Can zero-valent iron nanoparticles remove waterborne estrogens?

Tea saponin co-ball milled commercial micro zero-valent iron for boosting Cr(VI) removal

Tea saponins (TS), a natural biosurfactant extracted from tea trees, were co-ball milled with commercial micro zero-valent iron (mZVI) to produce TS modified mZVI (TS-BZVI) for efficient hexavalent chromium (Cr(VI)) removal. The findings demonstrated that TS-BZVI could nearly remove 100% of Cr(VI) within 2 h, which was 1.43 times higher than that by ball milled mZVI (BZVI) (70%). Kinetics analysis demonstrated a high degree of compatibility with the pseudo-second-order (PSO), revealing that TS-BZVI exhibited a 2.83 times faster Cr(VI) removal rate involved primarily chemisorption. Further, X-ray photoelectron spectroscopy (XPS) and X-ray absorption near edge structure (XANES) measurements indicated that the TS co-ball milling process improved the exposure of Fe(II) and Fe(0) on mZVI, which further promoted the Cr(VI) reduction process. Impressively, the introduction of TS increased the hydrophobicity of ZVI, effectively inhibiting the H2 evolution by 95%, thus improved electron selectivity for efficient Cr(VI) removal. Ultimately, after operating for 10 days, a simulated permeable reactive barrier (PRB) column experiment revealed that TS-BZVI had a higher Cr(VI) elimination efficiency than BZVI, indicating that TS-BZVI was promising for practical environment remediation.

Effective and reproducible biosynthesis of nanogold-composite catalyst for paracetamol oxidation

Pharmaceutical products are some of the most serious emergent pollutants in the environment, especially nowadays of the COVID-19 pandemic. In this study, nanogold-composite was prepared, and its catalytic activity for paracetamol degradation was investigated. Moreover, for the first time, recycled waste diatomite earth (WDE) from beer filtration was used for reproducible gold nanoparticle (Au NPs) preparation. We studied Au NPs by various psychical-chemical and analytical methods. Transmission and scanning electron microscopy were used for nanogold-composite morphology, size and shape characterization. Total element concentrations were determined using inductively coupled plasma mass and X-ray fluorescence spectrometry. X-ray powder diffraction analysis was used for crystal structure characterization of samples. Fourier transform infrared spectrometer was used to study the chemical changes before and after Au NP formation. The results revealed that the WDE served as both a reducing and a stabilizing agent for crystalline spherical 30 nm Au NPs as well as acting as a direct support matrix. The kinetics of paracetamol degradation was studied by high-performance liquid chromatography with a photodiode array detector. The conversion of paracetamol was 62% and 67% after 72 h in the absence or presence of light irradiation, respectively, with 0.0126 h^-1 and 0.0148 h^-1 reaction rate constants. The presented study demonstrates the successful use of waste material from the food industry for nanogold-composite preparation and its application as a promising catalyst in paracetamol removal.

Removal of estrogen pollutants using biochar-pellet-supported nanoscale zero-valent iron

Nanoscale zero-valent iron-supported biochar pellets (nZVI)-(BP) were synthesized via liquid-phase reduction and applied to estrogen removal, including estrone (E1), 17β-estradiol (E2), and estriol (E3). The performance of nZVI-BP, with respect to its characterization, removal kinetics, and isotherms, was investigated. The results showed that the adsorption equilibrium was reached within 10 min of exposure. The adsorption capacity of estrogen decreased with increasing solute pH and nZVI-BP dosage. The adsorptivity increased with increasing initial estrogen concentration. The estrogen behavior followed a pseudo-second-order kinetic model. The adsorption data of different initial estrogen concentrations fitted to Freundlich adsorption isotherms. In addition, a preliminary discussion of the adsorption mechanism of nZVI-BP for estrogens was provided.

Iron nanoparticles to recover a co-contaminated soil with Cr and PCBs

Little attention has been given to the development of remediation strategies for soils polluted with mixture of pollution (metal(loid)s and organic compounds). The present study evaluates the effectiveness of different types of commercial iron nanoparticles (nanoscale zero valent iron (nZVI), bimetallic nZVI-Pd, and nano-magnetite (nFe₃O₄)), for the remediation of an industrial soil co-contaminated with Cr and PCBs. Soil samples were mixed with nZVI, nZVI-Pd, or nFe₃O₄ at doses selected according to their reactivity with PCBs, homogenized, saturated with water and incubated at controlled conditions for 15, 45 and 70 days. For each sampling time, PCBs and chromium were analyzed in aqueous and soil fractions. Cr(VI) and Cr leachability (TCLP test) were determined in the soil samples. The treatment with the three types of iron nanoparticles showed significant reduction in Cr concentration in aqueous extracts at the three sampling times (> 98%), compared to the control samples. The leachability of Cr in treated soil samples also decreased and was stable throughout the experiment. Results suggested that nZVI and nZVI-Pd immobilized Cr through adsorption of Cr(VI) on the shell and reduction to Cr(III). The mechanism of interaction of nFe₃O₄ and Cr(VI) included adsorption and reduction although its reducing character was lower than those of ZVI nanoparticles. PCBs significantly decreased in soil samples (up to 68%), after 15 days of treatment with the three types of nanoparticles. However, nFe₃O₄ evidenced reversible adsorption of PCBs after 45 days. In general, nZVI-Pd reduced PCB concentration in soil faster than nZVI. Control soils showed a similar reduction in PCBs concentration as those obtained with nZVI and nZVI-Pd after a longer time (45 days). This is likely due to natural bioremediation, although it was not effective for Cr remediation. Results suggest that the addition of nZVI or nZVI-Pd and pseudo-anaerobic conditions could be used for the recovery of soil co-contaminated with Cr and PCBs.

17α-Ethinylestradiol (EE2): concentrations in the environment and methods for wastewater treatment – an update

17α-Ethinylestradiol (EE2) is a frequently used drug and an endocrine disruptive substance. Adverse effects on biota have been reported when they are exposed to this substance in the environment. The last review on EE2 in the environment was published in 2014. Since then, well above 70 studies on EE2 and related substances have been published. The aim of this review was therefore to bring together recent data with earlier ones. The topics emphasized were observable trends of environmental levels of EE2 and methods to reduce EE2 levels in wastewater, before it can enter the environment. This should give an overview of the recent knowledge and developments regarding these environmental aspects of EE2. In the studies discussed, EE2 levels in surface waters were well detectable in many countries, both above and below the predicted no effect concentration (PNEC) of 0.035 ng L⁻¹, although analytical methods used for the quantification often are unsatisfactory regarding their limit of detection. To support the degradation of EE2 prior to entry into the environment, appropriate treatment methods could help to control the emissions of EE2. Several methods for the reduction of EE2 levels of up to 100% removal efficiency were reported recently and are of chemical, biological, adsorptive or ion-exchange nature. Depending on the required properties like initial EE2 concentration or treatment duration, several promising methods are available.

17α-Ethinylestradiol (EE2) is a frequently used drug and an endocrine disruptive substance.

Biochar based sorptive remediation of steroidal estrogen contaminated aqueous systems: A critical review

Remediation of steroidal estrogens from aqueous ecosystems is of prevailing concern due to their potential impact on organisms even at trace concentrations. Biochar (BC) is capable of estrogen removal due to its rich porosity and surface functionality. The presented review emphasizes on the adsorption mechanisms, isotherms, kinetics, ionic strength and the effect of matrix components associated with the removal of steroidal estrogens. The dominant sorption mechanisms reported for estrogen were π-π electron donor-acceptor interactions and hydrogen bonding. Natural organic matter and ionic species were seen to influence the hydrophobicity of the estrogen in multiple ways. Zinc activation and magnetization of the BC increased the surface area and surface functionalities leading to high adsorption capacities. The contribution by persistent free radicals and the arene network of BC have promoted the catalytic degradation of adsorbates via electron transfer mechanisms. The presence of surface functional groups and the redox activity of BC facilitates the bacterial degradation of estrogens. The sorptive removal of estrogens from aqueous systems has been minimally reviewed as a part of a collective evaluation of micropollutants. However, to the best of our knowledge, a critique focusing specifically and comprehensively on BC-based removal of steroidal estrogens does not exist. The presented review is a critical assessment of the existing literature on BC based steroidal estrogen adsorption and attempts to converge the scattered knowledge regarding its mechanistic interpretations. Sorption studies using natural water matrices containing residue level concentrations, and dynamic sorption experiments can be identified as future research directions.

Feasibility and mechanism of enhanced 17β-estradiol degradation by the nano Zero Valent Iron-citrate system

17β-Estradiol (17β-E2) as a non-conventional pollutant with high damage, the effective removal of 17β-E2 had been studied wildly. In recent years, nano materials application enabled the rapid removal of 17β-E2. Nano zero valent iron (nZVI) as one of the most widely used nano materials could also be used to degrade 17β-E2. But, the degradation performance of nZVI was limited by oxidation and aggregation. Therefore, this study explored the degradation mechanisms of 17β-E2 by nZVI and the enhancement mechanisms of nZVI by citrate. Firstly, 17β-E2 could be effectively degraded under acidic conditions without the addition of citrate. Citrate had protective effect on nZVI, so the degradation efficiency in neutral condition and degradation rate at all pH values of 17β-E2 were enhanced greatly in nZVI-citrate system. 17β-E2 degradation was mainly about group change and cleavage of ring A, as well as dominated by O₂^-▪ and OH∙ in the absence and presence of citrate. The formation of dimers and trimers proved the existence of laccase-like reaction during the 17β-E2 degradation process by nZVI. In nZVI-citrate system, the laccase-like reaction was replaced by specific cross-coupling of 17β-E2, E1, and citrate. Overall, the study proved that citrate could enhance the degradation of 17β-E2 by nZVI.

Removal of Polycyclic Aromatic Hydrocarbons in a Heterogeneous Fenton Like Oxidation System Using Nanoscale Zero-Valent Iron as a Catalyst

Oil and gas effluents contains highly toxic and harmful organic pollutants. Therefore, it is necessary to eliminate and/or reduced the concertation of organic pollutants to a technologically acceptable levels before their discharge into water streams. This study investigates the application of nanoscale zero-valent iron (nZVI), and hydrogen peroxide (H2O2) for removal of organic pollutants from real oily produced water. Batch studies were performed and effect of different operating parameters, including concentration of nZVI and H2O2, pH and reaction time were studied. Moreover, optimization of independent variables was performed using central composite design (CCD) in response surface methodology (RSM). The experimental set up provided maximum removal efficiencies of 89.5% and 75.3% for polycyclic aromatic hydrocarbons (PAHs) and chemical oxygen demand (COD), respectively. The optimum values of independent variables such as concentrations of nZVI, and H2O2, contact time and pH were obtained as 4.35 g/L, 1.60 g/L, 199.9 min and 2.9, respectively. Predicted PAHs and COD removal efficiencies at the optimum values of independent variables were found as 89.3% and 75.7%, respectively which are in line with the experimental values. The study indicates that application of heterogeneous Fenton like oxidation system using nZVI as a catalyst is an efficient treatment method for removal of organic pollutants from real produced water.

Sustainable Synthesis of Nanoscale Zerovalent Iron Particles for Environmental Remediation

Nanoscale zerovalent iron (nZVI) particles represent an important material for diverse environmental applications because of their exceptional electron-donating properties, which can be exploited for applications such as reduction, catalysis, adsorption, and degradation of a broad range of pollutants. The synthesis and assembly of nZVI by using biological and natural sustainable resources is an attractive option for alleviating environmental contamination worldwide. In this Review, various green synthesis pathways for generating nZVI particles are summarized and compared with conventional chemical and physical methods. In addition to describing the latest environmentally benign methods for the synthesis of nZVI, their properties and interactions with diverse biomolecules are discussed, especially in the context of environmental remediation and catalysis. Future prospects in the field are also considered.

Regulation of engineered nanomaterials: current challenges, insights and future directions

Substantial production and wide applications of engineered nanomaterials (ENMs) have raised concerns over their potential influences on the environment and humans. However, regulations of products containing ENMs are scarce, even in countries with the greatest volume of ENMs produced, such as the United States and China. After a comprehensive review of life cycles of ENMs, five major challenges to regulators posed by ENMs are proposed in this review: (a) ENMs exhibit variable physicochemical characteristics, which makes them difficult for regulators to establish regulatory definition; (b) Due to diverse sources and transport pathways for ENMs, it is difficult to monitor or predict their fates in the environment; (c) There is a lack of reliable techniques for quantifying exposures to ENMs; (d) Because of diverse intrinsic properties of ENMs and dynamic environmental conditions, it is difficult to predict bioavailability of ENMs on wildlife and the environment; and (e) There are knowledge gaps in toxicity and toxic mechanisms of ENMs from which to predict their hazards. These challenges are all related to issues in conventional assessments of risks that regulators rely on. To address the fast-growing nanotechnology market with limited resources, four ENMs (nanoparticles of Ag, TiO₂, ZnO and Fe₂O₃) have been prioritized for research. Compulsory reporting schemes (registration and labelling) for commercial products containing ENMs should be adopted. Moreover, to accommodate their potential risks in time, an integrative use of quantitative structure-activity relationship and adverse outcome pathway (QSAR-AOP), together with qualitative alternatives to conventional risk assessment are proposed as tools for decision making of regulators.

Hydrothermal synthesis of montmorillonite/hydrochar nanocomposites and application for 17β-estradiol and 17α-ethynylestradiol removal

Montmorillonite/hydrochar (MMT/HC) with or without modification by KOH via hydrothermal carbonization process (HTC) were applied to remove 17β-estradiol (E2) and 17α-ethynylestradiol (EE2).

Comparing different commercial zero valent iron nanoparticles to immobilize As and Hg in brownfield soil

Nanoscale zero valent iron (nZVI) particles obtained by different methods differ in their structure, which lead to different reactivity, and therefore a likely difference in the remediation efficiency. The present study compares the effectiveness of three commercial ZVI nanoparticles to immobilize As and Hg in two soils (A and B) collected from a brownfield highly contaminated by mining and metallurgy activities. Scarce data are available on the effectiveness of nZVI for Hg immobilization in soil. Two commercial nZVI slurries from Toda (RNIP and RNIP-D) and one from Nano Iron (25S) were used at different doses (1, 5 and 10%). The metal(loid) availability and mobility was evaluated with the TCLP test and Tessier extraction procedure. The influence of nZVI application on As and Hg speciation was also evaluated as well as its impact on soil pH, electrical conductivity and soil phytotoxicity to vetch germination. The three commercial nZVI particles significantly reduced As and Hg availability in the two soils studied, which led to a decrease in soil phytotoxicity. At the dose of 5% of nZVI a decrease of exchangeable-As higher than 70% was observed for both soils, whereas in the case of Hg, a higher dose of nZVI (10%) was necessary to achieve reductions of exchangeable-Hg between 63 and 90% depending on the type of nZVI and soil. No impact on soil pH and electrical conductivity was observed. The effectiveness of metal(loid) immobilization depended on type of nZVI, soil properties and metal(loid) characteristics. Nanoparticles from Nano Iron showed better results for As immobilization whereas RNIP nanoparticles were more effective for Hg. Overall, 25S at the dose of 5% resulted more effective than RNIP nanoparticles for the reduction of exchangeable-As (in the range of 6-14%), whereas RNIP and RNIP-D were 10 and 13% more effective, respectively, for the reduction of exchangeable-Hg at the dose of 10% in soil B. Thus, nZVI can be used for the remediation of highly As and Hg polluted soils, although previous experiments at lab scale are necessary to determine the most viable type of nZVI and its dose.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.