Investigations on phosphorus recovery from aqueous solutions by biochars derived from magnesium-pretreated cypress sawdust

Divergent responses of phosphorus solubilizing bacteria with P-laden biochar for enhancing nutrient recovery, growth, and yield of canola (Brassica napus L.)

The growing global population has led to a heightened need for food production, and this rise in agricultural activity is closely tied to the application of phosphorus-based fertilizers, which contributes to the depletion of rock phosphate (RP) reserves. Considering the limited P reserves, different approaches were conducted previously for P removal from waste streams, while the adsorption of ions is a novel strategy with more applicability. In this study, a comprehensive method was employed to recover phosphorus from wastewater by utilizing biochar engineered with minerals such as calcium, magnesium, and iron. Elemental analysis of the wastewater following a batch experiment indicated the efficiency of the engineered biochar as an adsorbent. Subsequently, the phosphorus-enriched biochar, hereinafter (PL-BCsb), obtained from the wastewater, underwent further analysis through FTIR, XRD, and nutritional assessments. The results revealed that the PL-BCsb contained four times higher (1.82%) P contents which further reused as a fertilizer supplementation for Brassica napus L growth. PL-BCsb showed citric acid (34.03%), Olsen solution (10.99%), and water soluble (1.74%) P desorption. Additionally, phosphorous solubilizing bacteria (PSB) were incorporated with PL-BCsb along two P fertilizer levels P45 (45 kg ha-1) and P90 (90 kg ha-1) for evaluation of phosphorus reuse efficiency. Integrated application of PL-BCsb with half of the suggested amount of P45 (45 kg ha-1) and PSB increased growth, production, physiological, biochemical, and nutritional qualities of canola by almost two folds when compared to control. Similarly, it also improved soil microbial biomass carbon up to four times, alkaline and acid phosphatases activities both by one and half times respectively as compared to control P (0). Furthermore, this investigation demonstrated that waste-to-fertilizer technology enhanced the phosphorus fertilizer use efficiency by 55-60% while reducing phosphorus losses into water streams by 90%. These results have significant implications for reducing eutrophication, making it a promising approach for mitigating environmental pollution and addressing climate change.

Metal element-based adsorbents for phosphorus capture: Chaperone effect, performance and mechanism

Excessive phosphorus (P) enters the water bodies via wastewater discharges or agricultural runoff, triggering serious environmental problems such as eutrophication. In contrast, P as an irreplaceable key resource, presents notable supply-demand contradictions due to ineffective recovery mechanisms. Hence, constructing a system that simultaneously reduce P contaminants and effective recycling has profound theoretical and practical implications. Metal element-based adsorbents, including metal (hydro) oxides, layered double hydroxides (LDHs) and metal-organic frameworks (MOFs), exhibit a significant chaperone effect stemming from strong orbital hybridization between their intrinsic Lewis acid sites and P (Lewis base). This review aims to parse the structure-effect relationship between metal element-based adsorbents and P, and explores how to optimize the P removal properties. Special emphasis is given to the formation of the metal-P chemical bond, which not only depends on the type of metal in the adsorbent but also closely relates to its surface activity and pore structure. Then, we delve into the intrinsic mechanisms behind these adsorbents' remarkable adsorption capacity and precise targeting. Finally, we offer an insightful discussion of the prospects and challenges of metal element-based adsorbents in terms of precise material control, large-scale production, P-directed adsorption and effective utilization.

Efficient Adsorption of Nitrogen and Phosphorus in Wastewater by Biochar

Nitrogen and phosphorus play essential roles in ecosystems and organisms. However, with the development of industry and agriculture in recent years, excessive N and P have flowed into water bodies, leading to eutrophication, algal proliferation, and red tides, which are harmful to aquatic organisms. Biochar has a high specific surface area, abundant functional groups, and porous structure, which can effectively adsorb nitrogen and phosphorus in water, thus reducing environmental pollution, achieving the reusability of elements. This article provides an overview of the preparation of biochar, modification methods of biochar, advancements in the adsorption of nitrogen and phosphorus by biochar, factors influencing the adsorption of nitrogen and phosphorus in water by biochar, as well as reusability and adsorption mechanisms. Furthermore, the difficulties encountered and future research directions regarding the adsorption of nitrogen and phosphorus by biochar were proposed, providing references for the future application of biochar in nitrogen and phosphorus adsorption.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

Magnesium activation affects the properties and phosphate sorption capacity of poultry litter biochar

Biochars with a high affinity for phosphorus (P) are promising soil amendments for reducing P in agricultural run-off. Poultry litter (PL) is an abundant biochar feedstock. However, PL-derived biochars are typically high in soluble P and therefore require chemical modification to become effective P sorbents. This study investigated the effect of magnesium (Mg) activation on extractable P (EP) and P sorption capacities of PL-derived biochars. Biochar was produced at 500-900 °C from PL activated with 0-1 M Mg. Three differentially aged PL feedstocks were evaluated (1-, 3-5-, and 7-9-year-old). Increased Mg activation level and pyrolysis temperature both resulted in EP reductions from the biochars. Specifically, biochars produced at temperatures ≥ 700 °C from PL activated with ≥ 0.25 M Mg had negligible EP. X-ray diffractograms indicated that increased Mg loading favored the formation of stable Mg3(PO4)2 phases while increasing temperature favored the formation of both Mg3(PO4)2 and Ca5(PO4)3OH. Maximum P sorption capacities (Pmax) of the biochars were estimated by fitting Langmuir isotherms to batch sorption data and ranged from 0.66-10.35 mg g-1. Average Pmax values were not affected by PL age or pyrolysis temperature; however, biochars produced from 1 M Mg-activated PL did have significantly higher average Pmax values (p < 0.05), likely due to a greater abundance of MgO. Overall, the results demonstrated that Mg activation is an effective strategy for producing PL-derived biochars with the potential ability to reduce P loading into environmentally sensitive ecosystems.

Recent developments in metallic-nanoparticles-loaded biochars synthesis and use for phosphorus recovery from aqueous solutions. A critical review

Phosphorus (P) represents a major pollutant of water resources and at the same time a vital element for human and plants. P recovery from wastewaters and its reuse is a necessity in order to compensate the current important depletion of P natural reserves. The use of biochars for P recovery from wastewaters and their subsequent valorization in agriculture, instead of synthetic industrial fertilizers, promotes circular economy and sustainability concepts. However, P retention by pristine biochars is usually low and a modification step is always required to improve their P recovery efficiency. The pre- or post-treatment of biochars with metal salts seems to be one of the most efficient approaches. This review aims to summarize and discuss the most recent developments (from 2020- up to now) in: i) the role of the feedstock nature, the metal salt type, the pyrolysis conditions, and the experimental adsorption parameters on metallic-nanoparticles-loaded biochars properties and effectiveness in recovering P from aqueous solutions, as well as the dominant involved mechanisms, ii) the effect of the eluent solutions nature on the regeneration ability of P-loaded biochars, and iii) the practical challenges facing the upscaling of P-loaded biochars production and valorization in agriculture. This review shows that the synthesized biochars through slow pyrolysis at relatively high temperatures (up to 700-800 °C) of mixed biomasses with Ca- Mg-rich materials or impregnated biomasses with specific metals in order to from layered double hydroxides (LDHs) biochars composites exhibit interesting structural, textural and surface chemistry properties allowing high P recovery efficiency. Depending on the pyrolysis's and adsorption's experimental conditions, these modified biochars may recover P through combined mechanisms including mainly electrostatic attraction, ligand exchange, surface complexation, hydrogen bonding, and precipitation. Moreover, the P-loaded biochars can be used directly in agriculture or efficiently regenerated with alkaline solutions. Finally, this review emphasizes the challenges concerning the production and use of P-loaded biochars in a context of circular economy. They concern the optimization of P recovery process from wastewater in real-time scenarios, the reduction of energy-related biochars production costs and the intensification of communication/dissemination campaigns to all the concerned actors (i.e., farmers, consumers, stakeholders, and policymakers) on the benefits of P-loaded biochars reuse. We believe that this review is beneficial for new breakthroughs on the synthesis and green application of metallic-nanoparticles-loaded biochars.

Thermally modified bamboo-eggshell adsorbent for phosphate recovery and its sustainable application as fertilizer

Phosphate recovery from wastewater using readily available biowaste-based adsorbents is beneficial for both eutrophication control and waste management. Bamboo char has a high-density porous structure and eggshell contains CaCO₃ with high affinity for phosphate. The combination of calcined bamboo and eggshell is a potential adsorbent for P recovery that has not been tested previously. Because bamboo char and eggshell both are popular for soil amendment, a P-loaded bamboo and eggshell composite is a promising fertilizer for long-term soil improvement. In this work, the feasibility of calcined bamboo and eggshell (BE) for P recovery and its use as fertilizer were investigated. The adsorption capacity and mechanism were examined using adsorption kinetic, isotherm, and thermodynamic analysis. The kinetic study showed that the experimental data sets were fitted best by a pseudo second-order model, indicating chemisorption. The Langmuir isotherm model estimated maximum adsorption capacities of 95.14 and 98.40 mg/g for BE 1:1 and 2:1 adsorbent. Monolayer adsorption occurred on a homogenous surface. The adsorption reaction was non-spontaneous at 298 K and exothermic for the BE 1:1 and 2:1 adsorbent, and the calculated Langmuir separation factor indicated favorable conditions for P adsorption. The desorption study showed lower P desorption capacity in water than in neutral ammonium citrate. P-loaded eggshell-modified bamboo char was an effective slow-release fertilizer for Japanese mustard spinach cultivation, which is a sustainable and environment friendly use of P-loaded materials.

Nitrogen retention potentials of magnesium oxide- and sepiolite-modified biochars and their impacts on bacterial distribution under nitrogen fertilization

Mitigating the loss and negative impacts of reactive N from fertilized soils remains a global environmental challenge. To optimize N retention by biochar, bamboo and pig manure biochars were modified as MgO- and sepiolite-biochar composites and characterized. Novel soil application of the modified biochars and their raw forms were comparatively evaluated for N-retention in a fertilized soil leached for 90 days in a column experiment. Changes in N-cycling-related enzyme and bacterial structure were also reported after 90 days. Results revealed low leaching losses of NH₄⁺, which reduced over time across all the treatments. However, while sole fertilizer (F) increased the initial and cumulative NO₃^- leached from the soil, the MgO-bamboo biochar (MgOBF) and sepiolite-bamboo biochar (SBF) treatments reduced leachate NO₃^- by 22.1 % and 10.5 % compared to raw bamboo biochar (BBF) treatment. However, 15.5 % more NO₃^- was leached from the MgO-pig manure biochar-treated soil (MgOPF) compared to its raw biochar treatment (PMBF) after 90 days. Dissolved organic N leached was reduced by 9.2 % and 0.5 % in MgOBF and SBF, as well as 15.4 % and 40.5 % in MgOPF and SPF compared to their respective raw forms. The total N of the biochars, adjustment of surface charges, cation exchange capacity, surface area, pore filling effects, and the formation of potential MgN precipitates on the modified-biochar surfaces regulated N leaching/retention. In addition, the modified biochar treatments reduced the hydrolysis of urea and stimulated some nitrate-reduction-related bacteria crucial for NO₃^- retention. Hence, unlike the raw biochar and MgOPF treatments, MgOBF, SBF, and SPF hold promise in mitigating inorganic-N losses from fertilized soils while improving the soil's chemical properties.

Phosphate removal from aqueous solution using calcium-rich biochar prepared by the pyrolysis of crab shells

Phosphorus is one of the main pollutants that cause water pollution, and phosphorus is a one-way cycle in the environment, and phosphorus resources will face exhaustion in the next 100 years. Therefore, the recovery and reuse of phosphorus resources have become very important. This article presents a study concerning the removal of phosphate from an aqueous solution by using a calcium-rich biochar prepared by pyrolysis of crab shells. The experimental results show that the optimal pyrolysis temperature of crab shells is 500 ℃, named CSB500, which is more conducive to the adsorption of phosphate. The process of phosphate adsorption conforms to the quasi-second-order kinetics and Freundlich model. On the other hand, the Langmuir isotherm model shows that when the reaction conditions are 25 ℃, 30 ℃, and 35 ℃, the maximum adsorption capacity of CSB500 for phosphate is 164.32 mg/g, 170.47 mg/g, and 209.35 mg/g, respectively. The characterization results show that the overall structure of CSB500 is good, the specific surface area is large, and the main component is calcium carbonate. The potential mechanisms of action in the process of phosphate adsorption may be electrostatic attraction, surface chemical precipitation, ligand exchange, and complexation.

Lead removal from aqueous solutions by olive mill wastes derived biochar: Batch experiments and geochemical modelling

In this study, lead removal from aqueous solutions using biochar derived from olive mill solid and liquid wastes has been investigated by applying batch experiments and geochemical modelling. The batch adsorption experiments included the assessment of several key parameters such as the contact time (kinetic), initial concentration (isotherm), pH, adsorbent dose, and the presence of competitive cations, whilst the geochemical modelling focused on the involved adsorption mechanisms using the PHREEQC code. The kinetic studies showed that lead adsorption is a relatively fast process, where intraparticle diffusion is the rate-limiting step. Biochar dose, solution pH and the presence of competitive ions significantly affected the Pb adsorption effectiveness by the biochar. Especially the higher Pb removal percentages were observed in mono-elemental solutions with high biochar dose at mildly acidic solution pH values. The maximum Pb adsorption capacity of biochar was estimated as 40.8 mg g^-1 which is higher than various biochars derived from sludge, lignocellulosic and animal biomasses. On the other hand, the geochemical modelling employing the PHREEQC code showed that ion exchange and Pb precipitation are the main reactions controlling its removal from aqueous solutions, whilst surface complexation is insignificant, mainly due to the low surface functional groups on the used biochar.

Removal of phosphorus in wastewater by sinusoidal alternating current coagulation: performance and mechanism

The effects of initial total phosphorus (TP) concentration, current density, conductivity and initial pH value on the removal rate of TP and energy consumption, as well as the behaviour and mechanism of phosphorus removal, were investigated by sinusoidal alternating current coagulation (SACC). The flocs produced by SACC were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy FTIR and X-ray photo electron spectroscopy. The thermodynamic and kinetic behaviours of phosphorus removal by iron sol adsorption were also studied in detail. In a self-made SACC reactor equipped with five sets of parallel iron electrodes spacing 10 mm, the removal rate of TP reached 90.9% for a pH 7.0 wastewater with 5 mg dm^-3 TP (κ = 800 μS cm^-1) after being treated for 60 min by applying 2.12 mA cm^-2 sinusoidal alternating current. Compared with direct current coagulation (DCC), SACC exhibits a higher removal efficiency of phosphorus due to the stronger adsorption of the produced flocs. It was found that the adsorption in the SACC process follows pseudo-second-order kinetic with the involvement of the intra-particle model. The adsorption of iron sol to phosphorus was an endothermic and spontaneous process, and its adsorption behaviour can be characterized with Langmuir and Redlich-Peterson isothermal adsorption models. SACC may be employed for the treatment of more complex wastewater combined with biological and/or electrochemical techniques.

Integrated electrocoagulation-flotation of microalgae to produce Mg-laden microalgal biochar for seeding struvite crystallization

Developing sustainable materials for recovering and recycling nutrients from wastewater is critically needed for nutrients such as phosphorus that have a diminishing supply. Struvite crystallization is emerging as a promising strategy for phosphorus recovery which can be enhanced with seeding through microalgal biochar. The main bottleneck of using microalgae is its high harvesting cost. In this study, an integrated electrocoagulation-flotation (ECF) process is used to recover and at the same time modify the algal surface with magnesium anode and inert carbon cathode. Harvesting efficiency of 98% was achieved with 40.78 mA cm⁻², 0.5 cm inter-electrode distance and energy consumption of 4.03 kWh kg⁻¹ in 15 min. The harvested microalgae were pyrolyzed to obtain a yield of 52.90% Mg-laden microalgal biochar. Simultaneously, surface impregnation of 28% magnesium was attained as confirmed by Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Phosphorus recovery and struvite yield of 93.70% and 2.66 g L⁻¹, respectively, were obtained from dosing 1.50 g L⁻¹ Mg-laden microalgal biochar. Comparison of physicochemical characteristics of residual supernatant after microalgal harvesting and struvite recovery showed that the combined use of both the residuals can serve as a sustainable growth medium for microalgae. The overall operating cost of the integrated process was found to be 2.48 USD kg⁻¹ with a total energy consumption of 10.76 kWh kg⁻¹, which was found to be lower than conventional harvesting unit processes such as centrifugation and filtration. This novel approach can help attaining a circular bioeconomy by encompassing nutrient recovery and waste management in an integrated process.

Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review

Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.

The impact of pristine and modified rice straw biochar on the emission of greenhouse gases from a red acidic soil

With the growing awareness of environmental impacts of land degradation, pressure is mounting to improve the health and productivity of degrading soils, which could be achieved through the use of raw and modified biochar materials. The primary objective of the current study was to investigate the efficiency of pristine and Mg-modified rice-straw biochar (RBC and MRBC) for the reduction of greenhouse gases (GHG) emissions and improvement of soil properties. A 90 days' incubation experiment was conducted using treatments which included control (CK), two RBC dosages (1% and 2.5%), and two MRBC doses (1% and 2.5%). Soil physico-chemical and biological properties were monitored to assess the effects due to the treatments. Results showed that both biochars improved soil physicochemical properties as the rate of biochar increased. The higher rates of biochar (RBC_2.5 and MRBC_2.5) particularly increased enzymatic activities (Catalase, Invertase and Urease) in comparison to the control. Data obtained for phospholipid fatty acid (PLFA) concentration indicated an increase in the Gram-negative bacteria (G-), actinomycetes and total PLFA with the increased biochar rate, while Gram-positive bacteria (G+) showed no changes to either level of biochar. As regards fungi concentration, it decreased with the biochar addition, whereas arbuscular mycorrhizal fungi (AMF) showed non-significant changes. The release of CO₂, CH₄ and N₂O showed a decreasing trend over the time. CO₂ cumulative emission decreased for MRBC₁ (5%) and MRBC_2.5 (9%) over the pristine biochar treatments. The cumulative N₂O emission decreased by 15-32% for RBC₁ and RBC_2.5 and by 22-33% for MRBC₁ and MRBC_2.5 as compared to the control, whereas CH₄ emission showed non-significant changes. Overall, the present study provides for the first-time data that could facilitate the correct use of Mg-modified rice biochar as a soil additive for the mitigation of greenhouse gas emission and improvement of soil properties.

Recent advancements on biochars enrichment with ammonium and nitrates from wastewaters: A critical review on benefits for environment and agriculture

During the last decade, biochars have been considered as attractive and eco-friendly materials with various applications including wastewater treatment, energy production and soil amendments. However, the important nitrogen losses during biochars production using the pyrolysis process have limited their potential use in agriculture as biofertilizer. Therefore, it seems necessary to enrich these biochars with nitrogen sources before their use in agricultural soils. This paper is the first comprehensive review on the assessment of biomass type and the biochars' properties effects on N recovery efficiency from aqueous solutions as well as its release and availability for plants when applying the N-enriched chars in soils. In particular, the N recovery efficiency by raw biochars versus the type of the raw feedstock is summarized. Then, correlations between the adsorption performance and the main physico-chemical properties are established. The main mechanisms involved during ammonium (NH₄-N) and nitrates (NO₃-N) recovery process are thoroughly discussed. A special attention is given to the assessment of the biochars physico-chemical modification impact on their N recovery capacities improvement. After that, the application of these N-enriched biochars in agriculture and their impacts on plants growth as well as methane and nitrous oxide greenhouse gas emissions reduction are also discussed. Finally, the main future development and challenges of biochars enrichment with N from wastewaters and their valorization as biofertilizers for plants growth and greenhouse gas (GHG) emissions reduction are provided. This systematic review is intended to promote the real application of biochars for nutrients recovery from wastewaters and their reuse as eco-friendly fertilizers.

Biochar application in biofiltration systems to remove nutrients, pathogens, and pharmaceutical and personal care products from wastewater

Although conventional on-site wastewater treatment systems (OWTSs) provide only primary treatment of domestic wastewater, removal of a limited level of nutrients (N, P), pathogens, and pharmaceuticals and personal care products (PPCPs) could be achieved by such a treatment process. Biochar has the capacity to remove various contaminants and has been widely used as an ideal soil amendment in agriculture due to its persistence, superior nutrient-retention properties, low cost, and ready availability. However, few applications on the use of biochar in onsite wastewater treatment have been explored. In this review, we systematically reviewed the applications of biochar in filtration-based OWTSs for nutrient (N, P) removal and recovery as well as pathogen and PPCP removal. Although adsorption was the main mechanism for P, pathogen, and PPCP removal, biochar can also serve as the growth media for enhanced biological degradation, improves available alkalinity, and increases water holding capacity in the OWTSs. The biochar source, surface modification methods, and preparation procedures (e.g., pyrolysis temperature change) have significant effects on contaminant removal performance in biochar-amended OWTSs. Specifically, contradictory results have been reported on the effect of pyrolysis temperature change on biochar removal performance (i.e., increased, decreased, or no change) of N, P, and PPCPs. Wastewater composition and environmental pH also play important roles in the removal of nutrients, pathogens, and PPCPs. Overall, biochar holds great potential to serve as an alternative filtration material or to be amended to the current OWTS to improve system performance in removing a variety of contaminants at low cost.

Dynamic Adsorption Characteristics of Phosphorus Using MBCQ

Biochar is a new type of adsorption material with excellent performance, but it has some problems, such as light texture, poor sedimentation, and difficult recovery, which limits its practical application. In this study, biochar microspheres (MBCQ) were prepared by the sol–gel method using powdery biochar from Hydrocotyle vulgaris as raw material and sodium alginate as a granular carrier. Experiments were performed to investigate the dynamic adsorption characteristics of phosphorus by MBCQ in the adsorption column and the influences of particle size, initial phosphorus concentration, flow rate, and column height on the breakthrough curve. The results showed that the static adsorption properties of different particles varied and that 3-millimeter particles were optimal. The breakthrough time positively correlated with column height and negatively correlated with initial phosphorus concentration, flow rate, and particle size. Flow velocity significantly impacted breakthrough time and length of mass transfer. The bed depth/service time model accurately predicted the relationship between breakthrough times and column heights. When ct/c0 = 0.6, the average relative deviation between predicted and measured values was the lowest. The Thomas model described the MBCQ adsorption process of Ph (R2 > 0.95), which indicated that diffusion in MBCQ adsorption was not a rate-limiting step.

Mitigation of greenhouse gas emissions from a red acidic soil by using magnesium-modified wheat straw biochar

To mitigate greenhouse gas (GHG) emissions, different strategies have been proposed, including application of dolomite, crop straw and biochar, thus contributing to cope with the increasing global warming affecting the planet. In the current study, pristine wheat straw biochar (WBC) and magnesium (MgCl₂.6H₂O) modified wheat straw biochar (MWBC) were used. Treatments included control (CK), two WBC dosages (1% and 2.5%), and two MWBC doses (1% and 2.5%). After 90 days of incubation, WBC and MWBC improved the soil physiochemical properties, being more pronounced with increasing rates of biochar. MWBC_2.5 significantly decreased microbial biomass carbon (MBC), while microbial biomass nitrogen (MBN) increased when both biochar materials (WBC₁ and MWBC₁) were applied at low rate. Compared to control soil, Urease and Alkaline phosphatase activities increased with the increasing rate of WBC and MWBC. The activities of dehydrogenase and β-glucosidase decreased with the WBC and MWBC application, compared to CK. The fluxes of all the three GHGs evaluated (CO₂, CH₄ and N₂O) decreased with time for both biochar amendments, while cumulative emission of CO₂ increased by 58% and 45% for WBC, and by 54% and 41% for MWBC, as compared to CK. The N₂O cumulative emissions decreased by 18 and 34% for WBC, and by 25 and 41% for MWBC, compared to CK, whereas cumulative methane emission showed non-significant differences among all treatments. These findings indicate that Mg-modified wheat straw biochar would be an appropriate management strategy aiding to reduce GHG emissions and improving the physiochemical properties of affected soils, and specifically of the red dry land soil investigated in the current work.

Efficient reclaiming phosphate from aqueous solution using waste limestone modified sludge biochar: Mechanism and application as soil amendments

A novel limestone-modified biochar derived from sewage sludge was prepared to reclaim phosphorus (P) from aqueous solution, and the potential application of P-laden biochar as soil amendments was also investigated. The limestone-modified biochar demonstrated excellent performance on phosphate recovery from aqueous solution in a wide range of pH (2.0-11.0), with maximum adsorption capacity of the biochar (Limestone/sludge mass ratio of 3:1) up to 231.28 mg P/g, which was 10.7 times that of the original sludge biochar. The adsorption was well described by the pseudo second-order model and Langmuir isotherm model. According to the adsorption thermodynamic parameters, the phosphate adsorption was spontaneous (ΔG⁰ < 0) and endothermic (ΔH⁰ > 0) so that increasing the temperature was beneficial to adsorption. Characterization analysis by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscope-energy dispersive spectrometer (SEM-EDS) proved that electrostatic attraction, surface complexation and brushite (CaHPO₄^.2H₂O) precipitation were the dominant mechanism. The P-laden biochar exhibited an excellent ability to be reused as a new slow-release P fertilizer for soil. Pot experiment results showed that the treatment of P-laden LB 3:1 (P content of 22.8%) addition (1 wt%) significantly promoted Indian Lettuce germination (increasing by 14.4%), plant height (increasing by 18.6%), and dry biomass (53.0%) compared with the control, though it underperformed compared to commercial fertilizer.

A novel glucose-based highly selective phosphate adsorbent

Industrial wastewater discharge leads to serious eutrophication of water bodies, but most of the adsorbents are difficult to selectively remove phosphorus and are difficult to use multiple times, therefore, developing an efficient and reusable material for removal phosphate is extremely necessary. In this work, a kind of highly selective phosphate adsorbent, microporous carbon material (MCM), based on glucose was synthesized by hydrothermal and activation method. The MCM were characterized by SEM, XPS, BET, element analysis, et al. The phosphate adsorption mechanism of MCM were investigated by batch adsorption experiment and model calculation. Results showed that MCM had a high adsorption capacity for phosphate in a wide range of pH (1.5-10). Langmuir model and pseudo-second-order kinetic revealed that the process was endothermic and involved both physical and chemical adsorption. The main phosphate adsorption mechanisms of MCM are electrostatic attraction, ion complexation, hydrogen bonding, and physical adsorption. The ions competition simulation experiment indicated that the MCM was highly selective for phosphate removal. Furthermore, the phosphate adsorption tests were carried out on five kinds of water, and the removal rates were all above 99.98%. The 20 regenerative cycles experiment revealed that the MCM had high reusability. Therefore, this kind of novel glucose-based highly selective phosphate adsorbent with multi-cycle phosphorus removal performance can improve the eutrophication of water. This study provides a new idea for phosphate removal and expands the application range of glucose-based carbon materials.

Engineered biochars for recovering phosphate and ammonium from wastewater: A review

Biochar has gained great scientific attention as a promising agent for agricultural and environmental applications. A variety of biochars with excellent properties such as high porosity, surface area and functional groups have been developed for nutrients recovery from wastewater. Compared to pristine biochar, engineered biochar with enlarged surface area and abundant functional groups has been prepared which shows a new type of carbon-based material with enhanced adsorption potential for nutrients in wastewater. To date, a few reviews have been specifically focused on several important aspects of engineered biochar, such as its application to recover phosphate and ammonium from wastewater and subsequent use as a slow-release fertilizer. In this work, novel modification/treatment methods including activation with acid/alkali, functionalization with amides, thiols and oxidizing agents, metal salt impregnation, loading with various minerals and carbon-based materials are reviewed for preparing engineered biochar with improved adsorption capacity. Various sources of biomass for producing biochars were estimated, and the intrinsic characteristics and potential of biochar products for simultaneous recovery/removal of phosphate and ammonium from wastewater were evaluated. Relevant interaction mechanisms of phosphate and ammonium adsorption on engineered biochars have been discussed in details. Finally, important future prospects as well as industrial/commercial-scale application of engineered biochars for phosphate and ammonium recovery from wastewater have been emphasized. We believe that this review will provide broad scientific opportunities for thorough understanding of applying engineered biochar as a low-cost and environmentally sustainable material for nutrients recovery from wastewater.

A comparative study on phosphate removal from water using Phragmites australis biochars loaded with different metal oxides

Metal oxide-loaded biochars are a promising material to remove phosphate from polluted water to ultra-low concentrations. To facilitate preparing the metal oxide-loaded biochar with the best phosphate adsorption performance, five biochars loaded with Al, Ca, Fe, La and Mg oxides, respectively (Al-BC, Ca-BC, Fe-BC, La-BC and Mg-BC) were produced using Phragmites australis pretreated with 0.1 mol AlCl3, CaCl2, FeCl3, LaCl3 and MgCl2, respectively, characterized, and phosphate adsorption kinetics and isotherms of the biochars were determined. The maximum phosphate adsorption capacities (Qm ) of the biochars ranked as Al-BC (219.87 mg g-1) > Mg-BC (112.45 mg g-1) > Ca-BC (81.46 mg g-1) > Fe-BC (46.61 mg g-1) > La-BC (38.93 mg g-1). The time to reach the adsorption equilibrium ranked as La-BC (1 h) < Ca-BC (12 h) < Mg-BC (24 h) = Fe-BC (24 h) Collapse

Key Words

• adsorption rate
• biochar
• maximum adsorption capacity
• metal oxides
• phosphate removal and recovery

Collapse

MESH Headings Collapse

Grants

• Major Science and Technology Program for Water Pollution Control and Treatment
• Research Initiation Fund for Young Teachers of Beijing Technology and Business University

Collapse

Affiliation(s)

Pengfei Wang National Engineering Laboratory for Lake Pollution Control and Ecological Restoration, State Environment Protection Key Laboratory for Lake Pollution Control, Chinese Research Academy of Environmental Sciences, Beijing 100012, People's Republic of China
Mengmeng Zhi School of Environmental and Municipal Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, People's Republic of China
Guannan Cui School of Ecology and Environment, Beijing Technology and Business University, Beijing 100048, People's Republic of China
Zhaosheng Chu National Engineering Laboratory for Lake Pollution Control and Ecological Restoration, State Environment Protection Key Laboratory for Lake Pollution Control, Chinese Research Academy of Environmental Sciences, Beijing 100012, People's Republic of China
Shuhang Wang National Engineering Laboratory for Lake Pollution Control and Ecological Restoration, State Environment Protection Key Laboratory for Lake Pollution Control, Chinese Research Academy of Environmental Sciences, Beijing 100012, People's Republic of China

Collapse

Enhanced removal of phosphate from aqueous solution using Mg/Fe modified biochar derived from excess activated sludge: removal mechanism and environmental risk

In this study, Mg-modified sludge biochar (MB) and Mg-Fe double oxides/sludge biochar composites (MFB) were synthesized for enhanced removal of phosphate from aqueous solution. The phosphate adsorption followed the Langmuir-Freundlich isotherm model, and the maximum capacity was 142.31 mg P/g and 35.41 mg P/g for MB and MFB, respectively. MB exhibited the higher adsorption capacity at pH 8-9 and performed well under the influences of coexisting anions and temperature (4-45 °C). Adsorption kinetics was well described by the pseudo-second-order kinetic model, indicating the chemical bonding between phosphate and adsorption sites. The adsorption capacity of phosphate decreased by < 15% after three successive recycles. Based on FTIR, XRD, and XPS analysis, the main mechanisms for phosphate removal by MB included electrostatic attraction, surface complexation, and precipitation. Hydroxides/oxides particles of Mg on the surface of MB with positive charge could adsorb HPO₄^2- and PO₄^3- to form surface complex and convert to MgHPO₄ and Mg₃(PO₄)₂. The released amounts of Fe, Cd, Cr, Pb, Cu, Zn, Sb, and As from MB and MFB were low and acceptable. However, the released amount of Mg was as high as 4.9 wt% for MB and 8.7 wt% for MFB at the pH corresponding maximum adsorption capacity, posing a risk of salt increase. The grass (Lolium perenne L.) germination and early growth with the addition of P-laden biochars as fertilizer are seriously inhibited due to the high alkalinity, particularly for MB. The environmental risk of P-laden biochars (with high alkalinity and salt content) as fertilizer should be emphasized in practical application.

Removal of ammonia nitrogen and phosphorus by biochar prepared from sludge residue after rusty scrap iron and reduced iron powder enhanced fermentation

The rusty scrap iron (RSI) or a mixture of rusty scrap iron and reduced iron powder (RSI-RIP) can be used as an exogenous additive to enhance the anaerobic fermentation of sewage sludge. In order to make rational use of the fermentation residue, the sludge after intensified fermentation was pyrolyzed to produce biochar in this study, which was used in the adsorption of ammonia and phosphorus from the anaerobic fermentation broth. The experimental results demonstrated that the pore structure of the sludge biochar was greatly improved after enhanced fermentation with RSI and RIP. Meanwhile, there was an increase in the proportion of metallic elements such as Ca, Fe and Mg. On the other hand, the RSI-RIP co-enhanced fermented biochar (ES600) prepared at 600 °C showed a higher adsorption capacity, which was comparable to the commercially activated carbon. Neutral or weakly alkaline environments were preferred during the adsorption process. At a suitable pH condition, the maximum removal efficiency of ammonia nitrogen (NH₄⁺-N) and total phosphorus (TP) on ES600 reached 91.3% and 98.6%, respectively. In addition, the saturated ES600 was regenerated by simple washing with ammonia-free water. After three cycles, the removal efficiency of NH₄⁺-N and TP remained at 71.3% and 83.2%, respectively. As a result, the biochar prepared from RSI-RIP enhanced fermented sludge can be used as a promising low-cost adsorbent.

Phosphorus Removal from Wastewater: The Potential Use of Biochar and the Key Controlling Factors

In recent years, a large volume of literature has been published regarding the removal of phosphorus (P) from wastewater. Various sorbing materials, such as metal oxides and hydroxides, carbonates and hydroxides of calcium (Ca) and magnesium (Mg), hydrotalcite, activated carbon, anion exchange resins, industrial solid wastes and organic solid wastes, have been suggested for P removal. Many of these sorbents are expensive and/or may cause some environmental problems. In contrast, biochar, as an economical and environmentally friendly sorbing material, has received much attention in recent years and has been used as a novel sorbent for the removal of different organic and inorganic pollutants. Biochar is a type of sustainable carbonaceous material that is produced from the thermal treatment of agricultural organic residues and other organic waste streams under oxygen free conditions. This paper reviews the potential use of biochar and the key controlling factors affecting P removal from wastewater. The ability of biochar to remove P from wastewater depends on its physical and chemical properties. Some of the most important physicochemical properties of biochar (structural characteristics, electrical conductivity (EC), mineral composition, pH, zeta potential, cation exchange capacity (CEC) and anion exchange capacity (AEC)) are affected by the feedstock type as well as temperature of pyrolysis and the P sorption capacity is highly dependent on these properties. The P removal is also affected by the water matrix chemistry, such as the presence of competing ions and bulk pH conditions. Finally, several recommendations for future research have been proposed to facilitate and enhance the environmental efficiency of biochar application.

Static and Dynamic Investigations on Leaching/Retention of Nutrients from Raw Poultry Manure Biochars and Amended Agricultural Soil

In this study, nutrients release/adsorption from/by raw poultry manure-derived biochar produced at a pyrolysis temperature of 600 °C (RPM-B) was assessed under static and dynamic conditions. Batch sequential leaching experiments of RPM-B for a total contact time of 10 days showed that both phosphorus and potassium were slowly released but with higher amounts compared to various other animal- and lignocellulosic-derived biochars. The cumulated released P and K amounts were assessed to 93.6 and 17.1 mg g−1, which represent about 95% and 43% of their original contents in the RPM-B, respectively. The column combined leaching/adsorption experiments showed that amending an alkaline sandy agricultural soil with two doses of RPM-B (at 5% and 8% w:w) resulted in an efficient retention of NO3-N and NH4-N, and on the contrary, important leached amounts of PO4-P, K+, Mg2+, and Ca2+ but with relatively slow kinetic release rates for a long period. Even after 40 days of dynamic leaching, these latter nutrients continued to be released with kinetic rates lower than 10 mg kg−1 d−1. Thus, compared to synthetic fertilizers, RPM-B valorization as organic amendment for poor semiarid soils could be considered as an attractive, eco-friendly, and sustainable waste recycling option.

Use of Lignite as a Low-Cost Material for Cadmium and Copper Removal from Aqueous Solutions: Assessment of Adsorption Characteristics and Exploration of Involved Mechanisms

Lignite, as an available and low-cost material, was tested for cadmium (Cd) and copper (Cu) removal from aqueous solutions under various static experimental conditions. Experimental results showed that the removal efficiency of both metals was improved by increasing their initial concentrations, adsorbent dosage and aqueous pH values. The adsorption kinetic was very rapid for Cd since about 78% of the totally adsorbed amounts were removed after a contact time of only 1 min. For Cd and Cu, the kinetic and isothermal data were well fitted with pseudo-second order and Freundlich models, respectively, which suggests that Cd/Cu removal by lignite occurs heterogeneously on multilayers surfaces. The maximum Langmuir’s adsorption capacities of Cd and Cu were assessed to 38.0 and 21.4 mg g−1 and are relatively important compared to some other lignites and raw natural materials. Results of proximate, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), Fourier transform infrared spectroscopy (FTIR) and X-Ray diffraction (XRD) showed that the removal of these metals occurs most likely through a combination of cation exchange and complexation with specific functional groups. The relatively high adsorption capacity of the used lignite promotes its future use as a low cost material for Cd and Cu removal from effluents, and possibly for other heavy metals or groups of pollutants.

Benign zinc oxide betaine-modified biochar nanocomposites for phosphate removal from aqueous solutions

Phosphate is one of the most costly and complex environmental pollutants that leads to eutrophication, which decreases water quality and access to clean water. Among different adsorbents, biochar is one of the promising adsorbents for phosphate removal as well as heavy metal removal from an aqueous solution. In this study, biochar was impregnated with nano zinc oxide in the presence of glycine betaine. The Zinc Oxide Betaine-Modified Biochar Nanocomposites (ZnOBBNC) proved to be an excellent adsorbent for the removal of phosphate, exhibiting a maximum adsorption capacity of phosphate (265.5 mg. g^-1) and fast adsorption kinetics (~100% removal at 15 min at 10 mg. L^-1 phosphate and 3 g. L^-1 nanocomposite dosage) in phosphate solution. The synthesis of these benign ZnOBBNC involves a process that is eco-friendly and economically feasible. From material characterization, we found that the ZnOBBNC has ~20-30 nm particle size, high surface area (100.01 m². g^-1), microporous (25.79 Å) structures, and 7.64% zinc content. The influence of pH (2-10), coexisting anions (Cl^-, CO₃^2-, NO₃^- and SO₄^3-), initial phosphate concentration (10-500 mg. L^-1), and ZnOBBNC dosage (0.5-5 g. L^-1) were investigated in batch experiments. From the adsorption isotherms data, the adsorption of phosphate using ZnOBBNC followed Langmuir isotherm (R² = 0.9616), confirming the mono-layered adsorption mechanism. The kinetic studies showed that the phosphate adsorption using ZnOBBNC followed the pseudo-second-order model (R² = 1.0000), confirming the chemisorption adsorption mechanism with inner-sphere complexion. Our results demonstrated ZnOBBNC as a suitable, competitive candidate for phosphate removal from both mock lab-prepared and real field-collected wastewater samples when compared to commercial nanocomposites.

Phosphorus and ammonium removal characteristics from aqueous solutions by a newly isolated plant growth-promoting bacterium

An indigenous plant growth-promoting bacterium isolated from Peganum Harmala rhizosphere in the arid ecosystem was found to solubilize and accumulate phosphates. This isolate was identified as Pseudomonas sp. (PHR6) by partial 16S rRNA gene sequence analysis. Controlled batch experiments on nutrients removal by this isolate in mineral medium showed relatively high efficiencies after 24 h of aerobic incubation with average values of 117.59 and 335.38 mg gVSS^-1 for phosphorus (P-PO₄) and nitrogen (N-NH₄), respectively. Furthermore, the strain performed heterotrophic nitrification ranging from 48.81% to 84.24% of the total removed nitrogen. On the other hand, the experimental results showed that a short idle period (24 h) significantly enhanced P accumulation (up to 95%) and N assimilation (up to 50%) of the total removed amounts. However, long idle period (20 days) revealed firstly aerobic phosphorous release phase succeeded by another removal one within 24 h of incubation. Overall, the idle treatment enhances P removal efficiency from the mineral liquid medium without significant effects on N-NH₄ removal performance. The isolated strain showed also significant nutrient removal ability from synthetic wastewater providing an accumulated fraction of 98% from the total removed phosphorus amount. This study highlights the potential contribution of the selected rhizobacterium PHR6 to both environmental nutrient recycling and pollution control especially regarding phosphorus.

Performance investigation of struvite high-efficiency precipitation from wastewater using silicon-doped magnesium oxide

In this study, a new adsorbent of silicon-doped magnesium oxide (SMG) was developed for the recovery of nutrients from wastewater. The adsorption conditions including adsorbent dosage, initial solution pH, contact time, coexisting substances, N/P molar ratios, and reaction temperature were investigated. Analysis of field emission scanning electron microscopy-energy dispersive spectrometer (FESEM-DES) and specific surface areas (BET) showed that SMG was a mesoporous adsorbent with S_BET of 108.31 m²/g. The recycled sediment (RS) was identified as almost pure struvite via X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). The recovery efficiencies of SMG reached 43.25% of ammonia nitrogen and 97.31% of phosphate at dosage of 0.3 g/L, initial solution pH of 7.0, contact time of 20 min, and temperature of 298 K. Under the optimal reaction conditions, the maximum adsorption capacities of SMG were 170.93 mg/g of ammonia nitrogen and 420.89 mg/g of phosphate at N/P molar ratio of 1.5:1. Coexisting humic acid (HA), calcium (Ca²⁺), acetic acid (AA), and ferric ions (Fe³⁺) in nutrient solution hindered the struvite ordered precipitation. The adsorption process followed pseudo-second-order and Elovich kinetic models and was well described by both the Langmuir and Freundlich isotherms at room temperature. All results indicated that the most likely mechanism of nutrients recovery from wastewater was chemical precipitation and proved that SMG was a high-efficiency adsorption material in a wide pH range of 3.0-9.0 for simultaneous recovery of nutrients from wastewater.

Enhanced phosphate removal from aqueous solution using resourceable nano-CaO2/BC composite: Behaviors and mechanisms

The situation of eutrophication and shortage of phosphorus resources have triggered the development of new methods for the removal and recovery of phosphorus. In this study, a novel and highly efficient composite (nano-CaO₂/BC) was fabricated by using the porous biochar (BC) to load calcium peroxide (CaO₂) nanoparticles. The developed nano-CaO₂/BC was applied to remove and recover phosphate from P-contained sewage. The phosphate removal performance of the composite was examined using the bulk solutions with different pH values, coexisting anions, composite dosages, and initial phosphate concentrations. The phosphate adsorption was a typical chemisorption process that agreed well with the pseudo-second-order kinetic model. Isotherm studies showed that the adsorption matched well with Langmuir-Freundlich and the maximum adsorption capacity at equilibrium was 213.22 ± 13.57 mg g^-1 (298 K). The characterization results demonstrated that the predominant adsorption mechanism was precipitation. Moreover, the composite had good reusability. The seedling growth test confirmed that the P-laden composite can be mixed with soil to promote the growth of seedlings. Therefore, the method of "cycle back to soil" of used composite provided a way of resource utilization and waste disposal.

Synthesis optimisation and characterisation of chitosan-calcite adsorbent from fishery-food waste for phosphorus removal

Here, Box-Behnken design (BBD) approaches were utilised to optimise synthesis methodology for the chitosan-calcite rich adsorbent (CCM) made from fishery-food waste material (crab carapace), using low-temperature activation and potassium hydroxide (KOH). The effect of activation temperature, activation time and impregnation ratio was studied. The final adsorbent material was evaluated for its phosphorus (P) removal efficiency from liquid phase. Results showed that impregnation ratio was the most significant individual factor as this acted to increase surface deacetylation of the chitin (to chitosan) and increased the number of amine groups (-NH₂) in the chitosan chain. P removal efficiency approached 75.89% (at initial P concentration of 20 mg/L) under optimised experimental conditions, i.e. where the impregnation ratio for KOH:carapace (g/g) was 1:1, the activation temperature was 105 °C and the activation time was 150 min. Predicted responses were in good agreement with the experimental data. Additionally, the pristine and CCM material were further analysed using scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX), Brunauer-Emmett-Teller technique (BET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermal gravimetric analysis (TGA). Characterisation showed enhancements in surface chemistry (introducing positively charged amine groups), textural properties and thermal stability of the CCM.

Removal of phosphate from aqueous solution using MgO-modified magnetic biochar derived from anaerobic digestion residue

A novel MgO-modified magnetic biochar (MgO@MBC) was made by chemical co-precipitation of Mg²⁺/Fe³⁺ on anaerobic digestion residue (ADR) and subsequently pyrolyzing at different temperatures. MgO@MBC was used for phosphate recovery from aqueous solution. The physicochemical properties of MgO@MBC were comprehensively investigated using TEM-EDS, FT-IR, XRD, VSM, N₂ adsorption-desorption and TGA. Results showed that MgO/γ-Fe₂O₃ nanoparticles were successfully deposited onto the surface of BC. The effects of reaction temperature, initial solution pH, MgO@MBC dosage, coexisting anions and phosphate concentration on the removal of phosphate by MgO@MBC were researched. Additionally, the adsorption process of phosphate onto MgO@MBC was well described by the pseudo second-order and pseudo first-order models, which indicated a chemisorption and physisorption process. Besides, the maximum adsorption capacity of MgO@MBC for phosphate by the Langmuir model were 149.25 mg/g at 25 °C. Moreover, the thermodynamic study suggested that the adsorption of phosphate onto MgO@MBC was a spontaneous and endothermic process. The adsorption mechanisms including physical absorption, surface electrostatic attraction, surface complexation and precipitation were revealed. It could be concluded that MgO@MBC exhibited high removal efficiency of phosphate and excellent magnetic property for the recovery. MgO@MBC could be utilized as a magnetically recoverable adsorbent to realize phosphate recovery and MgO@MBC after the adsorpion of phosphate could be applied in agricultural production as a fertilizer.

Pyrolysis Process as a Sustainable Management Option of Poultry Manure: Characterization of the Derived Biochars and Assessment of their Nutrient Release Capacities

Raw poultry manure (RPM) and its derived biochars at temperatures of 400 (B400) and 600 °C (B600) were physico-chemically characterized, and their ability to release nutrients was assessed under static conditions. The experimental results showed that RPM pyrolysis operation significantly affects its morphology, surface charges, and area, as well as its functional groups contents, which in turn influences its nutrient release ability. The batch experiments indicated that nutrient release from the RPM as well as biochars attains a pseudo-equilibrium state after a contact time of about 48 h. RPM pyrolysis increased phosphorus stability in residual biochars and, in contrast, transformed potassium to a more leachable form. For instance, at this contact time, P- and K-released amounts passed from 5.1 and 25.6 mg g−1 for RPM to only 3.8 and more than 43.3 mg g−1 for B400, respectively. On the other hand, six successive leaching batch experiments with a duration of 48 h each showed that P and K release from the produced biochars was a very slow process since negligible amounts continued to be released even after a total duration of 12 days. All these results suggest that RPM-derived biochars have specific physico-chemical characteristics allowing them to be used in agriculture as low-cost and slow-release fertilizers.

Removal of phosphate from aqueous solution by dolomite-modified biochar derived from urban dewatered sewage sludge

Excessive phosphorus emission is mainly responsible for eutrophication. Recently, the application of modified biochars for phosphorus removal from aqueous solution has set off a boom. In the present study, a novel modified biochar was developed, from urban sewage sludge by decorating dolomite according to the dried mass ratio of sludge to dolomite being 1:1. The experimental results showed that the adsorption process preferred lower pH, with the biochar under investigation exhibiting high phosphate removal efficiency of 96.8% at the adsorbent dosage of 2.6 g/L and the initial solution pH of 4.5. Moreover, for the tested biochar, the phosphate removal kinetics data at different temperatures were all well fitted by the pseudo-second-order model, thereby establishing the endothermic nature of the adsorption process. Furthermore, the phosphate removal data upon being well fitted by the Langmuir model showed the maximal removal capacity of 29.18 mg/g. Further, for determining the mechanism involved in the removal process, SEM, XRD, and FTIR analysis were carried out, which in turn revealed that the phosphate combines with the biochar via electrostatic attraction, thereby forming a new outer-sphere surface complex and inner-sphere surface complex in the acidic condition. Additionally, the calcium and magnesium precipitation of phosphate may contribute to the removal of phosphate in the adsorption process. The presence of SO₄^2-, HCO₃^-, and C₅H₇O₅COO^- could negatively affect the removal of phosphate, while CH₃COO^- had a positive effect on the adsorption of phosphate on the biochar. Thus, an economic assessment showed that the proposed adsorption process had a commercial attraction.

Phenol adsorption on biochar prepared from the pine fruit shells: Equilibrium, kinetic and thermodynamics studies

Biochar samples were prepared from pine fruit shell (PFS) biomass using slow pyrolysis for 1 h at three different temperatures (350, 450 and 550°C). Batch experiments were carried out for the biosorption of phenol onto these biochars. The effect of biosorption experimental parameters such as adsorbent dosage, ionic strength, initial solution pH, contact time and temperatures has been investigated. Experimental equilibrium data were fitted to Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherms by non-linear regression method. The experimental kinetic data were also fitted to Lagergren pseudo-first order, pseudo-second order, Elovich and intraparticle diffusion models by non-linear regression method. Determination coefficient (R²), chi-squared (χ²) and error function (F_error%) were used to determine the optimum isotherm and kinetic by non-linear regression method. Kinetics results were best described by pseudo-second order model for phenol onto three biochars. Thermodynamic parameters were estimated and implied that the adsorption process is spontaneous and exothermic in nature.