A clean approach for functionalized carbon nanotubes by deep eutectic solvents and their performance in the adsorption of methyl orange from aqueous solution

Deep insight into selective adsorption behavior and mechanism of novel deep eutectic solvent functionalized bio-sorbent towards methcathinone: Experiments and DFT calculation

This work designed and synthesized novelly selective, highly efficient and friendly environmental biochar nanomaterial (ZMBC@ChCl-EG) by screening suitable deep eutectic solvent (DES) as the functional monomer via Density Functional Theory (DFT). The prepared ZMBC@ChCl-EG achieved the highly efficient adsorption of methcathinone (MC) and exhibited excellent selectivity as well as good reusability. Selectivity analysis concluded that the distribution coefficient value (K_D) of ZMBC@ChCl-EG towards MC was 3.247 L/g, which was about 3 times higher than that of ZMBC, corresponding to stronger selective adsorption capacity. The studies of isothermal and kinetics indicated that ZMBC@ChCl-EG had an excellent adsorption capacity towards MC and the adsorption was mainly chemically controlled. In addition, DFT was used to calculate the binding energies between MC and each component. The binding energies were -10.57 kcal/mol for ChCl-EG/MC, -3.15∼-9.51 kcal/mol for BCs/MC, -2.33 kcal/mol for ZIF-8/MC, respectively, suggesting that DES played a major role in enhancing methcathinone adsorption. Lastly, the adsorption mechanisms were revealed by variables experiment combined with characterizations and DFT calculation. The main mechanisms were hydrogen bonding and π-π interaction.

Adsorption of amphetamine on deep eutectic solvents functionalized graphene oxide/metal-organic framework nanocomposite: Elucidation of hydrogen bonding and DFT studies

The efficient and selective removal of amphetamine (AMP) from water bodies is significant for environmental remediation. In this study, a novel strategy for screening deep eutectic solvent (DES) functional monomers was proposed based on density functional theory (DFT) calculations. Using magnetic GO/ZIF-67 (ZMG) as substrates, three DES-functionalized adsorbents (ZMG-BA, ZMG-FA, and ZMG-PA) were successfully synthesized. The isothermal results showed that the DES-functionalized materials introduced more adsorption sites and mainly contributed to the formation of hydrogen bonds. The order of the maximum adsorption capacity (Q_m) was as follows: ZMG-BA (732.110 μg⋅g^-1) > ZMG-FA (636.518 μg⋅g^-1) > ZMG-PA (564.618 μg⋅g^-1) > ZMG (489.913 μg⋅g^-1). The adsorption rate of AMP on ZMG-BA was the highest (98.1%) at pH 11, which could be explained by the less protonation of -NH₂ from AMP being more favorable for forming hydrogen bonds with the -COOH of ZMG-BA. The strongest affinity of the -COOH of ZMG-BA for AMP was reflected in the most hydrogen bonds and the shortest bond length. The hydrogen bonding adsorption mechanism was fully explained by experimental characterization (FT-IR, XPS) and DFT calculations. Frontier Molecular Orbital (FMO) calculations showed that ZMG-BA had the lowest HOMO-LUMO energy gap (E_gap), the highest chemical activity and the best adsorption capability. The experimental results agreed with the results of theoretical calculations, proving the validity of the functional monomer screening method. This research offered fresh suggestions for the functionalized modification of carbon nanomaterials to achieve effective and selective adsorption for psychoactive substances.

Comparison between nanocellulose-polyethylenimine composites synthesis methods towards multiple water pollutants removal: A review

Nanocellulose/polyethylenimine composites have attracted growing attention due to their versatility as new materials for application in different fields. Water remediation is one of the traditional applications of these composites and their investigation as adsorbents for single water pollutants is well established. However, most water resources such as rivers, lakes, and even oceans contain complex mixtures of pollutants. Despite several recently published reviews on water purification technology, they only focused on these material as single pollutant removers and hardly mentioned their capacity to simultaneously recover multiple pollutants. Therefore, there is still a gap in the archived literature considering nanocellulose/polyethylenimine composites targeting water remediation with multiple water pollutants. In this review, methods for synthesizing such composites are classified and compared according to the mechanism of reactions, such as chemical crosslinking and physical adsorption, while outlining advantages and limitations. Then, the water pollutants mainly targeted by those composites are discussed in detail to expound the relationship between the synthesis method and the type and adsorption capacity. Finally, the last section presents challenges and opportunities of these nanocellulose/polyethylenimine composites as emerging sorbents for sustainable multiple water pollutants purification technologies. This review aims to lay out the basis for future developments of these composites for multiple water pollutants.

Natural deep eutectic solvent (fructose-glycine) functionalized-celite/ polyethylene glycol hydrogel nanocomposite for phosphate adsorption: Statistical analysis

The increasing usage of phosphate fertilizers for agricultural purposes has led to an augmented level of phosphorus in watercourses negatively impacting the ecosystems and water quality warranting its amputation from polluted water. This article describes the preparation of a novel natural deep eutectic solvent (NADES) functionalized-celite/polyethylene glycol hydrogel nanocomposite (NADES-Cel/PEG HNC) for adsorptive phosphate removal from water. The XRD, FTIR, SEM coupled with EDX spectroscopy, TEM, BET analysis, and pH_pzc measurement were used to characterise the prepared material. Central composite design (CCD) in response surface methodology (RSM) was used for experimental design to analyse the individual and combined impact of five operational parameters on equilibrium adsorption capacity (Q_e), and evaluate the optimal operating conditions by numerical optimization, which were obtained as: contact time (60 min), adsorbent dosage (1.0 g/L), initial [PO₄^3-] (80 mg/L), initial solution pH (3.5), and temperature (304 K). The adsorption process was best explicated via Langmuir adsorption isotherm with a noteworthy saturation capacity, Q_m of 111.80 mg PO₄^3-/g at 298 K, and was favourable (S* = 0.99), feasible (ΔG° = -7.02 kJ/mol), exothermic (ΔH° = -8.39 kJ/mol) and physical in nature. The uptake mechanism largely involved H-bonding, electrostatic interaction, n-π interaction and pore-filling. Uptake kinetics of PO₄^3- was best explicated by pseudo-second order model, and the rate-determining step involved both intraparticle and liquid film diffusion mechanisms. The admirable performance of NADES-Cel/PEG HNC was signified by its competent adsorption efficacy and effectual reusability. The pertinence of the hydrogel nanocomposite for treatment of real wastewater was tested. Hence, NADES-Cel/PEG HNC might prove to be a pragmatic adsorbent for decontamination of PO₄^3- from an aqueous environment.

Electrochemical degradation and mineralisation of organic dyes in aqueous nitrate solutions

Electrochemical treatment of organic matter for environmental remediation necessitates the development of cheap and robust electrodes that are chemically and structurally stable. To address this challenging requirement, we demonstrate a new electrochemical approach using a simple copper electrode under cathodic conditions to electrochemically generate reactive nitrosonium ions for the degradation of different classes of synthetic organic dyes. This could be achieved in an aqueous HNO₃/KNO₃ electrolyte at a relatively low cathodic potential of -0.5 V RHE at room temperature. UV-visible absorption spectroscopy, Raman spectroscopy, liquid chromatography - mass spectrometry and total organic carbon measurements revealed the rapid decolorisation and mineralisation of several dye types such as triarylmethane dyes (crystal violet, cresol red), an azo dye (methyl orange) as well as a sulfur containing thiazine dye (toluidine blue). The total organic carbon content of a 50 mg L^-1 methyl orange solution was found to decrease by 83% after 1 h of electrolysis. Promisingly, locally sourced river and creek water samples spiked with 50 mg L^-1 methyl orange were also successfully treated for up to 6 cycles at a simple Cu electrode, demonstrating potential for the remediation of polluted waterways.

Modification of Poly(vinylidene fluoride-co-hexafluoropropylene) Membranes with DES-Functionalized Carbon Nanospheres for Removal of Methyl Orange by Membrane Distillation

Chemical pollutants, such as methyl orange (MO), constitute the main ingredients in the textile industry wastewater, and specifically, the dyeing process. The use of such chemicals leads to huge quantities of unfixed dyes to make their way to the water effluent and consequently escalates the water pollution problem. This work investigates the incorporation of hydrophobic carbon nanospheres (CNS) prepared from the pyrolysis of acetylene using the chemical vapor deposition technique with poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) in order to enhance its hydrophobicity. Moreover, a deep eutectic solvent (DES) was used to enhance the membrane’s porosity. The former was based on the quaternary ammonium salt (N,N-diethyl-ethanol-ammonium chloride) as a chemical addition throughout the membrane synthesis. Direct contact membrane distillation (DCMD) was employed to assess the performance of the modified membrane for treatment of MO contaminated water. The phase inversion method was used to embed various contents of CNS (i.e., 1.0, 3.0, and 5.0 wt.%) with 22:78 wt.% of PVDF-co-HFP/N-Methyl-2-pyrrolidone solution to prepare flat-sheet membranes. The membrane embedded with 5 wt.% CNS resulted in an increase in membrane hydrophobicity and presented considerable enhancement in DCMD permeation from 12 to 35 L/h.m2 with salt rejection >99.9%. Moreover, the composite membrane showed excellent anti-biofouling and mechanical characteristics as compared to the pristine counterpart. Using this membrane, a complete rejection of MO was achieved due to the synergistic contribution of the dye negative charge and the size exclusion effect.

Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review

The concentrations of heavy metal ions found in waterways near industrial zones are often exceed the prescribed limits, posing a continued danger to the environment and public health. Therefore, greater attention has been devoted into finding the efficient solutions for adsorbing heavy metal ions. This review paper focuses on the synthesis of carbon nanotubes (CNTs) from biomass and their application in the removal of heavy metals from aqueous solutions. Techniques to produce CNTs, benefits of modification with various functional groups to enhance sorption uptake, effects of operating parameters, and adsorption mechanisms are reviewed. Adsorption occurs via physical adsorption, electrostatic interaction, surface complexation, and interaction between functional groups and heavy metal ions. Moreover, factors such as pH level, CNTs dosage, duration, temperature, ionic strength, and surface property of adsorbents have been identified as the common factors influencing the adsorption of heavy metals. The oxygenated functional groups initially present on the surface of the modified CNTs are responsible towards the adsorption enhancement of commonly-encountered heavy metals such as Pb²⁺, Cu²⁺, Cd²⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Cr⁶⁺. Despite the recent advances in the application of CNTs in environmental clean-up and pollution treatment have been demonstrated, major obstacles of CNTs such as high synthesis cost, the agglomeration in the post-treated solutions and the secondary pollution from chemicals in the surface modification, should be critically addressed in the future studies for successful large-scale applications of CNTs.

Cobalt-Carbon Nanoparticles with Silica Support for Uptake of Cationic and Anionic Dyes from Polluted Water

Silica-supported hierarchical graphitic carbon sheltering cobalt nanoparticles Co-HGC@SiO2 (1) were prepared by pyrolysis at 850 °C of [Co(phen)(H2O)4]SO4·2H2O complex with silica in the presence of pyrene as a carbon source under nitrogen atmosphere. Nanocomposites (2) and (3) were obtained by acid treatment of (1) with HCl and HF acid, respectively. The nanocomposites showed rough hierarchical carbon microstructures over silica support decorated with irregular cobalt nanospheres and nanorods 50 to 200 nm in diameter. The nanoparticles consist of graphitic shells and cobalt cores. SEM, EDAX and TEM elemental mapping indicate a noticeable loss of cobalt in the case of (2) and loss of cobalt and silica in the case of (3) with an increase in porosity. Nanocomposite (3) showed the highest BET surface area 217.5 m2g-1. Raman spectrum shows defect D-band and graphitic G-band as expected in carbon nanostructures. PXRD reveals the presence of cobalt(0) nanoparticles. XPS indicates the presence of Co(II) oxides and the successful doping of nitrogen in the nanocomposites. Moreover, TEM elemental mapping provides information about the abundance of Si, Co, C, N and S elements in zones. Nanocomposite (1) showed maximum uptake capacity of 192.3 and 224.5 mg/g for crystal violet CV and methyl orange MO dyes, respectively. Nanocomposite (2) showed a capacity of 94.1 and 225.5 mg/g for CV and MO dyes, respectively. Nanocomposite (4) obtained after treatment of (1) with crystal violet proved successful adsorption of CV. Co-HGC (5) prepared without addition of silica has a capacity for CV equal to 192 mg/g, while it is 769.2 mg/g with MO. Electrostatics and π-π interactions of graphite and cobalt species in the nanocomposites with aromatic rings of cationic and anionic dyes are responsible for the adsorption. Yan et al. was the best model to describe column kinetics. The thomas column adsorption model showed that the maximum uptake capacity of (1) was 44.42 mg/g for CV and 32.62 mg/g for MO. for a column packed with 0.5 gm of (1) and dye concentration of 100 mg/L at a flow rate of 1 mL/min. The column was recycled three times with no noticeable clogging or degradation of nanocomposites. Thus, Co-HGC@SiO2 adsorbents can be used efficiently to treat water contaminated with cationic and anionic dyes.

Deep Eutectic Solvents (DESs) and Their Application in Biosensor Development

Deep Eutectic Solvents (DESs) are a new class of solvents characterized by a remarkable decrease in melting point compared to those of the starting components. The eutectic mixtures can be simply prepared by mixing a Hydrogen Bond Acceptor (HBA) with a Hydrogen Bond Donor (HBD) at a temperature of about 80 °C. They have found applications in different research fields; for instance, they have been employed in organic synthesis, electrochemistry, and bio-catalysis, showing improved biodegradability and lower toxicity compared to other solvents. Herein, we review the use of DESs in biosensor development. We consider the emerging interest in different fields of this green class of solvents and the possibility of their use for the improvement of biosensor performance. We point out some promising examples of approaches for the assembly of biosensors exploiting their compelling characteristics. Furthermore, the extensive ability of DESs to solubilize a wide range of molecules provides the possibility to set up new devices, even for analytes that are usually insoluble and difficult to quantify.

Instantaneous Adsorption of Synthetic Dyes from an Aqueous Environment Using Kaolinite Nanotubes: Equilibrium and Thermodynamic Studies

Innovative kaolinite nanotubes (KNTs) are synthesized utilizing a simple technique involving a sonication-induced exfoliation process, followed by chemical scrolling reactions. The KNTs as a material have high reactivity and promising surface area to be used in the purification of water from cationic dyes (safranin (SF) and malachite green (MG)) and anionic dyes (methyl orange (MO) and Congo red (CR)). The kinetic studies of the four dyes SF, MG, CR, and MO show an equilibration time interval of 240 min. The SF, MG, CR, and MO dyes' uptake reactions are in agreement with the kinetic behavior of the pseudo-first-order model and the equilibrium properties of the Langmuir model. Such modeling results, in addition to the Gaussian energies from the Dubinin-Radushkevich (D-R) model (SF (1.01 kJ/mol), MG (1.08 kJ/mol), CR (1.11 kJ/mol), and MO (1.65 kJ/mol)), hypothesize monolayer adsorption of the four dyes by physical reactions. The KNTs show theoretical q max values of 431.6, 489.9, 626.2, and 675.5 (mg/g) for SF, MG, CR, and MO, respectively. The thermodynamic examination of SF, MG, CR, and MO adsorption reactions using KNTs verifies their adsorption by exothermic and spontaneous reactions. The KNT adsorbents achieve promising adsorption results in the presence of different coexisting ions and show significant recyclability properties. Therefore, the production of KNTs from kaolinite shows a strong effect on inducing the textural, physicochemical, and adsorption properties of clay layers as well as their affinity for different species of synthetic dyes.

Synthesis, Characterization, and Analysis of Hybrid Carbon Nanotubes by Chemical Vapor Deposition: Application for Aluminum Removal

Hybrid carbon nanotubes (CNTs) are grown on biomass powder-activated carbon (bio-PAC) by loading iron nanoparticles (Fe) as catalyst templates using chemical vapor deposition (CVD) and using acetylene as carbon source, under specific conditions as reaction temperature, time, and gas ratio that are 550 °C, 47 min, and 1, respectively. Specifications of hybrid CNTs were analyzed and characterized using field emission scanning electron microscope (FESEM) with energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopic (TEM), Fourier-transform infrared (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), surface area Brunauer-Emmett-Teller (BET), and zeta potential. The results revealed the high quality and unique morphologies of hybrid CNTs. Furthermore, removal and capacity of Al3+ were optimized by response surface methodology (RSM). However, the results revealed that the pseudo-second-order model well represented adsorption kinetic data, while the isotherm data were effectively fitted using a Freundlich model. The maximum adsorption capacity was 347.88 mg/g. It could be concluded that synthesized hybrid CNTs are a new cost-effective and promising adsorbent for removing Al3+ ion from wastewater.

Current Trends in the Application of Nanomaterials for the Removal of Emerging Micropollutants and Pathogens from Water

Water resources contamination has a worldwide impact and is a cause of global concern. The need for provision of clean water is becoming more and more demanding. Nanotechnology may support effective strategies for the treatment, use and reuse of water and the development of next-generation water supply systems. The excellent properties and effectiveness of nanomaterials make them particularly suitable for water/wastewater treatment. This review provides a comprehensive overview of the main categories of nanomaterials used in catalytic processes (carbon nanotubes/graphitic carbon nitride (CNT/g-C₃N₄) composites/graphene-based composites, metal oxides and composites, metal–organic framework and commercially available nanomaterials). These materials have found application in the removal of different categories of pollutants, including pharmaceutically active compounds, personal care products, organic micropollutants, as well as for the disinfection of bacterial, viral and protozoa microbial targets, in water and wastewater matrices. Apart from reviewing the characteristics and efficacy of the aforementioned nanoengineered materials for the removal of different pollutants, we have also recorded performance limitations issues (e.g., toxicity, operating conditions and reuse) for their practical application in water and wastewater treatment on large scale. Research efforts and continuous production are expected to support the development of eco-friendly, economic and efficient nanomaterials for real life applications in the near future.

The Application of Carbon Nanotube/Graphene-Based Nanomaterials in Wastewater Treatment

The treatment of organic wastewater is of great significance. Carbon nanotube (CNT)/graphene-based nanomaterials have great potential as absorbent materials for organic wastewater treatment owing to their high specific surface area, mesoporous structure, tunable surface properties, and high chemical stability; these attributes allow them to endure harsh wastewater conditions, such as acidic, basic, and salty conditions at high concentrations or at high temperatures. Although a substantial amount of work has been reported on the performance of CNT/graphene-based nanomaterials in organic wastewater systems, engineering challenges still exist for their practical application. Herein, the adsorption mechanism of CNT- and graphene-based nanomaterials is summarized, including the adsorption mechanism of CNTs and graphene at the atomic and molecular levels, their hydrophilic and hydrophobic surface properties, and the structure-property relationship required for adsorption to occur. Second, the structural modification and recombination methods of CNT- and graphene-based adsorbents for various organic wastewater systems are introduced. Third, the engineering challenges, including the molding of macroscopically stable adsorbents, adsorption isotherm models and adsorption kinetic behaviors, and reversible adsorption performance compared to that of activated carbon (AC) are discussed. Finally, cost issues are discussed in light of scalable and practical application of these materials.

CNTs synthesized with polyoxometalate-based metal–organic compounds as catalyst precursors via the CVD method and their adsorption performance towards organic dyes

CNTs were synthesized with POM-based compounds as catalyst precursors via the CVD method, and they possess a high adsorption capacity towards organic dyes.