Textural and sensory qualities of low-calorie surimi with carrageenan inserted as a protein substitute using coaxial extrusion 3D food printing

Quality Evaluation of Chicken Liver Pâté Affected by Algal Hydrocolloids Addition: A Textural and Rheological Approach

Hydrocolloids are used in spreadable meat or poultry products to improve consistency, emulsion stability and water retention, resulting in products with desired functional and organoleptic properties. The scope of the work was to evaluate the addition of three divergent algal hydrocolloids (κ-carrageenan, ι-carrageenan, furcellaran) at four different concentrations (0.25, 0.50, 0.75, and 1.00% w/w) on the physicochemical, textural, rheological and organoleptic properties of model chicken liver pâté (CLP) samples. Overall, the highest hardness and viscoelastic moduli values of the CLP samples were reported when κ-carrageenan and furcellaran were utilized at a concentration of 0.75% w/w (p < 0.05). Furthermore, increasing the concentrations of the utilized hydrocolloids led to increase in the viscoelastic moduli and hardness values of CLP. Compared to the control sample, an increase in spreadability was reported in the CLP samples with the addition of hydrocolloids. Finally, the use of algal hydrocolloids proved to be an effective way to modify the techno-functional properties of CLP.

Unconventional sourced proteins in 3D and 4D food printing: Is it the future of food processing?

Following consumer trends and market needs, the food industry has expanded the use of unconventional sources to obtain proteins. In parallel, 3D and 4D food printing have emerged with the potential to enhance food processing. While 3D and 4D printing technologies show promising prospects for improving the performance and applicability of unconventional sourced proteins (USP) in food, this combination remains relatively unexplored. This review aims to provide an overview of the application of USP in 3D and 4D printing, focusing on their primary sources, composition, rheological, and technical-functional properties. The drawbacks, challenges, potentialities, and prospects of these technologies in food processing are also examined. This review underscores the current necessity for greater regulation of food products processed by 3D and 4D printing. The data presented here indicate that 3D and 4D printing represent viable, sustainable, and innovative alternatives for the food industry, emphasizing the potential for further exploration of 4D printing in food processing. Additional studies are warranted to explore their application with unconventional proteins.

Personalized nutrition with 3D-printed foods: A systematic review on the impact of different additives

Three-dimensional (3D) printing is one of the world's top novel technologies in the food industry due to the production of food in different conditions and places (restaurants, homes, catering, schools, for dysphagia patients, and astronauts' food) and the production of personalized food. Nowadays, 3D printers are used in the main food industries, including meat, dairy, cereals, fruits, and vegetables, and have been able to produce successfully on a small scale. However, due to the expansion of this technology, it has challenges such as high-scale production, selection of printable food, formulation optimization, and food production according to the consumer's opinion. Food additives (gums, enzymes, proteins, starches, polyphenols, spices, probiotics, algae, edible insects, oils, salts, vitamins, flavors, and by-products) are one of the main components of the formulation that can be effective in food production according to the consumer's attitude. Food additives can have the highest impact on textural and sensory characteristics, which can be effective in improving consumer attitudes and reducing food neophobia. Most of the 3D-printed food cannot be printed without the presence of hydrocolloids, because the proper flow of the selected formulation is one of the key factors in improving the quality of the printed product. Functional additives such as probiotics can be useful for specific purposes and functional food production. Food personalization for specific diseases with 3D printing technology requires a change in the formulation, which is closely related to the selection of correct food additives. For example, the production of 3D-printed plant-based steaks is not possible without the presence of additives, or the production of food for dysphagia patients is possible in many cases by adding hydrocolloids. In general, additives can improve the textural, rheological, nutritional, and sensory characteristics of 3D printed foods; so, investigating the mechanism of the additives on all the characteristics of the printed product can provide a wide perspective for industrial production and future studies.

Evaluation of the Improvement Effect of Whey Protein Poly-Peptides on Quality Characteristics of Repeated Freeze-Thawed Spanish Mackerel Surimi Balls

This investigation aimed to assess the effects of whey protein hydrolysate (WPH) on the oxidative stability of protein and the ability of Scomberomorus niphoniu surimi balls to retain water after repeated freeze-thaw (F-T) cycles. Ten percent natural whey peptides (NWP), 5% WPH, 10% WPH, 15% WPH, 0.02% butyl hydroxyl anisole (BHA), and a control group that did not receive any treatment were the six groups that were employed in the experiment. The cooking loss, water retention, total sulfhydryl content, and carbonyl content of each group were all measured. Notably, it was found that the surimi balls' capacity to hold onto water and fend off oxidation was enhanced in a dose-dependent manner by the addition of WPH. Furthermore, the results showed that the 15% WPH added to the surimi balls effectively decreased protein oxidation in the F-T cycles and ameliorated the texture deterioration of surimi balls induced by repeated F-T, laying a theoretical foundation for the industrial application of WPH in surimi products.

Exploring the potential of bacterial cellulose paste as a fat replacer for low-fat plant-based hamburger patties

Plant-based hamburger patties (PHPs) with reduced fat content made using fat replacers will meet the consumption goals of individuals who consume meat alternative products for health. In this study, we developed a dual-alternative food model by analysing the applicability of bacterial cellulose paste (BCP) as a fat replacer and supplementing it in PHPs. BCPs were prepared with solid contents of (w/w; 1.0%, 1.5%, 2.0%, 2.5%, and 3.0%) and compared and analyzed with three types of conventional vegetable [coconut oil, margarine, and shortening (SH)] and animal fats (beef tallow, butter, and lard) for various characteristics (appearance, dimensional stability, hardness level, and rheological properties). According to the results, BCP with a solid content of 3.0% (w/w) had the most similar characteristics to SH. Therefore, using SH as a control fat, PHPs in which 0%, 25%, 50%, 75%, and 100% (w/w) SH were replaced by 3.0% (w/w) BCP were prepared. Analysis of the appearance, instrumental color, diameter reduction, thickness, cooking loss, and texture profile of the PHPs, confirmed that replacement of 25%-50% (w/w) SH with 3.0% (w/w) BCP in the preparation of PHP resulted in i) redder color, ii) better dimensional stability, iii) lower cooking loss, and iv) higher chewiness of the final products. The results of the sensory evaluation showed that the PHPs, with 25%-50% (w/w) SH replaced with 3.0% (w/w) BCP, exhibited no significant differences (p < 0.05) in overall preference scores compared to the full-SH sample. In conclusion, this study demonstrated the potential of BCP as a fat substitute for the production of PHPs.

Effect of к-carrageenan on saltiness perception and texture characteristic related to salt release in low-salt surimi

The purpose of this study was to investigate the effect of Kappa (к)-carrageenan on texture and perception of saltiness of low salt surimi. The low-field nuclear magnetic resonance (LF-NMR) and microstructure results showed that к-carrageenan could promote the formation of more immobilized water in low salt surimi gel, change its matrix structure, and lead to the uneven spatial distribution of sodium, thus enhancing saltiness perception. The rheological properties of surimi showed that к-carrageenan could increase the network strength of low salt surimi gel and improve its thermostability. Furthermore, the low salt surimi gel added with к-carrageenan has lower cooking loss, higher water holding capacity (WHC), gel strength and improved texture properties. Therefore, к-carrageenan has the effects of improving the quality and increasing salt perception of surimi gel. This study provides a new method for reducing salt consumption in food industry.

Current and emerging applications of carrageenan in the food industry

Carrageenan, a polysaccharide derived from red algae, has a long history of use as a food additive in food. Carrageenan comes in three classes, κ-, ι-, and λ-carrageenan, with different properties attributed to their organosulfate substitution levels, and their interactions with other food components give rise to properties such as water holding, thickening, gelling, and stabilizing. Over the years, carrageenan has been used in wide variety of food products such as meat, dairy, and flour-based products, and their mechanisms and functions in these matrices have also been studied. With the emergence of novel food technologies, carrageenan's potential applications have been extensively explored alongside, including encapsulation, edible films/coatings, plant-based analogs, and 3D/4D printing. As the food technology evolves, the required functions of food ingredients have changed, and carrageenan is being investigated for its role in these new areas. However, there are many similarities in the use of carrageenan in both classic and emerging applications, and understanding the underlying principles of carrageenan will lead to a proper use of carrageenan in emerging food products. This review focuses on the potential of carrageenan as a food ingredient in these emerging technologies mainly based on papers published within the past five years, highlighting its functions and applications to better understand its role in food products.

Enrichment of 3D-Printed k-Carrageenan Food Gel with Callus Tissue of Narrow-Leaved Lupin Lupinus angustifolius

The aim of the study is to develop and evaluate the printability of k-carrageenan inks enriched with callus tissue of lupin (L. angustifolius) and to determine the effect of two lupin calluses (LA14 and LA16) on the texture and digestibility of 3D-printed gel. The results demonstrated that the enriched ink was successfully 3D printed at concentrations of 33 and 50 g/100 mL of LA14 callus and 33 g/100 mL of LA16 callus. The feasibility of 3D printing is extremely reduced at higher concentrations of callus material in the ink. The hardness, cohesiveness, and gumminess of the 3D-printed gel with LA16 callus were weakened compared to the gel with LA14 callus. The results of rheological measurements showed that an increase in the content of LA16 callus interfered with the formation of a k-carrageenan gel network, while LA14 callus strengthened the k-carrageenan gel with increasing concentration. Gel samples at different concentrations of LA14 and LA16 calluses formed a spongy network structure, but the number of pores decreased, and their size increased, when the volume fraction occupied by LA14 and LA16 calluses increased. Simple polysaccharides, galacturonic acid residues, and phenolic compounds (PCs) were released from A-FP gels after sequential in vivo oral and in vitro gastrointestinal digestion. PCs were released predominantly in the simulated intestinal and colonic fluids. Thus, incorporating lupin callus into the hydrocolloid ink for food 3D printing can be a promising approach to developing a gelling material with new mechanical, rheological, and functional properties.