Recent advancements on biochars enrichment with ammonium and nitrates from wastewaters: A critical review on benefits for environment and agriculture

Organic particles and high pH in food waste anaerobic digestate enhanced NH4+ adsorption on wood-derived biochar

Biogas residues (i.e., digestate) are rich in NH4+ that has great agricultural value but environmental risk if not recycled. Biochar can be an effective adsorbent retaining NH4+ from digestate. However, it remains unclear how the unique composition of digestate affects the capacity and mechanisms of NH4+ adsorption on biochar. This study examined the mechanisms and driving factors of NH4+ recovery from digestate containing different molecular-weight organic particles by using wood-derived biochar with or without H2O2 modification. Four solutions were prepared, including pure NH4+, synthetic NH4+ with multiple cations mimicking digestate solution, supernatant of digestate with small organic particles and dissolved organic matter, and digestate mixture containing supernatant and large organic particles. The results showed that compared with pure NH4+ solution, the adsorbed NH4+ was 42% lower in the synthetic NH4+ solution with multiple cations but was 2.2 time higher in the supernatant of digestate on two biochars following 48-h adsorption. Modified biochar did not change NH4+ adsorption in pure NH4+ solution despite higher specific surface area than raw biochar, but it increased the adsorption of NH4+ in digestate solutions with high pH (e.g., 4.03 vs. 3.37 mg N g-1 for modified and raw biochar, respectively, in the supernatant of digestate). Compared with the supernatant, the large organic particles in digestate mixture significantly but slightly decreased NH4+ adsorption on modified but not raw biochar. The desorption rate of NH4+ on the biochar was up to 74%-100%, and it was not supressed by the adsorption of organic particles in digestate. The findings here demonstrate the dominant role of electrostatic attraction in NH4+ adsorption, the important role of high pH and organic particles in digestate in facilitating NH4+ adsorption on biochar, and the suitability of the wood-derived biochar in recovering NH4+ from digestate and releasing N for agricultural application.

Pistia stratiotes L. Biochar for Sorptive Removal of Aqueous Inorganic Nitrogen

Biochar has proven effective in the remediation of excess nitrogen from soil and water. Excess nitrogen from agricultural fields ends up in aquatic systems and leads to reduced water quality and the proliferation of invasive species. This study aimed to assess the efficiency of chemically surface-modified biochar produced from invasive Pistia stratiotes L. for the adsorption of inorganic nitrogen (NH4+ and NO3-). Biochar structure was investigated using scanning electron microscopy, energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and inductively coupled plasma mass spectrometry. The results from adsorption experiments indicate that NH4+ removal was optimal (0.8-1.3 mg N g-1) at near-neutral pH levels (6.0-7.5), while NO3- removal was optimal (0.4-0.8 mg N g-1) under acidic pH conditions (4.8-6.5) using the modified biochar. These findings highlight the significance of solution pH, biochar morphology, and surface chemistry in influencing the adsorption of NH4+ and NO3-. However, further studies are necessary to assess the potential oxidative transformation of NH4+ to NO3- by biochar, which might have contributed to the reduction in NH4+ in the aqueous phase.

Applications of engineered biochar in remediation of heavy metal(loid)s pollution from wastewater: Current perspectives toward sustainable development goals

Environmental pollution of heavy metal(loid)s (HMs) caused adverse impacts, has become one of the emerging concerns and challenges worldwide. Metal(loid)s can pose significant threats to living organisms even when present in trace levels within environmental matrices. Extended exposure to these substances can lead to adverse health consequences in humans. Removing HM-contaminated water and moving toward sustainable development goals (SDGs) is critical. In this mission, biochar has recently gained attention in the environmental sector as a green and alternative material for wastewater removal. This work provides a comprehensive analysis of the remediation of typical HMs by biochars, associated with an understanding of remediation mechanisms, and gives practical solutions for ecologically sustainable. Applying engineered biochar in various fields, especially with nanoscale biochar-aided wastewater treatment approaches, can eliminate hazardous metal(loid) contaminants, highlighting an environmentally friendly and low-cost method. Surface modification of engineered biochar with nanomaterials is a potential strategy that positively influences its sorption capacity to remove contaminants. The research findings highlighted the biochars' ability to adsorb HM ions based on increased specific surface area (SSA), heightened porosity, and forming inner-sphere complexes with oxygen-rich groups. Utilizing biochar modification emerged as a viable approach for addressing lead (Pb), cadmium (Cd), arsenic (As), mercury (Hg), and chromium (Cr) pollution in aqueous environments. Most biochars investigated demonstrated a removal efficiency >90 % (Cd, As, Hg) and can reach an impressive 99 % (Pb and Cr). Furthermore, biochar and advanced engineered applications are also considered alternative solutions based on the circular economy.

Activation of peroxymonosulfate with natural pyrite-biochar composite for sulfamethoxazole degradation in soil: Organic matter effects and free radical conversion

Peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs) represent an effective method for the remediation of antibiotic-contaminated soils. In this study, a natural pyrite-biochar composite material (FBCx) was developed, demonstrating superior activation performance and achieving a 76% removal rate of SMX from soil within 120 min. There existed different degradation mechanisms for SMX in aqueous and soil solutions, respectively. The production of 1O2 and inherent active species produced by soil slurry played an important role in the degradation process. The combination of electron paramagnetic resonance (EPR) and free radical probe experiments confirmed the presence of free radical transformation processes in soil. Wherein, the·OH and SO4·- generated in soil slurry did not directly involve in the degradation process, but rather preferentially reacted with soil organic matter (SOM) to form alkyl-like radicals (R·), thereby maintaining a high concentration of reactive species in the system. Furthermore, germination and growth promotion of mung bean seeds observed in the toxicity test indicated the environmental compatibility of this remediation method. This study revealed the influence mechanism of SOM in the remediation process of contaminated soil comprehensively, which possessed enormous potential for application in practical environments.

Enhancing the nitrogen and phosphorus content of faecal-derived biochar via adsorption and precipitation from human urine

Urine diversion in toilets is a promising strategy to maximise nutrient recovery and produce low-cost urine-derived fertilisers. There are various methods for nutrient recovery from urine, including precipitation and adsorption onto porous media, such as biochars. This study uses faecal-derived biochars to produce and, for the first time, comprehensively characterise enriched biochar fertilisers with the addition of fully hydrolysed undiluted human urine. The evolution of urea hydrolysis and nutrient content during urine storage was initially investigated over a 6-month storage period and NH4+ adsorption mechanisms studied under varying biochar doses and NH4-N concentrations. The process was further optimised by adding MgO to induce precipitation reactions, enabling the combined recovery of NH4+ and P. For NH4+ adsorption, experimental data exhibited a good fit to both the Freundlich (R2 = 0.989) and Langmuir (R2 = 0.974) isotherm models and the rate of the reaction was well described by a pseudo 2nd order kinetics model (R2 = 0.988). The NH4+ uptake was rapid during the initial 2 h of the reaction and the adsorption process reached completion after 24 h. The NH4-N adsorption capacity of the faecal-derived biochar was 19.8 mg/g and the main adsorption mechanism identified was ion exchange (K+ ↔ NH4+), as confirmed by XRD and ICP-OES. The effect of different biochar doses (0, 25, 50, 100 g/L) and MgO addition scenarios (Mg:P = 0, 1.5, 4) on N and P recovery showed that the combination of MgO (Mg:P = 1.5) with the lower biochar dose (25 g/L) produced the most NP-rich fertiliser product which was easily separated from the urine. Faecal-derived biochar had a limited adsorption capacity for P, with precipitation being the main mechanism for P recovery. When MgO was added to urine, >98% of total P was recovered via precipitation of struvite/struvite-K and substituted hydroxyapatite, as identified via SEM-EDX. Faecal-derived biochar was a successful carrier to recover the P-containing precipitates and facilitate liquid-solid separation after treatment. The findings of this study provide proof-of concept for the systemic management of source separated human excreta and pave the way for the production of marketable waste-derived fertilisers from on-site sanitation systems.

Mobilisation of textile waste to recover high added value products and energy for the transition to circular economy

The textile industry is a major contributor to global waste, with millions of tons of textiles being discarded annually. Material and energy recovery within circular economy offer sustainable solutions to this problem by extending the life cycle of textiles through repurposing, recycling, and upcycling. These initiatives not only reduce waste but also contribute to the reduction of the demand for virgin materials (i.e. cotton, wool), ultimately benefiting the environment and society. The circular economy approach, which aims to recreate environmental, economic, and societal value, is based on three key principles: waste reduction, material circulation, and ecological restoration. Given these difficulties, circularity incorporates the material recovery approach, which is focused on the conversion of waste into secondary raw resources. The goal of this notion is to extract more value from resources by prolonging final disposal as long as feasible. When a textile has outlived its functional life, material recovery is critical for returning the included materials or energy into the manufacturing cycle. The aim of this paper is to examine the material and energy recovery options of main raw materials used in the fashion industry while highlighting the need of close observation of the relation between circularity and material recovery, including the investigation of barriers to the transition towards a truly circular fashion industry. The final results refer to the main barriers of circular economy transition within the industry and a framework is proposed. These insights are useful for academia, engineers, policy makers and other key stakeholders for the clear understanding of the industry from within and highlight beyond circular economy targets, SDGs interactions with energy and material recovery of textile waste (SDG 7, SDG 11, SDG 12 etc.).

Recent developments in metallic-nanoparticles-loaded biochars synthesis and use for phosphorus recovery from aqueous solutions. A critical review

Phosphorus (P) represents a major pollutant of water resources and at the same time a vital element for human and plants. P recovery from wastewaters and its reuse is a necessity in order to compensate the current important depletion of P natural reserves. The use of biochars for P recovery from wastewaters and their subsequent valorization in agriculture, instead of synthetic industrial fertilizers, promotes circular economy and sustainability concepts. However, P retention by pristine biochars is usually low and a modification step is always required to improve their P recovery efficiency. The pre- or post-treatment of biochars with metal salts seems to be one of the most efficient approaches. This review aims to summarize and discuss the most recent developments (from 2020- up to now) in: i) the role of the feedstock nature, the metal salt type, the pyrolysis conditions, and the experimental adsorption parameters on metallic-nanoparticles-loaded biochars properties and effectiveness in recovering P from aqueous solutions, as well as the dominant involved mechanisms, ii) the effect of the eluent solutions nature on the regeneration ability of P-loaded biochars, and iii) the practical challenges facing the upscaling of P-loaded biochars production and valorization in agriculture. This review shows that the synthesized biochars through slow pyrolysis at relatively high temperatures (up to 700-800 °C) of mixed biomasses with Ca- Mg-rich materials or impregnated biomasses with specific metals in order to from layered double hydroxides (LDHs) biochars composites exhibit interesting structural, textural and surface chemistry properties allowing high P recovery efficiency. Depending on the pyrolysis's and adsorption's experimental conditions, these modified biochars may recover P through combined mechanisms including mainly electrostatic attraction, ligand exchange, surface complexation, hydrogen bonding, and precipitation. Moreover, the P-loaded biochars can be used directly in agriculture or efficiently regenerated with alkaline solutions. Finally, this review emphasizes the challenges concerning the production and use of P-loaded biochars in a context of circular economy. They concern the optimization of P recovery process from wastewater in real-time scenarios, the reduction of energy-related biochars production costs and the intensification of communication/dissemination campaigns to all the concerned actors (i.e., farmers, consumers, stakeholders, and policymakers) on the benefits of P-loaded biochars reuse. We believe that this review is beneficial for new breakthroughs on the synthesis and green application of metallic-nanoparticles-loaded biochars.

Abattoir residues as nutrient resources: Nitrogen recycling with bone chars and biogas digestates

Abattoirs produce by-products that may become valuable resources for nutrient recycling and energy generation by including pyrolysis and biogas production in the value creation chain. This study investigated the potential of bone chars as sorbents for ammonium in order to produce a soil amendment useful for fertilizing purposes. Ammonium enriched from the digestate by membrane distillation or from pure ammonium sulphate solutions accommodated the nitrogen sorption to the bone chars. The plant availability of the sorbed nitrogen was studied by a standardized short-term plant test with rye (Secale cereale L.). The results showed that ammonium, both from biogas digestate and from pure salt solutions, could be sorbed successfully to the bone chars post-pyrolysis and increased the nitrogen concentration of the chars (1.6 ± 0.3%) by 0.2-0.4%. This additional nitrogen was desorbed easily and supported plant growth (+17 to +37%) and plant nitrogen uptake (+19-74%). The sorption of ammonium to the bone chars had a positive effect on the reversal of pure bone char phytotoxicity and on nitrogen availability. In summary, this study showed that abattoir wastes are useful pyrolysis input materials to produce bone chars and to provide ammonium source for sorption to the chars. This innovation offers the possibility to produce nitrogen-enriched bone chars as a new type of fertilizer that upgrades the known value of bone char as phosphorus fertilizer by an additional nitrogen fertilizer effect.

Nitrogen retention potentials of magnesium oxide- and sepiolite-modified biochars and their impacts on bacterial distribution under nitrogen fertilization

Mitigating the loss and negative impacts of reactive N from fertilized soils remains a global environmental challenge. To optimize N retention by biochar, bamboo and pig manure biochars were modified as MgO- and sepiolite-biochar composites and characterized. Novel soil application of the modified biochars and their raw forms were comparatively evaluated for N-retention in a fertilized soil leached for 90 days in a column experiment. Changes in N-cycling-related enzyme and bacterial structure were also reported after 90 days. Results revealed low leaching losses of NH₄⁺, which reduced over time across all the treatments. However, while sole fertilizer (F) increased the initial and cumulative NO₃^- leached from the soil, the MgO-bamboo biochar (MgOBF) and sepiolite-bamboo biochar (SBF) treatments reduced leachate NO₃^- by 22.1 % and 10.5 % compared to raw bamboo biochar (BBF) treatment. However, 15.5 % more NO₃^- was leached from the MgO-pig manure biochar-treated soil (MgOPF) compared to its raw biochar treatment (PMBF) after 90 days. Dissolved organic N leached was reduced by 9.2 % and 0.5 % in MgOBF and SBF, as well as 15.4 % and 40.5 % in MgOPF and SPF compared to their respective raw forms. The total N of the biochars, adjustment of surface charges, cation exchange capacity, surface area, pore filling effects, and the formation of potential MgN precipitates on the modified-biochar surfaces regulated N leaching/retention. In addition, the modified biochar treatments reduced the hydrolysis of urea and stimulated some nitrate-reduction-related bacteria crucial for NO₃^- retention. Hence, unlike the raw biochar and MgOPF treatments, MgOBF, SBF, and SPF hold promise in mitigating inorganic-N losses from fertilized soils while improving the soil's chemical properties.

Nitrogen availability in biochar-based fertilizers depending on activation treatment and nitrogen source

Different activation and N-doping treatments were used to produce biochar-based fertilizers (BBFs) with increased N concentration and slow N release. Pristine biochars were produced by pyrolysis of olive tree pruning feedstock at low and high temperatures (400 and 800 °C). These biochars were activated either by ultrasonication, or oxidation with hydrogen peroxide (H₂O₂) or nitric acid (HNO₃) to increase their N retention potential. Subsequently biochars were enriched with N with either urea or ammonium sulfate. The activation of low-temperature biochars with HNO₃ was the most effective treatment leading to new surface carboxylic groups that facilitated the later enrichment with N. When treated with urea, BBFs reached 7.0 N%, whereas the H₂O₂ activation only allowed an increase up to 2.0 N%. The use of urea as the external N source was the most efficient for incorporating N. Urea treated biochars had a water-soluble fraction that represented up to 14.5 % of the total N. The hydrolyzable N fraction, composed by amides and simple N heterocycles originated by the N-doping treatments, and nitro groups generated from HNO₃ activation, represented up to 60 % of the total N. This study relates the N chemical forms in the new BBFs to potential N availability in soil. The presence of water-soluble, hydrolyzable and non-hydrolyzable N implied that these BBFs may supply N that would be progressively available for plants, acting as slow-release fertilizers.

Closing the Nutrient Loop-The New Approaches to Recovering Biomass Minerals during the Biorefinery Processes

The recovery of plant mineral nutrients from the bio-based value chains is essential for a sustainable, circular bioeconomy, wherein resources are (re)used sustainably. The widest used approach is to recover plant nutrients on the last stage of biomass utilization processes-e.g., from ash, wastewater, or anaerobic digestate. The best approach is to recover mineral nutrients from the initial stages of biomass biorefinery, especially during biomass pre-treatments. Our paper aims to evaluate the nutrient recovery solutions from a trans-sectorial perspective, including biomass processing and the agricultural use of recovered nutrients. Several solutions integrated with the biomass pre-treatment stage, such as leaching/bioleaching, recovery from pre-treatment neoteric solvents, ionic liquids (ILs), and deep eutectic solvents (DESs) or integrated with hydrothermal treatments are discussed. Reducing mineral contents on silicon, phosphorus, and nitrogen biomass before the core biorefinery processes improves processability and yield and reduces corrosion and fouling effects. The recovered minerals are used as bio-based fertilizers or as silica-based plant biostimulants, with economic and environmental benefits.

Lead removal from aqueous solutions by olive mill wastes derived biochar: Batch experiments and geochemical modelling

In this study, lead removal from aqueous solutions using biochar derived from olive mill solid and liquid wastes has been investigated by applying batch experiments and geochemical modelling. The batch adsorption experiments included the assessment of several key parameters such as the contact time (kinetic), initial concentration (isotherm), pH, adsorbent dose, and the presence of competitive cations, whilst the geochemical modelling focused on the involved adsorption mechanisms using the PHREEQC code. The kinetic studies showed that lead adsorption is a relatively fast process, where intraparticle diffusion is the rate-limiting step. Biochar dose, solution pH and the presence of competitive ions significantly affected the Pb adsorption effectiveness by the biochar. Especially the higher Pb removal percentages were observed in mono-elemental solutions with high biochar dose at mildly acidic solution pH values. The maximum Pb adsorption capacity of biochar was estimated as 40.8 mg g^-1 which is higher than various biochars derived from sludge, lignocellulosic and animal biomasses. On the other hand, the geochemical modelling employing the PHREEQC code showed that ion exchange and Pb precipitation are the main reactions controlling its removal from aqueous solutions, whilst surface complexation is insignificant, mainly due to the low surface functional groups on the used biochar.

A re-analysis of NH4+ sorption on biochar: Have expectations been too high?

Sorption of nutrients such as NH₄⁺ is often quoted as a critical property of biochar, explaining its value as a soil amendment and a filter material. However, published values for NH₄⁺ sorption to biochar vary by more than 3 orders of magnitude, without consensus as to the source of this variability. This lack of understanding greatly limits our ability to use quantitative sorption measurements towards product design. Here, our objective was to conduct a quantitative analysis of the sources of variability, and infer which biochar traits are more favourable to high sorption capacity. To do so, we conducted a standardized remodelling exercise of published batch sorption studies using Langmuir sorption isotherm. We excluded studies presenting datasets that either could not be reconciled with the standard Langmuir sorption isotherm or generated clear outliers. Our analysis indicates that the magnitude of sorption capacity of unmodified biochar for NH₄⁺ is lower than previously reported, with a median of 4.2 mg NH₄⁺ g^-1 and a maximum reported sorption capacity of 22.8 mg NH₄⁺ g^-1. Activation resulted in a significant relative improvement in sorption capacity, but absolute improvements remain modest, with a maximum reported sorption of 27.56 mg NH₄⁺ g^-1 for an activated biochar. Methodology appeared to substantially impact sorption estimates, especially practices such as pH control of batch sorption solution and ash removal. Our results highlight some significant challenges in the quantification of NH₄⁺ sorption by biochar and our curated data set provides a potentially valuable scale against which future estimates can be assessed.

Conversion of Industrial Sludge into Activated Biochar for Effective Cationic Dye Removal: Characterization and Adsorption Properties Assessment

This paper presents an in-depth characterization of a raw industrial sludge (IS-R) and its KOH-activated biochar pyrolyzed at 750 °C (IS-KOH-B) followed by their application to remove a cationic dye from aqueous solution. Materials characterization shows that compared to the IS-R, the IS-KOH-B has improved structural, textural, and surface chemical properties. In particular, the IS-KOH-B’s BET surface area and total pore volume are about 78 and 6 times higher than those found for the IS-R, respectively. The activated biochar efficiently retained the cationic dye under wide experimental conditions. Indeed, for an initial dye concentration of 50 mg L−1, removal yields were assessed to be more than 92.5%, 93.5%, and 97.8% for a large pH range (4–10), in the presence of high contents of competing cations (3000 mg L−1 of Ca2+, Mg2+, Na+, and K+), and a low used adsorbent dose (1 g L−1), respectively. The Langmuir’s adsorption capacities were 48.5 and 65.9 mg g−1 for of IS-R and IS-KOH-B, respectively, which are higher than those reported for various adsorbents in the literature. The dye removal was found to be monolayer, spontaneous, and endothermic for both the adsorbents. Moreover, this removal process seems to be controlled by chemical reactions for IS-KOH-B whereas by both physico–chemical reactions for IS-R. This study demonstrates that the raw industrial sludge and especially its KOH-activated derived biochar could be considered as promising adsorbents for the removal of dyes from aqueous solutions.

Feasibility of Old Bark and Wood Waste Recycling

The pulp and paper industry leads to the formation of significant amounts of bark and wood waste (BWW), which is mostly dumped, causing negative climate and environmental impacts. This article presents an overview of methods for recycling BWW, as well as the results of assessing the resource potential of old bark waste based on physicochemical and thermal analysis. It was found that using BWW as a plant-growing substrate is challenging because it was observed that bark waste is phytotoxic. The C:N waste ratio is far from optimum; moreover, it has a low biodegradation rate (less than 0.15% per year). The calorific value content of BWW ranged from 7.7 to 18.9 MJ/kg on d.m., the ash content was from 4% to 22%, and the initial moisture content was from 60.8% to 74.9%, which allowed us to draw conclusions about the feasibility of using hydrothermal methods for their processing to obtain biofuel and for the unreasonableness of using traditional thermal methods (combustion, pyrolysis, gasification).

Use of Biochar in Asphalts: Review

The growth of the world population has increased the production of wastes. These are generally incinerated or deposited in outdoor landfills, which impacts the environment and affects human health. A technique that allows to reuse of wastes and diminishes adverse effects on the environment is pyrolysis. Through this technique, a material known as Biochar (BC) is produced, which has proven to have interesting physical-chemical properties for it to be used as an asphalt modifier, and simultaneously, helps to mitigate negative impacts on the environment. The foregoing article presents a bibliographical review on the use of BC as a modifier for asphalt binders and asphalt mixes. This has the purpose of becoming a starting point for future research efforts. In the reviewed literature, there was no review found on this topic. In general terms, BC increases the performance of asphalt binders in high-temperature climates, and tends to reduce its performance in low-temperature ones. Few studies have evaluated the performance of BC on asphalt mixes and the long-term properties associated with durability. Based on the reviewed literature, at the end of the article, recommendations are provided for future study topics.