Impact of scale, activation solvents, and aged conditions on gas adsorption properties of UiO-66

Greatly Intensified Guest Exchange Strategy for Highly-Efficient Activation of Metal-Organic Frameworks

The preservation and accessibility of pores are prerequisites to the application of metal-organic frameworks (MOFs). Activation is a key step to eliciting rich features of pores, but it needs a repeated solvent-exchange process which is tedious and time/cost-consuming. Herein, a facile strategy for highly-efficient activation of MOFs utilizing rotating packed bed is proposed. With the tremendous enhancement of molecular mixing and mass transfer in high-gravity and strong-shearing surrounding, nine representative MOFs are completely activated within 2 h without structural change. Compared with conventional process, this activation displays surprising efficiency by accelerating the diffusion of solvents and redissolution of residual reactants in the pores. The complete activation time can be significantly shortened by over 90%. As a proof-of-concept, the methane storage of as-activated UiO-66 is five times that of as-synthesized UiO-66. This strategy provides a potential platform with industrial worth for the activation of MOF materials with ultra-high efficiency and versatility.

Structure characteristics and adsorption performance of graphene oxide prepared by spent carbon cathode-an ultra-low temperature graphitized carbon material

Spent carbon cathode (SCC) is a hazardous waste from the aluminum electrolysis industry. It is commonly used as a carbon source in the current disposal and recovery strategies, such as combustion, or as a reductant for smelting. The novelty of this study is to propose a strategy for recycling SCC as a graphite resource and to investigate the unique structural characteristics and adsorption properties of graphene oxide produced from this low temperature graphitized carbon. The adsorption kinetics and isotherms of SCC-GO on methylene blue (MB) were studied and compared with the GO prepared from natural flake graphite (NFG) and artificial graphite (AG). The results show that SCC-GO exhibits the highest adsorption rate and adsorption capacity (647.83 mg/g) for MB, which is much higher than NFG-GO (451.22 mg/g) and AG-GO (533.12 mg/g). The analysis of the spectroscopy and morphology confirmed that SCC-GO has a high degree of crystal defects, oxidation, and surface wrinkle. Overall, this study reveals the unique structure of SCC-GO and highlights its significant scientific and application potential as an ultra-low temperature graphitized carbon. This research is also significant for recycling aluminum electrolytic cathode solid waste in the form of a graphite source.

Cu2O/Fe3O4/UiO-66 nanocomposite as an efficient fenton-like catalyst: Performance in organic pollutant degradation and influencing factors based machinelearning

The persistent presence of organic pollutants like dyes in water environment necessitates innovative approaches for efficient degradation. In this research, we developed an advanced hybrid catalyst by combining metal oxides (Cu2O, Fe3O4) with UiO-66, serving as a heterogeneous Fenton catalyst for for efficient RB19 breakdown in water with H2O2. The control factors to the catalytic behavior were also quantified by machine learning. Experimental results show that the catalytic performance was much better than its individual components (P < 0.05 & non-zero 95% C.I). The improved catalytic efficiency was linked to the occurrence of active metal centers (Fe, Cu, and Zr), with Cu(I) from Cu2O playing a crucial role in promoting increased production of HO•. Also, UiO-66 served as a catalyst support, attracting pollutants to the reaction center, while magnetic Fe3O4 aids catalyst recovery. The optimal experimental parameters for best performance were pH at 7, catalyst loading of 1.6 g/L, H2O2 strength of 0.16 M, and reaction temperature of 25 °C. The catalyst can be magnetically separated and regenerated after five recycling times without significantly reducing catalytic activity. The reaction time and pH were ranked as the most influencing factors on catalytic efficiency via Random Forest and SHapley Additive exPlanations models. The findings show that developed catalyst is a suitable candidate to remove dyes in water by Fenton heterogeneous reaction.

Lignin-modified metal-organic framework as an effective adsorbent for the removal of methyl orange

Herein, lignin-modified metal-organic frameworks (NH2-UIO@L) are prepared using a one-step synthesis as sorbents for the removal of organic dyes from water. The introduction of lignin improved the adsorption sites. NH2-UIO@L2 adsorption of MO conforms to Langmuir model, and the adsorption capacity of NH2-UIO@L2 on MO was 214.13 mg·L-1 with an adsorption efficiency up to 99.28 %, which was significantly higher than values for other adsorbents. Due to hydrogen bonds, π-π interactions and electrostatic interactions, MO was effectively removed by NH2-UIO@L2 and its adsorption efficiency is maintained at 90.55 % after six cycles. The adsorption kinetics showed that the NH2-UIO@L2 adsorption of MO was chemical adsorption and controlled by intraparticle diffusion and external mass transfer. Further, the adsorption performance of NH2-UIO@L2 on MO and MB in mixed MO/MB solution was investigated. The adsorption capacity of NH2-UIO@L2 in mixed MO/MB solution was 207.04 mg·L-1 for MO and 243.31 mg·L-1 for MB; the adsorption of NH2-UIO@L2 on MO followed the Dubinin-Radushkevich and pseudo-second-order models, and the adsorption on MB followed the Temkin and pseudo-second-order models. Hydrogen bonds, π-π interactions, and pore filling are all implicated in the removal of MO and MB. In particular, the electrostatic attraction between MB and MO improves the adsorption efficiency of NH2-UIO@L2 on MB. NH2-UIO@L2 has good reusability, maintaining an adsorption efficiency of 97.66 % for MO and up to 99.15 % for MB after six cycles. Its simple preparation and superior adsorption suggest that NH2-UIO@L2 has considerable potential to remove organic dyes from wastewater.

Facile fabrication of Eu-based metal-organic frameworks for highly efficient capture of tetracycline hydrochloride from aqueous solutions

The tetracycline hydrochloride (TCH) removal from wastewater is important for the environment and human health yet challenging. Herein, the Eu-based MOF, Eu(BTC) (BTC represents 1,3,5-trimesic acid) was prepared by an efficient and environmental-friendly strategy, and then was used for the TCH capture for the first time. The Eu(BTC) was characterized by different methods such as X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectroscopy. The TCH uptake of Eu(BTC) was investigated systematically. The influences of experiment conditions such as solution pH value, adsorption time and initial concentration on TCH capacity of Eu(BTC) were also studied. The Eu(BTC) obtained exhibited remarkable TCH uptake (q_m was up to 397.65 mg/g), which was much higher than those of most materials such as UiO-66/PDA/BC (184.30 mg/g), PDA-NFsM (161.30 mg/g) and many carbon-based materials reported till now. Besides, the TCH adsorption behavior on Eu(BTC) was explored by Freundlich and Langmuir equations, and the adsorption mechanism was further analyzed. The experimental results suggested that the TCH adsorption mechanism of Eu(BTC) included the π-π interaction, electrostatic interaction and coordinate bonds. The excellent TCH adsorption performance and the efficient fabrication strategy make the Eu(BTC) prepared promising in TCH removal.

UiO-66 framework with an encapsulated spin probe: synthesis and exceptional sensitivity to mechanical pressure

Probes sensitive to mechanical stress are in demand for the analysis of pressure distribution in materials, and the design of pressure sensors based on metal-organic frameworks (MOFs) is highly promising due to their structural tunability. We report a new pressure-sensing material, which is based on the UiO-66 framework with trace amounts of a spin probe (0.03 wt%) encapsulated in cavities. To obtain this material, we developed an approach for encapsulation of stable nitroxide radical TEMPO ((2,2,6,6-tetramethylpiperidin-1-yl)oxyl) into the micropores of UiO-66 during its solvothermal synthesis. Pressure read-out using electron paramagnetic resonance (EPR) spectroscopy allows monitoring the degradation of the defected MOF structure upon pressurization, where full collapse of pores occurs at as low a pressure as 0.13 GPa. The developed methodology can be used in and ex situ and provides sensitive tools for non-destructive mapping of pressure effects in various materials.

Adsorptive removal of organic pollutants from milk-processing industry effluents through chitosan-titanium dioxide nanoadsorbent-coated sand

Milk-processing industry effluent (MPIE) poses severe problems for aquatic and environmental systems, especially in the South Asian region. Therefore, its treatment is of great interest. This study deals with the investigation of chitosan titanium dioxide nanoadsorbent (CTiO₂) coated onto sand particles via calcination that are used to remove the emerging pollutants. The adsorptive properties of these developed adsorbents are compared with those of the nascent sand without coating as well as with the chitosan titanium dioxide nanoadsorbent coated sand (CTiO₂-CS). Batch adsorption experiments were performed to investigate the percent reduction efficiency (%RE) of organic pollutants in terms of biological oxygen demand (BOD) and chemical oxygen demand (COD) from synthetic and real effluents. The maximum %RE of BOD (96.76) and COD (98.91) was achieved at 1.5 M dose of CTiO₂-CS, 120 min of contact time, pH 6.5, an initial BOD concentration of 900 mg/L, and an agitation speed of 400 rpm. Similarly, the %RE of COD was found to be 86.75 for synthetic effluent and 90.97 for real effluent at initial COD concentrations of 8000 mg/L. Pseudo-second-order and Langmuir models are found to be the best fits for BOD and COD adsorption. The diffusion model suggests that surface adsorption as well as intraparticle diffusion contribute to the actual adsorption process. Regeneration experiments were performed for four cycles, and CTiO₂-CS was found to be the most regenerable adsorbent material. The performance of the adsorbent was compared with previous studies, and it was found to have excellent adsorption capacity. As a result, the developed filter bed could be used as a promising superadsorbent for the removal of organic load in MPIE.

Metal-organic frameworks: A promising option for the diagnosis and treatment of Alzheimer's disease

Beta-amyloid (Aβ) peptide is one of the main characteristic biomarkers of Alzheimer's disease (AD). Previous clinical investigations have proposed that unusual concentrations of this biomarker in cerebrospinal fluid, blood, and brain tissue are closely associated with the AD progression. Therefore, the critical point of early diagnosis, prevention, and treatment of AD is to monitor the levels of Aβ. In view of the potential of metal-organic frameworks (MOFs) for diagnosing and treating the AD, much attention has been focused in recent years. This review discusses the latest advances in the applications of MOFs for the early diagnosis of AD via fluorescence and electrochemiluminescence (ECL) detection of AD biomarkers, fluorescence detection of the main metal ions in the brain (Zn²⁺, Cu²⁺, Mn²⁺, Fe³⁺, and Al³⁺) in addition to magnetic resonance imaging (MRI) of the Aβ plaques. The current challenges and future strategies for translating the in vitro applications of MOFs into in vivo diagnosis of the AD are discussed.

Solid Phase Extraction of (+)-Catechin from Cocoa Shell Waste Using Dual Ionic Liquid@ZIF8 Covered Silica

(+)-catechin is one category of flavonoids in cocoa shell waste and it has been reported to have many health benefits. In order to isolate it from aqueous extracted solution of cocoa shell waste by solid phase extraction (SPE), a series of dual ionic liquids@ZIF8-covered silica were prepared as the sorbents. Regarding the operation conditions of SPE and the characteristic structure of (+)-catechin, ZIF8-covered silica was synthesized to establish a stable and porous substrate, and various dual ionic liquids with multiple properties were immobilized on substrate to obtain a high adsorption capacity. Different adsorption conditions were investigated and the highest adsorption capacity (58.0 mg/g) was obtained on Sil@ZIF8@EIM-EIM at 30 °C during 60.0 min. When the sorbent was applied in the SPE process, 96.0% of the total amount of (+)-catechin from cocoa shell waste can be isolated after several washing and elution steps. The satisfactory recoveries of 97.5–100.2% and RSDs of 1.3–3.2% revealed that the SPE process was accurate and precise. The stability of Sil@ZIF8@EIM-EIM was tested in water and the reusability was tested using repeated adsorption/desorption process. The results revealed that Sil@ZIF8@EIM-EIM as an efficient sorbent can isolate (+)-catechin from cocoa shell waste.

Adsorption Behavior of a Gd-Based Metal-Organic Framework toward the Quercetin Drug: Effect of the Activation Condition

A carboxylate gadolinium-based metal-organic framework (Gd-MOF) is an exceptional candidate for magnetic resonance imaging agents, but its low drug adsorption capacity hinders this MOF from being used as a theragnostic agent. In this work, the Gd-MOF was synthesized by a simple solvothermal method. Then, different activation situations, including various solvents over different time periods, were applied to enhance the specific surface area of the synthesized MOF. Different characterization analyses such as X-ray diffraction and Brunauer-Emmett-Teller along with experimental quercetin adsorption tests were done to study the crystalline and physical properties of various activated MOFs. In the following, the MOF activated by ethanol for 3 days (3d-E) was chosen as the best activated MOF due to its crystallinity, highest specific surface area, and drug adsorption capacity. More explorations were done for the selected MOF, including the drug adsorption isotherm, thermodynamics, and pH effect of adsorption. The results show that the activation process substantially affects the crystallinity, morphology, specific surface area, and drug adsorption capacity of Gd-MOFs. An optimized activation condition is proposed in this work, which shows an impressive enhancement of the specific surface area of Gd-MOFs just by simple solvent exchange method employment.

Functionalized UiO-66-NH2 by trimellitic acid for highly selective adsorption of basic blue 3 from aqueous solutions

A novel metal-organic framework (MOF) UiO-66-TLA (UiO-66-Trimellitic Acid) was synthesized by one-pot method with trimellitic acid as modifier, which can effectively remove the basic dye Basic Blue 3 (BB3) in wastewater. Modification with carboxyl groups facilitates the adsorption of the cationic dye Basic Blue 3. The adsorption of BB3 by the modified UiO-66-TLA was significantly greater than that of its parent MOF. The adsorption capacity of the modified UiO-66-TLA for BB3 (234.23 mg g⁻¹) was 93.2% higher than that of the original UiO-66-NH₂ (121.24 mg g⁻¹), this is closely related to the electrostatic interaction of -COOH in trimellitic acid. UiO-66-TLA was successfully synthesized as indicated by various characterization results. The adsorption kinetics conformed to the pseudo-second-order model, and the adsorption isotherm conformed to the Redlich-Peterson isotherm. This indicates that BB3 is a multi-parameter model of monolayer/multilayer arrangement on the adsorbent surface, and its rate-controlling step is chemisorption. The adsorption process was non-spontaneous and belonged to an endothermic reaction, in addition, it has great adsorption stability and regeneration The interaction of the modified UiO-66-TLA with BB3 was mainly affected by mechanisms, such as electrostatic interaction, π–π stacking as well as the abundant functional groups on UiO-66-TLA surface. These results demonstrate that UiO-66-TLA is an efficient, regenerable, water-stable material for the removal of BB3 in solution, with practical implications, suggesting its potential as a dye adsorbent.

Negatively Charged MOF-Based Composite Anion Exchange Membrane with High Cation Selectivity and Permeability

Every metal and metallurgical industry is associated with the generation of wastewater, influencing the living and non-living environment, which is alarming to environmentalists. The strict regulations about the dismissal of acid and metal into the environment and the increasing emphasis on the recycling/reuse of these effluents after proper remedy have focused the research community's curiosity in developing distinctive approaches for the recovery of acid and metals from industrial wastewaters. This study reports the synthesis of UiO-66-(COOH)₂ using dual ligand in water as a green solvent. Then, the prepared MOF nanoparticles were introduced into the DMAM quaternized QPPO matrix through a straightforward blending approach. Four defect-free UiO-66-(COOH)₂/QPPO MMMs were prepared with four different MOF structures. The BET characterization of UiO-66-(COOH)₂ nanoparticles with a highly crystalline structure and sub-nanometer pore size (~7 Å) was confirmed by XRD. Because of the introduction of MOF nanoparticles with an electrostatic interaction and pore size screening effect, a separation coefficient (S_HCl/FeCl2) of 565 and U_HCl of 0.0089 m·h^-1 for U-C(60)/QPPO were perceived when the loading dosage of the MOF content was 10 wt%. The obtained results showed that the prepared defect-free MOF membrane has broad prospects in acid recovery applications.

Enhancing Seebeck coefficient and electrical conductivity of polyaniline/carbon nanotube–coated thermoelectric fabric

In this work, flexible thermoelectric fabrics, polyester/yarn fabrics coated with polyaniline/carbon nanotube (PANI/CNT) nanocomposite, were fabricated by sequential processing: (I) polyaniline/carbon nanotube nanocomposites preparation by a one-step in-situ polymerization and (II) dip coating of a mixture solution of CNT-doped PANI on a polyester/yarn fabric. Nanocomposites were synthesized with various CNT content (0.5, 2.5, 5, and 10 wt%) and characterized using different methods. The Seebeck coefficient and electrical conductivity measurements were used to determine their thermoelectric properties. The results revealed significant improvement in both electrical conductivity and the Seebeck coefficient with the addition of CNT. The electrical conductivity increased from 0.011 to 0.1345 S/cm with the increment of CNT from 0.5 to 10 wt%. The highest Seebeck coefficient of 11.4 μV/K was observed for the sample containing 5 wt% CNT at 338 K where the maximum power factor of 1.598×10−3 μWm−1K−2 was obtained for the fabric coated with nanocomposite containing 10 wt% CNT.

Preparation of Highly Stable DUT-52 Materials and Adsorption of Dichromate Ions in Aqueous Solution

Highly stable DUT-52 materials were synthesized by the hydrothermal method and well-characterized by X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and X-ray photoelectron spectroscopy (XPS). In order to systematically study the adsorption of dichromate ions in aqueous solution by the DUT-52 materials, a single factor experiment, kinetic experiment, thermodynamic experiment, competition ion experiment, and material regeneration experiment were designed. Based on the H-bond interaction between the dichromate ions and the H atoms of a NDC^2- ligand, the DUT-52 materials showed a maximum removal rate of 96.4% and a maximum adsorption capacity of 120.68 mg·g^-1 with excellent selective adsorption and material regeneration. In addition, the process of adsorption of dichromate ions by the DUT-52 materials is in accordance with the pseudo second-order kinetics and Langmuir models, and the adsorption mechanism and the important role of the H-bond interaction were reasonably explained using the XPS pattern and theoretical calculation. Accordingly, DUT-52 can be regarded as a multifunctional material for efficiently removing dichromate ions from the wastewater.

Facile immobilization of ethylenediamine tetramethylene-phosphonic acid into UiO-66 for toxic divalent heavy metal ions removal: An experimental and theoretical exploration

By the facile immobilization of ethylenediamine tetramethylene-phosphonic acid (EDTMPA) onto the surface and into the defects of UiO-66, a stable and efficient adsorbent named UiO-66-EDTMPA was obtained for the first time. In terms of removing aqueous heavy metal ions (Pb²⁺, Cd²⁺, Cu²⁺), the maximum adsorption capacities of UiO-66-EDTMPA reached 558.67, 271.34 and 210.89 mg/g, which were 8.77 (Pb²⁺), 5.63 (Cd²⁺) and 5.19 (Cu²⁺) times higher than raw UiO-66 respectively. The adsorption behavior of three heavy metal ions on UiO-66 and UiO-66-EDTMPA were investigated and compared through batch control experiments and theoretical studies. The main factors on adsorption progress (i.e., the dosage of EDTMPA, pH, ionic strength, co-existing ions, initial concentration, contact time, temperature) were explored, and the critical characterization (i.e., SEM, TEM, XRD, FT-IR, TG-DTG, XPS, N₂ adsorption-desorption test) were performed. Molecular dynamics (MD) simulation (radial distribution functions (RDF) and mean square displacement (MSD)) were also applied to reveal the adsorption behavior. Besides, two new quantum chemical analyses (Hirshfeld surface and independent gradient model (IGM)) were introduced into the interaction analysis between UiO-66 and EDTMPA. The complete results showed that (1) where the hydrogen bond and (vdW) connect EDTMPA to UiO-66. (2) The coordination between O, N atoms of EDTMPA and heavy metal ions (Pb²⁺, Cd²⁺, Cu²⁺) resulted in spontaneous adsorption. (3) The adsorption behavior agreed with Langmuir and pseudo-second-order model, endothermic reaction. In addition, the desorption and reusability study showed promising stable and sustainable performance. This work has some guiding significance for the experimental and theoretical study of removing heavy metal ions from aqueous solutions by MOF or modified MOF materials.

Metal-Organic Frameworks (MOFs) as methane adsorbents: From storage to diluted coal mining streams concentration

Ventilation Air Methane emissions (VAM) from coal mines lead to environmental concern because their high global warming potential and the loss of methane resources. VAM upgrading requires pre-concentration processes dealing with high flow rates of very diluted streams (<1% methane). Therefore, methane separation and concentration is technically challenging and has important environmental and safety concerns. Among the alternatives, adsorption on Metal-Organic Frameworks (MOFs) could be an interesting option to methane selective separation, due to its tuneable character and outstanding physical properties. Most of the works devoted to the methane adsorption on MOFs deal with methane storage. Therefore, these works were reviewed to determine the properties governing methane-MOF interactions. In addition, the metallic ions and organic linkers roles have been identified. With these premises, decisive effects in the methane adsorption selectivity in nitrogen/methane lean mixtures have been discussed, since nitrogen is the most concentrated gas in the VAM stream, and it is very similar to methane molecule. In order to fulfill this overview, the effect of other aspects, such as the presence of polar compounds (moisture and carbon dioxide), was also considered. In addition, engineering considerations in the operation of fixed bed adsorption units and the main challenges associated to MOFs as adsorbents were also discussed.

Water Bridges Substitute for Defects in Amine-Functionalized UiO-66, Boosting CO2 Adsorption

The binary adsorption of CO₂ and water on an amine-functionalized UiO-66 metal-organic framework (MOF) was studied experimentally and computationally. Grand canonical Monte Carlo simulations were used to investigate three additional UiO-66 MOFs with different functionalized linkers. Each MOF was studied in a defect-free form as well as two additional forms with precise linker defects. Binary adsorption isotherms are presented for CO₂ at specific water loadings. While water loading in defect-free MOFs reduces the CO₂ uptake, the defects slightly boost the CO₂ uptake at low water loadings. It was found that water bridges form between the metal oxide cores, replacing the missing linkers. Effectively, this creates smaller pores that are more welcoming of CO₂ adsorption. Experimental measurement of the binary isotherms for UiO-66-NH₂ shows a behavior that is consistent with this enhancement.