Influence of process parameters on hydrothermal modification of soybean residue: Insight into the nutrient, solid biofuel, and thermal properties of hydrochars

Evaluation of pesticide contamination risks and sustainable practices in Ecuadorian agriculture

Pesticide use is crucial in global agriculture to control pests and increase crop yields. In Ecuador, the use of pesticides, including fungicides and insecticides, is common in crops such as potatoes and tomatoes. However, the indiscriminate use of these products has proven to have negative consequences for human health and the environment. This study investigates these risks in Ecuadorian agriculture, specifically in the Paute canton, where inadequate data exacerbates these issues. Employing a descriptive research design, data were collected through validated surveys administered to 30 farmers (9 women and 21 men) residing in various rural communities. The study also included observational methods to complement survey data. Findings reveal that farmer, predominantly with primary education, face health risks from inappropriate pesticide use. Symptoms reported include eye irritation, headaches, and nasal irritation, which vary based on education level and safety practices. The research highlights the urgent need for improved pesticide management through targeted training and sustainable practices. This study's insights into the extent of health issues and variability in safety measures provide a basis for developing effective interventions to mitigate the health and environmental impacts of pesticide use in Paute and similar regions.

Remediation of chromium contaminated water and soil by nitrogen and iron doped biochars

Chromium (Cr) is a toxic and redox-sensitive contaminant that has accumulated in water and soil systems, becoming a serious issue worldwide. Producing novel remedial materials with enhanced removal efficiency from plentiful available sources is a pleasing aspect for Cr removal. This review explores valuable insights into the production of nitrogen doped biochar (N/BC), iron doped biochar (Fe/BC), and iron‑nitrogen doped biochar (Fe-N/BC) and their application for Cr (trivalent (Cr(III)) and hexavalent (Cr(VI)) removal. Specifically, this review focuses on conferring knowledge about producing environmentally friendly N and Fe doped BCs with enhanced surface functionalities, physicochemical properties, and holding capacities for removing Cr(VI) through adsorption and reduction. Affecting factors for Cr(VI) removal by N/BC, Fe/BC, and Fe-N/BC through reviewing the literature on the reaction system pH, mass transfer driving forces, effect of coexisting ions, BC production conditions, and redox potential are overviewed. Notably, isotherm and kinetic models and removal mechanisms of Cr(VI) by N/BC, Fe/BC, and Fe-N/BC with the assistance of characterization analyses, experimental results, and computational modeling methods are explored. Finally, the regeneration, cost evaluation, and environmental implications, as well as the real-world applications and environmental risks of N/BC, Fe/BC, and Fe-N/BC are discussed. This review shows that N and Fe doped BCs are remedial materials that can potentially remediate Cr(VI) contaminated water and soil.

Recent progress in TiO2-biochar-based photocatalysts for water contaminants treatment: strategies to improve photocatalytic performance

Toxic organic pollutants in wastewater have seriously damaged human health and ecosystems. Photocatalytic degradation is a potential and efficient tactic for wastewater treatment. Among the entire carbon family, biochar has been developed for the adsorption of pollutants due to its large specific surface area, porous skeleton structure, and abundant surface functional groups. Hence, combining adsorption and photocatalytic decomposition, TiO2-biochar photocatalysts have received considerable attention and have been extensively studied. Owing to biochar's adsorption, more active sites and strong interactions between contaminants and photocatalysts can be achieved. The synergistic effect of biochar and TiO2 nanomaterials substantially improves the photocatalytic capacity for pollutant degradation. TiO2-biochar composites have numerous attractive properties and advantages, culminating in infinite applications. This review discusses the characteristics and preparation techniques of biochar, presents in situ and ex situ synthesis approaches of TiO2-biochar nanocomposites, explains the benefits of TiO2-biochar-based compounds for photocatalytic degradation, and emphasizes the strategies for enhancing the photocatalytic efficiency of TiO2-biochar-based photocatalysts. Finally, the main difficulties and future advancements of TiO2-biochar-based photocatalysis are highlighted. The review gives an exhaustive overview of recent progress in TiO2-biochar-based photocatalysts for organic contaminants removal and is expected to encourage the development of robust TiO2-biochar-based photocatalysts for sewage remediation and other environmentally friendly uses.

Roles and significance of chelating agents for potentially toxic elements (PTEs) phytoremediation in soil: A review

Phytoremediation is a biological remediation technique known for low-cost technology and environmentally friendly approach, which employs plants to extract, stabilise, and transform various compounds, such as potentially toxic elements (PTEs), in the soil or water. Recent developments in utilising chelating agents soil remediation have led to a renewed interest in chelate-induced phytoremediation. This review article summarises the roles of various chelating agents and the mechanisms of chelate-induced phytoremediation. This paper also discusses the recent findings on the impacts of chelating agents on PTEs uptake and plant growth and development in phytoremediation. It was found that the chelating agents have increased the rate of metal absorption and translocation up to 45% from roots to the aboveground plant parts during PTEs phytoremediation. Besides, it was also explored that the plants may experience some phytotoxicity after adding chelating agents to the soil. However, due to the leaching potential of synthetic chelating agents, the use of organic chelants have been explored to be used in PTEs phytoremediation. Finally, this paper also presents comprehensive insights on the significance of using chelating agents through SWOT analysis to discuss the advantages and limitations of chelate-induced phytoremediation.

Energy recovery from agro-forest wastes through hydrothermal carbonization coupled with hydrothermal Co-gasification: Effects of succinic acid on hydrochars and H2 production

Aiming to upgrade agro-forest wastes into value-added solid and gaseous fuels in the present investigation, hydrothermal carbonization (HTC) of spruce (SP), canola hull (CH), and canola meal (CM) was optimized in terms of operating conditions, maximizing the higher heating value of hydrochars. The optimal operating conditions were achieved at HTC temperature, reaction time, and solid-to-liquid ratio of 260 ^°C, 60 min, and 0.2 g mL^-1, respectively. At the optimum condition, succinic acid (0.05-0.1 M) was used as HTC reaction medium to investigate the effects of acidic medium on the fuel characteristics of hydrochars. The succinic acid assisted HTC was found to eliminate ash-forming minerals e.g., K, Mg, and Ca from hydrochar backbones. The calorific values, H/C and O/C atomic ratios of hydrochars were in the range of 27.6-29.8 MJ kg^-1, 0.8-1.1, and 0.1-0.2, respectively, indicating the biomass upgrading into coal-like solid fuels. Finally, hydrothermal gasification of hydrochars with their corresponding HTC aqueous phase (HTC-AP) was assessed. Gasification of CM resulted in a relatively high H₂ yield of 4.9-5.5 mol kg^-1 followed by that for SP with 4.0-4.6 mol H₂ per kg of hydrochars. Results suggest that hydrochars and HTC-AP have a great potential for H₂ production via hydrothermal co-gasification, while suggesting HTC-AP reuse.

A review on the emerging conversion technology of cellulose, starch, lignin, protein and other organics from vegetable-fruit-based waste

A large amount of vegetable-fruit-based waste (VFBW) belonging to agricultural waste is produced around the world every year, imposing a huge burden on the environment and sustainable development. VFBW contains a lot of water and useful organic compounds (e.g., cellulose, minerals, starch, proteins, organic acids, lipids, and soluble sugars). Taking into account the composition characteristics and circular economy of VFBW, many new emerging conversion technologies for the treatment of VFBW (such as hydrothermal gasification, ultrasound-assisted extraction, and synthesis of bioplastics) have been developed. This review summarizes the current literature discussing the technical parameters, process, mechanism, and characteristics of various emerging conversion methods, as well as analyzing the application, environmental impact, and bio-economy of by-products from the conversion process, to facilitate solutions to the key problems of engineering cases using these methods. The shortcomings of the current study and the direction of future research are also highlighted in the review.

Nitrogen-doped biochar (N-doped BC) and iron/nitrogen co-doped biochar (Fe/N co-doped BC) for removal of refractory organic pollutants

The presence of refractory organic pollutants (ROPs) in the ecosystem is a serious concern because of their impact on environmental constituents as well as their known or suspected ecotoxicity and adverse health effects. According to previous studies, carbonaceous materials, such as biochar (BC), have been widely used to remove pollutants from ecosystems owing to their desirable features, such as relative stability, tunable porosity, and abundant functionalities. Nitrogen (N)-doping and iron/nitrogen (Fe/N) co-doping can tailor BC properties and provide supplementary functional groups as well as extensive active sites on the N-doped and Fe/N co-doped BC surface, which is advantageous for interaction with and removal of ROPs. This review investigates the impact of N-doped and Fe/N co-doped BC on the removal of ROPs through adsorption, activation oxidation, and catalytic reduction due to the synergistic Fe, N, and BC features that modify the physicochemical properties, surface functional groups, and persistent free radicals of BC to aid in the degradation of ROPs. Owing to the attractive properties of N-doped and Fe/N co-doped BCs for the removal of ROPs, this review focuses and evaluates previous experimental investigations on the manufacturing (including precursors and influencing parameters during manufacturing) and characterizations of N-doped and Fe/N co-doped BCs. Additionally, the effective applications and mechanisms of N-doped and Fe/N co-doped BCs in adsorption, activation oxidation, and reductive remediation of ROPs are investigated herein. Moreover, the application of N-doped and Fe/N co-doped BC for progressive environmental remediation based on their effectiveness against co-pollutants, regeneration, stability, affordability, and future research prospects are discussed.

Hydrothermal treatment: An efficient food waste disposal technology

The quantities of food waste (FW) are increasing yearly. Proper disposal of FW is essential for reusing value-added products, environmental protection, and human health. Based on the typical characteristics of high moisture content and high organic content of FW, hydrothermal treatment (HTT), as a novel thermochemical treatment technology, plays unique effects in the disposal and utilization of FW. The HTT of FW has attracted more and more attention in recent years, however, there are few conclusive reviews about the progress of the HTT of FW. HTT is an excellent approach to converting energy-rich materials into energy-dense fuels and valuable chemicals. This process can handle biomass with relatively high moisture content and allows efficient heat integration. This mini-review presents the current knowledge of recent advances in HTT of FW. The effects of HTT temperature and duration on organic nutritional compositions (including carbohydrates, starch, lipids, protein, cellulose, hemicellulose, lignin, etc.) and physicochemical properties (including pH, elemental composition, functional groups, fuel properties, etc.) and structural properties of FW are evaluated. The compositions of FW can degrade during HTT so that the physical and chemical properties of FW can be changed. The application and economic analyses of HTT in FW are summarized. Finally, the analyses of challenges and future perspectives on HTT of FW have shown that industrial reactors should be built effectively, and techno-economic analysis, overall energy balance, and life cycle assessment of the HTT process are necessary. The mini-review offers new approaches and perspectives for the efficient reuse of food waste.

New trends on green energy and environmental technologies, with special focus on biomass valorization, water and waste recycling: editorial of the special issue

In this editorial piece, the Editors of the Virtual Special Issue (VSI) "New Trends on Green Energy and Environmental Technologies, with Special Focus on Biomass Valorization, Water and Waste Recycling", present summarized data corresponding to the accepted submissions, as well as additional comments regarding the thematic of the VSI. Overall, 83 manuscripts were received, with final publication of those having the highest quality, accepted after peer-reviewing. The Editors think that the result is a set of very interesting papers that increase the knowledge on the matter, and which would be useful for researchers and the whole society.

Hydrothermal conversion of Chinese cabbage residue for sustainable agriculture: Influence of process parameters on hydrochar and hydrolysate

The demands on novel and sustainable techniques for vegetable waste (VW) valorization continues to increase during the past few decades due to the growing waste production under the flourishing vegetable industries. In this study, Chinese cabbage residues were hydrothermal carbonization (HTC) at 180, 200, 220 and 240 °C for 2 to 6 h to explore the impacts of process parameters on the characteristics of hydrochars and hydrolysates and their feasibility in sustainable agriculture. Results indicated that hydrothermal temperature had a greater impact on cabbage residue hydrolysis than the residence time. With the rising reaction severity, hydrochars became more alkaline with higher amount of ash and carbon (C), while the pH and dissolved organic nitrogen (DON) and NH₄⁺-N in the hydrolysate were gradually reduced. The thermogravimetric analysis (TG-DTG) indicated that organic constitutions in the feedstock went through incomplete decomposition. Although the recalcitrance index (R50) steadily increased through HTC (0.37-0.46), hydrochars were unstable and would not applicable for carbon sequestration. Furthermore, hydrochars and hydrolysate would be optimal media for plants seedling and growth for the abundant nutrients and dissolved organic compounds but reduced phytotoxicity. In conclusion, these results showed that HTC is highly applicable for vegetable waste management for sustainable agriculture.

A review on disposal and utilization of phytoremediation plants containing heavy metals

The reasonable disposal of plant biomass containing heavy metals (HMs) is a difficult problem for the phytoremediation technology. This review summarizes current literature that introduces various disposal and utilization methods (heat treatment, extraction treatment, microbial treatment, compression landfill, and synthesis of nanomaterials) for phytoremediation plants with HMs. The operation process and technical parameters of each disposal method are different. HMs can migrate and transform in different disposal processes. Some disposal and utilization methods can get some by-products. The main purpose of this paper is to provide reference for technical parameters and characteristics of various disposal and utilization methods, so as to choose and use the appropriate method for the treatment of plant biomass containing HMs after phytoremediation.