Quinones contained in wastewater as redox mediators for the synergistic removal of azo dye in microbial fuel cells

Insights to the cooperation of double-working potential electroactive biofilm for performance of sulfamethoxazole removal: ARG fate and microorganism communities

Bioelectrochemical systems (BESs) have shown great potential in enhancing sulfamethoxazole (SMX) removal. However, electroactive biofilms (EBs) constructed with single potentials struggle due to limited biocatalytic activity, hindering deep SMX degradation. Here, we constructed a double-working potential BES (BES-D) to investigate its ability to eliminate SMX and reduce the levels of corresponding antibiotic resistance genes (ARGs). The preferable electrochemical activity of EB in BES-D was confirmed by electrochemical characterization, EPS analysis, physical structure, viability of the biofilm, and cytochrome content. BES-D exhibited a notably greater SMX removal efficiency (94.2 %) than did the single-working potential BES (BES-S) and the open-circuit group (OC). Degradation pathway analysis revealed that the cooperative EB could accelerate the in-depth removal of SMX. Moreover, EB interaction in BES-D decreased the relative abundance of ARGs in biofilms compared to that in BES-S, although the absolute number of ARG copies increased in BES-D effluents. Compared to those in BES-S and OC, more complex cross-niche microbial associations in the EB of BES-D were observed by network analysis of the bacterial community and ARG hosts, enhancing the degradation efficiency of SMX. In conclusion, BES-D has significant potential for SMX removal and the enhancement of EB activity. Nonetheless, the risk of ARG dissemination in effluent remains a concern.

Towards environmentally-friendly solutions for real textile-dyeing wastewater with energy recovery: Effluent recirculation and Rubia plant-derived purpurin electron mediator in microbial fuel cell

Escalating global water pollution exacerbated by textile-dyeing wastewater (TDW) poses significant environmental and health concerns due to the insufficient treatment methods being utilized. Thus, it is imperative to implement more effective treatment solutions to address such issues. In this research, different environmentally-friendly strategies involving effluent recirculation (ER) and Rubia cordifolia plant-derived purpurin electron mediator (EM) were introduced to enhance the treatment of real TDW and bioelectricity generation performance of an anti-gravity flow microbial fuel cell (AGF-MFC). The results revealed that optimum performance was achieved with a combination of hydraulic retention time (HRT) of 48 h with a recirculation ratio of 1, where the reduction efficiency of biochemical oxygen demand (BOD5), chemical oxygen demand (COD), ammonium (NH4+), nitrate (NO3-), sulphate (SO42-), ammonia nitrogen (NH3-N), colour and turbidity were 82.17 %, 82.15 %, 85.10 %, 80.52 %, 75.91 %, 59.52 %, 71.02 % and 93.10 %, respectively. In terms of bioelectricity generation performance, AGF-MFC showed a maximum output voltage and power density of 404.72 mV and 65.16 mW/m2, respectively. Moreover, the results also signified that higher treatment performance of TDW was obtained with natural purpurin from Rubia cordifolia plant than synthetic purpurin as EM. The reduced reactivity of highly stable synthetic purpurin EM for mediating the electron transfer was a contributing factor to the outperformance of plant-derived purpurin. Additionally, detailed electron-mediating mechanisms of purpurin were proposed to unravel the underlying electron transfer pathway involved in AGF-MFC. This research offers insight into the development of more sustainable solutions for managing TDW, and consequently reducing environmental pollution.

Targeted Formation of Biofilms on the Surface of Graphite Electrodes as an Effective Approach to the Development of Biosensors for Early Warning Systems

Biofilms based on bacteria Pseudomonas veronii (Ps. veronii) and Escherichia coli (E. coli) and yeast Saccharomyces cerevisiae (S. cerevisiae) were used for novel biosensor creation for rapid biochemical oxygen demand (BOD) monitoring. Based on the electrochemical measurement results, it was shown that the endogenous mediator in the matrix of E. coli and Ps. veronii biofilms and ferrocene form a two-mediator system that improves electron transport in the system. Biofilms based on Ps. veronii and E. coli had a high biotechnological potential for BOD assessment; bioreceptors based on such biofilms had high sensitivity (the lower limits of detectable BOD5 concentrations were 0.61 (Ps. veronii) and 0.87 (E. coli) mg/dm3) and high efficiency of analysis (a measurement time 5-10 min). The maximum biosensor response based on bacterial biofilms has been observed in the pH range of 6.6-7.2. The greatest protective effect was found for biofilms based on E. coli, which has high long-term stability (151 days for Ps. veronii and 163 days for E. coli). The results of the BOD5 analysis of water samples obtained using the developed biosensors had a high correlation with the results of the standard 5-day method (R2 = 0.9820, number of tested samples is 10 for Ps. veronii, and R2 = 0.9862, number of tested samples is 10 for E. coli). Thus, biosensors based on Ps. veronii biofilms and E. coli biofilms could be a novel analytical system to give early warnings of pollution.

Insight into the role of biogenic manganese oxides-assisted gravity-driven membrane filtration systems toward emerging contaminants removal

Effective water purification technologies are required to remove emerging contaminants (ECs) and prevent their extensive occurrence in rural areas. In this work, coupling gravity-driven membrane (GDM) filtration with biogenic manganese oxides (BioMnOx) in the biofouling layer was utilized for treating water containing SMX. Comparisons between BioMnOx-GDM (with BioMnOx) and Control-GDM (without BioMnOx) indicated that BioMnOx could significantly promote the removal of DOC, NH₄⁺-N, and fluorescent pollutants due to its strong oxidating capacity and high biological activity. The formation of BioMnOx increased the abundance of SMX-degrading bacteria, enriched the metabolic pathway and mineralization rate of SMX, and effectively promoted the remove of SMX. More importantly, BioMnOx facilitated the removal of antibiotic resistance genes (ARGs) in the GDM, because it increased the link between microorganisms and reduced the concentration of SMX, thus reduced the expression of ARGs. LB-EPS played an important role in the membrane fouling. Compared with the Control-GDM, the concentration of LB-EPS in BioMnOx-GDM decreased, which was beneficial to alleviate membrane fouling. Although a thicker biofouling layer (1774.88 μm vs.775.54 μm) was formed in BioMnOx-GDM, the biofilm with higher porosity (64.93% vs. 41.24%) had a more positive effect on the flux. Overall, BioMnOx could improve the pollutant removal and stable flux level of the GDM system. BioMnOx-GDM effectively avoided the risks brought by ECs and ensured water safety in rural areas.

N-acyl-homoserine lactones in extracellular polymeric substances from sludge for enhanced chloramphenicol-degrading anode biofilm formation in microbial fuel cells

Exploring an efficient acclimation strategy to obtain robust bioanodes is of practical significance for antibiotic wastewater treatment by bioelectrochemical systems (BESs). This study investigated the effects of two acclimation conditions on chloramphenicol (CAP)-degrading anode biofilm formation in microbial fuel cells (MFCs). The one was continuously added the extracellular polymeric substances (EPS) extracted from anaerobic sludge and increasing concentrations of CAP after the first start-up phase, while the other was added the EPS-1 (N-acyl-homoserine lactones, namely AHLs were extracted from the EPS) at the same conditions. The results demonstrated that AHLs in the sludge EPS played a crucial role for enhanced CAP-degrading anode biofilm formation in MFCs. The AHL-regulation could not only maintain stable voltage outputs but also significantly accelerate CAP removal in the EPS MFC. The maximum voltage of 653.83 mV and CAP removal rate of 1.21 ± 0.05 mg/L·h were attained from the EPS MFC at 30 mg/L of CAP, which were 0.84 and 1.57 times higher than those from the EPS-1 MFC, respectively. These improvements were largely caused by the thick and 3D structured biofilm, strong and homogeneous cell viability throughout the biofilm, and high protein/polysaccharide ratio along with more conductive contents in the biofilm EPS. Additionally, AHLs facilitated the formation of a biofilm with rich biodiversity and balanced bacterial proportions, leading to more beneficial mutualism among different functional bacteria. More bi-functional bacteria (for electricity generation and antibiotic resistance/degradation) were specifically enriched by AHLs as well. These findings provide quorum sensing theoretical knowledge and practical instruction for rapid antibiotic-degrading electrode biofilm acclimation in BESs.

Facile fabrication of composite cellulose fibrous materials for efficient and consecutive dyeing wastewater treatment

Fabricating dye adsorbents with efficient adsorption properties is of great significance in the treatment of printing and dyeing wastewater. Herein, composite materials of polydopamine decorated cellulose fibrous nonwovens (PDA@CF NWs) were fabricated by constructing a PDA functional layer on the surface of cellulose fibers via in situ polymerization. In addition, a three-dimensional adsorbent of 3D PDA@CF NWs with good hydrophilicity, structural stability, and compression resistance could be obtained using a facilely laminating and traditional loop bonding reinforcing technique. Attributed to the efficient and uniform loading of an active PDA functional layer, the resulting PDA@CF NWs exhibited a relatively large adsorption capacity of around 91 mg g⁻¹ towards the template dye of methylene blue within a fast equilibrium time of 2 h, which was superior to most of the fibrous adsorbents. In addition, the treatment column of 3D PDA@CF NWs exhibited a breakthrough capacity of 40.9 mg g⁻¹, reaching nearly 50% of the static saturated dye-binding capacity. More importantly, the 3D PDA@CF NWs column could effectively and continuously separate the mixture of different dyes under gravity, highlighting an excellent practical performance. Thus, the PDA@CF NWs are expected to provide a promising candidate for environment-friendly, large-scale and efficient treatment of industrial printing and dyeing wastewater.

Composite materials of polydopamine decorated cellulose fibrous nonwovens were fabricated for efficient and consecutive dyeing wastewater treatment.