Removal of ciprofloxacin from seawater by reverse osmosis

Collaborative adsorption and photocatalytic degradation of high concentration pharmaceutical pollutants in water using a novel dendritic fibrous nano-silica modified with chitosan and UiO-66

This study presents a novel hybrid mesoporous material for degrading drug pollutants in water. The hybrid materials, derived from UiO-66 metal-organic framework and chitosan, coated on nano-silica, showed excellent drug adsorption through hydrogen-bonding interactions and efficient photodegradation of antibiotics. The hybrid material's enhanced conductivity and reduced band gap significantly improved pollution reduction by minimising electron-hole recombination. This allows for more efficient charge transport and better light absorption, boosting the material's ability to break down pollutants. Structural and morphological analyses were conducted using various techniques, including scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller analysis, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Optimising the adsorption-photodegradation process involved investigating pH, catalyst dose, and radiation time. Non-linear optimisation revealed an efficiency exceeding 85 % for 400 mg/L tetracycline and doxycycline, the model antibiotics. The optimal parameters for maximal elimination were determined as pH = 4.3, hybrid mesosphere dose = 4.0 mg/mL, and radiation time = 10 min. Kinetic studies favored pseudo-second-order diffusion models over pseudo-first-order models. The hybrid mesosphere showed sustained efficiency after three cycles and performed well in real aqueous samples, removing over 80 % of each antibiotic. This study demonstrates the potential of the hybrid mesoporous material for removing pharmaceutical pollutants in water systems.

Porous Fe-Porphyrin as an Efficient Adsorbent for the Removal of Ciprofloxacin from Water

Antibiotics are widely used in medicine, but they are not fully metabolized in the body and can end up in wastewater. Conventional wastewater treatment methods fail to completely remove antibiotic residues, which can then enter rivers and streams. Adsorption is a promising technique for removing antibiotics from wastewater, even at low concentrations. The successful one-pot synthesis of an adsorbent, iron-containing porphyrin-based porous organic polymer (Fe-POP), was achieved through the reaction of pyrrole groups and terephthalaldehyde in the presence of FeCl3. Characterized by a substantial BET surface area of 597 m2 g-1, Fe-POP was systematically investigated for its adsorption potential in the removal of the antibiotic Ciprofloxacin (CIP) from aqueous solutions. By systematic variation of key parameters, including pH, adsorbent loading, and CIP concentration, the adsorption conditions were optimized. Under the optimal conditions at pH = 3, CIP concentration of 5 ppm, and 25 mg of Fe-POP, the maximum adsorption capacity reached an impressive 263 mg g-1. The robust adsorption behavior was elucidated through the fitting of experimental data to the Langmuir adsorption isotherm (R2 = 0.962) and the pseudo-second-order kinetic model (R2 = 0.999) with lower error values. These models suggested that the adsorption process predominantly involved chemical interactions between CIP molecules and the Fe-POP surface. Fe-POP exhibited a robust structure with a high adsorption capacity, showcasing its efficacy in removing CIP contaminants from water. Therefore, Fe-POP can be considered a valuable adsorbent for water treatment applications, specifically for antibiotic removal.

Towards sorptive eradication of pharmaceutical micro-pollutant ciprofloxacin from aquatic environment: A comprehensive review

Antibiotics are widely prioritized pharmaceuticals frequently adopted in medication for addressing numerous ailments of humans and animals. However, the non-judicious disposal of ciprofloxacin (CIP) with concentration levels exceeding threshold limit in an aqueous environment has been the matter of growing concern nowadays. CIP is found in various waterways with appreciable mobility due to its limited decay in solidified form. Hence, the effective eradication strategy of this non-steroidal anti-inflammatory antibiotic from aqueous media is pivotal for preventing the users and the biosphere from their hazardous impacts. Reportedly several customary techniques like reverse osmosis, precipitation, cross-filtration, nano-filtration, ion exchange, microbial remediation, and adsorption have been employed to eliminate CIP from water. Out of them, adsorption is ascertained to be a potential method because of lesser preliminary investment costs, ease of operation, greater efficiency, less energy usage, reduced chemical and biological slurry production, and ready availability of precursor materials. Towards remediation of ciprofloxacin-laden water, plenty of researchers have used different adsorbents. However, the present-day challenge is opting the promising sorbent and its application towards industrial scale-up which is vital to get reviewed. In this article, adsorbents of diverse origins are reviewed in terms of their performances in CIP removal. The review stresses the impact of various factors on sorptive assimilation of CIP, adsorption kinetics, isotherms, mechanism of ionic interaction, contrivances for CIP detection, cost estimation and reusability assessments of adsorbents also that may endorse the next-generation investigators to decide the efficacious, environmental appealing and cost-competitive adsorbents for effective riddance of CIP from wastewater.

The mechanism of silica and transparent exopolymer particles (TEP) on reverse osmosis membranes fouling

Dissolved silica and transparent exopolymer particles (TEP) are the primary foulants in reverse osmosis (RO) desalinated brackish water and wastewater. In this study, we investigated the fouling properties of varying silica concentrations with TEP on the membrane surface and discovered a synergistic fouling effect between the silanol group (Si-OH) and the TEP carboxyl group (-COOH). The membrane fouling experiments showed that silica fouling approached saturation at 6 mM, with little variation in membrane flux as the silica concentration increased. Furthermore, the -OH functional group of the monosilicate molecule can chemically react with the -COO- functional group on the membrane surface to create hydrogen bonds, allowing monosilicate deposition directly on the membrane. Silica-silica interactions reacted with aggregates at high silica concentrations and joined with TEP to create a more substantial, more complex cross-linked network, resulting in severe membrane fouling. At pH 9, silica fouling was most severe due to the dramatic increase in the solubility of monosilicic acid dissolution in solution and the decreased polymerization rate. This work reveals the essential process of membrane fouling induced by silica and TEP, significantly increasing knowledge on silica-TEP fouling.

Heterogeneous porous biochar-supported nano NiFe2O4 for efficient removal of hazardous antibiotic from pharmaceutical wastewater

Due to the dual issues of antibiotic resistance and bioaccumulation toxicity, antibiotics are ubiquitously present in aquatic environments, and this is causing serious concern. Herein, novel nickel ferrite (NiFe2O4) nanoparticles were successfully loaded onto activated biochar (BC) derived from banana peel (BP) to obtain magnetic nanocomposite (BC-NiFe2O4) as an effective biosorbent for the ciprofloxacin antibiotic (CIP) elimination from pharmaceutical effluent. A facile co-precipitation approach was utilized to construct the heterogeneous BC-NiFe2O4. The synthesized materials were systematically characterized using techniques such as XRD, FE-SEM, EDX, HR-TEM, BET, FTIR, and XPS. In addition, the magnetic measurements indicated the ferromagnetic behavior of the BC-NiFe2O4 sample. The influencing factors (i.e., pH, contact time, initial concentration, dose of adsorbent, ions interference, and solution temperature) of the adsorption process were also well studied. The adsorption capacity of the BC-NiFe2O4 heterostructure was 68.79 mg g-1 compared to the BC sample (35.71 mg g-1), confirming that the loading of magnetically NiFe2O4 nanoparticles onto the surface of porous biochar enhanced its stability and adsorption performance for CIP removal, wherein the metal-antibiotic complex has a significant effect for the removal of CIP. Moreover, the Langmuir adsorption isotherm and the pseudo-second-order model displayed a good fit for the experimental data. The values of △H° and △G° revealed that the adsorption process was endothermic and spontaneous. The coordination affinities, π-π stacking, and H-bonding interactions play a more critical role in the adsorption mechanism that confirmed by FTIR and XPS analysis. To study the stability of BC-NiFe2O4 nanocomposites, desorption and recycling studies were investigated. The results revealed that after three cycles, no significant loss in removal efficiency was detected, reflecting the stability and reusability of the prepared BC-NiFe2O4 nanocomposite.

Removal of pesticides from secondary treated urban wastewater by reverse osmosis

The residues of pesticides that reach water resources from agricultural activities in several ways contaminate drinking water resources and threaten aquatic life. This study aimed to investigate the performance of three reverse osmosis (RO) membranes (BW30-LE, SW30-XLE, and GE-AD) in rejecting four different pesticides (tributyl phosphate, flutriafol, dicofol, and irgarol) from secondary treated urban wastewater and also to elucidate the mechanisms underlying the rejection of these pesticides. RO experiments were conducted using pesticide-spiked wastewater samples under 10 and 20 bar transmembrane pressures (TMP) and membrane performances were evaluated. Overall, all the membranes tested exhibited over 95% rejection performances for all pesticides at both TMPs. The highest rejections for tributyl phosphate (99.0%) and irgarol (98.3%) were obtained with the BW30-LE membrane, while for flutriafol (99.9%) and dicofol (99.1%) with the GE-AD membrane. The increase in TMP from 10 to 20 bar did not significantly affect the rejections of all pesticides. The rejection performances of RO membranes were found to be governed by projection area as well as molecular weight and hydrophobicity/hydrophilicity of pesticides. Among the membranes tested, the SW30-XLE membrane was the most prone to fouling due to the higher roughness.

Photocatalytic Degradation of Ciprofloxacin by UV Light Using N-Doped TiO2 in Suspension and Coated Forms

The presence of organic compounds such as ciprofloxacin in untreated pharmaceutical wastewater often poses a serious health risk to human and aquatic life when discharged into water bodies. One of the most effective means of removing ciprofloxacin from wastewater is photocatalytic degradation. However, the synthesis of an effective photocatalyst that can degrade the organic pollutant in the wastewater is often a challenge. Hence, this study focuses on the synthesis and application of nitrogen-doped TiO2 (N-TiO2) in suspension and coated forms for the photocatalytic degradation of ciprofloxacin in wastewater by applying UV-light irradiation. The nitrogen-doped TiO2 photocatalyst was prepared by a co-precipitation process and characterized using energy-dispersive X-ray spectroscopy, scanning electron microscopy, and Fourier-transform infrared spectroscopy. The effects of the initial concentration of the ciprofloxacin (6, 12, 18, or 30 ppm), pH (3, 5, 7, or 9), and flow rate (0.4, 0.8, 0.95, or 1.5 L/min) on the degradation of the ciprofloxacin over the N-TiO2 were investigated. The results showed that the removal efficiency of ciprofloxacin was enhanced by increasing the initial ciprofloxacin concentration, while it was decreased with the increase in the feed flow rate. The best operating conditions were obtained using an initial ciprofloxacin concentration of 30 ppm, pH of 5, and feed flow rate of 0.4 L/min. Under these operating conditions, removal efficiencies of 87.87% and 93.6% were obtained for net TiO2 and N-TiO2 of 5 wt% in suspension form, respectively, while 94.5% ciprofloxacin removal efficiency was obtained using coated 5 wt% N-TiO2 after 2 h of photocatalytic degradation. Based on the response surface optimization strategy, a quadratic model was suggested to obtain mathematical expressions to predict the ciprofloxacin removal efficiency under various studied operational parameters.

Removal of ciprofloxacin antibiotic pollutants from wastewater using nano-composite adsorptive membranes

The emergence of antibiotics in water has been globally recognized as a critical pollution issue. Antibiotics (such as Ciprofloxacin (CPFX) pose a serious threat to humans and to the ecosystem due to its accumulation in water sources which can lead to chronic health problems and endanger aquatic life. It is therefore crucial to properly remove them from water. In this work, a nano-composite adsorptive membrane based on Zirconium Phosphate (ZrP) adsorbent supported on Polyethersulfone (PES) was synthesized and evaluated for the removal of CPFX from synthetic aqueous solutions. The membranes described here showed a very high antibiotic removal rate. The effect of various parameters such as the initial concentration of the antibiotic, the adsorbent dosage, contact time, pH, and temperature was studied. The equilibrium data were found to reasonably best fit with the Temkin isotherm model. The membranes showed a high ciprofloxacin removal (99.7%) as opposed to (68%) when PES membrane alone was used. Moreover, a significant improvement in the membrane's water flux (100.84 L/m².h) and permeability (97.62 L/m².hr.bar) were noticed as opposed to pure PES membrane's flux and permeability. The adsorptive membranes were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET). The results confirmed the successful formation of ZrP nanoparticles adsorbent within the membrane matrix, and with enhanced hydrophilic properties. The membrane was successfully regenerated and reused up to 5 times. The results of this work showed the potential of such membranes for the removal of ciprofloxacin and at a high efficiency.

Reducing the negative impact of ceftriaxone and doxycycline in aqueous solutions using ferrihydrite/plant-based composites: mechanism pathway

The adsorption of ceftriaxone (CET) and doxycycline (DOX) from aqueous solution using ferrihydrite/plant-based composites (silica rice husk) to reduce their negative impact on the ecosystem was adequately studied. On the other hand, phosphate and humic acid are often found in water and soil; in view of this, their effects on the adsorption of CET and DOX were investigated. The results showed that the removal of ceftriaxone decreased with an increase in pH, while that of doxycycline did not. Ferrihydrite with 10% silica rice husk (Fh-10%SRH) has the highest maximum adsorption capacity of 139 and 178 mg g^-1 for CET and DOX, respectively, at room temperature based on Liu's adsorption isotherm. This implies that the presence of silica rice husk increases CET and DOX uptake due to an increase in the pore volume of FH-10%SRH. The results showed that phosphate had a significant inhibition role on CET adsorption and minor on DOX, whereas humic acid salt affected neither case. Increase in temperature up to 333 K favored the adsorption of both contaminants. The proposed adsorption mechanisms of ceftriaxone are electrostatic interaction, n-π interaction, and hydrogen bond, while that of DOX entails n-π interaction and hydrogen bond.

Enhanced Ciprofloxacin Removal from Aqueous Solution Using a Chemically Modified Biochar Derived from Bamboo Sawdust: Adsorption Process Optimization with Response Surface Methodology

Contamination of water by ciprofloxacin has become a significant concern due to its adverse health effects and growing evidence of antimicrobial-resistant gene evolution. To this end, a chemically modified bamboo biochar was prepared from bamboo sawdust to effectively remove ciprofloxacin (CIP) from an aqueous solution. Under similar adsorption conditions, the modified bamboo biochar (MBC) has an excellent CIP removal efficiency (96%) compared to unmodified bamboo biochar (UBC) efficiency (45%). Thus, MBC was used in batch adsorption experiments, and the process was optimized with the central composite design (CCD) framework of response surface methodology (RSM). Sorption process parameters such as initial CIP concentration, pH, adsorbent dose, and contact time were studied and found to have a significant effect on CIP removal. The optimal CIP removal (96%) was obtained at MBC dose (0.5 g L-1), CIP initial concentration (20 mg L-1), pH (7.5), and contact time (46 min). The adsorption kinetic data were well described by the pseudo-second-order model ( $R^2=0.999$ ), and both Langmuir ( $R^2=0.994$ ) and Freundlich ( $R^2=0.972$ ) models gave the best fit in CIP adsorption isotherm analysis. The maximum monolayer adsorption capacity of the MBC was 78.43 mg g-1 based on the Langmuir isotherm model. These results suggest that CIP adsorption was mainly controlled by chemisorption. Moreover, the CIP adsorption process was endothermic and spontaneous. Overall, MBC is a low-cost, efficient, and recyclable adsorbent for eliminating emerging contaminants such as ciprofloxacin from an aqueous solution.

A High Flux Electrochemical Filtration System Based on Electrospun Carbon Nanofiber Membrane for Efficient Tetracycline Degradation

In this work, an electrochemical filter using an electrospun carbon nanofiber membrane (ECNFM) anode fabricated by electrospinning, stabilization and carbonization was developed for the removal of antibiotic tetracycline (TC). ECNFM with 2.5 wt% terephthalic acid (PTA) carbonized at 1000 °C (ECNFM-2.5%-1000) exhibited higher tensile stress (0.75 MPa) and porosity (92.8%), more graphitic structures and lower electron transfer resistance (23.52 Ω). Under the optimal condition of applied voltage 2.0 V, pH 6.1, 0.1 mol L−1 Na2SO4, initial TC concentration 10 ppm and membrane flux 425 LMH, the TC removal efficiency of the electrochemical filter of ECNFM-2.5%-1000 reached 99.8%, and no obvious performance loss was observed after 8 h of continuous operation. The pseudo-first-order reaction rate constant in flow-through mode was 2.28 min−1, which was 10.53 times higher than that in batch mode. Meanwhile, the energy demand for 90% TC removal was only 0.017 kWh m−3. TC could be converted to intermediates with lower developmental toxicity and mutagenicity via the loss of functional groups (-CONH2, -CH3, -OH, -N(CH3)2) and ring opening reaction, which was mainly achieved by direct anodic oxidation. This study highlights the potential of ECNFM-based electrochemical filtration for efficient and economical drinking water purification.

Novel Magnetite Nanocomposites (Fe3O4/C) for Efficient Immobilization of Ciprofloxacin from Aqueous Solutions through Adsorption Pretreatment and Membrane Processes

The release of antibiotics into the aquatic environment enhances the drug resistance capabilities of microorganisms, as in large water reservoirs, their concentrations are lesser than their minimum bactericidal concentration, and microorganisms living there become resistant to such antibiotics. Therefore, robust hybrid technologies, comprising of efficient conventional adsorption processes and modern membranes processes, are needed to effectively remove such pollutants from industrial effluents. The present study is an attempt where iron-based magnetic carbon nanocomposites (Fe3O4/C) were prepared from mango biomass precursors and utilized as an adsorbent for the removal ciprofloxacin from wastewater in combination with three types of membranes that are robust but fouled by organic matter. The Fe3O4/C composite was characterized using energy dispersive X-Ray (EDX) technique, X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Brunauer Emmett Teller (BET), Barrett–Joyner-Halenda (BJH) surface area, Thermogravimetric (TG)/Thermal differential analysis (DTA) and point of zero charge pH analyses. Initially, batch adsorption experiments were used to determine adsorption parameters. Then the adsorption unit was coupled with membrane pilot plant where the adsorption role was to adsorb CIPRO before entering into the membrane unit to control fouling caused by selected antibiotic. In batch experiments, the equilibrium time was found as 60 min and kinetics data were more favorably accommodated with the pseudo-2nd-order model (R2 = 0.99). Langmuir model (R2 = 0.997) more favorably accommodated the equilibrium data in comparison to other models used such as the Freundlich (R2 = 0.86), Temkin (R2 = 0.91) and Jovanovich (R2 = 0.95) models. The thermodynamic aspects of the adsorption process were also evaluated and the process was found to be spontaneous, feasible and exothermic. The influence of adsorbent dosage and pH, were also investigated, where the optimal adsorption conditions were: optimum pH = 7 and optimum Fe3O4/C dosage = 0.04 g. The CIPRO-loaded nanocomposite was regenerated with NaOH, CH3OH and distilled water several times. Improved percent rejections of CIPRO and permeate fluxes with the membrane/adsorption operation were observed as compared to naked membrane operations. Magnetic adsorbent was found as a best solution of foul control; a defect in the modern robust technology of membranes. However, further experimentation is needed to validate the present findings.

Mesoporous and adsorption behavior of algal biochar prepared via sequential hydrothermal carbonization and ZnCl2 activation

In this study, biochar derived from brown algal Ascophyllum nodosum was synthesized through hydrothermal carbonization (HTC) coupling with ZnCl₂ chemical activation and applied as a sustainable adsorbent for antibiotic removal from water exemplified by ciprofloxacin (CIP). Various surface analysis techniques such as Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and zeta potential were used to clarify the surface properties of prepared biochars. The adsorption performance of biochars was investigated using batch adsorption experiments with a variety of parameters (initial pH, ionic types, temperature and water matrixes). The application of prepared biochar in CIP removal showed a good result of adsorption capacity (150-400 mg g^-1) in different conditions. Overall, algal biochars, as a product recycled from biowaste, demonstrated a novel and promising adsorbent for effective and sustainable method for removal of antibiotics from water.

Zinc ferrite-graphitic carbon nitride nanohybrid for photo-catalysis of the antibiotic ciprofloxacin

2D hybrid sheets of zinc ferrite and graphitic carbon nitride were explored for their application as a UV catalyst for the degradation of ciprofloxacin.

Effective electrocatalytic elimination of chloramphenicol: mechanism, degradation pathway, and toxicity assessment

The residual antibiotics in different environmental media pose a serious threat to human health and the ecosystem. The high-efficient elimination of antibiotics is one of the foremost works. In this study, chloramphenicol (CAP) was eliminated efficiently by electrocatalytic advanced oxidation process with carbon nanotubes/agarose/indium tin oxide (CNTs/AG/ITO) electrode. The influences of different experimental parameters on the degradation efficiency were systematically studied. Under the optimal conditions (4 V potential, 10 wt% CNTs dosage, and pH = 10), the maximum degradation efficiency of CAP (20 mg L-1) achieved 88% within 180 min. Besides, the electrocatalytic degradation pathway and mechanism for CAP were also investigated, •O2- played a major role in the process of electrocatalytic degradation. Based on the QSAR (quantitative structure-activity relationship) model, the toxicities of CAP and identified intermediates were analyzed. Compared with the parent compound, the maximal chronic toxicity of intermediate ((E)-3-(4-nitrophenyl)prop-1-ene-1,3-diol) for daphnid increased 197-fold. Besides, the hybrid toxicity of the degradation system was further confirmed via disk agar biocidal tests with Escherichia coli ATCC25922, which changed slightly during the degradation process. Based on the above results, it is worth noting that the degradation pathway and toxicity assessment should be paid more attention to the treatment of antibiotic wastewater.

Photocatalytic Degradation of Antibiotics by Superparamagnetic Iron Oxide Nanoparticles. Tetracycline Case

The challenges associated with the uncontrolled presence of antibiotics such as tetracycline in the environment have necessitated their removal through different techniques. Tetracycline is hard to degrade in living organisms and can even be converted to more toxic substances. In view of this, we synthesized iron oxide nanoparticles with good magnetization (70 emu g−1) and 15 nm particle size for the adsorption and photocatalytic degradation of tetracycline. Characterization carried out on the synthesized iron oxides revealed a bandgap of 1.83 eV and an isoelectric point at pH 6.8. The results also showed that the pH of the solution does not directly influence the adsorption of tetracycline. The adsorption isotherm was consistent with the model proposed by Langmuir, having 97 mg g−1 adsorption capacity. Combined with the superparamagnetic behavior, this capacity is advantageous for the magnetic extraction of tetracycline from wastewater. The mechanisms of adsorption were proposed to be hydrogen bonding and n-π interactions. Photocatalytic degradation studies showed that approximately 40% of tetracycline degraded within 60 min of irradiation time with UV/vis light. The kinetics of photodegradation of tetracycline followed the pseudo-first-order mechanism, proceeding through hydroxyl radicals generated under illumination. Moreover, the photogenerated hydrogen peroxide could lead to heterogeneous photo-Fenton processes on the surface of iron oxide nanoparticles, additionally generating hydroxyl and hydroperoxyl radicals and facilitating photodegradation of tetracycline.

Current advances in microalgae-based bioremediation and other technologies for emerging contaminants treatment

Emerging contaminants (EC) have been detected in effluents and drinking water in concentrations that can harm to a variety of organisms. Therefore, several technologies are developed to treat these compounds, either for their complete removal or degradation in less toxic by-products. Some technologies applied to the treatment of EC, such as adsorption, advanced oxidative processes, membrane separation processes, and bioremediation through microalgal metabolism, were identified by thematic maps. In this review, we used a bibliometric software from >1000 articles. These manuscripts, in general, present removals from 0% to 100% for different ECs. This efficiency varies between treatment technologies and the contaminants' physical-chemical properties and their concentration and operational parameters. This review explored the bioremediation of EC through microalgae with greater emphasis. The main mechanisms of action of microalgae in the bioremediation of ECs are biodegradation bioadsorption, and bioaccumulation. Also, physicochemical properties and removal efficiencies of >50 emerging contaminants are presented. Although there are challenges related to the generation of more toxic by-products and economic and environmental viability, these can be minimized with advances in the development of treatment technologies and even through the integration of different techniques to make the treatment of contaminants emerging from environmental media more sustainable.

Fate of antibiotics during membrane separation followed by physical-chemical treatment processes

Membrane separation technology has been widely utilised to obtain clean permeate and concentrated nutrients from biogas digested slurry. However, some antibiotics are frequently found in digested slurry. Antibiotic removal during the steps, including paper filtration (PF), hollow-fibre membrane ultrafiltration (HF), nanofiltration (NF) and reverse osmosis (RO), of combined membrane separation processing (CMP) remain poorly understood. Experiments were performed on a pilot-scale CMP plant to investigate antibiotic transport and rejection efficiencies in CMP products and analyse the antibiotic removal performances of additional treatments. Results showed average relative antibiotic rejection efficiencies of 50%, 83%, 28% and 14% for PF, HF, NF and RO during CMP, respectively. Each CMP product needed additional treatment for antibiotic removal. Antibiotic removal capacity followed the order of fine halloysite > P25 > activated charcoal > coarse halloysite. The average antibiotic removal rates for different CMP products ranged from 73.3% to 99.9%. But antibiotics can only be adsorbed by fine halloysite and must be degraded through other treatments, Thus, P25 has considerable practical importance for the removal of antibiotics, as antibiotics can be degraded during photocatalysis.

A binary MOF of iron and copper for treating ciprofloxacin-contaminated waste water by an integrated technique of adsorption and photocatalytic degradation

A novel MIL 53(Fe–Cu) was synthesized by a solvothermal process. This binary metal organic framework removed ciprofloxacin from waste water.

Bibliometric approach to the perspectives and challenges of membrane separation processes to remove emerging contaminants from water

The presence of contaminants in water is concerning due to the potential impacts on human health and the environment, and ingested contaminants cause harm in various ways. The conventional water treatment systems are not efficient to remove these contaminants. Therefore, novel techniques and materials for the removal of contaminants are increasingly being developed. The separation process using modified membranes can remove these micropollutants; therefore, they have attracted significant research attention. Among the materials used for manufacturing of these membranes, composites based on graphene oxide and reduced graphene oxide are preferred owing to their promising properties, such as mechanical resistance, thermal and chemical stability, antifouling capacity, water permeability, high thermal and electrical conductivity, high optical transmittance and high surface area. Membrane separation processes (MSP) can be used as secondary or tertiary treatment during the supply of wastewater. However, the efficient and accessible applications of these technologies are challenging. This study aims to demonstrate the main concepts of membrane separation processes and their application in the removal of emerging contaminants. This study reports bibliometric mapping, relevant data on studies using membranes as water treatment processes, and their viability in industrial applications. The main challenges and perspectives of these technologies are discussed in detail as well.

Controllable Drug Release Behavior of Polylactic Acid (PLA) Surgical Suture Coating with Ciprofloxacin (CPFX)-Polycaprolactone (PCL)/Polyglycolide (PGA)

Polylactic acid (PLA) surgical suture can be absorbed by human body. In order to avoid surgical site infections (SSIs), the drug is usually loaded on the PLA suture, and then the drug can release directly to the wound. Because the different types of wounds heal at different times, it is needed to control the drug release rate of PLA suture to consistent to the wound healing time. Two biopolymers, polyglycolide (PGA) and polycaprolactone (PCL), were selected as the carrier of ciprofloxacin (CPFX) drug, and then the CPFX-PCL/PGA was coated on the PLA suture. The degradation rate of drug-carrier can be controlled by adjusting the proportion of PCL/PGA, which can regulate the rate of CPFX drug release from PLA suture. The results show that the surface of PLA suture, coating with PCL/PGA, was very rough, which led to increased stitching resistance when we were suturing the wound. These materials, such as the PLA suture, the PCL/PGA carriers and the CPFX drug, were just physically mixed rather than chemically reacted, which was very useful for ensuring the original efficacy of CPFX drug. With the increasing of PCL in the carriers, both the breaking strength and elongation of these un-degraded sutures increased. During degradation, the breaking strength of all sutures gradually decreased, and the more PCL in the coating materials, the longer effective strength-time for the suture. With the increasing of PCL in the drug-carrier, the rate of drug releasing became lower. The drug release mechanism of CPFX-PCL/PGA was a synergistic effect of drug diffusion and PCL/PGA carrier dissolution.

Enhancement of ciprofloxacin degradation in aqueous system by heterogeneous catalytic ozonation

Fluoroquinolones are extensively used in medicine due to their antimicrobial activity. Their presence in water inhibits microorganism activity in conventional wastewater treatment plants. This study aims to evaluate the technical feasibility of applying heterogeneous catalytic ozonation to eliminate ciprofloxacin (CIP) as a representative of fluoroquinolone antibiotics normally present in municipal wastewater discharges. Experiments were conducted in a semi-batch stirred slurry reactor, using 0.7 L of 100 mg L^-1 CIP aqueous solution, at pH 3 and 30 °C. Experimental results show that single ozonation can easily oxidise CIP molecules (68%) within the first 5 min, leading to the generation of refractory oxidation by-products. However, when heterogeneous catalytic ozonation is applied using iron oxide supported on MFI synthetic zeolite, total degradation of CIP is observed at 5 min and a higher mineralisation rate is obtained. A novel sequential process is developed for CIP mineralisation. In a first step, a flash single ozonation is applied and CIP molecules are broken down. Then, a catalytic ozonation step is conducted by adding the Fe/MFI catalyst into the reactor. As a result of catalyst addition, 44% of Total Organic Carbon (TOC) is eliminated within the first 15 min, compared to single ozonation where only 13% of TOC removal is reached in the same time. The application of this sequential process to a real wastewater effluent spiked with CIP leads to 52% of TOC removal.

Physico-chemical processes

The review scans research articles published in 2018 on physico-chemical processes for water and wastewater treatment. The paper includes eight sections, that is, membrane technology, granular filtration, flotation, adsorption, coagulation/flocculation, capacitive deionization, ion exchange, and oxidation. The membrane technology section further divides into six parts, including microfiltration, ultrafiltration, nanofiltration, reverse osmosis/forward osmosis, and membrane distillation. PRACTITIONER POINTS: Totally 266 articles on water and wastewater treatment have been scanned; The review is sectioned into 8 major parts;  Membrane technology has drawn the widest attention from the research community.

Emerging pollutants-Part II: Treatment

Recently, emerging pollutants (EPs) have been frequently detected in urban wastewater, surface water, drinking water, and other water bodies. EPs mainly usually include pharmaceuticals and personal care products, endocrine-disrupting chemicals, antibiotic resistance genes, persistent organic pollutants, disinfection by-products, and other industrial chemicals. The potential threat of EPs to ecosystems and human health has attracted worldwide attention. Therefore, how to treat EPs in various water bodies has become one of the research priorities. In this paper, some research results on treatment of EPs published in 2018 were summarized. PRACTITIONER POINTS: At present, more attention has been paid to emerging pollutants (EPs), including pharmaceuticals and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), antibiotic resistance genes, persistent organic pollutants, disinfection by-products, etc. Existing EPs disposal technologies mainly include: engineered wetlands and natural systems, biological treatment, physical and physicochemical separation, chemical oxidation, catalysis, etc. This paper reviews some research results on the treatment technologies of EPs published in 2018.

Use of alternating current for colored water purification by anodic oxidation with SS/PbO2 and Pb/PbO2 electrodes

This paper suggests a new alternative for the acceleration of dye removal by adopting alternating current instead of direct current in the treatment of methylene blue solutions and industrials effluents, using anodic oxidation on Pb/PbO₂ and stainless steel (SS)/PbO₂ anodes. A comparative study of the influence of electrolyte support (NaCl, NaNO₃, and Na₂SO₄) on the anodic oxidation performance and the anode stability was performed. The best results were obtained in presence of NaCl where the color removal percentage reached about 80.13% and 55.8%, for Pb/PbO₂ anodes, and 89.5% and 60.4% for the SS/PbO₂ anodes for alternating and direct current, respectively. Treatment in alternating current conditions enhanced the removal speed. Atomic absorption analysis confirmed the decrease of the release of (Pb²⁺) ions to much lower values compared with direct current and to those allowed by the Standards. LC/MS and phytotoxicity analyses confirmed the non-toxicity of the generated by-products during the anodic oxidation of methylene blue and the possibility of the reuse of the treated water.

Cetyltrimethylammonium Bromide (CTAB) Bloated Micelles and Merged CTAB/Bolaamphiphiles Self-Assembled Vesicles toward the Generation of Highly Porous Alumina as Efficacious Inorganic Adsorbents

Herein, in a new approach, highly porous alumina materials (HiPAs) have been synthesized through cetyltrimethylammonium bromide (CTAB) bloated micelles or merged CTAB/dicarboxylic acid vesicular aggregates (di-acids with 8, 10, and 12 carbon atoms) as novel templates and characterized by N₂ sorption, low- and wide-angle XRD (X-ray diffraction), FE-SEM (field emission scanning electron microscopy), TEM (transmission electron microscopy), HR-TEM (high-resolution transmission electron microscopy), DLS (dynamic light scattering), and AFM (atomic force microscopy) analyses. In the absence of dicarboxylic acids, CTAB bloated micelles in ethanol-aqueous solutions were conductive to the formation of mesoporous γ-alumina hollow spheres (HiPA-CT) with high surface area (394 m² g^-1) and ultralarge pore volume (1.8 cm³ g^-1). Notably, merged giant vesicular assemblies formed between dicarboxylic acids and CTAB endowed the mesoporous alumina nanoparticle aggregates with tunable and unprecedented pore features (surface area of 415-735 m² g^-1 and ultrahigh pore volume of 1.37-2.57 cm³ g^-1), in which their pinnacle was obtained via CTAB/10 (HiPA-CT-10). Due to the tailored porosity, the HiPA-CT and HiPA-CT-10 were exploited for ciprofloxacin (CIP) adsorption experiments. The adsorption efficiency attained a climax at pH 6. At CIP concentrations below 1 ppm, 91 and 86% of CIP were removed by HiPA-CT and HiPA-CT-10, respectively. The maximum adsorption capacities of HiPA-CT and HiPA-CT-10 are 120 and 184 mg g^-1, respectively, in which the latter is surpassing those of inorganic antibiotic adsorbents reported so far. The kinetic results showed that the removal of CIP by HiPA-CT was faster due to the presence of macropores and more accessible active sites on mesoporous surfaces. The reusability test was acceptable after eight runs. The results signify that these novel materials have high potential for reducing our environmental concerns.

KOH-super activated carbon from biomass waste: Insights into the paracetamol adsorption mechanism and thermal regeneration cycles

A super activated carbon (SAC) was produced by KOH-activation of a biomass waste for paracetamol (PCT) adsorption from aqueous solution and for adsorption-thermal regeneration cycles. The SAC and the regenerated SAC after five adsorption-regeneration cycles (RSAC-5th) were fully characterized by several techniques. The N₂ physisorption showed that the S_BET values of the SAC and RSAC-5th are remarkably different, being 2794 m² g^-1 and 889 m² g^-1, respectively. The XPS analysis demonstrated that the SAC surface is composed by oxygen containing-groups, whilst the RSAC-5th also presents nitrogen ones, provenient from the PCT molecules. The adsorption studies revealed that the maximum adsorption capacity (Q_m) for the SAC (356.22 mg g^-1) is higher than that for RSAC-5th (113.69 mg g^-1). Also, the results demonstrated that the PCT adsorption is governed by both physisorption and chemisorption and the ab initio calculations showed the chemisorption mainly occurs in carboxylic groups.

Membrane-based separation of potential emerging pollutants

The potential emerging pollutants (PEPs) such as hazardous chemicals, toxic metals, bio-wastes, etc., pose a severe threat to human health, hygiene and ecology by way of polluting the environment and water sources. The PEPs are originated from various industrial effluent discharges including pharmaceutical, food and metal processing industries. These PEPs in contact with water may pollute the water and disturb the aquatic life. Innumerable methods have been used for the treatment of effluents and separating the toxic chemicals/metals. Of these methods, membrane-based separation processes (MBSPs) are effective over the conventional techniques for providing clean water from wastewater streams at an affordable cost with minimum energy requirement. Microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), and forward osmosis (FO) methods as well as hybrid technologies are discussed citing the published results of the past decade.

Preparation of CoFe2O4/activated carbon@chitosan as a new magnetic nanobiocomposite for adsorption of ciprofloxacin in aqueous solutions

Ciprofloxacin (CIP) is considered as a biological resistant pollutant. The CoFe₂O₄/activated carbon@chitosan (CoFe₂O₄/AC@Ch) prepared as a new magnetic nanobiocomposite and used for adsorption of CIP. CoFe₂O₄/AC@Ch was characterized by Fourier transform-infrared (FT-IR), field emission scanning electron microscope (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), vibrating-sample magnetometer (VSM), and Brunauer-Emmett-Teller (BET) surface area measurements. The pH_ZPC value of the nanobiocomposite was estimated to be 6.4 by solid addition method. The prepared magnetic nanobiocomposites can be separated easily from water by an external magnet and reused. The effect of CIP concentration (10-30 mg/L), adsorbent dosage (12-100 mg/L), contact time (5-30 min) and pH (3-11) as independent variables on ciprofloxacin removal efficiency was evaluated. Optimum conditions were obtained in CIP concentration: 10 mg/L, adsorbent dosage: 100 mg/L, contact time: 15 min and pH: 5. In this condition, maximum CIP removal was obtained as 93.5%. The kinetic and isotherm equations showed that the process of adsorption followed the pseudo-second order kinetic and Langmuir isotherm. The results indicate that the prepared magnetic nanobiocomposite can be used as good adsorbent for the removal of CIP from aqueous solution and can be also recycled.