Staged electrochemical treatment guided by modelling allows for targeted recovery of metals and rare earth elements from acid mine drainage

A review of greener approaches for rare earth elements recovery from mineral wastes

The use of rare earth elements (REE) in many various fields, including high-tech products, increases the demand for these materials day by day. The production of REE from primary sources has expanded in response to increasing demand; however, due to its limited, a more sustainable supply is also started to offer for the REE demand by using secondary sources. The most commonly used metallurgical method for REE recovery is hydrometallurgical processes. However, it has some disadvantages, like pyrometallurgical methods. In the review, studies of the environmental impacts of REE production from primary sources and life cycle assessments of products containing REE were investigated. According to the results, it has been seen that those studies in the literature in which hydrometallurgical methods have changed to more environmentally friendly approaches have begun to increase. In this review, mine wastes, which are secondary sources, were defined, conventional methods of recovery of rare earth elements were discussed, greener approaches to the recovery of REE from these sources were comprehensively examined and studies in the literature were evaluated. Furthermore, it was stated that there are limited studies on green approaches and REE recovery from mineral wastes and that this field is developing with an emphasis on the current outlook and future perspectives.

A review of passive acid mine drainage treatment by PRB and LPB: From design, testing, to construction

An extensive volume of acid mine drainage (AMD) generated throughout the mining process has been widely regarded as one of the most catastrophic environmental problems. Surface water and groundwater impacted by pollution exhibit extreme low pH values and elevated sulfate and metal/metalloid concentrations, posing a serious threat to the production efficiency of enterprises, domestic water safety, and the ecological health of the basin. Over the recent years, a plethora of techniques has been developed to address the issue of AMD, encompassing nanofiltration membranes, lime neutralization, and carrier-microencapsulation. Nonetheless, these approaches often come with substantial financial implications and exhibit restricted long-term sustainability. Among the array of choices, the permeable reactive barrier (PRB) system emerges as a noteworthy passive remediation method for AMD. Distinguished by its modest construction expenses and enduring stability, this approach proves particularly well-suited for addressing the environmental challenges posed by abandoned mines. This study undertook a comprehensive evaluation of the PRB systems utilized in the remediation of AMD. Furthermore, it introduced the concept of low permeability barrier, derived from the realm of site-contaminated groundwater management. The strategies pertaining to the selection of materials, the physicochemical aspects influencing long-term efficacy, the intricacies of design and construction, as well as the challenges and prospects inherent in barrier technology, are elaborated upon in this discourse.

Efficient cadmium removal from industrial wastewater generated from smelter using chemical precipitation and oxidation assistance

The effective treatment of cadmium (Cd) in smelting wastewater is of great industrial importance. This study investigates the efficient removal of Cd from real industrial smelting wastewater via chemical precipitation using a series of experiments. In particular, the effects of different precipitants, agitation conditions, and the addition of NaOCl on Cd removal and pH variation are investigated. CaO (3.75 g/L), NaOH (3.50 g/L), and Ca(OH)2 (3.75 g/L) are found to be effective in elevating the wastewater pH and achieving high Cd removal rates (>99.9%), while the use of NaOH as a precipitant maintains a high Cd removal rate even at low agitation intensities. The properties of the produced sludge and supernatant are also determined using moisture content, particle size, and sludge leaching analyses due to the importance of economic and environmental sustainability in filtration, dewatering, and waste disposal processes. In addition, the addition of 2% NaOCl is tested, revealing that it can improve the Cd removal efficiency of Ca(OH)2, thus potentially reducing processing costs and enhancing the environmental benefits. Overall, these findings offer valuable insights into the removal of Cd from smelting wastewater, with potential implications for both environmental sustainability and economic viability. PRACTITIONER POINTS: CaO, NaOH, and Ca(OH)2 effectively remove Cd (>99.9%) from smelting wastewater. The use of NaOH leads to high Cd removal rates even at low agitation speeds. Adding 2% NaOCl can reduce the Ca(OH)2 dose for more economical Cd removal.

Element distribution in electrochemically treated mine wastewater for efficient resource recovery and water treatment: A pilot study

The feasibility of recovering major and critical elements from acid mine drainage using a pilot-scale electrochemical reactor (ECR) was investigated by assessing elements concentration and species distribution in the liquid and solid phase (sludge) in multistage tests. These were carried out at different electrical currents (18-22 amps) and thus, pH (8-12). The results showed that major metals Al, Cu and Fe were removed from the liquid phase at pH 5.9 while remaining the majority of Zn (57.2 ppm). On the other hand, at pH 7, the effluent was mainly composed of Mn (7.3 ppm). These results were confirmed by the simulation results using the PHREEQC model, which also identified the main chemical species in solution and the precipitates formed after the treatment (oxyhydroxides/sulfates/oxides). The ECR treatment led to sludges with targeted critical elements, some up to 20 times (Co, Be and Sb) higher than their earth's crustal abundance. At pH 10, rare earth elements in the sludge targeted Ce, followed by Nd and La. This study is one of the few studies carrying a detailed analysis of the behavioural distribution pattern of these elements at each pH, which opens the door for the potential of recovering these elements.

Beryllium contamination and its risk management in terrestrial and aquatic environmental settings

Beryllium (Be) is a relatively rare element and occurs naturally in the Earth's crust, in coal, and in various minerals. Beryllium is used as an alloy with other metals in aerospace, electronics and mechanical industries. The major emission sources to the atmosphere are the combustion of coal and fossil fuels and the incineration of municipal solid waste. In soils and natural waters, the majority of Be is sorbed to soil particles and sediments. The majority of contamination occurs through atmospheric deposition of Be on aboveground plant parts. Beryllium and its compounds are toxic to humans and are grouped as carcinogens. The general public is exposed to Be through inhalation of air and the consumption of Be-contaminated food and drinking water. Immobilization of Be in soil and groundwater using organic and inorganic amendments reduces the bioavailability and mobility of Be, thereby limiting the transfer into the food chain. Mobilization of Be in soil using chelating agents facilitates their removal through soil washing and plant uptake. This review provides an overview of the current understanding of the sources, geochemistry, health hazards, remediation practices, and current regulatory mandates of Be contamination in complex environmental settings, including soil and aquatic ecosystems.

Resource Utilization of Acid Mine Drainage (AMD): A Review

Acid mine drainage (AMD) is a typical type of pollution originating from complex oxidation interactions that occur under ambient conditions in abandoned and active mines. AMD has high acidity and contains a high concentration of heavy metals and metalloids, posing a serious threat to ecological systems and human health. Over the years, great progress has been made in the prevention and treatment of AMD. Remediation approaches like chemical neutralization precipitation, ion exchange, membrane separation processes, and bioremediation have been extensively reported. Nevertheless, some limitations, such as low efficacy, excessive consumption of chemical reagents, and secondary contamination restrict the application of these technologies. The aim of this review was to provide updated information on the sustainable treatments that have been engaged in the published literature on the resource utilization of AMD. The recovery and reuse of valuable resources (e.g., clean water, sulfuric acid, and metal ions) from AMD can offset the cost of AMD remediation. Iron oxide particles recovered from AMD can be applied as adsorbents for the removal of pollutants from wastewater and for the fabrication of effective catalysts for heterogeneous Fenton reactions. The application of AMD in beneficiation fields, such as activating pyrite and chalcopyrite flotation, regulating pulp pH, and leaching copper-bearing waste rock, provides easy access to the innovative utilization of AMD. A review such as this will help researchers understand the progress in research, and identify the strengths and weaknesses of each treatment technology, which can help shape the direction of future research in this area.