Enhanced electrochemical phosphate recovery from livestock wastewater by adjusting pH with plant ash

Simultaneous removal of ammonium, phosphate, and phenol via self-assembled biochar composites CBCZrOFe3O4 and its utilization as soil acidity amelioration

ABSTRACTHigh concentrations of ammonium, phosphate, and phenol are recognized as water pollutants that contribute to the degradation of soil acidity. In contrast, small quantities of these nutrients are essential for soil nutrient cycling and plant growth. Here, we reported composite materials comprising biochar, chitosan, ZrO, and Fe3O4, which were employed to mitigate ammonium, phosphate, and phenol contamination in water and to lessen soil acidity. Batch adsorption experiments were conducted to assess the efficacy of the adsorbents. Initially, comparative studies on the simultaneous removal of NH4, PO4, and phenol using CB (biochar), CBC (biochar + chitosan), CBCZrO (biochar + chitosan + ZrO), and CBCZrOFe3O4 (biochar + chitosan + ZrO + Fe3O4) were conducted. The results discovered that CBCZrOFe3O4 exhibited the highest removal percentage among the adsorbents (P < 0.05). Adsorption data for CBCZrOFe3O4 were well fitted to the second-order kinetic and Freundlich isotherm models, with maximum adsorption capacities of 112.65 mg/g for NH4, 94.68 mg/g for PO4 and 112.63 mg/g for phenol. Subsequently, the effect of CBCZrOFe3O4-loaded NH4, PO4, and phenol (CBCZrOFe3O4-APP) on soil acidity was studied over a 60-day incubation period. The findings showed no significant changes (P < 0.05) in soil exchangeable acidity, H+, Mg, K, and Na. However, there was a substantial increase in the soil pH, EC, available P, CEC, N-NH4, and N-NO3. A significant reduction was also observed in the available soil exchangeable Al and Fe (P < 0.05). This technique demonstrated multi-functionality in remediating water pollutants and enhancing soil acidity.

Performance of carbon felt as cathodes in magnesium corrosion method to recover phosphate from swine wastewater

With the large-scale development of the livestock and poultry breeding industries, swine wastewater with high nitrogen and phosphorus concentrations has become an urgent problem. Given the continuous demand for phosphorus resources in industrial production, the study of phosphate recovery in phosphorus-rich wastewater is of great value for the sustainable utilization of phosphorus resources and for alleviating the eutrophication of aquatic ecosystems. In this study, a magnesium metal corrosion method was used to recover phosphorus resources from swine wastewater using carbon felt as the cathode instead of traditional cathode materials such as graphite and titanium plates. The effects of different cathode materials on the corrosion potential of magnesium metal plates were compared, and the effects of carbon felt as a cathode plate on the removal rate and pH of phosphate from wastewater were discussed. Additionally, the economic feasibility of phosphate recovery from swine wastewater was evaluated. The experimental results showed that the effect of carbon felt on the corrosion potential of the magnesium metal plate was more evident than that of the graphite and titanium plates (Ecorr = -1.74676). When carbon felt was used as the cathode plate, the most energy-saving reaction conditions were as follows: reaction time T = 30 min, ratio of wastewater volume to plate area V: S = 500 cm3:50 cm2, aeration rate Re = 8 L/min, stirring rate r = 400 rpm, phosphate recovery rate = 92.3%, and pH = 8.83. The economic feasibility assessment shows that the proposed method is $2.047 g-1 PO4-P without considering the reuse of carbon felt. Carbon felt has good stability and can be recycled eight times or more, and the proposed method achieves a more efficient phosphate recovery rate at a relatively low cost.

Ashes from challenging fuels in the circular economy

In line with the objectives of the circular economy, the conversion of waste streams to useful and valuable side streams is a central goal. Ash represents one of the main industrial side-products, and using ashes in other than the present landfilling applications is, therefore, a high priority. This paper reviews the properties and utilization of ashes of different biomass power plants and waste incinerations, with a focus on the past decade. Possibilities for ash utilization are of uttermost importance in terms of circular economy and disposal of landfills. However, considering its applicability, ash originating from the heat treatment of chemically complex fuels, such as biomass and waste poses several challenges such as high heavy metal content and the presence of toxic and/or corrosive species. Furthermore, the physical properties of the ash might limit its usability. Nevertheless, numerous studies addressing the utilization possibilities of challenging ash in various applications have been carried out over the past decade. This review, with over 300 references, surveys the field of research, focusing on the utilization of biomass and municipal solid waste (MSW) ashes. Also, metal and phosphorus recovery from different ashes is addressed. It can be concluded that the key beneficial properties of the ash types addressed in this review are based on their i) alkaline nature suitable for neutralization reactions, ii) high adsorption capabilities to be used in CO2 capture and waste treatment, and iii) large surface area and appropriate chemical composition for the catalyst industry. Especially, ashes rich in Al2O3 and SiO2 have proven to be promising alternative catalysts in various industrial processes and as precursors for synthetic zeolites.

Application of Box-Behnken Design to Optimize Phosphate Adsorption Conditions from Water onto Novel Adsorbent CS-ZL/ZrO/Fe3O4: Characterization, Equilibrium, Isotherm, Kinetic, and Desorption Studies

Phosphate (PO43-) is an essential nutrient in agriculture; however, it is hazardous to the environment if discharged in excess as in wastewater discharge and runoff from agriculture. Moreover, the stability of chitosan under acidic conditions remains a concern. To address these problems, CS-ZL/ZrO/Fe3O4 was synthesized using a crosslinking method as a novel adsorbent for the removal of phosphate (PO43-) from water and to increase the stability of chitosan. The response surface methodology (RSM) with a Box-Behnken design (BBD)-based analysis of variance (ANOVA) was implemented. The ANOVA results clearly showed that the adsorption of PO43- onto CS-ZL/ZrO/Fe3O4 was significant (p ≤ 0.05), with good mechanical stability. pH, dosage, and time were the three most important factors for the removal of PO43-. Freundlich isotherm and pseudo-second-order kinetic models generated the best equivalents for PO43- adsorption. The presence of coexisting ions for PO43- removal was also studied. The results indicated no significant effect on PO43- removal (p ≤ 0.05). After adsorption, PO43- was easily released by 1 M NaOH, reaching 95.77% and exhibiting a good capability over three cycles. Thus, this concept is effective for increasing the stability of chitosan and is an alternative adsorbent for the removal of PO43- from water.

Targeted clean extraction of phosphorus from waste activated sludge: From a new perspective of phosphorus occurrence states to an innovative approach through acidic cation exchange resin

Waste activated sludge (WAS) is an important source of non-renewable phosphorus (P) recovery. Given the factor that the occurrence states of phosphorus in WAS determines its recovery efficiency, the spatial distribution and chemical speciation of phosphorus were comprehensively and simultaneously analyzed by in-situ and step-by-step extraction methods for the first time. It was confirmed that the phosphorus in solid phase of WAS could be mainly divided into three parts: polyphosphate in cells, extracellular polymeric substances (EPS)-bound P, and phosphate precipitated with metals (P-precipitates) in extracellular inorganic minerals. Among these forms, EPS-bound P (mainly orthophosphate, Ortho-P) and P-precipitates (mainly Ca-P, Fe-P, Al-P, and Mg-P) were the major forms of phosphorus in WAS, accounting for 65%-82% of total phosphorus (TP). Owing to the acid solubility of P-precipitates, acid extraction could be a potentially effective means for phosphorus recovery. However, the co-solution of metals may hinder the phosphorus recovery and the EPS-bound P cannot be recovered by acid extraction. To enhance phosphorus release from EPS and reduce metal interference, a targeted clean extraction technology using acidic cation exchange resin (ACER) was also developed. The results showed that a low dosage ACER could effectively extract EPS-bound P and P-precipitates, and the content of phosphorus in the extract exceeded 50% of TP. Compared with acid extraction, the release efficiency of TP increased by 13%-23%, and the dissolved metal content decreased by more than 90% in the extract by ACER. This was attributed to the acidification and metal capture by ACER. Finally, more than 90% of Ortho-P in the extract was recovered as calcium phosphate, which alleviated the depletion of phosphorus resources.

Electrochemical nutrient removal from natural wastewater sources and its impact on water quality

In this study, a suite of natural wastewater sources is tested to understand the effects of wastewater composition and source on electrochemically driven nitrogen and phosphorus nutrient removal. Kinetics, electrode behavior, and removal efficiency were evaluated during electrochemical precipitation, whereby a sacrificial magnesium (Mg) anode was used to drive precipitation of ammonium and phosphate. The electrochemical reactor demonstrated fast kinetics in the natural wastewater matrices, removing up to 54% of the phosphate present in natural wastewater within 1 min, with an energy input of only 0.04 kWh.m^-3. After 1 min, phosphate removal followed a zero-order rate law in the 1 min - 30 min range. The zero-order rate constant (k) appears to depend upon differences in wastewater composition, where a faster rate constant is associated with higher Cl^- and NH₄⁺ concentrations, lower Ca²⁺ concentrations, and higher organic carbon content. The sacrificial Mg anode showed the lowest corrosion resistance in the natural industrial wastewater source, with an increased corrosion rate (v_corr) of 15.8 mm.y^-1 compared to 1.9-3.5 mm.y^-1 in municipal wastewater sources, while the Tafel slopes (β) showed a direct correlation with the natural wastewater composition and origin. An overall improvement of water quality was observed where important water quality parameters such as total organic carbon (TOC), total suspended solids (TSS), and turbidity showed a significant decrease. An economic analysis revealed costs based upon experimental Mg consumption are estimated to range from 0.19 $.m^-3 to 0.30 $.m^-3, but costs based upon theoretical Mg consumption range from 0.09 $.m^-3 to 0.18 $.m^-3. Overall, this study highlights that water chemistry parameters control nutrient recovery, while electrochemical treatment does not directly produce potable water, and that economic analysis should be based upon experimentally-determined Mg consumption data. Synopsis Statement: Magnesium-driven electrochemical precipitation of natural wastewater sources enables fast kinetics for phosphate removal at low energy input.

Phosphate removal via biological process coupling with hydroxyapatite crystallization in alternating anaerobic/aerobic biofilter reactor

In this work, a laboratory-scale alternating anaerobic/aerobic biofilter (A/O BF) filled with self-made steel slag media was constructed, where the integrated biological and crystalline phosphorus removal process was realized to remove phosphorus and achieve phosphorus recovery from wastewater. Phosphorus accumulating organisms (PAOs) were successfully enriched within 30 days operation, the maximum phosphate removal efficiency was close to 80% under the optimal conditions with the anaerobic time of 34 h, HRT of 4 h and influent COD of 300 mg/L. The analysis of SEM-EDS and XRD indicated that hydroxyapatite (HAP) crystals were formed inside biofilms without addition of chemical reagents. The high phosphate environment created by PAOs and the release of Ca²⁺ from the steel slag media might be responsible for the generation of HAP. These findings have crucial implications for the application BF technology to remove and recover phosphorus from wastewater.

Overview of recent developments of resource recovery from wastewater via electrochemistry-based technologies

As the rapid increase of the worldwide population, recovering valuable resources from wastewater have attracted more and more attention by governments and academia. Electrochemical technologies have been extensively investigated over the past three decades to purify wastewater. However, the application of these technologies for resource recovery from wastewater has just attracted limited attention. In this review, the recent (2010-2020) electrochemical technologies for resource recovery from wastewater are summarized and discussed for the first time. Fundamentals of typical electrochemical technologies are firstly summarized and analyzed, followed by the specific examples of electrochemical resource recovery technologies for different purposes. Based on the fundamentals of electrochemical reactions and without the addition of chemical agents, metallic ions, nutrients, sulfur, hydrogen and chemical compounds can be effectively recovered by means of electrochemical reduction, electrochemical induced precipitation, electrochemical stripping, electrochemical oxidation and membrane-based electrochemical processes, etc. Pros and cons of each electrochemical technology in practical applications are discussed and analyzed. Single-step electrochemical process seems ineffectively to recover valuable resources from the wastewater with complicated constituents. Multiple-step processes or integrated with biological and membrane-based technologies are essential to improve the performance and purity of products. Consequently, this review attempts to offer in-depth insights into the developments of next-generation of electrochemical technologies to minimize energy consumption, boost recovery efficiency and realize the commercial application.

Advances in Struvite Precipitation Technologies for Nutrients Removal and Recovery from Aqueous Waste and Wastewater

The abatement of nutrient compounds from aqueous waste and wastewater is currently a priority issue. Indeed, the uncontrolled discharge of high levels of nutrients into water bodies causes serious deteriorations of environmental quality. On the other hand, the increasing request of nutrient compounds for agronomic utilizations makes it strictly necessary to identify technologies able to recover the nutrients from wastewater streams so as to avoid the consumption of natural resources. In this regard, the removal and recovery of nitrogen and phosphorus from aqueous waste and wastewater as struvite (MgNH4PO4·6H2O) represents an attractive approach. Indeed, through the struvite precipitation it is possible to effectively remove the ammonium and phosphate content of many types of wastewater and to produce a solid compound, with only a trace of impurities. This precipitate, due to its chemical characteristics, represents a valuable multi-nutrients slow release fertilizer for vegetables and plants growth. For these reasons, the struvite precipitation technology constantly progresses on several aspects of the process. This manuscript provides a comprehensive review on the recent developments in this technology for the removal and recovery of nutrients from aqueous waste and wastewater. The theoretical background, the parameters, and the operating conditions affecting the process evolution are initially presented. After that, the paper focuses on the reagents exploitable to promote the process performance, with particular regard to unconventional low-cost compounds. In addition, the development of reactors configurations, the main technologies implemented on field scale, as well as the recent works on the use of struvite in agronomic practices are presented.

Impacts of hydraulic retention time on a continuous flow mode dual-chamber microbial fuel cell for recovering nutrients from municipal wastewater

Nutrients recovery has become a meaningful solution to address shortage in the fertilizer production which is the key issue of nations' food security. The concept of municipal wastewater is based on its ability to be a major potential source for recovered nutrients because of its vast quantity and nutrient-rich base. Microbial fuel cell (MFC) has emerged as a sustainable technology, which is able to recover nutrients and simultaneously generate electricity. In this study a two-chambered MFC was constructed, and operated in a continuous flow mode employing artificial municipal wastewater as a substrate. The effects of hydraulic retention time (HRT) on the recovery of nutrients by MFC were studied. The COD removal rates were insignificantly influenced by varying HRT from 0.35 to 0.69 d, that were over 92%. Furthermore, the recovery rate of nutrients was insignificantly affected while increasing the HRT, which fluctuates from 80% to 90%. In contrast, the maximum power generation declined when HRT increased and the lowest one was 510.3 mV at the HRT of 0.35 d. These results demonstrate that the lab-scale double chamber MFC using municipal wastewater as the substrate can provide a highly effective removal strategy for organic matter, nutrients recovery and electricity output when operating at a specific HRT.