Rheological properties and microstructure of tomato puree subject to continuous high pressure homogenization

Effect of storage on the physicochemical, rheological, antioxidant activity, and sensory properties of soy whey-fortified pineapple juice beverages

Incorporating soy whey into pineapple juice can enhance nutritional and nutraceutical potential. The present study was conducted to develop soy whey-fortified pineapple juice beverage and impact of ambient storage conditions on physicochemical, antioxidant, rheological, and sensory properties of functional beverage. Increasing the storage period decreased pH from 4.1 to 3.7 for control and 4.0 to 3.8 for soy whey-treated samples. TSS increased from 8.3 to 10.6 on 0th day for control and soy whey-treated beverage samples while on the 30th day, the TSS ranged from 8.9 to 11.1°B. Up to 30% soy whey incorporation, the DPPH, reducing power, and ABTS of beverages increased from 5.58%-57.01%, 56.35%-56.90%, and 4.84%-47.01%, respectively. The flow index (n) of the beverage formulations ranged between 0.4758 and 0.6521, and the yield stress between 0.018 and 0.025 Pa, hence showing Herschel-Bulkley character. With the increase in concentration and storage period, both G' and G″ values decreased considerably (p < .05). The standard plate and yeast and mold count decreased considerably with an increase in soy whey and increased with an increase in storage. The sensory score of the beverages up to 30% soy whey exhibited best sensory score results compared to control and samples with 30% above soy whey content.

Structural characteristics of wheat bran insoluble dietary fiber with various particle size distributions and their influences on the kinetics of gastrointestinal emptying in mice

Wheat bran is an abundant yet underutilized agricultural byproduct. Herein, the insoluble dietary fiber from wheat bran (WBIDF) was ultra-milled to investigate its impact on physicochemical properties and gastrointestinal emptying. SEM and CLSM showed that the laminar structure of WBIDF was disrupted as the particle size was significantly reduced. In the similar characteristic peaks appearing at 3410, 2925, 1635, 1041, and 895 cm-1 in the FT-IR spectra and at 2940, 1593, 1080, and 526 cm-1 in the Raman spectra, the peak intensity was increased as the particle size decreased. It may be that the hydrogen bonding between cellulose, hemicellulose, or other macromolecules was enhanced. X-ray diffraction showed cellulose type I results for all five samples. Correspondingly, the water-holding, swelling, and oil-holding capacities increased by 75.33 %, 52.62 %, and 75.00 %, respectively, in WBIDF-CW1.8 compared with WBIDF-CWy. Additionally, smaller particle sizes had lower viscosity, thereby enhancing intestinal propulsion and gastric emptying rates. Enhanced contact of the cecal tissue growth factor with the intestinal mucosa delayed ghrelin secretion and stimulated the secretion of motilin, gastrin, and cholecystokinin. In conclusion, the particle sizes of WBIDF were reduced through ultramicro-grinding, leading to altered structure, enhanced hydration and oil-holding capacities, decreased viscosity, and improved gastrointestinal emptying capacity.

Physical Stability of Lotus Seed and Lily Bulb Beverage: The Effects of Homogenisation on Particle Size Distribution, Microstructure, Rheological Behaviour, and Sensory Properties

The lotus seed and lily bulb beverage (LLB) has a problem with solid particle sedimentation. To address this issue, LLB was homogenised twice at different pressures (0~100 MPa) using a homogeniser. This study aims to investigate the changes in the particle size distribution (PSD), microstructure, rheological behaviour, sedimentation index (IS), turbidity, physicochemical properties, and sensory quality of LLBs after homogenisation treatments. The results regarding PSD and microstructure showed that the suspended particles were decomposed at high pressure with increasing homogenisation pressure, forming small particles of cellular material, cell wall fragments, fibre fractions, and polymers. The LLB showed shear-thinning behaviour and weak gelation characteristics (G' > G″) and rheological properties. Among all homogenisation pressures, the 60 MPa sample showed the lowest sedimentation rate and the highest turbidity. When the pressure was increased from 0 to 100 MPa, the total soluble solid (TSS) content showed an upward trend, while the ascorbic acid content (AAC) gradually decreased. The highest sensory evaluation was observed in the 60 MPa sample in terms of overall acceptability.

Characterization of fruit pulp-soy protein isolate (SPI) complexes: Effect of superfine grinding

Superfine grinding (SG), as an innovative technology, was conducted to improve the physicochemical and structural properties of fruit pulps. Nectarine, apple, and honey peach were selected as the materials. With the increase in SG frequency, the soluble solids content, viscosity, D[4, 3], D[3, 2], G' and G″ of fruit pulps were evidently decreased, whereas the turbidity was increased. The smallest D[4, 3] (294.90 µm) and D[3, 2] (159.67 µm) were observed in nectarine pulp under SG at 50 Hz. The highest turbidity (266.33) was shown in honey peach pulp under SG at 50 Hz. The active groups of the fruit pulps with SG were exposed by Fourier transform infrared spectroscopy (FT-IR). Notably, the excessive destruction in structure was confirmed in SG with 50 Hz. With soy protein isolate (SPI) addition, D[4, 3] and D[3, 2] of complexes decreased, whereas G' and G″ increased. The formation of new fruit pulp-SPI complexes was demonstrated by FT-IR and LF-NMR analysis. The dense and uniform structure was found in complexes prepared by SPI and fruit pulp with 30 Hz SG. Especially, apple-SPI complex with 30 Hz SG showed the highest water-holding capacity (WHC) (0.75) and adhesiveness (7973.00 g s). A significant correlation between fruit pulps and the complexes was revealed. Taken together, the impact of SG modification on fruit pulps would enhance WHC, rheology, and textural properties of the fruit pulp-SPI complexes, especially for SG with 30 Hz. PRACTICAL APPLICATION: This research provided a comprehensive exploration of the potential of SG technology to modify fruit pulps, solving the diversity of textural customization problems and offering valuable insights for the development of semisolid food products.

High-Pressure Homogenization for Enhanced Bioactive Recovery from Tomato Processing By-Products and Improved Lycopene Bioaccessibility during In Vitro Digestion

The principles of industrial ecology have emerged as pivotal drivers of eco-innovation, aiming to realize a "zero-waste" society where waste materials are repurposed as valuable resources. In this context, High-Pressure Homogenization (HPH) presents a promising, easily scalable micronization technology, capable of enhancing the extractability and bioaccessibility of bioactive compounds found in tomato processing by-products, which are notably abundant waste streams in the Mediterranean region. This study focuses on optimizing HPH treatment parameters to intensify the recovery of bioactive compounds from tomato pomace. Additionally, it investigates the multifaceted impacts of HPH on various aspects, including color, particle size distribution, microscopic characteristics, surface properties, bioactivity, and lycopene bioaccessibility through in vitro digestion simulations. The results demonstrate that the application of HPH under optimized conditions (80 MPa, 25 °C, 10 passes) induces a remarkable 8-fold reduction in mean particle size, reduced surface tension, improved physical stability, uniform color, increased total phenolic content (+31%), antioxidant activity (+30%), dietary fiber content (+9%), and lycopene bioaccessibility during the intestinal digestion phase compared to untreated samples. These encouraging outcomes support the proposition of integrating HPH technology into an environmentally friendly industrial process for the full valorization of tomato processing residues. By utilizing water as the sole solvent, this approach aims to yield a functional ingredient characterized by greater nutritional and health-promoting values.

Physical Stability of Chestnut Lily Beverages (CLB): Effects of Shear Homogenization on Beverage Rheological Behavior, Particle Size, and Sensory Properties

The processing parameters have a crucial influence on the stability and sensory quality of beverages. The focus of this study is to observe the rheological behavior, particle size distribution, stability, color change, and sensory evaluation of chestnut lily beverages (CLB) at different rotational speeds (0~20,000 rpm) using a high-shear homogeneous disperser. The CLB system exhibited non-Newtonian shear-thinning behavior. As the homogenization speed increased (0~12,000 rpm), the viscosity increased (0.002~0.059 Pa.s). However, when the rotational speed shear continued to increase (12,000~20,000 rpm), the viscosity decreased slightly (0.035~0.027 Pa.s). Under all homogeneous conditions, the turbidity and precipitation fractions were the lowest when the rotational speed was 12,000 rpm: the sedimentation index was lowest at this point (2.87%), and the relative turbidity value of CLB was largest at this point (80.29%). The average beverage particle diameter and ascorbic acid content showed a downward trend at the homogenization speed from 0 to 20,000 rpm, whereas the total soluble solids (TSS) content followed the opposite trend. The results show that these physical properties can be correlated with different rotational speeds of homogenization. This study explained the effect of homogenization speed on CLB properties, which needs to be considered in beverage processing, where high-speed shear homogenization can serve as a promising technique.

Effects of Breaking Methods on the Viscosity, Rheological Properties and Nutritional Value of Tomato Paste

Ultrasound-assisted processing has potential application advantages as an emerging technology for preparing tomato paste. This work explored the influence of ultrasound break at 22 °C (US-Break-22) and 65 °C (US-Break-65) on the viscosity, rheological properties and nutritional values of newly prepared tomato paste, compared with traditional thermal break at 65 °C (Break-65) and 90 °C (Break-90). Results showed that the US-Break-65 paste had the largest apparent viscosity, yield stress, consistency coefficient, solid-like nature, and large amplitude oscillatory shear behavior, followed by the US-Break-22 paste, Break-90 paste, and Break-65 paste. Based on the results of the pectin-related enzymes, particle size, and serum pectin of the pastes, it was revealed that the above-mentioned properties were mainly determined by the particle size and pectin content in their serum. The level of ascorbic acid followed the order of US-Break-22 paste > US-Break-65 paste > Break-65 paste > Break-90 paste. The level of total carotenoids followed the order of US-Break-22 paste ≈ US-Break-65 paste > Break-90 paste ≈ Break-65 paste. The level of total cis-carotenoids followed the order of US-Break-65 paste > US-Break-22 paste > Break-90 paste > Break-65 paste. The level of phenolics and antioxidant activities followed the same order of US-Break-22 paste > US-Break-65 paste > Break-90 paste > Break-65 paste. Overall, the viscosity, rheological properties and nutritional values of the tomato pastes prepared by US-Break-65 and US-Break-22 were significantly higher than those prepared by Break-65 and Break-90. Therefore, ultrasound assisted processing can prepare high quality tomato paste and can be widely implemented in the tomato paste processing industry.

An overview of different homogenizers, their working mechanisms and impact on processing of fruits and vegetables

Fruits and vegetables (F&V) are the second highest recommended foods, rich in antioxidants, vitamins and minerals, vital for building immunity against chronic diseases. F&V processing involves particle size reduction, for which different types of homogenizers, categorized as mechanical homogenizers, pressure homogenizers and ultrasonic homogenizers are used. The review discusses different types of homogenizers, their working mechanism, and application in F&V processing. Among mechanical homogenizers, knife mills are used for primary size reduction, ball mills for the micronization of dried F&V and rotor-stator homogenizers for emulsification. Use of the ultrasonic homogenizer is limited to extraction of bioactive compounds or as a pre-treatment for dehydration of F&V. High-pressure homogenizers are most widely used and reported due to the synergistic effect of homogenization and temperature increase, resulting in longer shelf-life and better physicochemical properties of the product. Additionally, the review also explains the effect of homogenization on the physicochemical, sensory and nutraceutical properties of the product.

Effect of Foliar Fertigation of Chitosan Nanoparticles on Cadmium Accumulation and Toxicity in Solanum lycopersicum

Simple Summary

The experiment conducted on Solanum lycopersicum provided an insight about Cd uptake, and the way a Solanum lycopersicum changes its physiological, biochemical and morphological responses when CTS-NPs are administered against Cd. As an effective important polymer, CTS-NPs enhanced the plant biomass, SPAD index, photosynthetic rate, and protein content in the Solanum lycopersicum plants grown in Cd stress, as a study herein. Addition of CTS-NPs reduced Cd accumulation by increasing the nutrient uptake. Furthermore, CTS-NPs treatment enhances tolerance to Cd stress through hampering ROS production accompanied by H₂O₂ activity, through reducing the peroxidation of lipids by minimizing MDA content, and through improving enzymatic (CAT, POX, SOD), non-enzymatic (GSH and AsA), and osmoprotectants (proline) antioxidant contents that are considered as a first line of defense to protect plants from stress.

Abstract

Cadmium (Cd) stress is increasing at a high pace and is polluting the agricultural land. As a result, it affects animals and the human population via entering into the food chain. The aim of this work is to evaluate the possibility of amelioration of Cd stress through chitosan nanoparticles (CTS-NPs). After 15 days of sowing (DAS), Solanum lycopersicum seedlings were transplanted into maintained pots (20 in number). Cadmium (0.8 mM) was providing in the soil as CdCl₂·2.5H₂O at the time of transplanting; however, CTS-NPs (100 µg/mL) were given through foliar spray at 25 DAS. Data procured from the present experiment suggests that Cd toxicity considerably reduces the plant morphology, chlorophyll fluorescence, in addition to photosynthetic efficiency, antioxidant enzyme activity and protein content. However, foliar application of CTS-NPs was effective in increasing the shoot dry weight (38%), net photosynthetic rate (45%) and SPAD index (40%), while a decrease in malondialdehyde (24%) and hydrogen peroxide (20%) was observed at the 30 DAS stage as compared to control plants. On behalf of the current results, it is demonstrated that foliar treatment of CTS-NPs might be an efficient approach to ameliorate the toxic effects of Cd.

Effects of High-Pressure Homogenization on Pectin Structure and Cloud Stability of Not-From-Concentrate Orange Juice

Not-from-concentrate (NFC) juice is popular with consumers due to its similarity to fresh fruit juice in taste, flavor, and beneficial nutrients. As a commonly used technology in fruit juice production, high-pressure homogenization (HPH) can enhance the commercial value of juice by improving the color, flavor, taste, and nutrient contents. In this study, the effects of HPH on the pectin structural properties and stability of NFC orange juice were investigated. The correlations between HPH-induced changes in the structure of pectin and the stability of orange juice were revealed. Compared with non-homogenized orange juice, HPH increased the galacturonic acid (GalA) content and the linearity of pectin, while decreasing the molecular weight (Mw), pectin branching, and rhamnogalacturonan (RG) contribution, and cracks and pores of different sizes formed on the surface of pectin, implying depolymerization. Meanwhile, with increasing pressure and number homogenization of passes, HPH effectively improved the stability of NFC orange juice. HPH can effectively prevent the stratification of orange juice, thereby promoting consumer acceptance and endowing a higher commercial value. The improvement of the stability of NFC orange juice by HPH was related to the structural properties of pectin. Turbidity was significantly (P < 0.01) positively correlated with GalA and pectin linearity, but was significantly (P < 0.01) negatively correlated with Mw, RG contribution, and pectin branching. Modification of pectin structure can improve the stability of NFC orange juice. In this work, the relationship between the pectin structure and stability of NFC orange juice is elucidated, providing a path toward improving consumer acceptance and enhancing the palatability and nutritional and functional qualities of orange juice. Manufacturers can use this relationship to modify pectin directionally and produce high-quality NFC orange juice beverages.

Characterization and Phylodiversity of Implicated Enteric Bacteria Strains in Retailed Tomato (Lycopersicon esculentum Mill.) Fruits in Southwest Nigeria

BACKGROUND: Tomatoes (Lycopersicon esculentum Mill.) have very huge health-promoting benefits due to high nutritional composition; however, these fruits are potential reservoir of enteric food-borne pathogens causing major public health concerns. AIM: Characterization and phylo-analysis of implicated enteric bacteria strains in retailed Tomato fruits in southwest Nigeria were studied. METHODS: Ready to be retailed fresh tomato fruits were purchased from common food markets in southwest, Nigeria, which lies between latitudes 6° 21′ to 8° 30′ N and longitudes 2° 30′ to 5° 30′ E. Observation of sample storage potentials at different conditions and bio-typing of associated bacterial strains were carried out for consecutive 14 days. Enteric bacteria strains were genotyped with 16S rRNA assay and further profiled for antibiotic susceptibility to common antibiotics. High population rate frequently consume tomatoes. RESULTS: Early spoilage characterized with yellow fluid, fungal growth and visible lesions were observed at 25°C storage compare to few patches of lesion at 4°C after 14 days. Higher bacterial count of 4.0–7.18 Log CFU/g was recorded at ambient storage compare to refrigerated samples with more than 10% occurrence rate of Citrobacter spp., Klebsiella spp. and Enterobacter spp. Identified Citrobacter spp. and Klebsiella spp. showed 100% resistant to beta-lactam antibiotics (ceftazidime, cefuroxime, cefixime, ciprofloxacin, and amoxicillin-clavulanic acid). Two-resistant enteric bacteria strains, Klebsiella aerogenes B18 and Citrobacter freundii B27 obtained from Nigerian tomato clustered with Citrobacter strains in food (China), water strains (India, Poland, Malaysia), milk (Germany), and human fecal (China). CONCLUSION: Implicated multidrug-resistant enteric bacilli in retailed tomatoes can cause severe food-borne diseases which public oriented awareness, strategic farm to market surveillance are needed to be intensified.

Effect of high frequency ultrasound pre-treatment on nutritional and technological properties of tomato paste

This study investigates the separate effect of sonication (US, carried out for 5 and 15 min) and thermal treatment (90 °C for 5 min) on nutritional and technological properties of tomato paste. US treatments did not affect the colour parameters and decreased the level of total acidity. Ascorbic acid content was slightly reduced after 5 min US but halved by pasteurization, while total carotenoids (TCC) and lycopene (LC) decreased in non-pasteurized samples after 15 min US. Neither the TCC nor the LC significantly changed in US-pasteurized samples if compared to controls. Microscopic analyses suggested a possible increased bioaccessibility of lycopene in US treated samples due to an enhancement of free lycopene clusters. Viscosity decreased as a consequence of thermal stress, although sonication contributed as well. The present findings suggest that 5 min sonication before pasteurization can enhance the nutritional characteristics of tomato paste, besides improving its texture.

Continuous High-pressure Cooling-Assisted Homogenization Process for Stabilization of Apple Juice

The effect of high-pressure homogenization (HPH) at 100–200 MPa (with up to 5 passes) on the quality and storage stability of apple juice was investigated. The microbiological quality, polyphenol oxidase (PPO), peroxidase (POD), polygalacturonase (PG) and pectinmethylesterase (PME) activity, particle size distribution (PSD), apparent viscosity, turbidity, concentration of vitamin C, individual polyphenols and their total content (TPC), antioxidant activity, and colour of fresh, HPH-treated apple juice were all evaluated. The highest reduction in microorganisms (1.4 log) and oxidoreductase activity (~20%) was observed at 200 MPa, while hydrolases did not change significantly. HPH led to significant disintegration of the tissue and a decrease in viscosity. Vitamin C decreased by 62%, while TPC increased by 20% after HPH. Significant correlations were observed between antioxidant activity, TPC, and individual polyphenols. Chlorogenic, ferulic, and gallic acid were most stable at 200 MPa. The optimal shelf-life of the juice was estimated as 7 days.

Impact of high-pressure homogenization on the microstructure and rheological properties of citrus fiber

Citrus fiber dispersion with different concentrations (5–25 g/kg) was treated by high-pressure homogenization (90 and 160 MPa) for two cycles. The particle size distribution, hydration properties of powders, morphology and rheological measurements were carried out to study the microstructure and rheological properties changes by high-pressure homogenization (HPH). In conclusion, the HPH can reduce the particle size of fiber, improve the water holding capacity and water binding capacity. Furthermore, fiber shape can be modified from globular cluster to flake-like slices, and tiny pores can be formed on the surface of citrus fiber. The apparent viscosity, storage modulus and loss modulus were increased by HPH whereas the activation energy was reduced. The Hershcel–Bulkley model, Carreau model and Power Law mode were selected to evaluate the rheological properties.

A new type of tomato puree with high content of bioactive compounds from 100% whole fruit

In this work, a new type of tomato puree was obtained from the whole fruit including seeds and skins without any waste. Currently, the food industry aims to develop products that both bring benefits to consumer health and are ecosustainable. Several efforts in fact have been carried out to revalue tomato by-products, such as seeds and skins, for human use. The physicochemical properties of the whole tomato puree immediately after production and after 6 months of storage were investigated and compared to the properties of a traditional tomato puree. Two tomato varieties were used in this study: Villa Literno and Piccadilly. pH, dry weight, water activity, titratable acidity, reducing sugars, soluble solid, lycopene, polyphenol, and volatile organic compound contents were evaluated. Tomato puree obtained from whole fruits mainly showed higher lycopene (90 to 150 mg/kg), flavonoid (39 to 41 mg/kg), and aldehyde (in particular hexanal) contents and a greater stability over time compared to those of the traditional puree. The proposed process allowed to obtain a tomato puree with a higher content of bioactive compounds, producing no waste. PRACTICAL APPLICATION: In this study, we proposed a new type of tomato puree made from the whole fruit. The whole tomato puree is richer in phenolic compounds and volatile organic compounds than the traditional puree that is made by removing skins and seeds. It can be an interesting product for the food industries because it is a source of bioactive compounds and reduces to zero the amount of waste.

Effect of high pressure homogenization on mixed juice stability, rheology, physicochemical properties and microorganism reduction

Cloud instability and loss of fresh-like appearance are important quality defects of cloudy mixed juices determining consumer acceptability. Therefore, the aim of this study was to investigate the feasibility of high pressure homogenization (HPH) for improving cloud stability, flow behavior and physicochemical characteristics as well as reducing spoilage microorganisms in a cloudy mixed juice, consisting of carrot, apple and peaches. HPH treatments included pressure of 25 MPa, 100 MPa, 140 MPa and 180 MPa, pass of 1 and 2 and inlet temperature of 25 °C and 40 °C, respectively. Results indicated that increasing pressure and pass improved cloud stability, while increasing temperature had negative effect. Herschel Bulkey model could be well fitted to viscosity related data. Compared with control (non-homogenized, NH) sample, HPH at 140 MPa and 25 °C for 1 pass resulted in three times higher flow behavior index. Increasing inlet temperature also resulted in enhancing flow behavior. Besides, total soluble solids content was not affected by HPH, even though pH and color showed slight changes. Compared with NH sample, HPH at 140 MPa resulted in 4 log₁₀ and 3 log₁₀ reductions in total plate count and yeasts and molds count respectively. Thus, HPH at 140 MPa could effectively be used for enhancing cloud stability, improving flow behavior and reducing microorganisms in cloudy mixed juices.

The properties and formation mechanism of oat β-glucan mixed gels with different molecular weight composition induced by high-pressure processing

High pressure, an emerging nonthermal technology has been widely applied in food product modifications. The effects of oat β-glucan concentration and pressure on the properties of mixed gels with the different ratios of varying molecular weight (MW) β-gulcan induced by HPP were investigated. The results showed that the lowest β-glucan concentration forming a gel was 15% at 200 MPa, while 8% β-glucan was required to form a gel at 500 MPa. The gel intensity and textural properties increased with elevating β-glucan total concentration and pressure. The characteristic compact and smooth mixed gel formed with 12% β-glucan at a ratio of 50:50 at 400 MPa for 30 min. Under this optimal parameters, the mixed solution showed a relatively lower particle size and turbidity, and the hydrogen bonding and electrostatic interaction played the main role during the gel formation process by high pressure. In addition, the core molecular structure of β-glucan was maintained in the mixed gel formed under the optimal parameters.

The Effect of the Ultra-High-Pressure Homogenization of Protein Encapsulants on the Survivability of Probiotic Cultures after Spray Drying

Interest in probiotic foods and ingredients is increasing as consumers become more aware of their potential health benefits. The production of these products often involves the use of dry culture powders, and the techniques used to produce such powders often suffer from significant losses of viable cells during drying or require the use of expensive drying technologies with limited throughput (e.g., freeze drying). In this study, the authors examined whether culture survivability during spray drying could be increased via the treatment of two common protein encapsulants with ultra-high-pressure homogenization (UHPH). Lactobacillus plantarum NRRL B-1927 (also known as ATCC 10241), a probiotic strain, was suspended in either soy protein isolate (SPI) or whey protein isolate (WPI) which had been either treated with UHPH at 150 Mpa or left untreated as a control. The suspensions were then dried using either concurrent-flow spray drying (CCSD), mixed-flow spray drying (MFSD) or freeze drying (FD) and evaluated for cell survivability, particle size, moisture content and water activity. In all cases, UHPH resulted in equal or greater survivability among spray dried cultures, showed reductions in particle size measures and, except for one marginal case (CCFD SPI), significantly reduced the moisture content of the dried powders. The combination of these findings strongly suggests that UHPH could allow probiotic powder manufacturers to replace freeze drying with spray drying while maintaining or increasing product quality.

Effects of High-Pressure Homogenization on the Structural, Physical, and Rheological Properties of Lily Pulp

The effects of high-pressure homogenization (HPH) on the structural, physical, and rheological properties of lily pulp (15%, w/w) were investigated. Different pressures ranging from 0 MPa to 100 MPa were used. The focus was on evaluating the changes in the particle size distribution (PSD), structure, pulp sedimentation behavior, serum cloudiness (SC), total soluble solids (TSS), color, and rheological behavior of the pulps. PSD analysis showed that the diameter of suspended lily particles significantly decreased with an increasing homogenization pressure. The suspended particles observed through optical microscopy became small after homogenization, highlighting the effect of HPH on disrupting the suspended particles. Compared with the untreated pulp, the SC and sedimentation velocity of the homogenized pulps decreased due to the disruption of the suspended particles. The effects of HPH on the sedimentation index and SC exhibited an asymptotic behavior similar to that of the changes in the particle size of lily pulp. Moreover, HPH processing reduced the viscosity of lily pulp and increased the TSS and lightness of the homogenized pulps. HPH significantly modified the structural, physical, and rheological properties of lily pulp. The pulp homogenized above 60 MPa had good suspension stability. This finding indicates that HPH technology can be used to improve the stability of lily pulp.

Interlaboratory Measurement of Rheological Properties of Tomato Salad Dressing

Rheological properties of food materials are important as they influence food texture, processing properties, and stability. Rotational rheometry has been widely used for measuring rheological properties. However, the measurements obtained using different geometries and rheometers are generally not compared for precision and accuracy, so it is difficult to compare data across different studies. In this study, nine rheometers from seven laboratories were used to measure the viscosity and viscoelastic properties of a commercial salad dressing. The measurements were obtained at three temperatures (8, 25, and 60 °C) using different diameter parallel plates (20, 40, 50, and 60 mm). Generally, the viscosity measurements among rheometers differed significantly ( P < 0.05 ). For larger geometry diameter (40, 50, and 60 mm) and at lower temperatures (8 °C), viscosity measurements at lower shear rate (0.01, 0.1, and 1.0 s^-1 ) were significantly different. Rheometer brand significantly affected storage modulus only at low (0.01%) and high levels (10% and 100%) of strain. Temperature was an influencing factor on viscoelastic behaviors only at high strain (>10%). Storage moduli values obtained by frequency sweeps were not affected by rheometer or plate diameter. Overall, rheometer, geometry, and temperature can influence rheological measurements and care should be taken when comparing data across laboratories or published works. Higher shear rates (≥10 s^-1 ) and moderate strains (0.1% to 10%) generally provide more repeatable data among different laboratories. PRACTICAL APPLICATION: This study provides information on what factors may potentially influence rheological measurements conducted across different laboratories. It is useful for rheometer users who want to compare their experimental data to published data or compare two sets of published data. It is better to compare data collected at shear rates 10 s^-1 and strains between 0.1% and 1.0%.

The spatial-temporal working pattern of cold ultrasound treatment in improving the sensory, nutritional and safe quality of unpasteurized raw tomato juice

In considering the adverse nutritional and flavor consequences of thermal pasteurization on fruit juices, freshly squeezed and unpasteurized fruit juices, commonly called raw juices, are of increasing demand as they are served in bars, restaurants and at home. Apparently, due to lack of controlled processing regime as did in a juice factory, the raw juice often undergoes a rapid phase separation and is at the risk of microbial unsafety. To this end, an attempt of cold ultrasound treatment (CUT, 87.52 W/cm², 10 °C) was implemented to a raw tomato juice up to 30 min. Appreciatively, the physical stability, nutritional value and microbial safety substantially improved. On a CUT time scale, cloud stability and total phenolic content continuously increased; the total plate count was adversely altered; the rheological parameters (viscosity, thixotropy and shear-thinning tendency) and total carotenoids obtained shared a parabolic changing pattern but peaked at 15 min and 10 min, respectively. Finally, the ascorbic acid sharply increased at an earlier stage (5 min), and then remained stable throughout the whole process. Notably, the occurrences of these improvements are of spatial-temporal nature and resulted from different cavitation induced stress fields. At the initial stage, CUT chiefly worked via the mechanical field with the particles in pulp phase, making them smaller and releasing the soluble materials into serum phase. When the particles larger than approximately of 160 μm were completely disintegrated, the CUT entered its second stage and mainly functioned in the serum phase via both mechanical and chemical fields. As a result, the serum pectin and carotenoids were depolymerized and degraded, respectively. The present results are valuable in uncovering the mechanism and kinetics underlying the ultrasound treatment of fruit juices and the present CUT is highly recommended due to its high maneuverability and excellent performance.

Effect of sonication on the quality attributes of juçara, banana and strawberry smoothie

Effect of sonication on the quality parameters of juçara, banana and strawberry smoothie was evaluated using a rotational central composite design with power (73.5-250.0 W) and time (7-36 min) as independent variables. The sonicated smoothie was evaluated regarding anthocyanins, instrumental color and rheological and physicochemical parameters. Within the evaluated processing conditions, 86% of anthocyanins were retained. The pH and acidity of the smoothie wasn't affected by the independent variables. Regarding instrumental color parameters, only luminosity was affected by the operational conditions. The cavitation phenomenon decreased the apparent viscosity of the smoothie. The sonicated smoothie presented non-Newtonian behavior, with characteristics of a pseudoplastic fluid (n < 1) in all treatments and control. Taking into account that the highest anthocyanin retention was observed at 147 W for 2 min, this condition was the most recommended for the processing of the product.

Dispersive Solid-Phase Extraction of Polyphenols from Juice and Smoothie Samples Using Hybrid Mesostructured Silica Followed by Ultra-high-Performance Liquid Chromatography-Ion-Trap Tandem Mass Spectrometry

A wormhole-like mesostructured silica was synthesized and modified with octadecylsilane (C18) groups. The resulting hybrid material (HMS-C18) was characterized and evaluated as sorbent for simultaneous extraction of 20 polyphenols from mixed fruit-vegetable juices and smoothies by dispersive solid-phase extraction (dSPE). The samples were first subjected to solvent extraction followed by dSPE procedure. The extraction step was optimized and combined with a reversed-phase ultra-high-performance liquid chromatography method coupled to ion-trap tandem mass spectrometry (UHPLC-IT-MS/MS), which was also optimized. HMS-C18 showed high potential to extract and purify the target analytes, being more effective than commercial C18 amorphous silica. The proposed method was validated for both samples, obtaining average recoveries from 57% to 99% with relative standard deviations lower than 9%. Its applicability in the analysis of commercial mixed fruit-vegetable juices and smoothies revealed mainly contents of rutin, 4-hydroxybenzoic acid, chlorogenic acid, epicatechin, caffeic acid, and naringin in the samples analyzed.

Effect of Processing on Bioactive Compounds, Physicochemical and Rheological Characteristics of Juçara, Banana and Strawberry Smoothie

This study aimed to evaluate the effect of processing steps on bioactive compounds and physicochemical and rheological characteristics of a juçara, banana and strawberry smoothie. The product was obtained by mixing the pulps of these fruits in previously defined proportions. The mixture was standardized in a pilot disintegrator, homogenized at 60 MPa in continuous mode and pasteurized at 90 °C for 35 s. The homogenization step increased the concentration of cyanidin-3-O-glucoside and cyanidin-3-O-rutinoside, major anthocyanins in the smoothie. However, these anthocyanins, as well as perlagonidin-3-O-glucoside, have been reduced (p<0.05) after the pasteurization step. The pasteurization also affected the instrumental color of the smoothie, expressed by Hue angle (p<0.05). Regarding to the rheological behavior, the smoothie, in all processing steps, presented a non-Newtonian fluid behavior with pseudoplastic characteristics (n<1). After homogenization, the smoothie became more fluid and homogeneous. Thus, despite the negative impact of pasteurization on the smoothie's color, the pasteurized product preserves the bioactive compounds such as flavonoids and phenolic acids that are of great importance to human health. Furthermore, the development of this product contributes to add value to the juçara agro-chain and Atlantic Forest preservation.

Application and possible benefits of high hydrostatic pressure or high-pressure homogenization on beer processing: A review

Beer is the most consumed beverage in the world, especially in countries such as USA, China and Brazil.It is an alcoholic beverage made from malted cereals, and the barley malt is the main ingredient, added with water, hops and yeast. High-pressure processing is a non-traditional method to preserve food and beverages. This technology has become more interesting compared to heat pasteurization, due to the minimal changes it brings to the original nutritional and sensory characteristics of the product, and it comprises two processes: high hydrostatic pressure, which is the most industrially used process, and high-pressure homogenization. The use of high pressure almost does not affect the molecules that are responsible for the aroma and taste, pigments and vitamins compared to the conventional thermal processes. Thus, the products processed by high-pressure processing have similar characteristics compared to fresh products, including beer. The aim of this paper was to review what has been investigated about beer processing using this technology regarding the effects on physicochemical, microbiology and sensory characteristics and related issues. It is organized by processing steps, since high pressure can be applied to malting, mashing, boiling, filtration and pasteurization. Therefore, the beer processed with high-pressure processing may have an extended shelf-life because this process can inactivate beer spoilage microorganisms and result in a superior sensory quality related to freshness and preservation of flavors as it does to juices that are already commercialized. However, beyond this application, high-pressure processing can modify protein structures, such as enzymes that are present in the malt, like α- and β-amylases. This process can activate enzymes to promote, for example, saccharification, or instead inactivate at the end of mashing, depending on the pressure the product is submitted, besides being capable of isomerizing hops to raise beer bitterness. As a consequence, the process may reduce steam demand and residue generation. Therefore, the use of high-pressure processing can potentially replace or be combined with heat processes usually applied to beer, thus bringing benefits to the sensory quality of the product and to the environment.

Effect of high-pressure homogenization on different matrices of food supplements

There is a growing demand for food supplements containing high amounts of vitamins, phenolic compounds and mineral content that provide health benefits. Those functional compounds have different solubility properties, and the maintenance of their compounds and the guarantee of their homogenic properties need the application of novel technologies. The quality of different drinkable functional foods after thermal processing (0.1 MPa) or high-pressure homogenization under two different conditions (80 MPa, 33 ℃ and 120 MPa, 43 ℃) was studied. Physicochemical characteristics and sensory qualities were evaluated throughout the six months of accelerated storage at 40 ℃ and 75% relative humidity (RH). Aroma and color were better maintained in high-pressure homogenization-treated samples than the thermally treated ones, which contributed significantly to extending their shelf life. The small particle size obtained after high-pressure homogenization treatments caused differences in turbidity and viscosity with respect to heat-treated samples. The use of high-pressure homogenization, more specifically, 120 MPa, provided active ingredient homogeneity to ensure uniform content in functional food supplements. Although the effect of high-pressure homogenization can be affected by the food matrix, high-pressure homogenization can be implemented as an alternative to conventional heat treatments in a commercial setting within the functional food supplement or pharmaceutical industry.