Biochar filters as an on-farm treatment to reduce pathogens when irrigating with wastewater-polluted sources

Biochar-based fixed filter columns for water treatment: A comprehensive review

Biochar used in fixed filter columns (BFCs) has garnered significant attention for its capabilities in material immobilization and recovery, filtration mechanisms, and potential for scale-up, surpassing the limitations of batch experiments. This review examines the efficacy of biochar in BFCs, either as the primary filtering material or in combination with other media, across various wastewater treatment scenarios. BFCs show high treatment efficiency, with an average COD removal of 80 % ±15.3 % (95 % confidence interval: 72 %, 86 %). Nutrient removal varies, with nitrogen-ammonium and phosphorus-phosphate removal averaging 71 ± 17.1 % (60 %, 80 %) and 57 % ± 25.6 % (41 %, 74 %), respectively. Pathogen reduction is notable, averaging 2.4 ± 1.12 log10 units (1.9, 2.9). Biochemical characteristics, pollutant concentrations, and operational conditions, including hydraulic loading rate and retention time, are critical to treatment efficiency. The pyrolysis temperature (typically 300 to 800 °C) and duration (1.0 to 4.0 h) influence biochar's specific surface area (SSA), with higher temperatures generally increasing SSA. This review supports the biochar application in wastewater treatment and guides the design and operation of BFCs, bridging laboratory research and field applications. Further investigation is needed into biochar reuse as a fertilizer or energy source, along with research on BFC models under real-world conditions to fully assess their efficacy, service life, and costs for practical implementation.

Scenario-based assessment of fecal pathogen sources affecting bathing water quality: novel treatment options to reduce norovirus and Campylobacter infection risks

Wastewater discharge and runoff waters are significant sources of human and animal fecal microbes in surface waters. Human-derived fecal contamination of water is generally estimated to pose a greater risk to human health than animal fecal contamination, but animals may serve as reservoirs of zoonotic pathogens. In this study, quantitative microbial risk assessment (QMRA) tools were used to evaluate the hygienic impact of sewage effluents and runoff water from municipalities and animal farms on surface and bathing waters. The human-specific microbial source tracking (MST) marker HF183 was used to evaluate the dilution of fecal pathogens originating from the sewage effluent discharge to the downstream watershed. As novel risk management options, the efficiency of UV-LED disinfection and wetland treatment as well as biochar filtration was tested on-site for the contamination sources. According to the dilution pattern of the MST marker HF183, microbes from wastewater were diluted (2.3-3.7 log10) in the receiving waters. The scenario-based QMRA revealed, that the health risks posed by exposure to human-specific norovirus GII and zoonotic Campylobacter jejuni during the bathing events were evaluated. The risk for gastroenteritis was found to be elevated during wastewater contamination events, where especially norovirus GII infection risk increased (1-15 cases per day among 50 bathers) compared with the business as usual (BAU) situation (1 case per day). The noted C. jejuni infection risk was associated with animal farm contamination (1 case per day, versus 0.2-0.6 cases during BAU). Tertiary treatment of wastewater with wetland treatment and UV-LED disinfection effectively reduced the waterborne gastroenteritis risks associated with bathing. Based on the experiences from this study, a QMRA-based approach for health risk evaluations at bathing sites can be useful and is recommended for bathing site risk assessments in the future. In case of low pathogen numbers at the exposure sites, the MST marker HF183 could be used as a pathogen dilution coefficient for the watershed under evaluation. The full-scale implementation of novel tertiary treatment options at wastewater treatment plants (WWTPs) as well as on-site runoff water treatment options should be considered for infection risk management at locations where scenario-based QMRA implies elevated infection risks.

Challenges and opportunities for the production, utilization and effects of biochar in cold-region agriculture

Cold regions are part of the earth's system characterized by the presence of snow and ice for at least part of the year. Many biochar applications in cold-regions agricultural sectors have been reported in China, Canada, Demark, Finland, Norway, Russia, Sweden, etc. The objective of this study was thus to comprehensively examine the previous studies of cold-region biochar technologies and their socio-economic and environmental benefits. This literature review showed that woody biochar from pine and spruce were common feedstocks with pyrolysis temperature of 550- 600 °C. 1 % and 28 t ha-1 biochar in field showed better results of promoting yield enhancement. It displayed a long-term benefit with massive economic gains and ecosystem. Moreover, the mechanism and effect of biochar were studied that instead of short-term application, a long-term application of biochar gradually improved the soil condition and generated long-term benefits due to the biochar-assisted enhancement of local ecosystem, such as improved cold-resistance of microbes and plants, promoted N uptakes, stimulated biological activities, and facilitated rhizosphere interactions. However, it should not be ignored that a short-term application could cause decline in nutrient uptake, decrease in immobilization, and trivial soil enhancement, showing an insignificant or harmful influence on the field. Though biochar generally had positive long-term effects on the field, possible influences need to be further explored to generate a best view for cold-region application of biochar with the consideration of impacts from short-term and long-term effects.

Biomass based biochar production approaches and its applications in wastewater treatment, machine learning and microbial sensors

Biochar is a stable carbonaceous material derived from various biomass and can be utilized as adsorbents, catalysts and precursors in various environmental applications. This review discusses various feedstock materials and methods of biochar production via traditional as well as modern approaches. Additionally, the biochar characteristics, HTC process, and its modification by employing steam and gas purging, acidic, basic / alkaline and organo-solvent, electro- and magnetic fields have been discussed. The recent biochar applications for real water, wastewater and industrial wastewater for the abstraction of environmental contaminants also reviewed. Moreover, applications in machine learning and microbial sensors were discussed. In the meantime, analyses on commercial and environmental profit, current ecological concerns and the future directions of biochar application have been well presented.

Fixed-bed biofilter for polluted surface water treatment using chitosan impregnated-coconut husk biochar

Pelletizing biochar enables its use as a biofilter medium for polluted canal water treatment. Coconut husk biochar pellets and their modification with chitosan (CHC) were compared with conventional activated carbon pellets and gravel. The biofilter columns with these media were operated with a hydraulic loading rate of 0.1 m3/m2∙h. CHC showed the highest potential to reduce phosphate and nitrogen, via the adsorption process in the first week of filtration and later enhanced by biodegradation, to achieve removal efficiencies of 61.70 and 54.37% for these two key nutrients, respectively, over five weeks of biofilter operation. The predominant bacteria in the biofilter communities were characterized at the end of the experiments by next generation sequencing and quantitative polymerase chain reaction analysis. The biofilter communities included ammonium oxidizing, nitrite oxidizing, denitrifying, polyphosphate accumulating and denitrifying phosphate-accumulating bacteria that benefit nutrient removal. The CHC biofilter also effectively removed micropollutants, including pharmaceuticals.

Biochar and flow interruption control spatio-temporal dynamics of fecal coliform retention under subsurface drip irrigation

Applying wastewater in subsurface drip irrigation helps address water shortage in arid and semi-arid environments. Microbial contamination may result, but soil amendments such as biochar could help protect soil and water resources. To improve understanding, this study investigated spatio-temporal dynamics of fecal coliform retention in a biochar-treated soil under subsurface drip irrigation. Two dripper discharges rates of 2 and 4 l hr^-1 containing fecal coliforms (3.99 ± 1.4 × 10⁵ CFU ml^-1), three maximum allowable depletion levels (MAD; 30, 50, and 70%), and three biochar levels (0, 0.5 and 1%, w/w) were used. The lysimeters were filled with biochar-treated soil and had drippers located at 20 cm depth. Three irrigations were performed for either Q, and soil samples were taken after each irrigation at different times at the lysimeter centre at 5, 15, 25, and 50 cm depths and at the edge at 20 cm depth (labeled 20 L). Soils containing biochar had much greater recovered coliforms from soil than the unamended controls. The greatest retention was at 15 and 25 cm depth (within 5 cm of the dripper) for 1% biochar, with the recovered cells about 70% for 2 l hr^-1 discharge and 60% for 4 l hr^-1 discharge. The greatest concentration occurred immediately after irrigation, but over 10 days the number of coliforms gradually decreased and inactivated. Therefore, the coliform residence time, soil depth, and biochar rate all influenced coliform retention if the discharge rates and MADs were considered. We recommend slower subsurface dripper rates with high MAD and biochar amendment to minimize fecal coliform contamination from subsurface field wastewater irrigation.

Emerging nanotechnology based advanced techniques for wastewater treatment

The increasing trend of industrialization leads to tremendous release of industrial effluents. Waste water treatment is one of the important sectors to focus in order to overcome the most threatening issue of waste disposal and to ensure sustainability. Sustainable and energy efficient treatment methods are the attractive technologies for their current implementation of waste management. Even though the existing technologies are effective, unsustainability makes them unfit for their extended applications. Conventional and advanced technologies have been extensively implemented for the treatment of wide spectrum of effluents. Hybrid technologies including chemical and biological methods also emerging as promising technologies but secondary sludge generation is still unaddressed. Even though effectiveness of biochar varies over type of contaminants, cost-effectiveness and eco-friendly nature extended their applications in waste management. Nanotechnology and membrane technology are the promising and emerging areas of interest due to their widespread applications in waste water treatment. Carbon nano structures, nano filters, graphene, nano magnets modified with activated carbon are the potential candidates for the treatment. The present review demonstrates the emerging treatment technologies with special focus to nano based waste water treatment methods.

Hydrothermal Conversion of Waste Biomass from Greenhouses into Hydrochar for Energy, Soil Amendment, and Wastewater Treatment Applications

Solid hydrochar (HC) produced by hydrothermal carbonization (HTC) of tomato plant biomass from a greenhouse (GH) was assessed for different inhouse applications, including fuel, seed germination, and leached GH nutrient feed (GNF) wastewater treatment. Completed experiments showed encouraging results. HC was revealed to be an efficient renewable fuel, having peat-like characteristics with high heating value of about 26.0 MJ/kg and very low clinker forming potential. This would allow the use of HC as fuel for GH heating as a substitute to costly natural gas, or it could be commercialized after pelletizing. Experiments with soil application showed substantial potential for the produced HC in better seed germination of tomato plants. Another benefit from use of the produced HC is as a soil additive, which would also contribute to environmental emission reduction. Results suggest that the generated HC can remove about 6–30% of nutrients from leached-GNF wastewater. This would be an essential treatment in the reduction of nutrients from leached water from GH operations, and thus could prevent/reduce eutrophication. The exhausted HC after treatment application could then be reused for soil remediation. Overall, the paper highlights the potential applications of hydrothermal treatment in valorization of low-valued GH TPB waste, resulting in a circular economy.

Biochar application in biofiltration systems to remove nutrients, pathogens, and pharmaceutical and personal care products from wastewater

Although conventional on-site wastewater treatment systems (OWTSs) provide only primary treatment of domestic wastewater, removal of a limited level of nutrients (N, P), pathogens, and pharmaceuticals and personal care products (PPCPs) could be achieved by such a treatment process. Biochar has the capacity to remove various contaminants and has been widely used as an ideal soil amendment in agriculture due to its persistence, superior nutrient-retention properties, low cost, and ready availability. However, few applications on the use of biochar in onsite wastewater treatment have been explored. In this review, we systematically reviewed the applications of biochar in filtration-based OWTSs for nutrient (N, P) removal and recovery as well as pathogen and PPCP removal. Although adsorption was the main mechanism for P, pathogen, and PPCP removal, biochar can also serve as the growth media for enhanced biological degradation, improves available alkalinity, and increases water holding capacity in the OWTSs. The biochar source, surface modification methods, and preparation procedures (e.g., pyrolysis temperature change) have significant effects on contaminant removal performance in biochar-amended OWTSs. Specifically, contradictory results have been reported on the effect of pyrolysis temperature change on biochar removal performance (i.e., increased, decreased, or no change) of N, P, and PPCPs. Wastewater composition and environmental pH also play important roles in the removal of nutrients, pathogens, and PPCPs. Overall, biochar holds great potential to serve as an alternative filtration material or to be amended to the current OWTS to improve system performance in removing a variety of contaminants at low cost.

Animal carcass burial management: implications for sustainable biochar use

This review focuses on existing technologies for carcass and corpse disposal and potential alternative treatment strategies. Furthermore, key issues related to these treatments (e.g., carcass and corpse disposal events, available methods, performances, and limitations) are addressed in conjunction with associated environmental impacts. Simultaneously, various treatment technologies have been evaluated to provide insights into the adsorptive removal of specific pollutants derived from carcass disposal and management. In this regard, it has been proposed that a low-cost pollutant sorbent may be utilized, namely, biochar. Biochar has demonstrated the ability to remove (in)organic pollutants and excess nutrients from soils and waters; thus, we identify possible biochar uses for soil and water remediation at carcass and corpse disposal sites. To date, however, little emphasis has been placed on potential biochar use to manage such disposal sites. We highlight the need for strategic efforts to accurately assess biochar effectiveness when applied towards the remediation of complex pollutants produced and circulated within carcass and corpse burial systems.

The role of soils in regulation of freshwater and coastal water quality

Water quality regulation is an important ecosystem service function of soil. In this study, the mechanism by which soil regulates water quality was reviewed, and the effects of soil management on water quality were explored. A scientometrics analysis was also conducted to explore the research fields and hotspots of water quality regulation of soil in the past 5 years. This review found that the pollutants entering the soil can be mitigated by precipitation, adsorption and desorption, ion exchange, redox and metabolic decomposition. As an optimal substrate, soil in constructed wetlands has perfect performance in the adsorption and passivation of pollutants such as nitrogen, phosphorus and heavy metals in water, and degradation of pesticides and emerging contaminants. Mangrove wetlands play an important role in coastal zone protection and coastal water quality restoration. However, the excessive application of agricultural chemicals causes soil overload, which leads to the occurrence of agricultural non-point source pollution. Under the dual pressures of climate change and food insecurity in the future, developing environmentally friendly and economically feasible sustainable soil management measures is crucial for maintaining the water purification function of soil by relying on the accurate quantification of soil function based on big data and modelling. This article is part of the theme issue 'The role of soils in delivering Nature's Contributions to People'.

Mitigation of emerging pollutants and pathogens in decentralized wastewater treatment processes: A review

Emerging pollutants (such as micropollutants, microplastics) and pathogens present in wastewater are of rising concern because their release can affect the natural environment and drinking water resources. In this decade, with increasing numbers of small-scale decentralized wastewater systems globally, the status of emerging pollutant and pathogen mitigation in the decentralized wastewater treatment processes has received more attention. This state-of-the-art review aims to discuss the mitigation efficiencies and mechanisms of micropollutants, microplastics, and pathogens in single-stage and hybrid decentralized wastewater treatment processes. The reviewed results revealed that hybrid wastewater treatment facilities could display better performance compared to stand-alone facilities. This is because the multiple treatment steps could offer various microenvironments, allowing incorporating several mitigation mechanisms (such as sorption, degradation, filtration, etc.) to remove complicated emerging pollutants and pathogens. The factors (such as system operation conditions, environmental conditions, wastewater matrix) influencing the removals of emerging pollutants from wastewater in these systems have been further identified. Nevertheless, it was found that very limited research work focused on synergised or conflicted effects of operation conditions on various emerging pollutants naturally present in the wastewater. Meanwhile, effective, reliable, and rapid analysis of the emerging pollutants and pathogens in the complicated wastewater matrix is still a major challenge.

Removal of Pathogens in Onsite Wastewater Treatment Systems: A Review of Design Considerations and Influencing Factors

Conventional onsite wastewater treatment systems (OWTSs) could potentially contribute to the transmission of infectious diseases caused by waterborne pathogenic microorganisms and become an important human health concern, especially in the areas where OWTSs are used as the major wastewater treatment units. Although previous studies suggested the OWTSs could reduce chemical pollutants as well as effectively reducing microbial contaminants from onsite wastewater, the microbiological quality of effluents and the factors potentially affecting the removal are still understudied. Therefore, the design and optimization of pathogen removal performance necessitate a better mechanistic understanding of the hydrological, geochemical, and biological processes controlling the water quality in OWTSs. To fill the knowledge gaps, the sources of pathogens and common pathogenic indicators, along with their major removal mechanisms in OWTSs were discussed. This review evaluated the effectiveness of pathogen removal in state-of-art OWTSs and investigated the contributing factors for efficient pathogen removal (e.g., system configurations, filter materials, environmental and operational conditions), with the aim to guide the future design for optimized treatment performance.

Recent advances in biochar application for water and wastewater treatment: a review

In the past decade, researchers have carried out a massive amount of research on the application of biochar for contaminants removal from aqueous solutions. As an emerging sorbent with great potential, biochar has shown significant advantages such as the broad sources of feedstocks, easy preparation process, and favorable surface and structural properties. This review provides an overview of recent advances in biochar application in water and wastewater treatment, including a brief discussion of the involved sorption mechanisms of contaminants removal, as well as the biochar modification methods. Furthermore, environmental concerns of biochar that need to be paid attention to and future research directions are put forward to promote the further application of biochar in practical water and wastewater treatment.

Biochar drives microbially-mediated rice production by increasing soil carbon

The effects of an on-site biomass (rice straw) equivalent biochar-returning strategy (RSC) on rice yield, soil nutrients and bacterial community composition were examined in a four-year field trial (2013-2016) conducted in a paddy field in south China. Three treatments were set up including annual on-site biomass return (RS, rice straw at 8 t ha^-1 yr^-1), annual on-site biomass equivalent biochar-return (RSC, rice straw biochar at 2.8 t ha^-1 yr^-1 with a 35 % carbonization rate) and control (CK, no rice straw or biochar added). Results showed that a low rate of biochar application (RSC) could significantly increase rice yield in four successive years. The increase in rice yield was mainly attributed to the increase in soil potassium and magnesium contents resulting from the presence of the unique surface functional groups of biochar. As a result of biochar amendment, soil bacterial cooperative relationships were improved in the RSC, compared to those in the RS treatment. Our study indicated that RSC might be promoted as a promising strategy to enhance rice productivity and soil fertility in a sustainable way.

Reactive Barriers for Renaturalization of Reclaimed Water during Soil Aquifer Treatment

Managed aquifer recharge (MAR) is known to increase available water quantity and to improve water quality. However, its implementation is hindered by the concern of polluting aquifers, which might lead to onerous treatment and regulatory requirements for the source water. These requirements might make MAR unsustainable both economically and energetically. To address these concerns, we tested reactive barriers laid at the bottom of infiltration basins to enhance water quality improvement during soil passage. The goal of the barriers was to (1) provide a range of sorption sites to favor the retention of chemical contaminants and pathogens; (2) favor the development of a sequence of redox states to promote the degradation of the most recalcitrant chemical contaminants; and (3) promote the growth of plants both to reduce clogging, and to supply organic carbon and sorption sites. We summarized our experience to show that the barriers did enhance the removal of organic pollutants of concern (e.g., pharmaceuticals and personal care products). However, the barriers did not increase the removal of pathogens beyond traditional MAR systems. We reviewed the literature to suggest improvements on the design of the system to improve pathogen attenuation and to address antibiotic resistance gene transfer.

Combined Vertical-Horizontal Flow Biochar Filter for Onsite Wastewater Treatment—Removal of Organic Matter, Nitrogen and Pathogens

This study investigated the performance of a combined vertical-horizontal flow biochar filter (VFF-HFF) system in terms of organic matter, total nitrogen (Tot-N), Escherichia coli and Salmonella removal and explored the effects of hydraulic loading rate (HLR) on pollutant removal. The combined VFF-HFF system used biochar as the filter medium and comprised two stacked sections: (i) an aerobic vertical flow filter (VFF) in which the wastewater percolated through the biochar medium in unsaturated mode and (ii) a horizontal flow filter (HFF), in which the biochar was saturated with water and had limited access to air, to enable anaerobic conditions and enhance the denitrification process. The system was tested over 126 weeks using real wastewater applied at different HLR (23, 31, 39 L m−2 day−1). The results showed that long-term removal of organic matter in the entire system was 93 ± 3%, with most (87 ± 5%) occurring in the VFF. For Tot-N, the long-term removal was 71 ± 12%, with increasing trends for nitrification in the VFF and denitrification in the HFF. Mean long-term nitrification efficiency in the VFF was 65 ± 15% and mean long-term denitrification efficiency in the HFF 49 ± 14%. Increasing HLR from 23 to 31 L m−2 day−1 increased the nitrification efficiency from 42 to 61%. Increasing the HLR further to 39 L m−2 day−1 decreased the denitrification efficiency from 45 to 25%. HLR had no significant effects on VFF and HFF performance in terms of E. coli and Salmonella removal, although the VFF achieved a 1.09–2.1 log10 unit reduction and the HFF achieved a 2.48–3.39 log10 unit reduction. Thus, long-term performance, i.e., removal of pollutants measured during the last 52 weeks of the experiment, was satisfactory in terms of organic matter and nitrogen removal, with no signs of clogging, indicating good robustness of the combined VFF-HFF biochar filter system.