Development of a chewing simulator for food breakdown and the analysis of in vitro flavor compound release in a mouth environment

Creating similar food boluses as that in vivo using a novel in vitro bio-inspired oral mastication simulator (iBOMS-Ⅲ): The cases with cooked rice and roasted peanuts

Food bolus is the major outcome of oral processing of foods. Its structure and properties are crucial for safe swallowing and subsequent gastric digestion. However, collecting the ready-to-swallow bolus for further analysis in either normal or deficient human subjects is difficult, regulatorily or practically. Here, a novel in vitro bio-inspired oral mastication simulator (iBOMS-Ⅲ) was developed to be capable of replicating food boluses comparable to those in vivo. Cooked rice and roasted peanuts were used as the model foods (soft and hard) respectively. Particle size distribution, moisture content and rheology of the food boluses produced in the iBOMS-Ⅲ were assessed. A conventional food blender was also employed as a non-consequential comparation. Eighteen healthy young volunteers of the ages from 20-30 years (10 male and 8 female) were invited to provide the in vivo data. For cooked rice boluses produced by the iBOMS-Ⅲ with 10, 12, 14, and 20 chewing number of cycles, the moisture content exhibited minimal variation (68.3-68.8 wt%), aligning closely with values obtained from the average value of the human subjects (67.5 wt%). Similarly, the boluses from roasted peanut displayed similar moisture contents across masticatory number of cycles (36, 40, and 44 number of cycles), averaging at 35.3 %, mirroring the average in vivo results (33.8 wt%). Furthermore, the shear viscosity of both cooked rice and roasted peanut boluses exhibited minimal variations with iBOMS-Ⅲ chewing number of cycles. The particle size distributions of the boluses produced with 14 and 44 chewing number of cycles matched well with the in vivo data for cooked rice and roasted peanuts, with median particle size (d50) being 1.07 and 0.78 mm, respectively. The physical properties of the food boluses collected from the food blender, with varying grinding times, differed significantly. This study demonstrates the value of the iBOMS-Ⅲ in achieving realistic boluses with two very different food textures.

Edible oleogels for oral delivery of berberine in dairy food: In-vitro digestion study

Oleogel is a viscoelastic, spreadable and semi-solid structure, which is used as a fat substitute and a controller the release of bioactive compounds. The aim of this study was to develop low fat dairy dessert enriched with berberine with applying oleogel system as delivery system and fat replacer. The oleogel prepared with an emulsion-templated methods based on soluble interaction of whey protein concentrate (WPC), WPC-basil seed gum (BSG), and WPC-xanthan gum (XG). In the first step, berberine release kinetic in in-vitro gastrointestinal environment was studied. The results showed that the mouth environment had the highest release rate of berberine. Cooperation of hydrocolloids in oleogel increase stability of structure in stomach condition in compared with WPC oleogel. The suitable model to fit the oleogels contain beberine was the Korsmeyer-Papas that was the highest R 2 (.98). According to release results of berberine from oleogel network, the oleogel 0.6BSG:WPC was chosen and applied in formulation of dairy dessert at different levels (0%, 25%, 50%, 75% and 100% of oleogel) instead of cream. The dessert contained uncoated berberine had the unacceptable bitterness in comparison with samples containing coated berberine with oleogel. The overall acceptance decreased with increment of oleogel due to increasing of bitter taste. Appling berberine (therapeutic compound) and oleogel (fat-substitute) to achieve marketable consumer products showed positive effects on trend of the study, especially at low level of substitution.

Comparison of Child and Adult Mastication of a Sticky Processed Cream Cheese and Simulation with a Masticator

An advantage of masticators is the calibration and possible standardization of intra- and inter-individual mastication variability. However, mastication of soft, sticky and melting products, such as processed cream cheeses, is challenging to reproduce with a masticator. The objectives of this work were, for the cheese studied: (1) to compare child and adult mastication and (2) to find in vitro parameters which best reproduce their in vivo chewing. Five parameters influencing mastication (mouth volume, quantity consumed, saliva volume, mastication time and number of tongue-palate compressions) were measured in 30 children (5-12 years old) and 30 adults (18-65 years old) and compared between the two populations. They were then transposed to a masticator (Oniris device patent). The initial cheese, a homogeneous white paste, was surface-colored to investigate its in-mouth destructuring. In vivo boli were collected at three chewing stages (33, 66 and 99% of mastication time) and in vitro boli were obtained by varying the number of tongue-palate compressions and the rotation speed. In vivo and in vitro boli were compared by both image and texture analysis. Child masticatory parameters were proportionally smaller than those of adults. The in vivo child boli were less homogeneous and harder than adult ones. Comparison of in vivo and in vitro bolus color and texture enabled the successful determination of two in vitro settings that closely represented the mastication of the two populations studied.

A Chewing Study of Abuse-Deterrent Tablets Containing Polyethylene Oxide Using a Robotic Simulator

Abuse-deterrent formulations (ADFs) refer to formulation technologies aiming to deter the abuse of prescription drugs by making the dosage forms difficult to manipulate or extract the opioids. Assessments are required to evaluate the performance of the drugs through different routes including injection, ingestion, and insufflation and also when the drugs are manipulated. Chewing is the easiest and most convenient way to manipulate the drugs and deserves investigation. Chewing is one of the most complex bioprocesses, where the ingested materials are subject to periodic tooth crushing, mixed through the tongue, and lubricated and softened by the saliva. Inter- and intra-subject variations in chewing patterns may result in different chewing performances. The purpose of this study is to use a chewing simulator to assess the deterrent properties of tablets made of polyethylene oxide (PEO). The simulator can mimic human molar grinding with variable chewing parameters including molar trajectory, chewing frequency, and saliva flow rate. To investigate the effects of these parameters, the sizes of the chewed tablet particles and the chewing force were measured to evaluate the chewing performance. Thirty-four out of forty tablets were broken into pieces. The results suggested that the simulator can chew the tablets into smaller particles and that the molar trajectory and saliva flow rate had significant effect on reducing the size of the particles by analysis of variance (ANOVA) while the effect of chewing frequency was not clear. Additionally, chewing force can work as an indicator of the chewing performance.

Correlating instrumental measurements and sensory perceptions of foods with different textural properties for people with impaired oral and swallowing capabilities - A review

The rising global life expectancy has underlined the necessity of designing novel and tasty food products, suitable for seniors and people with impaired oral and swallowing functions. For developing these products, texture should be optimised from rheological, colloidal, tribological, and masticatory points of view. The current review provides an overview of different studies based on shear rheological, tribological, and in vitro mastication properties of model or real food systems intended for the elderly and/or people with swallowing dysfunctions, with special emphasis on the relation between the instrumental measurements and sensory perceptions of foods. Several works demonstrated that instrumental data from shear rheological and tribological tests complement the sensory evaluations of foods, providing useful information when designing food commodities for specific populations. Conversely, only few works correlated the instrumental data obtained from artificial mouths and/or simulated masticators with the sensory attributes generated by trained assessors. Broaden knowledge of these topics will help in formulating and adapting foods with enhanced functionalities for people with impaired oral and swallowing capabilities. Shear rheology, soft oral tribology, and simulated mastication tests are crucial in designing safe- and easy-swallowing food products.

The Interaction Relationship of Aroma Components Releasing with Saliva and Chewing Degree during Grilled Eels Consumption

The interaction perception between aroma and oral chewing during food consumption has always been a hot topic in exploring consumers' preferences and purchase desires. A chewing simulation system was set to find out the effect of key saliva components and chewing time on odorants released with grilled eel meat. Odor release did not always enhance with the degree of chewing, or the amount of saliva released. The breaking up of the tissue structure of the fish meat by the teeth encourages the release of odorants and the participation of saliva partially blocks this process. The release of pyrazine, alcohol, and acid compounds in grilled eel meat peaked within 20-60 s after chewing. Sufficient exposure of saliva to grilled eel meat will inhibit aromatic, ketone, ester, hydrocarbon, and sulfur compounds release. 3-methyl-2-butanol contributed to the subtle aroma differences that arise before and after eating grilled eel meat. Naphthalene, 2-acetylthiazole, 2-decenal, 2-undecanone, 5-ethyldihydro-2(3H)-furanone were the main odorants released in large quantities in the early stages of eating grilled eel and affected the top note. Consequently, the results provided the odorants information in aroma perception during grilled eel consumption and benefited the objective evaluation of grilled eel product optimization.

Recent trends in aroma release and perception during food oral processing: A review

The dynamic and complex peculiarities of the oral environment present several challenges for controlling the aroma release during food consumption. They also pose higher requirements for designing food with better sensory quality. This requires a comprehensive understanding of the basic rules of aroma transmission and aroma perception during food oral processing and its behind mechanism. This review summarized the latest developments in aroma release from food to retronasal cavity, aroma release and delivery influencing factors, aroma perception mechanisms. The individual variance is the most important factor affecting aroma release and perception. Therefore, the intelligent chewing simulator is the key to establish a standard analytical method. The key odorants perceived from the retronasal cavity should be given more attention during food oral processing. Identification of the olfactory receptor activated by specific odorants and its binding mechanisms are still the bottleneck. Electrophysiology and image technology are the new noninvasive technologies in elucidating the brain signals among multisensory, which can fill the gap between aroma perception and other senses. Moreover, it is necessary to develop a new approach to integrate the relationship among aroma binding parameters, aroma concentration, aroma attributes and cross-modal reactions to make the aroma prediction model more accurate.

Development and validation of a chewing robot for mimicking human food oral processing and producing food bolus

More and more studies have being done on the deformation process of food and the formation of food bolus during chewing. However, it is hard to observe the food oral processing of subjects and obtain related data directly. A bionic chewing robot based on a six-axis parallel mechanism was proposed in this paper. The robot can not only simulate the movement of the lower jaw but also set a variety of oral processing parameters, such as the number and shape of teeth, oral temperature, saliva volume, chewing cycles, speed and force. Meanwhile, dental wax and peanuts were taken as food samples, and the chewing experiments were carried out by the bionic chewing robot and subjects, respectively. The results showed that the bionic chewing robot could be used to mimic human food oral processing and produce food bolus. Especially when the chewing cycles met the requirement of swallowing, the median particle size of the peanut bolus and the mixing effect index of the dental wax bolus in the two different experiments were highly consistent. In addition, the robot was proved to have the same food texture detection function as the texture analyzer.

Retronasal Aroma of Beef Pate Analyzed by a Chewing Simulator

In retronasal aroma, the targeted aroma compounds are released from food during chewing. The changes in the food structures during chewing strongly influence the release of the compounds, therefore affecting the perception of food. Here, the relationship between retronasal aroma and food deliciousness based on the physicochemical properties of aroma compounds was examined. We considered the consumption of solid foods and the effect of oral parameters in elderly people. Beef pate was used as a model food sample to study the effect of the release of aroma compounds under controlled in vitro mastication and salivation conditions using a chewing simulator. We identified the effects of coexisting ingredients such as beef fat on the time course behavior of the release of aroma compounds. In particular, the release of the middle types of aromas was significantly faster with stronger chewing force, and higher with a high fat content of the sample. In addition, a larger release intensity was observed when soy proteins were partially substituted for beef proteins. Using an appropriate model saliva, a change in the salting-out effect from the saliva composition was found to be a factor, which could explain the lowering of aroma sensation in an elderly person.

A Review of In Vitro Methods for Measuring the Glycemic Index of Single Foods: Understanding the Interaction of Mass Transfer and Reaction Engineering by Dimensional Analysis

The Glycemic Index (GI) has been described by an official method ISO (International Organization for Standardization) 26642:2010 for labeling purposes. The development of in vitro methods for GI measurement has faced significant challenges. Mass transfer and reaction engineering theory may assist in providing a quantitative understanding of in vitro starch digestion and glycemic response from an engineering point of view. We suggest that in vitro GI measurements should consider the mouth and the stomach in terms of fluid mechanics, mass transfer, length scale changes, and food-solvent reactions, and might consider a significant role for the intestine as an absorption system for the glucose that is generated before the intestine. Applying mass transfer and reaction engineering theory may be useful to understand quantitative studies of in vitro GI measurements. The relative importance of reactions and mass-transfer has been estimated from literature measurements through estimating the Damköhler numbers (Da), and the values estimated of this dimensionless group (0.04–2.9) suggest that both mass transfer and chemical reaction are important aspects to consider.

Food Oral Processing-An Industry Perspective

We illustrate how scientific understanding of Food Oral Processing enables food product development with specific benefits for several target populations. in vivo, in vitro, and in silico approaches are discussed in the context of their ability to quantify oral processing from the molecular to the macroscopic scale. Based on this understanding, food structures with enhanced performance in terms of hedonic and nutritional properties as well as appropriateness for age and certain medical conditions can be developed. We also discuss current gaps and highlight development opportunities from an industry perspective.

Development of a Chewing Robot With Built-in Humanoid Jaws to Simulate Mastication to Quantify Robotic Agents Release From Chewing Gums Compared to Human Participants

Medicated chewing gum has been recognised as a new advanced drug delivery method, with a promising future. Its potential has not yet been fully exploited because currently there is no gold standard for testing the release of agents from chewing gum in vitro. This study presents a novel humanoid chewing robot capable of closely replicating the human chewing motion in a closed environment, incorporating artificial saliva and allowing measurement of xylitol release from the gum. The release of xylitol from commercially available chewing gum was quantified following both in vitro and in vivo mastication. The chewing robot demonstrated a similar release rate of xylitol as human participants. The greatest release of xylitol occurred during the first 5 minutes of chewing and after 20 minutes of chewing only a low amount of xylitol remained in the gum bolus, irrespective of the chewing method used. Saliva and artificial saliva solutions respectively were collected after 5, 10, 15 and 20 minutes of continuous chewing and the amount of xylitol released from the chewing gum determined. Bioengineering has been implemented as the key engineering strategy to create an artificial oral environment that closely mimics that found in vivo. These results demonstrate the chewing robot with built-in humanoid jaws could provide opportunities for pharmaceutical companies to investigate and refine drug release from gum, with reduced patient exposure and reduced costs using this novel methodology.

Nano- and Micro-Technologies Applied to Food Nutritional Ingredients

New technologies are currently investigated to improve the quality of foods by enhancing their nutritional value, freshness, safety, and shelf-life, as well as by improving their tastes, flavors and textures. Moreover, new technological approaches are being explored, in this field, to address nutritional and metabolism-related diseases (i.e., obesity, diabetes, cardiovascular diseases), to improve targeted nutrition, in particular for specific lifestyles and elderly population, and to maintain the sustainability of food production. A number of new processes and materials, derived from micro- and nano-technology, have been used to provide answers to many of these needs and offer the possibility to control and manipulate properties of foods and their ingredients at the molecular level. The present review focuses on the importance of micro- and nano-technology in the food and nutritional sector and, in particular, provides an overview of the micro- and nano-materials used for the administration of nutritional constituents essential to maintain and improve health, as well as to prevent the development and complications of diseases.

Artificial saliva-induced structural breakdown of rice flour gels under simulated chewing conditions

Rice flour gels with different amylose contents were subjected to instrumental compression cycles under artificial saliva-spraying conditions to simulate oral mastication and their structural breakdowns were evaluated in terms of rheological and tomographic characteristics. Both mechanical disruption of the gel structure by successive compressions and enzymatic degradation by artificial saliva featured in the simulated chewing process. Highly linear correlations (R² > 0.95) were observed in the log plots of peak chewing force and time. The rice flour gels containing higher levels of amylose required high forces to be deformed by compression. Micro-CT analysis demonstrated that the rice flour gels with a weak cohesive texture were fragmented into smaller pieces by chewing, consequently providing channels for artificial saliva to penetrate inside the gel samples. The cohesive nature of foods appeared thus to play an important role in their disruption rate during chewing, probably influencing the masticatory performance with salvia and subsequent swallowing.

Effect of Oral Physiology Parameters on In-Mouth Aroma Compound Release Using Lipoprotein Matrices: An In Vitro Approach

Temporal aroma compound release during eating is a function of the physicochemical properties of the food matrix, aroma compounds, and oral physiology of individuals. However, the influence of each parameter on the release of each aroma component should be clarified. Two flavored lipoprotein matrices varying in composition were chewed in a chewing simulator that reproduced most of the physiological functions of the mouth. Aroma compound releases (butanoic acid, 2-heptanone, ethyl butyrate, 3-octanone, and 2-nonanone) were followed in real time by direct connection of the device to APCI-MS (atmospheric pressure chemical ionization mass spectrometry). Each oral parameter was controlled and decoupled using the in vitro device. The food matrix composition had only a low impact on aroma compound release, but the controlled oral parameters had significantly different influences on the release of aroma compounds according to their physicochemical characteristics. The release of certain compounds seemed more sensitive to bite force, while others seemed more sensitive to the shearing angle. The salivary flow rate primarily influenced the more hydrophobic compounds. Significant interactions were also observed between shear angle, salivary flow rate, and lipoprotein matrix composition, mainly for the release of the more hydrophobic volatile compounds; this needs further investigations to be clarified.

Lipophilic Allergens, Different Modes of Allergen-Lipid Interaction and Their Impact on Asthma and Allergy

Molecular allergology research has provided valuable information on the structure and function of single allergenic molecules. There are several allergens in food and inhalant allergen sources that are able to interact with lipid ligands via different structural features: hydrophobic pockets, hydrophobic cavities, or specialized domains. For only a few of these allergens information on their associated ligands is already available. Several of the allergens are clinically relevant, so that it is highly probable that the individual structural features with which they interact with lipids have a direct effect on their allergenic potential, and thus on allergy development. There is some evidence for a protective effect of lipids delaying the enzymatic digestion of the peanut (Arachis hypogaea) allergen Ara h 8 (hydrophobic pocket), probably allowing this molecule to get to the intestinal immune system intact (sensitization). Oleosins from different food allergen sources are part of lipid storage organelles and potential marker allergens for the severity of the allergic reaction. House dust mite (HDM), is more often associated with allergic asthma than other sources of inhalant allergens. In particular, lipid-associated allergens from Dermatophagoides pteronyssinus which are Der p 2, Der p 5, Der p 7, Der p 13, Der p 14, and Der p 21 have been reported to be associated with severe allergic reactions and respiratory symptoms such as asthma. The exact mechanism of interaction of these allergens with lipids still has to be elucidated. Apart from single allergens glycolipids have been shown to directly induce allergic inflammation. Several-in parts conflicting-data exist on the lipid (and allergen) and toll-like receptor interactions. For only few single allergens mechanistic studies were performed on their interaction with the air-liquid interface of the lungs, in particular with the surfactant components SP-A and SP-D. The increasing knowledge on protein-lipid-interaction for lipophilic and hydrophobic food and inhalant allergens on the basis of their particular structure, of their capacity to be integral part of membranes (like the oleosins), and their ability to interact with membranes, surfactant components, and transport lipids (like the lipid transfer proteins) are essential to eventually clarify allergy and asthma development.

Particle Size Distribution of Food Boluses and Validation of Simulation During Artificial Indenter Crushing

To study the effects of indenter surface shapes on the crushing of foods, a double-tooth indenter (DTI), a single-tooth indenter (STI), a cylinder-type indenter (CTI) and a wave-type indenter (WTI) were developed by simulating the crown of human molar. Crushing experiments and analysis of finite element simulation were done. Crushing effect was determined by the wet sieving and weighing method; numerial simulations were performed for the crush process using the non-linear contact finite element method. The results showed that the DTI yielded the smallest median size among the four indenters, and the granulometric characteristics of food bolus are similar to human boluses, have higher von Mises stress value than others, higher crush efficiency, bigger crush stress, more stress concentration area than others. The crushing efficiencies of STI and CTI are very close. This study can improve the indenter parameters of texture analyzers and optimize the design process of a food chewing robot.

Challenges in computational modelling of food breakdown and flavour release

A dynamic, three dimensional (3D) computational model that predicts the breakdown of food and the release of tastants and aromas could enhance the understanding of how food is perceived during consumption. This model could also shorten the development process of new foods because many virtual foods could be assessed, and discarded if unsuitable, before any physical prototyping is required. The construction and testing of a complete 3D model of mastication presents many challenges including an accurate representation of: the anatomical movements of the oral cavity (including the teeth, tongue, cheeks and palates), the breakdown behaviour of the food, the interactions between comminuted food and saliva as the bolus is formed, the release and transport of taste and aromas and how these physical and chemical processes are perceived by a person. These challenges are discussed in reference to previous experimental and simulation work and using results of new applications of a coupled biomechanical-smoothed particle hydrodynamics (B-SPH) model. The B-SPH model is demonstrated to simulate several complicated aspects of mastication including: (1) the sensitivity of particle size to changes in the movements of the jaw and tongue; (2) large strain behaviour of food due to softening by heating; (3) interactions between solid and liquid food components; (3) the release of tastants into the saliva; and (4) the transport of tastants to the taste buds. These applications show the possibilities of a model to viably simulate mastication, but highlight the many modelling and experimental challenges that remain.

An atmospheric pressure chemical ionization-ion-trap mass spectrometer for the on-line analysis of volatile compounds in foods: a tool for linking aroma release to aroma perception

An atmospheric pressure chemical ionization ion-trap mass spectrometer was set up for the on-line analysis of aroma compounds. This instrument, which has been successfully employed for some years in several in vitro and in vivo flavour release studies, is described for the first time in detail. The ion source was fashioned from polyether ether ketone and operated at ambient pressure and temperature making use of a discharge corona pin facing coaxially the capillary ion entrance of the ion-trap mass spectrometer. Linear dynamic ranges (LDR), limits of detection (LOD) and other analytical characteristics have been re-evaluated. LDRs and LODs have been found fully compatible with the concentrations of aroma compounds commonly found in foods. Thus, detection limits have been found in the low ppt range for common flavouring aroma compounds (for example 5.3 ppt (0.82 ppbV) for ethyl hexanoate and 4.8 ppt (1.0 ppbV) for 2,5-dimethylpyrazine). This makes the instrument applicable for in vitro and in vivo aroma release investigations. The use of dynamic sensory techniques such as the temporal dominance of sensations (TDS) method conducted simultaneously with in vivo aroma release measurements allowed to get some new insights in the link between flavour release and flavour perception.

Utility of models of the gastrointestinal tract for assessment of the digestion and absorption of engineered nanomaterials released from food matrices

Engineered metal/mineral, lipid and biochemical macromolecule nanomaterials (NMs) have potential applications in food. Methodologies for the assessment of NM digestion and bioavailability in the gastrointestinal tract are nascent and require refinement. A working group was tasked by the International Life Sciences Institute NanoRelease Food Additive project to review existing models of the gastrointestinal tract in health and disease, and the utility of these models for the assessment of the uptake of NMs intended for food. Gastrointestinal digestion and absorption could be addressed in a tiered approach using in silico computational models, in vitro non-cellular fluid systems and in vitro cell culture models, after which the necessity of ex vivo organ culture and in vivo animal studies can be considered. Examples of NM quantification in gastrointestinal tract fluids and tissues are emerging; however, few standardized analytical techniques are available. Coupling of these techniques to gastrointestinal models, along with further standardization, will further strengthen methodologies for risk assessment.