Kinetic and thermodynamic studies on the adsorption of heavy metals from aqueous solution by melanin nanopigment obtained from marine source: Pseudomonas stutzeri

Enhancing fluoride ion removal from aqueous solutions and glass manufacturing wastewater using modified orange peel biochar magnetic composite with MIL-53

In this study, we developed new adsorbents derived from orange peel biochar (BCOP) and enhanced them with CoFe2O4 magnetic nanoparticles (BCOP/CoFe2O4) and MIL-53(Al) (BCOP/CoFe2O4/MIL-53(Al)). These adsorbents were utilized to remove fluoride (FL) ions from aqueous solutions. We analyzed the properties of these adsorbents using a range of techniques, including FTIR, XRD, SEM, EDX-Map, VSM, Raman spectroscopy, and BET. Our findings indicate that the components interact effectively with one another. Specifically, the BCOP/CoFe2O4/MIL-53(Al) sample exhibited a specific surface area of 196.430 m2/g and a magnetic saturation value of 9.704 emu/g. The maximum FL ion adsorption capacities for BCOP, BCOP/CoFe2O4, and BCOP/CoFe2O4/MIL-53(Al) were 7.618, 16.330, and 37.320 mg/g, respectively, indicating that the modifications significantly enhanced the adsorption capacity. The optimum fluoride ion removal rates using BCOP, BCOP/CoFe2O4, and BCOP/CoFe2O4/MIL-53(Al) were 97.88%, 98.23%, and 99.06%, respectively, at adsorbent doses of 2.5, 1.5, and 0.8 g/L, contact times of 90, 70, and 50 min, pH 4, temperature 50 °C, and a FL concentration of 10 mg/L. Thermodynamic studies revealed that the adsorption process was spontaneous and endothermic, with increased randomness between the adsorbent and fluoride ions. Kinetic analyses showed that fluoride ion adsorption by BCOP/CoFe2O4/MIL-53(Al) followed a pseudo-second-order (PSO) model, while BCOP and BCOP/CoFe2O4 followed a pseudo-first-order (PFO) model. Additionally, the equilibrium data for fluoride ion adsorption on BCOP/CoFe2O4/MIL-53(Al) adhered to the Freundlich model, whereas the other samples conformed to the Langmuir model. The study evaluates the effectiveness of BCOP, BCOP/CoFe2O4, and BCOP/CoFe2O4/MIL-53(Al) in removing FL ions from glass manufacturing wastewater, highlighting the superior performance of the magnetic composite due to its enhanced surface area and functional groups. Notably, the adsorbents demonstrated good regenerative capabilities, maintaining high performance over multiple adsorption cycles.

Marine Pseudomonas: diving into the waves of blue biotechnology

From marine to terrestrial environments, Pseudomonas spp. exhibit a remarkable ability not only to adapt but also thrive even amidst adverse conditions. This fact turns Pseudomonas spp. into one of the most prominent candidates for novel biotechnological solutions. Even though terrestrial isolates have been extensively studied, there is still an almost untapped source to be explored in marine Pseudomonas. Harnessing such strains offers an opportunity to discover novel bioactive compounds that could address current global challenges in healthcare and sustainable development. Therefore, this minireview aimed to provide an overview of the main recent discoveries regarding antimicrobials, antifouling, enzymes, pigments, and bioremediation strategies derived from marine isolates of Pseudomonas spp. Future research perspectives will also be discussed to foster forthcoming endeavors to explore the marine counterparts of such a prolific bacterial genus.

Adsorption characteristics and mechanism of novel ink melanin composite modified chitosan for Cd(II) in water

In this study, chitosan (CS), carboxymethyl chitosan (CMCS), and chitosan quaternary ammonium salt (HACC) were successfully loaded with ink melanin (ME) as efficient adsorbents for Cd(II) removal. The results of batch adsorption experiments and structural characterization showed that the modified CS loaded with ME improved the adsorption capacity of the composites for Cd(II). The pseudo-second-order kinetic and Langmuir equations were better suited to describe the batch adsorption experiments. The adsorption of Cd(II) was chemisorption with desirable adsorption effect when the concentration of the three composites was 0.5 mg/mL and the pH value was neutral. Among them, HACC-ME demonstrated remarkable Cd(II) adsorption performance (107.18 mg/g) and sustained an 85 % efficiency in Cd(II) removal over five adsorption-desorption cycles. Ion exchange, complexation, electrostatic attraction, and hydrophobic interaction were the primary mechanisms for Cd(II) removal. Overall, HACC-ME could be employed as a low-cost and highly efficient new natural adsorbent material for the removal of Cd(II) ions from wastewater. These findings illuminate pathways for the development of efficient and novel natural adsorbent materials for environmental cleanup purposes.

Fungal Peptidomelanin: A Novel Biopolymer for the Chelation of Heavy Metals

Melanin is an amorphous, highly heterogeneous polymer found across all kingdoms of life. Although the properties of melanin can greatly vary, most forms are insoluble and strongly absorb light, appearing dark brown to black. Here, we describe a water-soluble form of melanin (peptidomelanin) secreted by the spores of Aspergillus niger (strain: melanoliber) during germination. Peptidomelanin is composed of an insoluble L-DOPA core polymer that is solubilized via short, copolymerized heterogeneous peptide chains forming a "corona" with a mean amino acid length of 2.6 ± 2.3. Based on in vitro experiments, we propose a biochemical copolymerization mechanism involving the hydroxylation of tyrosynylated peptides. Peptidomelanin is capable of chelating heavy metals such as lead, mercury, and uranium (as uranyl) in large quantities. Preliminary data indicates that peptidomelanin may have applications for the remediation of heavy metals in situ, including in agricultural settings.

Removal of Heavy Metals by Pseudomonas sp. - Model Fitting and Interpretation

Industrial and urban modernization processes generate significant amounts of heavy metal wastewater, which brings great harm to human production and health. The biotechnology developed in recent years has gained increasing attention in the field of wastewater treatment due to its repeatable regeneration and lack of secondary pollutants. Pseudomonas, being among the several bacterial biosorbents, possesses notable benefits in the removal of heavy metals. These advantages encompass its extensive adsorption capacity, broad adaptability, capacity for biotransformation, potential for genetic engineering transformation, cost-effectiveness, and environmentally sustainable nature. The process of bacterial adsorption is a complex phenomenon involving several physical and chemical processes, including adsorption, ion exchange, and surface and contact phenomena. A comprehensive investigation of parameters is necessary in order to develop a mathematical model that effectively measures metal ion recovery and process performance. The aim of this study was to explore the latest advancements in high-tolerance Pseudomonas isolated from natural environments and evaluate its potential as a biological adsorbent. The study investigated the adsorption process of this bacterium, examining key factors such as strain type, contact time, initial metal concentration, and pH that influenced its effectiveness. By utilizing dynamic mathematical models, the research summarized the biosorption process, including adsorption kinetics, equilibrium, and thermodynamics. The findings indicated that Pseudomonas can effectively purify water contaminated with heavy metals and future research will aim to enhance its adsorption performance and expand its application scope for broader environmental purification purposes.

Novel benzothiazole-pyrazoline-styrene hybrid for ultrasensitive detection of Hg(II) ions: Synthesis and chemosensor evaluation

Water pollution has become a serious issue, and mercury(II) ion (Hg(II)) is highly toxic even at low concentrations. Therefore, Hg(II) concentration should be strictly monitored. This study evaluated pyrazoline compounds as fluorescence chemosensor agents for Hg(II) detection. These compounds were prepared from vanillin via etherification, Claisen-Schmidt, and cyclocondensation reactions, to yield benzothiazole-pyrazoline-styrene hybrid compounds. The hybrid compound without styrene was successfully synthesized in 97.70% yield with limit of detection (LoD) and limit of quantification (LoQ) values of 323.5 and 1078 μM, respectively. Conversely, the hybrid compound was produced in 97.29% yield with the LoD and LoQ values of 8.94 and 29.79 nM, respectively. Further spectroscopic investigations revealed that Hg(II) ions can either chelate with three nitrogen of pyridine, pyrazoline, and benzothiazole structures or two oxygen of vanillin and styrene. Furthermore, the hybrid compound was successfully applied in the direct quantification of Hg(II) ions in tap and underground water samples with a validity of 91.63% and 86.08%, respectively, compared with mercury analyzer measurement. The regeneration of pyrazoline was also easily achieved via the addition of an ethylenediaminetetraacetic acid solution. These findings show the promising application of the benzothiazole-pyrazoline-styrene hybrid compound for Hg(II) monitoring in real environmental samples.

Characterization of melanin from Exophiala mesophila with the prospect of potential biotechnological applications

Introducion

Fungal melanin is an underexplored natural biomaterial of great biotechnological interest in different areas. This study investigated the physical, chemical, electrochemical, and metal-binding properties of melanin extracted from the metallotolerant black fungus Exophiala mesophila strain IRTA-M2-F10.

Materials and methods

Specific inhibitory studies with tricyclazole and biochemical profiling of whole cells by synchrotron radiation-based Fourier-transform infrared spectral microscopy (SR-FTIRM) were performed. An optimized extraction protocol was implemented, and purified fungal melanin was characterized using an array of spectrophotometric techniques (UV-Vis, FTIR, and EPR) and by cyclic voltammetry (CV) experiments. The metal-binding capacity of melanin extracts was also assessed by using Cr(VI) as a model heavy metal.

Results

Inhibitory studies indicated that 1,8-dihydroxynaphthalene may be the main precursor molecule of E. mesophila melanin (DHN-melanin). The biochemical characterization of fungal melanin extracts were benchmarked against those from two melanins comprising the precursor molecule L-3,4-dihydroxiphenylalanine (DOPA-melanin): extracts from the ink of the cephalopod Sepia officinalis and DOPA-melanin synthesized in the laboratory. The CV results of melanin extracts incubated with and without cell suspensions of the electroconductive bacterium Geobacter sulfurreducens were indicative of novel semiquinone/hydroquinone redox transformations specific for each melanin type. These interactions may play an important role in cation exchange for the adsorption of metals and in microbial interspecies electron transfer processes.

Discussion

The obtained results provided further evidence for the DHN-nature of E. mesophila melanin. The FTIR profiling of melanin extracts exposed to Cr(VI), compared to unexposed melanin, resulted in useful information on the distinct surface-binding properties of fungal melanin. The parameters of the Langmuir and Freundlicht isotherms for the adsorption of Cr(VI) were determined and compared to bibliographic data. Altogether, the inherent properties of fungal melanin suggest its promising potential as a biomaterial for environmental applications.

Discussion on the thermodynamic calculation and adsorption spontaneity re Ofudje et al. (2023)

Accurate calculations and precise results are very important for the dissemination of scientific knowledge, whereas the errors of calculation will diminish the academic value of the paper. This discussion focuses on the calculation of thermodynamics and the determination of the spontaneity of adsorption processes in the paper of Ofudje et al. (2023). Ofudje et al. found that the apatite synthesized by chemical method (CHAp) has excellent adsorption properties for cadmium ions, which is an important contribution to the remediation of cadmium pollution. However, the calculation results of standard Gibbs free energy change (ΔGo), standard enthalpy change (ΔHo) and standard entropy change (ΔSo) of the adsorption of Cd2+ onto CHAp surface need to be corrected due to an incorrect calculation. Firstly, the partition coefficient (KD) with a dimension cannot be used for thermodynamic calculation. Secondly, the adsorbent mass (m) described by Ofudje et al. in different Sections is inconsistent, leading to incorrect results of Ko and ΔGo. When the appropriate value of the adsorbent mass is selected and the partition coefficient is converted to the standard adsorption equilibrium constant Ko, the calculated ΔGo is less than zero, which means that the adsorption is spontaneous. This discussion provides the correct calculation method of standard adsorption equilibrium constants and thermodynamic parameters, which can improve the reader's judgment and understanding of adsorption spontaneity.

Adsorption characteristics of nickel (II) from aqueous solutions by Zeolite Scony Mobile-5 (ZSM-5) incorporated in sodium alginate beads

Nickel, a prevalent metal in the ecosystem, is released into the environment through various anthropogenic activities, leading to adverse effects. This research explored utilizing zeolite scony mobile-5 (ZSM-5) nanoparticles encapsulated in sodium alginate (SA) for nickel (II) removal from aqueous solutions. The adsorption characteristics of SA/ZSM-5 were examined concerning contact duration, initial metal ion concentration, pH level, temperature, and sorbent dosage. The findings revealed that a rising pH reduced Ni (II) uptake by the sorbent while increasing the Ni (II) concentration from 25 to 100 mg L-1 led to a decrease in removal percentage from 91 to 80% under optimal conditions. Furthermore, as sorbent dosage increased from 4 to 16 g L-1, uptake capacity declined from 9.972 to 1.55 mg g-1. Concurrently, SA/ZSM-5 beads' Ni (II) sorption capacity decreased from 96.12 to 59.14% with a temperature increase ranging from 25 to 55 °C. The Ni (II) sorption data on SA/ZSM-5 beads are aptly represented by Langmuir and Freundlich equilibrium isotherm models. Moreover, a second-order kinetic model characterizes the adsorption kinetics of Ni (II) on the SA/ZSM-5 beads. A negative free energy change (ΔG°) demonstrates that the process is both viable and spontaneous. The negative enthalpy values indicate an exothermic nature at the solid-liquid interface while negative entropy values suggest a decrease in randomness. In conclusion, this novel adsorbent exhibits promise for removing nickel from aqueous solutions and could potentially be employed in small-scale industries under similar conditions.

Exploring the Potential of Water-Soluble Squid Ink Melanin: Stability, Free Radical Scavenging, and Cd2+ Adsorption Abilities

Squid ink melanin can be efficiently extracted from the byproduct ink sac generated during squid processing. As a natural food colorant, it possesses inherent antioxidant properties and the capability to adsorb heavy metals. This study aims to investigate the solubility of water-soluble squid ink melanin (WSSM) obtained from the ink sac, as well as its stability under various conditions including temperature, pH, salt, sugar, potassium sorbate, metal ions, sodium benzoate, sodium sulfite (reducing agent), and hydrogen peroxide (oxidizing agent). Moreover, it explores the scavenging effects of WSSM on free radicals and cadmium ions. The findings suggest that WSSM's stability is insignificantly affected by high temperature, sucrose, and salt. However, acidity, sodium benzoate, potassium sorbate, sodium sulfite (Na2SO3), and hydrogen peroxide (H2O2) significantly influence its stability. Most metal ions do not impact the stability of WSSM, except for Fe2+, Fe3+, Al3+, and Cu2+, which result in the precipitation of WSSM. Additionally, WSSM exhibits remarkable antioxidant activity with IC50 values of 0.91, 0.56, and 0.52 mg/mL for scavenging superoxide anion radicals (O2-·), hydroxyl radicals (·OH), and DPPH radicals, respectively. It also demonstrates the ability to adsorb the heavy metal Cd2+, with the adsorption rate gradually increasing with a higher temperature and larger amounts of WSSM added. Infrared spectroscopy analysis reveals the weakening of characteristic peaks (-COOH and -OH) during the process of Cd2+ adsorption by WSSM, while SEM confirms surface roughening and structural damage after Cd2+ adsorption. This study provides valuable insights for the utilization of squid melanin products as natural antioxidants and heavy metal adsorbents in the food industry.

A Comparative Study of Cr(VI) Sorption by Aureobasidium pullulans AKW Biomass and Its Extracellular Melanin: Complementary Modeling with Equilibrium Isotherms, Kinetic Studies, and Decision Tree Modeling

Melanin as a natural polymer is found in all living organisms, and plays an important role in protecting the body from harmful UV rays from the sun. The efficiency of fungal biomass (Aureobasidium pullulans) and its extracellular melanin as Cr(VI) biosorbents was comparatively considered. The efficiency of Cr(VI) biosorption by the two sorbents used was augmented up to 240 min. The maximum sorption capacities were 485.747 (fungus biomass) and 595.974 (melanin) mg/g. The practical data were merely fitted to both Langmuir and Freundlich isotherms. The kinetics of the biosorption process obeyed the pseudo-first-order. Melanin was superior in Cr(VI) sorption than fungal biomass. Furthermore, four independent variables (contact time, initial concentration of Cr(VI), biosorbent dosage, and pH,) were modeled by the two decision trees (DTs). Conversely, to equilibrium isotherms and kinetic studies, DT of fungal biomass had lower errors compared to DT of melanin. Lately, the DTs improved the efficacy of the Cr(VI) removal process, thus introducing complementary and alternative solutions to equilibrium isotherms and kinetic studies. The Cr(VI) biosorption onto the biosorbents was confirmed and elucidated through FTIR, SEM, and EDX investigations. Conclusively, this is the first report study attaining the biosorption of Cr(VI) by biomass of A. pullulans and its extracellular melanin among equilibrium isotherms, kinetic study, and algorithmic decision tree modeling.

Copper biosorption by Bacillus pumilus OQ931870 and Bacillus subtilis OQ931871 isolated from Wadi Nakheil, Red Sea, Egypt

BACKGROUND

Despite being necessary, copper is a toxic heavy metal that, at high concentrations, harms the life system. The parameters that affect the bioreduction and biosorption of copper are highly copper-resistant bacteria.

RESULTS

In this work, the ability of the bacterial biomass, isolated from black shale, Wadi Nakheil, Red Sea, Egypt, for Cu2+ attachment, was investigated. Two Cu2+ resistance Bacillus species were isolated; Bacillus pumilus OQ931870 and Bacillus subtilis OQ931871. The most tolerant bacterial isolate to Cu2+ was B. pumilus. Different factors on Cu2+ biosorption were analyzed to estimate the maximum conditions for Cu biosorption. The qmax for Cu2+ by B. pumilus and B. subtilis determined from the Langmuir adsorption isotherm was 11.876 and 19.88 mg. g-1, respectively. According to r2, the biosorption equilibrium isotherms close-fitting with Langmuir and Freundlich model isotherm. Temkin isotherm fitted better to the equilibrium data of B. pumilus and B. subtilis adsorption. Additionally, the Dubinin-Radushkevich (D-R) isotherm suggested that adsorption mechanism of Cu2+ is predominately physisorption.

CONCLUSION

Therefore, the present work indicated that the biomass of two bacterial strains is an effective adsorbent for Cu2+ removal from aqueous solutions.

Characterization and Biological Activities of Melanin from the Medicinal Fungi Ophiocordyceps sinensis

Melanin is a complex natural pigment that is widely present in fungi. The mushroom Ophiocordyceps sinensis has a variety of pharmacological effects. The active substances of O. sinensis have been extensively studied, but few studies have focused on the O. sinensis melanin. In this study, the production of melanin was increased by adding light or oxidative stress, namely, reactive oxygen species (ROS) or reactive nitrogen species (RNS), during liquid fermentation. Subsequently, the structure of the purified melanin was characterized using elemental analysis, ultraviolet-visible absorption spectrum, Fourier transform infrared (FTIR), electron paramagnetic resonance (EPR), and pyrolysis gas chromatography and mass spectrometry (Py-GCMS). Studies have shown that O. sinensis melanin is composed of C (50.59), H (6.18), O (33.90), N (8.19), and S (1.20), with maximum absorbance at 237 nm and typical melanin structures such as benzene, indole, and pyrrole. Additionally, the various biological activities of O. sinensis melanin have been discovered; it can chelate heavy metals and shows a strong ultraviolet-blocking ability. Moreover, O. sinensis melanin can reduce the levels of intracellular reactive oxygen species and counteract the oxidative damage of H₂O₂ to cells. These results can help us to develop applications of O. sinensis melanin in radiation resistance, heavy metal pollution remediation, and antioxidant use.

Production of single-component cellulose-based hydrogel and its utilization as adsorbent for aqueous contaminants

The growing concern for the environment has resulted in renewed interest in bio-based resources. This study aims to produce a hydrogel adsorbent from cellulose and examine its adsorption performance. In pursuit of this goal, we report a simple one-pot synthesis of cellulose acetate sulfate (CAS), followed by the formation of CAS hydrogels and their subsequent adsorption performances. The CAS includes both hydrophilic and hydrophobic functional groups, enable the formation of a single-component hydrogel through intermolecular interactions in deionized water. The thermal reversibility of CAS hydrogels makes them easily processable into various shapes. The durability of the CAS hydrogel adsorbents can be improved by introducing divalent cations (e.g., Ca²⁺), which create ionically crosslinked hydrogels. The ionically a crosslinked CAS hydrogel adsorbent exhibits a maximum adsorption capacity of 245 mg/g for methylene blue (MB) at 23 °C and a pH of 7. The adsorption behavior of MB on the CAS hydrogel follows both the pseudo-second-order model and the Langmuir adsorption isotherm model. Furthermore, the CAS hydrogel adsorbent maintains a 70 % removal ratio after five cycles. The simplicity of synthesis and hydrogel formation opens up new possibilities for producing and utilizing cellulose-based hydrogels as adsorbents for aqueous contaminants.

Multivariate modeling and process optimization of Hg(II) remediation using solvothermal synthesized 2D MX/Fe3O4 by response surface methodology: characteristics and mechanism study

Two-dimensional MXene with layered structure has recently emerged as a nanomaterial with fascinating characteristics and applicability. Herein, we prepared the newly modified magnetic MXene (MX/Fe₃O₄) nanocomposite using solvothermal approach and investigated its adsorption behavior to study the removal efficiency of Hg(II) ions from aqueous solution. The effect of adsorption parameters such as adsorbent dose, time, concentration, and pH were optimized using response surface methodology (RSM). The experimental data fitted well with quadratic model to predict the optimum conditions for maximum Hg(II) ion removal efficiency which were found to be at adsorbent dose 0.871 g/L, time 103.6 min, concentration 40.17 mg/L, and 6.5 pH respectively. To determine the adequacy of the developed model, a statistical analysis of variance (ANOVA) was used, which demonstrated high agreement between the experimental data and the suggested model. According to isotherm result, the experimental data were following the best agreement with the Redlich-Peterson isotherm model. The results of the experiments revealed that the maximum Langmuir adsorption capacity of 699.3 mg/g was obtained at optimum conditions, which was closed to the experimental adsorption capacity of 703.57 mg/g. The adsorption phenomena was well represented by the pseudo-second-order model (R² = 0.9983). On the whole, it was clear that MX/Fe₃O₄ has lot of potential as a Hg(II) ion impurity removal agent in aqueous solutions.

Genetic and Environmental Factors Influencing the Production of Select Fungal Colorants: Challenges and Opportunities in Industrial Applications

Natural colorants, mostly of plant and fungal origins, offer advantages over chemically synthetic colorants in terms of alleviating environmental pollution and promoting human health. The market value of natural colorants has been increasing significantly across the globe. Due to the ease of artificially culturing most fungi in the laboratory and in industrial settings, fungi have emerged as the organisms of choice for producing many natural colorants. Indeed, there is a wide variety of colorful fungi and a diversity in the structure and bioactivity of fungal colorants. Such broad diversities have spurred significant research efforts in fungi to search for natural alternatives to synthetic colorants. Here, we review recent research on the genetic and environmental factors influencing the production of three major types of natural fungal colorants: carotenoids, melanins, and polyketide-derived colorants. We highlight how molecular genetic studies and environmental condition manipulations are helping to overcome some of the challenges associated with value-added and large-scale productions of these colorants. We finish by discussing potential future trends, including synthetic biology approaches, in the commercial production of fungal colorants.

Recent Advances and Progress on Melanin: From Source to Application

Melanin is a biological pigment formed by indoles and phenolic compounds. It is widely found in living organisms and has a variety of unique properties. Due to its diverse characteristics and good biocompatibility, melanin has become the focus in the fields of biomedicine, agriculture, the food industry, etc. However, due to the wide range of melanin sources, complex polymerization properties, and low solubility of specific solvents, the specific macromolecular structure and polymerization mechanism of melanin remain unclear, which significantly limits the further study and application of melanin. Its synthesis and degradation pathways are also controversial. In addition, new properties and applications of melanin are constantly being discovered. In this review, we focus on the recent advances in the research of melanin in all aspects. Firstly, the classification, source, and degradation of melanin are summarized. Secondly, a detailed description of the structure, characterization, and properties of melanin is followed. The novel biological activity of melanin and its application is described at the end.

WITHDRAWN: Heavy metal ions and dyes removal from aqueous solution using Aloevera-based biosorbent: A systematic review

This article has been withdrawn: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been withdrawn at the request of the authors, editor and publisher. The publisher regrets that an error occurred which led to the premature publication of this paper. The publisher apologizes to the readers for this unfortunate erro

Fungal necromass presents a high potential for Mercury immobilization in soil

Past industrial activities have generated many contaminated lands from which Mercury (Hg) escapes, primarily by volatilization. Current phytomanagement techniques aim to limit Hg dispersion by increasing its stabilization in soil. Although soil fungi represent a source of Hg emission associated with biovolatilization mechanisms, there is limited knowledge about how dead fungal residues (i.e., fungal necromass) interact with soil Hg. This study determined the Hg biosorption potential of fungal necromass and the chemical drivers of passive Hg binding with dead mycelia. Fungal necromass was incubated under field conditions with contrasting chemical properties at a well-characterized Hg phytomanagement experimental site in France. After four months of incubation in soil, fungal residues passively accumulated substantial quantities of Hg in their recalcitrant fractions ranging from 400 to 4500 μg Hg/kg. In addition, infrared spectroscopy revealed that lipid compounds explained the amount of Hg biosorption to fungal necromass. Based on these findings, we propose that fungal necromass is likely an important factor in Hg immobilization in soil.

Dynamic Removal of Nickel (II) on Elaeis guineensis Waste Bed: Study of the Breakage Curve and Simulation

This research focused on the use of residual fiber from oil palm (Elaeis guineensis) for Ni (II) adsorption in a packed bed column. An analysis was conducted on the effect and statistical incidence of changes in temperature, adsorbent particle size, and bed height on the adsorption process. The results showed that particle size and bed height significantly affect the adsorption of Ni (II) ions, reaching adsorption efficiencies between 87.24 and 99.86%. A maximum adsorption capacity of 13.48 mg/g was obtained in the bed with a break time of 180 min. The Ni (II) adsorption in the dynamic system was evaluated by the analysis of the breakage curve with different theoretical models: Yoon-Nelson, dose-response, and Adams-Bohart; the dose-response model was the most appropriate to describe the behavior of the packed bed with an R² of 84.56%. The breakthrough curve obtained from Aspen Adsorption^® appropriately describes the experimental data with an R² of 0.999. These results indicate that the evaluated bioadsorbent can be recommended for the elimination of Ni (II) in aqueous solutions in a dynamic system, and the simulation of the process can be a tool for the scalability of the process.

Synthetization and characterization of SnCaAl2O3 nanocomposite and using as a superior adsorbent for Pb, Zn, and Cd ions in polluted water

The presence of heavy metals in drinking water or wastewater poses a serious threat to the ecosystem. Hence, the present study focused on synthesizing SnCaAl2O3 core-shell nanoparticles (C.N.P.s) in the α-Alumina phase by thermal annealing a stacked structure sandwiched between two Al2O3 layers at low temperatures. The obtained structure showed Sn N.P. floating gate with an Al2O3 dielectric stacked tunneling barrier to remove the excess of these heavy metals from polluted water. To characterize the prepared composites, X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and high-resolution transmission electron microscopy (HR-TEM) were used. The synthesized SnCaAl2O3 C.N.P.s composite was examined to utilize it as an adsorbent for removing Zn, Cd, and Pb divalent cations. The removal efficiency was studied by various parameters such as adsorbent dose, pH, contact time, metal concentrations, temperature, and coexisting ions. The experimental results were tested via Langmuir and Freundlich isotherm models. The obtained results were convenient to the Freundlich isotherm model. Moreover, the adsorption thermodynamic behavior of Zn+2, Cd+2, and Pb+2 on the synthesized composite was examined, and the process is endothermic and spontaneous under experimental conditions. The results illustrated that the adsorption efficiency of the SnCaAl2O3 core-shell nanoparticles (C.N.P.s) ranged from 88% to about 100% for all cations.

Discussion on the thermodynamic calculation by distribution constant in Journal of Contaminant Hydrology 243 (2021) 103906

This comment discussed the calculation of thermodynamic parameters about the paper published in Journal of Contaminant Hydrology 243 (2021) 103906. Despite the paper's novelty and innovation, the distribution constant (K_d) with a dimension of L/mg is not the standard equilibrium constant (K^o), therefore, it cannot be used to calculate the thermodynamic parameters. By analyzing the incorrect results and providing the reasonable method for calculating the thermodynamic parameters，this comment is helpful to understand the calculation principle of thermodynamic parameters by the distribution constant and avoid the misuse of incorrect formulas.

Suggested Sustainable Medical and Environmental Uses of Melanin Pigment From Halotolerant Black Yeast Hortaea werneckii AS1

The marine ecosystem is a complex niche with unique environmental circumstances. Microbial communities from the sea are one of the main origins of compounds with tremendous capabilities. Marine yeasts have the ability to produce secondary metabolites that are architecturally distinct from those found in terrestrial species. Melanin pigment synthesized by marine halotolerant black yeast Hortaea werneckii AS1 isolated from Mediterranean salt lakes in Alexandria, Egypt was found to exert a radical scavenging effect on 2,2-diphenyl-1-picrylhydrazyl (DPPH) with an IC₅₀ of 61.38 μg/ml. Furthermore, it showed no cytotoxicity toward human skin fibroblast cell line (HSF) with an IC₅₀ value above 0.1 mg/ml. The antimicrobial capability of the pigment was revealed against the tested number of bacterial and fungal strains with the highest inhibition zone of 25 mm against Aeromonas sp. and a growth inhibition percentage up to 63.6% against Aspergillus niger. From an environmental impact point of view, the pigment disclosed a heavy metal removal efficiency of 85.7, 84.8, and 81.5% for Pb²⁺, Cd²⁺, and Ni²⁺, respectively, at 100 mg/L metal concentration. The previously mentioned results suggested melanin from H. werneckii AS1 as a promising biocompatible candidate in various medical, cosmetics, pharmaceutical, and environmental applications.

Synthesis of hybrid biosorbent based on 1,2-cyclohexylenedinitrilotetraacetic acid modified crosslinked chitosan and organo-functionalized calcium alginate for adsorptive removal of Cu(II)

The present study is based on the synthesis of a novel hybrid biosorbent using 1,2-cyclohexylenedinitrilotetraacetic acid modified crosslinked chitosan and amino-thiocarbamate moiety functionalized sodium alginate (CDTA-CS/TSC-CA). The fabricated sorbent was employed to investigate the efficient recovery of Cu(II) from aqueous media. CDTA-CS/TSC-CA was characterized using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). Analysis confirmed the successful modification of both biopolymers and subsequent loading of Cu(II) ions. CDTA-CS/TSC-CA was casted in the form of hydrogel beads having different CDTA-CS to TSC-CA mass ratios i.e., 10.0-40.0% by mass. The hydrogel beads 4CDTA-CS/TSC-CA with CDTA-CS/TSC-CA mass ratio of 40.0% was found most effective for copper sorption. Equilibrium sorption results showed that initial concentration of copper, medium pH, contact time, sorbent dosage and temperature influenced the sorption capacity (q_e). Rate of sorption data was interpreted using different kinetic models and found best fitted with pseudo second order rate expression (R² ≈ 0.99), illustrating that the rate determining step includes the electron density transfer from sorbent coordination sites to central copper ions. Crank's RIDE equation and Elovich chemisorption model (ECM) revealed the presence of two sorption phases, initially rapid sorption followed by comparatively a slow uptake. Equilibrium sorption data was well depicted by Langmuir model and maximum monolayer adsorption capacity (q_m) was computed as 276.53 mg·g^-1 at 298 K. Standard Gibbs free energy change, ∆G° (-19.99, -20.18 and -20.36 kJ/ mol), standard enthalpy change, ∆H° (-8.95 kJmol) and standard entropy change, ∆S° (0.04 kJ/mol K^-1) values suggested that the adsorption process is spontaneous and exothermic. Hence, 4CDTA-CS/TSC-CA was found efficient biosorbent for copper removal from its dilute effluents.

Potential of hypercrosslinked microporous polymer based on carbazole networks for Pb(II) ions removal from aqueous solutions

In this research, porous adsorbents of hypercrosslinked microporous polymer based on carbazole networks (HCP-CN) were synthesized for Pb(II) elimination from wastewaters. The results demonstrated that the extreme HCP-CN adsorbents utilization in wastewater treatment could remove more than 99.88% of Pb (II) ions. Furthermore, the two consumed adsorbents similarly indicated rapid adsorption kinetics, and it merely took a while to achieve adsorption equilibrium. These characteristics showed that HCP-CN adsorbent was an outstanding candidate for Pb(II) elimination from wastewater. Besides, the thermodynamic characteristics involving Gibbs free energy change (∆G⁰), entropy change (∆S⁰), and enthalpy change (∆H⁰) of the adsorption procedure were evaluated, and the results affirmed that the adsorption process was exothermic and spontaneous. In addition, response surface methodology (RSM) as a statistical investigation was used to optimize adsorption factors to obtain maximum adsorption capacity and investigate the interactive effect of parameters using central composite design (CCD). Optimum conditions obtained by RSM for maximum adsorption capacity of 26.02 mg/g are 35 °C, 40 mg/L, 11, 60 min, and 99.88 for temperature, initial concentration, pH, time, and removal percent, respectively. In the kinetic modeling study, the second-order model was selected as the best model. The values R² at temperatures 35 °C, 40 °C, and 55 °C are 0.997, 0.9997, and 0.998, respectively. In the isotherm modeling, Hill model with a value R² of 0.9766 has a superior precision compared to the other isotherm models. Also, the values of ΔH and ΔS at Pb(II) concentration of 60 mg/L are 122.622 kJ/mol and 0.463 kJ/mole K, respectively.

Acenaphthene adsorption onto ultrasonic assisted fatty acid mediated porous activated carbon-characterization, isotherm and kinetic studies

Adsorbents originated from biological materials play a vital role in the remediation of diverse toxic pollutants due to their high efficacy, low cost and being environmentally friendly. The present study focusses on the palm shell activated carbon obtained from agricultural waste precursor (palm shell) with the aid of oleic acid activation along with ultrasonic assistance and its effective utilization for acenaphthene adsorption from aqueous and real effluent. The synthesized Ultrasonic assisted palm shell activated carbon (UAC) possessed high surface area of 506.84 m²/g and distinct porous structure as depicted by SEM analysis. The outcomes of zero discharge analyses and acenaphthene adsorption results vouchsafed that, using oleic acid as an effective catalyst, is explicitly advantageous to combine with ultrasonic assistance to fabricate a highly efficient adsorbent for acenaphthene removal from aqueous solution. The UAC obtained at the selected parameters levels, such as temperature of 45 °C and ultrasonic time of 40 min, has the adsorption capacity of 52.745 mg/g. Sips isotherm model computed from the experimental data gave the best fit among the examined isotherm models. To complete the study of adsorption properties of UAC towards acenaphthene, kinetic modeling and thermodynamic aspects of the adsorption process were also scrutinized. The kinetic studies proved that pseudo-second order model is compatible with the experimental data and thermodynamic results revealed that the adsorption process is of endothermic nature. Overall, ultrasonic-assisted preparation of activated carbon from palm shell actuated using Oleic acid was found to be a highly efficient adsorbent which was suitable for acenaphthene removal from aqueous solution.

A review on adsorptive separation of toxic metals from aquatic system using biochar produced from agro-waste

Water is a basic and significant asset for living beings. Water assets are progressively diminishing due to huge populace development, industrial activities, urbanization and rural exercises. Few heavy metals include zinc, copper, lead, nickel, cadmium and so forth can easily transfer into the water system either direct or indirect activities of electroplating, mining, tannery, painting, fertilizer industries and so forth. The different treatment techniques have been utilized to eliminate the heavy metals from aquatic system, which includes coagulation/flocculation, precipitation, membrane filtration, oxidation, flotation, ion exchange, photo catalysis and adsorption. The adsorption technique is a better option than other techniques because it can eliminate heavy metals even at lower metal ions concentration, simplicity and better regeneration behavior. Agricultural wastes are low-cost biosorbent and typically containing cellulose have the ability to absorb a variety of contaminants. It is important to note that almost all agro wastes are no longer used in their original form but are instead processed in a variety of techniques to improve the adsorption capacity of the substance. The wide range of adsorption capacities for agro waste materials were observed and almost more than 99% removal of toxic pollutants from aquatic systems were achieved using modified agro-waste materials. The present review aims at the water pollution due to heavy metals, as well as various heavy metal removal treatment procedures. The primary objectives of this research is to include an overview of adsorption and various agriculture based adsorbents and its comparison in heavy metal removal.

Central Composite Design for Adsorption of Pb(II) and Zn(II) Metals on PKM-2 Moringa oleifera Leaves

Biosorption is a very effective technique to eliminate the heavy metals present in the wastewater that utilize nongrowing biomass. The adsorption ability of the Periyakulam-2 (PKM-2) variety of Moringa Oleifera leaves (MOLs) to eliminate Pb(II) and Zn(II) ions from an aqueous solution was examined in this work. Fourier transform infrared (FTIR) spectroscopy, field-emission scanning electron microscopy, energy-dispersive X-ray (EDX) analysis, X-ray powder diffraction, and Brunauer-Emmett-Teller methods were used to characterize the PKM-2 variety of MOLs. The set of variables consists of the metal ion initial concentration, a dosage of the adsorbent, and pH were optimized with the help of the response surface methodology to get maximum metal removal efficiency of lead and zinc metals using the PKM-2 MOL biosorbent. A maximum Pb(II) removal of 95.6% was obtained under the condition of initial concentration of metal ions 38 mg/L, a dosage of the adsorbent 1.5 g, and pH 4.7, and a maximum zinc removal of 89.35% was obtained under the condition of initial concentration of metal ions 70 mg/L, a dosage of the adsorbent 0.6 g, and pH 3.2. The presence of lead and zinc ions on the biosorbent surface and the functional groups involved in the adsorption process were revealed using EDX and FTIR analysis, respectively. The adsorption data were evaluated by employing different isotherm and kinetic models. Among the isotherm models, Langmuir's isotherm showed that the best fit and maximum adsorption capacities are 51.71 and 38.50 mg/g for lead and zinc, respectively. Kinetic studies showed accordance with the pseudo-second-order model to lead and zinc metal adsorption. Thermodynamic parameters confirmed (ΔG° < 0, ΔH° < 0, and ΔS° > 0) that the sorption mechanism is physisorption, exothermic, spontaneous, and favorable for adsorption. The results from this study show that the MOL of the PKM-2 type is a promising alternative for an ecofriendly, low-cost biosorbent that can effectively remove lead and zinc metals from aqueous solutions.

Statistical optimization of biosurfactant production using waste biomaterial and biosorption of Pb2+ under concomitant submerged fermentation

The present study was conducted to statistically optimize the biosurfactant production yield of Pseudomonas sp. F5 using raw orange peel extract (Central composite design (CCD) design; Surface tension (ST) reduction = 32.41 dyne/cm; biosurfactant yield = ~2.4 g/L). The extracted biosurfactant was characterized as a glycolipid having predominant mono-rhamnolipids than di-rhamnolipids with a critical micelle concentration (CMC) of 40 mg/L. The potential of strain F5 for good biosurfactant yield during Pb²⁺ stress and the inherent mechanism for simultaneous biosorption of Pb²⁺ was also investigated. During concomitant submerged fermentation from 100 to 500 mg/L of Pb²⁺ showed enhancement in adsorption capacity from 99.44 to 267.86 mg/g respectively having 60.33 ± 2.87 of emulsification index (E₂₄%) measured at 100 mg/L Pb²⁺ corresponding to maximum biosurfactant production during metal stress. The bacterium showed a high Pb²⁺ MIC (minimum inhibitory concentration) of 2200 mg/L and efficiently biosorbed Pb²⁺ ions at pH 7 and a dosage of 0.05 g under varying initial metal ion concentration and contact time. The exothermic biosorption (chemisorption) mechanism was found to be fitted well with Langmuir (R² = 0.9859) and Pseudo second-order kinetic model (R² = 0.9975; 200 mg/L) having a maximum adsorption capacity of 294.12 mg/g. These findings indicated the excellent potential of biosurfactant producing strain F5 in the removal of Pb²⁺ ions from aqueous system and management of agrowastes as suitable carbon substrate.

Isolation and Characterization of Magnetic Oil Palm Empty Fruits Bunch Cellulose Nanofiber Composite as a Bio-Sorbent for Cu(II) and Cr(VI) Removal

In the present study, magnetic oil palm empty fruits bunch cellulose nanofiber (M-OPEFB-CNF) composite was isolated by sol-gel method using cellulose nanofiber (CNF) obtained from oil palm empty fruits bunch (OPEFB) and Fe₃O₄ as magnetite. Several analytical methods were utilized to characterize the mechanical, chemical, thermal, and morphological properties of the isolated CNF and M-OPEFB-CNF. Subsequently, the isolated M-OPEFB-CNF composite was utilized for the adsorption of Cr(VI) and Cu(II) from aqueous solution with varying parameters, such as pH, adsorbent doses, treatment time, and temperature. Results showed that the M-OPEFB-CNF as an effective bio-sorbent for the removal of Cu(II) and Cr(VI) from aqueous solution. The adsorption isotherm modeling revealed that the Freundlich equation better describes the adsorption of Cu(II) and Cr(VI) on M-OPEFB-CNF composite. The kinetics studies revealed the pseudo-second-order kinetics model was a better-described kinetics model for the removal of Cu(II) and Cr(VI) using M-OPEFB-CNF composite as bio-sorbent. The findings of the present study showed that the M-OPEFB-CNF composite has the potential to be utilized as a bio-sorbent for heavy metals removal.

Carnauba straw powder treated with bentonite for copper adsorption in aqueous solution: isothermal, kinetic and thermodynamic study

In this work, the natural and modified carnauba powder from the addition of bentonite was evaluated for the adsorption of Cu(II) ions in synthetic solution. The results showed that the carnauba powder treated with bentonite (CPTB) showed a better percentage of removal of Cu(II) ions when compared to natural carnauba powder (NCP). The best results for both adsorbents were obtained with pH 5. The adsorption kinetics was governed by the pseudo-second-order model for both bioadsorbents studied. While the isothermal behavior was governed by the Langmuir model and showed that the adsorption capacity of the CPTB for Cu(II) was 21.98 mg·g^-1. The interaction of the metal and CPTB was also investigated by means of thermodynamic parameters showing that the adsorption process is not spontaneous, although the values of ΔG° decrease with the increase in temperature from 20 to 40 °C and endothermic causing an increase in the degree of disorder at the solid/liquid interface. The results showed that the CPTB is a material with potential adsorbent for the removal of copper ions.

Fabrication of novel amine-functionalized magnetic silica nanoparticles for toxic metals: kinetic and isotherm modeling

In this research, an amine-functionalized magnetic silica nanosorbent was prepared using the co-precipitation technique, and this nanosorbent can be effortlessly detached using an external magnetic field. FTIR and SEM analyses identified that the nanosorbent holds extraordinary adsorption characteristics for toxic metals' (copper, cadmium, zinc, and nickel) removal. The adsorption-affecting parameters were optimized, and the thermodynamic studies assessed that the adsorption process seemed to be spontaneous, feasible, and exothermic. The pseudo-first-order and Freundlich models perfectly fit the kinetic and equilibrium data, respectively. Langmuir monolayer capacity of the nanosorbent was analyzed using nonlinear evaluation methods such as 419.9 mg/g for copper, 321.9 mg/g for nickel, 217.3 mg/g for cadmium, and 137.6 mg/g for zinc. The used adsorbent was simply rejuvenated using the 0.2 N HCl solution subsequently with intense agitation. The result of the present research confirms that the produced nanosorbent can be effectively utilized for industrial wastewater management.

Batch and continuous studies on the removal of heavy metals from aqueous solution using biosynthesised melanin-coated PVDF membranes

Heavy metals like mercury, chromium, lead and copper present in groundwater at lower concentrations cause severe health issues and can even be fatal when consumed. The biopigment/biopolymer melanin can be reaped from different sources like bacterium, fungus, and human hair. It has excellent heavy metal ion scavenging property and can be exploited for non-biological applications, substantially including water purification. In this work, melanin nanoparticles were derived from the marine bacterium Pseudomonas stutzeri and were coated onto hydrophobic polyvinylidene fluoride (PVDF) membrane as a support, for batch and continuous removal of heavy metal studies. Batch studies on the effect of pH, temperature and adsorbate dose and continuous adsorption studies on the effect of flow rate, adsorbate and adsorbent mass loadings were carried out by using biosynthesised melanin-coated PVDF membranes for the removal of Hg(II), Cr(VI), Pb(II) and Cu(II). Scanning electron microscope (SEM) images revealed the surface morphology, Fourier-transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDS) deciphered the chemical characteristics of melanin-coated PVDF membranes before and after adsorption. Contact angle measurement confirmed the improvement in hydrophilicity of PVDF membrane upon coating with melanin. The maximum removal percentages of heavy metals achieved by melanin-coated PVDF membranes under batch mode operation were 87.6%, 88.45%, 91.8% and 95.8% for mercury, chromium, lead and copper, respectively optimised at 318 K and pH of 3 for chromium and 5 for other metals. However, the continuous mode of operation with a flow rate of 0.5 mL/min having 1 mg/L of heavy metal solution concentration exposed to 50 mg of melanin loading with a working volume of 200 mL showed better removal efficiencies compared with batch mode. The dynamic studies using Thomas and Yoon-Nelson models described the transient stage of the breakthrough curve and the model constants were calculated for column design and scale-up.

Enhanced Pb(II) adsorption onto functionalized ordered mesoporous carbon (OMC) from aqueous solutions: the important role of surface property and adsorption mechanism

Functionalized ordered mesoporous carbon (MOMC-NP) was synthesized by chemical modification using HNO₃ and H₃PO₄ to enhance Pb(II) adsorption. The phosphate functional group represented by P-O-C bonding onto the surface of OMC was verified by FT-IR and XPS. Batch adsorption experiments revealed the improvement of adsorption capacity by 39 times over the virgin OMC. Moreover, the Pb(II) adsorption results provided excellent fits to Langmuir model and pseudo-second-order kinetic model. The adsorption mechanism of Pb(II) onto MOMC-NP revealed the formation of metal complexes with carboxyl, hydroxyl, and phosphate groups through ion exchange reactions and hydrogen bondings. The calculated activation energy was 22.09 kJ/mol, suggesting that Pb(II) adsorption was a chemisorption. At pH>pH_pzc, the main Pb(II) existing species of Pb(II) and Pb(OH)⁺ combine with the carboxyl, hydroxyl, and phosphate functional groups via electrostatic interactions and hydrogen bonding. All these findings demonstrated that MOMC-NP could be a useful and potential adsorbent for adsorptive removal of Pb(II). Graphical abstract.