Impact of municipal solid waste incineration on heavy metals in the surrounding soils by multivariate analysis and lead isotope analysis

The physicochemical interacting mechanisms and real-time spectral induced polarization monitoring of lead remediation by an aeolian soil

Compared to traditional lead-remediating materials, natural-occurring paleosol is ubiquitous and could be a promising alternative due to its rich content in calcite, a substance known for its lead-removal ability via carbonate dissolution-PbCO3 precipitation process. Yet, the capability of paleosol to remediate aqueous solutions polluted with heavy metals, lead included, has rarely been assessed. To fill this gap, a series of column permeation experiments with influent Pb2+ concentrations of 2000, 200, and 20 mg/L were conducted and monitored by the spectral induced polarization technique. Meanwhile, the SEM-EDS, XRD, XPS, FTIR and MIP tests were carried out to unveil the underlying remediation mechanisms. The Pb-retention capacity of paleosol was 1.03 mmol/g. The increasing abundance of Pb in the newly-formed crystals was confirmed to be PbCO3 by XRD, SEM-EDS and XPS. Concurrently, after Pb2+ permeation, the decreasing calcite content in paleosol sample from XRD test, and the appearance of Ca2+ in the effluent confirmed that the dissolution of CaCO3 followed by the precipitation of PbCO3 was the major mechanism. The accumulated Pb (i.e., the diminished Ca) in paleosol was inversely proportional (R2 >0.82) to the normalized chargeability (mn), an SIP parameter denoting the quantity of polarizable units (primarily calcite).

Analysis of trace elements in processed products of grapes and potential health risk assessment

Raisins and grape pekmez are consumed commonly by human all over the globe. Consumption of contaminated foods may be the likely pathway of heavy metal exposure. Therefore, the objectives of the present research were to quantify trace elements concentration in raisins and grape pekmez produced from locally grown grapes in Gonabad and to assess non-carcinogenic (HQ and HI) and carcinogenic (total cancer risk, CRt) health risks caused by trace elements exposure via oral intake of these products for children, teenagers, and adults. For this purpose, a totally 30 (15 raisins and 15 grape pekmez) samples were purchased from the vineyard gardeners and examined for ten trace elements including As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn. The HI values signaled that the studied population consuming these products is at risk. The HQ, HI, and CRt values of the elements were in order of children > teenagers > adults. The highest cancer risk contribution was attributed to As and Ni for all the studied age groups in both raisins and grape pekmez samples. However, it is recommended that the concentration of trace elements in the soil and crops of the study area and its related health risks be regularly monitored to avoid significant health risks in the future.

Chemical Profile of Elements in the Stingless Bee Melipona scutellaris (Hymenoptera: Apidae: Meliponini) from Sites with Distinct Anthropogenic Activities

Stingless bees are pollinators in forests and crops that, during foraging, may be exposed to several environmental xenobiotics, including metallic elements. This study evaluated the presence of magnesium (Mg), aluminum (Al), calcium (Ca), manganese (Mn), iron (Fe), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), molybdenum (Mo), cadmium (Cd), barium (Ba), and lead (Pb) over the body surface of the stingless bee Melipona scutellaris visiting areas with different anthropogenic activity levels. The analyses were carried out using scanning electron microscopy with X-ray energy-dispersive spectroscopy (SEM/XEDS) and all tested elements were identified. Lead was the most abundant element in all samples, whereas Mn had the lowest abundance. High amounts of Cu and Zn were detected in the areas with metallurgic industries. The presence of metals on the body surface of this stingless bee varied according to the level of human activities in the studied areas.

A review on control and abatement of soil pollution by heavy metals: Emphasis on artificial intelligence in recovery of contaminated soil

"Save Soil Save Earth" is not just a catchphrase; it is a necessity to protect soil ecosystem from the unwanted and unregulated level of xenobiotic contamination. Numerous challenges such as type, lifespan, nature of pollutants and high cost of treatment has been associated with the treatment or remediation of contaminated soil, whether it be either on-site or off-site. Due to the food chain, the health of non-target soil species as well as human health were impacted by soil contaminants, both organic and inorganic. In this review, the use of microbial omics approaches and artificial intelligence or machine learning has been comprehensively explored with recent advancements in order to identify the sources, characterize, quantify, and mitigate soil pollutants from the environment for increased sustainability. This will generate novel insights into methods for soil remediation that will reduce the time and expense of soil treatment.

Complexities in attributing lead contamination to specific sources in an industrial area of Philadelphia, PA

Globally, lead (Pb) contamination is one of the top ten chemical exposure issues affecting public health. The identification of specific Pb sources provides valuable information to determine assignment of liability for site cleanup, improve sampling plans and develop remedial strategies. This paper examines Pb concentrations and Pb isotopic data from samples collected at and near the site of a Pb paint production facility with a long operating history. Although high soil Pb concentrations were found at the site, Pb concentrations in surrounding neighborhoods did not simply decline with distance from the site. We evaluated soil concentrations and isotopic mixing lines to explore potential sources of Pb pollution. Three-isotope plots showed overlap of site samples and the surrounding neighborhood, consistent with pollution from the facility affecting offsite soils. A major challenge in separation of potential sources, however, is that the isotopic signatures of other potential Pb sources fall within the range of the soil data. The long operational site history, soil disturbances, the presence of nearby smelters, and other local and remote sources affect identification of lead sources. This analysis demonstrates that source attribution can be confounded by incomplete site and material sourcing information. An integrated approach that includes in-depth site characterization and an evaluation of historical activities (e.g., Pb ores used over time, amounts of Pb emitted by all area smelters, land use changes, and soil disturbances) is important for determining source attribution. This analysis provides insight into future site investigations where soil lead contamination has resulted from a long industrial history in an urban setting.

Environmental and health impacts assessment of long-term naturally-weathered municipal solid waste incineration ashes deposited in soil-old burden in Bratislava city, Slovakia

Municipal solid waste incineration (MSWI) is an effective method for reducing the volume/mass of waste. However, MSWI ashes contain high concentrations of many substances, including trace metal (loid)s, that could be released into the environment and contaminate soils and groundwater. In this study, attention was focused on the site near the municipal solid waste incinerator where MSWI ashes are deposited on the surface without any control. Here, combined results (chemical and mineralogical analyses, leaching tests, speciation modelling, groundwater chemistry and human health risk assessment) are presented to assess the impact of MSWI ash on the surrounding environment. The mineralogy of ∼forty years old MSWI ash was diverse, and quartz, calcite, mullite, apatite, hematite, goethite, amorphous glasses and several Cu-bearing minerals (e.g. malachite, brochantite) were commonly detected. In general, the total concentrations of metal (loid)s in MSWI ashes were high, following the order: Zn (6731 mg/kg) > Ba (1969 mg/kg) ≈ Mn (1824 mg/kg) > Cu (1697 mg/kg) > Pb (1453 mg/kg) > Cr (247 mg/kg) > Ni (132 mg/kg) > Sb (59.4 mg/kg) > As (22.9 mg/kg) ≈ Cd (20.6 mg/kg). Cadmium, Cr, Cu, Pb, Sb and Zn exceeded the indication or even intervention criteria for industrial soils defined by the Slovak legislation. Batch leaching experiments with diluted citric and oxalic acids that simulate the leaching of chemical elements under rhizosphere conditions documented low dissolved fractions of metals (0.00-2.48%) in MSWI ash samples, showing their high geochemical stability. Non-carcinogenic and carcinogenic risks were below the threshold values of 1.0 and 1 × 10^-6, respectively, with soil ingestion being the most important exposure route for workers. The groundwater chemistry was unaffected by deposited MSWI ashes. This study may be useful in determining the environmental risks of trace metal (loid)s in weathered MSWI ashes that are loosely deposited on the soil surface.

Association between residential proximity to municipal solid waste incinerator sites and birth outcomes in Shanghai: a retrospective cohort study of births during 2014-2018

We tested the hypothesis of whether maternal residential proximity to municipal solid waste incinerator (MSWI) sites could significantly affect birth outcomes. This retrospective birth cohort study conducted at the International Peace Maternity and Infant Hospital, Shanghai, China, included 59,606 mothers with singleton live births during 2014-2018. Multivariate generalized linear models were used to examine associations between residential proximity to MSWI sites and birth outcomes. Small for gestational age (SGA) was significantly more common among children with maternal residential proximity to MSWI sites (odds ratio [OR]=1.20, 95% confidence interval [CI]: 1.07-1.34). Maternal prepregnancy body mass index (BMI) influenced this association. Infants of underweight mothers (prepregnancy BMI <18.5 kg/m2) with MSWI exposure (OR=2.00, 95% CI: 1.58-2.52) had higher risks of SGA than their counterparts. Our findings underscore the need to prevent adverse environmental effects of MSWI on birth outcomes; improved exposure assessment measures are warranted in future studies.

High-yield and nitrogen self-doped hierarchical porous carbon from polyurethane foam for high-performance supercapacitors

Confronted with the environmental pollution and energy crisis issues, upcycling of waste plastics for energy-storage applications has attracted broad interest. Polyurethane (PUR) is a potential candidate for the preparation of N-doped carbon materials. However, its low carbon yield limits the utilization of PUR waste. In this study, PUR foam was converted into N-doped hierarchical porous carbon (NHPC) through an autogenic atmosphere pyrolysis (AAP)-KOH activation approach. An ultra-high carbon yield of 55.0% was achieved through AAP, which is more than 17 times the carbon yield of conventional pyrolysis of PUR. AAP converted 83.2% of C and 61.0% of N in PUR into derived carbon material. The high conversion rate and self-doping effect can increase the environmental and economic benefits of this approach. KOH activation significantly increased the specific surface area of carbon materials to 2057 m² g^-1 and incorporated hierarchical porous structure and O-containing functional groups to the carbon materials. The obtained NHPCs were applied to improve the performance of supercapacitors. The electrochemical measurement revealed that NHPCs exhibited a high specific capacitance of 342 F g^-1 (133 F cm^-3) at 0.5 A g^-1, low resistance, and outstanding cycling stability. The energy density and power density of the supercapacitor were improved to 11.3 W h kg^-1 and 250 W kg^-1, respectively. This research developed a possible solution to plastic pollution and energy shortage.

Pilot Study on Removal Characteristics of Multiple Pollutants by the Dual Baghouse Filter System

A 1000 Nm3/h capacity pilot scale dual baghouse filter system was tested on flue gas and fly ash from a municipal solid waste incinerator, and the removal efficiency of dioxins, heavy metals and HCl was studied. Activated carbon was injected at the inlet of the first baghouse filter to remove the gas phase dioxins and heavy metals, and baking soda was injected at the inlet of the second baghouse filter to remove HCl. Concentrations of dioxins at the outlet of the first and second baghouse were 0.034 and 0.011 ng TEQ/Nm3, respectively, which were both far below the national emission standard. The particulate matter concentration was 0.85 mg/m3, and the heavy metals leaching concentration of the fly ash from the second baghouse filter was lower than the hazardous waste identification standard. HCl concentration was almost zero at the outlet of the second baghouse filter when the optimal equivalence ratio of baking soda to HCl was 1.6. In addition, the estimated fly ash yield was 2.35% of the incinerated solid waste for the dual baghouse filter system, which was significantly lower than 3.5% as the traditional semidry scrubber + single baghouse filter.

Characteristics, correlations and health risks of PCDD/Fs and heavy metals in surface soil near municipal solid waste incineration plants in Southwest China

As primary anthropogenic emission source of toxic pollutants such as heavy metals and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), municipal solid waste (MSW) incineration has caused worldwide concern. However, a comprehensive analysis of the pollution characteristics and health risks of PCDD/Fs and heavy metals in soils around MSW incineration plants is lacking. In this study, 17 PCDD/Fs and 11 heavy metals in soil samples collected near MSW incineration plants in Sichuan province were investigated to evaluate their pollution characteristics and potential health risk. Sichuan was selected as the study area because the MSW incineration amount in this province ranks first among all inland provinces in China. The PCDD/Fs concentrations ranged from 0.30 to 7.50 ng I-TEQ/kg, which were significantly below risk screening and intervention thresholds. Regarding heavy metals, principal component analysis suggested that Hg, Pb and Zn were the primary metals emitted from the MSW incineration plants. Cluster analysis of PCDD/Fs and heavy metals showed that of PCDD/Fs homologs and heavy metals (e.g., Hg, Pb, Zn and Cd) were clustered into one group, indicating the coexistence and coaccumulation of heavy metals (especially Hg, Pb, Zn, and Cd) and PCDD/Fs in soil. These heavy metals are thus candidate tracers for PCDD/Fs in soil near MSW incineration plants. A health risk analysis found that the carcinogenic and non-carcinogenic risks of PCDD/Fs and heavy metals (except for Ni) in the soil samples were all within acceptable levels. This study provides new insights into correlations and health risks of PCDD/Fs and heavy metals in surface soil near MSW incineration plants. The findings have implications for future studies of environmental and human health risk analysis related to waste incineration.

A four-way model (FEST) for source apportionment: Development, verification, and application

In studying the spatial, temporal, and particle size variations heavy metal sources, a source apportionment model for a four-way array of data is required. In this study, referencing two-way and three-way models, a four-way (particle fractions, elements, sites, and time) source apportionment model (FEST) was developed. Errors in the three-way models solving four-way problems verified the necessity of developing the FEST model. The results showed that the FEST model had a higher accuracy than the existing models, which was probably because of more constraints and input data in the FEST model. Based on the sampled data in Beijing, sources were apportioned for the four-way array of data using the FEST model, and the spatial, temporal, and particle size variations of sources were evaluated. The main sources of heavy metals were similar to those in our prior studies, whereas the contributions of sources to specific heavy metals differed. Traffic exhaust and fuel combustion contributed more to fine particles than coarse particles, indicating that the two should be controlled preferentially among all sources. The management of traffic exhaust should be focused on the central and northern areas in each season, and the control of fuel combustion should be strengthened in the southern area in winter.

Legacy of anthropogenic lead in urban soils: Co-occurrence with metal(loids) and fallout radionuclides, isotopic fingerprinting, and in vitro bioaccessibility

Anthropogenic lead (Pb) in soils poses risks to human health, particularly to the neuropsychological development of exposed children. Delineating the sources and potential bioavailability of soil Pb, as well as its relationship with other contaminants is critical in mitigating potential human exposure. Here, we present an integrative geochemical analysis of total elemental concentrations, radionuclides of ¹³⁷Cs and ²¹⁰Pb, Pb isotopic compositions, and in vitro bioaccessibility of Pb in surface soils sampled from different locations near Durham, North Carolina. Elevated Pb (>400 mg/kg) was commonly observed in soils from urban areas (i.e., near residential house foundation and along urban streets), which co-occurred with other potentially toxic metal(loids) such as Zn, Cd, and Sb. In contrast, soils from city parks and suburban areas had systematically lower concentrations of metal(loids) that were comparable to geological background. The activities of ¹³⁷Cs and excess ²¹⁰Pb, coupled with their correlations with Pb and co-occurring metal(loids) were used to indicate the persistence and remobilization of historical atmospherically deposited contaminants. Coupled with total Pb concentrations, the soil Pb isotopic compositions further indicated that house foundation soils had significant input of legacy lead-based paint (mean = 1.1895 and 2.0618 for ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁶Pb, respectively), whereas urban streetside soils exhibited a clear mixed origin, dominantly of legacy leaded gasoline (1.2034 and 2.0416) and atmospheric deposition (1.2004-1.2055 and 2.0484-2.0525). The in vitro bioaccessibility of Pb in contaminated urban soils furthermore revealed that more than half of Pb in the contaminated soils was potentially bioavailable, whose Pb isotope ratios were identical to that of bulk soils, demonstrating the utility of using Pb isotopes for tracking human exposure to anthropogenic Pb in soils and house dust. Overall, this study demonstrated a holistic assessment for comprehensively understanding anthropogenic Pb in urban soils, including its co-occurrence with other toxic contaminants, dominant sources, and potential bioavailability upon human exposure.

Heavy metal pollution in the soil around municipal solid waste incinerators and its health risks in China

OBJECTIVE

In China, municipal solid waste (MSW) incineration (MSWI) has been increasing in recent years. However, little is known about how the operation of incinerators can affect levels of heavy metals (HMs) in nearby soils or about the possible associated health risks. It is necessary to understand the degree of enrichment of HMs and health risks to people living nearby.

METHODS

Previous studies (2002-2021) regarding soil HMs near MSW incinerators were collected, and a cluster and factor analysis was used to evaluate the accumulation trends and distribution characteritics of HMs. The soil contamination degrees and the consequent health risks were then assessed.

RESULTS

Cd (0.24 ± 0.16 mg kg-1) is typically accumulated in the topsoil near incinerators, and this is followed by Hg (0.13 ± 0.09 mg kg-1). Most of the health risk due to the total HMs is derived from dermal contact. Dermal contact with Cd and As contributes to more than 67% of the non-carcinogenic risk, while dermal contact with As contributes to more than 99% of the carcinogenic risk (CR). Furthermore, 81.43% of adult males and 76.85% of adult females suffer from CR levels greater than 10-4 due to dermal exposure to As.

CONCLUSIONS

Soils near incinerators indicated light pollution and moderate potential ecological risk, especially with regard to Cd and Hg contamination. Undeniably, there was no significant difference between the health risks from soil HMs near incinerators and from arable land at the national level. It is suggested to reduce the input quantity of HMs by taking advantage of the nationwide implementation of MSW classification and upgrading air pollution control devices for further HM emission reductions.

Development & application of Conceptual Framework Model (CFM) for environmental risk assessment of contaminated lands

Dumping sites are the most common types of contaminated lands as they pollute the environment. Environmental management of contaminated sites cannot be delivered effectively and efficiently without robust holistic & integrated risk assessment. Previous studies reveal the absence of a risk assessment model that holistically integrates all essential factors progressively and categorically. The study aimed to develop a holistic & integrated Conceptual Framework Model (CFM) for environmental risk assessment and to apply developed CFM on real-world existing Mahmood Booti Open Dumping Site (MBODS). CFM developed in this study had three main tiers i.e., baseline study, hazard identification & exposure assessment, and risk estimation. For the application of CFM, baseline data were collected and assessed. Water, leachate & soil samples were collected within 1000 m across the site and analyzed for physio-chemical parameters and heavy metals to estimate risk. Results of applied CFM depicted that Physico-chemical analysis of leachate, water, and soil revealed significant pollution levels. Heavy metal analysis exhibited that Ni, Pb, Mn, and Cr levels exceeded the allowable limits of the "World Health Organization" in leachate, water, and soil samples. It also revealed the existence of metals at the source (dumping site itself), pathway, and receptor of the dumping site. Eⁱ _r value for Ni, Pb and Cd from the study area manifested a serious probable risk to ecological integrities. Results for PERI from dumpsite demonstrated a serious ecological risk. It can be concluded that although Mahmood Booti dumping site has been at post-closure stage, it is a momentous source of hazardous toxic contaminants to the nearby inhabitants. The work presented in this paper may reproduce repeatedly to create site-specific risk assessment models of other contaminated lands in a cost-effective, consistent and cohesive manner. Application of CFM at Mahmood Booti Dumping site described detailed risk assessment which helps further in risk management.

Source apportionment of heavy metals in sediments of the urban rivers flowing into Haizhou Bay, Eastern China: using multivariate statistical analyses and Pb-Sr isotope fingerprints

Urban river runoff carrying various anthropogenic sources of heavy metals (HMs) is the most important input pathways for HM pollutions in the coastal region, apportioning sources of environmental pollutants is key to controlling coastal HM pollution. In the study, surface sediments were collected from seven urban rivers flowing through Lianyungang City and discharging into Haizhou Bay, Eastern China. The concentrations of HMs of the river sediments were, in mg/kg (mean value ± standard deviation): Mn (550 ± 227) > Zn (67 ± 61) > Cr (33 ± 12) > Ni (21 ± 8.5) > Cu (16 ± 7.6) > Pb (15 ± 5.6) > Cd (0.11 ± 0.06), which were slightly to moderately polluted. As important outlets for municipal and industrial sewages, the Shawang River and Linhong River were the most polluted. Based on the multivariate statistical analysis, HMs were attributed to anthropogenic source (industrial, domestic, and agricultural discharges) and natural source (soil parent materials and atmospheric deposition). Based on isotope source apportionment, Pb was mainly from natural source, exhausts of leaded gasoline vehicles, and coal combustion, with the mean contributions of 39.3%, 23.7%, and 37.0%, respectively, and Sr originated from natural source and anthropogenic source, with mean contributions of 31.8% and 68.2%, respectively. Pb-Sr isotopes illustrated that anthropogenic inputs were the dominant source for HMs in urban river sediments flowing into Haizhou Bay, and the isotope tracing results make up the discriminating deficiency of the multivariate statistical analysis.

Health risks of metal(loid)s in maize (Zea mays L.) in an artisanal zinc smelting zone and source fingerprinting by lead isotope

Metal(loid) contamination caused by industrial activities in agricultural soils has become a universal environmental and food safety concern. This study revealed the contamination, pathway, and source contribution of metal(loid)s such as lead (Pb), zinc (Zn) and cadmium (Cd) in maize and soils in different residential areas impacted by long-term historical artisanal zinc smelting activities from Southwest China. Results revealed that the soils were contaminated heavily by metals like Pb, Zn and Cd, with contents of 40-14,280, 150-47,020 and 1.28-61.7 mg/kg, respectively. Hazard quotients of food uptake for Pb, Cd and Cr in maize grains were extremely high for residents, in particular for the children. To trace the sources of metal health risk, lead isotope fingerprinting and binary mixing modeling were applied. It indicated that the anthropogenic activities contributed over 80% to the Pb contamination in maize grains. The findings highlighted warning levels of health risks to the residents in consuming maize grains in the historical artisanal PbZn smelting area. Therefore, an effective strategy including pollution source control and remediation measures must be taken to improve the soil quality and guarantee food safety around the historical smelting areas likewise.

Co-processing of the MSWI flue gas in a lab-scale coal-fired drop-tube furnace

Coal-fired power plants are characterized by high combustion temperature and well-equipped air pollution control devices. The trace organic pollutants in the municipal solid waste incineration (MSWI) flue gas would be completely destroyed if the MSWI flue gas was injected into the high temperature area of a coal-fired boiler. In this study, the emission characteristics of common gas pollutants, heavy metals, and dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in both flue gas and bottom ash when the MSWI flue gas was injected into a lab-scale coal-fired drop-tube furnace were investigated. After co-processing, the concentrations of NOx, SO2, CO, and all heavy metals in the flue gas emitted from the coal-fired drop-tube furnace did not change a lot. However, the concentration of HCl in the flue gas from drop-tube furnace increased after coupling the MSWI flue gas. Moreover, the I-TEQ values of the PCDD/Fs in the flue gas and bottom ash after coupling the MSWI flue gas were 0.037 ng I-TEQ/Nm3 and 0.63 ng I-TEQ/g, respectively. The main formation pathways of PCDD/Fs in the flue gas of drop-tube furnace were suggested to be de novo synthesis and precursor synthesis. Furthermore, the effects of oxygen content and temperature on the formation of PCDD/Fs were also studied. The reduction efficiencies of the total amount of PCDD/Fs in the flue gas from the co-processing system were more than 60%, and even reached 90%. Therefore, co-processing of the MSWI flue gas in coal-fired power plants might be an environmentally friendly technology.

Contribution of the Incinerator to the Inorganic Composition of the PM10 Collected in Turin

Modern incinerator plants are equipped with an efficient system for the removal of pollutants and, hence, the gas and particle emissions are generally extremely low. However, it is possible that malfunctions, together with specific meteorological conditions, temporarily cause significant emissions. In this study, the evolution of the inorganic composition of PM10 samples collected in the vicinity of the Turin incinerator before and after its commissioning was assessed. The purpose was to identify the PM sources present in the area, and to evaluate if the operation of the incinerator caused an increase of the concentration of some species. Significant differences were registered among the composition of samples collected in 2012 and 2014, as the latter year was characterized by higher concentrations of Al, As, Ba, Ca, K, Na, Ni, Pb, Sr, and Zn. Considering the position of the incinerator and of the monitoring station, it seems that this increment was not directly caused by the plant emissions. The most probable source of these elements is the highway vehicular traffic, which might have increased due to the travelling of trucks carrying wastes to the incinerator. However, a direct contribution deriving from the incinerator emissions cannot be excluded.

The high levels of heavy metal accumulation in cultivated rice from the Tajan river basin: Health and ecological risk assessment

Consumption of food crops contaminated with heavy metals (HMs) is a significant risk factor for human health and safety. We evaluated the health risks of HMs in contaminated food crops irrigated with surface water. Results showed there is a substantial buildup of HMs in rice, collected from the Tajan river basin, Iran. The transfer factor (TF) value for toxic elements Cd (3.6-12.4) and Pb (4.9-23.6) were significantly high and exceeded the permissible limits for crops set by WHO. The principal component analysis was used to analyze the relevance of different metals and identify the primary sources. The results showed that two factors dominated the metals variability (94.10% of total variance) that Cr, Fe, Cd, and Pb were dominated by PC1 whereas another factor charged Zn and Cu. The average total hazard quotient (THQ) values for Pb, Fe, Cr, and Cd were 13.8, 7.7, 5.5, and 1.5, respectively, that suggest a considerable risk to the health of regular rice consumers. The high hazard index (HI) value (29.2) demonstrated that the exposure concentration was very high compared to the effective threshold, and it may have potentially harmful implications for human health. To sum up, these results proved that rice from this basin could be a serious dietary source of Pb and Cd exposure to the consumer population.

Hazardous trace elements in thoracic fraction of airborne particulate matter: Assessment of temporal variations, sources, and health risks in a megacity

The deleterious health effects of thoracic fractions seem to be more related to the chemical composition of the particles than to their mass concentration. The presence of hazardous materials in PM₁₀ (e.g., heavy metals and metalloids) causes risks to human health. In this study, twelve trace elements (Cd, Cr, Pb, Zn, Cu, Ni, Sn, Ba, Co, As, V, and Sb) in 315 samples of ambient PM₁₀ were analyzed. The samples were collected at an urban background site in a Latin American megacity (Bogota, Colombia) for one year. The concentrations and temporal variabilities of these elements were examined. According to the results, Cu (52 ng/m³), Zn (44 ng/m³), Pb (25 ng/m³), and Ba (20 ng/m³) were the traces with the highest concentrations, particularly during the dry season (January to March), which was characterized by barbecue (BBQ) charcoal combustion and forest fires. In addition, the differences between the results of weekdays and weekends were identified. The determined enrichment factor (EF) indicated that Zn, Pb, Sn, Cu, Cd, and Sb mainly originated from anthropogenic sources. Moreover, a speciation analysis of inorganic Sb (EF > 300) was conducted, which revealed that Sb(V) was the main Sb species in the PM₁₀ samples (>80%). Six causes for the hazardous elements were identified based on the positive matrix factorization (PMF) model: fossil fuel combustion and forest fires (60%), road dust (19%), traffic-related emissions (9%), copper smelting (8%), the iron and steel industry (2%), and an unidentified industrial sector (2%). Furthermore, a health risk assessment of the carcinogenic elements was performed. Accordingly, the cancer risk of inhalation exposure to Co, Ni, As, Cd, Sb(III), and Pb was negligible for children and adults at the sampling site. For adults, the adjusted Cr(VI) level was slightly higher than the minimal acceptable risk level during the study period (1.4 × 10^-6).

Biomonitoring of Metals in Children Living in an Urban Area and Close to Waste Incinerators

The impact of waste incinerators is usually examined by measuring environmental pollutants. Biomonitoring has been limited, until now, to few metals and to adults. We explored accumulation of a comprehensive panel of metals in children free-living in an urban area hosting two waste incinerators. Children were divided by georeferentiation in exposed and control groups, and toenail concentrations of 23 metals were thereafter assessed. The percentage of children having toenail metal concentrations above the limit of detection was higher in exposed children than in controls for Al, Ba, Mn, Cu, and V. Exposed children had higher absolute concentrations of Ba, Mn, Cu, and V, as compared with those living in the reference area. The Tobit regression identified living in the exposed area as a significant predictor of Ba, Ni, Cu, Mn, and V concentrations, after adjusting for covariates. The concentrations of Ba, Mn, Ni, and Cu correlated with each other, suggesting a possible common source of emission. Exposure to emissions derived from waste incinerators in an urban setting can lead to body accumulation of specific metals in children. Toenail metal concentration should be considered a noninvasive and adequate biomonitoring tool and an early warning indicator which should integrate the environmental monitoring of pollutants.

Thallium contamination, health risk assessment and source apportionment in common vegetables

As an element with well-known toxicity, excessive thallium (Tl) in farmland soils, may threaten food security and induce extreme risks to human health. Identification of key contamination sources is prerequisite for remediation technologies. This study aims to examine the contamination level, health risks and source apportionment of Tl in common vegetables from typical farmlands distributed over a densely populated residential area in a pyrite mine city, which has been exploiting Tl-bearing pyrite minerals over 50 years. Results showed excessive Tl levels were exhibited in most of the vegetables (0.16-20.33 mg/kg) and alarming health risks may induce from the vegetables via the food chain. Source apportionment of Tl contamination in vegetables was then evaluated by using Pb isotope fingerprinting technique. Both vegetables and soils were characterized with overall low ²⁰⁶Pb/²⁰⁷Pb. This indicated that a significant contribution may be ascribed to the anthropogenic activities involving pyrite deposit exploitation, whose raw material and salgs were featured with lower ²⁰⁶Pb/²⁰⁷Pb. Further calculation by binary mixing model suggested that pyrite mining and smelting activities contributed 54-88% to the thallium contamination in vegetables. The results highlighted that Pb isotope tracing is a suitable technique for source apportionment of Tl contamination in vegetables and prime contamination from pyrite mining/smelting activities urges authorities to initiate proper practices of remediation.