Valorization of ball-milled waste red mud into heterogeneous catalyst as effective peroxymonosulfate activator for tetracycline hydrochloride degradation

Highly efficient degradation of acetaminophen via nano zero-valent iron biochar with periodate system at low temperature

The development of more efficient advanced oxidation systems for serving various advanced treatment of wastewater is quite necessary and urgent. In this study, a nano-zero valent iron/periodate (nZVI-BC/PI) advanced oxidation system has been constructed, achieving a rapid degradation of acetaminophen (ACT, 1 mg/L) within 1 min (100 % at pH = 11) at low temperature (5℃). This system shows a great degradation in a wide range of pH (1 ∼ 11), improving the pH limitation of PI oxidation system. During the reaction process, ·OH as the main active species collaborate with 1O2, Fe (IV), ·O2- and electron transfer to degrade ACT. In this system, iron ion leaching is low (0.019 mg/L), ACT was effectively degraded (74.36 %∼97.32 %) under different water, moreover, the material has an expected recyclability. The research provides a significant guidance for the advanced treatment of wastewater especially in cold regions.

A review of metallurgical slags as catalysts in advanced oxidation processes for removal of refractory organic pollutants in wastewater

With the rapid growth of the metallurgical industry, there is a significant increase in the production of metallurgical slags. The waste slags pose significant challenges for their disposal because of complex compositions, low utilization rates, and environmental toxicity. One promising approach is to utilize metallurgical slags as catalysts for treatment of refractory organic pollutants in wastewater through advanced oxidation processes (AOPs), achieving the objective of "treating waste with waste". This work provides a literature review of the source, production, and chemical composition of metallurgical slags, including steel slag, copper slag, electrolytic manganese residue, and red mud. It emphasizes the modification methods of metallurgical slags as catalysts and the application in AOPs for degradation of refractory organic pollutants. The reaction conditions, catalytic performance, and degradation mechanisms of organic pollutants using metallurgical slags are summarized. Studies have proved the feasibility of using metallurgical slags as catalysts for removing various pollutants by AOPs. The catalytic performance was significantly influenced by slags-derived catalysts, catalyst modification, and process factors. Future research should focus on addressing the safety and stability of catalysts, developing green and efficient modification methods, enhancing degradation efficiency, and implementing large-scale treatment of real wastewater. This work offers insights into the resource utilization of metallurgical slags and pollutant degradation in wastewater.

Acid-modified red mud biochar for the degradation of tetracycline: Synergistic effect of adsorption and nonradical activation

In this study, a novel acid-modified red mud biochar catalyst (MMBC) was synthesized by industrial waste red mud (RM) and peanut shell (PSL) to activate peroxodisulfate (PDS) for the degradation of TC. Meanwhile, MMBC exhibited remarkable adsorption capacity, reaching a 60% removal ratio of TC within 60 min (equilibrium adsorption capacity = 12 mg/g). After adding PDS, MMBC/PDS system achieved a 93.8% removal ratio of TC within 60 min. Quenching experiments and electron paramagnetic resonance (EPR) results showed that 1O2 played a dominant role in the degradation of TC and O2•- was the mainly precursor for the production of 1O2 in the MMBC/PDS system. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis showed that the surface Fe(II), -OH and -COOH provided the active sites for the activation of PDS by MMBC. In addition, acid modification optimised the surface structure of the catalyst and enhanced the conversion of Fe (mainly Fe(III) to Fe(II)), thereby improving the adsorption and catalytic efficiency of MMBC. This study confirmed that modified red mud biochar is an efficient composite with both adsorption and catalysis, providing new ideas for the practical treatment of antibiotic wastewater and the resource utilization of red mud.

Highly efficient catalytic ozonation degradation of levofloxacin by facile hydrogenation-modified red mud wastes

Iron-rich red mud (RM) is a potential catalyst. However, as industrial waste, is strongly alkaline, low effectiveness, and safety concerns are problems that cannot be ignored, it is urgent to mine out a reasonable disposal and utilization technology for the waste. In this study, an effective catalyst (H-RM) was obtained by facile hydrogenation heating modification of red mud. Then above-prepared H-RM was applied in the catalytic ozonation degradation of levofloxacin (LEV). The H-RM exhibited more remarkable catalytic activities than the RM in terms of LEV degradation, and the optimal efficiency can reach over 90% within 50 min. The mechanism experiment proved that the concentration of dissolved ozone and hydroxyl radical (•OH) significantly increased, which enhanced the oxidation effect. Hydroxyl radical played a dominant role in the degradation of LEV. In the safety test, it is concluded that the concentration of total hexavalent chromium (total Cr(Ⅵ)) in the H-RM catalyst decreases and the leaching concentration of water-soluble Cr(Ⅵ) in aqueous solution is low. The results indicated that the hydrogenation technique is an available Cr (Ⅵ) detoxification method for RM. Moreover, the H-RM has excellent catalytic stability, which is beneficial to recycling and maintains high activity. This research provides an effective means to fulfill the reuse of industrial waste as an alternative to standard raw materials, and comprehensive utilization of the waste to attain the purpose of treating pollution with wastes.

Wood induced preparation of Fe3C decorated biochar for peroxymonosulfate activation towards bisphenol a degradation with low ion leaching

Heterogeneous iron/persulfate system suffers from the problems of high ion leaching, severe catalyst surface corrosion and low performance stability. Herein, a series of iron compound incorporated N doped biochar composite catalysts were prepared from pyrolyzing wood powder and ferric ferrocyanide mixture, which were used for bisphenol A (BPA) degradation in water through peroxymonosulfate (PMS) activation. It was found that the reducing gases released from wood powder at different pyrolysis temperature significantly affected the crystalline phase of the iron compound in the catalyst, in which pure phase iron carbide (Fe₃C) decorated N doped biochar was obtained at pyrolysis temperature of 600 °C or higher. Wood powder was introduced as both Fe₃C formation inductive agent and biochar precursor. Fe₃C/biochar exhibited optimal BPA degradation performance, in which 0.5 g/L of catalyst could completely degrade 0.05 mM BPA within 30 min. Radical, high valent iron-oxo, and non-radical species were all generated in the reaction system by both Fe₃C and N doped biochar, respectively. Moreover, the multi-valence nature of Fe in Fe₃C enabled the reaction system with remarkably reduced Fe ion leaching and negligible iron sludge production since Fe₃C could activate PMS through a heterogeneous mechanism. Having multiple active species generated for BPA degradation, the prepared catalyst also showed promising adaptability and recyclability. This study can provide a new solution for the design of iron based catalyst/PMS system for organic pollutant degradations with low ion release.

Waste to energy: A review of biochar production with emphasis on mathematical modelling and its applications

United Nations charter to build a sustainable future has paved the way for the introduction of the Sustainability Development Goals (SDGs) at a global forum. In particular, SDG 11 is aligned with the idea of developing cities and communities that provide quality human life, by attaining net-zero discharge and self-sustainability. In line with the efforts of the global community, biochar has emerged as a viable solution due to its ability to convert waste into value. Finding applications in a spectrum of domains, biochar is being studied for use as an adsorbent, a co-catalyst to promote industrial-grade reactions and as a feed for fuel cells. Moreover, the inclusion of biochar as a soil enhancement material advocates the implementation of closed-loop nutrient cycles. Hence, it is imperative to have a proper understanding of the biomass characteristics, the hydrothermal treatment and the process parameters to be adopted for the production of char in order to identify biomass feedstock based on the application. The current work provides insight into the key factors and conditions employed for the production of biochar based on the plethora of applications. In order build a basic framework to aid in the production of char, the development of a statistical correlation was undertaken to determine the feed and optimum process parameters for the production of biochar based on its applications.