-ion batteries and supercapacitors

Owing to their extraordinary properties of π-conjugated polymers (π-CPs), such as light weight, structural versatility, ease of synthesis and environmentally friendly nature, they have attracted considerable attention as electrode material for metal-ion batteries (MIBs) and supercapacitors (SCPs). Recently, researchers have focused on developing nanostructured π-CPs and their composites with metal oxides and carbon-based materials to enhance the energy density and capacitive performance of MIBs and SCPs. Also, the researchers recently demonstrated various novel strategies to combine high electrical conductivity and high redox activity of different π-CPs. To reflect this fact, the present review investigates the current advancements in the synthesis of nanostructured π-CPs and their composites. Further, this review explores the recent development in different methods for the fabrication and design of π-CPs electrodes for MIBs and SCPs. In review, finally, the future prospects and challenges of π-CPs as an electrode materials for strategies for MIBs and SCPs are also presented.

Promotion Effect of Palladium on BiVO4 Sensing Material for Epinephrine Detection

In this study, the Pd/BiVO4 composite was prepared by hydrothermal method as an electrochemical sensing material for epinephrine. X-ray diffraction, scanning electron microscopy, and a transmission electron microscope were used to characterize the samples. In the electrochemical detection system, cyclic voltammetry and differential pulse voltammetry were applied to measure the concentration of the epinephrine solution (0.9–27.5 µM) with the Pd/BiVO4-coated glassy carbon electrode. As a result, the oxidation peak current of Pd/BiVO4/GCE demonstrated good linearity with the epinephrine concentration. The detection limit of the epinephrine concentration by cyclic voltammetry and differential pulse voltammetry were 0.262 µM and 0.154 µM, respectively. Additionally, the proposed sensing material exhibited good reproducibility, stability, and selectivity. A plausible sensing mechanism was proposed.

BiVO4 prepared by the sol-gel doped on graphite felt cathode for ciprofloxacin degradation and mechanism in solar-photo-electro-Fenton

In this research, bismuth vanadate-doped graphite felt (GF-BiVO₄) was successfully prepared by sol-gel method, in which BiVO₄ owned superior electro-Fenton (EF) and solar-photo-electro-Fenton (SPEF) performance. Combined with the analysis by X-ray diffractometer (XRD), field emission transmission electron microscopy (FE-TEM), nitrogen adsorption-desorption isotherms and cyclic voltammetry (CV), the changes of electrodes were reflected in structure and physicochemical properties. The doping of monoclinic BiVO₄ endued GF with a higher surface area and more electro-active sites and better electrode activity in comparison to Raw-GF. Then, the GFs were used as cathodes to detect •OH concentration with coumarin (COU) as probe molecule and to evaluate photoelectric performance with ciprofloxacin (CIP) in photocatalysis, EF and SPEF processes. The results demonstrated that the concentration of •OH followed an order of SPEF> EF> photocatalysis, which was consistent with the removal rate of CIP (99.8%, 99.4% and 21.2%, respectively) on GF-BiVO₄ at 5 min. Further, five degradation pathways of CIP in SPEF system were proposed including the attack on piperazine ring, oxidation on cyclopropyl group, decarboxylation and hydroxyl radical addition, oxidation on benzene group and defluorination. The study provides insights into the enhancement of EF and SPEF performance and the degradation pathway of CIP in SPEF.

Investigation on NiWO4/PANI composite as an electrode material for energy storage devices

NiWO4/PANI was synthesized by an in situ chemical oxidative polymerization route. Incorporation of NiWO4 in a PANI matrix rendered high specific capacitance and salient morphological features.