Arsenic and chromium removal from water using biochars derived from rice husk, organic solid wastes and sewage sludge

Simultaneous immobilization strategy of anionic metalloids and cationic metals in agricultural systems: A review

Concurrent heavy metals remediation in natural environments poses significant challenges due to factors like metal speciation and interactions with soil moisture. This review focuses on strategies for immobilizing both anionic and cationic metals simultaneously in soil-crop systems. Key approaches include water management, biochar utilization, stabilizing agents, nanotechnology, fertilization, and bioremediation. Sprinkler or intermittent irrigation combined with soil amendments/biochar effectively immobilizes As/Cd/Pb simultaneously. This immobilization occurs through continuous adsorption-desorption, oxidation-reduction, and precipitation mechanisms influenced by soil pH, redox reactions, and Fe-oxides. Biochar from sources like wine lees, sewage sludge, spent coffee, and Fe-nanoparticles can immobilize As/Cd/Pb/Cr/Co/Cu/Zn together via precipitation. In addition, biochar from rice, wheat, corn straw, rice husk, sawdust, and wood chips, modified with chemicals or nanoparticles, simultaneously immobilizes As and Cd, containing higher Fe3O4, Fe-oxide, and OH groups. Ligand exchange immobilizes As, while ion exchange immobilizes Cd. Furthermore, combining biochar especially with iron, hydroxyapatite, magnetite, goethite, silicon, graphene, alginate, compost, and microbes-can achieve simultaneous immobilization. Other effective amendments are selenium fertilizer, Ge-nanocomposites, Fe-Si materials, ash, hormone, and sterilization. Notably, combining nano-biochar with microbes and/or fertilizers with Fe-containing higher adsorption sites, metal-binding cores, and maintaining a neutral pH could stimulate simultaneous immobilization. The amendments have a positive impact on soil physio-chemical improvement and crop development. Crops enhance production of growth metabolites, hormones, and xylem tissue thickening, forming a protective barrier by root Fe-plaque containing higher Fe-oxide, restricting upward metal movement. Therefore, a holistic immobilization mechanism reduces plant oxidative damage, improves soil and crop quality, and reduces food contamination.

Bio-derived carbon-based materials for sustainable environmental remediation and wastewater treatment

Biosynthesized nanocomposites, particularly those incorporating carbon-based materials, exhibit exceptional tunability and multifunctionality, surpassing the capabilities of conventional materials in these aspects. Developing practical solutions is critical to address environmental toxins from pharmaceuticals, heavy metals, pesticides, and dyes. Biomass waste is a readily available carbon source, which emerges as a promising material for producing biochar due to its inherent advantages: abundance, low cost, and environmentally friendly nature. This distribution mainly uses carbon-based materials (CBMs) and biomass waste in wastewater treatment. This review paper investigates several CBM types, including carbon aerogels, nanotubes, graphene, and activated carbon. The development of bio-derived carbon-based nanomaterials are discussed, along with the properties and composition of carbon materials derived from biomass waste and various cycles, such as photodegradation, adsorption, and high-level oxidation processes for natural remediation. In conclusion, this review examines the challenges associated with biochar utilization, including cost, recovery, and practical implementation.

Performance and Environmental Assessment of Biochar-Based Membranes Synthesized from Traditional and Eco-Friendly Solvents

Water contamination resulting from coal spills is one of the largest environmental problems affecting communities in the Appalachia Region of the United States. This coal slurry contains potentially toxic substances, such as hydrocarbons, heavy metals, and coal cleaning chemicals, and its leakage into water bodies (lakes, rivers, and aquifers) can lead to adverse health effects not only for freshwater bodies and plant life but also for humans. This study focused on two major experiments. The first experiment involved the use of biochar to create a biochar-polysulfone (BC-PSf) flat-sheet multifunctional membrane to remove organic contaminants, and the other major experiment compared eco-friendly (gamma-valerolactone-GVL; Rhodiasolv® PolarClean-PC) and petroleum-derived solvents (i.e., N-methyl-pyrrolidone-NMP) in the fabrication of the biochar-polysulfone membranes. The resulting membranes were tested for their efficiency in removing both positively and negatively charged organic contaminants from the collected water at varying pH values. A comparative life cycle assessment (LCA) with accompanying uncertainty and sensitivity analyses was carried out to understand the global environmental impacts of incorporating biochar, NMP, GVL, and PC in the synthesis of PSf/NMP, BC-PSf/NMP, PSf/GVL, BC-PSf/GVL, PSf/PC, and BC-PSf/PC membranes at a set surface area of 1000 m2. The results showed that the addition of biochar to the membrane matrix increased the surface area of the membranes and improved both their adsorptive and mechanical properties. The membranes with biochar incorporated in their matrix showed a higher potential for contaminant removal than those without biochar. The environmental impacts normalized to the BC-PSf/GVL membrane showed that the addition of biochar increased global warming impacts, eutrophication, and respiratory impacts by over 100% in all the membrane configurations with biochar. The environmental impacts were highly sensitive to biochar addition (Spearman's coefficient > 0.8). The BC/PSf membrane with Rhodiasolv® PolarClean had the lowest associated global environmental impacts among all the membranes with biochar. Ultimately, this study highlighted potential tradeoffs between functional performance and global environmental impacts regarding choices for membrane fabrication.

Recent Advancements in the Field of Chitosan/Cellulose-Based Nanocomposites for Maximizing Arsenic Removal from Aqueous Environment

Water remediation, acknowledged as a significant scientific topic, guarantees the safety of drinking water, considering the diverse range of pollutants that can contaminate it. Among these pollutants, arsenic stands out as a particularly severe threat to human health, significantly compromising the overall quality of life. Despite widespread awareness of the harmful effects of arsenic poisoning, there remains a scarcity of literature on the utilization of biobased polymers as sustainable alternatives for comprehensive arsenic removal in practical concern. Cellulose and chitosan, two of the most prevalent biopolymers in nature, provide a wide range of potential benefits in cutting-edge industries, including water remediation. Nanocomposites derived from cellulose and chitosan offer numerous advantages over their larger equivalents, including high chelating properties, cost-effective production, strength, integrity during usage, and the potential to close the recycling loop. Within the sphere of arsenic remediation, this Review outlines the selection criteria for novel cellulose/chitosan-nanocomposites, such as scalability in synthesis, complete arsenic removal, and recyclability for technical significance. Especially, it aims to give an overview of the historical development of research in cellulose and chitosan, techniques for enhancing their performance, the current state of the art of the field, and the mechanisms underlying the adsorption of arsenic using cellulose/chitosan nanocomposites. Additionally, it extensively discusses the impact of shape and size on adsorbent efficiency, highlighting the crucial role of physical characteristics in optimizing performance for practical applications. Furthermore, this Review addresses regeneration, reuse, and future prospects for chitosan/cellulose-nanocomposites, which bear practical relevance. Therefore, this Review underscores the significant research gap and offers insights into refining the structural features of adsorbents to improve total inorganic arsenic removal, thereby facilitating the transition of green-material-based technology into operational use.

Remediation of arsenic and fluoride from groundwater: a critical review on bioadsorption, mechanism, future application, and challenges for water purification

In the past few decades, the excessive and inadequate use of technological advances has led to groundwater contamination, mainly caused by organic and inorganic pollutants, which are highly harmful to human health, agriculture, water bodies, and aquaculture. Among all toxic pollutants, As and F- play a significant role in groundwater contamination due to their excellent reactivity with other elements. To mitigate the prevalence of arsenic and fluoride within the water system, the use of biochar gives an attractive strategy for removing them mainly because of the substantial surface area, pore size, pH, aromatic structure, and functional groups inherent in biochar, which are primarily dependent upon its raw material and pyrolysis temperature. Researcher develops different methods like physiochemical and electrochemical for treating arsenic and fluoride contamination. Among all removal methods, bioadsorption using agricultural waste residues shows effective/feasible removal of As and F- due to its low cost, ecofriendly nature, readily available, and efficient reuse compared with several other harmful synthetic materials that demand costly design specifications. This study discusses current developments in bioadsorption methods for As and F- that use agricultural-based biomaterials and describes the prevailing state of arsenic and fluoride removal strategies that use biomaterials precisely.

Nanostructured, Biodoping-Activated Fungi-Modified Wood for Enhanced Cd2+ Removal: Performances and Insight on Adsorption Mechanisms

Nanostructured activated carbon (AC) adsorbents derived from woody biomass have garnered attention for their potential usage to remove toxic substances from the environment due to their high specific surface area, superior micro/mesoporosity, and tunable surface chemistry profile. However, chemical dopants widely used to enhance the chemical reactivity with heavy metals would pollute the environment and conflict with the vision of a cleaner and sustainable environment. Herein, we report a facile, green, and sustainable approach using fungi modification combined with alkali activation to produce AC for heavy metal removal. The decayed wood-derived AC (DAC) exhibited a high specific surface area of 2098 m2/g, and the content of O and N functional groups was 18 and 2.24%, respectively. It showed remarkable adsorption capacity toward Cd2+ of 148.7 mg/g, which was much higher than most reported Cd2+ adsorbents. Such excellent adsorption capacity was primarily based on enhanced physical adsorption (pore filling, π-π) and chemical adsorption (functional group complexation, ion exchange, and precipitation). Additionally, the DAC showed rapid kinetics and remarkable applicability in both dynamic environments and actual water samples. These results suggest that decayed wood has excellent potential for efficient use in the removal of Cd2+ from wastewater. Furthermore, these results indicate that decayed wood can be cleanly produced into high efficiency heavy metal adsorbents to realize value-added utilization of decayed wood.

Pyrolysed sewage sludge for metal(loid) removal and immobilisation in contrasting soils: Exploring variety of risk elements across contamination levels

Efficient treatment of sewage sludge may transform waste into stable materials with minimised hazardous properties ready for secondary use. Pyrolysed sewage sludge, sludgechar, has multiple environmental benefits including contaminant sorption capacity and nutrient recycling. The properties of five sludgechars were tested firstly for adsorption efficiency in laboratory solutions before prospective application to soils. A wide variety of metal(loid)s (As, Cd, Co, Cr, Cu, Ni, Pb, Sb, and Zn) was involved. Secondly, the sludgechars (3 % v/v) were incubated in five soils differing in (multi)-metal(loid) presence and the level of contamination. The main aim was to evaluate the metal(loid) immobilisation potential of the sludgechars for soil remediation. Moreover, nutrient supply was investigated to comprehensively assess the material's benefits for soils. All sludgechars were efficient (up to 100 %) for the removal of metal cations while their efficiency for metal(loid) anions was limited in aqueous solutions. Phosphates and sulphates were identified crucial for metal(loid) capture, based on SEM/EDS, XRD and MINTEQ findings. In soils, important fluctuations were observed for Zn, being partially immobilised by the sludgechars in high-Zntot soils, while partially solubilised in moderate to low-Zntot soils. Moreover, pH showed to be crucial for material stability, metal(loid) adsorption ability and their immobilisation in soils. Although metal(loid) retention was generally low in soils, nutrient enrichment was significant after sludgechar application. Long-term evaluation of the material sorption efficiency, nutrient supply, and ageing in soil environments will be necessary in future studies.

A mechanistic approach to arsenic adsorption and immobilization in aqueous solution, groundwater, and contaminated paddy soil using pine-cone magnetic biochar

Arsenic (As) poisoning in groundwater and rice paddy soil has increased globally, impacting human health and food security. There is an urgent need to deal with As-contaminated groundwater and soil. Biochar can be a useful remedy for toxic contaminants. This study explains the synthesis of pinecone-magnetic biochar (PC-MBC) by engineering the pinecone-pristine biochar with iron salts (FeCl3.6H2O and FeSO4.7H2O) to investigate its effects on As(V) adsorption and immobilization in water and soil, respectively. The results indicated that PC-MBC can remediate As(V)-contaminated water, with an adsorption capacity of 12.14 mg g-1 in water. Isotherm and kinetic modeling showed that the adsorption mechanism involved multilayer, monolayer, and diffusional processes, with chemisorption operating as the primary interface between As(V) and biochar. Post-adsorption analysis of PC-MBC, using FTIR and XRD, further revealed chemical fixing and outer-sphere complexation between As(V) and Fe, O, NH, and OH as the main reasons for As(V) adsorption onto PC-MBC. Recycling of PC-MBC also had excellent adsorption even after several regeneration cycles. Similarly, PC-MBC successfully immobilized As in paddy soil. Single and sequential extraction results showed the transformation of mobile forms of As to a more stable form, confirmed by non-destructive analysis using SEM, EDX, and elemental dot mapping. Thus, Fe-modified pine-cone biochar could be a suitable and cheap adsorbent for As-contaminated water and soil.

Potential use of Ulva intestinalis-derived biochar adsorbing phosphate ions in the cultivation of winter wheat Tristicum aestivum

In this work, the properties of biochar produced from green macroalga Ulva intestinalis by pyrolysis were studied at temperatures of 300, 500, and 700 °C. This biochar was characterized in terms of multielemental composition, BET surface area, total pore volume, and biosorption properties toward phosphate ions. Biochar produced at 700 °C-25 m2/g had the highest surface area. The kinetics and isotherms of sorption processes of phosphate ions as sorbate by these sorbents were investigated. Modified biochar was able to remove 84.3% of phosphate ions from wastewater, whereas non-modified biochar-only 40.6%. Hence, biochar enriched with phosphate ions can serve as a valuable soil amendment. Pot experiments performed on winter wheat (Triticum aestivum) with a 3% addition of dry Ulva intestinalis, pristine biochar, and Mg-modified biochar enriched with phosphate ions showed that these amendments stimulated plant growth (length and fresh weight of plants) as well as enlarging the chlorophyll content in leaves. Our results indicate that the production of biochar (pristine and Mg-impregnated) is a sustainable option to valorize the biomass of seaweeds, and to recycle phosphorus from wastewater.

Removal of cadmium from aqueous solution by magnetic biochar: adsorption characteristics and mechanism

Experiments were conducted to investigate the potential of the efficient resource utilization of waste cow manure and corn straw in an agricultural ecosystem. In this study, a magnetic cow manure and straw biochar were synthesized by a co-precipitation method, and cadmium (Cd(II)) was removed by adsorption in aqueous solution. Several physicochemical characterization techniques were applied, including SEM, BET, Zeta, FTIR, Raman, XPS, and VSM. The effects of pH value, magnetic biochar content, adsorption kinetics, and isothermal adsorption on the adsorption of Cd(II) were investigated. The physicochemical characterizations revealed that the physical and chemical properties of the magnetic biochar were substantially changed compared to the unmodified biochar. The results showed that the surface of the biochar became rough, the number of oxygen (O)-containing functional groups increased, and the specific surface area increased. The results of the adsorption experiments showed that the adsorption capacity was affected by pH, magnetic biochar addition, Cd(II) concentration, and adsorption time. The adsorption kinetics and isothermal adsorption experiments showed that the Cd(II) adsorption processes of the cow manure and corn straw magnetic biochars were consistent with the Freundlich model and pseudo-second-order kinetic model. The results also showed that the Cd(II) adsorption effect of cow manure magnetic biochar was found to be more effective than that of corn straw magnetic biochar. The optimal conditions for Cd(II) adsorption were 800 ℃ for cow manure magnetic biochar, with a pH value of 5 and 0.14 g biochar addition, and 600 ℃ for straw magnetic biochar with a pH value of 8 and 0.12 g biochar addition. In conclusion, the cow manure magnetic biochar was an effective adsorbent for the absorption of Cd(II) in wastewater.

Hydrochar-nanoparticle integration for arsenic removal from wastewater: Challenges, possible solutions, and future horizon

Arsenic (As) contamination poses a significant threat to human health, ecosystems, and agriculture, with levels ranging from 12 to 75% attributed to mine waste and stream sediments. This naturally element is abundant in Earth's crust and gets released into the environment through mining and rock processing, causing ≈363 million people to depend on As-contaminated groundwater. To combat this issue, introducing a sustainable hydrochar system has achieved a remarkable removal efficiency of over 92% for arsenic through adsorption. This comprehensive review presents an overview of As contamination in the environment, with a specific focus on its impact on drinking water and wastewater. It delves into the far-reaching effects of As on human health, ecosystems, aquatic systems, and agriculture, while also exploring the effectiveness of existing As treatment systems. Additionally, the study examines the potential of hydrochar as an efficient adsorbent for As removal from water/wastewater, along with other relevant adsorbents and biomass-based preparations of hydrochar. Notably, the fusion of hydrochar with nanoparticle-centric approaches presents a highly promising and environmentally friendly solution for achieving the removal of As from wastewater, exceeding >99% efficiency. This innovative approach holds immense potential for advancing the realms of green chemistry and environmental restoration. Various challenges associated with As contamination and treatment are highlighted, and proposed solutions are discussed. The review emphasizes the urgent need to advance treatment technologies, improve monitoring methods, and enhance regulatory frameworks. Looking outlook, the article underscores the importance of fostering research efforts, raising public awareness, and fostering interdisciplinary collaboration to address this critical environmental issue. Such efforts are vital for UN Sustainable Development Goals, especially clean water and sanitation (Goal 6) and climate action (Goal 13), crucial for global sustainability.

Hydrothermal Ammonia Carbonization of Rice Straw for Hydrochar to Separate Cd(II) and Zn(II) Ions from Aqueous Solution

Hydrochar is considered to be a good adsorbent for the separation of metal ions from aqueous solutions. However, the yield of hydrochar from raw straw is generally low, because the hydrothermal carbonization occurs via dehydration, polymerization, and carbonization. In this work, various hydrochar samples were prepared from rice straw with nitrogen and phosphorus salt; moreover, toilet sewage was used instead of nitrogen, and phosphorus salt and water were used to promote the polymerization and carbonization process. The modified carbon was characterized using XRD, XPS, SEM, and FTIR, and the adsorption capacity was investigated. A significant increase in hydrochar yield was observed when toilet sewage was used as the solvent in the hydrothermal carbonization process. The adsorption capacity of N/P-doped rice straw hydrochar for Cd2+ and Zn2+ metal ions was 1.1-1.4 times higher than that those using the rice straw hydrochar. The Langmuir models and pseudo-second-order models described the metal adsorption processes in both the single and binary-metal systems well. The characterization results showed the contribution of the surface complexation, the electrostatic interaction, the hydrogen bond, and the ion exchange to the extraction of Cd2+ and Zn2+ using N/P-doped rice straw hydrochar.

Behavior of heavy metals in municipal sludge during dewatering: The role of conditioners and extracellular polymeric substances

Heavy metals, the main harmful substances in the sludge, are easily enriched, have adverse effects on the treatment and disposal of the sludge. In this study, two conditioners (modified corn-core powder, MCCP, and sludge-based biochar, SBB) were separately added and jointly added into municipal sludge to enhance sludge dewaterability. Meanwhile, diverse organics, such as extracellular polymeric substances (EPS), were released under pretreatment. The different organics had different effects on each heavy metal fraction and changed the toxicity and bioavailability of the treated sludge. The exchangeable fraction (F4) and carbonate fraction (F5) of heavy metal were nontoxic and nonbioavailable. When MCCP/SBB was used to pretreat the sludge, the ratio of metal-F4 and -F5 decreased, indicating that MCCP/SBB reduced the biological availability and ecological toxicity of the heavy metals in the sludge. These results were consistent with the calculation of the modified potential ecological risk index (MRI). To understand the detailed function of organics in the sludge network, the relationship between EPS, the secondary structure of the protein, and heavy metals was analyzed. The analyses revealed that the increasing proportion of β-sheet in soluble EPS (S-EPS) generated more active sites in the sludge system, which enhanced the chelate or complex function among organics and heavy metals, thus reducing the migration risks.

Natural ageing of biochar improves its benefits to soil Pb immobilization and reduction in soil phytotoxicity

Amendments are good tools for immobilizing metal(loid) and improving phytoremediation success. However, the amendment effect is variable and depends on multiple parameters, including amendment type and ageing. Such an ageing effect is rarely studied. Our study is one of the first focusing on how biochar storage affects its effect on soil properties and metal(loid) immobilization, when biochar was applied alone or in combination with green manure. To answer this, a 33-day pot incubation experiment was set up using contaminated soil, amended with two biochars (differing in ages: old (Bo) and new (Bn)) and/or two green manures (leaves of clover or poplar) and sown with Phaseolus vulgaris (bioindicator plant). Soil pore waters, plant growth and metal(loid) accumulation were evaluated. Biochar reduced soil acidity (Bn: + 0.75 pH unit, Bo: + 0.72 unit) and Pb mobility (Bn: - 42%, Bo: - 50%), while green manures acidified the soil (- 0.30 pH unit) and immobilized Pb only after 10 days (- 44%). All amendments reduced soil phytotoxicity. Moreover, the biochar stored at room temperature for a few years demonstrated better abilities to improve soil properties, particularly for Pb immobilization, than the biochar freshly prepared. Finally, as mixtures maturated, soil parameters changed until about ten days, then tended to stabilize. Therefore, it can be concluded that (1) biochar storage will affect its chemical properties and ameliorate its effects, (2) biochar can ameliorate soil properties and immobilize metal(loid)s, while green manures tended to have adverse effects at first, and (3) soil/amendment mixtures should be left to mature about two weeks before potential plant implementation.

Fabrication of Nitrogen-Doped Carbon@Magnesium Silicate Composite by One-Step Hydrothermal Method and Its High-Efficiency Adsorption of As(V) and Tetracycline

Tetracycline (TC) and arsenic contaminants are two main pollutants in aquaculture and livestock husbandry, and they have drawn worldwide attention. To address this issue, a novel N-doped carbon@magnesium silicate (CMS) was fabricated via a facile and low-cost hydrothermal route, adopting glucose and ammonia as C and N sources, respectively. The synergetic combination of carbon and magnesium silicate makes CMS possess a high surface area of 201 m2/g and abundant functional groups. Due to the abundant C- and N-containing functional groups and Mg-containing adsorptive sites, the maximum adsorption capacity values of CMS towards As(V) and TC are 498.75 mg/g and 1228.5 mg/g, respectively. The type of adsorption of As(V) and TC onto CMS is monolayer adsorption. An adsorption kinetic study revealed that the mass transfer and intraparticle process dominates the sorption rate of As(V) and TC adsorption onto CMS, respectively. Various functional groups synthetically participate in the adsorption process through complexion, π-π EDA interactions, and hydrogen bonds. This work provides a one-step, low-cost route to fabricate a N-doped carbonaceous adsorbent with a high surface area and abundant functional groups, which has great potential in the application of practical sewage treatment.

High-Efficiency Removal of Lead and Nickel Using Four Inert Dry Biomasses: Insights into the Adsorption Mechanisms

In this study, inert dry bioadsorbents prepared from corn cob residues (CCR), cocoa husk (CH), plantain peels (PP), and cassava peels (CP) were used as adsorbents of heavy metal ions (Pb²⁺ and Ni²⁺) in single-batch adsorption experiments from synthetic aqueous solutions. The physicochemical properties of the bioadsorbents and the adsorption mechanisms were evaluated using different experimental techniques. The results showed that electrostatic attraction, cation exchange, and surface complexation were the main mechanisms involved in the adsorption of metals onto the evaluated bioadsorbents. The percentage removal of Pb²⁺ and Ni²⁺ increased with higher adsorbent dosage, with Pb²⁺ exhibiting greater biosorption capacity than Ni²⁺. The bioadsorbents showed promising potential for adsorbing Pb²⁺ with monolayer adsorption capacities of 699.267, 568.794, 101.535, and 116.820 mg/g when using PP, CCR, CH, and CP, respectively. For Ni²⁺, Langmuir's parameter had values of 10.402, 26.984, 18.883, and 21.615, respectively, for PP, CCR, CH, and CP. Kinetics data fitted by the pseudo-second-order model revealed that the adsorption rate follows this order: CH > CP > CCR > PP for Pb²⁺, and CH > CCR > PP > CP for Ni²⁺. The adsorption mechanism was found to be controlled by ion exchange and precipitation. These findings suggest that the dry raw biomasses of corn cob residues, cocoa husk, cassava, and plantain peels can effectively remove lead and nickel, but further research is needed to explore their application in industrial-scale and continuous systems.

Biochar modification to enhance arsenic removal from water: a review

Arsenic (As) contamination is a major threat to drinking water quality throughout the world, and the development of appropriate remediation methods is critical. Adsorption is considered the most effective method for remediation of As-contaminated water. Biochar is a promising adsorbent and widely discussed for As removal due to its potential low cost and environmental friendliness. However, pristine biochar generally exhibited relatively low adsorption capacity for As mainly due to the electrostatic repulsion between the negatively charged biochar and As. Biochar modification, especially metal modification, was developed to boost the adsorption capacity for As. A systematic analysis of As removal as affected by biochar properties and modification will be of great help for As removal. This paper presents a comprehensive review on As removal by biochars from different feedstock, preparation procedures, and modification methods, with a major focus on the possible mechanisms of interaction between As and biochar. Biochar derived from sewage sludge exhibited relatively high adsorption capacity for As. Considering energy conservation, biochars prepared at 401-500 °C were more favorable in adsorbing As. Fe-modified biochar was the most popular modified biochar for As remediation due to its low cost and high efficiency. In addition, the limitations of the current studies and future perspectives are presented. The aim of this review is to provide guidance for the preparation of low-cost, environmentally friendly, and high efficiency biochar for the remediation of As-contaminated water.

Cyanidiales-Based Bioremediation of Heavy Metals

With growing urbanization and ongoing development activities, the consumption of heavy metals has been increasing globally. Although heavy metals are vital for the survival of living beings, they can become hazardous when they surpass the permissible limit. The effect of heavy metals varies from normal to acute depending on the individual, so it is necessary to treat the heavy metals before releasing them into the environment. Various conventional treatment technologies have been used based on physical, chemical, and biological methods. However, due to technical and economic constraints and poor sustainability towards the environment, the use of these technologies has been limited. Microalgal-based heavy metal removal has been explored for the past few decades and has been seen as an effective, environment-friendly, and inexpensive method compared to conventional treatment technology. Cyanidiales that belong to red algae have the potential for remediation of heavy metals as they can withstand and tolerate extreme stresses of heat, acid salts, and heavy metals. Cyanidiales are the only photosynthetic organisms that can survive and thrive in acidic mine drainage, where heavy metal contamination is often prevalent. This review focuses on the algal species belonging to three genera of Cyanidiales: Cyanidioschyzon, Cyanidium, and Galdieria. Papers published after 2015 were considered in order to examine these species' efficiency in heavy metal removal. The result is summarized as maximum removal efficiency at the optimum experimental conditions and based on the parameters affecting the metal ion removal efficiency. This study finds that pH, initial metal concentration, initial algal biomass concentration, algal strains, and growth temperature are the major parameters that affect the heavy metal removal efficiency of Cyanidiales.

Chemical speciation determines combined cytotoxicity: Examples of biochar and arsenic/chromium

As both electron donors and acceptors, biochars (BCs) may interact with multivalent metal ions in the environment, causing changes in ionic valence states and resulting in unknown combined toxicity. Therefore, we systematically investigated the interaction between BCs and Cr (Cr(III) & Cr(VI)) or As (As(III) & As(V)) and their combined cytotoxicity in human colorectal mucosal (FHC) cells. Our results suggest that the redox-induced valence state change is a critical factor in the combined cytotoxicity of BCs with Cr/As. Specifically, when Cr(VI) was adsorbed on BCs, 86.4 % of Cr(VI) was reduced to Cr(III). In contrast, As(III) was partially oxidized to As(V) with a ratio of 37.2 %, thus reaching a reaction equilibrium. Meanwhile, only As(V) was released in the cell, which could cause more As(III) to be oxidized. As both Cr(III) and As(V) are less toxic than their corresponding counterparts Cr(VI) and As(III), different redox interactions between BCs and Cr/As and release profiles between BCs and Cr/As together lead to reduced combined cytotoxicity of BP-BC-Cr(VI) and BP-BC-As(III). It suggests that the valence state changes of metal ions due to redox effects is one of the parameters to be focused on when studying the combined toxicity of complexes of BCs with different heavy metal ions.

Arsenic removal from aqueous solution: A comprehensive synthesis with meta-data

Removal of arsenic from drinking water is one of the most important global concerns. Among the various techniques, adsorptive removal of arsenic is considered as a viable most effective method. However, limited attention is given to understand the overall relative sorption capacity of different sorbents (e.g., biocomposite, biochar and nano-composite etc.) since various factors influence the sorption capacity. The aim of this study is to assess the effectiveness of various adsorbents with quantitative estimation (Langmuir adsorption maxima, Qmax) as well as to evaluate the influence of experimental conditions on the achievement of maximum adsorption. A number of analyses including meta-analysis, analysis of variance (ANOVA), scientometric and regression were performed. The results revealed that among the sorbents, nanoparticles show the greatest sorption capacity while pre-doped biochar performed the best among different biochars. Average across all sorbents, As (V) removal efficacy was higher than As (III). As expected, a high point of zero charge (PZC) and higher positive surface charge favored adsorption. The relative contribution of different mechanisms was also discussed. Our scientometric analyses revealed that, research should focus on the development of low-cost adsorbents and increase their reusability, safe disposal of adsorbed arsenic. Altogether, our findings provide a molecular understanding of arsenic sorption to different sorbents with implications for tailoring a good sorbent for arsenic removal from drinking water.

Treatment of cadmium and zinc-contaminated water systems using modified biochar: Contaminant uptake, adsorption ability, and mechanism

Cd and Zn contamination in water occurs frequently that threatens water supply, human health, and food production. MnFeB, a novel absorbent biochar modified using KMnO₄ and hematite, was prepared and used for the treatment of Cd²⁺ and Zn²⁺solutions. MnFeB exhibits a rough surface structure, large specific surface area, higher total pore volume, massive functional groups, and abundant iron oxide, all of which contribute to higher Cd²⁺ and Zn²⁺ adsorption capacity. In single metal systems, maximum Cd²⁺ and Zn²⁺ adsorption capacities of MnFeB were 1.88 and 1.79 times higher than those of unmodified biochar (CSB). The maximum Cd²⁺ and Zn²⁺ adsorption capacities of MnFeB were 2.73 and 2.65 times higher than CSB in the binary metal system. Key adsorption mechanisms of Cd²⁺ and Zn²⁺ by MnFeB included electrostatic interaction, co-precipitation, π-π interaction, complexation, and ion exchange. Thus, MnFeB can be used as a novel absorbent to treat Cd and Zn-polluted water.

Sorption and post-sorption performances of Cd, Pb and Zn onto peat, compost and biochar

The development of waste-derived sorbents to immobilize potentially toxic elements (PTEs) is a promising strategy, contributing to the achievement of sustainable development goals (SDGs). Therefore, this study aimed to assess the sorption performance of cadmium (Cd), lead (Pb) and zinc (Zn), comparing sorbents derived from organic fraction of municipal solid waste (composts and biochars) with peat. The physicochemical characterization, equilibrium of sorption, post-sorption analyzes and bioaccessibility were investigated. Results showed that the sorbents have distinct characteristics; however, each material have their particularities favorable to sorption. For instance, peat and composts have the highest cation exchange capacity (800-1100 mmol_c kg^-1), while biochar produced at 700 °C has the highest specific surface area (91.21 m² g^-1). The sorption equilibrium data revealed the actual sorption capacity and was well explained by the Freundlich and Langmuir isotherms and, in some cases, by the Dubinin-Radushkevich model. Post-sorption analyzes indicated the occurrence of several sorption mechanisms, driven by the physicochemical properties. Electrostatic interaction stood out for peat and compost. The FTIR spectrum for peat proved the complexation with oxygenated functional groups. The composts showed variations in the released cations (e.g. Ca²⁺ and K⁺), indicating cation exchange. Differently, for biochars, the XRD patterns showed that precipitation or coprecipitation seems to be one of the main mechanisms, especially for Cd and Pb. Regarding human bioaccessibility, the results of the gastric phase simulation (pH∼1.20) revealed lower percentages of Pb (33-81%) than Cd (91-99%) or Zn (82-99%), especially for the highest concentrations. Nevertheless, in numerical terms, all bioaccessible concentrations inspire care. In conclusion, among the sorbents, composts and biochars presented the best sorption performances and, therefore, have great potential for environmental applications. Furthermore, the bioaccessibility findings indicate that these assays, still little used in experiments with sorbents, are an important tool that should be better explored in the assessment of the environmental risk associated with contamination.

Application of biochar as an innovative soil ameliorant in bioretention system for stormwater treatment: A review of performance and its influencing factors

As an emerging environment functional material, biochar has become a research hotspot in environmental fields because of its excellent ecological and environmental benefits. Recently, biochar has been used as an innovative soil ameliorant in bioretention systems (BRS) to effectively enhance pollutant removal efficiency for BRS. This paper summarizes and evaluates the performance and involved mechanisms of biochar amendment in BRS with respect to the removal of nutrients (TN (34-47.55%) and PO₄^3--P (47-99.8%)), heavy metals (25-100%), pathogenic microorganisms (Escherichia coli (30-98%)), and organic contaminants (77.2-100%). For biochar adsorption, the pseudo-second-order and Langmuir models are the most suitable kinetic and isothermal adsorption models, respectively. Furthermore, we analyzed and elucidated some factors that influence the pollutant removal performance of biochar-amended BRS, such as the types of biochar, the preparation process and physicochemical properties of biochar, the aging of biochar, the chemical modification of biochar, and the hydraulic loading, inflow concentration and drying-rewetting alternation of biochar-amended BRS. The high potential for recycling spent biochar in BRS as a soil ameliorant is proposed. Collectively, biochar can be used as an improved medium in BRS. This review provides a foundation for biochar selection in biochar-amended BRS. Future research and practical applications of biochar-amended BRS should focus on the long-term stability of treatment performances under field conditions, chemical modification with co-impregnated nanomaterials in biochar surface, and the durability, aging, and possible negative effects of biochar.

Impacts of pyrolysis temperatures on physicochemical and structural properties of green waste derived biochars for adsorption of potentially toxic elements

This study comparatively investigated the influence of changes in pyrolysis temperature on the physicochemical, structural, and adsorptive properties of biochars derived from a green waste (Cynodon dactylon L.). For this purpose, the biophysically dried green wastes were pyrolyzed at 400 °C, 600 °C, and 800 °C under the same pyrolysis conditions. The results revealed that the physicochemical and structural properties were varied, depending upon the pyrolysis temperatures. With the increase of pyrolysis temperature, the surface functional groups were escaped, the structure became more porous (pore volume of 0.089 ± 0.001), the metal oxides were remained consistent, and the biochars turned into more alkaline nature (pH of 11.9 ± 0.2). Furthermore, as referring to the adsorptive performance for potentially toxic elements, with experimental adsorption capacity of up to 33.7 mg g^-1 and removal rate up to 96% for a multi-metals containing solution, the biochars pyrolyzed at high temperature (800 °C) was significantly (p < 0.05) higher than those pyrolyzed at low temperature (400 °C). According to the physicochemical and structural properties, and the adsorptive performances of the biochars, the optimal pyrolysis temperature was herein recommended to be 800 °C.

Biochar Nanocomposite as an Inexpensive and Highly Efficient Carbonaceous Adsorbent for Hexavalent Chromium Removal

Biochar is commonly used for soil amendment, due to its excellent water-holding capacity. The Cr(VI) contamination of water is a current environmental issue in industrial regions. Here, we evaluated the effects of two-step modifications on boosting biochar's performance in terms of the removal of aqueous hexavalent chromium (Cr(VI)), along with investigating the alterations to its surface properties. The first modification step was heat treatment under air at 300 °C, producing hydrophilic biochar (HBC). The resulting HBC was then impregnated with zero-valent iron nanoparticles (nZVI), creating an HBC/nZVI composite, adding a chemical reduction capability to the physical sorption mechanism. Unmodified biochar (BC), HBC, and HBC/nZVI were characterized for their physicochemical properties, including surface morphology and elemental composition, by SEM/EDS, while functional groups were ascertained by FTIR and surface charge by zeta potential. Cr(VI) removal kinetic studies revealed the four-time greater sorption capacity of HBC than BC. Although unmodified BC showed faster initial Cr(VI) uptake, it rapidly worsened and started desorption. After nZVI impregnation, the Cr(VI) removal rate of HBC increased by a factor of 10. FTIR analysis of biochars after Cr(VI) adsorption showed the presence of Cr(III) oxide only on the used HBC/nZVI and demonstrated that the carbonyl and carboxyl groups were the main groups involved in Cr(VI) sorption. Modified biochars could be considered an economical substitute for conventional methods.

Removal of hexavalent chromium via biochar-based adsorbents: State-of-the-art, challenges, and future perspectives

Chromium originates from geogenic and extensive anthropogenic activities and significantly impacts natural ecosystems and human health. Various methods have been applied to remove hexavalent chromium (Cr(VI)) from aquatic environmental matrices, including adsorption via different adsorbents, which is considered to be the most common and low-cost approach. Biochar materials have been recognized as renewable carbon sorbents, pyrolyzed from various biomass at different temperatures under limited/no oxygen conditions for heavy metals remediation. This review summarizes the sources, chemical speciation & toxicity of Cr(VI) ions, and raw and modified biochar applications for Cr(VI) remediation from various contaminated matrices. Mechanistic understanding of Cr(VI) adsorption using different biochar-based materials through batch and saturated column adsorption experiments is documented. Electrostatic interaction and ion exchange dominate the Cr(VI) adsorption onto the biochar materials in acidic pH media. Cr(VI) ions tend to break down as HCrO₄^-, CrO₄^2-, and Cr₂O₇^2- ions in aqueous solutions. At low pH (∼1-4), the availability of HCrO₄^- ions attributes the electrostatic forces of attraction due to the available functional groups such as -NH₄⁺, -COOH, and -OH₂⁺, which encourages higher adsorption of Cr(VI). Equilibrium isotherm, kinetic, and thermodynamic models help to understand Cr(VI)-biochar interactions and their adsorption mechanism. The adsorption studies of Cr(VI) are summarized through the fixed-bed saturated column experiments and Cr-contaminated real groundwater analysis using biochar-based sorbents for practical applicability. This review highlights the significant challenges in biochar-based material applications as green, renewable, and cost-effective adsorbents for the remediation of Cr(VI). Further recommendations and future scope for the implications of advanced novel biochar materials for Cr(VI) removal and other heavy metals are elegantly discussed.

Current trends in production, morphology, and real-world environmental applications of biochar for the promotion of sustainability

Biochar has sparked a lot of interest in recent years for various applications such as contaminant removal, carbon sequestration and soil amendment. However, laboratory scale studies dominates over the real-world applications. In this study, we first enumerated on the various ongoing uses of biochar along with adsorption mechanism; and then identified the most suitable source, and efficient method for biochar production; and finally proposed real-world practical applications of biochar as an additive to control diffuse micropollutant pollution along the highways and railway tracks; as well as the pollution through agricultural runoff. We demonstrated that directly or indirectly, biochar can definitely help to achieve all the 17 Sustainable Development Goals. The study on the practical use of biochar is an emerging area, because a lot of research needs are there to realise the full-potential of biochar with ways of attaining sustainable development goals towards waste, energy and pollution management.

The reduction of the As and Pb phytotoxicity of a former mine technosol depends on the amendment type and properties

In remediation of metal(loid) polluted soils, it is crucial to improve soil conditions and reduce metal(loid) toxicity to permit plant growth. To do that, amendments, such as biochar, activated carbon, and redmud, can be applied to the soil. Their effects are dependent on their type and properties. The aims of this study were thus to evaluate the potential of diverse biochars, activated carbons, and redmuds to reduce phytotoxicity of a former mine technosol polluted with As and Pb. Two pots experiments were set up. The first one applied on Pontgibaud technosol ten biochars, eight activated carbons, and three redmuds, at 2% for the biochars and activated carbons and 1% for the redmud. Soil pore water properties (pH, electrical conductivity), metal(loid) mobility, and Phaseolus vulgaris growth were monitored. In a second experiment, the five best amendments, one redmud associated with two biochars and two activated carbons, selected based on their ability to improve soil conditions, immobilize metal(loid)s and improve plant growth, were applied. The same plant species was used and soil and plant parameters were measured. Results demonstrated that not all amendments were capable of ameliorating soil conditions and reducing soil phytotoxicity. Moreover, the five selected amendments (biochars from oak bark sapwood and bamboo, activated carbons from vegetal feedstock chemically activated and physically activated, modified redmud) showed good sorption capacity towards Pb, with maximum sorption capacity between 63 and 217 mg g^-1, depending on the amendment, and their combined application led to better soil properties improvement than the single amendments. However, plant growth was only ameliorated further than a single application in the redmud-biochar combination but not in the association of redmud with activated carbon. This study is one of the first to deliver a rapid phytotoxicity test screening demonstrating that redmud associated with particular biochar could be beneficial in reducing the phytotoxicity of technosol polluted with As and Pb and thus allow plant growth and a phytomanagement process.

Synergetic removal of thallium and antimony from wastewater with jacobsite-biochar-persulfate system

Both of thallium (Tl) and antimony (Sb) are toxic elements in the natural environment. Emerging Tl and Sb pollution in water has gradually gained public concerns globally. However, limited technologies are available for co-removal of Tl and Sb from wastewater. Herein, an novel system was successfully fabricated to enhance the synergetic removal of both Tl and Sb in wastewater. In this study, MnFe₂O₄-biochar composite (MFBC) facilely synthesized by a one-pot hydrothermal method was used as adsorbent and persulfate (PS) activator for simultaneously removing Tl and Sb from wastewater. The optimal reaction conditions for best removal efficiency of Tl and Sb simultaneously were obtained by using the response surface design combined with Box-Behnken Design (BBD) model. Results unveiled that the average removal rates of Tl and Sb can achieve 98.33% and 89.14%, respectively under the optimal reaction conditions. Electron Spin Resonance (ESR), and radical quenching experiments showed that OH^• and SO₄^•- play a critical role in the removal of Tl-Sb compound pollution. Via using different characterization, it is revealed that the mechanism of removing Tl-Sb containing wastewater by MFBC-1.4/PS system is oxidation, adsorption, complexation and ion exchange. All these results indicate that MFBC-1.4/PS technology is prospective in highly effective removal of Tl and Sb from wastewater simultaneously.

Effects of pyrolysis temperature and aging treatment on the adsorption of Cd2+ and Zn2+ by coffee grounds biochar

As an in-situ immobilization material for heavy metals, biochar can exist in the environment for thousands of years, while whether the natural aging would affect its heavy metals adsorption performance still remains unclear. Therefore, the coffee grounds biochar (CGB) was prepared under different pyrolysis temperatures (300, 500 and 700 °C) in this study, and the simulated artificial aging treatment was carried out to investigate the effects of pyrolysis temperature and aging treatment on Cd²⁺ and Zn²⁺ (both separate and combined conditions) adsorption performance of CGB. The result revealed that Fresh-CGB adsorption performance increased with increasing pyrolysis temperature, while the relationship was not so clear with Aged-CGB where adsorption performance peaked at medium pyrolysis temperature (500 °C) but reduced again as pyrolysis temperature increased to 700 °C. The changes of Aged-CGB adsorption performance for Cd²⁺ and Zn²⁺ represented the long-term performance of naturally aging biochar in environment, and a mid-range pyrolysis temperature would seem most appropriate for long-term application of biochar. The X-ray Diffraction (XRD) result revealed that the degree of graphitization of CGB increased with increasing pyrolysis temperature, which represents a stronger environmental stability as the weight loss of CGB300, CGB500 and CGB700 after aging treatment was 2.38%, 0.66%, and 0%, respectively. The EDS and FTIR results suggested that ion-exchange and complexation between CGB/Aged-CGB with Cd²⁺/Zn²⁺ played a dominant role in adsorption processes. In addition, the selectivity for Cd²⁺ was significantly improved after the aging treatment. This is desirable given the stronger toxicity of Cd²⁺ relative to Zn²⁺. In general, this study provides new insights into the practical application of biochar from the perspective of long-term effects.

Research Progress on Adsorption of Arsenic from Water by Modified Biochar and Its Mechanism: A Review

Arsenic (As) is a non-metallic element, which is widely distributed in nature. Due to its toxicity, arsenic is seriously harmful to human health and the environment. Therefore, it is particularly important to effectively remove arsenic from water. Biochar is a carbon-rich adsorption material with advantages such as large specific surface area, high porosity, and abundant functional groups, but the original biochar has limitations in application, such as limited adsorption capacity and adsorption range. The modified biochar materials have largely enhanced the adsorption capacity of As in water due to their improved physicochemical properties. In this review, the changes in the physicochemical properties of biochar before and after modification were compared by SEM, XRD, XPS, FT-IR, TG, and other characterization techniques. Through the analysis, it was found that the adsorbent dosage and pH are the major factors that influence the As adsorption capacity of the modified biochar. The adsorption process of As by biochar is endothermic, and increasing the reaction temperature is conducive to the progress of adsorption. Results showed that the main mechanisms include complexation, electrostatic interaction, and precipitation for the As removal by the modified biochar. Research in the field of biochar is progressing rapidly, with numerous achievements and new types of biochar-based materials prepared with super-strong adsorption capacity for As. There is still much space for in-depth research in this field. Therefore, the future research interests and applications are put forward in this review.

Impact of acceleration of agricultural and industrial waste conditioning on thermal drying of sewage sludge

Improving the dewatering performance of sludge is a necessary advancement for collaborative sludge disposal and energy-efficient utilization in power plants. Herein, the effects of temperature changes and the addition of drying accelerators derived from agricultural and industrial waste on the drying characteristics of sewage sludge (SS) were investigated from the perspectives of drying kinetics and micromorphology. According to the results, the drying time for sludge significantly showed a clear downward trend via medium-low temperature (160 °C) thermal drying, which subsequently reduced the energy input substantially. When the drying temperature was 160 °C, the ideal addition proportions of rice husk (RH), sludge ash (SA), and coal ash (CA) comprised 15%. The addition of SA prominently boosted the drying rate constant of the original sludge by 48%. Additionally, SEM images along with the spectral dimension obtained via fractal theory explicitly clearly demonstrated that SS + SA had more loose pore channels than other mixed samples. This provided a convenient approach to ensure the evaporation and migration of moisture and thereby shorten the drying time effectively. Consequently, the addition of sludge ash as a drying accelerator can promote the deep dewatering of sludge.

Method and mechanism of chromium removal from soil: a systematic review

Heavy metal pollution has increasingly affected human life, and the treatment of heavy metal pollution, especially chromium pollution, is still a major problem in the field of environmental governance. As a commonly used industrial metal, chromium can easily enter the environment with improperly treated industrial waste or wastewater, then pollute soil and water sources, and eventually accumulate in the human body through the food chain. Many countries and regions in the world are threatened by soil chromium pollution, resulting in the occurrence of cancer and a variety of metabolic diseases. However, as a serious threat to agriculture, food, and human health. Notwithstanding, there are limited latest and systematic review on the removal methods, mechanisms, and effects of soil chromium pollution in recent years. Hence, this article outlines some of the methods and mechanisms for the removal of chromium in soil, including physical, chemical, biological, and biochar methods, which provide a reference for the treatment and research on soil chromium pollution drawn from existing publications.

Biochar Adsorbents for Arsenic Removal from Water Environment: A Review

Arsenic intake can cause human health disorders to the lungs, urinary tract, kidney, liver, hyper-pigmentation, muscles, neurological and even cancer. Biochar is potent, economical and ecologically sound adsorbents for water purification. After surface modifications, adsorption capacity of biochar significantly increased due to high porosity and reactivity. Adsorption capacities of the biochar derived from the municipal solid waste and KOH mixed municipal solid waste were increased from 24.49 and 30.98 mg/g for arsenic adsorption. Complex formation, electrostatic behavior and ion exchange are important mechanisms for arsenic adsorption. Organic arsenic removal using biochar is a major challenge. Hence, more innovative research should be conducted to achieve one of the 17 sustainable development goals of the United Nations i.e. "providing safe drinking water for all". This review is focused on the arsenic removal from water using pristine and modified biochar adsorbents. Recent advances in production methods of biochar adsorbents and mechanisms of arsenic removal from water are also illustrated.

Rice Industry By-Products as Adsorbent Materials for Removing Fluoride and Arsenic from Drinking Water—A Review

In drinking water, high concentrations of fluoride and arsenic can have adverse effects on human health. Waste deriving from the rice industry (rice husk, rice straw, rice bran) can be promising adsorbent materials, because they are (i) produced in large quantities in many parts of the world, (ii) recoverable in a circular economy perspective, (iii) at low cost if compared to expensive conventional activated carbon, and (iv) easily manageable even in developing countries. For the removal of fluoride, rice husk and rice straw allowed to obtain adsorption capacities in the range of 7.9–15.2 mg/g. Using rice husk for arsenic adsorption, excellent results were achieved with adsorption capacities above 19 mg/g. The best results both for fluorides and arsenic (>50 mg/g) were found with metal- or chemical-modified rice straw and rice husk. Identifying the next steps of future research to ensure the upscaling of biochar from recovered by-products, it is fundamental to perform: (i) tests on real waters for multicomponent adsorption; (ii) experiments with pilot plants in continuous operation; (iii) cost analysis/real applicability of modification treatments such as metal coupling or chemical synthesis; (iv) more studies on the biochar stability and on its regeneration or recovery after use.

Enhanced Removal of Malachite Green Using Calcium-Functionalized Magnetic Biochar

To efficiently remove malachite green (MG), a novel calcium-functionalized magnetic biochar (Ca/MBC) was fabricated via a two-step pyrolysis method. Iron-containing oxides endowed the target complexes with magnetic properties, especially the chemotactic binding ability with MG, and the addition of calcium significantly changed the morphology of the material and improved its adsorption performance, especially the chemotactic binding ability with MG, which could be confirmed through FTIR, XPS, and adsorption experiments. Electrostatic adsorption, ligand exchange, and hydrogen bonding acted as essential drivers for an enhanced adsorption process, and the maximum theoretical adsorption capacity was up to 12,187.57 mg/g. Ca/MBC maintained a higher adsorption capacity at pH = 4–12, and after five adsorption–desorption cycles, the adsorption capacity and adsorption rate of MG remained at 1424.2 mg/g and 71.21%, highlighting the advantages of Ca/MBC on adsorbing MG. This study suggests that biochar can be modified by a green synthesis approach to produce calcium-functionalized magnetic biochar with excellent MG removal capacity. The synthetic material can not only remove pollutants from water but also provide an efficient way for soil remediation.

Sorption of arsenic by composts and biochars derived from the organic fraction of municipal solid wastes: Kinetic, isotherm and oral bioaccessibility study

The historic contamination of water and soils by arsenic (As) is an extremely alarming environmental and public health issue worldwide. This study investigated the relationship between As sorption and physicochemical properties of composts and biochars derived from the organic fraction of municipal solid wastes (OFMSW) towards the development of promising sorbents with value-added solid wastes management solutions. The sorbents were characterized and their effectiveness on the As sorption was tested. Several isothermal and kinetic sorption models were used for the prediction of sorption. Composts did not show promising sorption capacities, and in some cases, the As immobilization was practically null. In contrast, biochars achieved higher sorption performance, and the experimental data fitted well on Dubinin-Rabushkevich and Langmuir models, with higher R² values. The maximum sorption capacities of BC700 estimated by such models were 6.495 and 170.252 mg g^-1, respectively, whereas those of BC500 estimated by D-R and Langmuir models were only 0.066 and 0.070 mg g^-1, respectively. In sorption kinetics, As was retained onto biochars at a faster first stage, reaching equilibrium after approximately 1 h and 2 h for initial concentrations of 10 and 100 mg L^-1. The pseudo-second-order, Ritchie's second-order, Ritchie's, and Elovich models more adequately described the sorption kinetics of As onto biochars with high R² values. Overall, the complexation and precipitation were predominant mechanisms for As sorption by OFMSW-derived biochars. Furthermore, the mathematical models indicated contributions arise from physisorption and external and internal diffusion mechanisms. Although BC700 can immobilize large As amounts, the gastric phase of the oral bioaccessibility test revealed more than 80% of the sorbed As could be released under conditions similar to a human stomach (pH~1.2). Such conclusions have given important insights about the refining of effective and eco-friendly remediation technologies for the management and rehabilitation of As-contaminated soil and water, particularly in developing countries.

Removal of Arsenic by Wheat Straw Biochar from Soil

Biochar prepared from wheat straw (Triticum aestivum) at different pyrolysis temperatures was screened, followed by its application to soil for arsenic removal in the present study. Characterization of biochar by Field emission scanning electron microscope studies and Fourier thermal Infrared imaging showed smooth and porous biochar surface and abundance of surface functional groups. A low value of H/C was obtained by CHNS analyzer, indicating high stability of biochar. The surface area was 15.86 m²/g on an average. Batch sorption experiments were carried out to optimize conditions for arsenic sorption. Maximum arsenic removal of 83.7% was obtained when applied at a 7.5% dose for a contact time of 60 min at 25 °C. Isotherm, kinetic and thermodynamic studies revealed the feasibility of sorption and removal of arsenic through physisorption, chemisorption, ion exchange, and diffusion.

A systematic review on adsorptive removal of hexavalent chromium from aqueous solutions: Recent advances

The contamination of natural resources by hexavalent chromium (Cr(VI)) originating from natural and anthropogenic activities is a serious environmental concern. Although many articles on chromium remediation have been published, a comprehensive understanding of the mechanisms involved in remediation with different sorbents is not yet available. In this systematic review, the performance and applicability of several adsorptive materials for Cr(VI) removal from aqueous media are discussed, along with a detailed analysis of the mechanisms involved. Statistical analysis is applied to compare the efficacies of different adsorbents, while a similar approach is used to determine the effects of sorbent properties and experimental conditions on the adsorption capacity. A detailed analysis of the factors involved in fixed-bed column studies is also presented. A suitable desorption approach to the regeneration of the spent adsorbent and its adsorption performance in reuse is also examined. Among the different sorbents, nanoparticles and mineral-doped biochar were found to be the most effective sorbents, while the adsorption was higher at low pH (~4.0) than that at intermediate pH (6-8). Contrary to our expectation, adsorption was high for sorbents with low specific surface areas, suggesting that the adsorption of Cr(VI) is largely influenced by the chemical properties of the sorbents. The optimum adsorption in fixed-bed column systems is obtained at a lower Cr(VI) ion concentration, a lower influent flow rate, and a higher bed height. Since most of the studies reviewed herein were merely experimental and utilized ideal conditions with the presence of a single contaminant, i.e. Cr(VI) in water, further studies on adsorption dynamics with the presence of other interfering ions are suggested. This review is promising for the further development of Cr(VI) removal strategies and closes the research gaps pertaining to their challenges.

Active biochar-supported iron oxides for Cr(VI) removal from groundwater: Kinetics, stability and the key role of FeO in electron-transfer mechanism

Chromium (Cr), especially in forms of hexavalent chromium (Cr(VI)) remains a serious threat to public health and environmental safety for its high toxicity. Herein, two types of iron-modification methods adopting co-pyrolysis and surface-deposition respectively were carried out to prepare active Fe-biochar composites (FeBC) for Cr(VI) removal in the simulated groundwater environment. The systematic characterization demonstrated that larger BET surface area and diversified iron oxides of FeBC-1 obtained from the co-pyrolysis method contributed to higher adsorption and reduction activity towards Cr(VI) degradation in comparison with FeBC-2 produced from surface-deposition method. Further, FeO was evidenced to be a main active component for transforming Cr(VI) to lower-toxicity Cr(III) uniting XRD and XPS analysis. Also, the designed batch experiments aiming at deeper clarifying FeBC-1 revealed that the pseudo-second-order kinetic and intra-particle diffusion model could well describe the Cr(VI) sorption behaviors, suggesting that a single-layer, chemical adsorption process as well as internal particle diffusion both controlled the removal process of Cr(VI) using FeBC-1. Finally, the stability experiments stated that FeBC-1 was basically stable at acidic and neutral conditions. Thus, it was found that co-pyrolysis of FeBC-1 is a potential technology for Cr(VI) remediation.

The pH-sensitive sorption governed reduction of Cr(VI) by sludge derived biochar and the accelerating effect of organic acids

Reduction coupling immobilization is one of the most commonly adopted strategies for the remediation of Cr(VI) contamination. Biochar is a carbon-rich material with abundant active functional groups for sorption and reduction reactions. In previous reports, phytomass derived biochars and organic functional groups have been emphasized, while the performance of sludge derived biochar (SBC) has often been understated. In the present study, a 30 d kinetic study proved that the removal route involved the sorption of Cr(VI), reduction to Cr(III) and immobilization of Cr(III), and that the sorption process was the primary and rate determining step. As a result of the SBC alkalinity, the solution pH increased, and sorption was largely inhibited, which then governed the overall removal ratio. The FTIR spectra suggested the involvement of hydroxyls in these processes. Low molecular weight organic acids accelerated the removal process in the early phase and improved the reduction process.

Adsorption-Desorption Behavior of Arsenate Using Single and Binary Iron-Modified Biochars: Thermodynamics and Redox Transformation

Arsenic (As) is a dangerous contaminant in drinking water which displays cogent health risks to humans. Effective clean-up approaches must be developed. However, the knowledge of adsorption-desorption behavior of As on modified biochars is limited. In this study, the adsorption-desorption behavior of arsenate (As^V) by single iron (Fe) and binary zirconium-iron (Zr-Fe)-modified biosolid biochars (BSBC) was investigated. For this purpose, BSBC was modified using Fe-chips (FeBSBC), Fe-salt (FeCl₃BSBC), and Zr-Fe-salt (Zr-FeCl₃BSBC) to determine the adsorption-desorption behavior of As^V using a range of techniques. X-ray photoelectron spectroscopy results revealed the partial reduction of pentavalent As^V to the more toxic trivalent As^III form by FeCl₃BSBC and Zr-FeCl₃BSBC, which was not observed with FeBSBC. The Langmuir maximum As^V adsorption capacities were achieved as 27.4, 29.77, and 67.28 mg/g when treated with FeBSBC (at pH 5), FeCl₃BSBC (at pH 5), and Zr-FeCl₃BSBC (at pH 6), respectively, using 2 g/L biochar density and 22 ± 0.5 °C. Co-existing anions reduced the As^V removal efficiency in the order PO₄ ^3- > CO₃ ^2- > SO₄ ^2- > Cl^- > NO₃ ^-, although no significant inhibitory effects were observed with cations like Na⁺, K⁺, Mg²⁺, Ca²⁺, and Al³⁺. The positive correlation of As^V adsorption capacity with temperature demonstrated that the endothermic process and the negative value of Gibbs free energy increased (-14.95 to -12.47 kJ/mol) with increasing temperature (277 to 313 K), indicating spontaneous reactions. Desorption and regeneration showed that recycled Fe-chips, Fe-salt, and Zr-Fe-salt-coated biochars can be utilized for the effective removal of As^V up to six-repeated cycles.

Combining geophysics and material science for environmental remediation: Real-time monitoring of Fe-biochar arsenic wastewater treatment

In a column set-up, Fe modified biochar produced from date palm leaves was used to remove As (1 mg L^-1) from a laboratory-prepared wastewater. The wastewater treatment process was monitored in real-time by spectral induced polarization (SIP), over a wide range of frequencies (0.01-1000 Hz). Both 5 and 10% biochar-amended columns achieved As removal exceeding 98%. The SIP parameters appear to be sensitive on As removal processes, with the recorded trend following the conventional geochemical monitoring, while offering higher temporal resolution.

Exploring different mechanisms of biochars in removing hexavalent chromium: Sorption, reduction and electron shuttle

The role of different biochars in Cr(VI) removal process is not clear. Two raw materials with distinct components were prepared into biochars at various pyrolysis temperatures. The biochar derived from cotton stark (with less lignin than walnut shell) always had more surface functional groups. The pyrolysis temperature had a significant effect on the biochar. In the sorption experiments, the fitting results of two compartment models showed that slow compartment dominated by surface functional groups plays a leading role in the Cr(VI) removal by low-temperature char, while the contribution of the rapid or slow compartment to the process of high-temperature char was equal. In the experiment of biochar mediated the lactate to reduce Cr(VI), the biochar derived from walnut shell (richer lignin) had better conductivity due to its highly aromatic structure, which could directly transfer electrons. This study indicated that various biochars may play different roles in the Cr(VI) removal process.