Methoxy poly(ethylene glycol)-grafted-chitosan based microcapsules: Synthesis, characterization and properties as a potential hydrophilic wall material for stabilization and controlled release of algal oil

Study the anticancer efficacy of doxorubicin-loaded redox-responsive chitosan-derived nanoparticles in the MDA-MB-231 cell line

This study focuses on the design and evaluation of redox-responsive nanoparticles (NPs) by synthesizing disulfide-containing N-phthaloyl chitosan-SS-methoxy poly(ethylene glycol) (NPC-SS-mPEG) and incorporating the anti-cancer drug doxorubicin into the NPs. The structural features of NPC-SS-mPEG were investigated using FTIR, NMR, XRD, and TGA/DTA analysis. DLS and TEM analysis confirmed the particle size and morphology of the NPs. The stability of the NPs was measured with the presence and absence of glutathione (GSH) in buffers pH 5 and 7.4. Furthermore, the release of DOX from the NPs was studied in GSH (10 mM) containing/absent medium at pH 5 and pH 7.4 which mimics the intracellular environment with redox potential. The results indicated a significantly increased release of DOX in the GSH containing medium pH 5 (82.9 ± 2.1 %) and pH 7.4 (67.37 ± 0.88 %) compared to the GSH free pH 7.4 (29.99 ± 1.01 %) and pH 5 medium (56.56 ± 1.7 %) at 60 h. The cytotoxicity study in the MDA-MB-231 breast cancer cell line by MTT assay indicated higher toxicity of redox-responsive NPs to cancer cells than free DOX. In concurrence with the cytotoxicity assay, in-vitro fluorescence staining assays (AO/EB, Hoechst, ROS generation) also confirmed that NPs loaded with DOX induce higher toxicity to cancer cells than free DOX. Taken together, the overall results confirmed the superiority of the redox response-mediated release of DOX in effectively controlling cancer progression.

Nano Functional Food: Opportunities, Development, and Future Perspectives

A functional food is a kind of food with special physiological effects that can improve health status or reduce illness. However, the active ingredients in functional foods are usually very low due to the instability and easy degradation of some nutrients. Therefore, improving the utilization rate of the effective ingredients in functional food has become the key problem. Nanomaterials have been widely used and studied in many fields due to their small size effect, high specific surface area, high target activity, and other characteristics. Therefore, it is a feasible method to process and modify functional food using nanotechnology. In this review, we summarize the nanoparticle delivery system and the food nanotechnology in the field of functional food. We also summarize and prospect the application, basic principle, and latest development of nano-functional food and put forward corresponding views.

A Review on Polymer and Lipid-Based Nanocarriers and Its Application to Nano-Pharmaceutical and Food-Based Systems

Recently, owing to well-controlled release, enhanced distribution and increased permeability, nanocarriers used for alternative drug and food-delivery strategies have received increasingly attentions. Nanocarriers have attracted a large amount of interest as potential carriers of various bioactive molecules for multiple applications. Drug and food-based delivery via polymeric-based nanocarriers and lipid-based nanocarriers has been widely investigated. Nanocarriers, especially liposomes, are more and more widely used in the area of novel nano-pharmaceutical or food-based design. Herein, we aimed to discuss the recent advancement of different surface-engineered nanocarriers type, along with cutting-edge applications for food and nanomedicine and highlight the alternative of phytochemical as nanocarrier. Additionally, safety concern of nanocarriers was also highlighted.

Liposomal Delivery of Mycophenolic Acid With Quercetin for Improved Breast Cancer Therapy in SD Rats

The present study explores the influence of mycophenolic acid (MPA) in combination therapy with quercetin (QC) (impeding MPA metabolic rate) delivered using the liposomal nanoparticles (LNPs). Mycophenolic acid liposome nanoparticles (MPA-LNPs) and quercetin liposome nanoparticles (QC-LNPs) were individually prepared and comprehensively characterized. The size of prepared MPA-LNPs and QC-LNPs were found to be 183 ± 13 and 157 ± 09.8, respectively. The in vitro studies revealed the higher cellular uptake and cytotoxicity of combined therapy (MPA-LNPs + QC-LNPs) compared to individual ones. Moreover pharmacokinetics studies in female SD-rat shown higher T 1 / 2 value (1.94 fold) of combined therapy compared to MPA. Furthermore, in vivo anticancer activity in combination of MPA-LNPs and QC-LNPs was also significantly higher related to other treatments groups. The combination therapy of liposomes revealed the new therapeutic approach for the treatment of breast cancer.

Effect of alternan versus chitosan on the biological properties of human mesenchymal stem cells

Alternan α-1,3- and α-1,6-linked glucan, promotes proliferation, migration, and differentiation of human MSCs.

Nanoencapsulation of lemon essential oil in Chitosan-Hicap system. Part 1: Study on its physical and structural characteristics

Lemon essential oils (LEOs) as a bioactive compound with health beneficial potential are used as safe additives in foods, medicine and nutritional supplements. However, it is a chemical compound which is sensitive to light, thermal condition and oxidation. To overcome these challenge encapsulation could be an adequate technique to protect them from degradation and evaporation. In this study, nanocapsules based on chitosan (CS) and modified starch (Hicap) with LEOs as an active ingredient was prepared by freeze-drying. The produced nanocapsules were characterized by their structural and physicochemical properties. It was found that nanocapsules produced by using CS: Hi-cap (1.5%:8.5%) clearly showed the highest encapsulation efficiency (85.44%) and Zeta potential value (+44.23mV). In vitro release studies demonstrated a prolonged release of the samples with larger CS ratio. Most nanocapsules sizes ranged from 339.3 to 553.3nm. The obtained nanocapsules showed a rough surface without the spherical shape as represented by Scanning electron microscopy images. Differential scanning calorimetry (DSC) thermogram and Fourier transform infrared (FTIR) spectroscopy techniques confirmed the success of LEOs encapsulation. The desirable physicochemical properties and thermal stability specified that such nanocapsules have promising application in delivery of LEOs in medicine and food industries.

Synthesis and characterization of cystamine conjugated chitosan-SS-mPEG based 5-Fluorouracil loaded polymeric nanoparticles for redox responsive drug release

The principle objective of this study was to develop and characterize redox responsive polymeric nanoparticles (PNPs) as a stimuli responsive drug delivery system. The chitosan-cystamine-methoxy poly(ethylene glycol) (CH-SS-mPEG) copolymer was synthesized by conjugation of cystamine appended chitosan with carboxylic acid-terminated mPEG and characterized by FTIR, ¹H NMR, XRD analysis and colorimetric assay. This copolymer could be formulated as 5-Fluorouracil (5-FU) loaded PNPs and the characteristics of PNPs were evaluated. Moreover, folic acid functionalized PNPs were prepared for folate receptor targeted drug delivery. Drug release studies indicated that the redox sensitive PNPs were stable in physiological condition while quickly releasing 5-FU in the trigger of redox potential due to the cleavage of the disulfide linkages. In contrast, less quantity of drug was released from the reduction insensitive chitosan-g-methoxy poly(ethylene glycol) (CH-g-mPEG) based PNPs under both reduction sensitive and non-reductive conditions. From the cytotoxicity studies, it was evident that 5-FU loaded PNPs had higher toxicity against MCF7 cells when compared to 5-FU free PNPs. Subsequently, cellular uptake studies showed significantly increased internalization of folic acid attached PNPs. In conclusion, the developed PNPs appeared to be of great promise in redox responsive drug release for targeted drug delivery.

Preparation and characterization of polycaprolactone–polyethylene glycol methyl ether and polycaprolactone–chitosan electrospun mats potential for vascular tissue engineering

Recently, natural polymers are frequently comingled with synthetic polymers either by physical or chemical modification to prepare numerous tissue-engineered graft with promising biological function, strength, and stability. The aim of this study was to determine the efficiency for vascular tissue engineering of two distinctly different mats, one that comprised polycaprolactone–polyethylene glycol methyl ether and other that comprised polycaprolactone–chitosan. Nano/microfibrous mats prepared from electro-spinning were characterized for fiber diameter, porosity, wettability, and mechanical strength. Biological efficacy on both biodegradable mats was assessed by rat bone marrow mesenchymal stem cells, and polycaprolactone–polyethylene glycol methyl ether showed feasibility for use as an inner layer by inducing endothelial-specific gene expression and polycaprolactone–chitosan as an outer layer on dual layered without sacrificing tensile strength, small-diameter blood vessels. Therefore, scaffolds fabricated from this research could be potential sources for tissue-engineered vascular graft and could also overcome the well-known drawbacks, such as thrombogenicity and stenosis, in managing vascular disease.

Thermosensitive tribrachia star-shaped s-P(NIPAM-co-DMAM) random copolymer micelle aggregates: Preparation, characterization, and drug release applications

Tribrachia star-shaped random copolymers with tunable thermosensitive phase transition temperature were designed and synthesized via a simple one-pot ammonolysis reaction approach with trimesic acid as cores. The self-assembly micellization behavior of the copolymers in aqueous solution was examined by surface tension, UV-vis transmittance, transmission electron microscope, and dynamic light scattering measurements, etc. The results indicated that the resultant copolymers formed thermosensitive micelle aggregates through hydrophobic interactions among the isopropyl groups of poly(N-isopropylacrylamide) PNIPAM chains and inter-star association at a polymer concentration above critical aggregation concentrations from 4.06 to 6.55 mg L(-1), with a cloud point range from 36.6℃ to 52.1℃, and homogeneously distributed micelle size below 200 nm. The arm length and the compositional ratios of the two comonomers had effect on physicochemical properties of the polymer micelle aggregates. Particularly, the cloud point values were enhanced as the (N,N-dimethylacrylamide) DMAM monomer was introduced and reached to 36.6℃ and 41.0℃-44.7℃ when the mass ratio of NIPAM to DMAM was 90:10 and 80:20, respectively. The thermo-triggered drug release and cytotoxicity were evaluated to confirm the applicability of the random copolymer micelle aggregates as novel drug targeted release carriers.

Advances in self-assembled chitosan nanomaterials for drug delivery

Nanomaterials based on chitosan have emerged as promising carriers of therapeutic agents for drug delivery due to good biocompatibility, biodegradability, and low toxicity. Chitosan originated nanocarriers have been prepared by mini-emulsion, chemical or ionic gelation, coacervation/precipitation, and spray-drying methods. As alternatives to these traditional fabrication methods, self-assembled chitosan nanomaterials show significant advantages and have received growing scientific attention in recent years. Self-assembly is a spontaneous process by which organized structures with particular functions and properties could be obtained without additional complicated processing or modification steps. In this review, we focus on recent progress in the design, fabrication and physicochemical aspects of chitosan-based self-assembled nanomaterials. Their applications in drug delivery of different therapeutic agents are also discussed in details.

Development of multilayer microcapsules by a phase coacervation method based on ionic interactions for textile applications

The present study describes the development of multilayer microcapsules by 11 alternate additions of chitosan (Chi) and sodium dodecyl sulfate (SDS) in a combined emulsification and phase coacervation method based on ionic interactions. After an alkali treatment, microcapsules are applied on polyester (PET) fabric by a padding process to investigate their wash-durability on fabric. Air atmospheric plasma treatment is performed on PET fabric to modify the surface properties of the textiles. Zeta potential, X-ray photoelectron spectroscopy (XPS), wetting measurements, scanning electron microscopy (SEM), and atomic force microscopy (AFM) with surface roughness measurements are realized to characterize and determine wash durability of microcapsule samples onto PET. After alkali treatment, the microcapsules are selected for textile application because they are submicron sized with the desired morphology. The results obtained from various characterization techniques indicate that microcapsules are wash-durable on PET fabric pre activated by air plasma atmospheric as Chi based microcapsules can interact directly with PET by ionic interactions.