Fabrication and characterization of bi-crosslinking Pickering emulsions stabilized by gliadin/alginate coacervate particles

Characterization and stability evaluation of Ca2+ cross-linked soybean protein isolate/chitosan/sodium alginate ternary complex coacervate phase

To improve the stability of the soybean protein isolate/chitosan/sodium alginate ternary complex coacervate phase against environmental pH and ionic strength, the complex ternary phase cross-linked by Ca²⁺ was characterized and evaluated. The viscoelastic properties, thermal properties, microstructure, and texture profile were characterized using rheology, differentia scanning calorimetry as well as thermmogravimetric analysis, scanning electron microscopy as well as transmission electron microscopy, and texture profile analysis, respectively. Compared with the uncross-linked ternary complex coacervate, the complex in situ cross-linked with 1.0 % Ca²⁺ for 1 h still retains its typical solid characteristics, and has a more compact network structure and better stability. Our research results also showed that prolonging the cross-linking time (from 3 h to 5 h) and increasing the concentration of the cross-linking agent (from 1.5 % to 2.0 %) did not further improve the rheological, thermodynamic and textural properties of the complex coacervate. The ternary complex coacervate phase cross-linked in situ under 1.5 % concentration of Ca²⁺ for 3 h showed significantly improved stability at low pH 1.5-3.0, which indicats that the ternary complex coacervate phase cross-linked in situ by Ca²⁺ can be used as a potential delivery platform for the effective delivery of biomolecules under physiological conditions.

Investigation and Characterization of Pickering Emulsion Stabilized by Alkali-Treated Zein (AZ)/Sodium Alginate (SA) Composite Particles

Pickering emulsions stabilized by food-grade colloidal particles have attracted increasing attention in recent years due to their "surfactant-free" nature. In this study, the alkali-treated zein (AZ) was prepared via restricted alkali deamidation and then combined with sodium alginate (SA) in different ratios to obtain AZ/SA composite particles (ZS), which were used to stabilize Pickering emulsion. The degree of deamidation (DD) and degree of hydrolysis (DH) of AZ were 12.74% and 6.58% respectively, indicating the deamidation occurred mainly in glutamine on the side chain of the protein. After the treatment with alkali, AZ particle size decreased significantly. Moreover, the particle size of ZS with different ratios was all less than 80 nm. when the AZ/SA ratio was 2:1(Z2S1) and 3:1(Z3S1), the three-phase contact angle (θ_o/w) were close to 90°, which was favorable for stabilizing the Pickering emulsion. Furthermore, at a high oil phase fraction (75%), Z3S1-stabilized Pickering emulsions showed the best long-term storage stability within 60 days. Confocal laser scanning microscope (CLSM) observations showed that the water-oil interface was wrapped by a dense layer of Z3S1 particles with non-agglomeration between independent oil droplets. At constant particle concentration, the apparent viscosity of the Pickering emulsions stabilized by Z3S1 gradually decreased with increasing oil phase fraction, and the oil-droplet size and the Turbiscan stability index (TSI) also gradually decreased, exhibiting solid-like behavior. This study provides new ideas for the fabrication of food-grade Pickering emulsions and will extend the future applications of zein-based Pickering emulsions as bioactive ingredient delivery systems.

Fabrication and stabilization mechanisms of Pickering emulsions based on gliadin/arabinoxylan complexes

In the present work, the Pickering emulsions with enhanced oxidation stability were fabricated using gliadin (G)/arabinoxylan nanoparticles (GANPs). The influence of different G/AX ratios on the properties of GANPs and corresponding physicochemical characteristics of Pickering emulsions were investigated. Results indicated that the droplet size and ζ-potential of Pickering emulsions declined with the decrease of G/AX ratios. Pickering emulsion with the smallest G/AX ratio (1:4) exhibited excellent oxidative and coalescence stability due to the formation of viscoelastic gel network, which was supported by confocal laser scanning microscopy (CLSM) images. Furthermore, the increase of salt ions in a lower concentration (0-0.2 M) was conducive to the flocculation of the droplets, while further increasing the NaCl concentration impaired the emulsion stability. Such elements revealed that G/AX complex is a promising stabilizer of Pickering emulsions with prominent antioxidant activity, which have favorable potential applications in protecting the functional properties of polyunsaturated fatty acids (PUFAs).

Enzymatically modified quinoa starch-based Pickering emulsion: Effect of enzymolysis and emulsifying conditions

Both the effects of enzymolysis condition on the microstructures and emulsifying property of enzymatic modified quinoa starch (EMQS) and the effects of emulsion formulation on the EMQS based emulsions were investigated. The emulsifying capacity (EC) and stability (ES) of EMQS were positive correlated with enzyme amount (0-2.4 % w/w_starch). The particle sizes of EMQS decreased and its hydrophobicity increased with increasing enzyme amount (0-2.4 % w/w_starch), which were the main reasons for the increasing emulsifying performance of EMQS. With the increasing starch concentration, the EC of the EMQS increased, the oil droplet size of the emulsion decreased. With the oil/water ratios ranging from 1:9 to 6:4, the emulsification index (EI) and oil droplet size of the emulsion increased. EMQS based emulsion had a relatively good stability in the pH range of 2-10. This study lays the foundation for the application of EMQS as a stable clean-label Pickering emulsifier.

Study on stability of grape seed oil/rice hydrolyzed protein emulsion

In this study, the stability mechanism of grape seed oil/rice hydrolyzed protein emulsion was studied. The grape seed oil (10% v/v) and rice hydrolyzed protein (2% w/v) were homogenized under high pressure to prepare the emulsion. It was observed by CLSM and Multiple light scatterometer that the emulsion had long-term storage stability, and the average particle size of droplets was 0.984–1.363 µm. ζ-potential ranged from −37.733 mV to −25.633 mV. It is found that the emulsion has strong resistance to temperature, ions and other environmental factors from the macroscopic and microscopic structure, and no emulsion stratification phenomenon occurs. The composite emulsion can be used in the field of food industry and fine chemical industry, which can provide nutrition and functionality of products, its research has certain value and has a wide space for development.

The modification of collagen with biosustainable POSS graft oxidized sodium alginate composite

As a kind of renewable biological resource, leather collagen is the raw material of leather industry. The chrome tanning modified collagen has high humidity and heat resistance, but there are some defects such as environmental pollution, harm to human health and shortage of chromium resources, so it is urgent to research chromium-free tanning to achieve clean modified colloidal. In the chromium-free tanning system, the modification of skin fibrin by bio-based material has the significance of environmental protection. Sodium alginate can be used as crosslinking agent to stabilize collagen. In this study, the polyhedral oligomeric silsesquioxane (POSS) grafted oxidized sodium alginate polymer composite (POSS-OSA-MAA) containing aldehyde group was prepared by two steps. Firstly, POSS grafted sodium alginate polymer composite (POSS-SAG-MAA) was prepared by graft polymerization with POSS, sodium alginate (SAG) and methacrylic acid (MAA) as raw materials. Then POSS-OSA-MAA was obtained by oxidation of POSS-SAG-MAA with sodium periodate. The aldehyde group highest concentration in POSS-OSA-MAA was 3.26 mmol•g-1, and the tanned leather shrinkage temperature was 73.1 °C. The X-ray photoelectron spectroscopy showed that POSS-OSA-MAA could form Schiff base structure with amino-containing substances and form multiple points crosslinking, and POSS-OSA-MAA could improve the shrinkage temperature and thermal stability of skin collagen.

Carboxymethyl chitosan incorporated with gliadin/phlorotannin nanoparticles enables the formation of new active packaging films

Advanced carboxymethyl chitosan (CMCS) based functional films were fabricated by involving some amounts of gliadin/phlorotannin nanoparticles (GPNPs) using a solution casting method. GPNPs were synthesized by an antisolvent precipitation approach, and they presented a spherical morphology with a mean diameter of 145.30 ± 2.06 nm. The effect of GPNPs concentration on the structural, physical, antioxidant and antimicrobial properties of CMCS-GPNPs (C-G) functional films was evaluated. It was found that the added GPNPs were homogeneously distributed over the whole CMCS matrix, allowing to reduce the free volume of the nanocomposite matrix and subsequently improve the physical properties of the final film (evidenced by mechanical and water barrier properties). FT-IR spectra indicated the intermolecular interactions, such as hydrogen bonds and electrostatic interaction, within the matrix of the nanocomposite films were increased. Impressively, the anti-ultraviolet properties, antioxidant activity and antimicrobial behaviors of the as-formed C-G functional films were greatly enhanced compared to the pure CMCS film. All these results suggested that our as-prepared C-G nanocomposite films could be a promising food packaging material.

Alginate-based delivery systems for food bioactive ingredients: An overview of recent advances and future trends

Due to its advantagessuch as ionic crosslinking, pH responsiveness, excellent biocompatibility, biodegradability and low price, alginate has become one of the most important natural polysaccharides extensively used in constructing desired delivery systems for food bioactive ingredients. In this review, the fundamental knowledge of alginate as a building block for construction of nutraceutical delivery systems is introduced. Then, various types of alginate-based nutraceutical delivery systems are classified and summarized. Furthermore, the future trends of alginate-based delivery systems are highlighted. Currently, alginate-based delivery systems include hydrogel, emulsion, emulsion-filled alginate hydrogel, nanoparticle, microparticle, core-shell particle, liposome, edible film, and aerogel. Although alginate has been widely used in the fabrication of food bioactive ingredient delivery systems, further efforts and improvements are still needed. For this purpose, the future perspectives of alginate-based delivery systems are discussed. The feasible research trends of alginate-based delivery systems include the development of novel large-scale commercial preparation technology, multifunctional delivery system based on alginate, alginate oligosaccharide-based delivery system and alginate-based oleogel. Overall, the objective of this review is to provide useful guidance for rational design and application of alginate-based nutraceutical delivery systems in the future.

Exploration of the Microstructure and Rheological Properties of Sodium Alginate-Pectin-Whey Protein Isolate Stabilized Β-Carotene Emulsions: To Improve Stability and Achieve Gastrointestinal Sustained Release

Sodium alginate (SA)-pectin (PEC)-whey protein isolate (WPI) complexes were used as an emulsifier to prepare β-carotene emulsions, and the encapsulation efficiency for β-carotene was up to 93.08%. The confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM) images showed that the SA-PEC-WPI emulsion had a compact network structure. The SA-PEC-WPI emulsion exhibited shear-thinning behavior and was in a semi-dilute or weak network state. The SA-PEC-WPI stabilized β-carotene emulsion had better thermal, physical and chemical stability. A small amount of β-carotene (19.46 ± 1.33%) was released from SA-PEC-WPI stabilized β-carotene emulsion in simulated gastric digestion, while a large amount of β-carotene (90.33 ± 1.58%) was released in simulated intestinal digestion. Fourier transform infrared (FTIR) experiments indicated that the formation of SA-PEC-WPI stabilized β-carotene emulsion was attributed to the electrostatic and hydrogen bonding interactions between WPI and SA or PEC, and the hydrophobic interactions between β-carotene and WPI. These results can facilitate the design of polysaccharide-protein stabilized emulsions with high encapsulation efficiency and stability for nutraceutical delivery in food and supplement products.