Rapid colonization and biodegradation of untreated commercial polyethylene wrap by a new strain of Bacillus velezensis C5

Degradation and detoxification of 6PPD-quinone in water by ultraviolet-activated peroxymonosulfate: Mechanisms, byproducts, and impact on sediment microbial community

N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6PPD-Q) has been identified to induce acute toxicity to multifarious aquatic organisms at exceptionally low concentrations. The ubiquity and harmful effects of 6PPD-Q emphasize the critical need for its degradation from water ecosystems. Herein, we explored the transformation of 6PPD-Q by an ultraviolet-activated peroxymonosulfate (UV/PMS) system, focusing on mechanism, products and toxicity variation. Results showed that complete degradation of 6PPD-Q was achieved when the initial ratio of PMS and 6PPD-Q was 60:1. The quenching experiments and EPR tests indicated that SO4•- and •OH radicals were primarily responsible for 6PPD-Q removal. Twenty-one degradation products were determined through high-resolution orbitrap mass spectrometry, and it was postulated that hydroxylation, oxidative cleavage, quinone decomposition, ring oxidation, as well as rearrangement and deamination were the major transformation pathways of 6PPD-Q. Toxicity prediction revealed that all identified products exhibited lower acute and chronic toxicities to fish, daphnid and green algae compared to 6PPD-Q. Exposure experiments also uncovered that 6PPD-Q considerably reduced the community diversity and altered the community assembly and functional traits of the sediment microbiome. However, we discovered that the toxicity of 6PPD-Q degradation solutions was effectively decreased, suggesting the superior detoxifying capability of the UV/PMS system for 6PPD-Q. These findings highlight the underlying detrimental impacts of 6PPD-Q on aquatic ecosystems and enrich our understanding of the photochemical oxidation behavior of 6PPD-Q.

Efficiency of Microorganisms and Effectiveness of Biodegradation Techniques on LDPE Plastics: A Systematic Review

Introduction

The aim of the research was to demonstrate the efficiency of microorganisms and the effectiveness of biodegradation techniques on Low-density polyethylene (LDPE) plastics. The research question was: What is the efficiency of LDPE-degrading microorganisms and the effectiveness of biodegradation techniques?

Methods

The systematic review was based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Articles were obtained from Scopus, Web of Science (WOS), Embase, and Google Scholar. The DeCS/Mesh search terms were: Low-density polyethylene, efficiency, biodegradation, microbial consortia, fungi, bacteria. Inclusion criteria were: scientific articles that included bacteria, fungi, and microbial consortia reported as LDPE degraders that report the percentage of weight loss; articles published from January 2010 to October 2022, and publications in Spanish and English with open access. Exclusion criteria were: studies that do not report gravimetry, the biodegradation time of LDPE, and the genus or species of the polyethylene-degrading microorganism.

Results

Out of 483 studies found, 50 were included in this Systematic Review (SR). The most frequent study techniques were scanning electron microscopy (SEM), gravimetry, and fourier transform infrared spectroscopy (FTIR), and in the case of microorganisms, the most studied belonged to the genus Pseudomonas, Bacillus, and Aspergillus. Regarding the isolation place, the most frequent mentioned in the reviewed articles were landfill soil and sanitary landfill soil. The efficiency of LDPE-degrading microorganisms was higher in bacteria such as Enterobacter spp., Pantoea spp., Pseudomonas spp., Escherichia coli, and Bacillus spp., which obtained a range of DE of 9.00-70.00%, 24.00-64%, 1.15 - 61.00%, 45.00%, and 1.5-40% with DT of 4-150, 120, 4-150, 30, and 30-120 days, respectively; in the case of fungi, the main microorganisms are Neopestalotiopsis phangngaensis, Colletotrichum fructicola, and Thyrostroma jaczewskii with efficiencies of 54.34, 48.78, and 46.34%, in 90 days, respectively; and the most efficient microbial consortia were from Enterobacter spp. and Pantoea sp. with 38.00 - 81.00%, in 120 days; and, Pseudomonas protegens, Stenotrophomonas sp., B. vallismortis and Paenibacillus sp. with 55. 00 - 75.00% in 120 days.

Conclusions

The most efficient microorganisms in LDPE degradation are Enterobacter spp., Pantoea spp., Pseudomonas spp., Escherichia coli, and Bacillus spp.; in fungi Neopestalotiopsis phangngaensis, Colletotrichum fructicola, and Thyrostroma jaczewskii; and in microbial consortia, those formed by Enterobacter spp. and Pantoea sp., and that of P. protegens, Stenotrophomonas sp., B. vallismortis and Paenibacillus sp.; and the most effective techniques used in LDPE biodegradation are SEM, gravimetry, and FTIR.

Genome analysis of a newly isolated Bacillus velezensis-YW01 for biodegrading acetaldehyde

Acetaldehyde (AL), a primary carcinogen, not only pollutes the environment, but also endangers human health after drinking alcohol. Here a promising bacterial strain was successfully isolated from a white wine cellar pool in the province of Shandong, China, and identified as Bacillus velezensis-YW01 with 16 S rDNA sequence. Using AL as sole carbon source, initial AL of 1 g/L could be completely biodegraded by YW01 within 84 h and the cell-free extracts of YW01 has also been detected to biodegrade the AL, which indicate that YW01 is a high-potential strain for the biodegradation of AL. The optimal culture conditions and the biodegradation of AL of YW01 are at pH 7.0 and 38 °C, respectively. To further analyze the biodegradation mechanism of AL, the whole genome of YW01 was sequenced. Genes ORF1040, ORF1814 and ORF0127 were revealed in KEGG, which encode for acetaldehyde dehydrogenase. Furthermore, ORF0881 and ORF052 encode for ethanol dehydrogenase. This work provides valuable information for exploring metabolic pathway of converting ethanol to AL and subsequently converting AL to carboxylic acid compounds, which opened up potential pathways for the development of microbial catalyst against AL.

A novel bacterial combination for efficient degradation of polystyrene microplastics

This study aimed to investigate the combined decomposition of polystyrene (PS) microplastics using three bacterial cultures: Stenotrophomonas maltophilia, Bacillus velezensis, and Acinetobacter radioresistens. The ability of all three strains to grow on medium containing PS (Mn 90,000 Da, Mw 241,200 Da) microplastics as the sole carbon source was examined. After 60 days of A. radioresistens treatment, the maximum weight loss of the PS microplastics was found to be 16.7 ± 0.6% (half-life 251.1 d). After 60 days of treatment with S. maltophilia and B. velezensis, the maximum weight loss of PS microplastics was 43.5 ± 0.8% (half-life 74.9 d). After 60 days of treatment with S. maltophilia, B. velezensis, and A. radioresistens, the weight loss of the PS microplastics was 17.0 ± 0.2% (half-life 224.2 d). The S. maltophilia and B. velezensis treatment showed a more significant degradation effect after 60 days. This result was attributed to interspecific assistance and interspecific competition. Biodegradation of PS microplastics was confirmed using scanning electron microscopy, water contact angle, high-temperature gel chromatography, Fourier transform infrared spectroscopy and thermogravimetric analysis. This study is the first to explore the degradation ability of different bacterial combinations on PS microplastics, providing a reference for future research on the biodegradation technology of mixed bacteria.

A computational approach to optimising laccase-mediated polyethylene oxidation through carbohydrate-binding module fusion

Plastic pollution is a major global concern to the health and wellbeing of all terrestrial and marine life. However, no sustainable method for waste management is currently viable. This study addresses the optimisation of microbial enzymatic polyethylene oxidation through rational engineering of laccases with carbohydrate-binding module (CBM) domains. An explorative bioinformatic approach was taken for high-throughput screening of candidate laccases and CBM domains, representing an exemplar workflow for future engineering research. Molecular docking simulated polyethylene binding whilst a deep-learning algorithm predicted catalytic activity. Protein properties were examined to interpret the mechanisms behind laccase-polyethylene binding. The incorporation of flexible GGGGS(x3) hinges were found to improve putative polyethylene binding of laccases. Whilst CBM1 family domains were predicted to bind polyethylene, they were suggested to detriment laccase-polyethylene associations. In contrast, CBM2 domains reported improved polyethylene binding and may thus optimise laccase oxidation. Interactions between CBM domains, linkers, and polyethylene hydrocarbons were heavily reliant on hydrophobicity. Preliminary polyethylene oxidation is considered a necessity for consequent microbial uptake and assimilation. However, slow oxidation and depolymerisation rates inhibit the large-scale industrial implementation of bioremediation within waste management systems. The optimised polyethylene oxidation of CBM2-engineered laccases represents a significant advancement towards a sustainable method of complete plastic breakdown. Results of this study offer a rapid, accessible workflow for further research into exoenzyme optimisation whilst elucidating mechanisms behind the laccase-polyethylene interaction.

Assembly strategies for polyethylene-degrading microbial consortia based on the combination of omics tools and the "Plastisphere"

Numerous microorganisms and other invertebrates that are able to degrade polyethylene (PE) have been reported. However, studies on PE biodegradation are still limited due to its extreme stability and the lack of explicit insights into the mechanisms and efficient enzymes involved in its metabolism by microorganisms. In this review, current studies of PE biodegradation, including the fundamental stages, important microorganisms and enzymes, and functional microbial consortia, were examined. Considering the bottlenecks in the construction of PE-degrading consortia, a combination of top-down and bottom-up approaches is proposed to identify the mechanisms and metabolites of PE degradation, related enzymes, and efficient synthetic microbial consortia. In addition, the exploration of the plastisphere based on omics tools is proposed as a future principal research direction for the construction of synthetic microbial consortia for PE degradation. Combining chemical and biological upcycling processes for PE waste could be widely applied in various fields to promote a sustainable environment.

In vivo degradation of polyethylene terephthalate using microbial isolates from plastic polluted environment

Accumulation of plastics alarms a risk to the environment worldwide. As polyethylene pterephthalate (PET) degrades slowly and produces hazardous substances, therefore, it is now essential to eliminate plastic wastes from the environment. Given that, the current study is concerned with PET degradation potential of naturally occurring microbial strains isolated from plastic waste dumping sites, Sarcina aurantiaca (TB3), Bacillus subtilis (TB8), Aspergillus flavus (STF1), Aspergillus niger (STF2). To test the biodegradability of PET films, the films were incubated for 60 days at 37 °C with the microorganisms designated as TB3, TB8, STF1, STF2 and the microbial consortium (TB3+TB8+STF1+STF2) in Minimal Salt Medium and Bushnell Hass Broth. Hydrophobicity, viability, and total protein content of isolates were investigated. Using Field Emission Scanning Electron Microscopy and Fourier Transform Infrared Spectrophotometry to measure variations in functional groups and carbonyl index on PET surface, biodegradation process was affirmed by fissures and modified surfaces. Results revealed that the microbial consortium (S. aurantiaca + B. subtilis + A. flavus + A. niger) that the weight loss of PET films was 28.78%. The microbial consortium could be used to treat PET waste, posing no health or environmental risks. The developed microbial consortium has the potential to degrade PET, hence can be employed for eliminating PET in plastic contaminated sites.