Development of a new temperature-controlled liquid phase microextraction using deep eutectic solvent for extraction and preconcentration of diazinon, metalaxyl, bromopropylate, oxadiazon, and fenazaquin pesticides from fruit juice and vegetable samples followed by gas chromatography-flame ionization detection

Determination of insecticide residues in beverages based on MIL-100(Fe) dispersive solid-phase microextraction in combination with dispersive liquid-liquid microextraction followed by HPLC-MS/MS

A novel dispersive solid-phase microextraction method based on a metal-organic framework (MIL-100(Fe)) combined with a dispersive liquid-liquid microextraction technique was proposed for the extraction and enrichment of four insecticides in beverages. The qualitative and quantitative analysis of these insecticides was conducted using HPLC-MS/MS. To optimize the extraction process, several parameters were investigated, and the main variables were optimized using CCD-based RSM. The developed method displayed a wide linear range of 1.000-1000 ng/L and R2 values >0.993 for all four calibration curves. The method demonstrated high sensitivity, with LODs and LOQs of 0.3-0.6 ng/L and 0.8-1.0 ng/L, respectively. In addition, the greenness of the proposed method was assessed using the Complex GAPI tool, and the results showed that the proposed method exhibits benefits, such as minimal usage of organic solvents and negligible matrix influence, making it a suitable method for the detection of insecticide residues in beverages.

Microextraction techniques with deep eutectic solvents for gas chromatographic analysis: a minireview

Sample pretreatment is one of the key steps in sample analysis. The design and development of new materials promote advancements in sample pretreatment technology. Deep eutectic solvents (DESs) are a novel material that have been developed in recent years. They possess characteristics such as low toxicity, good thermal stability, simple preparation methods, and low cost. DESs have the potential to replace traditional organic extraction solvents. DESs are formed from a hydrogen bond donor (HBD) and acceptor (HBA). Changing the type of HBA and HBD or their ratio leads to variations in the structure and properties of the resulting DESs. Gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) are the primary analytical techniques used in laboratories. This paper analyzes the selection relationship between DESs and analytes, as well as the steps of sample pretreatment, based on the characteristics of GC instruments, and utilizing DES extractants and extraction materials for sample pretreatment. This paper summarizes the progress of DES-based microextraction methods for GC. It introduces the different classifications of liquid and solid-phase microextraction and the application of DESs in them. The theoretical mechanism and extraction/separation mechanism of DESs are analyzed, and potential application of DESs in extraction/separation technology is discussed.

Deep eutectic solvents for the extraction of polyphenols from food plants

Deep Eutectic Solvents (DESs) offer a promising, sustainable alternative for extracting polyphenols from food plants, known for their health benefits. Traditional extraction methods are often costly and involve toxic solvents. This review discusses the basic concepts, preparation techniques, and factors influencing the effective and safe use of DESs in polyphenol extraction. DESs' adaptability allows integration with other green extraction technologies, such as microwave- and ultrasound-assisted extractions, enhancing their efficiency. This adaptability demonstrates the potential of DESs in the sustainable extraction of bioactive compounds. Current research indicates that DESs could play a significant role in the sustainable procurement of these compounds, marking an important advancement in food science research and development. The review underscores DESs as a realistic, eco-friendly alternative in the realm of natural extraction technologies, offering a significant contribution to sustainable practices in food science.

Simultaneous determination of enantiomer residues of metalaxyl and its metabolite metalaxyl acid in animal muscle tissues by chiral liquid chromatography-tandem mass spectrometry

The toxicity of the two enantiomers of metalaxyl is significantly different and, for food safety concerns, stereoselective analysis of its residues is extremely important in animal muscle tissues. Herein, a simple, sensitive and reproducible method for the simultaneous stereoselective analysis of metalaxyl and its metabolite metalaxyl acid in animal-derived foods has been established based on mixed-mode anion exchange solid phase extraction and chiral liquid chromatography-tandem mass spectrometry. Under the optimized separation and sample pretreatment conditions, good linearity (r > 0.99) was obtained for four target analytes in four animal muscle tissues including bovine, chicken, swine and fish. Mean recoveries of all enantiomers in muscle tissue samples were 89.5-110.3 % with relative standard deviations below 12.4 %. The limits of quantification of the analytes were 0.3-1.0 µg/kg. The proposed method provides an effective means to monitor the enantiomer residues in real samples whether using highly active R-metalaxyl or racemic mixture drugs.

Keggin-type polyoxometalate embedded polyvinylidene fluoride for thin film microextraction of organophosphorus pesticides

The present research is the first report on the application of Keggin-type phosphotungstic acid/polyvinylidene fluoride membrane. This compound as a simple, cost-effective and novel sorbent was used for the extraction and pre-concentration of two organophosphorus pesticides in real samples in the thin film solid-phase microextraction (TFME) method. TFME as one of the sub-branches of solid phase microextraction resolves the problems of SPME methods, including their limited absorption capacity. These extraction methods have a high surface-to-volume ratio, which improves their sensitivity compared to other geometries. Under optimal conditions, the limit of detections (LODs), the limit of quantifications (LOQs), and relative standard deviation (RSD) of this method varied in the ranges of 0.29-0.31 μg L-1, 0.96-1.0 μg L-1, and 3.9%-6.2%, respectively. This method showed a linear dynamic range (LDR) of 1.0-500 μg L-1 with a coefficient of determination (r2) above 0.9978. This promising method was used to analyze malathion and diazinon.

Applications of Deep Eutectic Solvents in Sample Preparation and Extraction of Organic Molecules

The use of deep eutectic solvents (DES) is on the rise worldwide because of the astounding properties they offer, such as simplicity of synthesis and utilization, low-cost, and environmental friendliness, which can, without a doubt, replace conventional solvents used in heaps. In this review, the focus will be on the usage of DES in extracting a substantial variety of organic compounds from different sample matrices, which not only exhibit great results but surpass the analytical performance of conventional solvents. Moreover, the properties of the most commonly used DES will be summarized.

Greenness of lab-on-a-chip devices for analytical processes: Advances & future prospects

Lab-on-a-chip devices have now-a-days become an important aspect of analytical/bioanalytical chemistry having wide range of applications including clinical diagnosis, drug screening, cell biology, environmental monitoring, food safety analysis etc. Conventional lab-on-a-chip devices generally employ chemicals that are not environmentally friendly and were commonly fabricated on hard plastic platform which are non-degradable and hence ignore the importance of green analytical chemistry. In today's scenario, it is highly imperative to protect our environment by using less toxic and environmentally friendly chemicals/solvents and biocompatible platforms. Accordingly, the present article comprehensively reviews on the various green aspects of lab-on-a-chip devices for analytical processes which aim at fabricating environmentally friendly and cost-effective downsized devices so that the risk factor at the user's end upon longer exposure as well as to the environment can be reduced. The decisive factors for the accomplishment of green aspects of lab-on-a-chip devices including sample preparation using lab-on-a-chip systems to minimize the amount of sample/solvents to few microliters only, substitution of harmful solvents with green alternatives, minimal waste generation or proper treatment of waste and biodegradable and biocompatible platforms for fabricating lab-on-a-chip devices have been discussed in details. Additionally, the challenges that may hinder their commercialization are also critically discussed.

Borane-catalyzed arylation of aryldiazoacetates with N,N-dialkylanilines

A selective arylation of donor-acceptor diazo compounds with aniline derivatives catalyzed by Lewis acidic boranes is developed. This simple reaction protocol provides an efficient method for the synthesis of diarylacetates under metal-free conditions.

Determination of benzotriazole and benzothiazole derivatives in tea beverages by deep eutectic solvent-based ultrasound-assisted liquid-phase microextraction and ultrahigh-performance liquid chromatography-high resolution mass spectrometry

Benzotriazole (BTRs) and benzothiazole (BTHs) derivatives are a group of high production volume chemicals with emerging health concern, which found in tea beverages raising potential risks for food safety and human health. The present work describes a simple method using a "green" deep eutectic solvent (DES) based-ultrasound-assisted liquid-phase microextraction (UALPME) to rapidly extract BTRs and BTHs from tea beverages, and then applying UHPLC-electrospray ionization (+)-quadrupole time-of-flight mass spectrometry for detection and quantification. To overcome the challenges related to different experimental conditions, a Factorial Multilevel Categoric Design and a Face Centered Central Composite Design were applied to screen and optimize the parameters for the DES-UALPME procedure, respectively. After optimization, the method was validated and shown to possess low limits of quantification (LOQs; 1.5-12 ng mL^-1), high precision (3-13%), and satisfactory accuracy (65-107%). The developed method was then successfully applied for the analysis of some selected BTRs and BTHs in tea beverages.

Counter Current Salting-out Homogenous Liquid-liquid Extraction and Dispersion Liquid-liquid Microextraction Based on the Solidification of Floating Organic Drop Followed by High-performance Liquid Chromatography for the Isolation and Preconcentration of Pesticides from Fruit Samples

BACKGROUND

Pesticides are widely used to control pests and prevent diseases in crops, including cereals, vegetables, and fruits. Due to factors such as the persistence of pesticides, bioaccumulation, and potential toxicity, the pesticide residues monitoring in foodstuffs is very important.

OBJECTIVE

In the current research, we proposed a novel approach to counter current salting-out homogenous liquid-liquid extraction (CCSHLLE) combined with dispersive liquid-liquid microextraction based on the solidification of floating organic drop (DLLME-SFO) in pesticides from aqueous samples for the isolation and preconcentration, which were evaluated prior to analysis as real samples by high-performance liquid chromatography-ultraviolet detection (HPLC-UV).

METHODS

In brief, sodium chloride was applied as a separation reagent, which is filled in a small glass column, through which a combination of an aqueous solution (here we could say as juice of fruit) and passing of acetonitrile. In this process, the droplets rose through the column and a separated layer would be formed on what has remained from aqueous phase. Following that, acetonitrile as the organic phase combined with 50.0 µL of extraction solvent. To further enrich the analytes, the mixture was injected into five milliliters of a 4% sodium chloride solution and placed in a tube for the DLLME-SFO.

RESULTS

Under optimal conditions, the dynamic linear range of 0.5-500 μg/L, extraction recovery of 65-85%, enrichment factors of 108-142, and limit of detection as 0.2-0.4 μg/L were obtained for the organophosphorus pesticides. In addition, the repeatability and reproducibility in the five replicate of the pesticides measurements (100 μg/L) are within the ranges of 3.5-5.1% and 4.5-6.3%, respectively.

Deep Eutectic Solvents Application in Food Analysis

Current trends in Analytical Chemistry are focused on the development of more sustainable and environmentally friendly procedures. However, and despite technological advances at the instrumental level having played a very important role in the greenness of the new methods, there is still work to be done regarding the sample preparation stage. In this sense, the implementation of new materials and solvents has been a great step towards the development of "greener" analytical methodologies. In particular, the application of deep eutectic solvents (DESs) has aroused great interest in recent years in this regard, as a consequence of their excellent physicochemical properties, general low toxicity, and high biodegradability if they are compared with classical organic solvents. Furthermore, the inclusion of DESs based on natural products (natural DESs, NADESs) has led to a notable increase in the popularity of this new generation of solvents in extraction techniques. This review article focuses on providing an overview of the applications and limitations of DESs in solvent-based extraction techniques for food analysis, paying especial attention to their hydrophobic or hydrophilic nature, which is one of the main factors affecting the extraction procedure, becoming even more important when such complex matrices are studied.

Ultrasound-assisted dispersive liquid-phase microextraction by solidifying L-menthol-decanoic acid hydrophobic deep eutectic solvents for detection of five fungicides in fruit juices and tea drinks

An ecofriendly and efficient ultrasound-assisted deep eutectic solvents dispersive liquid-phase microextraction by solidifying the deep eutectic solvents-rich phase was developed to determine azoxystrobin, fludioxonil, epoxiconazole, cyprodinil, and prochloraz in fruit juices and tea drinks by high-performance liquid chromatography. A varieties of environmental hydrophobic deep eutectic solvents serving as extraction agents were prepared using L-menthol and decanoic acid as hydrogen-bond acceptor and hydrogen-bond donor, respectively. The deep eutectic solvents were ultrasonically dispersed in sample solutions, solidified in a freezer and easily harvested. The main variables were optimized by one-factor-at-a-time and response surface test. The new method performs well with relative recovery of 71.75-109.40%, linear range of 2.5-5000 μg/L (r ≥ 0.9968), detection limit of 0.75-8.45 μg/L, quantification limit of 2.5-25 μg/L,_, and inter- and intraday relative standard deviations below 13.53 and 14.84%, respectively. As for the extraction mechanism, deep eutectic solvents were disposed into many fine particles in the solution and captured the analytes based on the changes of particle size and quantity in deep eutectic solvents droplets after extraction. The environmental method can successfully detect fungicide residues in real fruit juices and tea drinks.

Applications of deep eutectic solvents to quantitative analyses of pharmaceuticals and pesticides in various matrices: a brief review

Pharmaceuticals and pesticides are important analytes of interest in clinical, environmental, and food analyses for ensuring public health. Sample pretreatment steps are often prerequisites for the quantitative analysis of these compounds, which are generally present in low concentrations in samples with complex matrices. In compliance with the current trend towards green analytical chemistry, the replacement of conventional toxic organic solvents with ecofriendly and safe solvents has been pursued in developing sample pretreatment methods. Subsequent to several reports in 2017, deep eutectic solvents (DESs) have been increasingly applied as desirable alternative solvents in numerous types of sample pretreatment methods for the analysis of pharmaceuticals and pesticides. The present review summarizes analytical methods involving DESs as extraction solvents and as the reaction media or functional materials for preparing adsorbents to quantify pharmaceuticals and pesticides in various matrices.

Experimental Design of Vortex Assisted Switchable Solvent Homogeneous Liquid-Liquid Microextraction for Simultaneous Determination of Four Pesticides in Wastewater

BACKGROUND

Pesticides are chemicals used mainly to protect plant crops in order to increase their production efficiency and quality.

OBJECTIVE

Switchable-solvent homogeneous liquid-liquid microextraction was optimized using a Box-Behnken experimental design and validated on a gas chromatography mass spectrometry system for the determination of analytes.

METHOD

The significance of independent variables (switchable solvent volume, sodium hydroxide volume, and vortex period) and their interactions were evaluated by analysis of variance at 95% confidence limits (α = 0.05).

RESULTS

The LOD and LOQ ranges of the analytes were found to be 0.42-1.90 µg/L and 1.36-6.33 µg/L, respectively. Percentage recovery results were found to be in the range of 87-113% in spiking experiments.

CONCLUSIONS

A simple, efficient, and accurate analytical method was developed for the simultaneous determination of the selected pesticides. Highlights: Matrix matching was used to enhance quantification accuracy for real samples.

HIGHLIGHTS

Matrix matching was used to enhance quantification accuracy for real samples.

Deep eutectic solvent-based dispersive liquid-liquid micro-extraction of pesticides in food samples

Deep eutectic solvents are versatile, green and new generation solvents that can be used during dispersive liquid-liquid micro-extraction techniques for pesticides. They have tunable physico-chemical properties that can be easily changed by varying the ratios of hydrogen bond donors and hydrogen bond acceptors in their structures. Deep eutectic solvents are non-flammable, chemically and thermally stable solvents with low vapour pressure. Thus, they have characteristics that are similar to those of ionic liquids. However, they have simpler synthetic procedures, less expensive and are more biodegradable than ionic liquids. One of the limitations of deep eutectic solvents is their toxicity to the environment but they are less toxic than ionic liquids. This paper gives a focused and comprehensive recent review on the applications of deep eutectic solvents during dispersive liquid-liquid micro-extraction of pesticides in food samples for the period starting from 2016 to 2020. Emphasis was placed on the modifications done to the deep eutectic solvent-based dispersive liquid-liquid micro-extraction techniques in order to enhance their greenness during pesticide pre-concentration in food samples. In addition, hyphenated dispersive liquid-liquid micro-extraction techniques were also reviewed and lastly, the paper outlined the challenges associated with the use of DESs during the DLLME techniques.

Recent Application of Deep Eutectic Solvents as Green Solvent in Dispersive Liquid-Liquid Microextraction of Trace Level Chemical Contaminants in Food and Water

As growing concerns on green, cost-effective, and time-saving chemistry analysis methods, deep eutectic solvents (DESs) are considered to be promising green alternatives to conventional solvents in dispersive liquid-liquid microextraction (DLLME) of trace level chemical contaminants in food and water, due to their biodegradability, low cost, and simple preparation. In the past few years, numerous innovative researches have focused on preconcentration of trace level chemical contaminants using DESs as extractant. In this context, this review aims to summarize the updated state-of-the-art effort dedicated to preconcentration of trace level chemical contaminants in food and water sample using DESs as extractants in DLLME. Furthermore, the major impact factors affecting the preconcentration efficiency and process mechanisms are thoroughly analyzed and discussed. Finally, prospects and challenges in application of DESs as solvents in DLLME to enrich trace level chemical contaminants are extensively elucidated and critically reviewed.

Trace analysis of organophosphorus pesticide residues in fruit juices and vegetables by an electrochemically fabricated solid-phase microextraction fiber coated with a layer-by-layer graphenized graphite/graphene oxide/polyaniline nanocomposite

Herein, a solid-phase microextraction pencil lead fiber coated with a layer-by-layer graphenized graphite/graphene oxide/polyaniline nanocomposite (GG/GO/PANI) was fabricated by an in situ electrochemical technique for the trace analysis of organophosphorus pesticide residues in packed grape and apple juice and also fresh tomato samples. The effects of various parameters, including the type of desorption solvent, adsorption time, desorption time, pH, salt addition, and stirring rate, on the extraction efficiency of the studied pesticides were investigated and accordingly, these parameters were optimized. The proposed fiber demonstrated desirable linear ranges (0.01-300 μg L-1) with good correlation coefficients (R2 ≥ 0.996) as well as low limits of detection (0.003-0.03 μg L-1) for the studied pesticides. The relative standard deviations (n = 5) for the extraction of 50 μg L-1 of each analyte were less than 7 and 11.5% for inter and intra-day precisions, respectively. This fast, facile, and repeatable electrochemical fabrication method produced a porous and homogeneous coating. The proposed fiber demonstrated good extraction efficiency, high stability, and long life-time despite being low cost. The successful application of the proposed fiber for the trace determination of pesticides in complex food matrices was proven by the satisfactory relative recoveries of 80.7-116.5%.

Modified QuEChERS Based on Mixed Adsorbent Cleanup of Mycotoxins in Corn

In order to analyze the mycotoxins in corn, the modified QuEChERS high-performance liquid chromatography was applied to extract, clean up, and detect mycotoxins in a nonpolar system. The impurities such as fat and protein were removed from the corn sample, and the impurities in the sample solution have almost no effect on extraction efficiency. The proposed method leads to a greater choice of mycotoxin-extraction solvents in high-fat-solid samples. An appropriate extraction solvent was selected, the pretreatment conditions were optimized, and the extraction and cleanup of mycotoxins in high-fat solids were enhanced. By changing the experiment parameters, this method can be further used for the extraction and analysis of mycotoxins in complex samples (nonfat, low-fat, or high-fat). This method achieves good linearity in the range of 2.5–1000 μg/kg with the correlation coefficients for all analytes in the range of 0.9975 to 0.9989. The acceptable standard deviations for intraday and interday precision were 1.8–4.3% and 3.2–5.2%, respectively, with recoveries from 89.7 to 105.9%.

In-process prepared deep eutectic solvent based homogeneous liquid-liquid microextraction for the determination of irgaphos 168 and irganox 1010 in polypropylene packed drinks

In situ synthesis of a deep eutectic solvent and homogeneous liquid-liquid microextraction performed in a narrow bore tube was developed for efficient extraction of irgaphos 168 and irganox 1010 in doogh and water samples packed in polypropylene packages. First, pH of the aqueous sample solutions containing the analytes is adjusted at 9. Then a hydrogen bond acceptor (choline chloride) and a hydrogen bond donor (oleic acid) are dissolved in the solution and vortexed to obtain a homogeneous solution. The solution is filled into a narrow bore tube, in which its bottom was clogged by a septum. Then hydrochloric acid solution is injected into the solution by a syringe. The tube is placed in an ultrasonic bath. During this step, the droplets of choline chloride:oleic acid deep eutectic solvent are produced. The method indicated high enrichment factor (435 for irgaphos 168 and 488 for irganox 1010), low limits of detection (0.03 and 0.09 ng/mL for irgaphos 168 and irganox 1010, respectively) and quantification (0.13 and 0.29 ng/mL for irgaphos 168 and irganox 1010), good recovery (74 and 83% for irgaphos 168 and irganox 1010, respectively), and satisfactory repeatabilities (relative standard deviations ≤12%) can be obtained using the developed method.

Green Approaches to Sample Preparation Based on Extraction Techniques

Preparing a sample for analysis is a crucial step of many analytical procedures. The goal of sample preparation is to provide a representative, homogenous sample that is free of interferences and compatible with the intended analytical method. Green approaches to sample preparation require that the consumption of hazardous organic solvents and energy be minimized or even eliminated in the analytical process. While no sample preparation is clearly the most environmentally friendly approach, complete elimination of this step is not always practical. In such cases, the extraction techniques which use low amounts of solvents or no solvents are considered ideal alternatives. This paper presents an overview of green extraction procedures and sample preparation methodologies, briefly introduces their theoretical principles, and describes the recent developments in food, pharmaceutical, environmental and bioanalytical chemistry applications.

Extraction for profiling free and bound phenolic compounds in tea seed oil by deep eutectic solvents

Bound phenolic compounds have rarely been reported in vegetable oils and this may be due to little research about the extraction. Deep eutectic solvents (DESs), recently applied in the extraction of phenolic compounds as alternatives to organic solvents, were adopted in the extraction of free and bound phenolic compounds from tea seed oil in this work. First, the phenolic compounds were analyzed by ultra-high-performance liquid chromatography with quadrupole-time-of-flight and triple-quadrupole tandem mass spectrometry (UHPLC-Q-TOF-MS/MS) for characterization and UHPLC-QqQ-MS/MS for quantification and 25 phenolic compounds were found to exist in both free and bound forms. Then, DESs were screened for extraction of free and bound phenolic compounds from tea seed oil as the pretreatment for analysis and the results showed that hydrogen bond donors (HBDs) and temperature significantly affected the extraction efficiency of DESs. Finally, free phenolic compounds (83.91 µg/g) and bound phenolic compounds (25.71 µg/g), extracted by the DES with glycerol as HBD at 50 °C, were 51.0% and 93.2% higher than those extracted by methanol/water (60%, v/v), respectively. This work not only advanced the basic data of phenolic compounds in tea seed oil but also explored an efficient extraction method for scientific analysis of free and bound phenolic compounds.

Preparation of a new three-component deep eutectic solvent and its use as an extraction solvent in dispersive liquid-liquid microextraction of pesticides in green tea and herbal distillates

BACKGROUND

A new solvent, deep eutectic solvent, in which there is growing interest, has been prepared and used as an extraction solvent in the dispersive liquid-liquid method of microextraction. To prepare the solvent, dichloroacetic acid, l-menthol, and n-butanol are mixed at a molar ratio of 4:1:1 and the deep eutectic solvent is formed after heating. Then a dispersive liquid-liquid microextraction method using the prepared solvent is used for the extraction and preconcentration of some pesticides from an aqueous sample. To carry out the procedure, the deep eutectic solvent is mixed with methanol and rapidly injected by a syringe into the aqueous sample containing the analytes. After centrifuging, an aliquot of the sedimented phase is injected into the gas chromatograph. The influence of several variables on the extraction efficiency was investigated and optimized.

RESULTS

Extraction recoveries and enrichment factors were obtained in the ranges of 53-86% and 1760-2853, respectively. The intra- (n = 6) and inter-day (n = 5) precision of the method was satisfactory, with relative standard deviations ≤ 7% obtained at two concentrations of 10 and 50 μg L^-1 of each analyte. Moreover, detection and quantification limits for the target analytes were obtained in the ranges of 0.11-0.23 and 0.38-0.74 μg L^-1 , respectively.

CONCLUSION

Different samples, including green tea, rose water, lemon balm, mint, and pussy willow distillates were analyzed successfully using the method that was developed, and chlorpyrifos was found in rose water at a concentration of 17 ± 1 μg L^-1 (n = 3). © 2019 Society of Chemical Industry.

Determination of fenazaquin in water and tomato matrices by GC-MS after a combined QuEChERS and switchable solvent liquid phase microextraction

This study presents the use of Quick Easy Cheap Efficient Rugged and Safe (QuEChERS) as an effective sample cleaning procedure and switchable solvent liquid phase microextraction (SS-LPME) as a preconcentration tool for the determination of fenazaquin by gas chromatography mass spectrometry (GC-MS) at ultratrace levels. After a thorough optimization process, 0.50 mL of switchable solvent, 1.5 mL of 1.0 M sodium hydroxide, and 15 s of vortexing were determined as optimum conditions of the SS-LPME method. The limit of detection (LOD) and limit of quantitation (LOQ) determined using the optimum method (SS-LPME/GC-MS) were 0.05 and 0.18 ng/mL, respectively. Compared with direct GC-MS determination of fenazaquin, the optimum method yielded about 800-fold enhancement in detection power of GC-MS. The method was applied to lake, irrigation canal, well, and wastewater samples. In order to test the method's applicability on fresh tomato samples, a QuEChERS method was used before applying the SS-LPME method. Matrix-matched calibration standards were used to enhance the accuracy of fenazaquin quantification in spiked tomato samples to obtain recovery results close to 100%.